diff options
Diffstat (limited to 'libnm/nm-property-docs.xml')
| -rw-r--r-- | libnm/nm-property-docs.xml | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/libnm/nm-property-docs.xml b/libnm/nm-property-docs.xml index 31bceefb..6344f784 100644 --- a/libnm/nm-property-docs.xml +++ b/libnm/nm-property-docs.xml @@ -22,7 +22,7 @@ <property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." /> <property name="secondaries" name_upper="SECONDARIES" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." /> <property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave." /> - <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection." /> + <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection." /> <property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." /> <property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc)." /> <property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid. It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network. For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-")." /> @@ -387,6 +387,11 @@ <property name="tos" name_upper="TOS" type="uint32" default="0" description="Specifies the TOS value to use in outgoing packets." /> <property name="ttl" name_upper="TTL" type="uint32" default="0" description="Specifies the time-to-live value to use in outgoing packets." /> </setting> + <setting name="wifi-p2p" description="Wi-Fi P2P Settings" name_upper="WIFI_P2P" > + <property name="peer" name_upper="PEER" type="string" description="The P2P device that should be connected to. Currently this is the only way to create or join a group." /> + <property name="wfd-ies" name_upper="WFD_IES" type="byte array" description="The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client." /> + <property name="wps-method" name_upper="WPS_METHOD" type="uint32" default="0" description="Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use." /> + </setting> <setting name="wimax" description="WiMax Settings" name_upper="WIMAX" > <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1" /> <property name="network-name" name_upper="NETWORK_NAME" type="string" description="Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1" /> @@ -407,6 +412,14 @@ <property name="wake-on-lan" name_upper="WAKE_ON_LAN" type="uint32" default="1" description="The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." /> <property name="wake-on-lan-password" name_upper="WAKE_ON_LAN_PASSWORD" type="string" description="If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address. If NULL, no password will be required." /> </setting> + <setting name="wireguard" description="WireGuard Ethernet Settings" name_upper="WIREGUARD" > + <property name="fwmark" name_upper="FWMARK" type="uint32" default="0" description="The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets." /> + <property name="listen-port" name_upper="LISTEN_PORT" type="uint32" default="0" description="The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up." /> + <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation." /> + <property name="peer-routes" name_upper="PEER_ROUTES" type="boolean" default="TRUE" description="Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively." /> + <property name="private-key" name_upper="PRIVATE_KEY" type="string" description="The 256 bit private-key in base64 encoding." /> + <property name="private-key-flags" name_upper="PRIVATE_KEY_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the "private-key" property." /> + </setting> <setting name="802-11-wireless" description="Wi-Fi Settings" name_upper="WIRELESS" > <property name="band" name_upper="BAND" type="string" description="802.11 frequency band of the network. One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11. This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible. This setting depends on specific driver capability and may not work with all drivers." /> <property name="bssid" name_upper="BSSID" type="byte array" description="If specified, directs the device to only associate with the given access point. This capability is highly driver dependent and not supported by all devices. Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future." /> @@ -430,14 +443,14 @@ <property name="auth-alg" name_upper="AUTH_ALG" type="string" description="When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here. One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified." /> <property name="fils" name_upper="FILS" type="int32" default="0" description="Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled." /> <property name="group" name_upper="GROUP" type="array of string" default="[]" description="A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp"." /> - <property name="key-mgmt" name_upper="KEY_MGMT" type="string" description="Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security." /> + <property name="key-mgmt" name_upper="KEY_MGMT" type="string" description="Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security." /> <property name="leap-password" name_upper="LEAP_PASSWORD" type="string" description="The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap")." /> <property name="leap-password-flags" name_upper="LEAP_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the "leap-password" property." /> <property name="leap-username" name_upper="LEAP_USERNAME" type="string" description="The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap")." /> <property name="pairwise" name_upper="PAIRWISE" type="array of string" default="[]" description="A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp"." /> <property name="pmf" name_upper="PMF" type="int32" default="0" description="Indicates whether Protected Management Frames (802.11w) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled." /> <property name="proto" name_upper="PROTO" type="array of string" default="[]" description="List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed." /> - <property name="psk" name_upper="PSK" type="string" description="Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network." /> + <property name="psk" name_upper="PSK" type="string" description="Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication." /> <property name="psk-flags" name_upper="PSK_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the "psk" property." /> <property name="wep-key-flags" name_upper="WEP_KEY_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties." /> <property name="wep-key-type" name_upper="WEP_KEY_TYPE" type="NMWepKeyType (uint32)" description="Controls the interpretation of WEP keys. Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key." /> |