diff options
Diffstat (limited to 'src/settings/plugins/ifnet/tests')
| -rw-r--r-- | src/settings/plugins/ifnet/tests/Makefile.am | 18 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/Makefile.in | 716 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/hostname | 2 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/net | 147 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/net.all | 864 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/nm-system-settings.conf | 5 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/test_all.c | 399 | ||||
| -rw-r--r-- | src/settings/plugins/ifnet/tests/wpa_supplicant.conf | 864 |
8 files changed, 0 insertions, 3015 deletions
diff --git a/src/settings/plugins/ifnet/tests/Makefile.am b/src/settings/plugins/ifnet/tests/Makefile.am deleted file mode 100644 index 20a26805..00000000 --- a/src/settings/plugins/ifnet/tests/Makefile.am +++ /dev/null @@ -1,18 +0,0 @@ -INCLUDES=-I$(srcdir)/../ \ - -I$(top_srcdir)/libnm-glib \ - -I$(top_srcdir)/libnm-util \ - -I$(top_srcdir)/include \ - -I$(top_srcdir)/src/settings -TESTS = check_ifnet -check_PROGRAMS = check_ifnet -check_ifnet_SOURCES = test_all.c -check_ifnet_CPPFLAGS = $(CHECK_CFLAGS) $(GLIB_CFLAGS) -check_ifnet_LDADD = $(top_builddir)/libnm-util/libnm-util.la \ - $(builddir)/../lib-ifnet-io.la \ - $(CHECK_LIBS) \ - $(GLIB_LIBS) -EXTRA_DIST = hostname \ - net \ - net.all \ - nm-system-settings.conf \ - wpa_supplicant.conf diff --git a/src/settings/plugins/ifnet/tests/Makefile.in b/src/settings/plugins/ifnet/tests/Makefile.in deleted file mode 100644 index adb1816c..00000000 --- a/src/settings/plugins/ifnet/tests/Makefile.in +++ /dev/null @@ -1,716 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -TESTS = check_ifnet$(EXEEXT) -check_PROGRAMS = check_ifnet$(EXEEXT) -subdir = src/settings/plugins/ifnet/tests -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/compiler_warnings.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-doc.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/introspection.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libnl-check.m4 \ - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am_check_ifnet_OBJECTS = check_ifnet-test_all.$(OBJEXT) -check_ifnet_OBJECTS = $(am_check_ifnet_OBJECTS) -am__DEPENDENCIES_1 = -check_ifnet_DEPENDENCIES = $(top_builddir)/libnm-util/libnm-util.la \ - $(builddir)/../lib-ifnet-io.la $(am__DEPENDENCIES_1) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(check_ifnet_SOURCES) -DIST_SOURCES = $(check_ifnet_SOURCES) -ETAGS = etags -CTAGS = ctags -am__tty_colors = \ -red=; grn=; lgn=; blu=; std= -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SYS_DIR = @DBUS_SYS_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DHCLIENT_PATH = @DHCLIENT_PATH@ -DHCLIENT_VERSION = @DHCLIENT_VERSION@ -DHCPCD_PATH = @DHCPCD_PATH@ -DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GIO_CFLAGS = @GIO_CFLAGS@ -GIO_LIBS = @GIO_LIBS@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMODULE_CFLAGS = @GMODULE_CFLAGS@ -GMODULE_LIBS = @GMODULE_LIBS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ -GNUTLS_LIBS = @GNUTLS_LIBS@ -GREP = @GREP@ -GTKDOC_CHECK = @GTKDOC_CHECK@ -GTKDOC_MKPDF = @GTKDOC_MKPDF@ -GTKDOC_REBASE = @GTKDOC_REBASE@ -GUDEV_CFLAGS = @GUDEV_CFLAGS@ -GUDEV_LIBS = @GUDEV_LIBS@ -HTML_DIR = @HTML_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ -INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ -INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ -INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ -INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ -INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ -INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ -INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ -IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ -KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBM = @LIBM@ -LIBNL_CFLAGS = @LIBNL_CFLAGS@ -LIBNL_LIBS = @LIBNL_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ -NM_MICRO_VERSION = @NM_MICRO_VERSION@ -NM_MINOR_VERSION = @NM_MINOR_VERSION@ -NM_VERSION = @NM_VERSION@ -NSS_CFLAGS = @NSS_CFLAGS@ -NSS_LIBS = @NSS_LIBS@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKGCONFIG_PATH = @PKGCONFIG_PATH@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POLKIT_CFLAGS = @POLKIT_CFLAGS@ -POLKIT_LIBS = @POLKIT_LIBS@ -POSUB = @POSUB@ -PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -RANLIB = @RANLIB@ -RESOLVCONF_PATH = @RESOLVCONF_PATH@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ -UDEV_BASE_DIR = @UDEV_BASE_DIR@ -USE_NLS = @USE_NLS@ -UUID_CFLAGS = @UUID_CFLAGS@ -UUID_LIBS = @UUID_LIBS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -systemdsystemunitdir = @systemdsystemunitdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -INCLUDES = -I$(srcdir)/../ \ - -I$(top_srcdir)/libnm-glib \ - -I$(top_srcdir)/libnm-util \ - -I$(top_srcdir)/include \ - -I$(top_srcdir)/src/settings - -check_ifnet_SOURCES = test_all.c -check_ifnet_CPPFLAGS = $(CHECK_CFLAGS) $(GLIB_CFLAGS) -check_ifnet_LDADD = $(top_builddir)/libnm-util/libnm-util.la \ - $(builddir)/../lib-ifnet-io.la \ - $(CHECK_LIBS) \ - $(GLIB_LIBS) - -EXTRA_DIST = hostname \ - net \ - net.all \ - nm-system-settings.conf \ - wpa_supplicant.conf - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/settings/plugins/ifnet/tests/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/settings/plugins/ifnet/tests/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -check_ifnet$(EXEEXT): $(check_ifnet_OBJECTS) $(check_ifnet_DEPENDENCIES) - @rm -f check_ifnet$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(check_ifnet_OBJECTS) $(check_ifnet_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/check_ifnet-test_all.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -check_ifnet-test_all.o: test_all.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(check_ifnet_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT check_ifnet-test_all.o -MD -MP -MF $(DEPDIR)/check_ifnet-test_all.Tpo -c -o check_ifnet-test_all.o `test -f 'test_all.c' || echo '$(srcdir)/'`test_all.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/check_ifnet-test_all.Tpo $(DEPDIR)/check_ifnet-test_all.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test_all.c' object='check_ifnet-test_all.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(check_ifnet_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o check_ifnet-test_all.o `test -f 'test_all.c' || echo '$(srcdir)/'`test_all.c - -check_ifnet-test_all.obj: test_all.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(check_ifnet_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT check_ifnet-test_all.obj -MD -MP -MF $(DEPDIR)/check_ifnet-test_all.Tpo -c -o check_ifnet-test_all.obj `if test -f 'test_all.c'; then $(CYGPATH_W) 'test_all.c'; else $(CYGPATH_W) '$(srcdir)/test_all.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/check_ifnet-test_all.Tpo $(DEPDIR)/check_ifnet-test_all.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='test_all.c' object='check_ifnet-test_all.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(check_ifnet_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o check_ifnet-test_all.obj `if test -f 'test_all.c'; then $(CYGPATH_W) 'test_all.c'; else $(CYGPATH_W) '$(srcdir)/test_all.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - $(am__tty_colors); \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - col=$$red; res=XPASS; \ - ;; \ - *) \ - col=$$grn; res=PASS; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xfail=`expr $$xfail + 1`; \ - col=$$lgn; res=XFAIL; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - col=$$red; res=FAIL; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - col=$$blu; res=SKIP; \ - fi; \ - echo "$${col}$$res$${std}: $$tst"; \ - done; \ - if test "$$all" -eq 1; then \ - tests="test"; \ - All=""; \ - else \ - tests="tests"; \ - All="All "; \ - fi; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="$$All$$all $$tests passed"; \ - else \ - if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ - banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all $$tests failed"; \ - else \ - if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ - banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - if test "$$skip" -eq 1; then \ - skipped="($$skip test was not run)"; \ - else \ - skipped="($$skip tests were not run)"; \ - fi; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - if test "$$failed" -eq 0; then \ - echo "$$grn$$dashes"; \ - else \ - echo "$$red$$dashes"; \ - fi; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes$$std"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: check-am install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ - clean-checkPROGRAMS clean-generic clean-libtool ctags \ - distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/settings/plugins/ifnet/tests/hostname b/src/settings/plugins/ifnet/tests/hostname deleted file mode 100644 index 25c76165..00000000 --- a/src/settings/plugins/ifnet/tests/hostname +++ /dev/null @@ -1,2 +0,0 @@ -#Generated by NetworkManager -hostname="gentoo" diff --git a/src/settings/plugins/ifnet/tests/net b/src/settings/plugins/ifnet/tests/net deleted file mode 100644 index e7550002..00000000 --- a/src/settings/plugins/ifnet/tests/net +++ /dev/null @@ -1,147 +0,0 @@ -# This blank configuration will automatically use DHCP for any net.* -# scripts in /etc/init.d. To create a more complete configuration, -# please review /etc/conf.d/net.example and save your configuration -# in /etc/conf.d/net (this file :]!). - -config_eth0=( -"202.117.16.121 netmask 255.255.255.0 brd 202.117.16.255" -"192.168.4.121/24" -"dhcp6" -) -routes_eth0=( "default via 202.117.16.1" - "192.168.4.0/24 via 192.168.4.1") -dns_servers_eth0="202.117.0.20 202.117.0.21" -dns_search_eth0="p12.edu.cn p13.edu.cn" - -config_eth1=( - "dhcp" -) -enable_ipv6_eth1="true" -routes_eth1=( "default via 202.117.16.1" ) -dns_servers_eth1="202.117.0.20 202.117.0.21" -config_eth2=( -"202.117.16.1211 netmask 255.255.255.0 brd 202.117.16.255" -"192.168.4.121/24" -"4321:0:1:2:3:4:567:89ab/64" -) -routes_eth2=("default via 4321:0:1:2:3:4:567:89ab") -enable_ipv6_eth2="true" -config_eth3=("nufjlsjlll") -managed_eth4=("false") -routes_eth4=("default via 4321:0:1:2:3:4:567:89ab") -config_eth5=("dhcp") -config_eth6=("192.168.4.{1..101}/24") - -config_eth7=( "dhcp" ) -auto_eth7="true" - - -config_myxjtu2=("202.117.16.121/24 brd 202.117.16.255") -routes_myxjtu2=("default via 202.117.16.1") -dns_servers_myxjtu2="202.117.0.20 202.117.0.21" -#key_myxjtu2="[1] s:xjtud key [1] enc restricted" -#key_eth6="[1] aaaa-4444-3d [2] s:xjtudlc key [1] enc open" - - -username_ppp0='user' -password_ppp0='password' - -config_qiaomuf=("dhcp") - -config_1xtest=("dhcp") - -config_0xab3ace=("dhcp") - -modules=( "iproute2" ) - config_kvm0=( "null" ) - config_kvm1=( "null" ) - - tuntap_kvm0="tap" - tuntap_kvm1="tap" - tunctl_kvm0="-u user" - tunctl_kvm1="-u user" - -bridge_br0="eth0 kvm0 kvm1" -config_br0=( "192.168.1.10/24" ) - brctl_br0=( "setfd 0") - dhcp_eth1="nosendhost nontp -I" - -predown() { - # The default in the script is to test for NFS root and disallow - # downing interfaces in that case. Note that if you specify a - # predown() function you will override that logic. Here it is, in - # case you still want it... - if is_net_fs /; then - eerror "root filesystem is network mounted -- can't stop ${IFACE}" - return 1 - fi - - # Remember to return 0 on success - return 0 -} - -postup() { - # This function could be used, for example, to register with a - # dynamic DNS service. Another possibility would be to - # send/receive mail once the interface is brought up. - - # Here is an example that allows the use of iproute rules - # which have been configured using the rules_eth0 variable. - #rules_eth0=" \ - # 'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \ - # 'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \ - #" - eval set -- \$rules_${IFVAR} - if [ $# != 0 ]; then - einfo "Adding IP policy routing rules" - eindent - # Ensure that the kernel supports policy routing - if ! ip rule list | grep -q "^"; then - eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)" - eerror "in your kernel to use ip rules" - else - for x; do - ebegin "${x}" - ip rule add ${x} - eend $? - done - fi - eoutdent - # Flush the cache - ip route flush cache dev "${IFACE}" - fi - -} - -postdown() { - # Enable Wake-On-LAN for every interface except for lo - # Probably a good idea to set ifdown="no" in /etc/conf.d/net - # as well ;) - [ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g - - Automatically erase any ip rules created in the example postup above - if interface_exists "${IFACE}"; then - # Remove any rules for this interface - local rule - ip rule list | grep " iif ${IFACE}[ ]*" | { - while read rule; do - rule="${rule#*:}" - ip rule del ${rule} - done - } - # Flush the route cache - ip route flush cache dev "${IFACE}" - fi - - # Return 0 always - return 0 -} - -failup() { - # This function is mostly here for completeness... I haven't - # thought of anything nifty to do with it yet ;-) -} - -faildown() -{} - diff --git a/src/settings/plugins/ifnet/tests/net.all b/src/settings/plugins/ifnet/tests/net.all deleted file mode 100644 index a30a1b95..00000000 --- a/src/settings/plugins/ifnet/tests/net.all +++ /dev/null @@ -1,864 +0,0 @@ -############################################################################## -# QUICK-START -# -# The quickest start is if you want to use DHCP. -# In that case, everything should work out of the box, no configuration -# necessary, though the startup script will warn you that you haven't -# specified anything. - -# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6 -# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have -# the relevant kernel option enabled. So if you don't have an IPv6 enabled -# kernel then remove the IPv6 address from your config. - -# If you want to use a static address or use DHCP explicitly, jump -# down to the section labelled INTERFACE HANDLERS. -# -# If you want to do anything more fancy, you should take the time to -# read through the rest of this file. - -############################################################################## -# MODULES -# -# We now support modular networking scripts which means we can easily -# add support for new interface types and modules while keeping -# compatability with existing ones. -# -# Modules load by default if the package they need is installed. If -# you specify a module here that doesn't have it's package installed -# then you get an error stating which package you need to install. -# Ideally, you only use the modules setting when you have two or more -# packages installed that supply the same service. -# -# In other words, you probably should DO NOTHING HERE... - -# Prefer ifconfig over iproute2 -modules=( "ifconfig" ) - -# You can also specify other modules for an interface -# In this case we prefer udhcpc over dhcpcd -modules_eth0=( "udhcpc" ) - -# You can also specify which modules not to use - for example you may be -# using a supplicant or linux-wlan-ng to control wireless configuration but -# you still want to configure network settings per ESSID associated with. -modules=( "!iwconfig" "!wpa_supplicant" ) -# IMPORTANT: If you need the above, please disable modules in that order - - -############################################################################## -# INTERFACE HANDLERS -# -# We provide two interface handlers presently: ifconfig and iproute2. -# You need one of these to do any kind of network configuration. -# For ifconfig support, emerge sys-apps/net-tools -# For iproute2 support, emerge sys-apps/iproute2 - -# If you don't specify an interface then we prefer iproute2 if it's installed -# To prefer ifconfig over iproute2 -modules=( "ifconfig" ) - -# For a static configuration, use something like this -# (They all do exactly the same thing btw) -config_eth0=( "192.168.0.2/24" ) -config_eth0=( "192.168.0.2 netmask 255.255.255.0" ) - -# We can also specify a broadcast -config_eth0=( "192.168.0.2/24 brd 192.168.0.255" ) -config_eth0=( "192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" ) - -# If you need more than one address, you can use something like this -# NOTE: ifconfig creates an aliased device for each extra IPv4 address -# (eth0:1, eth0:2, etc) -# iproute2 does not do this as there is no need to -config_eth0=( - "192.168.0.2/24" - "192.168.0.3/24" - "192.168.0.4/24" -) -# Or you can use sequence expressions -config_eth0=( "192.168.0.{2..4}/24" ) -# which does the same as above. Be careful though as if you use this and -# fallbacks, you have to ensure that both end up with the same number of -# values otherwise your fallback won't work correctly. - -# You can also use IPv6 addresses -# (you should always specify a prefix length with IPv6 here) -config_eth0=( - "192.168.0.2/24" - "4321:0:1:2:3:4:567:89ab/64" - "4321:0:1:2:3:4:567:89ac/64" -) - -# If you wish to keep existing addresses + routing and the interface is up, -# you can specify a noop (no operation). If the interface is down or there -# are no addresses assigned, then we move onto the next step (default dhcp) -# This is useful when configuring your interface with a kernel command line -# or similar -config_eth0=( "noop" "192.168.0.2/24" ) - -# If you don't want ANY address (only useful when calling for advanced stuff) -config_eth0=( "null" ) - -# Here's how to do routing if you need it -routes_eth0=( - "default via 192.168.0.1" # IPv4 default route - "10.0.0.0/8 via 192.168.0.1" # IPv4 subnet route - "::/0" # IPv6 unicast -) - -# If a specified module fails (like dhcp - see below), you can specify a -# fallback like so -fallback_eth0=( "192.168.0.2 netmask 255.255.255.0" ) -fallback_route_eth0=( "default via 192.168.0.1" ) - -# NOTE: fallback entry must match the entry location in config_eth0 -# As such you can only have one fallback route. - -# Some users may need to alter the MTU - here's how -mtu_eth0="1500" - -# Each module described below can set a default base metric, lower is -# preferred over higher. This is so we can prefer a wired route over a -# wireless route automaticaly. You can override this by setting -metric_eth0="100" -# or on a global basis -metric="100" -# The only downside of the global setting is that you have to ensure that -# there are no conflicting routes yourself. For users with large routing -# tables you may have to set a global metric as the due to a simple read of -# the routing table taking over a minute at a time. - -############################################################################## -# OPTIONAL MODULES - -# INTERFACE RENAMING -# There is no consistent device renaming scheme for Linux. -# The preferred way of naming devices is via the kernel module directly or -# by using udev (http://www.reactivated.net/udevrules.php) - -# If you are unable to write udev rules, then we do provide a way of renaming -# the interface based on it's MAC address, but it is not optimal. -# Here is how to rename an interface whose MAC address is 00:11:22:33:44:55 -# to foo1 -rename_001122334455="foo1" - -# You can also do this based on current device name - although this is not -# recommended. Here we rename eth1 to foo2. -rename_eth1="foo2" - -#----------------------------------------------------------------------------- -# WIRELESS (802.11 support) -# Wireless can be provided by iwconfig or wpa_supplicant - -# iwconfig -# emerge net-wireless/wireless-tools -# Wireless options are held in /etc/conf.d/wireless - but could be here too -# Consult the sample file /etc/conf.d/wireless.example for instructions -# iwconfig is the default - -# wpa_supplicant -# emerge net-wireless/wpa-supplicant -# Wireless options are held in /etc/wpa_supplicant.conf -# Consult the sample file /etc/wpa_supplicant.conf.example for instructions -# To choose wpa_supplicant over iwconfig -modules=( "wpa_supplicant" ) -# To configure wpa_supplicant -wpa_supplicant_eth0="-Dwext" # For generic wireless -wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards -# Consult wpa_supplicant for more drivers -# By default don't wait for wpa_suppliant to associate and authenticate. -# If you would like to, so can specify how long in seconds -associate_timeout_eth0=60 -# A value of 0 means wait forever. - -# GENERIC WIRELESS OPTIONS -# PLEASE READ THE INSTRUCTIONS IN /etc/conf.d/wireless.example FOR -# HOW TO USE THIS ESSID VARIABLE -# You can also override any settings found here per ESSID - which is very -# handy if you use different networks a lot -config_ESSID=( "dhcp" ) -dhcpcd_ESSID="-t 5" - -# Setting name/domain server causes /etc/resolv.conf to be overwritten -# Note that if DHCP is used, and you want this to take precedence then - set dhcp_ESSID="nodns" -dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" ) -dns_domain_ESSID="some.domain" -dns_search_ESSID="search.this.domain search.that.domain" -# Please check the man page for resolv.conf for more information -# as domain and search are mutually exclusive. - -# You can also override any settings found here per MAC address of the AP -# in case you use Access Points with the same ESSID but need different -# networking configs. Below is an example - of course you use the same -# method with other variables -mac_config_001122334455=( "dhcp" ) -mac_dhcpcd_001122334455="-t 10" -mac_dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" ) - -# When an interface has been associated with an Access Point, a global -# variable called ESSID is set to the Access Point's ESSID for use in the -# pre/post user functions below (although it's not available in preup as you -# won't have associated then) - -# If you're using anything else to configure wireless on your interface AND -# you have installed any of the above packages, you need to disable them -modules=( "!iwconfig" "!wpa_supplicant" ) - -#----------------------------------------------------------------------------- -# DHCP -# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc. -# -# dhclient: emerge net-misc/dhcp -# dhcpcd: emerge net-misc/dhcpcd -# pump: emerge net-misc/pump -# udhcpc: emerge net-misc/udhcp - -# If you have more than one DHCP client installed, you need to specify which -# one to use - otherwise we default to dhcpcd if available. -modules=( "dhclient" ) # to select dhclient over dhcpcd -# -# Notes: -# - All clients send the current hostname to the DHCP server by default -# - dhcpcd does not daemonize when the lease time is infinite -# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers -# - pump does not support getting NIS servers -# - DHCP tends to erase any existing device information - so add -# static addresses after dhcp if you need them -# - dhclient and udhcpc can set other resolv.conf options such as "option" -# and "sortlist"- see the System module for more details - -# Regardless of which DHCP client you prefer, you configure them the -# same way using one of following depending on which interface modules -# you're using. -config_eth0=( "dhcp" ) - -# For passing custom options to dhcpcd use something like the following. This -# example reduces the timeout for retrieving an address from 60 seconds (the -# default) to 10 seconds. -dhcpcd_eth0="-t 10" - -# dhclient, udhcpc and pump don't have many runtime options -# You can pass options to them in a similar manner to dhcpcd though -dhclient_eth0="..." -udhcpc_eth0="..." -pump_eth0="..." - -# GENERIC DHCP OPTIONS -# Set generic DHCP options like so -dhcp_eth0="release nodns nontp nonis nogateway nosendhost" - -# This tells the dhcp client to release it's lease when it stops, not to -# overwrite dns, ntp and nis settings, not to set a default route and not to -# send the current hostname to the dhcp server and when it starts. -# You can use any combination of the above options - the default is not to -# use any of them. - -#----------------------------------------------------------------------------- -# For APIPA support, emerge net-misc/iputils or net-analyzer/arping - -# APIPA is a module that tries to find a free address in the range -# 169.254.0.0-169.254.255.255 by arping a random address in that range on the -# interface. If no reply is found then we assign that address to the interface - -# This is only useful for LANs where there is no DHCP server and you don't -# connect directly to the internet. -config_eth0=( "dhcp" ) -fallback_eth0=( "apipa" ) - -#----------------------------------------------------------------------------- -# ARPING Gateway configuration -# and -# Automatic Private IP Addressing (APIPA) -# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping -# -# This is a module that tries to find a gateway IP. If it exists then we use -# that gateways configuration for our own. For the configuration variables -# simply ensure that each octet is zero padded and the dots are removed. -# Below is an example. -# -gateways_eth0="192.168.0.1 10.0.0.1" -config_192168000001=( "192.168.0.2/24" ) -routes_192168000001=( "default via 192.168.0.1" ) -dns_servers_192168000001=( "192.168.0.1" ) -config_010000000001=( "10.0.0.254/8" ) -routes_010000000001=( "default via 10.0.0.1" ) -dns_servers_010000000001=( "10.0.0.1" ) - -# We can also specify a specific MAC address for each gateway if different -# networks have the same gateway. -gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF" -config_192168000001_001122AABBCC=( "192.168.0.2/24" ) -routes_192168000001_001122AABBCC=( "default via 192.168.0.1" ) -dns_servers_192168000001_001122AABBCC=( "192.168.0.1" ) -config_010000000001_334455DDEEFF=( "10.0.0.254/8" ) -routes_010000000001_334455DDEEFF=( "default via 10.0.0.1" ) -dns_servers_010000000001_334455DDEEFF=( "10.0.0.1" ) - -# If we don't find any gateways (or there are none configured) then we try and -# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255 -# by arping a random address in that range on the interface. If no reply is -# found then we assign that address to the interface. - -# This is only useful for LANs where there is no DHCP server. -config_eth0=( "arping" ) - -# or if no DHCP server can be found -config_eth0=( "dhcp" ) -fallback_eth0=( "arping" ) - -# NOTE: We default to sleeping for 1 second the first time we attempt an -# arping to give the interface time to settle on the LAN. This appears to -# be a good default for most instances, but if not you can alter it here. -arping_sleep=5 -arping_sleep_lan=7 - -# NOTE: We default to waiting 3 seconds to get an arping response. You can -# change the default wait like so. -arping_wait=3 -arping_wait_lan=2 - -#----------------------------------------------------------------------------- -# VLAN (802.1q support) -# For VLAN support, emerge net-misc/vconfig - -# Specify the VLAN numbers for the interface like so -# Please ensure your VLAN IDs are NOT zero-padded -vlans_eth0="1 2" - -# You may not want to assign an IP the the physical interface, but we still -# need it up. -config_eth0=( "null" ) - -# You can also configure the VLAN - see for vconfig man page for more details -vconfig_eth0=( "set_name_type VLAN_PLUS_VID_NO_PAD" ) -vconfig_vlan1=( "set_flag 1" "set_egress_map 2 6" ) -config_vlan1=( "172.16.3.1 netmask 255.255.254.0" ) -config_vlan2=( "172.16.2.1 netmask 255.255.254.0" ) - -# NOTE: Vlans can be configured with a . in their interface names -# When configuring vlans with this name type, you need to replace . with a _ -config_eth0.1=( "dhcp" ) - does not work -config_eth0_1=( "dhcp" ) - does work - -# NOTE: Vlans are controlled by their physical interface and not per vlan -# This means you do not need to create init scripts in /etc/init.d for each -# vlan, you must need to create one for the physical interface. -# If you wish to control the configuration of each vlan through a separate -# script, or wish to rename the vlan interface to something that vconfig -# cannot then you need to do this. -vlan_start_eth0="no" - -# If you do the above then you may want to depend on eth0 like so - RC_NEED_vlan1="net.eth0" -# NOTE: depend functions only work in /etc/conf.d/net -# and not in profile configs such as /etc/conf.d/net.foo - -#----------------------------------------------------------------------------- -# Bonding -# For link bonding/trunking emerge net-misc/ifenslave - -# To bond interfaces together -slaves_bond0="eth0 eth1 eth2" -config_bond0=( "null" ) # You may not want to assign an IP the the bond - -# If any of the slaves require extra configuration - for example wireless or -# ppp devices - we need to depend function on the bonded interfaces -RC_NEED_bond0="net.eth0 net.eth1" - - -#----------------------------------------------------------------------------- -# Classical IP over ATM -# For CLIP support emerge net-dialup/linux-atm - -# Ensure that you have /etc/atmsigd.conf setup correctly -# Now setup each clip interface like so -clip_atm0=( "peer_ip [if.]vpi.vci [opts]" ... ) -# where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection -# with your ISP, your only peer is usually the ISP gateway closest to you), -# "if" is the number of the ATM interface which will carry the PVC, "vpi.vci" -# is the ATM VC address, and "opts" may optionally specify VC parameters like -# qos, pcr, and the like (see "atmarp -s" for further reference). Please also -# note quoting: it is meant to distinguish the VCs you want to create. You may, -# in example, create an atm0 interface to more peers, like this: -clip_atm0=( "1.1.1.254 0.8.35" "1.1.1.253 1.8.35" ) - -# By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a -# null encapsulation (aka "VC mode"), please add the keyword "null" to opts. - - -#----------------------------------------------------------------------------- -# PPP -# For PPP support, emerge net-dialup/ppp -# PPP is used for most dialup connections, including ADSL. -# The older ADSL module is documented below, but you are encouraged to try -# this module first. -# -# You need to create the PPP net script yourself. Make it like so -#ln -s net.lo /etc/init.d/net.ppp0 -# -# We have to instruct ppp0 to actually use ppp -config_ppp0=( "ppp" ) -# -# Each PPP interface requires an interface to use as a "Link" -link_ppp0="/dev/ttyS0" # Most PPP links will use a serial port -link_ppp0="eth0" # PPPoE requires an ethernet interface -link_ppp0="[itf.]vpi.vci" # PPPoA requires the ATM VC's address -link_ppp0="/dev/null" # ISDN links should have this -link_ppp0="pty 'your_link_command'" # PPP links over ssh, rsh, etc -# -# Here you should specify what pppd plugins you want to use -# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius, -# radattr, radrealms and winbind -plugins_ppp0=( - "pppoe" # Required plugin for PPPoE - "pppoa vc-encaps" # Required plugin for PPPoA with an option - "capi" # Required plugin for ISDN -) -# -# PPP requires at least a username. You can optionally set a password here too -# If you don't, then it will use the password specified in /etc/ppp/*-secrets -# against the specified username -username_ppp0='user' -password_ppp0='password' -# NOTE: You can set a blank password like so -password_ppp0= -# -# The PPP daemon has many options you can specify - although there are many -# and may seem daunting, it is recommended that you read the pppd man page -# before enabling any of them -pppd_ppp0=( - "maxfail 0" # WARNING: It's not recommended you use this - # if you don't specify maxfail then we assume 0 - "updetach" # If not set, "/etc/init.d/net.ppp0 start" will return - # immediately, without waiting the link to come up - # for the first time. - # Do not use it for dial-on-demand links! - "debug" # Enables syslog debugging - "noauth" # Do not require the peer to authenticate itself - "defaultroute" # Make this PPP interface the default route - "usepeerdns" # Use the DNS settings provided by PPP - -# On demand options - "demand" # Enable dial on demand - "idle 30" # Link goes down after 30 seconds of inactivity - "10.112.112.112:10.112.112.113" # Phony IP addresses - "ipcp-accept-remote" # Accept the peers idea of remote address - "ipcp-accept-local" # Accept the peers idea of local address - "holdoff 3" # Wait 3 seconds after link dies before re-starting - -# Dead peer detection - "lcp-echo-interval 15" # Send a LCP echo every 15 seconds - "lcp-echo-failure 3" # Make peer dead after 3 consective - # echo-requests - -# Compression options - use these to completely disable compression -# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp - -# Dial-up settings - "lock" # Lock serial port - "115200" # Set the serial port baud rate - "modem crtscts" # Enable hardware flow control - "192.168.0.1:192.168.0.2" # Local and remote IP addresses -) -# -# Dial-up PPP users need to specify at least one telephone number -phone_number_ppp0=( "12345689" ) # Maximum 2 phone numbers are supported -# They will also need a chat script - here's a good one -chat_ppp0=( -# 'ABORT' 'BUSY' -# 'ABORT' 'ERROR' -# 'ABORT' 'NO ANSWER' -# 'ABORT' 'NO CARRIER' -# 'ABORT' 'NO DIALTONE' -# 'ABORT' 'Invalid Login' -# 'ABORT' 'Login incorrect' -# 'TIMEOUT' '5' -# '' 'ATZ' -# 'OK' 'AT' # Put your modem initialization string here -# 'OK' 'ATDT\T' -# 'TIMEOUT' '60' -# 'CONNECT' '' -# 'TIMEOUT' '5' -# '~--' '' -) - -# If the link require extra configuration - for example wireless or -# RFC 268 bridge - we need to depend on the bridge so they get -# configured correctly. -RC_NEED_ppp0="net.nas0" - -#WARNING: if MTU of the PPP interface is less than 1500 and you use this -#machine as a router, you should add the following rule to your firewall -# -#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu - -#----------------------------------------------------------------------------- -# ADSL -# For ADSL support, emerge net-dialup/rp-pppoe -# WARNING: This ADSL module is being deprecated in favour of the PPP module -# above. -# You should make the following settings and also put your -# username/password information in /etc/ppp/pap-secrets - -# Configure the interface to use ADSL -config_eth0=( "adsl" ) - -# You probably won't need to edit /etc/ppp/pppoe.conf if you set this -adsl_user_eth0="my-adsl-username" - -#----------------------------------------------------------------------------- -# ISDN -# For ISDN support, emerge net-dialup/isdn4k-utils -# You should make the following settings and also put your -# username/password information in /etc/ppp/pap-secrets - -# Configure the interface to use ISDN -config_ippp0=( "dhcp" ) -# It's important to specify dhcp if you need it! -config_ippp0=( "192.168.0.1/24" ) -# Otherwise, you can use a static IP - -# NOTE: The interface name must be either ippp or isdn followed by a number - -# You may need this option to set the default route -ipppd_eth0="defaultroute" - -#----------------------------------------------------------------------------- -# MAC changer -# To set a specific MAC address -mac_eth0="00:11:22:33:44:55" - -# For changing MAC addresses using the below, emerge net-analyzer/macchanger -# - to randomize the last 3 bytes only -mac_eth0="random-ending" -# - to randomize between the same physical type of connection (e.g. fibre, -# copper, wireless) , all vendors -mac_eth0="random-samekind" -# - to randomize between any physical type of connection (e.g. fibre, copper, -# wireless) , all vendors -mac_eth0="random-anykind" -# - full randomization - WARNING: some MAC addresses generated by this may NOT -# act as expected -mac_eth0="random-full" -# custom - passes all parameters directly to net-analyzer/macchanger -mac_eth0="some custom set of parameters" - -# You can also set other options based on the MAC address of your network card -# Handy if you use different docking stations with laptops -config_001122334455=( "dhcp" ) - -#----------------------------------------------------------------------------- -# TUN/TAP -# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities -# -# You must specify if we're a tun or tap device. Then you can give it any -# name you like - such as vpn -tuntap_vpn="tun" -config_vpn=( "192.168.0.1/24") - -# Or stick wit the generic names - like tap0 -tuntap_tap0="tap" -config_tap0=( "192.168.0.1/24") - -# For passing custom options to tunctl use something like the following. This -# example sets the owner to adm -tunctl_tun1="-u adm" -# When using openvpn, there are no options - -#----------------------------------------------------------------------------- -# Bridging (802.1d) -# For bridging support emerge net-misc/bridge-utils - -# To add ports to bridge br0 -bridge_br0="eth0 eth1" -# or dynamically add them when the interface comes up -bridge_add_eth0="br0" -bridge_add_eth1="br0" - -# You need to configure the ports to null values so dhcp does not get started -config_eth0=( "null" ) -config_eth1=( "null" ) - -# Finally give the bridge an address - dhcp or a static IP -config_br0=( "dhcp" ) # may not work when adding ports dynamically -config_br0=( "192.168.0.1/24" ) - -# If any of the ports require extra configuration - for example wireless or -# ppp devices - we need to depend on them like so. -RC_NEED_br0="net.eth0 net.eth1" - -# Below is an example of configuring the bridge -# Consult "man brctl" for more details -brctl_br0=( "setfd 0" "sethello 0" "stp off" ) - -#----------------------------------------------------------------------------- -# RFC 2684 Bridge Support -# For RFC 2684 bridge support emerge net-misc/br2684ctl - -# Interface names have to be of the form nas0, nas1, nas2, etc. -# You have to specify a VPI and VCI for the interface like so -br2684ctl_nas0="-a 0.38" # UK VPI and VCI - -# You may want to configure the encapsulation method as well by adding the -e -# option to the command above (may need to be before the -a command) -# -e 0 # LLC (default) -# -e 1 # VC mux - -# Then you can configure the interface as normal -config_nas0=( "192.168.0.1/24" ) - -#----------------------------------------------------------------------------- -# Tunnelling -# WARNING: For tunnelling it is highly recommended that you -# emerge sys-apps/iproute2 -# -# For GRE tunnels -iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255" - -# For IPIP tunnels -iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255" - -# To configure the interface -config_vpn0=( "192.168.0.2 pointopoint 192.168.1.2" ) # ifconfig style -config_vpn0=( "192.168.0.2 peer 192.168.1.1" ) # iproute2 style - -# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you -# have a non-private address configured on an interface. - link_6to4="eth0" # Interface to base it's addresses on - config_6to4=( "ip6to4" ) -# You may want to depend on eth0 like so -RC_NEED_6to4="net.eth0" -# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be -# any name and this also works for any configured interface. -# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called -# sit0 - otherwise use a different name like 6to4 in the example above. - - -#----------------------------------------------------------------------------- -# System -# For configuring system specifics such as domain, dns, ntp and nis servers -# It's rare that you would need todo this, but you can anyway. -# This is most benefit to wireless users who don't use DHCP so they can change -# their configs based on ESSID. See wireless.example for more details - -# To use dns settings such as these, dns_servers_eth0 must be set! -# If you omit the _eth0 suffix, then it applies to all interfaces unless -# overridden by the interface suffix. -dns_domain_eth0="your.domain" -dns_servers_eth0="192.168.0.2 192.168.0.3" -dns_search_eth0="this.domain that.domain" -dns_options_eth0=( "timeout 1" "rotate" ) -dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0" -# See the man page for resolv.conf for details about the options and sortlist -# directives - -ntp_servers_eth0="192.168.0.2 192.168.0.3" - -nis_domain_eth0="domain" -nis_servers_eth0="192.168.0.2 192.168.0.3" - -# NOTE: Setting any of these will stamp on the files in question. So if you -# don't specify dns_servers but you do specify dns_domain then no nameservers -# will be listed in /etc/resolv.conf even if there were any there to start -# with. -# If this is an issue for you then maybe you should look into a resolv.conf -# manager like resolvconf-gentoo to manage this file for you. All packages -# that baselayout supports use resolvconf-gentoo if installed. - -#----------------------------------------------------------------------------- -# Cable in/out detection -# Sometimes the cable is in, others it's out. Obviously you don't want to -# restart net.eth0 every time when you plug it in either. -# -# netplug is a package that detects this and requires no extra configuration -# on your part. -# emerge sys-apps/netplug -# or -# emerge sys-apps/ifplugd -# and you're done :) - -# By default we don't wait for netplug/ifplugd to configure the interface. -# If you would like it to wait so that other services now that network is up -# then you can specify a timeout here. -plug_timeout="10" -# A value of 0 means wait forever. - -# If you don't want to use netplug on a specific interface but you have it -# installed, you can disable it for that interface via the modules statement -modules_eth0=( "!netplug" ) -# You can do the same for ifplugd -# -# You can disable them both with the generic plug -modules_eth0=( "!plug" ) - -# To use specific ifplugd options, fex specifying wireless mode -ifplugd_eth0="--api-mode=wlan" -# man ifplugd for more options - -############################################################################## -# ADVANCED CONFIGURATION -# -# Four functions can be defined which will be called surrounding the -# start/stop operations. The functions are called with the interface -# name first so that one function can control multiple adapters. An extra two -# functions can be defined when an interface fails to start or stop. -# -# The return values for the preup and predown functions should be 0 -# (success) to indicate that configuration or deconfiguration of the -# interface can continue. If preup returns a non-zero value, then -# interface configuration will be aborted. If predown returns a -# non-zero value, then the interface will not be allowed to continue -# deconfiguration. -# -# The return values for the postup, postdown, failup and faildown functions are -# ignored since there's nothing to do if they indicate failure. -# -# ${IFACE} is set to the interface being brought up/down -# ${IFVAR} is ${IFACE} converted to variable name bash allows - -#preup() { -# # Test for link on the interface prior to bringing it up. This -# # only works on some network adapters and requires the mii-diag -# # package to be installed. -# if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then -# ewarn "No link on ${IFACE}, aborting configuration" -# return 1 -# fi -# -# # Test for link on the interface prior to bringing it up. This -# # only works on some network adapters and requires the ethtool -# # package to be installed. -# if ethtool "${IFACE}" | grep -q 'Link detected: no'; then -# ewarn "No link on ${IFACE}, aborting configuration" -# return 1 -# fi -# -# -# # Remember to return 0 on success -# return 0 -#} - -#predown() { -# # The default in the script is to test for NFS root and disallow -# # downing interfaces in that case. Note that if you specify a -# # predown() function you will override that logic. Here it is, in -# # case you still want it... -# if is_net_fs /; then -# eerror "root filesystem is network mounted -- can't stop ${IFACE}" -# return 1 -# fi -# -# # Remember to return 0 on success -# return 0 -#} - -#postup() { -# # This function could be used, for example, to register with a -# # dynamic DNS service. Another possibility would be to -# # send/receive mail once the interface is brought up. - -# # Here is an example that allows the use of iproute rules -# # which have been configured using the rules_eth0 variable. -# #rules_eth0=( -# # "from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100" -# # "from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100" -# #) -# local x="rules_${IFVAR}[@]" -# local -a rules=( "${!x}" ) -# if [[ -n ${rules} ]] ; then -# einfo "Adding IP policy routing rules" -# eindent -# # Ensure that the kernel supports policy routing -# if ! ip rule list | grep -q "^" ; then -# eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)" -# eerror "in your kernel to use ip rules" -# else -# for x in "${rules[@]}" ; do -# ebegin "${x}" -# ip rule add ${x} dev "${IFACE}" -# eend $? -# done -# fi -# eoutdent -# # Flush the cache -# ip route flush cache dev "${IFACE}" -# fi - -#} - -#postdown() { -# # Enable Wake-On-LAN for every interface except for lo -# # Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc -# # as well ;) -# [[ ${IFACE} != "lo" ]] && ethtool -s "${IFACE}" wol g - -# Automatically erase any ip rules created in the example postup above -# if interface_exists "${IFACE}" ; then -# # Remove any rules for this interface -# local rule -# ip rule list | grep " iif ${IFACE}[ ]*" | { -# while read rule ; do -# rule="${rule#*:}" -# ip rule del ${rule} -# done -# } -# # Flush the route cache -# ip route flush cache dev "${IFACE}" -# fi - -# # Return 0 always -# return 0 -#} - -#failup() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -#faildown() { -# # This function is mostly here for completeness... I haven't -# # thought of anything nifty to do with it yet ;-) -#} - -############################################################################## -# FORCING MODULES -# The Big Fat Warning :- If you use module forcing do not complain to us or -# file bugs about it not working! -# -# Loading modules is a slow affair - we have to check each one for the following -# 1) Code sanity -# 2) Has the required package been emerged? -# 3) Has it modified anything? -# 4) Have all the dependant modules been loaded? - -# Then we have to strip out the conflicting modules based on user preference -# and default configuration and sort them into the correct order. -# Finally we check the end result for dependencies. - -# This, of course, takes valuable CPU time so we provide module forcing as a -# means to speed things up. We still do *some* checking but not much. - -# It is essential that you force modules in the correct order and supply all -# the modules you need. You must always supply an interface module - we -# supply ifconfig or iproute2. - -# The Big Fat Warning :- If you use module forcing do not complain to us or -# file bugs about it not working! - -# Now that we've warned you twice, here's how to do it -modules_force=( "ifconfig" ) -modules_force=( "iproute2" "dhcpcd" ) - -# We can also apply this to a specific interface -modules_force_eth1=( "iproute2" ) - -# The below will not work -modules_force=( "dhcpcd" ) -# No interface (ifconfig/iproute2) -modules_force=( "ifconfig" "essidnet" "iwconfig" ) -# Although it will not crash, essidnet will not work as it has to come after -# iwconfig -modules_force=( "iproute2" "ifconfig" ) -# The interface will be setup twice which will cause problems diff --git a/src/settings/plugins/ifnet/tests/nm-system-settings.conf b/src/settings/plugins/ifnet/tests/nm-system-settings.conf deleted file mode 100644 index 39bc87b8..00000000 --- a/src/settings/plugins/ifnet/tests/nm-system-settings.conf +++ /dev/null @@ -1,5 +0,0 @@ -[main] -plugins=ifnet,keyfile - -[ifnet] -managed=false diff --git a/src/settings/plugins/ifnet/tests/test_all.c b/src/settings/plugins/ifnet/tests/test_all.c deleted file mode 100644 index d114bbba..00000000 --- a/src/settings/plugins/ifnet/tests/test_all.c +++ /dev/null @@ -1,399 +0,0 @@ -/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */ -/* NetworkManager system settings service (ifnet) - * - * Mu Qiao <qiaomuf@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * Copyright (C) 1999-2010 Gentoo Foundation, Inc. - */ - -#include <stdio.h> -#include <string.h> -#include <glib.h> -#include <arpa/inet.h> -#include <stdlib.h> -#include <nm-utils.h> - -#include "net_parser.h" -#include "nm-test-helpers.h" -#include "net_utils.h" -#include "wpa_parser.h" -#include "connection_parser.h" - -static void -test_getdata () -{ - ASSERT (ifnet_get_data ("eth1", "config") - && strcmp (ifnet_get_data ("eth1", "config"), "dhcp") == 0, - "get data", "config_eth1 is not correct"); - ASSERT (ifnet_get_data ("ppp0", "username") - && strcmp (ifnet_get_data ("ppp0", "username"), "user") == 0, - "get data", "config_ppp0 username is not correctly read"); - ASSERT (ifnet_get_data ("ppp0", "password") - && strcmp (ifnet_get_data ("ppp0", "password"), - "password") == 0, "get data", - "config_ppp0 password is not correctly read"); -} - -static void -test_read_hostname () -{ - gchar *hostname = read_hostname ("hostname"); - - ASSERT (hostname != NULL, "get hostname", "hostname is NULL"); - ASSERT (strcmp ("gentoo", hostname) == 0, - "get hostname", - "hostname is not correctly read, read:%s, expected: gentoo", - hostname); - g_free (hostname); -} - -static void -test_write_hostname () -{ - gchar *hostname = read_hostname ("hostname"); - gchar *tmp; - - write_hostname ("gentoo-nm", "hostname"); - tmp = read_hostname ("hostname"); - ASSERT (strcmp (tmp, "gentoo-nm") == 0, - "write hostname", "write hostname error"); - write_hostname (hostname, "hostname"); - g_free (tmp); - g_free (hostname); -} - -static void -test_is_static () -{ - ASSERT (is_static_ip4 ("eth1") == FALSE, "is static", - "a dhcp interface is recognized as static"); - ASSERT (is_static_ip4 ("eth0") == TRUE, "is static", - "a static interface is recognized as dhcp"); - ASSERT (!is_static_ip6 ("eth0") == TRUE, "is static", - "a static interface is recognized as dhcp"); -} - -static void -test_has_default_route () -{ - ASSERT (has_default_ip4_route ("eth0"), - "has default route", "eth0 should have a default ipv4 route"); - ASSERT (has_default_ip6_route ("eth4"), - "has default route", "eth4 should have a default ipv6 route"); - ASSERT (!has_default_ip4_route ("eth5") - && !has_default_ip6_route ("eth5"), - "has default route", "eth5 shouldn't have a default route"); -} - -static void -test_has_ip6_address () -{ - ASSERT (has_ip6_address ("eth2"), "has ip6 address", - "eth2 should have a ipv6 address"); - ASSERT (!has_ip6_address ("eth0"), "has ip6 address", - "eth0 shouldn't have a ipv6 address") - -} - -static void -test_is_ip4_address () -{ - gchar *address1 = "192.168.4.232/24"; - gchar *address2 = "192.168.100.{1..254}/24"; - gchar *address3 = "192.168.4.2555/24"; - - ASSERT (is_ip4_address (address1), "is ip4 address", - "%s should be a valid address", address1); - ASSERT (is_ip4_address (address2), "is ip4 address", - "%s should be a valid address", address2); - ASSERT (!is_ip4_address (address3), "is ip4 address", - "%s should be an invalid address", address3); -} - -static void -test_is_ip6_address () -{ - gchar *address1 = "4321:0:1:2:3:4:567:89ac/24"; - - ASSERT (is_ip6_address (address1), "is ip6 address", - "%s should be a valid address", address1); -} - -static void -check_ip_block (ip_block * iblock, gchar * ip, gchar * netmask, gchar * gateway) -{ - char *str; - struct in_addr tmp_ip4_addr; - - str = malloc (INET_ADDRSTRLEN); - tmp_ip4_addr.s_addr = iblock->ip; - inet_ntop (AF_INET, &tmp_ip4_addr, str, INET_ADDRSTRLEN); - ASSERT (strcmp (ip, str) == 0, "check ip", - "ip expected:%s, find:%s", ip, str); - tmp_ip4_addr.s_addr = iblock->netmask; - inet_ntop (AF_INET, &tmp_ip4_addr, str, INET_ADDRSTRLEN); - ASSERT (strcmp (netmask, str) == 0, "check netmask", - "netmask expected:%s, find:%s", netmask, str); - tmp_ip4_addr.s_addr = iblock->gateway; - inet_ntop (AF_INET, &tmp_ip4_addr, str, INET_ADDRSTRLEN); - ASSERT (strcmp (gateway, str) == 0, "check gateway", - "gateway expected:%s, find:%s", gateway, str); - free (str); -} - -static void -test_convert_ipv4_config_block () -{ - ip_block *iblock = convert_ip4_config_block ("eth0"); - ip_block *tmp = iblock; - - ASSERT (iblock != NULL, "convert ipv4 block", - "block eth0 should not be NULL"); - check_ip_block (iblock, "202.117.16.121", "255.255.255.0", - "202.117.16.1"); - iblock = iblock->next; - destroy_ip_block (tmp); - ASSERT (iblock != NULL, "convert ipv4 block", - "block eth0 should have a second IP address"); - check_ip_block (iblock, "192.168.4.121", "255.255.255.0", - "202.117.16.1"); - destroy_ip_block (iblock); - iblock = convert_ip4_config_block ("eth2"); - ASSERT (iblock != NULL - && iblock->next == NULL, - "convert error IPv4 address", "should only get one address"); - check_ip_block (iblock, "192.168.4.121", "255.255.255.0", "0.0.0.0"); - destroy_ip_block (iblock); - iblock = convert_ip4_config_block ("eth3"); - ASSERT (iblock == NULL, "convert config_block", - "convert error configuration"); - destroy_ip_block (iblock); - iblock = convert_ip4_config_block ("eth6"); - ASSERT (iblock != NULL, "convert config_block", - "convert error configuration"); - destroy_ip_block (iblock); -} - -static void -test_convert_ipv4_routes_block () -{ - ip_block *iblock = convert_ip4_routes_block ("eth0"); - ip_block *tmp = iblock; - - ASSERT (iblock != NULL, "convert ip4 routes", "should get one route"); - check_ip_block (iblock, "192.168.4.0", "255.255.255.0", "192.168.4.1"); - iblock = iblock->next; - destroy_ip_block (tmp); - ASSERT (iblock == NULL, "convert ip4 routes", - "should only get one route"); -} - -static void -test_wpa_parser () -{ - const char *value; - - ASSERT (exist_ssid ("example"), "get wsec", - "ssid myxjtu2 is not found"); - ASSERT (exist_ssid ("static-wep-test"), "exist_ssid", - "ssid static-wep-test is not found"); - value = wpa_get_value ("static-wep-test", "key_mgmt"); - ASSERT (value - && strcmp (value, "NONE") == 0, "get wpa data", - "key_mgmt of static-wep-test should be NONE, find %s", value); - value = wpa_get_value ("static-wep-test", "wep_key0"); - ASSERT (value - && strcmp (value, "\"abcde\"") == 0, - "get wpa data", - "wep_key0 of static-wep-test should be abcde, find %s", value); - ASSERT (exist_ssid ("leap-example"), "get wsec", - "ssid leap-example is not found"); -} - -static void -test_strip_string () -{ - gchar *str = "( \"default via 202.117.16.1\" )"; - gchar *result = g_strdup (str); - gchar *result_b = result; - - result = strip_string (result, '('); - result = strip_string (result, ')'); - result = strip_string (result, '"'); - ASSERT (strcmp (result, "default via 202.117.16.1") == - 0, "strip_string", - "string isn't stripped, result is: %s", result); - g_free (result_b); -} - -static void -test_is_unmanaged () -{ - ASSERT (is_managed ("eth0"), "test_is_unmanaged", - "eth0 should be managed"); - ASSERT (!is_managed ("eth4"), "test_is_unmanaged", - "eth4 should be unmanaged"); -} - -static void -test_new_connection () -{ - GError **error = NULL; - NMConnection *connection; - - connection = ifnet_update_connection_from_config_block ("eth2", error); - ASSERT (connection != NULL, "new connection", - "new connection failed: %s", - error == NULL ? "None" : (*error)->message); - g_object_unref (connection); - connection = - ifnet_update_connection_from_config_block ("qiaomuf", error); - ASSERT (connection != NULL, "new connection", - "new connection failed: %s", error - && (*error) ? (*error)->message : "NONE"); - g_object_unref (connection); - connection = - ifnet_update_connection_from_config_block ("myxjtu2", error); - ASSERT (connection != NULL, "new connection", - "new connection failed: %s", error - && (*error) ? (*error)->message : "NONE"); - g_object_unref (connection); -} - -#define NET_GEN_NAME "net.generate" -#define SUP_GEN_NAME "wpa_supplicant.conf.generate" - -static void -test_update_connection () -{ - GError **error = NULL; - NMConnection *connection; - gboolean success; - - connection = ifnet_update_connection_from_config_block ("eth0", error); - ASSERT (connection != NULL, "get connection", - "get connection failed: %s", - error == NULL ? "None" : (*error)->message); - - success = ifnet_update_parsers_by_connection (connection, "eth0", - NET_GEN_NAME, - SUP_GEN_NAME, - NULL, - error); - ASSERT (success, "update connection", "update connection failed %s", "eth0"); - g_object_unref (connection); - - connection = ifnet_update_connection_from_config_block ("0xab3ace", error); - ASSERT (connection != NULL, "get connection", "get connection failed: %s", - error == NULL ? "None" : (*error)->message); - - success = ifnet_update_parsers_by_connection (connection, "0xab3ace", - NET_GEN_NAME, - SUP_GEN_NAME, - NULL, - error); - ASSERT (success, "update connection", "update connection failed %s", "0xab3ace"); - g_object_unref (connection); - - unlink (NET_GEN_NAME); - unlink (SUP_GEN_NAME); -} - -static void -test_add_connection () -{ - NMConnection *connection; - - connection = ifnet_update_connection_from_config_block ("eth0", NULL); - ASSERT (ifnet_add_new_connection (connection, NET_GEN_NAME, SUP_GEN_NAME, NULL), - "add connection", "add connection failed: %s", "eth0"); - g_object_unref (connection); - connection = ifnet_update_connection_from_config_block ("myxjtu2", NULL); - ASSERT (ifnet_add_new_connection (connection, NET_GEN_NAME, SUP_GEN_NAME, NULL), - "add connection", "add connection failed: %s", "myxjtu2"); - g_object_unref (connection); - - unlink (NET_GEN_NAME); - unlink (SUP_GEN_NAME); -} - -static void -test_delete_connection () -{ - GError *error = NULL; - NMConnection *connection; - - connection = ifnet_update_connection_from_config_block ("eth7", &error); - ASSERT (connection != NULL, "get connection", - "get connection failed: %s", - error ? error->message : "None"); - ASSERT (ifnet_delete_connection_in_parsers ("eth7", NET_GEN_NAME, SUP_GEN_NAME), - "delete connection", "delete connection failed: %s", "eth7"); - g_object_unref (connection); - connection = ifnet_update_connection_from_config_block ("qiaomuf", &error); - ASSERT (connection != NULL, "get connection", - "get connection failed: %s", - error ? error->message : "None"); - ASSERT (ifnet_delete_connection_in_parsers ("qiaomuf", NET_GEN_NAME, SUP_GEN_NAME), - "delete connection", "delete connection failed: %s", "qiaomuf"); - g_object_unref (connection); - - unlink (NET_GEN_NAME); - unlink (SUP_GEN_NAME); -} - -static void -run_all (gboolean run) -{ - if (run) { - test_strip_string (); - test_is_static (); - test_has_ip6_address (); - test_has_default_route (); - test_getdata (); - test_read_hostname (); - test_write_hostname (); - test_is_ip4_address (); - test_is_ip6_address (); - test_convert_ipv4_config_block (); - test_convert_ipv4_routes_block (); - test_is_unmanaged (); - test_wpa_parser (); - test_convert_ipv4_routes_block (); - test_new_connection (); - test_update_connection (); - test_add_connection (); - test_delete_connection (); - } -} - -int -main (void) -{ -// g_mem_set_vtable(glib_mem_profiler_table); -// g_atexit(g_mem_profile); - g_type_init (); - ifnet_destroy (); - wpa_parser_destroy (); - ifnet_init ("net"); - wpa_parser_init ("wpa_supplicant.conf"); - printf ("Initialization complete\n"); - run_all (TRUE); - ifnet_destroy (); - wpa_parser_destroy (); - return 0; -} diff --git a/src/settings/plugins/ifnet/tests/wpa_supplicant.conf b/src/settings/plugins/ifnet/tests/wpa_supplicant.conf deleted file mode 100644 index a2595d42..00000000 --- a/src/settings/plugins/ifnet/tests/wpa_supplicant.conf +++ /dev/null @@ -1,864 +0,0 @@ -##### Example wpa_supplicant configuration file ############################### -# -# This file describes configuration file format and lists all available option. -# Please also take a look at simpler configuration examples in 'examples' -# subdirectory. -# -# Empty lines and lines starting with # are ignored - -# NOTE! This file may contain password information and should probably be made -# readable only by root user on multiuser systems. - -# Note: All file paths in this configuration file should use full (absolute, -# not relative to working directory) path in order to allow working directory -# to be changed. This can happen if wpa_supplicant is run in the background. - -# Whether to allow wpa_supplicant to update (overwrite) configuration -# -# This option can be used to allow wpa_supplicant to overwrite configuration -# file whenever configuration is changed (e.g., new network block is added with -# wpa_cli or wpa_gui, or a password is changed). This is required for -# wpa_cli/wpa_gui to be able to store the configuration changes permanently. -# Please note that overwriting configuration file will remove the comments from -# it. -#update_config=1 - -# global configuration (shared by all network blocks) -# -# Parameters for the control interface. If this is specified, wpa_supplicant -# will open a control interface that is available for external programs to -# manage wpa_supplicant. The meaning of this string depends on which control -# interface mechanism is used. For all cases, the existance of this parameter -# in configuration is used to determine whether the control interface is -# enabled. -# -# For UNIX domain sockets (default on Linux and BSD): This is a directory that -# will be created for UNIX domain sockets for listening to requests from -# external programs (CLI/GUI, etc.) for status information and configuration. -# The socket file will be named based on the interface name, so multiple -# wpa_supplicant processes can be run at the same time if more than one -# interface is used. -# /var/run/wpa_supplicant is the recommended directory for sockets and by -# default, wpa_cli will use it when trying to connect with wpa_supplicant. -# -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run wpa_supplicant as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you -# want to allow non-root users to use the control interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. If this variable is commented out or -# not included in the configuration file, group will not be changed from the -# value it got by default when the directory or socket was created. -# -# When configuring both the directory and group, use following format: -# DIR=/var/run/wpa_supplicant GROUP=wheel -# DIR=/var/run/wpa_supplicant GROUP=0 -# (group can be either group name or gid) -# -# For UDP connections (default on Windows): The value will be ignored. This -# variable is just used to select that the control interface is to be created. -# The value can be set to, e.g., udp (ctrl_interface=udp) -# -# For Windows Named Pipe: This value can be used to set the security descriptor -# for controlling access to the control interface. Security descriptor can be -# set using Security Descriptor String Format (see http://msdn.microsoft.com/ -# library/default.asp?url=/library/en-us/secauthz/security/ -# security_descriptor_string_format.asp). The descriptor string needs to be -# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty -# DACL (which will reject all connections). See README-Windows.txt for more -# information about SDDL string format. -# -ctrl_interface=/var/run/wpa_supplicant - -# IEEE 802.1X/EAPOL version -# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines -# EAPOL version 2. However, there are many APs that do not handle the new -# version number correctly (they seem to drop the frames completely). In order -# to make wpa_supplicant interoperate with these APs, the version number is set -# to 1 by default. This configuration value can be used to set it to the new -# version (2). -eapol_version=1 - -# AP scanning/selection -# By default, wpa_supplicant requests driver to perform AP scanning and then -# uses the scan results to select a suitable AP. Another alternative is to -# allow the driver to take care of AP scanning and selection and use -# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association -# information from the driver. -# 1: wpa_supplicant initiates scanning and AP selection -# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association -# parameters (e.g., WPA IE generation); this mode can also be used with -# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with -# APs (i.e., external program needs to control association). This mode must -# also be used when using wired Ethernet drivers. -# 2: like 0, but associate with APs using security policy and SSID (but not -# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to -# enable operation with hidden SSIDs and optimized roaming; in this mode, -# the network blocks in the configuration file are tried one by one until -# the driver reports successful association; each network block should have -# explicit security policy (i.e., only one option in the lists) for -# key_mgmt, pairwise, group, proto variables -ap_scan=1 - -# EAP fast re-authentication -# By default, fast re-authentication is enabled for all EAP methods that -# support it. This variable can be used to disable fast re-authentication. -# Normally, there is no need to disable this. -fast_reauth=1 - -# OpenSSL Engine support -# These options can be used to load OpenSSL engines. -# The two engines that are supported currently are shown below: -# They are both from the opensc project (http://www.opensc.org/) -# By default no engines are loaded. -# make the opensc engine available -#opensc_engine_path=/usr/lib64/engine_opensc.so -# make the pkcs11 engine available -#pkcs11_engine_path=/usr/lib64/engine_pkcs11.so -# configure the path to the pkcs11 module required by the pkcs11 engine -#pkcs11_module_path=/usr/lib64/opensc-pkcs11.so - -# Dynamic EAP methods -# If EAP methods were built dynamically as shared object files, they need to be -# loaded here before being used in the network blocks. By default, EAP methods -# are included statically in the build, so these lines are not needed -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so - -# Driver interface parameters -# This field can be used to configure arbitrary driver interace parameters. The -# format is specific to the selected driver interface. This field is not used -# in most cases. -#driver_param="field=value" - -# Country code -# The ISO/IEC alpha2 country code for the country in which this device is -# currently operating. -#country=US - -# Maximum lifetime for PMKSA in seconds; default 43200 -#dot11RSNAConfigPMKLifetime=43200 -# Threshold for reauthentication (percentage of PMK lifetime); default 70 -#dot11RSNAConfigPMKReauthThreshold=70 -# Timeout for security association negotiation in seconds; default 60 -#dot11RSNAConfigSATimeout=60 - -# Wi-Fi Protected Setup (WPS) parameters - -# Universally Unique IDentifier (UUID; see RFC 4122) of the device -# If not configured, UUID will be generated based on the local MAC address. -#uuid=12345678-9abc-def0-1234-56789abcdef0 - -# Device Name -# User-friendly description of device; up to 32 octets encoded in UTF-8 -#device_name=Wireless Client - -# Manufacturer -# The manufacturer of the device (up to 64 ASCII characters) -#manufacturer=Company - -# Model Name -# Model of the device (up to 32 ASCII characters) -#model_name=cmodel - -# Model Number -# Additional device description (up to 32 ASCII characters) -#model_number=123 - -# Serial Number -# Serial number of the device (up to 32 characters) -#serial_number=12345 - -# Primary Device Type -# Used format: <categ>-<OUI>-<subcateg> -# categ = Category as an integer value -# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for -# default WPS OUI -# subcateg = OUI-specific Sub Category as an integer value -# Examples: -# 1-0050F204-1 (Computer / PC) -# 1-0050F204-2 (Computer / Server) -# 5-0050F204-1 (Storage / NAS) -# 6-0050F204-1 (Network Infrastructure / AP) -#device_type=1-0050F204-1 - -# OS Version -# 4-octet operating system version number (hex string) -#os_version=01020300 - -# Credential processing -# 0 = process received credentials internally (default) -# 1 = do not process received credentials; just pass them over ctrl_iface to -# external program(s) -# 2 = process received credentials internally and pass them over ctrl_iface -# to external program(s) -#wps_cred_processing=0 - -# network block -# -# Each network (usually AP's sharing the same SSID) is configured as a separate -# block in this configuration file. The network blocks are in preference order -# (the first match is used). -# -# network block fields: -# -# disabled: -# 0 = this network can be used (default) -# 1 = this network block is disabled (can be enabled through ctrl_iface, -# e.g., with wpa_cli or wpa_gui) -# -# id_str: Network identifier string for external scripts. This value is passed -# to external action script through wpa_cli as WPA_ID_STR environment -# variable to make it easier to do network specific configuration. -# -# ssid: SSID (mandatory); either as an ASCII string with double quotation or -# as hex string; network name -# -# scan_ssid: -# 0 = do not scan this SSID with specific Probe Request frames (default) -# 1 = scan with SSID-specific Probe Request frames (this can be used to -# find APs that do not accept broadcast SSID or use multiple SSIDs; -# this will add latency to scanning, so enable this only when needed) -# -# bssid: BSSID (optional); if set, this network block is used only when -# associating with the AP using the configured BSSID -# -# priority: priority group (integer) -# By default, all networks will get same priority group (0). If some of the -# networks are more desirable, this field can be used to change the order in -# which wpa_supplicant goes through the networks when selecting a BSS. The -# priority groups will be iterated in decreasing priority (i.e., the larger the -# priority value, the sooner the network is matched against the scan results). -# Within each priority group, networks will be selected based on security -# policy, signal strength, etc. -# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not -# using this priority to select the order for scanning. Instead, they try the -# networks in the order that used in the configuration file. -# -# mode: IEEE 802.11 operation mode -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) -# 1 = IBSS (ad-hoc, peer-to-peer) -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has -# to be set to 2 for IBSS. WPA-None requires following network block options: -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not -# both), and psk must also be set. -# -# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., -# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial -# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode. -# In addition, this value is only used by the station that creates the IBSS. If -# an IBSS network with the configured SSID is already present, the frequency of -# the network will be used instead of this configured value. -# -# proto: list of accepted protocols -# WPA = WPA/IEEE 802.11i/D3.0 -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) -# If not set, this defaults to: WPA RSN -# -# key_mgmt: list of accepted authenticated key management protocols -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) -# WPA-EAP = WPA using EAP authentication -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically -# generated WEP keys -# NONE = WPA is not used; plaintext or static WEP could be used -# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms -# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms -# If not set, this defaults to: WPA-PSK WPA-EAP -# -# auth_alg: list of allowed IEEE 802.11 authentication algorithms -# OPEN = Open System authentication (required for WPA/WPA2) -# SHARED = Shared Key authentication (requires static WEP keys) -# LEAP = LEAP/Network EAP (only used with LEAP) -# If not set, automatic selection is used (Open System with LEAP enabled if -# LEAP is allowed as one of the EAP methods). -# -# pairwise: list of accepted pairwise (unicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# NONE = Use only Group Keys (deprecated, should not be included if APs support -# pairwise keys) -# If not set, this defaults to: CCMP TKIP -# -# group: list of accepted group (broadcast/multicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 -# -# psk: WPA preshared key; 256-bit pre-shared key -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be -# generated using the passphrase and SSID). ASCII passphrase must be between -# 8 and 63 characters (inclusive). -# This field is not needed, if WPA-EAP is used. -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant -# startup and reconfiguration time can be optimized by generating the PSK only -# only when the passphrase or SSID has actually changed. -# -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) -# Dynamic WEP key required for non-WPA mode -# bit0 (1): require dynamically generated unicast WEP key -# bit1 (2): require dynamically generated broadcast WEP key -# (3 = require both keys; default) -# Note: When using wired authentication, eapol_flags must be set to 0 for the -# authentication to be completed successfully. -# -# mixed_cell: This option can be used to configure whether so called mixed -# cells, i.e., networks that use both plaintext and encryption in the same -# SSID, are allowed when selecting a BSS form scan results. -# 0 = disabled (default) -# 1 = enabled -# -# proactive_key_caching: -# Enable/disable opportunistic PMKSA caching for WPA2. -# 0 = disabled (default) -# 1 = enabled -# -# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or -# hex without quotation, e.g., 0102030405) -# wep_tx_keyidx: Default WEP key index (TX) (0..3) -# -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is -# allowed. This is only used with RSN/WPA2. -# 0 = disabled (default) -# 1 = enabled -#peerkey=1 -# -# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to -# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies. -# -# Following fields are only used with internal EAP implementation. -# eap: space-separated list of accepted EAP methods -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> -# cannot be used with WPA; to be used as a Phase 2 method -# with EAP-PEAP or EAP-TTLS) -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# OTP = EAP-OTP (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# GTC = EAP-GTC (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# TLS = EAP-TLS (client and server certificate) -# PEAP = EAP-PEAP (with tunnelled EAP authentication) -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 -# authentication) -# If not set, all compiled in methods are allowed. -# -# identity: Identity string for EAP -# This field is also used to configure user NAI for -# EAP-PSK/PAX/SAKE/GPSK. -# anonymous_identity: Anonymous identity string for EAP (to be used as the -# unencrypted identity with EAP types that support different tunnelled -# identity, e.g., EAP-TTLS) -# password: Password string for EAP. This field can include either the -# plaintext password (using ASCII or hex string) or a NtPasswordHash -# (16-byte MD4 hash of password) in hash:<32 hex digits> format. -# NtPasswordHash can only be used when the password is for MSCHAPv2 or -# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). -# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit -# PSK) is also configured using this field. For EAP-GPSK, this is a -# variable length PSK. -# ca_cert: File path to CA certificate file (PEM/DER). This file can have one -# or more trusted CA certificates. If ca_cert and ca_path are not -# included, server certificate will not be verified. This is insecure and -# a trusted CA certificate should always be configured when using -# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may -# change when wpa_supplicant is run in the background. -# On Windows, trusted CA certificates can be loaded from the system -# certificate store by setting this to cert_store://<name>, e.g., -# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# ca_path: Directory path for CA certificate files (PEM). This path may -# contain multiple CA certificates in OpenSSL format. Common use for this -# is to point to system trusted CA list which is often installed into -# directory like /etc/ssl/certs. If configured, these certificates are -# added to the list of trusted CAs. ca_cert may also be included in that -# case, but it is not required. -# client_cert: File path to client certificate file (PEM/DER) -# Full path should be used since working directory may change when -# wpa_supplicant is run in the background. -# Alternatively, a named configuration blob can be used by setting this -# to blob://<blob name>. -# private_key: File path to client private key file (PEM/DER/PFX) -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be -# commented out. Both the private key and certificate will be read from -# the PKCS#12 file in this case. Full path should be used since working -# directory may change when wpa_supplicant is run in the background. -# Windows certificate store can be used by leaving client_cert out and -# configuring private_key in one of the following formats: -# cert://substring_to_match -# hash://certificate_thumbprint_in_hex -# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# Alternatively, a named configuration blob can be used by setting this -# to blob://<blob name>. -# private_key_passwd: Password for private key file (if left out, this will be -# asked through control interface) -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA -# authentication does not use this configuration. However, it is possible -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with -# DSA keys always use ephemeral DH keys. This can be used to achieve -# forward secrecy. If the file is in DSA parameters format, it will be -# automatically converted into DH params. -# subject_match: Substring to be matched against the subject of the -# authentication server certificate. If this string is set, the server -# sertificate is only accepted if it contains this string in the subject. -# The subject string is in following format: -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -# altsubject_match: Semicolon separated string of entries to be matched against -# the alternative subject name of the authentication server certificate. -# If this string is set, the server sertificate is only accepted if it -# contains one of the entries in an alternative subject name extension. -# altSubjectName string is in following format: TYPE:VALUE -# Example: EMAIL:server@example.com -# Example: DNS:server.example.com;DNS:server2.example.com -# Following types are supported: EMAIL, DNS, URI -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters -# (string with field-value pairs, e.g., "peapver=0" or -# "peapver=1 peaplabel=1") -# 'peapver' can be used to force which PEAP version (0 or 1) is used. -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", -# to be used during key derivation when PEAPv1 or newer. Most existing -# PEAPv1 implementation seem to be using the old label, "client EAP -# encryption", and wpa_supplicant is now using that as the default value. -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to -# interoperate with PEAPv1; see eap_testing.txt for more details. -# 'peap_outer_success=0' can be used to terminate PEAP authentication on -# tunneled EAP-Success. This is required with some RADIUS servers that -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -# include_tls_length=1 can be used to force wpa_supplicant to include -# TLS Message Length field in all TLS messages even if they are not -# fragmented. -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three -# challenges (by default, it accepts 2 or 3) -# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use -# protected result indication. -# 'crypto_binding' option can be used to control PEAPv0 cryptobinding -# behavior: -# * 0 = do not use cryptobinding (default) -# * 1 = use cryptobinding if server supports it -# * 2 = require cryptobinding -# EAP-WSC (WPS) uses following options: pin=<Device Password> or -# pbc=1. -# phase2: Phase2 (inner authentication with TLS tunnel) parameters -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) -# Following certificate/private key fields are used in inner Phase2 -# authentication when using EAP-TTLS or EAP-PEAP. -# ca_cert2: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert2 and ca_path2 are not included, -# server certificate will not be verified. This is insecure and a trusted -# CA certificate should always be configured. -# ca_path2: Directory path for CA certificate files (PEM) -# client_cert2: File path to client certificate file -# private_key2: File path to client private key file -# private_key2_passwd: Password for private key file -# dh_file2: File path to DH/DSA parameters file (in PEM format) -# subject_match2: Substring to be matched against the subject of the -# authentication server certificate. -# altsubject_match2: Substring to be matched against the alternative subject -# name of the authentication server certificate. -# -# fragment_size: Maximum EAP fragment size in bytes (default 1398). -# This value limits the fragment size for EAP methods that support -# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set -# small enough to make the EAP messages fit in MTU of the network -# interface used for EAPOL. The default value is suitable for most -# cases. -# -# EAP-FAST variables: -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able -# to create this file and write updates to it when PAC is being -# provisioned or refreshed. Full path to the file should be used since -# working directory may change when wpa_supplicant is run in the -# background. Alternatively, a named configuration blob can be used by -# setting this to blob://<blob name> -# phase1: fast_provisioning option can be used to enable in-line provisioning -# of EAP-FAST credentials (PAC): -# 0 = disabled, -# 1 = allow unauthenticated provisioning, -# 2 = allow authenticated provisioning, -# 3 = allow both unauthenticated and authenticated provisioning -# fast_max_pac_list_len=<num> option can be used to set the maximum -# number of PAC entries to store in a PAC list (default: 10) -# fast_pac_format=binary option can be used to select binary format for -# storing PAC entries in order to save some space (the default -# text format uses about 2.5 times the size of minimal binary -# format) -# -# wpa_supplicant supports number of "EAP workarounds" to work around -# interoperability issues with incorrectly behaving authentication servers. -# These are enabled by default because some of the issues are present in large -# number of authentication servers. Strict EAP conformance mode can be -# configured by disabling workarounds with eap_workaround=0. - -# Example blocks: - -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers -network={ - ssid="simple" - psk="very secret passphrase" - priority=5 -} - -# Same as previous, but request SSID-specific scanning (for APs that reject -# broadcast SSID) -network={ - ssid="second ssid" - scan_ssid=1 - psk="very secret passphrase" - priority=2 -} - -# Only WPA-PSK is used. Any valid cipher combination is accepted. -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb - priority=2 -} - -# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=TKIP - group=TKIP - psk="not so secure passphrase" - wpa_ptk_rekey=600 -} - -# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 -# or WEP40 as the group cipher will not be accepted. -network={ - ssid="example" - proto=RSN - key_mgmt=WPA-EAP - pairwise=CCMP TKIP - group=CCMP TKIP - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - priority=1 -} - -# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel -# (e.g., Radiator) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=PEAP - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase1="peaplabel=1" - phase2="auth=MSCHAPV2" - priority=10 -} - -# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - priority=2 -} - -# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted -# use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase2="auth=MSCHAPV2" -} - -# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner -# authentication. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - # Phase1 / outer authentication - anonymous_identity="anonymous@example.com" - ca_cert="/etc/cert/ca.pem" - # Phase 2 / inner authentication - phase2="autheap=TLS" - ca_cert2="/etc/cert/ca2.pem" - client_cert2="/etc/cer/user.pem" - private_key2="/etc/cer/user.prv" - private_key2_passwd="password" - priority=2 -} - -# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and -# group cipher. -network={ - ssid="example" - bssid=00:11:22:33:44:55 - proto=WPA RSN - key_mgmt=WPA-PSK WPA-EAP - pairwise=CCMP - group=CCMP - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -} - -# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP -# and all valid ciphers. -network={ - ssid=00010203 - psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f -} - - -# EAP-SIM with a GSM SIM or USIM -network={ - ssid="eap-sim-test" - key_mgmt=WPA-EAP - eap=SIM - pin="1234" - pcsc="" -} - - -# EAP-PSK -network={ - ssid="eap-psk-test" - key_mgmt=WPA-EAP - eap=PSK - anonymous_identity="eap_psk_user" - password=06b4be19da289f475aa46a33cb793029 - identity="eap_psk_user@example.com" -} - - -# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using -# EAP-TLS for authentication and key generation; require both unicast and -# broadcast WEP keys. -network={ - ssid="1xtest" - key_mgmt=IEEE8021X - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - eapol_flags=3 -} - - -# LEAP with dynamic WEP keys -network={ - ssid="leap-example" - key_mgmt=IEEE8021X - eap=LEAP - identity="user" - password="foobar" -} - -# EAP-IKEv2 using shared secrets for both server and peer authentication -network={ - ssid="ikev2-example" - key_mgmt=WPA-EAP - eap=IKEV2 - identity="user" - password="foobar" -} - -# EAP-FAST with WPA (WPA or WPA2) -network={ - ssid="eap-fast-test" - key_mgmt=WPA-EAP - eap=FAST - anonymous_identity="FAST-000102030405" - identity="username" - password="password" - phase1="fast_provisioning=1" - pac_file="/etc/wpa_supplicant.eap-fast-pac" -} - -network={ - ssid="eap-fast-test" - key_mgmt=WPA-EAP - eap=FAST - anonymous_identity="FAST-000102030405" - identity="username" - password="password" - phase1="fast_provisioning=1" - pac_file="blob://eap-fast-pac" -} - -# Plaintext connection (no WPA, no IEEE 802.1X) -network={ - ssid="plaintext-test" - key_mgmt=NONE -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) -network={ - ssid="static-wep-test" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key -# IEEE 802.11 authentication -network={ - ssid="static-wep-test2" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 - auth_alg=SHARED -} - - -# IBSS/ad-hoc network with WPA-None/TKIP. -network={ - ssid="test adhoc" - mode=1 - frequency=2412 - proto=WPA - key_mgmt=WPA-NONE - pairwise=NONE - group=TKIP - psk="secret passphrase" -} - - -# Catch all example that allows more or less all configuration modes -network={ - ssid="example" - scan_ssid=1 - key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk="very secret passphrase" - eap=TTLS PEAP TLS - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - phase1="peaplabel=0" -} - -# Example of EAP-TLS with smartcard (openssl engine) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TLS - proto=RSN - pairwise=CCMP TKIP - group=CCMP TKIP - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - - engine=1 - - # The engine configured here must be available. Look at - # OpenSSL engine support in the global section. - # The key available through the engine must be the private key - # matching the client certificate configured above. - - # use the opensc engine - #engine_id="opensc" - #key_id="45" - - # use the pkcs11 engine - engine_id="pkcs11" - key_id="id_45" - - # Optional PIN configuration; this can be left out and PIN will be - # asked through the control interface - pin="1234" -} - -# Example configuration showing how to use an inlined blob as a CA certificate -# data instead of using external file -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="blob://exampleblob" - priority=20 -} - -blob-base64-exampleblob={ -SGVsbG8gV29ybGQhCg== -} - - -# Wildcard match for SSID (plaintext APs only). This example select any -# open AP regardless of its SSID. -network={ - key_mgmt=NONE -} -network={ - ssid="myxjtu2" - scan_ssid=1 - key_mgmt=WPA-PSK - psk="xjtudlc3731" - disabled=0 - key_mgmt=NONE - wep_key0="12345" - wep_key1=1234567890 - wep_key2="zxcvb" - wep_tx_keyidx=1 - auth_alg=OPEN - mode=1 -} -network={ - ssid=ab3ace - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="blob://exampleblob" - priority=20 -} |