diff options
Diffstat (limited to 'src/wimax/iwmxsdk.c')
| -rw-r--r-- | src/wimax/iwmxsdk.c | 1479 |
1 files changed, 0 insertions, 1479 deletions
diff --git a/src/wimax/iwmxsdk.c b/src/wimax/iwmxsdk.c deleted file mode 100644 index dd78d5a4..00000000 --- a/src/wimax/iwmxsdk.c +++ /dev/null @@ -1,1479 +0,0 @@ -/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */ -/* - * - * Copyright (C) 2011 Red Hat, Inc. All rights reserved. - * Copyright (C) 2007-2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <stdio.h> -#include <stdlib.h> -#include <errno.h> -#include <string.h> -#include <net/if.h> - -#include <glib.h> - -#include <WiMaxType.h> -#include <WiMaxAPI.h> -#include <WiMaxAPIEx.h> - -#include "logging/nm-logging.h" -#include "iwmxsdk.h" - -static WIMAX_API_DEVICE_ID g_api; -static GStaticMutex add_remove_mutex = G_STATIC_MUTEX_INIT; - -/* Misc utilities */ -#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0])) - -/* Misc values */ -enum { - /* - * WARNING!!!!! - * - * ONLY ONE DEVICE SUPPORTED - * - * - on removal, there is no way to know which device was - * removed (the removed device is removed from the list and - * the callback doesn't have any more information than the - * index in the list that getlistdevice would return -- racy - * as hell). - * - * - on insertion, there is not enough information provided. - */ - IWMX_SDK_DEV_MAX = 1, -}; - -/* Yes, this is dirty; see above on IWMX_SDK_DEV_MAX */ -static struct wmxsdk *g_iwmx_sdk_devs[IWMX_SDK_DEV_MAX]; - -static struct wmxsdk *deviceid_to_wmxsdk(WIMAX_API_DEVICE_ID *device_id) -{ - unsigned cnt; - for (cnt = 0; cnt < IWMX_SDK_DEV_MAX; cnt++) { - struct wmxsdk *wmxsdk = g_iwmx_sdk_devs[cnt]; - if (wmxsdk && - wmxsdk->device_id.deviceIndex == device_id->deviceIndex) - return wmxsdk; - } - return NULL; -} - -static int deviceid_to_index(WIMAX_API_DEVICE_ID *device_id) -{ - unsigned cnt; - - for (cnt = 0; cnt < IWMX_SDK_DEV_MAX; cnt++) { - struct wmxsdk *wmxsdk = g_iwmx_sdk_devs[cnt]; - if (wmxsdk && wmxsdk->device_id.deviceIndex == device_id->deviceIndex) - return cnt; - } - return -1; -} - -struct wmxsdk *iwmx_sdk_get_wmxsdk_for_iface(const char *iface) -{ - unsigned cnt; - - for (cnt = 0; cnt < IWMX_SDK_DEV_MAX; cnt++) { - struct wmxsdk *wmxsdk = g_iwmx_sdk_devs[cnt]; - if (wmxsdk && !strcmp(wmxsdk->ifname, iface)) - return wmxsdk; - } - return NULL; -} - -/* - * FIXME: pulled it it out of some hole - * - * the cinr to percentage computation comes from the L3/L4 doc - * - * But some other places (L4 code) have a more complex, seemingly - * logarithmical computation. - * - * Oh well... - * - */ -static int cinr_to_percentage(int cinr) -{ - int strength; - if (cinr <= -5) - strength = 0; - else if (cinr >= 25) - strength = 100; - else /* Calc percentage on the value from -5 to 25 */ - strength = ((100UL * (cinr - -5)) / (25 - -5)); - return strength; -} - -/**************************************************************/ - -typedef struct { - WimaxNewWmxsdkFunc callback; - void *user_data; -} NewSdkCallback; - -GStaticMutex new_callbacks_mutex = G_STATIC_MUTEX_INIT; -static GSList *new_callbacks = NULL; - -void iwmx_sdk_new_callback_register(WimaxNewWmxsdkFunc callback, void *user_data) -{ - NewSdkCallback *cb; - - cb = g_malloc0 (sizeof (NewSdkCallback)); - g_assert (cb); - cb->callback = callback; - cb->user_data = user_data; - - g_static_mutex_lock (&new_callbacks_mutex); - new_callbacks = g_slist_append (new_callbacks, cb); - g_static_mutex_unlock (&new_callbacks_mutex); -} - -void iwmx_sdk_new_callback_unregister(WimaxNewWmxsdkFunc callback, void *user_data) -{ - GSList *iter; - NewSdkCallback *found = NULL; - - g_static_mutex_lock (&new_callbacks_mutex); - for (iter = new_callbacks; iter; iter = g_slist_next (iter)) { - NewSdkCallback *cb = iter->data; - - if (cb->callback == callback && cb->user_data == user_data) { - found = cb; - break; - } - } - - if (found) { - new_callbacks = g_slist_remove (new_callbacks, found); - g_free (found); - } - g_static_mutex_unlock (&new_callbacks_mutex); -} - -static void iwmx_sdk_call_new_callbacks(struct wmxsdk *wmxsdk) -{ - GSList *iter; - - g_static_mutex_lock (&new_callbacks_mutex); - for (iter = new_callbacks; iter; iter = g_slist_next (iter)) { - NewSdkCallback *cb = iter->data; - - cb->callback (wmxsdk, cb->user_data); - } - g_static_mutex_unlock (&new_callbacks_mutex); -} - -/****************************************************************/ - -typedef struct { - struct wmxsdk *wmxsdk; - WIMAX_API_DEVICE_STATUS new_status; - WIMAX_API_DEVICE_STATUS old_status; - WIMAX_API_STATUS_REASON reason; -} StateChangeInfo; - -static gboolean -state_change_handler(gpointer user_data) -{ - StateChangeInfo *info = user_data; - - if (info->wmxsdk->state_change_cb) { - info->wmxsdk->state_change_cb(info->wmxsdk, - info->new_status, - info->old_status, - info->reason, - info->wmxsdk->callback_data); - } - wmxsdk_unref(info->wmxsdk); - memset(info, 0, sizeof(*info)); - free(info); - return FALSE; -} - -static void -_schedule_state_change(struct wmxsdk *wmxsdk, - WIMAX_API_DEVICE_STATUS new_status, - WIMAX_API_DEVICE_STATUS old_status, - WIMAX_API_STATUS_REASON reason) -{ - StateChangeInfo *info; - - info = malloc(sizeof (*info)); - if (!info) - return; - - memset(info, 0, sizeof(*info)); - info->wmxsdk = wmxsdk; - info->new_status = new_status; - info->old_status = old_status; - info->reason = reason; - - wmxsdk_ref(wmxsdk); - g_idle_add(state_change_handler, info); -} - -typedef struct { - struct wmxsdk *wmxsdk; - WIMAX_API_MEDIA_STATUS media_status; -} MediaStatusInfo; - -static gboolean -media_status_change_handler(gpointer user_data) -{ - MediaStatusInfo *info = user_data; - - if (info->wmxsdk->media_status_cb) { - info->wmxsdk->media_status_cb(info->wmxsdk, - info->media_status, - info->wmxsdk->callback_data); - } - wmxsdk_unref(info->wmxsdk); - memset(info, 0, sizeof(*info)); - free(info); - return FALSE; -} - -static void -_schedule_media_status_change(struct wmxsdk *wmxsdk, - WIMAX_API_MEDIA_STATUS media_status) -{ - MediaStatusInfo *info; - - info = malloc(sizeof (*info)); - if (!info) - return; - - memset(info, 0, sizeof(*info)); - info->wmxsdk = wmxsdk; - info->media_status = media_status; - - wmxsdk_ref(wmxsdk); - g_idle_add(media_status_change_handler, info); -} - -typedef struct { - struct wmxsdk *wmxsdk; - WIMAX_API_NETWORK_CONNECTION_RESP result; -} ConnectResultInfo; - -static gboolean -connect_result_handler(gpointer user_data) -{ - ConnectResultInfo *info = user_data; - - if (info->wmxsdk->connect_result_cb) { - info->wmxsdk->connect_result_cb(info->wmxsdk, - info->result, - info->wmxsdk->callback_data); - } - wmxsdk_unref(info->wmxsdk); - memset(info, 0, sizeof(*info)); - free(info); - return FALSE; -} - -static void -_schedule_connect_result(struct wmxsdk *wmxsdk, - WIMAX_API_NETWORK_CONNECTION_RESP resp) -{ - ConnectResultInfo *info; - - info = malloc(sizeof (*info)); - if (!info) - return; - - memset(info, 0, sizeof(*info)); - info->wmxsdk = wmxsdk; - info->result = resp; - - wmxsdk_ref(wmxsdk); - g_idle_add(connect_result_handler, info); -} - -typedef struct { - struct wmxsdk *wmxsdk; - WIMAX_API_NSP_INFO_EX *nsps; - guint num_nsps; -} ScanResultInfo; - -static gboolean -scan_result_handler(gpointer user_data) -{ - ScanResultInfo *info = user_data; - - if (info->wmxsdk->scan_result_cb) { - info->wmxsdk->scan_result_cb(info->wmxsdk, - info->nsps, - info->num_nsps, - info->wmxsdk->callback_data); - } - wmxsdk_unref(info->wmxsdk); - free(info->nsps); - memset(info, 0, sizeof(*info)); - free(info); - return FALSE; -} - -static void -_schedule_scan_result(struct wmxsdk *wmxsdk, - WIMAX_API_NSP_INFO_EX *nsps, - guint num_nsps) -{ - ScanResultInfo *info; - size_t nsps_size; - int i, tmp; - - info = malloc(sizeof (*info)); - if (!info) - return; - - memset(info, 0, sizeof(*info)); - info->wmxsdk = wmxsdk; - - nsps_size = num_nsps * sizeof (WIMAX_API_NSP_INFO_EX); - info->nsps = malloc(nsps_size); - memcpy(info->nsps, nsps, nsps_size); - info->num_nsps = num_nsps; - - /* CAPI may report link quality as zero -- if it does check if it is a bug - * by computing it based on CINR. If it is different, use the computed one. - */ - for (i = 0; i < num_nsps; i++) { - WIMAX_API_NSP_INFO_EX *nsp = &info->nsps[i]; - - if (nsp->linkQuality == 0) { - tmp = cinr_to_percentage(nsp->CINR - 10); - if (tmp != nsp->linkQuality) - nsp->linkQuality = tmp; - } - } - - wmxsdk_ref(wmxsdk); - g_idle_add(scan_result_handler, info); -} - -static gboolean -removed_handler(gpointer user_data) -{ - struct wmxsdk *wmxsdk = user_data; - - if (wmxsdk->removed_cb) - wmxsdk->removed_cb(wmxsdk, wmxsdk->callback_data); - wmxsdk_unref(wmxsdk); - return FALSE; -} - -static void -_schedule_removed(struct wmxsdk *wmxsdk) -{ - wmxsdk_ref(wmxsdk); - g_idle_add(removed_handler, wmxsdk); -} - -/****************************************************************/ - -/* - * Convert a WiMAX API status to an string. - */ -const char *iwmx_sdk_dev_status_to_str(WIMAX_API_DEVICE_STATUS status) -{ - switch (status) { - case WIMAX_API_DEVICE_STATUS_UnInitialized: - return "uninitialized"; - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW_SW: - return "rf off"; - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW: - return "rf off (hard-block)"; - case WIMAX_API_DEVICE_STATUS_RF_OFF_SW: - return "rf off (soft-block)"; - case WIMAX_API_DEVICE_STATUS_Ready: - return "ready"; - case WIMAX_API_DEVICE_STATUS_Scanning: - return "scanning"; - case WIMAX_API_DEVICE_STATUS_Connecting: - return "connecting"; - case WIMAX_API_DEVICE_STATUS_Data_Connected: - return "connected"; - default: - return "unknown"; - } -} - -const char *iwmx_sdk_reason_to_str(WIMAX_API_STATUS_REASON reason) -{ - switch (reason) { - case WIMAX_API_STATUS_REASON_Normal: - return "normal"; - - /**< Failed to complete NW entry with the selected operator (unspecified reason). */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_to_NW: - return "unspecified failure"; - - /**< Failed to complete ranging */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_Ranging: - return "ranging failed"; - - /**< SBC phase failed */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_SBC: - return "sbc failed"; - - /**< Security error. EAP authentication failed device level */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_EAP_AUTH_Device: - return "EAP device auth failed"; - - /**< Security error. EAP authentication failed user level */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_EAP_AUTH_user: - return "EAP user auth failed"; - - /**< Security error. Handshake failed */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_3_Way_Handshake: - return "3 way handshake failed"; - - /**< Registration failed */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_REG: - return "registration failed"; - - /**< Failed to initialize the data path (failed to perform DSA to one UL and one DL SFs). */ - case WIMAX_API_STATUS_REASON_Fail_to_connect_datapath: - return "datapath failed"; - - default: - return "unknown"; - } -} - -const char *iwmx_sdk_media_status_to_str(WIMAX_API_MEDIA_STATUS status) -{ - switch (status) { - case WIMAX_API_MEDIA_STATUS_LINK_UP: - return "link-up"; - case WIMAX_API_MEDIA_STATUS_LINK_DOWN: - return "link-down"; - case WIMAX_API_MEDIA_STATUS_LINK_RENEW: - return "link-renew"; - default: - return "unknown"; - } -} - -/* - * Get the device's status from the device - * - * Does NOT cache the result - * Does NOT trigger a state change in NetworkManager - * - * Returns < 0 errno code on error, status code if ok. - */ -static WIMAX_API_DEVICE_STATUS iwmx_sdk_get_device_status(struct wmxsdk *wmxsdk) -{ - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - WIMAX_API_DEVICE_STATUS dev_status; - WIMAX_API_CONNECTION_PROGRESS_INFO pi; - - r = GetDeviceStatus(&wmxsdk->device_id, &dev_status, &pi); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot read device state: %d (%s)", r, errstr); - dev_status = -EIO; - } - return dev_status; -} - -/* - * Get the device's status from the device but return a string describing it - * - * Same conditions as iwmx_sdk_get_device_status(). - */ -static const char *iwmx_sdk_get_device_status_str(struct wmxsdk *wmxsdk) -{ - const char *result; - WIMAX_API_DEVICE_STATUS dev_status; - - dev_status = iwmx_sdk_get_device_status(wmxsdk); - if ((int) dev_status < 0) - result = "cannot read device state"; - else - result = iwmx_sdk_dev_status_to_str(dev_status); - return result; -} - -/* - * If the device is connected but we don't know about the network, - * create the knowledge of it. - * - * Asks the WiMAX API to report which NSP we are connected to and we - * create/update a network_el in the device's network list. Then - * return it. - * - * Returns NULL on error. - * - */ -WIMAX_API_CONNECTED_NSP_INFO_EX *iwmx_sdk_get_connected_network(struct wmxsdk *wmxsdk) -{ - WIMAX_API_CONNECTED_NSP_INFO_EX *nsp_info = NULL; - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - nsp_info = malloc(sizeof (*nsp_info)); - if (!nsp_info) { - nm_log_err(LOGD_WIMAX, "wmxsdk: cannot allocate NSP info"); - return NULL; - } - - r = GetConnectedNSPEx(&wmxsdk->device_id, nsp_info); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot get connected NSP info: %d (%s)", r, errstr); - free (nsp_info); - nsp_info = NULL; - } else { - /* Migth be 0 sometimes; fix that up */ - if (nsp_info->linkQuality == 0) { - int linkq_expected = cinr_to_percentage(nsp_info->CINR - 10); - if (linkq_expected != nsp_info->linkQuality) - nsp_info->linkQuality = linkq_expected; - } - } - - return nsp_info; -} - -/* - * Asks the WiMAX API to report current link statistics. - * - * Returns NULL on error. - * - */ -WIMAX_API_LINK_STATUS_INFO_EX *iwmx_sdk_get_link_status_info(struct wmxsdk *wmxsdk) -{ - WIMAX_API_LINK_STATUS_INFO_EX *stats = NULL; - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - /* Only report if connected */ - if (iwmxsdk_status_get(wmxsdk) < WIMAX_API_DEVICE_STATUS_Connecting) { - nm_log_err(LOGD_WIMAX, "wmxsdk: cannot get link status info unless connected"); - return NULL; - } - - stats = malloc(sizeof (*stats)); - if (!stats) { - nm_log_err(LOGD_WIMAX, "wmxsdk: cannot allocate links status info"); - return NULL; - } - - r = GetLinkStatusEx(&wmxsdk->device_id, stats); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot get link status info: %d (%s)", r, errstr); - free (stats); - stats = NULL; - } - - return stats; -} - -/* - * Callback for a RF State command - * - * Called by the WiMAX API when a command sent to change the RF state - * is completed. This is just a confirmation of what happened with the - * command. - * - * We don't do anything, as when the device changes state, the state - * change callback is called and that will fiddle with the NetworkManager - * internals. - */ -static void __iwmx_sdk_rf_state_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_RF_STATE rf_state) -{ - nm_log_dbg(LOGD_WIMAX, "rf_state changed to %d", rf_state); -} - -/* - * Turn the radio on or off - * - * First it checks that we are in the right state before doing - * anything; there might be no need to do anything. - * - * Issue a command to the WiMAX API, wait for a callback confirming it - * is done. Sometimes the callback is missed -- in that case, do force - * a state change evaluation. - * - * Frustration note: - * - * Geezoos efing Xist, they make difficult even the most simple - * of the operations - * - * This thing is definitely a pain. If the radio is ON already - * and you switch it on again...well, there is no way to tell - * because you don't get a callback saying it basically - * suceeded. But on the other hand, if the thing was in a - * different state and action needs to be taken, you have to wait - * for a callback to confirm it's done. However, there is also an - * state change callback, which is almost the same, so now you - * have to handle things in two "unrelated" threads of execution. - * - * How the shpx are you expected to tell the difference? Check - * status first? On timeout? Nice gap (eighteen wheeler size) for - * race conditions. - */ -int iwmx_sdk_rf_state_set(struct wmxsdk *wmxsdk, WIMAX_API_RF_STATE rf_state) -{ - int result; - - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - WIMAX_API_DEVICE_STATUS dev_status; - - g_assert(rf_state == WIMAX_API_RF_ON || rf_state == WIMAX_API_RF_OFF); - - /* Guess what the current radio state is; if it is ON - * already, don't redo it. */ - dev_status = iwmx_sdk_get_device_status(wmxsdk); - if ((int) dev_status < 0) { - result = dev_status; - goto error_get_status; - } - switch (dev_status) { - case WIMAX_API_DEVICE_STATUS_UnInitialized: - result = -EINVAL; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW_SW: - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW: - nm_log_err(LOGD_WIMAX, "wmxsdk: cannot turn on radio: hw switch is off"); - result = -EPERM; - goto error_cant_do; - break; - case WIMAX_API_DEVICE_STATUS_RF_OFF_SW: - if (rf_state == WIMAX_API_RF_OFF) { - result = 0; - nm_log_dbg(LOGD_WIMAX, "radio is already off"); - goto out_done; - } - break; - case WIMAX_API_DEVICE_STATUS_Ready: - case WIMAX_API_DEVICE_STATUS_Scanning: - case WIMAX_API_DEVICE_STATUS_Connecting: - case WIMAX_API_DEVICE_STATUS_Data_Connected: - if (rf_state == WIMAX_API_RF_ON) { - result = 0; - nm_log_dbg(LOGD_WIMAX, "radio is already on"); - goto out_done; - } - break; - default: - g_assert(1); - } - /* Ok, flip the radio */ - r = CmdControlPowerManagement(&wmxsdk->device_id, rf_state); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot flip radio to %d: %d (%s) [device is in state %s]", - rf_state, r, errstr, iwmx_sdk_get_device_status_str(wmxsdk)); - result = -EIO; - } else - result = -EINPROGRESS; -out_done: -error_cant_do: -error_get_status: - return result; -} - -/* - * Read the cached device status - */ -WIMAX_API_DEVICE_STATUS iwmxsdk_status_get(struct wmxsdk *wmxsdk) -{ - WIMAX_API_DEVICE_STATUS status; - - g_mutex_lock(wmxsdk->status_mutex); - status = wmxsdk->status; - g_mutex_unlock(wmxsdk->status_mutex); - return status; -} - -/* - * Callback for a Connect command - * - * Called by the WiMAX API when a command sent to connect is - * completed. This is just a confirmation of what happened with the - * command. - * - * WE DON'T DO MUCH HERE -- the real meat happens when a state change - * callback is sent, where we detect we move to connected state (or - * from disconnecting to something else); the state change callback is - * called and that will fiddle with the NetworkManager internals. - */ -static void __iwmx_sdk_connect_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_NETWORK_CONNECTION_RESP resp) -{ - WIMAX_API_DEVICE_STATUS status; - struct wmxsdk *wmxsdk = deviceid_to_wmxsdk(device_id); - - status = iwmxsdk_status_get(wmxsdk); - if (resp == WIMAX_API_CONNECTION_SUCCESS) { - if (status != WIMAX_API_DEVICE_STATUS_Data_Connected) { - nm_log_err(LOGD_WIMAX, "wmxsdk: error: connect worked, but state" - " didn't change (now it is %d [%s])", - status, - iwmx_sdk_dev_status_to_str(status)); - } - } else { - nm_log_err(LOGD_WIMAX, "wmxsdk: failed to connect (status %d: %s)", - status, iwmx_sdk_dev_status_to_str(status)); - } - - _schedule_connect_result(wmxsdk, resp); -} - -/* - * Connect to a network - * - * This function starts the connection process to a given network; - * when the device changes status, the status change callback will - * tell NetworkManager if the network is finally connected or not. - * - * One of the reasons it is done like that is to allow external tools - * to control the device and the plugin just passing the status so - * NetworkManager displays the right info. - */ -int iwmx_sdk_connect(struct wmxsdk *wmxsdk, const char *nsp_name) -{ - int result = 0; - - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - WIMAX_API_DEVICE_STATUS dev_status; - char sdk_name[MAX_SIZE_OF_NSP_NAME]; - - g_mutex_lock(wmxsdk->connect_mutex); - /* Guess what the current radio state is; if it is ON - * already, don't redo it. */ - dev_status = iwmxsdk_status_get(wmxsdk); - if ((int) dev_status < 0) { - result = dev_status; - goto error_get_status; - } - switch (dev_status) { - case WIMAX_API_DEVICE_STATUS_UnInitialized: - nm_log_err(LOGD_WIMAX, "wmxsdk: SW BUG? HW is uninitialized"); - result = -EINVAL; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW_SW: - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW: - case WIMAX_API_DEVICE_STATUS_RF_OFF_SW: - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot connect: radio is off"); - result = -EPERM; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_Ready: - case WIMAX_API_DEVICE_STATUS_Scanning: - break; - case WIMAX_API_DEVICE_STATUS_Connecting: - nm_log_dbg(LOGD_WIMAX, "Connect already pending, waiting for it"); - result = -EINPROGRESS; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_Data_Connected: - nm_log_err(LOGD_WIMAX, "wmxsdk: BUG? need to disconnect?"); - result = -EINVAL; - goto error_cant_do; - default: - g_assert(1); - } - - /* The SDK treats the network name as wchar_t* while the contents are - * actually just UTF-8... WTF? Hand it a full buffer to work around - * boundary cases where the NSP name contains an odd # of characters. - */ - memset(sdk_name, 0, sizeof (sdk_name)); - memcpy(sdk_name, nsp_name, strlen (nsp_name)); - - /* Ok, do the connection, wait for a callback */ - r = CmdConnectToNetwork(&wmxsdk->device_id, &sdk_name[0], 0, 0); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot connect to network %s: %d (%s) - device is in state '%s'", - nsp_name, r, errstr, - iwmx_sdk_get_device_status_str(wmxsdk)); - result = -EIO; - } - -error_cant_do: -error_get_status: - g_mutex_unlock(wmxsdk->connect_mutex); - return result; -} - -/* - * Callback for a Disconnect command - * - * Called by the WiMAX API when a command sent to connect is - * completed. This is just a confirmation of what happened with the - * command. - * - * When the device changes state, the state change callback is called - * and that will fiddle with the NetworkManager internals. - * - * We just update the result of the command and wake up anybody who is - * waiting for this conditional variable. - */ -static void __iwmx_sdk_disconnect_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_NETWORK_CONNECTION_RESP resp) -{ - struct wmxsdk *wmxsdk = deviceid_to_wmxsdk(device_id); - WIMAX_API_DEVICE_STATUS status; - - status = iwmxsdk_status_get(wmxsdk); - if (resp == WIMAX_API_CONNECTION_SUCCESS) { - if (status == WIMAX_API_DEVICE_STATUS_Data_Connected) { - nm_log_err(LOGD_WIMAX, "wmxsdk: error: disconnect worked, " - "but state didn't change (now it is %d [%s])", status, - iwmx_sdk_dev_status_to_str(status)); - } - } else - nm_log_err(LOGD_WIMAX, "wmxsdk: failed to disconnect (status %d: %s)", - status, iwmx_sdk_dev_status_to_str(status)); -} - -/* - * Disconnect from a network - * - * This function tells the device to disconnect; the state change - * callback will take care of inform NetworkManager's internals. - */ -int iwmx_sdk_disconnect(struct wmxsdk *wmxsdk) -{ - int result; - - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - WIMAX_API_DEVICE_STATUS dev_status; - - g_mutex_lock(wmxsdk->connect_mutex); - /* Guess what the current radio state is; if it is ON - * already, don't redo it. */ - dev_status = iwmx_sdk_get_device_status(wmxsdk); - if ((int) dev_status < 0) { - result = dev_status; - goto error_get_status; - } - switch (dev_status) { - case WIMAX_API_DEVICE_STATUS_UnInitialized: - nm_log_err(LOGD_WIMAX, "wmxsdk: SW BUG? HW is uninitialized"); - result = -EINVAL; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW_SW: - case WIMAX_API_DEVICE_STATUS_RF_OFF_HW: - case WIMAX_API_DEVICE_STATUS_RF_OFF_SW: - nm_log_dbg(LOGD_WIMAX, "Cannot disconnect, radio is off; ignoring"); - result = 0; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_Ready: - case WIMAX_API_DEVICE_STATUS_Scanning: - nm_log_dbg(LOGD_WIMAX, "Cannot disconnect, already disconnected; ignoring"); - result = 0; - goto error_cant_do; - case WIMAX_API_DEVICE_STATUS_Connecting: - case WIMAX_API_DEVICE_STATUS_Data_Connected: - break; - default: - g_assert(1); - } - /* Ok, flip the radio */ - r = CmdDisconnectFromNetwork(&wmxsdk->device_id); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot disconnect from network: %d (%s)", r, errstr); - result = -EIO; - } else - result = -EINPROGRESS; -error_cant_do: -error_get_status: - g_mutex_unlock(wmxsdk->connect_mutex); - return result; -} - -/* - * Turn fast reconnect capability on/off - * - * This function tells wimaxd to turn fast reconnect on or off. - */ -int iwmx_sdk_set_fast_reconnect_enabled(struct wmxsdk *wmxsdk, int enabled) -{ - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - r = SetFastReconnectCapabilityStatus(&wmxsdk->device_id, !!enabled); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot set fast reconnect to %d: %d (%s)", - enabled, r, errstr); - return -EIO; - } - return 0; -} - -static void __iwmx_sdk_media_status_update_cb (WIMAX_API_DEVICE_ID_P device_id, - WIMAX_API_MEDIA_STATUS mediaStatus) -{ - struct wmxsdk *wmxsdk = deviceid_to_wmxsdk(device_id); - - /* Ignore redundant LINK_UP events */ - if ( mediaStatus == WIMAX_API_MEDIA_STATUS_LINK_UP - && wmxsdk->media_status == WIMAX_API_MEDIA_STATUS_LINK_UP) - return; - - wmxsdk->media_status = mediaStatus; - - nm_log_dbg(LOGD_WIMAX, "wmxsdk: media status change to (%d) %s", - mediaStatus, iwmx_sdk_media_status_to_str (mediaStatus)); - - _schedule_media_status_change(wmxsdk, mediaStatus); -} - -/* - * Callback for state change messages - * - * Just pass them to the state transition handler - */ -static void __iwmx_sdk_state_change_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_DEVICE_STATUS status, - WIMAX_API_STATUS_REASON reason, - WIMAX_API_CONNECTION_PROGRESS_INFO pi) -{ - struct wmxsdk *wmxsdk = deviceid_to_wmxsdk(device_id); - WIMAX_API_DEVICE_STATUS old_status; - - nm_log_dbg(LOGD_WIMAX, "wmxsdk: state change to (%d) %s reason (%d) %s", - status, iwmx_sdk_dev_status_to_str (status), - reason, iwmx_sdk_reason_to_str (reason)); - - g_mutex_lock(wmxsdk->status_mutex); - old_status = wmxsdk->status; - wmxsdk->status = status; - g_mutex_unlock(wmxsdk->status_mutex); - - _schedule_state_change(wmxsdk, status, old_status, reason); -} - -/* - * Called by _iwmx_sdk_*scan_cb() when [wide or preferred] scan results - * are available. - * - * From here we update NetworkManager's idea of which networks are available. - */ -static void __iwmx_sdk_scan_common_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_NSP_INFO_EX *nsp_list, - UINT32 nsp_list_size) -{ - struct wmxsdk *wmxsdk = deviceid_to_wmxsdk(device_id); - - g_static_mutex_lock(&wmxsdk->network_mutex); - _schedule_scan_result(wmxsdk, nsp_list, nsp_list_size); - g_static_mutex_unlock(&wmxsdk->network_mutex); -} - -/* - * Called by the WiMAX API when we get a wide scan result - * - * We treat them same as wide, so we just call that. - */ -static void __iwmx_sdk_wide_scan_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_NSP_INFO_EX *nsp_list, - UINT32 nsp_list_size) -{ - __iwmx_sdk_scan_common_cb(device_id, nsp_list, nsp_list_size); -} - -/* - * Called by the WiMAX API when we get a normal (non wide) scan result - * - * We treat them same as wide, so we just call that. - */ -static void __iwmx_sdk_scan_cb(WIMAX_API_DEVICE_ID *device_id, - WIMAX_API_NSP_INFO_EX *nsp_list, - UINT32 nsp_list_size, UINT32 searchProgress) -{ - __iwmx_sdk_scan_common_cb(device_id, nsp_list, nsp_list_size); -} - -/* - * Called to ask the device to scan for networks - * - * We don't really scan as the WiMAX SDK daemon scans in the - * background for us. We just get the results and hand them back via - * the scan_result_cb callback. - */ -int iwmx_sdk_get_networks(struct wmxsdk *wmxsdk) -{ - int result; - - UINT32 nsp_list_length = 10; - WIMAX_API_NSP_INFO_EX nsp_list[10]; /* FIXME: up to 32? */ - - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - r = GetNetworkListEx(&wmxsdk->device_id, nsp_list, &nsp_list_length); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot get network list: %d (%s)", r, errstr); - result = -EIO; - goto error_scan; - } - - if (nsp_list_length == 0) { - nm_log_dbg(LOGD_WIMAX, "no networks"); - } else - __iwmx_sdk_scan_common_cb(&wmxsdk->device_id, nsp_list, - nsp_list_length); - result = 0; -error_scan: - return result; -} - -/* - * Initialize the WiMAX API, register with it, setup callbacks - * - */ -static int iwmx_sdk_setup(struct wmxsdk *wmxsdk) -{ - int result, status; - - WIMAX_API_RET r; - - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - result = -ENFILE; - - /* device_id initialized by iwmx_sdk_dev_add */ - - r = WiMaxDeviceOpen(&wmxsdk->device_id); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot open device: %d (%s)", r, errstr); - goto error_wimaxdeviceopen; - } - - /* - * We scan in auto mode (in the background) - * - * Otherwise is messy -- if we have NetworkManager triggering a scan - * when we call iwmx_nm_scan() -> iwmx_sdk_scan(), most of the - * times that causes a race condition when the UI asks for a - * scan right before displaying the network menu. As there is - * no way to cancel an ongoing scan before connecting, we are - * stuck. So we do auto bg and have iwmx_sdk_scan() just return - * the current network list. - */ - r = SetConnectionMode(&wmxsdk->device_id, - WIMAX_API_CONNECTION_AUTO_SCAN_MANUAL_CONNECT); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot set connectin mode to manual: %d (%s)", r, errstr); - goto error_connection_mode; - } - - r = SubscribeControlPowerManagement(&wmxsdk->device_id, - __iwmx_sdk_rf_state_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to radio change events: %u (%s)", r, errstr); - result = -EIO; - goto error_subscribe_rf_state; - } - - r = SubscribeDeviceStatusChange(&wmxsdk->device_id, - __iwmx_sdk_state_change_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to state chaneg events: %d (%s)", r, errstr); - goto error_subscribe_state_change; - } - - r = SubscribeNetworkSearchWideScanEx(&wmxsdk->device_id, - __iwmx_sdk_wide_scan_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to wide scan events: %d (%s)", r, errstr); - goto error_subscribe_wide_scan; - } - r = SubscribeNetworkSearchEx(&wmxsdk->device_id, __iwmx_sdk_scan_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to scan events: %d (%s)", r, errstr); - goto error_subscribe_scan; - } - - r = SubscribeConnectToNetwork(&wmxsdk->device_id, - __iwmx_sdk_connect_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to connect events: %d (%s)", r, errstr); - goto error_subscribe_connect; - } - - r = SubscribeDisconnectToNetwork(&wmxsdk->device_id, - __iwmx_sdk_disconnect_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to disconnect events: %d (%s)", r, errstr); - goto error_subscribe_disconnect; - } - - r = SubscribeMediaStatusUpdate(&wmxsdk->device_id, __iwmx_sdk_media_status_update_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&wmxsdk->device_id, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot subscribe to media status events: %d (%s)", r, errstr); - goto error_subscribe_media_status; - } - - status = iwmx_sdk_get_device_status(wmxsdk); - if ((int) status < 0) - status = WIMAX_API_DEVICE_STATUS_UnInitialized; - - g_mutex_lock(wmxsdk->status_mutex); - wmxsdk->status = status; - g_mutex_unlock(wmxsdk->status_mutex); - - _schedule_state_change(wmxsdk, - status, - WIMAX_API_DEVICE_STATUS_UnInitialized, - WIMAX_API_STATUS_REASON_Normal); - - return 0; - - UnsubscribeMediaStatusUpdate(&wmxsdk->device_id); -error_subscribe_media_status: - UnsubscribeDisconnectToNetwork(&wmxsdk->device_id); -error_subscribe_disconnect: - UnsubscribeConnectToNetwork(&wmxsdk->device_id); -error_subscribe_connect: - UnsubscribeNetworkSearchEx(&wmxsdk->device_id); -error_subscribe_scan: - UnsubscribeNetworkSearchWideScanEx(&wmxsdk->device_id); -error_subscribe_wide_scan: - UnsubscribeDeviceStatusChange(&wmxsdk->device_id); -error_subscribe_state_change: - UnsubscribeControlPowerManagement(&wmxsdk->device_id); -error_subscribe_rf_state: -error_connection_mode: - WiMaxDeviceClose(&wmxsdk->device_id); -error_wimaxdeviceopen: - return result; -} - -/* - * Called when a device is torn down - * - * Cleanup all that is done in iwmx_sdk_setup(). Remove callbacks, - * unregister from the WiMAX API. - */ -static void iwmx_sdk_remove(struct wmxsdk *wmxsdk) -{ - UnsubscribeMediaStatusUpdate(&wmxsdk->device_id); - UnsubscribeDisconnectToNetwork(&wmxsdk->device_id); - UnsubscribeConnectToNetwork(&wmxsdk->device_id); - UnsubscribeNetworkSearchEx(&wmxsdk->device_id); - UnsubscribeNetworkSearchWideScanEx(&wmxsdk->device_id); - UnsubscribeDeviceStatusChange(&wmxsdk->device_id); - UnsubscribeControlPowerManagement(&wmxsdk->device_id); - WiMaxDeviceClose(&wmxsdk->device_id); -} - -void iwmx_sdk_set_callbacks(struct wmxsdk *wmxsdk, - WimaxStateChangeFunc state_change_cb, - WimaxMediaStatusFunc media_status_cb, - WimaxConnectResultFunc connect_result_cb, - WimaxScanResultFunc scan_result_cb, - WimaxRemovedFunc removed_cb, - void *user_data) -{ - wmxsdk->state_change_cb = state_change_cb; - wmxsdk->media_status_cb = media_status_cb; - wmxsdk->connect_result_cb = connect_result_cb; - wmxsdk->scan_result_cb = scan_result_cb; - wmxsdk->removed_cb = removed_cb; - wmxsdk->callback_data = user_data; -} - -/* Initialize a [zeroed] struct wmxsdk */ -static struct wmxsdk *wmxsdk_new(void) -{ - struct wmxsdk *wmxsdk; - - wmxsdk = malloc(sizeof(*wmxsdk)); - if (wmxsdk) { - memset(wmxsdk, 0, sizeof(*wmxsdk)); - - wmxsdk->refcount = 1; - g_static_mutex_init(&wmxsdk->network_mutex); - - wmxsdk->status = WIMAX_API_DEVICE_STATUS_UnInitialized; - wmxsdk->status_mutex = g_mutex_new(); - g_assert(wmxsdk->status_mutex); - - wmxsdk->connect_mutex = g_mutex_new(); - g_assert(wmxsdk->connect_mutex); - } - return wmxsdk; -} - -struct wmxsdk *wmxsdk_ref(struct wmxsdk *wmxsdk) -{ - g_atomic_int_add(&wmxsdk->refcount, 1); - return wmxsdk; -} - -void wmxsdk_unref(struct wmxsdk *wmxsdk) -{ - if (g_atomic_int_dec_and_test(&wmxsdk->refcount)) { - g_mutex_free(wmxsdk->status_mutex); - g_mutex_free(wmxsdk->connect_mutex); - memset(wmxsdk, 0, sizeof(*wmxsdk)); - free(wmxsdk); - } -} - -static void iwmx_sdk_dev_add(unsigned idx, unsigned api_idx, const char *name) -{ - int ifindex; - struct wmxsdk *wmxsdk; - const char *s; - - if (idx >= IWMX_SDK_DEV_MAX) { - nm_log_err(LOGD_WIMAX, "BUG! idx (%u) >= IWMX_SDK_DEV_MAX (%u)", idx, IWMX_SDK_DEV_MAX); - goto error_bug; - } - if (g_iwmx_sdk_devs[idx] != NULL) { - nm_log_err(LOGD_WIMAX, "BUG! device index %u already enumerated?", idx); - goto error_bug; - } - - wmxsdk = wmxsdk_new(); - if (wmxsdk == NULL) { - nm_log_err(LOGD_WIMAX, "Can't allocate %zu bytes", sizeof(*wmxsdk)); - goto error_bug; - } - - /* - * This depends on a hack in the WiMAX Network Service; it has - * to return, as part of the device name, a string "if:IFNAME" - * where the OS's device name is stored. - */ - s = strstr(name, "if:"); - if (s == NULL - || sscanf(s, "if:%15[^ \f\n\r\t\v]", wmxsdk->ifname) != 1) { - nm_log_err(LOGD_WIMAX, "Cannot extract network interface name off '%s'", - name); - goto error_noifname; - } - nm_log_dbg(LOGD_WIMAX, "network interface name: '%s'", wmxsdk->ifname); - - ifindex = if_nametoindex(wmxsdk->ifname); - if (ifindex <= 0) { - nm_log_err(LOGD_WIMAX, "wxmsdk: %s: cannot find interface index", wmxsdk->ifname); - goto error_noifname; - } - - strncpy(wmxsdk->name, name, sizeof(wmxsdk->name)); - wmxsdk->device_id.privilege = WIMAX_API_PRIVILEGE_READ_WRITE; - wmxsdk->device_id.deviceIndex = api_idx; - - if (iwmx_sdk_setup(wmxsdk) != 0) { - nm_log_err(LOGD_WIMAX, "wxmsdk: %s: cannot set up interface", wmxsdk->ifname); - goto error_setup; - } - - g_iwmx_sdk_devs[idx] = wmxsdk; - - /* Notify listeners of new devices */ - iwmx_sdk_call_new_callbacks (wmxsdk); - return; - -error_setup: -error_noifname: - wmxsdk_unref(wmxsdk); -error_bug: - return; -} - -static void iwmx_sdk_dev_rm(unsigned idx) -{ - struct wmxsdk *wmxsdk; - - if (idx >= IWMX_SDK_DEV_MAX) { - nm_log_err(LOGD_WIMAX, "BUG! idx (%u) >= IWMX_SDK_DEV_MAX (%u)", idx, IWMX_SDK_DEV_MAX); - return; - } - - wmxsdk = g_iwmx_sdk_devs[idx]; - _schedule_removed(wmxsdk); - iwmx_sdk_remove(wmxsdk); - wmxsdk_unref(wmxsdk); - g_iwmx_sdk_devs[idx] = NULL; -} - -static void iwmx_sdk_addremove_cb(WIMAX_API_DEVICE_ID *devid, - BOOL presence) -{ - unsigned int cnt; - WIMAX_API_RET r; - WIMAX_API_HW_DEVICE_ID device_id_list[5]; - UINT32 device_id_list_size = ARRAY_SIZE(device_id_list); - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - g_static_mutex_lock(&add_remove_mutex); - - nm_log_dbg(LOGD_WIMAX, "cb: handle %u index #%u is %d", devid->sdkHandle, - devid->deviceIndex, presence); - - r = GetListDevice(devid, device_id_list, &device_id_list_size); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(devid, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot obtain list of devices: %d (%s)", r, errstr); - goto out; - } - - if (device_id_list_size == 0) { - nm_log_dbg(LOGD_WIMAX, "No WiMAX devices reported"); - } else { - for (cnt = 0; cnt < device_id_list_size; cnt++) { - WIMAX_API_HW_DEVICE_ID *dev = - device_id_list + cnt; - nm_log_dbg(LOGD_WIMAX, "#%u index #%u device %s", cnt, - dev->deviceIndex, dev->deviceName); - } - } - - if (presence) { - WIMAX_API_HW_DEVICE_ID *dev; - - /* Make sure the wimax NS isn't lying to us */ - if (device_id_list_size < devid->deviceIndex) { - nm_log_err(LOGD_WIMAX, "wmxsdk: changed device (%u) not in the list? (%u items)", - devid->deviceIndex, device_id_list_size); - goto out; - } - - /* Add the device to our internal list */ - dev = device_id_list + devid->deviceIndex; - iwmx_sdk_dev_add(devid->deviceIndex, dev->deviceIndex, dev->deviceName); - } else { - /* Remove the device from our internal list */ - cnt = deviceid_to_index(devid); - if (cnt >= 0) - iwmx_sdk_dev_rm(cnt); - } - -out: - g_static_mutex_unlock(&add_remove_mutex); -} - -/* - * Initialize the WiMAX API, register with it, setup callbacks for - * device coming up / dissapearing - */ -int iwmx_sdk_api_init(void) -{ - int result; - unsigned int cnt; - WIMAX_API_RET r; - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - WIMAX_API_HW_DEVICE_ID device_id_list[5]; - UINT32 device_id_list_size = ARRAY_SIZE(device_id_list); - - memset(&g_api, 0, sizeof(g_api)); - g_api.privilege = WIMAX_API_PRIVILEGE_READ_WRITE; - - result = -EIO; - r = WiMaxAPIOpen(&g_api); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&g_api, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: WiMaxAPIOpen failed with %d (%s)", r, errstr); - goto error_wimaxapiopen; - } - - r = SubscribeDeviceInsertRemove(&g_api, iwmx_sdk_addremove_cb); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&g_api, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: insert/remove subscribe failed with %d (%s)", r, errstr); - goto error_close; - } - - r = GetListDevice(&g_api, device_id_list, &device_id_list_size); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&g_api, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: Cannot obtain list of devices: %d (%s)", r, errstr); - goto error_close; - } - if (device_id_list_size < g_api.deviceIndex) { - nm_log_err(LOGD_WIMAX, "wmxsdk: changed device (%u) not in the list? (%u items)", - g_api.deviceIndex, device_id_list_size); - } - - if (device_id_list_size == 0) { - nm_log_dbg(LOGD_WIMAX, "No WiMAX devices reported"); - } else { - for (cnt = 0; cnt < device_id_list_size; cnt++) { - WIMAX_API_HW_DEVICE_ID *dev = device_id_list + cnt; - nm_log_dbg(LOGD_WIMAX, "#%u index #%u device %s", cnt, dev->deviceIndex, dev->deviceName); - iwmx_sdk_dev_add(cnt, dev->deviceIndex, dev->deviceName); - } - } - return 0; - -error_close: - WiMaxAPIClose(&g_api); -error_wimaxapiopen: - return result; -} - -void iwmx_sdk_api_exit(void) -{ - WIMAX_API_RET r; - - char errstr[512]; - UINT32 errstr_size = sizeof(errstr); - - r = WiMaxAPIClose(&g_api); - if (r != WIMAX_API_RET_SUCCESS) { - GetErrorString(&g_api, r, errstr, &errstr_size); - nm_log_err(LOGD_WIMAX, "wmxsdk: WiMaxAPIClose failed with %d (%s)", r, errstr); - } - return; -} |