diff options
Diffstat (limited to 'examples')
44 files changed, 3341 insertions, 116 deletions
diff --git a/examples/C/Makefile.in b/examples/C/Makefile.in index 3b154702..77e47215 100644 --- a/examples/C/Makefile.in +++ b/examples/C/Makefile.in @@ -207,7 +207,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -219,8 +218,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -230,6 +227,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -284,16 +282,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -330,6 +325,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -358,7 +355,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -373,6 +369,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -433,6 +431,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -440,6 +439,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ diff --git a/examples/C/glib/Makefile.am b/examples/C/glib/Makefile.am index 4b03d87f..3e442c30 100644 --- a/examples/C/glib/Makefile.am +++ b/examples/C/glib/Makefile.am @@ -1,6 +1,6 @@ AM_CPPFLAGS = \ - -I${top_srcdir}/include \ - -I$(top_builddir)/include \ + -I${top_srcdir}/shared \ + -I$(top_builddir)/shared \ -I${top_srcdir}/libnm-core \ -I${top_builddir}/libnm-core \ -I${top_srcdir}/libnm \ diff --git a/examples/C/glib/Makefile.in b/examples/C/glib/Makefile.in index f4caa8a9..c755d178 100644 --- a/examples/C/glib/Makefile.in +++ b/examples/C/glib/Makefile.in @@ -245,7 +245,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -257,8 +256,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -268,6 +265,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -322,16 +320,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -368,6 +363,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -396,7 +393,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -411,6 +407,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -471,6 +469,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -478,6 +477,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -494,8 +494,8 @@ with_netconfig = @with_netconfig@ with_resolvconf = @with_resolvconf@ with_valgrind = @with_valgrind@ AM_CPPFLAGS = \ - -I${top_srcdir}/include \ - -I$(top_builddir)/include \ + -I${top_srcdir}/shared \ + -I$(top_builddir)/shared \ -I${top_srcdir}/libnm-core \ -I${top_builddir}/libnm-core \ -I${top_srcdir}/libnm \ diff --git a/examples/C/qt/Makefile.in b/examples/C/qt/Makefile.in index 997aca76..04634ccf 100644 --- a/examples/C/qt/Makefile.in +++ b/examples/C/qt/Makefile.in @@ -217,7 +217,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -229,8 +228,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -240,6 +237,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -294,16 +292,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -340,6 +335,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -368,7 +365,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -383,6 +379,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -443,6 +441,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -450,6 +449,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ diff --git a/examples/Makefile.am b/examples/Makefile.am index a227f0ea..3521b4ce 100644 --- a/examples/Makefile.am +++ b/examples/Makefile.am @@ -2,5 +2,6 @@ SUBDIRS= \ shell \ python \ ruby \ + lua \ C \ dispatcher diff --git a/examples/Makefile.in b/examples/Makefile.in index cc227072..352ddb15 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -206,7 +206,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -218,8 +217,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -229,6 +226,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -283,16 +281,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -329,6 +324,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -357,7 +354,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -372,6 +368,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -432,6 +430,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -439,6 +438,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -458,6 +458,7 @@ SUBDIRS = \ shell \ python \ ruby \ + lua \ C \ dispatcher diff --git a/examples/dispatcher/10-ifcfg-rh-routes.sh b/examples/dispatcher/10-ifcfg-rh-routes.sh index 75b8c5e5..59e44db5 100755 --- a/examples/dispatcher/10-ifcfg-rh-routes.sh +++ b/examples/dispatcher/10-ifcfg-rh-routes.sh @@ -8,6 +8,9 @@ # This should be installed in both dispatcher.d/ and # dispatcher.d/pre-up.d/ +# pre-up scripts delay activation of the device. To reduce the delay, +# it is adviced to install the script as symlink to no-wait.d directory. + if [ "$2" != "pre-up" -a "$2" != "down" ]; then exit 0 fi diff --git a/examples/dispatcher/Makefile.in b/examples/dispatcher/Makefile.in index b04b3e50..c28c3dd1 100644 --- a/examples/dispatcher/Makefile.in +++ b/examples/dispatcher/Makefile.in @@ -146,7 +146,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -158,8 +157,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -169,6 +166,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -223,16 +221,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -269,6 +264,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -297,7 +294,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -312,6 +308,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -372,6 +370,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -379,6 +378,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ diff --git a/examples/lua/Makefile.am b/examples/lua/Makefile.am new file mode 100644 index 00000000..bf14f682 --- /dev/null +++ b/examples/lua/Makefile.am @@ -0,0 +1,2 @@ +SUBDIRS= lgi + diff --git a/examples/lua/Makefile.in b/examples/lua/Makefile.in new file mode 100644 index 00000000..625155ed --- /dev/null +++ b/examples/lua/Makefile.in @@ -0,0 +1,772 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = examples/lua +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_readline.m4 \ + $(top_srcdir)/m4/compiler_warnings.m4 \ + $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gnome-code-coverage.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intltool.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/vapigen.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +ALL_LINGUAS = @ALL_LINGUAS@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_TESTS_FD_REDIRECT = @AM_TESTS_FD_REDIRECT@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BLUEZ5_CFLAGS = @BLUEZ5_CFLAGS@ +BLUEZ5_LIBS = @BLUEZ5_LIBS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DBUS_SYS_DIR = @DBUS_SYS_DIR@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DHCLIENT_PATH = @DHCLIENT_PATH@ +DHCPCD_PATH = @DHCPCD_PATH@ +DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ +DLLTOOL = @DLLTOOL@ +DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ +GLIB_LIBS = @GLIB_LIBS@ +GLIB_MAKEFILE = @GLIB_MAKEFILE@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GUDEV_CFLAGS = @GUDEV_CFLAGS@ +GUDEV_LIBS = @GUDEV_LIBS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ +INTLTOOL_MERGE = @INTLTOOL_MERGE@ +INTLTOOL_PERL = @INTLTOOL_PERL@ +INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ +INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ +INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ +INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ +INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +IPTABLES_PATH = @IPTABLES_PATH@ +KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ +LIBDL = @LIBDL@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBM = @LIBM@ +LIBNDP_CFLAGS = @LIBNDP_CFLAGS@ +LIBNDP_LIBS = @LIBNDP_LIBS@ +LIBNL_CFLAGS = @LIBNL_CFLAGS@ +LIBNL_LIBS = @LIBNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBSOUP_CFLAGS = @LIBSOUP_CFLAGS@ +LIBSOUP_LIBS = @LIBSOUP_LIBS@ +LIBTEAMDCTL_CFLAGS = @LIBTEAMDCTL_CFLAGS@ +LIBTEAMDCTL_LIBS = @LIBTEAMDCTL_LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LOG_DRIVER = @LOG_DRIVER@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MM_GLIB_CFLAGS = @MM_GLIB_CFLAGS@ +MM_GLIB_LIBS = @MM_GLIB_LIBS@ +MOC = @MOC@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NEWT_CFLAGS = @NEWT_CFLAGS@ +NEWT_LIBS = @NEWT_LIBS@ +NM = @NM@ +NMEDIT = @NMEDIT@ +NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ +NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ +NM_MICRO_VERSION = @NM_MICRO_VERSION@ +NM_MINOR_VERSION = @NM_MINOR_VERSION@ +NM_MODIFY_SYSTEM_POLICY = @NM_MODIFY_SYSTEM_POLICY@ +NM_VERSION = @NM_VERSION@ +NSS_CFLAGS = @NSS_CFLAGS@ +NSS_LIBS = @NSS_LIBS@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POLKIT_CFLAGS = @POLKIT_CFLAGS@ +POLKIT_LIBS = @POLKIT_LIBS@ +POSUB = @POSUB@ +PPPD_PATH = @PPPD_PATH@ +PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ +QT_CFLAGS = @QT_CFLAGS@ +QT_LIBS = @QT_LIBS@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +SED = @SED@ +SELINUX_CFLAGS = @SELINUX_CFLAGS@ +SELINUX_LIBS = @SELINUX_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ +SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ +SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ +SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ +SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ +SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ +SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ +UDEV_DIR = @UDEV_DIR@ +USE_NLS = @USE_NLS@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VALGRIND_RULES = @VALGRIND_RULES@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +intltool__v_merge_options_ = @intltool__v_merge_options_@ +intltool__v_merge_options_0 = @intltool__v_merge_options_0@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nmbinary = @nmbinary@ +nmconfdir = @nmconfdir@ +nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ +nmrundir = @nmrundir@ +nmstatedir = @nmstatedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +systemdsystemunitdir = @systemdsystemunitdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_dhclient = @with_dhclient@ +with_dhcpcd = @with_dhcpcd@ +with_netconfig = @with_netconfig@ +with_resolvconf = @with_resolvconf@ +with_valgrind = @with_valgrind@ +SUBDIRS = lgi +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/lua/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu examples/lua/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic clean-libtool cscopelist-am ctags \ + ctags-am distclean distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/examples/lua/lgi/Makefile.am b/examples/lua/lgi/Makefile.am new file mode 100644 index 00000000..ce5c8f5c --- /dev/null +++ b/examples/lua/lgi/Makefile.am @@ -0,0 +1,9 @@ +EXTRA_DIST = \ + add-connection.lua \ + list-connections.lua \ + list-devices.lua \ + show-wifi-networks.lua \ + get-basic-nm-info.lua \ + get-ips.lua \ + change-vpn-username.lua \ + deactivate-all.lua diff --git a/examples/lua/lgi/Makefile.in b/examples/lua/lgi/Makefile.in new file mode 100644 index 00000000..3025d55b --- /dev/null +++ b/examples/lua/lgi/Makefile.in @@ -0,0 +1,601 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = examples/lua/lgi +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_readline.m4 \ + $(top_srcdir)/m4/compiler_warnings.m4 \ + $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gnome-code-coverage.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intltool.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/vapigen.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ALL_LINGUAS = @ALL_LINGUAS@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_TESTS_FD_REDIRECT = @AM_TESTS_FD_REDIRECT@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BLUEZ5_CFLAGS = @BLUEZ5_CFLAGS@ +BLUEZ5_LIBS = @BLUEZ5_LIBS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DBUS_SYS_DIR = @DBUS_SYS_DIR@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DHCLIENT_PATH = @DHCLIENT_PATH@ +DHCPCD_PATH = @DHCPCD_PATH@ +DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ +DLLTOOL = @DLLTOOL@ +DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ +GLIB_LIBS = @GLIB_LIBS@ +GLIB_MAKEFILE = @GLIB_MAKEFILE@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GUDEV_CFLAGS = @GUDEV_CFLAGS@ +GUDEV_LIBS = @GUDEV_LIBS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ +INTLTOOL_MERGE = @INTLTOOL_MERGE@ +INTLTOOL_PERL = @INTLTOOL_PERL@ +INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ +INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ +INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ +INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ +INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +IPTABLES_PATH = @IPTABLES_PATH@ +KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ +LIBDL = @LIBDL@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBM = @LIBM@ +LIBNDP_CFLAGS = @LIBNDP_CFLAGS@ +LIBNDP_LIBS = @LIBNDP_LIBS@ +LIBNL_CFLAGS = @LIBNL_CFLAGS@ +LIBNL_LIBS = @LIBNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBSOUP_CFLAGS = @LIBSOUP_CFLAGS@ +LIBSOUP_LIBS = @LIBSOUP_LIBS@ +LIBTEAMDCTL_CFLAGS = @LIBTEAMDCTL_CFLAGS@ +LIBTEAMDCTL_LIBS = @LIBTEAMDCTL_LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LOG_DRIVER = @LOG_DRIVER@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MM_GLIB_CFLAGS = @MM_GLIB_CFLAGS@ +MM_GLIB_LIBS = @MM_GLIB_LIBS@ +MOC = @MOC@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NEWT_CFLAGS = @NEWT_CFLAGS@ +NEWT_LIBS = @NEWT_LIBS@ +NM = @NM@ +NMEDIT = @NMEDIT@ +NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ +NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ +NM_MICRO_VERSION = @NM_MICRO_VERSION@ +NM_MINOR_VERSION = @NM_MINOR_VERSION@ +NM_MODIFY_SYSTEM_POLICY = @NM_MODIFY_SYSTEM_POLICY@ +NM_VERSION = @NM_VERSION@ +NSS_CFLAGS = @NSS_CFLAGS@ +NSS_LIBS = @NSS_LIBS@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POLKIT_CFLAGS = @POLKIT_CFLAGS@ +POLKIT_LIBS = @POLKIT_LIBS@ +POSUB = @POSUB@ +PPPD_PATH = @PPPD_PATH@ +PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ +QT_CFLAGS = @QT_CFLAGS@ +QT_LIBS = @QT_LIBS@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +SED = @SED@ +SELINUX_CFLAGS = @SELINUX_CFLAGS@ +SELINUX_LIBS = @SELINUX_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ +SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ +SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ +SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ +SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ +SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ +SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ +UDEV_DIR = @UDEV_DIR@ +USE_NLS = @USE_NLS@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VALGRIND_RULES = @VALGRIND_RULES@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +intltool__v_merge_options_ = @intltool__v_merge_options_@ +intltool__v_merge_options_0 = @intltool__v_merge_options_0@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nmbinary = @nmbinary@ +nmconfdir = @nmconfdir@ +nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ +nmrundir = @nmrundir@ +nmstatedir = @nmstatedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +systemdsystemunitdir = @systemdsystemunitdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_dhclient = @with_dhclient@ +with_dhcpcd = @with_dhcpcd@ +with_netconfig = @with_netconfig@ +with_resolvconf = @with_resolvconf@ +with_valgrind = @with_valgrind@ +EXTRA_DIST = \ + add-connection.lua \ + list-connections.lua \ + list-devices.lua \ + show-wifi-networks.lua \ + get-basic-nm-info.lua \ + get-ips.lua \ + change-vpn-username.lua \ + deactivate-all.lua + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/lua/lgi/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu examples/lua/lgi/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/examples/lua/lgi/add-connection.lua b/examples/lua/lgi/add-connection.lua new file mode 100755 index 00000000..3daf5f32 --- /dev/null +++ b/examples/lua/lgi/add-connection.lua @@ -0,0 +1,98 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- Adding an Ethernet connection to NetworkManager in Lua. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local GLib = lgi.GLib +local NM = lgi.NM + +function uuid() + math.randomseed(os.time()) + local template ='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx' + local uuid = string.gsub(template, '[xy]', function (c) + local v = (c == 'x') and math.random(0, 0xf) or math.random(8, 0xb) + return string.format('%x', v) + end) + return uuid +end + +-- function creating NMConnection +function create_profile(name) + profile = NM.SimpleConnection.new() + + s_con = NM.SettingConnection.new() + s_wired = NM.SettingWired.new() + s_con[NM.SETTING_CONNECTION_ID] = name + s_con[NM.SETTING_CONNECTION_UUID] = uuid() + s_con[NM.SETTING_CONNECTION_TYPE] = "802-3-ethernet" + + profile:add_setting(s_con) + profile:add_setting(s_wired) + + -- show the connection + -- profile:dump() + return profile +end + +-- callback function for add_connection_async() +function added_cb(client, result, data) + local con,err,code = client:add_connection_finish(result) + if con then + print("The connection profile has been succesfully added to NetworkManager:") + print(con:get_id(), con:get_uuid()) + else + print(string.format("Error: (%d) %s", code, err)) + end + main_loop:quit() -- exit now +end + + +--------------------------- +-- Main code starts here -- +--------------------------- +-- parse command-line arguments +local name, persist = ... +if (not name or (persist and not string.find("persistent", persist, 1))) then + print(string.format("Usage: %s <connection name> [persistent]", arg[0]:gsub(".*/",""))) + os.exit(1) +end + +-- create GLib main loop +main_loop = GLib.MainLoop(nil, false) + +-- create Client object +local client = NM.Client.new() + +-- create a connection profile +local con = create_profile(name) + +-- send the connection to NetworkManager +client:add_connection_async(con, persist, nil, added_cb, nil) + +-- run main loop so that the callback could be called +main_loop:run() + diff --git a/examples/lua/lgi/change-vpn-username.lua b/examples/lua/lgi/change-vpn-username.lua new file mode 100755 index 00000000..2e93f9dd --- /dev/null +++ b/examples/lua/lgi/change-vpn-username.lua @@ -0,0 +1,85 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- This example changes username in a VPN profile. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local NM = lgi.NM + +-- mapping from VPN type to username data item +vpn2username = { + openvpn = "username", + vpnc = "Xauth username", + pptp = "user", + l2tp = "user", + openswan = "leftxauthusername", +} + +--------------------------- +-- Main code starts here -- +--------------------------- +-- parse command-line arguments +local profile, username, extra = ... +if (not profile or not username or extra) then + print(string.format("Usage: %s <vpn_profile> <username>", arg[0]:gsub(".*/",""))) + os.exit(1) +end + +-- get client object +client = NM.Client.new() + +-- find the connection profile +con = client:get_connection_by_id(profile) +if not con then con = client:get_connection_by_uuid(profile) end +if not con then con = client:get_connection_by_path(profile) end +if not con then io.stderr:write(string.format("Profile %s not found.\n", profile)) os.exit(1) end + +if not con:is_type(NM.SETTING_VPN_SETTING_NAME) then + io.stderr:write(string.format("Profile '%s' is not a VPN.\n", profile)) + os.exit(1) +end + +-- get VPN setting +vpn = con:get_setting_vpn() +service_name = vpn:get_service_type() +vpn_type = service_name:match(".*%.(.*)") + +if not vpn2username[vpn_type] then + io.stderr:write(string.format("Unknown VPN type '%s'.\n", vpn_type)) + os.exit(1) +end + +-- update the username +vpn:add_data_item(vpn2username[vpn_type], username) +-- save changes +ok, errmsg = con:commit_changes(true) +if not ok then + io.stderr:write(string.format("Error in updating connection: %s.\n", errmsg)) + os.exit(1) +end + +print(string.format("Username updated to '%s'.", username)) + diff --git a/examples/lua/lgi/deactivate-all.lua b/examples/lua/lgi/deactivate-all.lua new file mode 100755 index 00000000..fb8e0ed5 --- /dev/null +++ b/examples/lua/lgi/deactivate-all.lua @@ -0,0 +1,82 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- Deactivate all active connections (of certain type). +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local NM = lgi.NM + +-- suported connection types +connection_types = { + NM.SETTING_VPN_SETTING_NAME, + NM.SETTING_WIRELESS_SETTING_NAME, + NM.SETTING_WIRED_SETTING_NAME, + NM.SETTING_BOND_SETTING_NAME, + NM.SETTING_BRIDGE_SETTING_NAME, + NM.SETTING_TEAM_SETTING_NAME, + NM.SETTING_INFINIBAND_SETTING_NAME, + NM.SETTING_PPPOE_SETTING_NAME, + NM.SETTING_ADSL_SETTING_NAME, + NM.SETTING_BLUETOOTH_SETTING_NAME, + NM.SETTING_WIMAX_SETTING_NAME, + NM.SETTING_OLPC_MESH_SETTING_NAME, + NM.SETTING_GENERIC_SETTING_NAME, +} + +function known_ctype(ctype, types) + for _,v in ipairs(types) do + if v == ctype then return true end + end + return false +end + +--------------------------- +-- Main code starts here -- +--------------------------- +-- parse command-line arguments +local ctype = ... +if (ctype and not known_ctype(ctype, connection_types)) then + print(string.format("Usage: %s [<type>]", arg[0]:gsub(".*/",""))) + print("Allowed types:", table.concat(connection_types, ", ")) + os.exit(1) +end + +-- create Client object +local client = NM.Client.new() + +-- get active connections +connections = client:get_active_connections() + +-- deactivate the connections +for _, ac in pairs(connections) do + if not ctype or ctype == ac:get_connection_type() then + io.stdout:write(string.format("Deactivating %s (%s)", ac:get_id(), ac:get_uuid())) + ok,err = client:deactivate_connection(ac, nil, nil) + if ok then io.stdout:write("\27[32m -> succeeded\27[0m\n") + else io.stdout:write(string.format("\27[31m -> failed\27[0m (%s)\n", err)) end + end +end + diff --git a/examples/lua/lgi/get-basic-nm-info.lua b/examples/lua/lgi/get-basic-nm-info.lua new file mode 100755 index 00000000..fe3c3ea3 --- /dev/null +++ b/examples/lua/lgi/get-basic-nm-info.lua @@ -0,0 +1,51 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- This example gets basic information about NetworkManager. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local NM = lgi.NM + +--------------------------- +-- Main code starts here -- +--------------------------- +-- get client object +client = NM.Client.new() + +print("Basic NM properties:") +print("====================") +print("NM version: ", client.version) +print("NM state: ", client.state) +print("NM startup: ", client.startup) +print("Networking enabled: ", client.networking_enabled) +print("Wireless enabled: ", client.wireless_enabled) +print("Wireless HW enabled: ", client.wireless_hardware_enabled) +print("WWAN enabled: ", client.wwan_enabled) +print("WWAN HW enabled: ", client.wwan_hardware_enabled) +print("# devices: ", #client.devices) +print("# connections: ", #client.connections) +print("# active connections:", #client.active_connections) + diff --git a/examples/lua/lgi/get-ips.lua b/examples/lua/lgi/get-ips.lua new file mode 100755 index 00000000..9a70de43 --- /dev/null +++ b/examples/lua/lgi/get-ips.lua @@ -0,0 +1,160 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- This example shows how to get addresses, routes and DNS information from +-- NMIP4Config and NMIP6Config (got out of NMDevice) +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local NM = lgi.NM + +AF_INET = 2 +AF_INET6 = 10 + +function to_str(table) + local val = "" + for i, str in ipairs(table) do + local delim = i == #table and "" or ", " + val = val .. str .. delim + end + return val +end + +function show_addresses(dev, family) + if (family == AF_INET) then ip_cfg = dev:get_ip4_config() + else ip_cfg = dev:get_ip6_config() end + + if not ip_cfg then print("None") return end + local nm_addresses = ip_cfg:get_addresses() + if #nm_addresses == 0 then print("None") return end + + for _, nm_address in ipairs(nm_addresses) do + addr = nm_address:get_address() + prefix = nm_address:get_prefix() + print(string.format("%s/%d", addr, prefix)) + end +end + +function show_gateway(dev, family) + if (family == AF_INET) then ip_cfg = dev:get_ip4_config() + else ip_cfg = dev:get_ip6_config() end + + if not ip_cfg then print("None") return end + gw = ip_cfg:get_gateway() + print(gw) +end + +function show_routes(dev, family) + if (family == AF_INET) then ip_cfg = dev:get_ip4_config() + else ip_cfg = dev:get_ip6_config() end + + if not ip_cfg then print("None") return end + local nm_routes = ip_cfg:get_routes() + if #nm_routes == 0 then print("None") return end + + for _, nm_route in ipairs(nm_routes) do + dest = nm_route:get_dest() + prefix = nm_route:get_prefix() + next_hop = nm_route:get_next_hop() + metric = nm_route:get_metric() + print(string.format("%s/%d %s %d", dest, prefix, next_hop, metric)) + end +end + +function show_dns(dev, family) + if (family == AF_INET) then ip_cfg = dev:get_ip4_config() + else ip_cfg = dev:get_ip6_config() end + + if not ip_cfg then print("None") return end + + print ("Nameservers:", to_str(ip_cfg:get_nameservers())) + print ("Domains: ", to_str(ip_cfg:get_domains())) + print ("Searches: ", to_str(ip_cfg:get_searches())) + if (family == AF_INET) then + print ("WINS: ", to_str(ip_cfg:get_wins_servers())) + end +end + + +--------------------------- +-- Main code starts here -- +--------------------------- +if not arg[1] or arg[2] then + io.stderr:write(string.format("Usage: %s <interface>\n", arg[0])) + os.exit(1) +end +local dev_iface = arg[1] + +local c = NM.Client.new() +local device = c:get_device_by_iface(dev_iface) +if not device then + io.stderr:write(string.format("Device '%s' not found\n", dev_iface)) + os.exit(1) +end + +local header = string.format("Device: %s - %s", dev_iface, device:get_device_type()) +print(header) +print(string.rep("=", #header)) + +print("IPv4 addresses:") +print("---------------") +show_addresses(device, AF_INET) +print("") + +print("IPv4 gateway:") +print("-------------") +show_gateway(device, AF_INET) +print("") + +print("IPv4 routes:") +print("------------") +show_routes(device, AF_INET) +print("") + +print "IPv6 addresses:" +print("---------------") +show_addresses(device, AF_INET6) +print("") + +print("IPv6 gateway:") +print("-------------") +show_gateway(device, AF_INET6) +print("") + +print "IPv6 routes:" +print("------------") +show_routes(device, AF_INET6) +print("") + +print "IPv4 DNS:" +print("---------") +show_dns(device, AF_INET) +print("") + +print "IPv6 DNS:" +print("---------") +show_dns(device, AF_INET6) +print("") + diff --git a/examples/lua/lgi/list-connections.lua b/examples/lua/lgi/list-connections.lua new file mode 100755 index 00000000..f2eda442 --- /dev/null +++ b/examples/lua/lgi/list-connections.lua @@ -0,0 +1,63 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- Getting and printing all NetworkManager connection in Lua. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local GLib = lgi.GLib +local NM = lgi.NM + +function print_values(setting, key, value, flags, data) + print(string.format(" %s.%s: %s", setting:get_name(), key, value and tostring(value.value) or "nil")) +end + + +--------------------------- +-- Main code starts here -- +--------------------------- +-- parse command-line arguments +local details = ... +if (details and not string.find("details", details, 1)) then + print(string.format("Usage: %s [details]", arg[0]:gsub(".*/",""))) + os.exit(1) +end + +-- create Client object +local client = NM.Client.new() + +-- get connections +connections = client:get_connections() + +-- print the connections' details +print(string.format("There are %s connection profiles.", #connections)) +for i, c in pairs(connections) do + print(string.format("=== %s | %25s | %s ", c:get_uuid(), c:get_id(), c:get_path())) + if details then + c:for_each_setting_value(print_values, nil) + print("\n") + end +end + diff --git a/examples/lua/lgi/list-devices.lua b/examples/lua/lgi/list-devices.lua new file mode 100755 index 00000000..712d353e --- /dev/null +++ b/examples/lua/lgi/list-devices.lua @@ -0,0 +1,51 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- Getting basic information about network interfaces known to NetworkManager. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local GLib = lgi.GLib +local NM = lgi.NM + +--------------------------- +-- Main code starts here -- +--------------------------- +-- create Client object +local client = NM.Client.new() + +-- get all devices +devices = client:get_devices() + +-- print device details +for i, d in ipairs(devices) do +print("============================") + print(string.format("Interface: %s", d[NM.DEVICE_INTERFACE])) + print(string.format("MAC: %s", d:get_hw_address())) + print(string.format("Type: %s", d:get_device_type())) + print(string.format("Driver: %s", d:get_driver())) + print(string.format("State: %s", d:get_state())) +end + diff --git a/examples/lua/lgi/show-wifi-networks.lua b/examples/lua/lgi/show-wifi-networks.lua new file mode 100755 index 00000000..954fee70 --- /dev/null +++ b/examples/lua/lgi/show-wifi-networks.lua @@ -0,0 +1,122 @@ +#!/usr/bin/env lua +-- -*- Mode: Lua; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- +-- vim: ft=lua ts=2 sts=2 sw=2 et ai +-- +-- This program is free software; you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation; either version 2 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License along +-- with this program; if not, write to the Free Software Foundation, Inc., +-- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +-- +-- Copyright 2015 Red Hat, Inc. +-- +-- +-- This example lists Wi-Fi access points NetworkManager scanned on Wi-Fi devices. +-- The example uses libnm library using GObject introspection via Lua lgi module. +-- Most distribution ship the module as lua-lgi package. +-- libnm guide: https://developer.gnome.org/libnm/1.0/ +-- Lua-lgi guide: https://github.com/pavouk/lgi/blob/master/docs/guide.md +-- + +local lgi = require 'lgi' +local NM = lgi.NM + +function is_empty(t) + local next = next + if next(t) then return false else return true end +end + +function ssid_to_utf8(ap) + local ssid = ap:get_ssid() + if not ssid then return "" end + return NM.utils_ssid_to_utf8(ssid:get_data()) +end + +function print_device_info(device) + local active_ap = device:get_active_access_point() + if active_ap then ssid = ssid_to_utf8(active_ap) end + local info = string.format("Device: %s | Driver: %s | Active AP: %s", + device:get_iface(), device:get_driver(), ssid) + print(info) + print(string.rep("=", info:len())) +end + +function flags_to_string(flags) + local str = "" + for flag, _ in pairs(flags) do + str = str .. " " .. flag + end + if str == "" then str = "NONE" end + return (str:gsub( "^%s", "")) +end + +function flags_to_security(flags, wpa_flags, rsn_flags) + local str = "" + if flags["PRIVACY"] and is_empty(wpa_flags) and is_empty(rsn_flags) then + str = str .. " WEP" + end + if not is_empty(wpa_flags) then + str = str .. " WPA1" + end + if not is_empty(rsn_flags) then + str = str .. " WPA2" + end + if wpa_flags["KEY_MGMT_802_1X"] or rsn_flags["KEY_MGMT_802_1X"] then + str = str .. " 802.1X" + end + return (str:gsub( "^%s", "")) +end + +function print_ap_info(ap) + local strength = ap:get_strength() + local frequency = ap:get_frequency() + local flags = ap:get_flags() + local wpa_flags = ap:get_wpa_flags() + local rsn_flags = ap:get_rsn_flags() + -- remove extra NONE from the flags tables + flags["NONE"] = nil + wpa_flags["NONE"] = nil + rsn_flags["NONE"] = nil + print("SSID: ", ssid_to_utf8(ap)) + print("BSSID: ", ap:get_bssid()) + print("Frequency: ", frequency) + print("Channel: ", NM.utils_wifi_freq_to_channel(frequency)) + print("Mode: ", ap:get_mode()) + print("Flags: ", flags_to_string(flags)) + print("WPA flags: ", flags_to_string(wpa_flags)) + print("RSN flags: ", flags_to_string(rsn_flags)) + print("Security: ", flags_to_security(flags, wpa_flags, rsn_flags)) + print(string.format("Strength: %s %s%%", NM.utils_wifi_strength_bars(strength), strength)) + print("") +end + + +--------------------------- +-- Main code starts here -- +--------------------------- +-- Call setlocale() else NM.utils_wifi_strength_bars() will think the locale +-- is ASCII-only, and return the fallback characters rather than the unicode bars +os.setlocale('') + +-- get all devices +client = NM.Client.new() +devs = client:get_devices() + +-- print APs for all Wi-Fi devices +for _, dev in ipairs(devs) do + if dev:get_device_type() == "WIFI" then + print_device_info(dev) + for _, ap in ipairs(dev:get_access_points()) do + print_ap_info(ap) + end + end +end + diff --git a/examples/python/Makefile.am b/examples/python/Makefile.am index 3b6a41f4..cd3ce3ed 100644 --- a/examples/python/Makefile.am +++ b/examples/python/Makefile.am @@ -1,2 +1,2 @@ -SUBDIRS= dbus gi +SUBDIRS= dbus gi python-networkmanager diff --git a/examples/python/Makefile.in b/examples/python/Makefile.in index c047d1a1..e5552ae8 100644 --- a/examples/python/Makefile.in +++ b/examples/python/Makefile.in @@ -206,7 +206,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -218,8 +217,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -229,6 +226,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -283,16 +281,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -329,6 +324,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -357,7 +354,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -372,6 +368,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -432,6 +430,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -439,6 +438,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -454,7 +454,7 @@ with_dhcpcd = @with_dhcpcd@ with_netconfig = @with_netconfig@ with_resolvconf = @with_resolvconf@ with_valgrind = @with_valgrind@ -SUBDIRS = dbus gi +SUBDIRS = dbus gi python-networkmanager all: all-recursive .SUFFIXES: diff --git a/examples/python/dbus/Makefile.am b/examples/python/dbus/Makefile.am index dd77f1e9..0a89dc56 100644 --- a/examples/python/dbus/Makefile.am +++ b/examples/python/dbus/Makefile.am @@ -2,7 +2,8 @@ EXTRA_DIST = \ nm-state.py \ add-connection.py \ add-connection-compat.py \ - add-system-wifi-connection.py \ + add-wifi-eap-connection.py \ + add-wifi-psk-connection.py \ vpn.py \ update-secrets.py \ list-connections.py \ @@ -11,4 +12,7 @@ EXTRA_DIST = \ get-active-connection-uuids.py \ list-devices.py \ update-ip4-method.py \ - is-wwan-default.py + is-wwan-default.py \ + wifi-hotspot.py \ + create-bond.py \ + wifi-active-ap.py diff --git a/examples/python/dbus/Makefile.in b/examples/python/dbus/Makefile.in index 023e52d8..1fcfd9cd 100644 --- a/examples/python/dbus/Makefile.in +++ b/examples/python/dbus/Makefile.in @@ -146,7 +146,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -158,8 +157,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -169,6 +166,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -223,16 +221,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -269,6 +264,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -297,7 +294,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -312,6 +308,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -372,6 +370,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -379,6 +378,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -398,7 +398,8 @@ EXTRA_DIST = \ nm-state.py \ add-connection.py \ add-connection-compat.py \ - add-system-wifi-connection.py \ + add-wifi-eap-connection.py \ + add-wifi-psk-connection.py \ vpn.py \ update-secrets.py \ list-connections.py \ @@ -407,7 +408,10 @@ EXTRA_DIST = \ get-active-connection-uuids.py \ list-devices.py \ update-ip4-method.py \ - is-wwan-default.py + is-wwan-default.py \ + wifi-hotspot.py \ + create-bond.py \ + wifi-active-ap.py all: all-am diff --git a/examples/python/dbus/add-system-wifi-connection.py b/examples/python/dbus/add-wifi-eap-connection.py index ff390821..4085ac31 100755 --- a/examples/python/dbus/add-system-wifi-connection.py +++ b/examples/python/dbus/add-wifi-eap-connection.py @@ -17,14 +17,14 @@ # Copyright (C) 2011 Red Hat, Inc. # -import dbus +import dbus, uuid def path_to_value(path): return dbus.ByteArray("file://" + path + "\0") s_con = dbus.Dictionary({ 'type': '802-11-wireless', - 'uuid': '7371bb78-c1f7-42a3-a9db-5b9566e8ca07', + 'uuid': str(uuid.uuid4()), 'id': 'My Wifi'}) s_wifi = dbus.Dictionary({ diff --git a/examples/python/dbus/add-wifi-psk-connection.py b/examples/python/dbus/add-wifi-psk-connection.py new file mode 100755 index 00000000..60cb2af9 --- /dev/null +++ b/examples/python/dbus/add-wifi-psk-connection.py @@ -0,0 +1,56 @@ +#!/usr/bin/env python +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Copyright (C) 2015 Red Hat, Inc. +# + +import dbus, uuid + +s_con = dbus.Dictionary({ + 'type': '802-11-wireless', + 'uuid': str(uuid.uuid4()), + 'id': 'My-WPA-PSK'}) + +s_wifi = dbus.Dictionary({ + 'ssid': dbus.ByteArray("best-wifi"), + 'mode': 'infrastructure', +}) + +s_wsec = dbus.Dictionary({ + 'key-mgmt': 'wpa-psk', + 'auth-alg': 'open', + 'psk': 'super-secret-password', +}) + +s_ip4 = dbus.Dictionary({'method': 'auto'}) +s_ip6 = dbus.Dictionary({'method': 'ignore'}) + +con = dbus.Dictionary({ + 'connection': s_con, + '802-11-wireless': s_wifi, + '802-11-wireless-security': s_wsec, + 'ipv4': s_ip4, + 'ipv6': s_ip6 + }) + + +bus = dbus.SystemBus() + +proxy = bus.get_object("org.freedesktop.NetworkManager", "/org/freedesktop/NetworkManager/Settings") +settings = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Settings") + +settings.AddConnection(con) + diff --git a/examples/python/dbus/create-bond.py b/examples/python/dbus/create-bond.py new file mode 100755 index 00000000..41ffabe8 --- /dev/null +++ b/examples/python/dbus/create-bond.py @@ -0,0 +1,114 @@ +#!/usr/bin/env python +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Copyright (C) 2015 Red Hat, Inc. +# + +# +# This example configures a Bond from ethernet devices and activates it +# +# NetworkManager D-Bus API: +# https://developer.gnome.org/NetworkManager/1.0/spec.html +# + +import dbus, sys, uuid +from dbus.mainloop.glib import DBusGMainLoop +import gobject + +DBusGMainLoop(set_as_default=True) + +def add_connection(con): + bus = dbus.SystemBus() + proxy = bus.get_object("org.freedesktop.NetworkManager", "/org/freedesktop/NetworkManager/Settings") + settings = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Settings") + return settings.AddConnection(con) + +def create_bond(bond_name): + bond_opts = dbus.Dictionary({'mode': '4'}) + s_bond = dbus.Dictionary({'options': bond_opts}) + s_con = dbus.Dictionary({ + 'type': 'bond', + 'uuid': str(uuid.uuid4()), + 'id': bond_name, + 'interface-name': bond_name, + 'autoconnect': False, + 'autoconnect-slaves': 1}) + s_ip4 = dbus.Dictionary({'method': 'auto'}) + s_ip6 = dbus.Dictionary({'method': 'ignore'}) + + con = dbus.Dictionary({ + 'bond': s_bond, + 'connection': s_con, + 'ipv4': s_ip4, + 'ipv6': s_ip6}) + print "Creating bond connection: %s" % bond_name + return add_connection(con) + +def create_slave(device, master): + slave_name = 'bond-' + master + '-slave-' + device + s_wired = dbus.Dictionary({'duplex': 'full'}) + s_con = dbus.Dictionary({ + 'type': '802-3-ethernet', + 'uuid': str(uuid.uuid4()), + 'id': slave_name, + 'interface-name': device, + 'autoconnect': False, + 'master': master, + 'slave-type': 'bond'}) + + con = dbus.Dictionary({ + '802-3-ethernet': s_wired, + 'connection': s_con}) + print "Creating slave connection: %s" % slave_name + add_connection(con) + +def usage(): + print "Usage: %s <bond_name> <ifname1> ..." % sys.argv[0] + sys.exit(0) + + +if len(sys.argv) < 3: + usage() + +# Create bond master and slave connections +bond_name = sys.argv[1] +bond_path = create_bond(bond_name) +for ifname in sys.argv[2:]: + create_slave(ifname, bond_name) + +# Activate the bond +bus = dbus.SystemBus() +proxy = bus.get_object("org.freedesktop.NetworkManager", "/org/freedesktop/NetworkManager") +manager = dbus.Interface(proxy, "org.freedesktop.NetworkManager") +ac = manager.ActivateConnection(bond_path, "/", "/") +print "Activating bond: %s (%s)" % (bond_name, ac) + +# Monitor the active bond connection +loop = gobject.MainLoop() +def properties_changed(props): + if 'State' in props: + if props['State'] == 2: + print "Succesfully connected" + loop.quit() + if props['State'] == 3 or props['State'] == 4: + print "Bond activation failed" + loop.quit() + +obj = bus.get_object("org.freedesktop.NetworkManager", ac) +iface = dbus.Interface(obj, "org.freedesktop.NetworkManager.Connection.Active") +iface.connect_to_signal("PropertiesChanged", properties_changed) + +loop.run() diff --git a/examples/python/dbus/nm-state.py b/examples/python/dbus/nm-state.py index 94fa6309..176090f7 100755 --- a/examples/python/dbus/nm-state.py +++ b/examples/python/dbus/nm-state.py @@ -34,11 +34,29 @@ device_states = { 0: "Unknown", 110: "Deactivating", 120: "Failed" } +connectivity_states = { 0: "Unknown", + 1: "Activating", + 2: "Activated", + 3: "Deactivating", + 4: "Deactivated" } + +nm_state = { 0: "Unknown", + 10: "Asleep", + 20: "Disconnected", + 30: "Disconnecting", + 40: "Connecting", + 50: "Connected-Local", + 60: "Connected-Site", + 70: "Connected-Global" } + bus = dbus.SystemBus() proxy = bus.get_object("org.freedesktop.NetworkManager", "/org/freedesktop/NetworkManager") manager = dbus.Interface(proxy, "org.freedesktop.NetworkManager") +# Get overall NM connection state +print("NetworkManager state is: '%s'" % nm_state[manager.state()]) + # Get device-specific state devices = manager.GetDevices() for d in devices: @@ -73,9 +91,4 @@ for a in active: con_details = con_iface.GetSettings() con_name = con_details['connection']['id'] - if state == 2: # activated - print "Connection '%s' is activated" % con_name - else: - print "Connection '%s' is activating" % con_name - - + print "Connection '%s' is %s" % (con_name, connectivity_states[state].lower()) diff --git a/examples/python/dbus/vpn.py b/examples/python/dbus/vpn.py index 59773a61..d60e470e 100755 --- a/examples/python/dbus/vpn.py +++ b/examples/python/dbus/vpn.py @@ -102,11 +102,11 @@ def get_wifi_device_path(): def activate_connection(connection_path, device_path): def reply_handler(opath): - print "Success: device activating" + print "Success: device activating" sys.exit(0) def error_handler(*args): - print "Error activating device: %s" % args + sys.stderr.write("Error activating device: %s\n" % args) sys.exit(1) bus = dbus.SystemBus() diff --git a/examples/python/dbus/wifi-active-ap.py b/examples/python/dbus/wifi-active-ap.py new file mode 100755 index 00000000..3b17c6f1 --- /dev/null +++ b/examples/python/dbus/wifi-active-ap.py @@ -0,0 +1,66 @@ +#!/usr/bin/env python +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Copyright (C) 2015 Red Hat, Inc. +# + +# +# This example starts or stops a wifi hotspot +# +# Configuration settings are described at +# https://developer.gnome.org/NetworkManager/1.0/ref-settings.html +# + +import dbus, sys, time + +bus = dbus.SystemBus() +service_name = "org.freedesktop.NetworkManager" +proxy = bus.get_object(service_name, "/org/freedesktop/NetworkManager/Settings") +settings = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Settings") + +if len(sys.argv) != 2: + print "Usage: %s <ifname>" % sys.argv[0] + sys.exit(0) + +# Get the device object path based on interface name +iface = sys.argv[1] +proxy = bus.get_object(service_name, "/org/freedesktop/NetworkManager") +nm = dbus.Interface(proxy, "org.freedesktop.NetworkManager") +devpath = nm.GetDeviceByIpIface(iface) + +# Get a proxy to the wifi device and get the active access point's object path +proxy = bus.get_object(service_name, devpath) +props = dbus.Interface(proxy, "org.freedesktop.DBus.Properties") +active_ap_path = props.Get("org.freedesktop.NetworkManager.Device.Wireless", "ActiveAccessPoint") +if active_ap_path == "/": + print "%s is not currently associated" % sys.argv[1] + sys.exit(0) + +# Get the active access point's SSID and BSSID +ap_proxy = bus.get_object(service_name, active_ap_path) +ap_props = dbus.Interface(ap_proxy, "org.freedesktop.DBus.Properties") +raw_ssid = ap_props.Get("org.freedesktop.NetworkManager.AccessPoint", "Ssid") +bssid = ap_props.Get("org.freedesktop.NetworkManager.AccessPoint", "HwAddress") + +# Convert the SSID from a byte array to a string, assuming ASCII encoding +ssid = "" +for c in raw_ssid: + ssid = ssid + chr(c) + +print "%s is associated to '%s' (%s)" % (sys.argv[1], ssid, bssid) + +sys.exit(0) + diff --git a/examples/python/dbus/wifi-hotspot.py b/examples/python/dbus/wifi-hotspot.py new file mode 100755 index 00000000..10958af8 --- /dev/null +++ b/examples/python/dbus/wifi-hotspot.py @@ -0,0 +1,112 @@ +#!/usr/bin/env python +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Copyright (C) 2010 - 2012 Red Hat, Inc. +# + +# +# This example starts or stops a wifi hotspot +# +# Configuration settings are described at +# https://developer.gnome.org/NetworkManager/1.0/ref-settings.html +# + +import dbus, sys, time + +our_uuid = '2b0d0f1d-b79d-43af-bde1-71744625642e' + +s_con = dbus.Dictionary({ + 'type': '802-11-wireless', + 'uuid': our_uuid, + 'id': 'Test Hotspot'}) + +s_wifi = dbus.Dictionary({ + 'ssid': dbus.ByteArray("My Hotspot"), + 'mode': "ap", + 'band': "bg", + 'channel': dbus.UInt32(1)}) + +s_wsec = dbus.Dictionary({ + 'key-mgmt': 'wpa-psk', + 'psk': 'great password'}) + +s_ip4 = dbus.Dictionary({'method': 'shared'}) +s_ip6 = dbus.Dictionary({'method': 'ignore'}) + +con = dbus.Dictionary({ + 'connection': s_con, + '802-11-wireless': s_wifi, + '802-11-wireless-security': s_wsec, + 'ipv4': s_ip4, + 'ipv6': s_ip6 + }) + +def usage(): + print "Usage: %s <ifname> [up|down]" % sys.argv[0] + sys.exit(0) + +bus = dbus.SystemBus() +service_name = "org.freedesktop.NetworkManager" +proxy = bus.get_object(service_name, "/org/freedesktop/NetworkManager/Settings") +settings = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Settings") + +if len(sys.argv) != 3: + usage() + +iface = sys.argv[1] +proxy = bus.get_object(service_name, "/org/freedesktop/NetworkManager") +nm = dbus.Interface(proxy, "org.freedesktop.NetworkManager") +devpath = nm.GetDeviceByIpIface(iface) + +# Find our existing hotspot connection +connection_path = None +for path in settings.ListConnections(): + proxy = bus.get_object(service_name, path) + settings_connection = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Settings.Connection") + config = settings_connection.GetSettings() + if config['connection']['uuid'] == our_uuid: + connection_path = path + break + +# If the hotspot connection didn't already exist, add it +if not connection_path: + connection_path = settings.AddConnection(con) + +# Now start or stop the hotspot on the requested device +proxy = bus.get_object(service_name, devpath) +device = dbus.Interface(proxy, "org.freedesktop.NetworkManager.Device") +operation = sys.argv[2] +if operation == "up": + acpath = nm.ActivateConnection(connection_path, devpath, "/") + proxy = bus.get_object(service_name, acpath) + active_props = dbus.Interface(proxy, "org.freedesktop.DBus.Properties") + + # Wait for the hotspot to start up + start = time.time() + while time.time() < start + 10: + state = active_props.Get("org.freedesktop.NetworkManager.Connection.Active", "State") + if state == 2: # NM_ACTIVE_CONNECTION_STATE_ACTIVATED + print "Access point started" + sys.exit(0) + time.sleep(1) + print "Failed to start access point" +elif operation == "down": + device.Disconnect() +else: + usage() + +sys.exit(0) + diff --git a/examples/python/gi/Makefile.am b/examples/python/gi/Makefile.am index dcf2dff0..9c69407f 100644 --- a/examples/python/gi/Makefile.am +++ b/examples/python/gi/Makefile.am @@ -6,4 +6,6 @@ EXTRA_DIST = \ get_ips.py \ add_connection.py \ get-active-connections.py \ - update-ip4-method.py + update-ip4-method.py \ + deactivate-all.py \ + README diff --git a/examples/python/gi/Makefile.in b/examples/python/gi/Makefile.in index 21384364..972092ad 100644 --- a/examples/python/gi/Makefile.in +++ b/examples/python/gi/Makefile.in @@ -129,7 +129,7 @@ am__can_run_installinfo = \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in +am__DIST_COMMON = $(srcdir)/Makefile.in README DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALL_LINGUAS = @ALL_LINGUAS@ @@ -146,7 +146,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -158,8 +157,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -169,6 +166,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -223,16 +221,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -269,6 +264,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -297,7 +294,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -312,6 +308,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -372,6 +370,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -379,6 +378,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ @@ -402,7 +402,9 @@ EXTRA_DIST = \ get_ips.py \ add_connection.py \ get-active-connections.py \ - update-ip4-method.py + update-ip4-method.py \ + deactivate-all.py \ + README all: all-am diff --git a/examples/python/gi/README b/examples/python/gi/README new file mode 100644 index 00000000..d7773329 --- /dev/null +++ b/examples/python/gi/README @@ -0,0 +1,2 @@ +These examples show how to call libnm from Python using +GObject introspection. diff --git a/examples/python/gi/add_connection.py b/examples/python/gi/add_connection.py index 492d66d1..cfb40a9a 100755 --- a/examples/python/gi/add_connection.py +++ b/examples/python/gi/add_connection.py @@ -71,7 +71,7 @@ def added_cb(client, result, data): client.add_connection_finish(result) print("The connection profile has been succesfully added to NetworkManager.") except Exception, e: - print("Error: %s" % e) + sys.stderr.write("Error: %s\n" % e) main_loop.quit() if __name__ == "__main__": diff --git a/examples/python/gi/deactivate-all.py b/examples/python/gi/deactivate-all.py new file mode 100755 index 00000000..59842ac2 --- /dev/null +++ b/examples/python/gi/deactivate-all.py @@ -0,0 +1,83 @@ +#!/usr/bin/env python +# -*- Mode: Python; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- +# vim: ft=python ts=4 sts=4 sw=4 et ai + +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +# +# Copyright 2015 Red Hat, Inc. +# + +# +# This example deactivates all active connections (of certain type). +# It makes use of libnm via GObject introspection. +# +# Links: +# https://developer.gnome.org/libnm/1.0/ +# https://wiki.gnome.org/GObjectIntrospection +# https://wiki.gnome.org/PyGObject +# + +import sys +import gi +gi.require_version('NM', '1.0') +from gi.repository import NM + +# suported connection types +connection_types = { + NM.SETTING_VPN_SETTING_NAME, + NM.SETTING_WIRELESS_SETTING_NAME, + NM.SETTING_WIRED_SETTING_NAME, + NM.SETTING_BOND_SETTING_NAME, + NM.SETTING_BRIDGE_SETTING_NAME, + NM.SETTING_TEAM_SETTING_NAME, + NM.SETTING_INFINIBAND_SETTING_NAME, + NM.SETTING_PPPOE_SETTING_NAME, + NM.SETTING_ADSL_SETTING_NAME, + NM.SETTING_BLUETOOTH_SETTING_NAME, + NM.SETTING_WIMAX_SETTING_NAME, + NM.SETTING_OLPC_MESH_SETTING_NAME, + NM.SETTING_GENERIC_SETTING_NAME, +} + + +if __name__ == "__main__": + if len(sys.argv) == 1: + ctype = None + else: + allowed_types = ", ".join(connection_types) + if len(sys.argv) == 2: + ctype = sys.argv[1] + if ctype not in connection_types: + sys.exit('Usage: %s [<type>]\nAllowed types: %s' % (sys.argv[0], allowed_types)) + else: + sys.exit('Usage: %s [<type>]\nAllowed types: %s' % (sys.argv[0], allowed_types)) + + # create Client object + client = NM.Client.new(None) + + # get all active connections + connections = client.get_active_connections() + + # deactivate the connections + for ac in connections: + if ctype == None or ctype == ac.get_connection_type(): + sys.stdout.write("Deactivating %s (%s)" % (ac.get_id(), ac.get_uuid())) + try: + client.deactivate_connection(ac, None) + sys.stdout.write("\033[32m -> succeeded\033[0m\n") + except Exception, e: + sys.stderr.write("\033[31m -> failed\033[0m (%s)\n" % e.message) + diff --git a/examples/python/gi/firewall-zone.py b/examples/python/gi/firewall-zone.py index a56760ae..979f2acf 100755 --- a/examples/python/gi/firewall-zone.py +++ b/examples/python/gi/firewall-zone.py @@ -77,5 +77,5 @@ if __name__ == "__main__": print("'%s' zone set to '%s'") % (c.get_id(), new_zone) break if not found: - print ("Error: connection '%s' not found.") % (con_name) + sys.stderr.write("Error: connection '%s' not found.\n") % (con_name) main_loop.quit() diff --git a/examples/python/gi/show-wifi-networks.py b/examples/python/gi/show-wifi-networks.py index a8bfbbfe..db49b555 100755 --- a/examples/python/gi/show-wifi-networks.py +++ b/examples/python/gi/show-wifi-networks.py @@ -52,13 +52,77 @@ def print_device_info(device): print info print '=' * len(info) +def mode_to_string(mode): + if mode == getattr(NM, '80211Mode').INFRA: + return "INFRA" + if mode == getattr(NM, '80211Mode').ADHOC: + return "ADHOC" + if mode == getattr(NM, '80211Mode').AP: + return "AP" + return "UNKNOWN" + +def flags_to_string(flags): + if flags & getattr(NM, '80211ApFlags').PRIVACY: + return "PRIVACY" + return "NONE" + +def security_flags_to_string(flags): + NM_AP_FLAGS = getattr(NM, '80211ApSecurityFlags') + str = "" + if flags & NM_AP_FLAGS.PAIR_WEP40: + str = str + " PAIR_WEP40" + if flags & NM_AP_FLAGS.PAIR_WEP104: + str = str + " PAIR_WEP104" + if flags & NM_AP_FLAGS.PAIR_TKIP: + str = str + " PAIR_TKIP" + if flags & NM_AP_FLAGS.PAIR_CCMP: + str = str + " PAIR_CCMP" + if flags & NM_AP_FLAGS.GROUP_WEP40: + str = str + " GROUP_WEP40" + if flags & NM_AP_FLAGS.GROUP_WEP104: + str = str + " GROUP_WEP104" + if flags & NM_AP_FLAGS.GROUP_TKIP: + str = str + " GROUP_TKIP" + if flags & NM_AP_FLAGS.GROUP_CCMP: + str = str + " GROUP_CCMP" + if flags & NM_AP_FLAGS.KEY_MGMT_PSK: + str = str + " KEY_MGMT_PSK" + if flags & NM_AP_FLAGS.KEY_MGMT_802_1X: + str = str + " KEY_MGMT_802_1X" + if str: + return str.lstrip() + else: + return "NONE" + +def flags_to_security(flags, wpa_flags, rsn_flags): + str = "" + if ((flags & getattr(NM, '80211ApFlags').PRIVACY) and + (wpa_flags == 0) and (rsn_flags == 0)): + str = str + " WEP" + if wpa_flags != 0: + str = str + " WPA1" + if rsn_flags != 0: + str = str + " WPA2" + if ((wpa_flags & getattr(NM, '80211ApSecurityFlags').KEY_MGMT_802_1X) or + (rsn_flags & getattr(NM, '80211ApSecurityFlags').KEY_MGMT_802_1X)): + str = str + " 802.1X" + return str.lstrip() + def print_ap_info(ap): strength = ap.get_strength() frequency = ap.get_frequency() + flags = ap.get_flags() + wpa_flags = ap.get_wpa_flags() + rsn_flags = ap.get_rsn_flags() print "SSID: %s" % (ssid_to_utf8(ap)) print "BSSID: %s" % (ap.get_bssid()) print "Frequency: %s" % (frequency) print "Channel: %s" % (NM.utils_wifi_freq_to_channel(frequency)) + print "Mode: %s" % (mode_to_string(ap.get_mode())) + print "Flags: %s" % (flags_to_string(flags)) + print "WPA flags: %s" % (security_flags_to_string(wpa_flags)) + print "RSN flags: %s" % (security_flags_to_string(rsn_flags)) + print "Security: %s" % (flags_to_security(flags, wpa_flags, rsn_flags)) print "Strength: %s %s%%" % (NM.utils_wifi_strength_bars(strength), strength) print diff --git a/examples/python/gi/update-ip4-method.py b/examples/python/gi/update-ip4-method.py index 5e058031..12124599 100755 --- a/examples/python/gi/update-ip4-method.py +++ b/examples/python/gi/update-ip4-method.py @@ -82,6 +82,6 @@ if __name__ == "__main__": c.commit_changes(True, None) print("The connection profile has been updated.") except Exception, e: - print("Error: %s" % e) + sys.stderr.write("Error: %s\n" % e) break diff --git a/examples/python/python-networkmanager/Makefile.am b/examples/python/python-networkmanager/Makefile.am new file mode 100644 index 00000000..45fe750c --- /dev/null +++ b/examples/python/python-networkmanager/Makefile.am @@ -0,0 +1,2 @@ +EXTRA_DIST = \ + README diff --git a/examples/python/python-networkmanager/Makefile.in b/examples/python/python-networkmanager/Makefile.in new file mode 100644 index 00000000..43c752be --- /dev/null +++ b/examples/python/python-networkmanager/Makefile.in @@ -0,0 +1,594 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = examples/python/python-networkmanager +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_readline.m4 \ + $(top_srcdir)/m4/compiler_warnings.m4 \ + $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gnome-code-coverage.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intltool.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/vapigen.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in README +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ALL_LINGUAS = @ALL_LINGUAS@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AM_TESTS_FD_REDIRECT = @AM_TESTS_FD_REDIRECT@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BLUEZ5_CFLAGS = @BLUEZ5_CFLAGS@ +BLUEZ5_LIBS = @BLUEZ5_LIBS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DBUS_SYS_DIR = @DBUS_SYS_DIR@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DHCLIENT_PATH = @DHCLIENT_PATH@ +DHCPCD_PATH = @DHCPCD_PATH@ +DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ +DLLTOOL = @DLLTOOL@ +DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ +GLIB_LIBS = @GLIB_LIBS@ +GLIB_MAKEFILE = @GLIB_MAKEFILE@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GNUTLS_CFLAGS = @GNUTLS_CFLAGS@ +GNUTLS_LIBS = @GNUTLS_LIBS@ +GREP = @GREP@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GUDEV_CFLAGS = @GUDEV_CFLAGS@ +GUDEV_LIBS = @GUDEV_LIBS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ +INTLTOOL_MERGE = @INTLTOOL_MERGE@ +INTLTOOL_PERL = @INTLTOOL_PERL@ +INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ +INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ +INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ +INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ +INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +IPTABLES_PATH = @IPTABLES_PATH@ +KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ +LIBDL = @LIBDL@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBM = @LIBM@ +LIBNDP_CFLAGS = @LIBNDP_CFLAGS@ +LIBNDP_LIBS = @LIBNDP_LIBS@ +LIBNL_CFLAGS = @LIBNL_CFLAGS@ +LIBNL_LIBS = @LIBNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBSOUP_CFLAGS = @LIBSOUP_CFLAGS@ +LIBSOUP_LIBS = @LIBSOUP_LIBS@ +LIBTEAMDCTL_CFLAGS = @LIBTEAMDCTL_CFLAGS@ +LIBTEAMDCTL_LIBS = @LIBTEAMDCTL_LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LOG_DRIVER = @LOG_DRIVER@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MM_GLIB_CFLAGS = @MM_GLIB_CFLAGS@ +MM_GLIB_LIBS = @MM_GLIB_LIBS@ +MOC = @MOC@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NEWT_CFLAGS = @NEWT_CFLAGS@ +NEWT_LIBS = @NEWT_LIBS@ +NM = @NM@ +NMEDIT = @NMEDIT@ +NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ +NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ +NM_MICRO_VERSION = @NM_MICRO_VERSION@ +NM_MINOR_VERSION = @NM_MINOR_VERSION@ +NM_MODIFY_SYSTEM_POLICY = @NM_MODIFY_SYSTEM_POLICY@ +NM_VERSION = @NM_VERSION@ +NSS_CFLAGS = @NSS_CFLAGS@ +NSS_LIBS = @NSS_LIBS@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POLKIT_CFLAGS = @POLKIT_CFLAGS@ +POLKIT_LIBS = @POLKIT_LIBS@ +POSUB = @POSUB@ +PPPD_PATH = @PPPD_PATH@ +PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ +QT_CFLAGS = @QT_CFLAGS@ +QT_LIBS = @QT_LIBS@ +RANLIB = @RANLIB@ +READLINE_LIBS = @READLINE_LIBS@ +SED = @SED@ +SELINUX_CFLAGS = @SELINUX_CFLAGS@ +SELINUX_LIBS = @SELINUX_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ +SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ +SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ +SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ +SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ +SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ +SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ +UDEV_DIR = @UDEV_DIR@ +USE_NLS = @USE_NLS@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VALGRIND_RULES = @VALGRIND_RULES@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +intltool__v_merge_options_ = @intltool__v_merge_options_@ +intltool__v_merge_options_0 = @intltool__v_merge_options_0@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nmbinary = @nmbinary@ +nmconfdir = @nmconfdir@ +nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ +nmrundir = @nmrundir@ +nmstatedir = @nmstatedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +systemdsystemunitdir = @systemdsystemunitdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +with_dhclient = @with_dhclient@ +with_dhcpcd = @with_dhcpcd@ +with_netconfig = @with_netconfig@ +with_resolvconf = @with_resolvconf@ +with_valgrind = @with_valgrind@ +EXTRA_DIST = \ + README + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/python/python-networkmanager/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu examples/python/python-networkmanager/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/examples/python/python-networkmanager/README b/examples/python/python-networkmanager/README new file mode 100644 index 00000000..00805d82 --- /dev/null +++ b/examples/python/python-networkmanager/README @@ -0,0 +1,6 @@ +There is a client library in Python, named python-networkmanager. + +This library is developed outside of the core NetworkManager project. + +See https://github.com/seveas/python-networkmanager +and https://github.com/seveas/python-networkmanager/tree/master/examples diff --git a/examples/ruby/Makefile.in b/examples/ruby/Makefile.in index e314d036..aaa6818b 100644 --- a/examples/ruby/Makefile.in +++ b/examples/ruby/Makefile.in @@ -146,7 +146,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -158,8 +157,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -169,6 +166,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -223,16 +221,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -269,6 +264,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -297,7 +294,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -312,6 +308,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -372,6 +370,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -379,6 +378,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ diff --git a/examples/shell/Makefile.in b/examples/shell/Makefile.in index 223d68aa..dd9e966d 100644 --- a/examples/shell/Makefile.in +++ b/examples/shell/Makefile.in @@ -146,7 +146,6 @@ BLUEZ5_LIBS = @BLUEZ5_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ -CKDB_PATH = @CKDB_PATH@ CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ @@ -158,8 +157,6 @@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_GLIB_100_CFLAGS = @DBUS_GLIB_100_CFLAGS@ -DBUS_GLIB_100_LIBS = @DBUS_GLIB_100_LIBS@ DBUS_LIBS = @DBUS_LIBS@ DBUS_SYS_DIR = @DBUS_SYS_DIR@ DEFS = @DEFS@ @@ -169,6 +166,7 @@ DHCPCD_PATH = @DHCPCD_PATH@ DISTRO_NETWORK_SERVICE = @DISTRO_NETWORK_SERVICE@ DLLTOOL = @DLLTOOL@ DNSMASQ_PATH = @DNSMASQ_PATH@ +DNSSEC_TRIGGER_SCRIPT = @DNSSEC_TRIGGER_SCRIPT@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -223,16 +221,13 @@ INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ IPTABLES_PATH = @IPTABLES_PATH@ -IWMX_SDK_CFLAGS = @IWMX_SDK_CFLAGS@ -IWMX_SDK_LIBS = @IWMX_SDK_LIBS@ KERNEL_FIRMWARE_DIR = @KERNEL_FIRMWARE_DIR@ LCOV = @LCOV@ LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBAUDIT_CFLAGS = @LIBAUDIT_CFLAGS@ +LIBAUDIT_LIBS = @LIBAUDIT_LIBS@ LIBDL = @LIBDL@ -LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ -LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ -LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ @@ -269,6 +264,8 @@ NEWT_LIBS = @NEWT_LIBS@ NM = @NM@ NMEDIT = @NMEDIT@ NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT = @NM_CONFIG_DEFAULT_AUTH_POLKIT_TEXT@ +NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT = @NM_CONFIG_DEFAULT_LOGGING_AUDIT_TEXT@ +NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT = @NM_CONFIG_LOGGING_BACKEND_DEFAULT_TEXT@ NM_MAJOR_VERSION = @NM_MAJOR_VERSION@ NM_MICRO_VERSION = @NM_MICRO_VERSION@ NM_MINOR_VERSION = @NM_MINOR_VERSION@ @@ -297,7 +294,6 @@ POLKIT_LIBS = @POLKIT_LIBS@ POSUB = @POSUB@ PPPD_PATH = @PPPD_PATH@ PPPD_PLUGIN_DIR = @PPPD_PLUGIN_DIR@ -PPPOE_PATH = @PPPOE_PATH@ QT_CFLAGS = @QT_CFLAGS@ QT_LIBS = @QT_LIBS@ RANLIB = @RANLIB@ @@ -312,6 +308,8 @@ SYSTEMD_200_CFLAGS = @SYSTEMD_200_CFLAGS@ SYSTEMD_200_LIBS = @SYSTEMD_200_LIBS@ SYSTEMD_INHIBIT_CFLAGS = @SYSTEMD_INHIBIT_CFLAGS@ SYSTEMD_INHIBIT_LIBS = @SYSTEMD_INHIBIT_LIBS@ +SYSTEMD_JOURNAL_CFLAGS = @SYSTEMD_JOURNAL_CFLAGS@ +SYSTEMD_JOURNAL_LIBS = @SYSTEMD_JOURNAL_LIBS@ SYSTEMD_LOGIN_CFLAGS = @SYSTEMD_LOGIN_CFLAGS@ SYSTEMD_LOGIN_LIBS = @SYSTEMD_LOGIN_LIBS@ SYSTEM_CA_PATH = @SYSTEM_CA_PATH@ @@ -372,6 +370,7 @@ mkdir_p = @mkdir_p@ nmbinary = @nmbinary@ nmconfdir = @nmconfdir@ nmdatadir = @nmdatadir@ +nmlibdir = @nmlibdir@ nmrundir = @nmrundir@ nmstatedir = @nmstatedir@ oldincludedir = @oldincludedir@ @@ -379,6 +378,7 @@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ +runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ |