New upstream version 1.15.91

16 files changed, 323 insertions, 59 deletions

diff --git a/man/NetworkManager.8 b/man/NetworkManager.8
index 1992f827..a7abd444 100644
--- a/man/NetworkManager.8
+++ b/man/NetworkManager.8
@@ -2,12 +2,12 @@
 .\"     Title: NetworkManager
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Network management daemons
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NETWORKMANAGER" "8" "" "NetworkManager 1\&.15\&.2" "Network management daemons"
+.TH "NETWORKMANAGER" "8" "" "NetworkManager 1\&.15\&.91" "Network management daemons"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
diff --git a/man/NetworkManager.conf.5 b/man/NetworkManager.conf.5
index 54c912ec..19b9f1c5 100644
--- a/man/NetworkManager.conf.5
+++ b/man/NetworkManager.conf.5
@@ -2,12 +2,12 @@
 .\"     Title: NetworkManager.conf
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Configuration
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NETWORKMANAGER\&.CONF" "5" "" "NetworkManager 1\&.15\&.2" "Configuration"
+.TH "NETWORKMANAGER\&.CONF" "5" "" "NetworkManager 1\&.15\&.91" "Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -804,6 +804,10 @@ If left unspecified, the default value "optional" will be used\&.
 \fIwifi\&.wake\-on\-wlan\fR
 .RS 4
 .RE
+.PP
+\fIwireguard\&.mtu\fR
+.RS 4
+.RE
 
 .SS "Sections"
 .PP
@@ -962,6 +966,12 @@ for details\&.
 .PP
 This section controls NetworkManager\*(Aqs optional connectivity checking functionality\&. This allows NetworkManager to detect whether or not the system can actually access the internet or whether it is behind a captive portal\&.
 .PP
+Connectivity checking serves two purposes\&. For one, it exposes a connectivity state on D\-Bus, which other applications may use\&. For example, Gnome\*(Aqs portal helper uses this as signal to show a captive portal login page\&. The other use is that default\-route of devices without global connectivity get a penalty of +20000 to the route\-metric\&. This has the purpose to give a better default\-route to devices that have global connectivity\&. For example, when being connected to WWAN and to a Wi\-Fi network which is behind a captive portal, WWAN still gets preferred until login\&.
+.PP
+Note that your distribution might set
+/proc/sys/net/ipv4/conf/*/rp_filter
+to strict filtering\&. That works badly with per\-device connectivity checking, which uses SO_BINDDEVICE to send requests on all devices\&. A strict rp_filter setting will reject any response and the connectivity check on all but the best route will fail\&.
+.PP
 .PP
 \fIuri\fR
 .RS 4
@@ -977,7 +987,7 @@ Specified in seconds; controls how often connectivity is checked when a network
 .PP
 \fIresponse\fR
 .RS 4
-If set controls what body content NetworkManager checks for when requesting the URI for connectivity checking\&. If missing, defaults to "NetworkManager is online"
+If set, controls what body content NetworkManager checks for when requesting the URI for connectivity checking\&. Note that this only compares that the HTTP response starts with the specifid text, it does not compare the exact string\&. This behavior might change in the future, so avoid relying on it\&. If missing, the response defaults to "NetworkManager is online"\&. If set to empty, the HTTP server is expected to answer with status code 204 or send no data\&.
 .RE
 .SH "GLOBAL\-DNS SECTION"
 .PP
@@ -991,7 +1001,7 @@ A list of search domains to be used during hostname lookup\&.
 .PP
 \fIoptions\fR
 .RS 4
-A list of of options to be passed to the hostname resolver\&.
+A list of options to be passed to the hostname resolver\&.
 .RE
 .SH "GLOBAL\-DNS\-DOMAIN SECTIONS"
 .PP
diff --git a/man/NetworkManager.conf.xml b/man/NetworkManager.conf.xml
index e22aa20a..28934247 100644
--- a/man/NetworkManager.conf.xml
+++ b/man/NetworkManager.conf.xml
@@ -827,6 +827,9 @@ ipv6.ip6-privacy=0
         <varlistentry>
           <term><varname>wifi.wake-on-wlan</varname></term>
         </varlistentry>
+        <varlistentry>
+          <term><varname>wireguard.mtu</varname></term>
+        </varlistentry>
       </variablelist>
       <!-- The following comment is used by check-config-options.sh, don't remove it. -->
       <!-- end connection defaults -->
@@ -1056,11 +1059,28 @@ managed=1
 
   <refsect1>
     <title><literal>connectivity</literal> section</title>
+
     <para>This section controls NetworkManager's optional connectivity
     checking functionality.  This allows NetworkManager to detect
     whether or not the system can actually access the internet or
     whether it is behind a captive portal.</para>
 
+    <para>Connectivity checking serves two purposes. For one, it exposes
+    a connectivity state on D-Bus, which other applications may use. For example,
+    Gnome's portal helper uses this as signal to show a captive portal login
+    page.
+    The other use is that default-route of devices without global connectivity
+    get a penalty of +20000 to the route-metric. This has the purpose to give a
+    better default-route to devices that have global connectivity. For example,
+    when being connected to WWAN and to a Wi-Fi network which is behind a captive
+    portal, WWAN still gets preferred until login.</para>
+
+    <para>Note that your distribution might set <literal>/proc/sys/net/ipv4/conf/*/rp_filter</literal> to
+    strict filtering. That works badly with per-device connectivity checking,
+    which uses SO_BINDDEVICE to send requests on all devices. A strict rp_filter
+    setting will reject any response and the connectivity check on all but the
+    best route will fail.</para>
+
     <para>
       <variablelist>
         <varlistentry>
@@ -1084,10 +1104,15 @@ managed=1
         </varlistentry>
         <varlistentry>
           <term><varname>response</varname></term>
-          <listitem><para>If set controls what body content
+          <listitem><para>If set, controls what body content
           NetworkManager checks for when requesting the URI for
-          connectivity checking.  If missing, defaults to
-          "NetworkManager is online" </para></listitem>
+          connectivity checking.  Note that this only compares
+          that the HTTP response starts with the specifid text,
+          it does not compare the exact string. This behavior
+          might change in the future, so avoid relying on it.
+          If missing, the response defaults to "NetworkManager is online".
+          If set to empty, the HTTP server is expected to answer with
+          status code 204 or send no data.</para></listitem>
         </varlistentry>
       </variablelist>
     </para>
@@ -1111,7 +1136,7 @@ managed=1
           <term><varname>options</varname></term>
           <listitem>
             <para>
-             A list of of options to be passed to the hostname resolver.
+             A list of options to be passed to the hostname resolver.
            </para>
           </listitem>
         </varlistentry>
diff --git a/man/nm-initrd-generator.8 b/man/nm-initrd-generator.8
index 3df0447b..70d3ea03 100644
--- a/man/nm-initrd-generator.8
+++ b/man/nm-initrd-generator.8
@@ -2,12 +2,12 @@
 .\"     Title: nm-initrd-generator
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: System Administration
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-INITRD\-GENERATOR" "8" "" "NetworkManager 1\&.15\&.2" "System Administration"
+.TH "NM\-INITRD\-GENERATOR" "8" "" "NetworkManager 1\&.15\&.91" "System Administration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
diff --git a/man/nm-online.1 b/man/nm-online.1
index 0155f816..c6b4b7ca 100644
--- a/man/nm-online.1
+++ b/man/nm-online.1
@@ -2,12 +2,12 @@
 .\"     Title: nm-online
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: General Commands Manual
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-ONLINE" "1" "" "NetworkManager 1\&.15\&.2" "General Commands Manual"
+.TH "NM\-ONLINE" "1" "" "NetworkManager 1\&.15\&.91" "General Commands Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
diff --git a/man/nm-openvswitch.7 b/man/nm-openvswitch.7
index 87156e51..b8080648 100644
--- a/man/nm-openvswitch.7
+++ b/man/nm-openvswitch.7
@@ -2,12 +2,12 @@
 .\"     Title: nm-openvswitch
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Open vSwitch support overview
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-OPENVSWITCH" "7" "" "NetworkManager 1\&.15\&.2" "Open vSwitch support overview"
+.TH "NM\-OPENVSWITCH" "7" "" "NetworkManager 1\&.15\&.91" "Open vSwitch support overview"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
diff --git a/man/nm-settings-ifcfg-rh.5 b/man/nm-settings-ifcfg-rh.5
index d11336f1..5a4dfbe7 100644
--- a/man/nm-settings-ifcfg-rh.5
+++ b/man/nm-settings-ifcfg-rh.5
@@ -2,12 +2,12 @@
 .\"     Title: nm-settings-ifcfg-rh
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Configuration
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-SETTINGS\-IFCFG\-RH" "5" "" "NetworkManager 1\&.15\&.2" "Configuration"
+.TH "NM\-SETTINGS\-IFCFG\-RH" "5" "" "NetworkManager 1\&.15\&.91" "Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -2460,7 +2460,29 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&24.\ \&802\-3\-ethernet setting
+.B Table\ \&24.\ \&wifi\-p2p setting
+.TS
+allbox tab(:);
+lB lB lB lB.
+T{
+Property
+T}:T{
+Ifcfg\-rh Variable
+T}:T{
+Default
+T}:T{
+Description
+T}
+.T&
+.
+.TE
+.sp 1
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.B Table\ \&25.\ \&802\-3\-ethernet setting
 .TS
 allbox tab(:);
 lB lB lB lB.
@@ -2609,7 +2631,29 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&25.\ \&802\-11\-wireless\-security setting
+.B Table\ \&26.\ \&wireguard setting
+.TS
+allbox tab(:);
+lB lB lB lB.
+T{
+Property
+T}:T{
+Ifcfg\-rh Variable
+T}:T{
+Default
+T}:T{
+Description
+T}
+.T&
+.
+.TE
+.sp 1
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.B Table\ \&27.\ \&802\-11\-wireless\-security setting
 .TS
 allbox tab(:);
 lB lB lB lB.
@@ -2856,7 +2900,7 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&26.\ \&802\-11\-wireless setting
+.B Table\ \&28.\ \&802\-11\-wireless setting
 .TS
 allbox tab(:);
 lB lB lB lB.
@@ -3067,7 +3111,7 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&27.\ \&wpan setting
+.B Table\ \&29.\ \&wpan setting
 .TS
 allbox tab(:);
 lB lB lB lB.
diff --git a/man/nm-settings-ifcfg-rh.xml b/man/nm-settings-ifcfg-rh.xml
index ee867e12..6b99d9b5 100644
--- a/man/nm-settings-ifcfg-rh.xml
+++ b/man/nm-settings-ifcfg-rh.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
-<refentry id="nm-settings-ifcfg-rh"><refentryinfo><title>nm-settings-ifcfg-rh</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings-ifcfg-rh</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.2</refmiscinfo></refmeta><refnamediv><refname>nm-settings-ifcfg-rh</refname><refpurpose>Description of <emphasis>ifcfg-rh</emphasis> settings plugin</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
+<refentry id="nm-settings-ifcfg-rh"><refentryinfo><title>nm-settings-ifcfg-rh</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings-ifcfg-rh</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.91</refmiscinfo></refmeta><refnamediv><refname>nm-settings-ifcfg-rh</refname><refpurpose>Description of <emphasis>ifcfg-rh</emphasis> settings plugin</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
           NetworkManager is based on the concept of connection profiles that contain
           network configuration (see <citerefentry><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details). The profiles can be
           stored in various formats. NetworkManager uses plugins for reading and writing
@@ -364,7 +364,7 @@ Example: </emphasis>VLAN_INGRESS_PRIORITY_MAP=4:2,3:5</entry></row><row><entry a
 
 Example: </emphasis>VLAN_EGRESS_PRIORITY_MAP=5:4,4:1,3:7</entry></row><row><entry align="left">interface-name</entry><entry align="left">PHYSDEV and VLAN_ID, or DEVICE</entry><entry align="left"/><entry align="left">VLAN interface name. If all variables are set, parent device from PHYSDEV takes precedence over DEVICE, but VLAN id from DEVICE takes precedence over VLAN_ID.<emphasis role="bold">
 
-Example: </emphasis>PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12</entry></row></tbody></tgroup></table><table><title>802-3-ethernet setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody><row><entry align="left">port</entry><entry align="left">(none)</entry><entry align="left"/><entry align="left">The property is not saved by the plugin.</entry></row><row><entry align="left">speed</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Fixed speed for the ethernet link. It is added as "speed" parameter in the ETHTOOL_OPTS variable.</entry></row><row><entry align="left">duplex</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Fixed duplex mode for the ethernet link. It is added as "duplex" parameter in the ETHOOL_OPTS variable.</entry></row><row><entry align="left">auto-negotiate</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Whether link speed and duplex autonegotiation is enabled. It is not saved only if disabled and no values are provided for the "speed" and "duplex" parameters (skips link configuration).</entry></row><row><entry align="left">mac-address</entry><entry align="left">HWADDR</entry><entry align="left"/><entry align="left">Hardware address of the device in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:05). Note that for initscripts this is the current MAC address of the device as found during ifup. For NetworkManager this is the permanent MAC address. Or in case no permanent MAC address exists, the MAC address initially configured on the device.</entry></row><row><entry align="left">cloned-mac-address</entry><entry align="left">MACADDR</entry><entry align="left"/><entry align="left">Cloned (spoofed) MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:99).</entry></row><row><entry align="left">generate-mac-address-mask</entry><entry align="left">GENERATE_MAC_ADDRESS_MASK<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">the MAC address mask for generating randomized and stable cloned-mac-address.</entry></row><row><entry align="left">mac-address-blacklist</entry><entry align="left">HWADDR_BLACKLIST<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">It denies usage of the connection for any device whose address is listed.<emphasis role="bold">
+Example: </emphasis>PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12</entry></row></tbody></tgroup></table><table><title>wifi-p2p setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody/></tgroup></table><table><title>802-3-ethernet setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody><row><entry align="left">port</entry><entry align="left">(none)</entry><entry align="left"/><entry align="left">The property is not saved by the plugin.</entry></row><row><entry align="left">speed</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Fixed speed for the ethernet link. It is added as "speed" parameter in the ETHTOOL_OPTS variable.</entry></row><row><entry align="left">duplex</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Fixed duplex mode for the ethernet link. It is added as "duplex" parameter in the ETHOOL_OPTS variable.</entry></row><row><entry align="left">auto-negotiate</entry><entry align="left">ETHTOOL_OPTS</entry><entry align="left"/><entry align="left">Whether link speed and duplex autonegotiation is enabled. It is not saved only if disabled and no values are provided for the "speed" and "duplex" parameters (skips link configuration).</entry></row><row><entry align="left">mac-address</entry><entry align="left">HWADDR</entry><entry align="left"/><entry align="left">Hardware address of the device in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:05). Note that for initscripts this is the current MAC address of the device as found during ifup. For NetworkManager this is the permanent MAC address. Or in case no permanent MAC address exists, the MAC address initially configured on the device.</entry></row><row><entry align="left">cloned-mac-address</entry><entry align="left">MACADDR</entry><entry align="left"/><entry align="left">Cloned (spoofed) MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:99).</entry></row><row><entry align="left">generate-mac-address-mask</entry><entry align="left">GENERATE_MAC_ADDRESS_MASK<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">the MAC address mask for generating randomized and stable cloned-mac-address.</entry></row><row><entry align="left">mac-address-blacklist</entry><entry align="left">HWADDR_BLACKLIST<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">It denies usage of the connection for any device whose address is listed.<emphasis role="bold">
 
 Example: </emphasis>HWADDR_BLACKLIST="00:22:68:11:69:08 00:11:22:11:44:55"</entry></row><row><entry align="left">mtu</entry><entry align="left">MTU</entry><entry align="left"/><entry align="left">MTU of the interface.</entry></row><row><entry align="left">s390-subchannels</entry><entry align="left">SUBCHANNELS</entry><entry align="left"/><entry align="left">Subchannels for IBM S390 hosts.<emphasis role="bold">
 
@@ -372,7 +372,7 @@ Example: </emphasis>SUBCHANNELS=0.0.b00a,0.0.b00b,0.0.b00c</entry></row><row><en
 
 Example: </emphasis>NETTYPE=qeth<emphasis role="bold">
 
-Allowed values: </emphasis>"qeth", "lcs" or "ctc"</entry></row><row><entry align="left">s390-options</entry><entry align="left">OPTIONS and PORTNAME, CTCPROTO,</entry><entry align="left"/><entry align="left">S390 device options. All options go to OPTIONS, except for "portname" and "ctcprot" that have their own variables.</entry></row></tbody></tgroup></table><table><title>802-11-wireless-security setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody><row><entry align="left">key-mgmt</entry><entry align="left">KEY_MGMT<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">Key management menthod.<emphasis role="bold">
+Allowed values: </emphasis>"qeth", "lcs" or "ctc"</entry></row><row><entry align="left">s390-options</entry><entry align="left">OPTIONS and PORTNAME, CTCPROTO,</entry><entry align="left"/><entry align="left">S390 device options. All options go to OPTIONS, except for "portname" and "ctcprot" that have their own variables.</entry></row></tbody></tgroup></table><table><title>wireguard setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody/></tgroup></table><table><title>802-11-wireless-security setting</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Ifcfg-rh Variable</entry><entry>Default</entry><entry>Description</entry></row></thead><tbody><row><entry align="left">key-mgmt</entry><entry align="left">KEY_MGMT<emphasis>(+)</emphasis></entry><entry align="left"/><entry align="left">Key management menthod.<emphasis role="bold">
 
 Allowed values: </emphasis>IEEE8021X, WPA-PSK, WPA-EAP</entry></row><row><entry align="left">wep-tx-keyidx</entry><entry align="left">DEFAULTKEY</entry><entry align="left">1</entry><entry align="left">Index of active WEP key.<emphasis role="bold">
 
diff --git a/man/nm-settings-keyfile.5 b/man/nm-settings-keyfile.5
index c32fc672..9c852ae3 100644
--- a/man/nm-settings-keyfile.5
+++ b/man/nm-settings-keyfile.5
@@ -2,12 +2,12 @@
 .\"     Title: nm-settings-keyfile
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Configuration
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-SETTINGS\-KEYFILE" "5" "" "NetworkManager 1\&.15\&.2" "Configuration"
+.TH "NM\-SETTINGS\-KEYFILE" "5" "" "NetworkManager 1\&.15\&.91" "Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -513,7 +513,38 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&7.\ \&802\-3\-ethernet setting (section)
+.B Table\ \&7.\ \&wifi\-p2p setting (section)
+.TS
+allbox tab(:);
+lB lB lB lB.
+T{
+Property
+T}:T{
+Keyfile Variable
+T}:T{
+Format
+T}:T{
+Description
+T}
+.T&
+l l l l.
+T{
+peer
+T}:T{
+peer
+T}:T{
+usual hex\-digits\-and\-colons notation
+T}:T{
+MAC address in traditional hex\-digits\-and\-colons notation (e\&.g\&. 00:22:68:12:79:A2), or semicolon separated list of 6 bytes (obsolete) (e\&.g\&. 0;34;104;18;121;162)\&.
+T}
+.TE
+.sp 1
+.sp
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.B Table\ \&8.\ \&802\-3\-ethernet setting (section)
 .TS
 allbox tab(:);
 lB lB lB lB.
@@ -566,7 +597,7 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&8.\ \&802\-11\-wireless setting (section)
+.B Table\ \&9.\ \&802\-11\-wireless setting (section)
 .TS
 allbox tab(:);
 lB lB lB lB.
@@ -631,7 +662,7 @@ T}
 .nr an-no-space-flag 1
 .nr an-break-flag 1
 .br
-.B Table\ \&9.\ \&wpan setting (section)
+.B Table\ \&10.\ \&wpan setting (section)
 .TS
 allbox tab(:);
 lB lB lB lB.
diff --git a/man/nm-settings-keyfile.xml b/man/nm-settings-keyfile.xml
index 68ae20e4..f9faf802 100644
--- a/man/nm-settings-keyfile.xml
+++ b/man/nm-settings-keyfile.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
-<refentry id="nm-settings-keyfile"><refentryinfo><title>nm-settings-keyfile</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings-keyfile</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.2</refmiscinfo></refmeta><refnamediv><refname>nm-settings-keyfile</refname><refpurpose>Description of <emphasis>keyfile</emphasis> settings plugin</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
+<refentry id="nm-settings-keyfile"><refentryinfo><title>nm-settings-keyfile</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings-keyfile</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.91</refmiscinfo></refmeta><refnamediv><refname>nm-settings-keyfile</refname><refpurpose>Description of <emphasis>keyfile</emphasis> settings plugin</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
           NetworkManager is based on the concept of connection profiles that contain
           network configuration (see <citerefentry><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details). The profiles can be
           stored in various formats. NetworkManager uses plugins for reading and writing
@@ -218,6 +218,9 @@ Example: </emphasis>remote=ovpn.corp.com cipher=AES-256-CBC username=joe</entry>
 Example: </emphasis>password=Popocatepetl</entry></row>
 </tbody></tgroup></table>
 
+<table><title>wifi-p2p setting (section)</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Keyfile Variable</entry><entry>Format</entry><entry>Description</entry></row></thead><tbody>
+<row><entry align="left">peer</entry><entry align="left">peer</entry><entry align="left">usual hex-digits-and-colons notation</entry><entry align="left">MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:12:79:A2), or semicolon separated list of 6 bytes (obsolete) (e.g. 0;34;104;18;121;162).</entry></row>
+</tbody></tgroup></table>
 
 <table><title>802-3-ethernet setting (section)</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Keyfile Variable</entry><entry>Format</entry><entry>Description</entry></row></thead><tbody>
 <row><entry align="left">mac-address</entry><entry align="left">mac-address</entry><entry align="left">usual hex-digits-and-colons notation</entry><entry align="left">MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:12:79:A2), or semicolon separated list of 6 bytes (obsolete) (e.g. 0;34;104;18;121;162)</entry></row>
@@ -227,6 +230,7 @@ Example: </emphasis>password=Popocatepetl</entry></row>
 Example: </emphasis>mac-address-blacklist= 00:22:68:12:79:A6;00:22:68:12:79:78</entry></row>
 </tbody></tgroup></table>
 
+
 <table><title>802-11-wireless setting (section)</title><tgroup cols="4"><thead><row><entry>Property</entry><entry>Keyfile Variable</entry><entry>Format</entry><entry>Description</entry></row></thead><tbody>
 <row><entry align="left">ssid</entry><entry align="left">ssid</entry><entry align="left">string (or decimal-byte list - obsolete)</entry><entry align="left">SSID of Wi-Fi network.<emphasis role="bold">
 
diff --git a/man/nm-settings.5 b/man/nm-settings.5
index 215f4633..7f5f7348 100644
--- a/man/nm-settings.5
+++ b/man/nm-settings.5
@@ -2,12 +2,12 @@
 .\"     Title: nm-settings
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Configuration
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NM\-SETTINGS" "5" "" "NetworkManager 1\&.15\&.2" "Configuration"
+.TH "NM\-SETTINGS" "5" "" "NetworkManager 1\&.15\&.91" "Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -266,7 +266,7 @@ string
 T}:T{
 \ \&
 T}:T{
-This represents the identity of the connection used for various purposes\&. It allows to configure multiple profiles to share the identity\&. Also, the stable\-id can contain placeholders that are substituted dynamically and deterministically depending on the context\&. The stable\-id is used for generating IPv6 stable private addresses with ipv6\&.addr\-gen\-mode=stable\-privacy\&. It is also used to seed the generated cloned MAC address for ethernet\&.cloned\-mac\-address=stable and wifi\&.cloned\-mac\-address=stable\&. It is also used as DHCP client identifier with ipv4\&.dhcp\-client\-id=stable and to derive the DHCP DUID with ipv6\&.dhcp\-duid=stable\-[llt,ll,uuid]\&. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm\&. For example, a per\-host key is commonly also included, so that different systems end up generating different IDs\&. Or with ipv6\&.addr\-gen\-mode=stable\-privacy, also the device\*(Aqs name is included, so that different interfaces yield different addresses\&. The \*(Aq$\*(Aq character is treated special to perform dynamic substitutions at runtime\&. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}"\&. These effectively create unique IDs per\-connection, per\-device, per\-boot, or every time\&. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device\&. Any unrecognized patterns following \*(Aq$\*(Aq are treated verbatim, however are reserved for future use\&. You are thus advised to avoid \*(Aq$\*(Aq or escape it as "$$"\&. For example, set it to "${CONNECTION}\-${BOOT}\-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates\&. If the value is unset, a global connection default is consulted\&. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection\&.
+This represents the identity of the connection used for various purposes\&. It allows to configure multiple profiles to share the identity\&. Also, the stable\-id can contain placeholders that are substituted dynamically and deterministically depending on the context\&. The stable\-id is used for generating IPv6 stable private addresses with ipv6\&.addr\-gen\-mode=stable\-privacy\&. It is also used to seed the generated cloned MAC address for ethernet\&.cloned\-mac\-address=stable and wifi\&.cloned\-mac\-address=stable\&. It is also used as DHCP client identifier with ipv4\&.dhcp\-client\-id=stable and to derive the DHCP DUID with ipv6\&.dhcp\-duid=stable\-[llt,ll,uuid]\&. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm\&. For example, a per\-host key is commonly also included, so that different systems end up generating different IDs\&. Or with ipv6\&.addr\-gen\-mode=stable\-privacy, also the device\*(Aqs name is included, so that different interfaces yield different addresses\&. The \*(Aq$\*(Aq character is treated special to perform dynamic substitutions at runtime\&. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}"\&. These effectively create unique IDs per\-connection, per\-device, per\-boot, or every time\&. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device\&. Any unrecognized patterns following \*(Aq$\*(Aq are treated verbatim, however are reserved for future use\&. You are thus advised to avoid \*(Aq$\*(Aq or escape it as "$$"\&. For example, set it to "${CONNECTION}\-${BOOT}\-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates\&. If the value is unset, a global connection default is consulted\&. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection\&.
 T}
 T{
 timestamp
@@ -3903,6 +3903,54 @@ Specifies the time\-to\-live value to use in outgoing packets\&.
 T}
 .TE
 .sp 1
+.SS "wifi\-p2p setting"
+.PP
+Wi\-Fi P2P Settings\&.
+.TS
+allbox tab(:);
+lB lB lB lB.
+T{
+Key Name
+T}:T{
+Value Type
+T}:T{
+Default Value
+T}:T{
+Value Description
+T}
+.T&
+l l l l
+l l l l
+l l l l.
+T{
+peer
+T}:T{
+string
+T}:T{
+\ \&
+T}:T{
+The P2P device that should be connected to\&. Currently this is the only way to create or join a group\&.
+T}
+T{
+wfd\-ies
+T}:T{
+byte array
+T}:T{
+\ \&
+T}:T{
+The Wi\-Fi Display (WFD) Information Elements (IEs) to set\&. Wi\-Fi Display requires a protocol specific information element to be set in certain Wi\-Fi frames\&. These can be specified here for the purpose of establishing a connection\&. This setting is only useful when implementing a Wi\-Fi Display client\&.
+T}
+T{
+wps\-method
+T}:T{
+uint32
+T}:T{
+0
+T}:T{
+Flags indicating which mode of WPS is to be used\&. There\*(Aqs little point in changing the default setting as NetworkManager will automatically determine the best method to use\&.
+T}
+.TE
+.sp 1
 .SS "wimax setting"
 .PP
 WiMax Settings\&.
@@ -4109,6 +4157,94 @@ If specified, the password used with magic\-packet\-based Wake\-on\-LAN, represe
 T}
 .TE
 .sp 1
+.SS "wireguard setting"
+.PP
+WireGuard Ethernet Settings\&.
+.TS
+allbox tab(:);
+lB lB lB lB.
+T{
+Key Name
+T}:T{
+Value Type
+T}:T{
+Default Value
+T}:T{
+Value Description
+T}
+.T&
+l l l l
+l l l l
+l l l l
+l l l l
+l l l l
+l l l l
+l l l l.
+T{
+fwmark
+T}:T{
+uint32
+T}:T{
+0
+T}:T{
+The use of fwmark is optional and is by default off\&. Setting it to 0 disables it\&. Otherwise it is a 32\-bit fwmark for outgoing packets\&.
+T}
+T{
+listen\-port
+T}:T{
+uint32
+T}:T{
+0
+T}:T{
+The listen\-port\&. If listen\-port is not specified, the port will be chosen randomly when the interface comes up\&.
+T}
+T{
+mtu
+T}:T{
+uint32
+T}:T{
+0
+T}:T{
+If non\-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments\&. If zero a default MTU is used\&. Note that contrary to wg\-quick\*(Aqs MTU setting, this does not take into account the current routes at the time of activation\&.
+T}
+T{
+peer\-routes
+T}:T{
+boolean
+T}:T{
+TRUE
+T}:T{
+Whether to automatically add routes for the AllowedIPs ranges of the peers\&. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4\&.route\-table and ipv6\&.route\-table\&. If FALSE, no such routes are added automatically\&. In this case, the user may want to configure static routes in ipv4\&.routes and ipv6\&.routes, respectively\&.
+T}
+T{
+peers
+T}:T{
+array of \*(Aqa{sv}\*(Aq
+T}:T{
+\ \&
+T}:T{
+Array of dictionaries for the WireGuard peers\&.
+T}
+T{
+private\-key
+T}:T{
+string
+T}:T{
+\ \&
+T}:T{
+The 256 bit private\-key in base64 encoding\&.
+T}
+T{
+private\-key\-flags
+T}:T{
+NMSettingSecretFlags (uint32)
+T}:T{
+\ \&
+T}:T{
+Flags indicating how to handle the "private\-key" property\&. (see the section called \(lqSecret flag types:\(rq for flag values)
+T}
+.TE
+.sp 1
 .SS "802\-11\-wireless setting"
 .PP
 Wi\-Fi Settings\&.
@@ -4387,7 +4523,7 @@ string
 T}:T{
 \ \&
 T}:T{
-Key management used for the connection\&.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa\-none" (Ad\-Hoc WPA\-PSK), "wpa\-psk" (infrastructure WPA\-PSK), or "wpa\-eap" (WPA\-Enterprise)\&.  This property must be set for any Wi\-Fi connection that uses security\&.
+Key management used for the connection\&.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa\-none" (Ad\-Hoc WPA\-PSK), "wpa\-psk" (infrastructure WPA\-PSK), "sae" (SAE) or "wpa\-eap" (WPA\-Enterprise)\&. This property must be set for any Wi\-Fi connection that uses security\&.
 T}
 T{
 leap\-password
@@ -4450,7 +4586,7 @@ string
 T}:T{
 \ \&
 T}:T{
-Pre\-Shared\-Key for WPA networks\&.  If the key is 64\-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key\&.  Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802\&.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA\-PSK used when connecting to the Wi\-Fi network\&.
+Pre\-Shared\-Key for WPA networks\&. For WPA\-PSK, it\*(Aqs either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802\&.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character\&. The WPA3\-Personal networks use a passphrase of any length for SAE authentication\&.
 T}
 T{
 psk\-flags
diff --git a/man/nm-settings.xml b/man/nm-settings.xml
index 30895be0..83c36a91 100644
--- a/man/nm-settings.xml
+++ b/man/nm-settings.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
 <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN" "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
-<refentry id="nm-settings"><refentryinfo><title>nm-settings</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.2</refmiscinfo></refmeta><refnamediv><refname>nm-settings</refname><refpurpose>Description of settings and properties of NetworkManager connection profiles</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
+<refentry id="nm-settings"><refentryinfo><title>nm-settings</title><author>NetworkManager developers</author></refentryinfo><refmeta><refentrytitle>nm-settings</refentrytitle><manvolnum>5</manvolnum><refmiscinfo class="source">NetworkManager</refmiscinfo><refmiscinfo class="manual">Configuration</refmiscinfo><refmiscinfo class="version">1.15.91</refmiscinfo></refmeta><refnamediv><refname>nm-settings</refname><refpurpose>Description of settings and properties of NetworkManager connection profiles</refpurpose></refnamediv><refsect1 id="description"><title>Description</title><para>
           NetworkManager is based on a concept of connection profiles, sometimes referred to as
           connections only. These connection profiles contain a network configuration. When
           NetworkManager activates a connection profile on a network device the configuration will
@@ -52,7 +52,7 @@
     <row><entry align="left" id="nm-settings.property.connection.read-only">read-only</entry><entry align="left">boolean</entry><entry align="left">FALSE</entry><entry>FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.</entry></row>
     <row><entry align="left" id="nm-settings.property.connection.secondaries">secondaries</entry><entry align="left">array of string</entry><entry align="left">[]</entry><entry>List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.</entry></row>
     <row><entry align="left" id="nm-settings.property.connection.slave-type">slave-type</entry><entry align="left">string</entry><entry align="left"/><entry>Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave.</entry></row>
-    <row><entry align="left" id="nm-settings.property.connection.stable-id">stable-id</entry><entry align="left">string</entry><entry align="left"/><entry>This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.</entry></row>
+    <row><entry align="left" id="nm-settings.property.connection.stable-id">stable-id</entry><entry align="left">string</entry><entry align="left"/><entry>This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.</entry></row>
     <row><entry align="left" id="nm-settings.property.connection.timestamp">timestamp</entry><entry align="left">uint64</entry><entry align="left">0</entry><entry>The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).</entry></row>
     <row><entry align="left" id="nm-settings.property.connection.type">type</entry><entry align="left">string</entry><entry align="left"/><entry>Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc).</entry></row>
     <row><entry align="left" id="nm-settings.property.connection.uuid">uuid</entry><entry align="left">string</entry><entry align="left"/><entry>A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").</entry></row>
@@ -425,6 +425,11 @@
     <row><entry align="left" id="nm-settings.property.vxlan.tos">tos</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>Specifies the TOS value to use in outgoing packets.</entry></row>
     <row><entry align="left" id="nm-settings.property.vxlan.ttl">ttl</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>Specifies the time-to-live value to use in outgoing packets.</entry></row>
   </tbody></tgroup></informaltable></refsect2>
+  <refsect2><title>wifi-p2p setting</title><para>Wi-Fi P2P Settings.</para><informaltable><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
+    <row><entry align="left" id="nm-settings.property.wifi-p2p.peer">peer</entry><entry align="left">string</entry><entry align="left"/><entry>The P2P device that should be connected to. Currently this is the only way to create or join a group.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wifi-p2p.wfd-ies">wfd-ies</entry><entry align="left">byte array</entry><entry align="left"/><entry>The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wifi-p2p.wps-method">wps-method</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.</entry></row>
+  </tbody></tgroup></informaltable></refsect2>
   <refsect2><title>wimax setting</title><para>WiMax Settings.</para><informaltable><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
     <row><entry align="left" id="nm-settings.property.wimax.mac-address">mac-address</entry><entry align="left">byte array</entry><entry align="left"/><entry>If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1</entry></row>
     <row><entry align="left" id="nm-settings.property.wimax.network-name">network-name</entry><entry align="left">string</entry><entry align="left"/><entry>Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1</entry></row>
@@ -446,6 +451,15 @@
     <row><entry align="left" id="nm-settings.property.802-3-ethernet.wake-on-lan">wake-on-lan</entry><entry align="left">uint32</entry><entry align="left">1</entry><entry>The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).</entry></row>
     <row><entry align="left" id="nm-settings.property.802-3-ethernet.wake-on-lan-password">wake-on-lan-password</entry><entry align="left">string</entry><entry align="left"/><entry>If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.</entry></row>
   </tbody></tgroup></informaltable></refsect2>
+  <refsect2><title>wireguard setting</title><para>WireGuard Ethernet Settings.</para><informaltable><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
+    <row><entry align="left" id="nm-settings.property.wireguard.fwmark">fwmark</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.listen-port">listen-port</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.mtu">mtu</entry><entry align="left">uint32</entry><entry align="left">0</entry><entry>If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.peer-routes">peer-routes</entry><entry align="left">boolean</entry><entry align="left">TRUE</entry><entry>Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.peers">peers</entry><entry align="left">array of 'a{sv}'</entry><entry align="left"/><entry>Array of dictionaries for the WireGuard peers.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.private-key">private-key</entry><entry align="left">string</entry><entry align="left"/><entry>The 256 bit private-key in base64 encoding.</entry></row>
+    <row><entry align="left" id="nm-settings.property.wireguard.private-key-flags">private-key-flags</entry><entry align="left">NMSettingSecretFlags (uint32)</entry><entry align="left"/><entry>Flags indicating how to handle the "private-key" property. (see <xref linkend="secrets-flags"/> for flag values)</entry></row>
+  </tbody></tgroup></informaltable></refsect2>
   <refsect2><title>802-11-wireless setting</title><para>Wi-Fi Settings.</para><informaltable><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
     <row><entry align="left" id="nm-settings.property.802-11-wireless.assigned-mac-address">assigned-mac-address</entry><entry align="left">string</entry><entry align="left"/><entry>The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless.band">band</entry><entry align="left">string</entry><entry align="left"/><entry>802.11 frequency band of the network.  One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.</entry></row>
@@ -471,14 +485,14 @@
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.auth-alg">auth-alg</entry><entry align="left">string</entry><entry align="left"/><entry>When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here.  One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.fils">fils</entry><entry align="left">int32</entry><entry align="left">0</entry><entry>Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.group">group</entry><entry align="left">array of string</entry><entry align="left">[]</entry><entry>A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".</entry></row>
-    <row><entry align="left" id="nm-settings.property.802-11-wireless-security.key-mgmt">key-mgmt</entry><entry align="left">string</entry><entry align="left"/><entry>Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security.</entry></row>
+    <row><entry align="left" id="nm-settings.property.802-11-wireless-security.key-mgmt">key-mgmt</entry><entry align="left">string</entry><entry align="left"/><entry>Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.leap-password">leap-password</entry><entry align="left">string</entry><entry align="left"/><entry>The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.leap-password-flags">leap-password-flags</entry><entry align="left">NMSettingSecretFlags (uint32)</entry><entry align="left"/><entry>Flags indicating how to handle the "leap-password" property. (see <xref linkend="secrets-flags"/> for flag values)</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.leap-username">leap-username</entry><entry align="left">string</entry><entry align="left"/><entry>The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.pairwise">pairwise</entry><entry align="left">array of string</entry><entry align="left">[]</entry><entry>A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.pmf">pmf</entry><entry align="left">int32</entry><entry align="left">0</entry><entry>Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.proto">proto</entry><entry align="left">array of string</entry><entry align="left">[]</entry><entry>List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.</entry></row>
-    <row><entry align="left" id="nm-settings.property.802-11-wireless-security.psk">psk</entry><entry align="left">string</entry><entry align="left"/><entry>Pre-Shared-Key for WPA networks.  If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key.  Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network.</entry></row>
+    <row><entry align="left" id="nm-settings.property.802-11-wireless-security.psk">psk</entry><entry align="left">string</entry><entry align="left"/><entry>Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.psk-flags">psk-flags</entry><entry align="left">NMSettingSecretFlags (uint32)</entry><entry align="left"/><entry>Flags indicating how to handle the "psk" property. (see <xref linkend="secrets-flags"/> for flag values)</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.wep-key-flags">wep-key-flags</entry><entry align="left">NMSettingSecretFlags (uint32)</entry><entry align="left"/><entry>Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. (see <xref linkend="secrets-flags"/> for flag values)</entry></row>
     <row><entry align="left" id="nm-settings.property.802-11-wireless-security.wep-key-type">wep-key-type</entry><entry align="left">NMWepKeyType (uint32)</entry><entry align="left"/><entry>Controls the interpretation of WEP keys.  Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.</entry></row>
diff --git a/man/nmcli-examples.7 b/man/nmcli-examples.7
index 08018e68..8ff37d81 100644
--- a/man/nmcli-examples.7
+++ b/man/nmcli-examples.7
@@ -2,12 +2,12 @@
 .\"     Title: nmcli-examples
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: Examples
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NMCLI\-EXAMPLES" "7" "" "NetworkManager 1\&.15\&.2" "Examples"
+.TH "NMCLI\-EXAMPLES" "7" "" "NetworkManager 1\&.15\&.91" "Examples"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
diff --git a/man/nmcli.1 b/man/nmcli.1
index 86a546c7..c8a5d09a 100644
--- a/man/nmcli.1
+++ b/man/nmcli.1
@@ -2,12 +2,12 @@
 .\"     Title: nmcli
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: General Commands Manual
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NMCLI" "1" "" "NetworkManager 1\&.15\&.2" "General Commands Manual"
+.TH "NMCLI" "1" "" "NetworkManager 1\&.15\&.91" "General Commands Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -1164,7 +1164,7 @@ can be used to either force or disable the scan regardless of how fresh the acce
 .PP
 \fBwifi\fR \fBconnect\fR \fI(B)SSID\fR [\fBpassword\fR\ \fIpassword\fR] [\fBwep\-key\-type\fR\ {key\ |\ phrase}] [\fBifname\fR\ \fIifname\fR] [\fBbssid\fR\ \fIBSSID\fR] [\fBname\fR\ \fIname\fR] [\fBprivate\fR\ {yes\ |\ no}] [\fBhidden\fR\ {yes\ |\ no}]
 .RS 4
-Connect to a Wi\-Fi network specified by SSID or BSSID\&. The command finds a matching connnection or creates one and then activates it on a device\&. This is a command\-line counterpart of clicking an SSID in a GUI client\&. If a connection for the network already exists, it is possible to bring up (activate) the existing profile as follows:
+Connect to a Wi\-Fi network specified by SSID or BSSID\&. The command finds a matching connection or creates one and then activates it on a device\&. This is a command\-line counterpart of clicking an SSID in a GUI client\&. If a connection for the network already exists, it is possible to bring up (activate) the existing profile as follows:
 \fBnmcli con up id \fR\fB\fIname\fR\fR\&. Note that only open, WEP and WPA\-PSK networks are supported if no previous connection exists\&. It is also assumed that IP configuration is obtained via DHCP\&.
 .sp
 If
diff --git a/man/nmcli.xml b/man/nmcli.xml
index f092a2e4..3f123a57 100644
--- a/man/nmcli.xml
+++ b/man/nmcli.xml
@@ -1445,7 +1445,7 @@
 
         <listitem>
           <para>Connect to a Wi-Fi network specified by SSID or BSSID. The command
-          finds a matching connnection or creates one and then activates it on a device.
+          finds a matching connection or creates one and then activates it on a device.
           This is a command-line counterpart of clicking an SSID in a GUI client. If
           a connection for the network already exists, it is possible to bring up
           (activate) the existing profile as follows:
diff --git a/man/nmtui.1 b/man/nmtui.1
index f9fa109e..1a084b41 100644
--- a/man/nmtui.1
+++ b/man/nmtui.1
@@ -2,12 +2,12 @@
 .\"     Title: nmtui
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 01/22/2019
+.\"      Date: 03/11/2019
 .\"    Manual: General Commands Manual
-.\"    Source: NetworkManager 1.15.2
+.\"    Source: NetworkManager 1.15.91
 .\"  Language: English
 .\"
-.TH "NMTUI" "1" "" "NetworkManager 1\&.15\&.2" "General Commands Manual"
+.TH "NMTUI" "1" "" "NetworkManager 1\&.15\&.91" "General Commands Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------