diff options
Diffstat (limited to 'src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml')
| -rw-r--r-- | src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml b/src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml index d051725d..b0ad2d21 100644 --- a/src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml +++ b/src/libnm-client-impl/nm-property-infos-ifcfg-rh.xml @@ -8,7 +8,7 @@ <property name="priority" variable="BRIDGING_OPTS: priority=" format="" values="0 - 63" default="32" example="" description="STP priority." /><property name="path-cost" variable="BRIDGING_OPTS: path_cost=" format="" values="1 - 65535" default="100" example="" description="STP cost." /><property name="hairpin-mode" variable="BRIDGING_OPTS: hairpin_mode=" format="" values="" default="yes" example="" description="Hairpin mode of the bridge port." /><property name="vlans" variable="BRIDGE_PORT_VLANS" format="" values="" default="" example="BRIDGE_PORT_VLANS="1 pvid untagged,20,300-400 untagged"" description="List of VLANs on the bridge port" /></setting><setting name="bridge"> <property name="mac-address" variable="BRIDGE_MACADDR(+)" format="" values="" default="" example="" description="MAC address of the bridge. Note that this requires a recent kernel support, originally introduced in 3.15 upstream kernel) BRIDGE_MACADDR for bridges is an NM extension." /><property name="stp" variable="STP" format="" values="" default="no" example="" description="Span tree protocol participation." /><property name="priority" variable="BRIDGING_OPTS: priority=" format="" values="0 - 32768" default="32768" example="" description="STP priority." /><property name="forward-delay" variable="DELAY" format="" values="2 - 30" default="15" example="" description="STP forwarding delay." /><property name="hello-time" variable="BRIDGING_OPTS: hello_time=" format="" values="1 - 10" default="2" example="" description="STP hello time." /><property name="max-age" variable="BRIDGING_OPTS: max_age=" format="" values="6 - 40" default="20" example="" description="STP maximum message age." /><property name="ageing-time" variable="BRIDGING_OPTS: ageing_time=" format="" values="0 - 1000000" default="300" example="" description="Ethernet MAC ageing time." /><property name="multicast-snooping" variable="BRIDGING_OPTS: multicast_snooping=" format="" values="0 or 1" default="1" example="" description="IGMP snooping support." /><property name="vlan-filtering" variable="BRIDGING_OPTS: vlan_filtering=" format="" values="0 or 1" default="0" example="" description="VLAN filtering support." /><property name="vlan-default-pvid" variable="BRIDGING_OPTS: default_pvid=" format="" values="0 - 4094" default="1" example="" description="default VLAN PVID." /><property name="vlans" variable="BRIDGE_VLANS" format="" values="" default="" example="BRIDGE_VLANS="1 pvid untagged,20,300-400 untagged"" description="List of VLANs on the bridge" /><property name="group-address" variable="BRIDGING_OPTS: group_address=" format="" values="" default="" example="BRIDGING_OPTS="group_address=01:80:C2:00:00:0A"" description="STP group address." /><property name="vlan-protocol" variable="BRIDGING_OPTS: vlan_protocol=" format="" values="" default="" example="BRIDGING_OPTS="vlan_protocol=802.1Q"" description="VLAN filtering protocol." /><property name="vlan-stats-enabled" variable="BRIDGING_OPTS: vlan_stats_enabled=" format="" values="" default="0" example="BRIDGING_OPTS="vlan_stats_enabled=1"" description="" /><property name="multicast-router" variable="BRIDGING_OPTS: multicast_router=" format="" values="auto, enabled, disabled" default="auto" example="BRIDGING_OPTS="multicast_router=enabled"" description="" /><property name="multicast-query-use-ifaddr" variable="BRIDGING_OPTS: multicast_query_use_ifaddr=" format="" values="" default="0" example="BRIDGING_OPTS="multicast_query-use_ifaddr=1"" description="" /><property name="multicast-querier" variable="BRIDGING_OPTS: multicast_querier=" format="" values="" default="0" example="BRIDGING_OPTS="multicast_querier=1"" description="" /><property name="multicast-hash-max" variable="BRIDGING_OPTS: multicast_hash_max=" format="" values="" default="4096" example="BRIDGING_OPTS="multicast_hash_max=8192"" description="" /><property name="multicast-last-member-count" variable="BRIDGING_OPTS: multicast_last_member_count=" format="" values="" default="2" example="BRIDGING_OPTS="multicast_last_member_count=4"" description="" /><property name="multicast-last-member-interval" variable="BRIDGING_OPTS: multicast_last_member_interval=" format="" values="" default="100" example="BRIDGING_OPTS="multicast_last_member_interval=200"" description="" /><property name="multicast-membership-interval" variable="BRIDGING_OPTS: multicast_membership_interval=" format="" values="" default="26000" example="BRIDGING_OPTS="multicast_membership_interval=16000"" description="" /><property name="multicast-querier-interval" variable="BRIDGING_OPTS: multicast_querier_interval=" format="" values="" default="25500" example="BRIDGING_OPTS="multicast_querier_interval=20000"" description="" /><property name="multicast-query-interval" variable="BRIDGING_OPTS: multicast_query_interval=" format="" values="" default="12500" example="BRIDGING_OPTS="multicast_query_interval=22500"" description="" /><property name="multicast-query-response-interval" variable="BRIDGING_OPTS: multicast_query_response_interval=" format="" values="" default="1000" example="BRIDGING_OPTS="multicast_query_response_interval=2000"" description="" /><property name="multicast-startup-query-count" variable="BRIDGING_OPTS: multicast_startup_query_count=" format="" values="" default="2" example="BRIDGING_OPTS="multicast_startup_query_count=4"" description="" /><property name="multicast-startup-query-interval" variable="BRIDGING_OPTS: multicast_startup_query_interval=" format="" values="" default="3125" example="BRIDGING_OPTS="multicast_startup_query_interval=4000"" description="" /></setting><setting name="cdma"> </setting><setting name="connection"> -<property name="id" variable="NAME(+)" format="" values="" default="" example="" description="User friendly name for the connection profile." /><property name="uuid" variable="UUID(+)" format="" values="" default="" example="" description="UUID for the connection profile. When missing, NetworkManager creates the UUID itself (by hashing the filename)." /><property name="stable-id" variable="STABLE_ID(+)" format="" values="" default="" example="" description="Token to generate stable IDs." /><property name="interface-name" variable="DEVICE" format="" values="" default="" example="" description="Interface name of the device this profile is bound to. The variable can be left out when the profile should apply for more devices. Note that DEVICE can be required for some connection types." /><property name="type" variable="TYPE (DEVICETYPE, DEVICE)" format="" values="Ethernet, Wireless, InfiniBand, Bridge, Bond, Vlan, Team, TeamPort" default="" example="TYPE=Ethernet; TYPE=Bond; TYPE=Bridge; DEVICETYPE=TeamPort" description="Base type of the connection. DEVICETYPE is used for teaming connections." /><property name="permissions" variable="USERS(+)" format="" values="" default="" example="USERS="joe bob"" description="Restrict to certain users the access to this connection, and allow the connection to be active only when at least one of the specified users is logged into an active session." /><property name="autoconnect" variable="ONBOOT" format="" values="" default="yes" example="" description="Whether the connection should be autoconnected (not only while booting)." /><property name="autoconnect-priority" variable="AUTOCONNECT_PRIORITY(+)" format="" values="-999 to 999" default="0" example="AUTOCONNECT_PRIORITY=20" description="Connection priority for automatic activation. Connections with higher numbers are preferred when selecting profiles for automatic activation." /><property name="autoconnect-retries" variable="AUTOCONNECT_RETRIES(+)" format="" values="-1 (use global default), 0 (forever) or a positive value" default="" example="AUTOCONNECT_RETRIES=1" description="The number of times a connection should be autoactivated before giving up and switching to the next one." /><property name="multi-connect" variable="MULTI_CONNECT(+)" format="" values="" default="" example="MULTI_CONNECT=3" description="whether the profile can be active on multiple devices at a given moment. The values are numbers corresponding to #NMConnectionMultiConnect enum." /><property name="zone" variable="ZONE(+)" format="" values="" default="" example="ZONE=Work" description="Trust level of this connection. The string is usually used for a firewall." /><property name="master" variable="MASTER, MASTER_UUID, TEAM_MASTER, TEAM_MASTER_UUID, BRIDGE, BRIDGE_UUID" format="" values="" default="" example="" description="Reference to master connection. The variable used depends on the connection type and the value. In general, if the *_UUID variant is present, the variant without *_UUID is ignored. NetworkManager attempts to write both for compatibility with legacy tooling." /><property name="slave-type" variable="MASTER, MASTER_UUID, TEAM_MASTER, TEAM_MASTER_UUID, DEVICETYPE, BRIDGE, BRIDGE_UUID" format="" values="" default="" example="" description="Slave type doesn't map directly to a variable, but it is recognized using different variables. MASTER and MASTER_UUID for bonding, TEAM_MASTER, TEAM_MASTER_UUID and DEVICETYPE for teaming, BRIDGE and BRIDGE_UUID for bridging." /><property name="autoconnect-slaves" variable="AUTOCONNECT_SLAVES(+)" format="" values="" default="missing variable means global default" example="" description="Whether slaves of this connection should be auto-connected when this connection is activated." /><property name="secondaries" variable="SECONDARY_UUIDS(+)" format="" values="" default="" example="" description="UUID of VPN connections that should be activated together with this connection." /><property name="gateway-ping-timeout" variable="GATEWAY_PING_TIMEOUT(+)" format="" values="" default="0" example="GATEWAY_PING_TIMEOUT=5" description="If greater than zero, the IP connectivity will be checked by pinging the gateway and waiting for the specified timeout (in seconds)." /><property name="metered" variable="CONNECTION_METERED(+)" format="" values="yes,no,unknown" default="" example="CONNECTION_METERED=yes" description="Whether the device is metered" /><property name="lldp" variable="LLDP(+)" format="" values="boolean value or 'rx'" default="missing variable means global default" example="LLDP=no" description="whether LLDP is enabled for the connection" /><property name="auth-retries" variable="AUTH_RETRIES(+)" format="" values="" default="0" example="" description="Number of retries for authentication." /><property name="mdns" variable="MDNS(+)" format="" values="yes,no,resolve" default="missing variable means global default" example="MDNS=yes" description="Whether or not mDNS is enabled for the connection" /><property name="llmnr" variable="LLMNR(+)" format="" values="yes,no,resolve" default="missing variable means global default" example="LLMNR=yes" description="Whether or not LLMNR is enabled for the connection" /><property name="dns-over-tls" variable="DNS_OVER_TLS(+)" format="" values="yes,no,opportunistic" default="missing variable means global default" example="" description="Whether or not DNSOverTls is enabled for the connection" /><property name="wait-device-timeout" variable="DEVTIMEOUT(+)" format="" values="timeout in seconds." default="" example="DEVTIMEOUT=5" description="for initscripts compatibility, this variable must be a whole integer. If necessary, NetworkManager stores also a fractional component for the milliseconds." /><property name="mud-url" variable="MUD_URL" format="" values="a valid URL that points to recommended policy for this device" default="" example="https://yourdevice.example.com/model.json" description="MUD_URL to be sent by device (See RFC 8520)." /></setting><setting name="dcb"> +<property name="id" variable="NAME(+)" format="" values="" default="" example="" description="User friendly name for the connection profile." /><property name="uuid" variable="UUID(+)" format="" values="" default="" example="" description="UUID for the connection profile. When missing, NetworkManager creates the UUID itself (by hashing the filename)." /><property name="stable-id" variable="STABLE_ID(+)" format="" values="" default="" example="" description="Token to generate stable IDs." /><property name="interface-name" variable="DEVICE" format="" values="" default="" example="" description="Interface name of the device this profile is bound to. The variable can be left out when the profile should apply for more devices. Note that DEVICE can be required for some connection types." /><property name="type" variable="TYPE (DEVICETYPE, DEVICE)" format="" values="Ethernet, Wireless, InfiniBand, Bridge, Bond, Vlan, Team, TeamPort" default="" example="TYPE=Ethernet; TYPE=Bond; TYPE=Bridge; DEVICETYPE=TeamPort" description="Base type of the connection. DEVICETYPE is used for teaming connections." /><property name="permissions" variable="USERS(+)" format="" values="" default="" example="USERS="joe bob"" description="Restrict to certain users the access to this connection, and allow the connection to be active only when at least one of the specified users is logged into an active session." /><property name="autoconnect" variable="ONBOOT" format="" values="" default="yes" example="" description="Whether the connection should be autoconnected (not only while booting)." /><property name="autoconnect-priority" variable="AUTOCONNECT_PRIORITY(+)" format="" values="-999 to 999" default="0" example="AUTOCONNECT_PRIORITY=20" description="Connection priority for automatic activation. Connections with higher numbers are preferred when selecting profiles for automatic activation." /><property name="autoconnect-retries" variable="AUTOCONNECT_RETRIES(+)" format="" values="-1 (use global default), 0 (forever) or a positive value" default="" example="AUTOCONNECT_RETRIES=1" description="The number of times a connection should be autoactivated before giving up and switching to the next one." /><property name="multi-connect" variable="MULTI_CONNECT(+)" format="" values="" default="" example="MULTI_CONNECT=3" description="whether the profile can be active on multiple devices at a given moment. The values are numbers corresponding to #NMConnectionMultiConnect enum." /><property name="zone" variable="ZONE(+)" format="" values="" default="" example="ZONE=Work" description="Trust level of this connection. The string is usually used for a firewall." /><property name="master" variable="MASTER, MASTER_UUID, TEAM_MASTER, TEAM_MASTER_UUID, BRIDGE, BRIDGE_UUID" format="" values="" default="" example="" description="Reference to master connection. The variable used depends on the connection type and the value. In general, if the *_UUID variant is present, the variant without *_UUID is ignored. NetworkManager attempts to write both for compatibility with legacy tooling." /><property name="slave-type" variable="MASTER, MASTER_UUID, TEAM_MASTER, TEAM_MASTER_UUID, DEVICETYPE, BRIDGE, BRIDGE_UUID" format="" values="" default="" example="" description="Slave type doesn't map directly to a variable, but it is recognized using different variables. MASTER and MASTER_UUID for bonding, TEAM_MASTER, TEAM_MASTER_UUID and DEVICETYPE for teaming, BRIDGE and BRIDGE_UUID for bridging." /><property name="autoconnect-slaves" variable="AUTOCONNECT_SLAVES(+)" format="" values="" default="missing variable means global default" example="" description="Whether slaves of this connection should be auto-connected when this connection is activated." /><property name="secondaries" variable="SECONDARY_UUIDS(+)" format="" values="" default="" example="" description="UUID of VPN connections that should be activated together with this connection." /><property name="gateway-ping-timeout" variable="GATEWAY_PING_TIMEOUT(+)" format="" values="" default="0" example="GATEWAY_PING_TIMEOUT=5" description="If greater than zero, the IP connectivity will be checked by pinging the gateway and waiting for the specified timeout (in seconds)." /><property name="metered" variable="CONNECTION_METERED(+)" format="" values="yes,no,unknown" default="" example="CONNECTION_METERED=yes" description="Whether the device is metered" /><property name="lldp" variable="LLDP(+)" format="" values="boolean value or 'rx'" default="missing variable means global default" example="LLDP=no" description="whether LLDP is enabled for the connection" /><property name="auth-retries" variable="AUTH_RETRIES(+)" format="" values="" default="0" example="" description="Number of retries for authentication." /><property name="mdns" variable="MDNS(+)" format="" values="yes,no,resolve" default="missing variable means global default" example="MDNS=yes" description="Whether or not mDNS is enabled for the connection" /><property name="llmnr" variable="LLMNR(+)" format="" values="yes,no,resolve" default="missing variable means global default" example="LLMNR=yes" description="Whether or not LLMNR is enabled for the connection" /><property name="dns-over-tls" variable="DNS_OVER_TLS(+)" format="" values="yes,no,opportunistic" default="missing variable means global default" example="" description="Whether or not DNSOverTls is enabled for the connection" /><property name="mptcp-flags" variable="MPTCP_FLAGS(+)" format="" values="" default="missing variable means global default" example="MPTCP_FLAGS="signal,subflow"" description="The MPTCP flags that indicate whether MPTCP is enabled and which flags to use for the address endpoints." /><property name="wait-device-timeout" variable="DEVTIMEOUT(+)" format="" values="timeout in seconds." default="" example="DEVTIMEOUT=5" description="for initscripts compatibility, this variable must be a whole integer. If necessary, NetworkManager stores also a fractional component for the milliseconds." /><property name="mud-url" variable="MUD_URL" format="" values="a valid URL that points to recommended policy for this device" default="" example="https://yourdevice.example.com/model.json" description="MUD_URL to be sent by device (See RFC 8520)." /><property name="wait-activation-delay" variable="WAIT_ACTIVATION_DELAY(+)" format="" values="delay in milliseconds." default="" example="WAIT_ACTIVATION_DELAY=5000" description="Time in milliseconds to wait for connection to be considered activated. The wait will start after the pre-up dispatcher event." /></setting><setting name="dcb"> <property name="app-fcoe-flags" variable="DCB_APP_FCOE_ENABLE, DCB_APP_FCOE_ADVERTISE, DCB_APP_FCOE_WILLING" format="" values="" default="no" example="DCB_APP_FCOE_ENABLE=yes DCB_APP_FCOE_ADVERTISE=yes" description="FCOE flags." /><property name="app-fcoe-priority" variable="DCB_APP_FCOE_PRIORITY" format="" values="0 - 7" default="" example="" description="Priority of FCoE frames." /><property name="app-fcoe-mode" variable="DCB_APP_FCOE_MODE" format="" values="fabric, vn2vn" default="fabric" example="" description="FCoE controller mode." /><property name="app-iscsi-flags" variable="DCB_APP_ISCSI_ENABLE, DCB_APP_ISCSI_ADVERTISE, DCB_APP_ISCSI_WILLING" format="" values="" default="no" example="" description="iSCSI flags." /><property name="app-iscsi-priority" variable="DCB_APP_ISCSI_PRIORITY" format="" values="0 - 7" default="" example="" description="Priority of iSCSI frames." /><property name="app-fip-flags" variable="DCB_APP_FIP_ENABLE, DCB_APP_FIP_ADVERTISE, DCB_APP_FIP_WILLING" format="" values="" default="no" example="" description="FIP flags." /><property name="app-fip-priority" variable="DCB_APP_FIP_PRIORITY" format="" values="0 - 7" default="" example="" description="Priority of FIP frames." /><property name="priority-flow-control-flags" variable="DCB_PFC_ENABLE, DCB_PFC_ADVERTISE, DCB_PFC_WILLING" format="" values="" default="no" example="" description="Priority flow control flags." /><property name="priority-flow-control" variable="DCB_PFC_UP" format="" values="" default="" example="DCB_PFC_UP=01101110" description="Priority flow control values. String of 8 "0" and "1", where "0". means "do not transmit priority pause", "1" means "transmit pause"." /><property name="priority-group-flags" variable="DCB_PG_ENABLE, DCB_PG_ADVERTISE, DCB_PG_WILLING" format="" values="" default="no" example="" description="Priority groups flags." /><property name="priority-group-id" variable="DCB_PG_ID" format="" values="" default="" example="DCB_PG_ID=1205f173" description="Priority groups values. String of eight priorities (0 - 7) or "f" (unrestricted)." /><property name="priority-group-bandwidth" variable="DCB_PG_PCT" format="" values="" default="" example="DCB_PG_PCT=10,5,10,15,10,10,10,30" description="Priority groups values. Eight bandwidths (in percent), separated with commas." /><property name="priority-bandwidth" variable="DCB_PG_UPPCT" format="" values="" default="" example="DCB_PG_UPPCT=7,13,10,10,15,15,10,20" description="Priority values. Eight bandwidths (in percent), separated with commas. The sum of the numbers must be 100." /><property name="priority-strict-bandwidth" variable="DCB_PG_STRICT" format="" values="" default="" example="DCB_PG_STRICT=01101110" description="Priority values. String of eight "0" or "1", where "0" means "may not utilize all bandwidth", "1" means "may utilize all bandwidth"." /><property name="priority-traffic-class" variable="DCB_PG_UP2TC" format="" values="" default="" example="DCB_PG_UP2TC=01623701" description="Priority values. String of eight traffic class values (0 - 7)." /></setting><setting name="dummy"> </setting><setting name="ethtool"> </setting><setting name="generic"> @@ -17,8 +17,8 @@ <property name="priority" variable="HOSTNAME_PRIORITY(+)" format="" values="" default="missing variable means global value or 100" example="HOSTNAME_PRIORITY=50" description="hostname priority" /><property name="from-dhcp" variable="HOSTNAME_FROM_DHCP(+)" format="" values="" default="missing variable means global default or 1" example="HOSTNAME_FROM_DHCP=0,1" description="whether the system hostname can be determined from DHCP" /><property name="from-dhcp" variable="HOSTNAME_FROM_DNS_LOOKUP(+)" format="" values="" default="missing variable means global default or 1" example="HOSTNAME_FROM_DNS_LOOKUP=0,1" description="whether the system hostname can be determined from reverse DNS lookup" /><property name="only-best-device" variable="HOSTNAME_ONLY_FROM_DEFAULT(+)" format="" values="" default="missing variable means global default or 1" example="HOSTNAME_ONLY_FROM_DEFAULT=0,1" description="whether the hostname can be determined only from devices with the default route" /></setting><setting name="infiniband"> <property name="mac-address" variable="HWADDR" format="" values="" default="" example="HWADDR=01:02:03:04:05:06:07:08:09:0A:01:02:03:04:05:06:07:08:09:11" description="IBoIP 20-byte hardware address of the device (in traditional hex-digits-and-colons notation). Note that for initscripts this is the current MAC address of the device as found during ifup. For NetworkManager this is the permanent MAC address. Or in case no permanent MAC address exists, the MAC address initially configured on the device." /><property name="mtu" variable="MTU" format="" values="" default="" example="" description="MTU of the interface." /><property name="transport-mode" variable="CONNECTED_MODE" format="" values="" default="CONNECTED_MODE=no" example="" description="CONNECTED_MODE=yes for "connected" mode, CONNECTED_MODE=no for "datagram" mode" /><property name="p-key" variable="PKEY_ID (and PKEY=yes)" format="" values="" default="PKEY=no" example="PKEY=yes PKEY_ID=2 PHYSDEV=mlx4_ib0 DEVICE=mlx4_ib0.8002" description="InfiniBand P_Key. The value can be a hex number prefixed with "0x" or a decimal number. When PKEY_ID is specified, PHYSDEV and DEVICE also must be specified." /><property name="parent" variable="PHYSDEV (PKEY=yes)" format="" values="" default="PKEY=no" example="PHYSDEV=ib0" description="InfiniBand parent device." /></setting><setting name="ip-tunnel"> </setting><setting name="ipv4"> -<property name="method" variable="BOOTPROTO" format="string" values="none, dhcp (bootp), static, ibft, autoip, shared" default="none" example="" description="Method used for IPv4 protocol configuration." /><property name="dns" variable="DNS1, DNS2, ..." format="string" values="" default="" example="DNS1=1.2.3.4 DNS2=10.0.0.254 DNS3=8.8.8.8" description="List of DNS servers. Even if NetworkManager supports many DNS servers, initscripts and resolver only care about the first three, usually." /><property name="dns-search" variable="DOMAIN" format="string (space-separated domains)" values="" default="" example="" description="List of DNS search domains." /><property name="addresses" variable="IPADDR, PREFIX (NETMASK), IPADDR1, PREFIX1 (NETMASK1), ..." format="" values="" default="" example="IPADDR=10.5.5.23 PREFIX=24 IPADDR1=1.1.1.2 PREFIX1=16" description="List of static IP addresses." /><property name="gateway" variable="GATEWAY" format="" values="" default="" example="GATEWAY=10.5.5.1" description="Gateway IP address." /><property name="routes" variable="ADDRESS1, NETMASK1, GATEWAY1, METRIC1, OPTIONS1, ..." format="" values="" default="" example="" description="List of static routes. They are not stored in ifcfg-* file, but in route-* file instead." /><property name="ignore-auto-routes" variable="PEERROUTES(+)" format="" values="" default="yes" example="" description="PEERROUTES has the opposite meaning as 'ignore-auto-routes' property." /><property name="ignore-auto-dns" variable="PEERDNS" format="" values="" default="yes" example="" description="PEERDNS has the opposite meaning as 'ignore-auto-dns' property." /><property name="dhcp-send-hostname" variable="DHCP_SEND_HOSTNAME(+)" format="" values="" default="yes" example="" description="Whether DHCP_HOSTNAME should be sent to the DHCP server." /><property name="dhcp-hostname" variable="DHCP_HOSTNAME" format="" values="" default="" example="" description="Hostname to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used." /><property name="never-default" variable="DEFROUTE (GATEWAYDEV in /etc/sysconfig/network)" format="" values="" default="yes" example="" description="DEFROUTE=no tells NetworkManager that this connection should not be assigned the default route. DEFROUTE has the opposite meaning as 'never-default' property." /><property name="may-fail" variable="IPV4_FAILURE_FATAL(+)" format="" values="" default="no" example="" description="IPV4_FAILURE_FATAL has the opposite meaning as 'may-fail' property." /><property name="route-metric" variable="IPV4_ROUTE_METRIC(+)" format="" values="" default="-1" example="" description="IPV4_ROUTE_METRIC is the default IPv4 metric for routes on this connection. If set to -1, a default metric based on the device type is used." /><property name="route-table" variable="IPV4_ROUTE_TABLE(+)" format="" values="" default="0" example="" description="IPV4_ROUTE_TABLE enables policy-routing and sets the default routing table." /><property name="dns-options" variable="RES_OPTIONS(+)" format="" values="" default="" example="RES_OPTIONS=ndots:2 timeout:3" description="List of DNS options to be added to /etc/resolv.conf" /><property name="dns-priority" variable="IPV4_DNS_PRIORITY(+)" format="" values="" default="0" example="IPV4_DNS_PRIORITY=20" description="The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used." /><property name="dhcp-client-id" variable="DHCP_CLIENT_ID(+)" format="" values="" default="" example="DHCP_CLIENT_ID=ax-srv-1; DHCP_CLIENT_ID=01:44:44:44:44:44:44" description="A string sent to the DHCP server to identify the local machine. A binary value can be specified using hex notation ('aa:bb:cc')." /><property name="dad-timeout" variable="ACD_TIMEOUT(+), ARPING_WAIT" format="" values="" default="missing variable means global default (config override or zero)" example="ACD_TIMEOUT=2000 or ARPING_WAIT=2" description="Timeout (in milliseconds for ACD_TIMEOUT or in seconds for ARPING_WAIT) for address conflict detection before configuring IPv4 addresses. 0 turns off the ACD completely, -1 means default value." /><property name="dhcp-timeout" variable="IPV4_DHCP_TIMEOUT(+)" format="" values="" default="" example="IPV4_DHCP_TIMEOUT=10" description="A timeout after which the DHCP transaction fails in case of no response." /><property name="dhcp-fqdn" variable="DHCP_FQDN" format="" values="" default="" example="DHCP_FQDN=foo.bar.com" description="FQDN to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used." /><property name="dhcp-vendor-class-identifier" variable="DHCP_VENDOR_CLASS_IDENTIFIER(+)" format="" values="" default="" example="DHCP_VENDOR_CLASS_IDENTIFIER=foo" description="The Vendor Class Identifier DHCP option (60)." /></setting><setting name="ipv6"> -<property name="method" variable="IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C, IPV6_DISABLED" format="" values="" default="IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no" example="" description="Method used for IPv6 protocol configuration. ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes; disabled ~ IPV6_DISABLED=yes" /><property name="dns" variable="DNS1, DNS2, ..." format="string" values="" default="" example="" description="List of DNS servers. NetworkManager uses the variables both for IPv4 and IPv6." /><property name="dns-search" variable="IPV6_DOMAIN(+)" format="string (space-separated domains)" values="" default="" example="" description="List of DNS search domains." /><property name="addresses" variable="IPV6ADDR, IPV6ADDR_SECONDARIES" format="" values="" default="" example="IPV6ADDR=ab12:9876::1 IPV6ADDR_SECONDARIES="ab12:9876::2 ab12:9876::3"" description="List of static IP addresses." /><property name="gateway" variable="IPV6_DEFAULTGW" format="" values="" default="" example="IPV6_DEFAULTGW=abbe::1" description="Gateway IP address." /><property name="routes" variable="(none)" format="" values="" default="" example="" description="List of static routes. They are not stored in ifcfg-* file, but in route6-* file instead in the form of command line for 'ip route add'." /><property name="ignore-auto-routes" variable="IPV6_PEERROUTES(+)" format="" values="" default="yes" example="" description="IPV6_PEERROUTES has the opposite meaning as 'ignore-auto-routes' property." /><property name="ignore-auto-dns" variable="IPV6_PEERDNS(+)" format="" values="" default="yes" example="" description="IPV6_PEERDNS has the opposite meaning as 'ignore-auto-dns' property." /><property name="dhcp-hostname" variable="DHCPV6_HOSTNAME" format="" values="" default="" example="" description="Hostname to send the DHCP server." /><property name="dhcp-timeout" variable="IPV6_DHCP_TIMEOUT(+)" format="" values="" default="" example="IPV6_DHCP_TIMEOUT=10" description="A timeout after which the DHCP transaction fails in case of no response." /><property name="dhcp-hostname-flags" variable="DHCPV6_HOSTNAME_FLAGS" format="" values="" default="" example="DHCPV6_HOSTNAME_FLAGS=5" description="flags for the DHCP hostname property" /><property name="never-default" variable="IPV6_DEFROUTE(+), (and IPV6_DEFAULTGW, IPV6_DEFAULTDEV in /etc/sysconfig/network)" format="" values="" default="IPV6_DEFROUTE=yes (when no variable specified)" example="" description="IPV6_DEFROUTE=no tells NetworkManager that this connection should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite meaning as 'never-default' property." /><property name="may-fail" variable="IPV6_FAILURE_FATAL(+)" format="" values="" default="no" example="" description="IPV6_FAILURE_FATAL has the opposite meaning as 'may-fail' property." /><property name="route-metric" variable="IPV6_ROUTE_METRIC(+)" format="" values="" default="-1" example="" description="IPV6_ROUTE_METRIC is the default IPv6 metric for routes on this connection. If set to -1, a default metric based on the device type is used." /><property name="route-table" variable="IPV6_ROUTE_TABLE(+)" format="" values="" default="0" example="" description="IPV6_ROUTE_TABLE enables policy-routing and sets the default routing table." /><property name="dns-priority" variable="IPV6_DNS_PRIORITY(+)" format="" values="" default="0" example="IPV6_DNS_PRIORITY=20" description="The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used." /><property name="dns-options" variable="IPV6_RES_OPTIONS(+)" format="" values="" default="" example="IPV6_RES_OPTIONS=ndots:2 timeout:3" description="List of DNS options to be added to /etc/resolv.conf" /><property name="ip6-privacy" variable="IPV6_PRIVACY, IPV6_PRIVACY_PREFER_PUBLIC_IP(+)" format="" values="IPV6_PRIVACY: no, yes (rfc3041 or rfc4941); IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no" default="no" example="IPV6_PRIVACY=rfc3041 IPV6_PRIVACY_PREFER_PUBLIC_IP=yes" description="Configure IPv6 Privacy Extensions for SLAAC (RFC4941)." /><property name="addr-gen-mode" variable="IPV6_ADDR_GEN_MODE" format="" values="IPV6_ADDR_GEN_MODE: eui64, stable-privacy" default="eui64" example="IPV6_ADDR_GEN_MODE=stable-privacy" description="Configure IPv6 Stable Privacy addressing for SLAAC (RFC7217)." /><property name="token" variable="IPV6_TOKEN" format="" values="" default="" example="IPV6_TOKEN=::53" description="The IPv6 tokenized interface identifier token" /><property name="dhcp-timeout" variable="IPV6_RA_TIMEOUT(+)" format="" values="" default="" example="IPV6_RA_TIMEOUT=10" description="A timeout for waiting Router Advertisements in seconds." /><property name="dhcp-duid" variable="DHCPV6_DUID(+)" format="" values="" default="" example="DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DUID=03:01:de:ad:be:ef:00:01" description="A string sent to the DHCPv6 server to identify the local machine. Apart from the special values "lease", "stable-llt", "stable-ll", "stable-uuid", "llt" and "ll" a binary value in hex format is expected. An hex string where each octet is separated by a colon is also accepted." /></setting><setting name="macsec"> +<property name="method" variable="BOOTPROTO" format="string" values="none, dhcp (bootp), static, ibft, autoip, shared" default="none" example="" description="Method used for IPv4 protocol configuration." /><property name="dns" variable="DNS1, DNS2, ..." format="string" values="" default="" example="DNS1=1.2.3.4 DNS2=10.0.0.254 DNS3=8.8.8.8" description="List of DNS servers. Even if NetworkManager supports many DNS servers, initscripts and resolver only care about the first three, usually." /><property name="dns-search" variable="DOMAIN" format="string (space-separated domains)" values="" default="" example="" description="List of DNS search domains." /><property name="addresses" variable="IPADDR, PREFIX (NETMASK), IPADDR1, PREFIX1 (NETMASK1), ..." format="" values="" default="" example="IPADDR=10.5.5.23 PREFIX=24 IPADDR1=1.1.1.2 PREFIX1=16" description="List of static IP addresses." /><property name="gateway" variable="GATEWAY" format="" values="" default="" example="GATEWAY=10.5.5.1" description="Gateway IP address." /><property name="routes" variable="ADDRESS1, NETMASK1, GATEWAY1, METRIC1, OPTIONS1, ..." format="" values="" default="" example="" description="List of static routes. They are not stored in ifcfg-* file, but in route-* file instead." /><property name="ignore-auto-routes" variable="PEERROUTES(+)" format="" values="" default="yes" example="" description="PEERROUTES has the opposite meaning as 'ignore-auto-routes' property." /><property name="ignore-auto-dns" variable="PEERDNS" format="" values="" default="yes" example="" description="PEERDNS has the opposite meaning as 'ignore-auto-dns' property." /><property name="dhcp-send-hostname" variable="DHCP_SEND_HOSTNAME(+)" format="" values="" default="yes" example="" description="Whether DHCP_HOSTNAME should be sent to the DHCP server." /><property name="dhcp-hostname" variable="DHCP_HOSTNAME" format="" values="" default="" example="" description="Hostname to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used." /><property name="never-default" variable="DEFROUTE (GATEWAYDEV in /etc/sysconfig/network)" format="" values="" default="yes" example="" description="DEFROUTE=no tells NetworkManager that this connection should not be assigned the default route. DEFROUTE has the opposite meaning as 'never-default' property." /><property name="may-fail" variable="IPV4_FAILURE_FATAL(+)" format="" values="" default="no" example="" description="IPV4_FAILURE_FATAL has the opposite meaning as 'may-fail' property." /><property name="route-metric" variable="IPV4_ROUTE_METRIC(+)" format="" values="" default="-1" example="" description="IPV4_ROUTE_METRIC is the default IPv4 metric for routes on this connection. If set to -1, a default metric based on the device type is used." /><property name="route-table" variable="IPV4_ROUTE_TABLE(+)" format="" values="" default="0" example="" description="IPV4_ROUTE_TABLE enables policy-routing and sets the default routing table." /><property name="dns-options" variable="RES_OPTIONS(+)" format="" values="" default="" example="RES_OPTIONS=ndots:2 timeout:3" description="List of DNS options to be added to /etc/resolv.conf" /><property name="dns-priority" variable="IPV4_DNS_PRIORITY(+)" format="" values="" default="0" example="IPV4_DNS_PRIORITY=20" description="The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used." /><property name="dhcp-client-id" variable="DHCP_CLIENT_ID(+)" format="" values="" default="" example="DHCP_CLIENT_ID=ax-srv-1; DHCP_CLIENT_ID=01:44:44:44:44:44:44" description="A string sent to the DHCP server to identify the local machine. A binary value can be specified using hex notation ('aa:bb:cc')." /><property name="dad-timeout" variable="ACD_TIMEOUT(+), ARPING_WAIT" format="" values="" default="missing variable means global default (config override or zero)" example="ACD_TIMEOUT=2000 or ARPING_WAIT=2" description="Timeout (in milliseconds for ACD_TIMEOUT or in seconds for ARPING_WAIT) for address conflict detection before configuring IPv4 addresses. 0 turns off the ACD completely, -1 means default value." /><property name="dhcp-timeout" variable="IPV4_DHCP_TIMEOUT(+)" format="" values="" default="" example="IPV4_DHCP_TIMEOUT=10" description="A timeout after which the DHCP transaction fails in case of no response." /><property name="dhcp-fqdn" variable="DHCP_FQDN" format="" values="" default="" example="DHCP_FQDN=foo.bar.com" description="FQDN to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used." /><property name="dhcp-vendor-class-identifier" variable="DHCP_VENDOR_CLASS_IDENTIFIER(+)" format="" values="" default="" example="DHCP_VENDOR_CLASS_IDENTIFIER=foo" description="The Vendor Class Identifier DHCP option (60)." /><property name="link-local" variable="IPV4_LINK_LOCAL(+)" format="" values="" default="" example="IPV4_LINK_LOCAL=auto" description="Configure link-local IP address in interaction with method" /></setting><setting name="ipv6"> +<property name="method" variable="IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C, IPV6_DISABLED" format="" values="" default="IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no" example="" description="Method used for IPv6 protocol configuration. ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes; disabled ~ IPV6_DISABLED=yes" /><property name="dns" variable="DNS1, DNS2, ..." format="string" values="" default="" example="" description="List of DNS servers. NetworkManager uses the variables both for IPv4 and IPv6." /><property name="dns-search" variable="IPV6_DOMAIN(+)" format="string (space-separated domains)" values="" default="" example="" description="List of DNS search domains." /><property name="addresses" variable="IPV6ADDR, IPV6ADDR_SECONDARIES" format="" values="" default="" example="IPV6ADDR=ab12:9876::1 IPV6ADDR_SECONDARIES="ab12:9876::2 ab12:9876::3"" description="List of static IP addresses." /><property name="gateway" variable="IPV6_DEFAULTGW" format="" values="" default="" example="IPV6_DEFAULTGW=abbe::1" description="Gateway IP address." /><property name="routes" variable="(none)" format="" values="" default="" example="" description="List of static routes. They are not stored in ifcfg-* file, but in route6-* file instead in the form of command line for 'ip route add'." /><property name="ignore-auto-routes" variable="IPV6_PEERROUTES(+)" format="" values="" default="yes" example="" description="IPV6_PEERROUTES has the opposite meaning as 'ignore-auto-routes' property." /><property name="ignore-auto-dns" variable="IPV6_PEERDNS(+)" format="" values="" default="yes" example="" description="IPV6_PEERDNS has the opposite meaning as 'ignore-auto-dns' property." /><property name="dhcp-hostname" variable="DHCPV6_HOSTNAME" format="" values="" default="" example="" description="Hostname to send the DHCP server." /><property name="dhcp-timeout" variable="IPV6_DHCP_TIMEOUT(+)" format="" values="" default="" example="IPV6_DHCP_TIMEOUT=10" description="A timeout after which the DHCP transaction fails in case of no response." /><property name="dhcp-hostname-flags" variable="DHCPV6_HOSTNAME_FLAGS" format="" values="" default="" example="DHCPV6_HOSTNAME_FLAGS=5" description="flags for the DHCP hostname property" /><property name="never-default" variable="IPV6_DEFROUTE(+), (and IPV6_DEFAULTGW, IPV6_DEFAULTDEV in /etc/sysconfig/network)" format="" values="" default="IPV6_DEFROUTE=yes (when no variable specified)" example="" description="IPV6_DEFROUTE=no tells NetworkManager that this connection should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite meaning as 'never-default' property." /><property name="may-fail" variable="IPV6_FAILURE_FATAL(+)" format="" values="" default="no" example="" description="IPV6_FAILURE_FATAL has the opposite meaning as 'may-fail' property." /><property name="route-metric" variable="IPV6_ROUTE_METRIC(+)" format="" values="" default="-1" example="" description="IPV6_ROUTE_METRIC is the default IPv6 metric for routes on this connection. If set to -1, a default metric based on the device type is used." /><property name="route-table" variable="IPV6_ROUTE_TABLE(+)" format="" values="" default="0" example="" description="IPV6_ROUTE_TABLE enables policy-routing and sets the default routing table." /><property name="dns-priority" variable="IPV6_DNS_PRIORITY(+)" format="" values="" default="0" example="IPV6_DNS_PRIORITY=20" description="The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used." /><property name="dns-options" variable="IPV6_RES_OPTIONS(+)" format="" values="" default="" example="IPV6_RES_OPTIONS=ndots:2 timeout:3" description="List of DNS options to be added to /etc/resolv.conf" /><property name="ip6-privacy" variable="IPV6_PRIVACY, IPV6_PRIVACY_PREFER_PUBLIC_IP(+)" format="" values="IPV6_PRIVACY: no, yes (rfc3041 or rfc4941); IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no" default="no" example="IPV6_PRIVACY=rfc3041 IPV6_PRIVACY_PREFER_PUBLIC_IP=yes" description="Configure IPv6 Privacy Extensions for SLAAC (RFC4941)." /><property name="addr-gen-mode" variable="IPV6_ADDR_GEN_MODE" format="" values="IPV6_ADDR_GEN_MODE: default, default-or-eui64, eui64, stable-privacy" default=""default-or-eui64"" example="IPV6_ADDR_GEN_MODE=stable-privacy" description="Configure IPv6 Stable Privacy addressing for SLAAC (RFC7217)." /><property name="token" variable="IPV6_TOKEN" format="" values="" default="" example="IPV6_TOKEN=::53" description="The IPv6 tokenized interface identifier token" /><property name="dhcp-timeout" variable="IPV6_RA_TIMEOUT(+)" format="" values="" default="" example="IPV6_RA_TIMEOUT=10" description="A timeout for waiting Router Advertisements in seconds." /><property name="dhcp-duid" variable="DHCPV6_DUID(+)" format="" values="" default="" example="DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DUID=03:01:de:ad:be:ef:00:01" description="A string sent to the DHCPv6 server to identify the local machine. Apart from the special values "lease", "stable-llt", "stable-ll", "stable-uuid", "llt" and "ll" a binary value in hex format is expected. An hex string where each octet is separated by a colon is also accepted." /></setting><setting name="macsec"> </setting><setting name="macvlan"> </setting><setting name="match"> <property name="path" variable="MATCH_PATH" format="" values="" default="" example="MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"" description="space-separated list of paths to match against the udev property ID_PATHS of devices" /></setting><setting name="802-11-olpc-mesh"> |