New upstream version 1.16.0 upstream/1.16.0

1 files changed, 30 insertions, 10 deletions

diff --git a/docs/api/settings-spec.xml b/docs/api/settings-spec.xml
index d31d299e..2a73f041 100644
--- a/docs/api/settings-spec.xml
+++ b/docs/api/settings-spec.xml
@@ -22,7 +22,7 @@
     <row><entry><screen>read-only<indexterm zone="settings-connection"><primary sortas="read-only">read-only</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.</entry></row>
     <row><entry><screen>secondaries<indexterm zone="settings-connection"><primary sortas="secondaries">secondaries</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.</entry></row>
     <row><entry><screen>slave-type<indexterm zone="settings-connection"><primary sortas="slave-type">slave-type</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave.</entry></row>
-    <row><entry><screen>stable-id<indexterm zone="settings-connection"><primary sortas="stable-id">stable-id</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.</entry></row>
+    <row><entry><screen>stable-id<indexterm zone="settings-connection"><primary sortas="stable-id">stable-id</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.</entry></row>
     <row><entry><screen>timestamp<indexterm zone="settings-connection"><primary sortas="timestamp">timestamp</primary></indexterm></screen></entry><entry><screen>uint64</screen></entry><entry><screen>0</screen></entry><entry>The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).</entry></row>
     <row><entry><screen>type<indexterm zone="settings-connection"><primary sortas="type">type</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc).</entry></row>
     <row><entry><screen>uuid<indexterm zone="settings-connection"><primary sortas="uuid">uuid</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").</entry></row>
@@ -173,7 +173,7 @@
     <row><entry><screen>home-only<indexterm zone="settings-gsm"><primary sortas="home-only">home-only</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.</entry></row>
     <row><entry><screen>mtu<indexterm zone="settings-gsm"><primary sortas="mtu">mtu</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.</entry></row>
     <row><entry><screen>network-id<indexterm zone="settings-gsm"><primary sortas="network-id">network-id</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.</entry></row>
-    <row><entry><screen>number<indexterm zone="settings-gsm"><primary sortas="number">number</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Number to dial when establishing a PPP data session with the GSM-based mobile broadband network.  Many modems do not require PPP for connections to the mobile network and thus this property should be left blank, which allows NetworkManager to select the appropriate settings automatically.</entry></row>
+    <row><entry><screen>number<indexterm zone="settings-gsm"><primary sortas="number">number</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1</entry></row>
     <row><entry><screen>password<indexterm zone="settings-gsm"><primary sortas="password">password</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.</entry></row>
     <row><entry><screen>password-flags<indexterm zone="settings-gsm"><primary sortas="password-flags">password-flags</primary></indexterm></screen></entry><entry><screen>NMSettingSecretFlags (uint32)</screen></entry><entry><screen/></entry><entry>Flags indicating how to handle the "password" property.</entry></row>
     <row><entry><screen>pin<indexterm zone="settings-gsm"><primary sortas="pin">pin</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device.</entry></row>
@@ -204,7 +204,7 @@
     <row><entry><screen>dhcp-timeout<indexterm zone="settings-ipv4"><primary sortas="dhcp-timeout">dhcp-timeout</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>A timeout for a DHCP transaction in seconds.</entry></row>
     <row><entry><screen>dns<indexterm zone="settings-ipv4"><primary sortas="dns">dns</primary></indexterm></screen></entry><entry><screen>array of uint32</screen></entry><entry><screen>[]</screen></entry><entry>Array of IP addresses of DNS servers (as network-byte-order integers)</entry></row>
     <row><entry><screen>dns-options<indexterm zone="settings-ipv4"><primary sortas="dns-options">dns-options</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.</entry></row>
-    <row><entry><screen>dns-priority<indexterm zone="settings-ipv4"><primary sortas="dns-priority">dns-priority</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority).  Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.</entry></row>
+    <row><entry><screen>dns-priority<indexterm zone="settings-ipv4"><primary sortas="dns-priority">dns-priority</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.</entry></row>
     <row><entry><screen>dns-search<indexterm zone="settings-ipv4"><primary sortas="dns-search">dns-search</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.</entry></row>
     <row><entry><screen>gateway<indexterm zone="settings-ipv4"><primary sortas="gateway">gateway</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The gateway associated with this configuration. This is only meaningful if "addresses" is also set.</entry></row>
     <row><entry><screen>ignore-auto-dns<indexterm zone="settings-ipv4"><primary sortas="ignore-auto-dns">ignore-auto-dns</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>When "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.</entry></row>
@@ -230,7 +230,7 @@
     <row><entry><screen>dhcp-timeout<indexterm zone="settings-ipv6"><primary sortas="dhcp-timeout">dhcp-timeout</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>A timeout for a DHCP transaction in seconds.</entry></row>
     <row><entry><screen>dns<indexterm zone="settings-ipv6"><primary sortas="dns">dns</primary></indexterm></screen></entry><entry><screen>array of byte array</screen></entry><entry><screen>[]</screen></entry><entry>Array of IP addresses of DNS servers (in network byte order)</entry></row>
     <row><entry><screen>dns-options<indexterm zone="settings-ipv6"><primary sortas="dns-options">dns-options</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.</entry></row>
-    <row><entry><screen>dns-priority<indexterm zone="settings-ipv6"><primary sortas="dns-priority">dns-priority</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority).  Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.</entry></row>
+    <row><entry><screen>dns-priority<indexterm zone="settings-ipv6"><primary sortas="dns-priority">dns-priority</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.</entry></row>
     <row><entry><screen>dns-search<indexterm zone="settings-ipv6"><primary sortas="dns-search">dns-search</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.</entry></row>
     <row><entry><screen>gateway<indexterm zone="settings-ipv6"><primary sortas="gateway">gateway</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The gateway associated with this configuration. This is only meaningful if "addresses" is also set.</entry></row>
     <row><entry><screen>ignore-auto-dns<indexterm zone="settings-ipv6"><primary sortas="ignore-auto-dns">ignore-auto-dns</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>When "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.</entry></row>
@@ -389,7 +389,7 @@
         </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
     <row><entry><screen>config<indexterm zone="settings-team"><primary sortas="config">config</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details.</entry></row>
     <row><entry><screen>interface-name<indexterm zone="settings-team"><primary sortas="interface-name">interface-name</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the team's interface name.</entry></row>
-    <row><entry><screen>link-watchers<indexterm zone="settings-team"><primary sortas="link-watchers">link-watchers</primary></indexterm></screen></entry><entry><screen>array of vardict</screen></entry><entry><screen>[]</screen></entry><entry>Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details.</entry></row>
+    <row><entry><screen>link-watchers<indexterm zone="settings-team"><primary sortas="link-watchers">link-watchers</primary></indexterm></screen></entry><entry><screen>array of vardict</screen></entry><entry><screen>[]</screen></entry><entry>Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.</entry></row>
     <row><entry><screen>mcast-rejoin-count<indexterm zone="settings-team"><primary sortas="mcast-rejoin-count">mcast-rejoin-count</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Corresponds to the teamd mcast_rejoin.count.</entry></row>
     <row><entry><screen>mcast-rejoin-interval<indexterm zone="settings-team"><primary sortas="mcast-rejoin-interval">mcast-rejoin-interval</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Corresponds to the teamd mcast_rejoin.interval.</entry></row>
     <row><entry><screen>notify-peers-count<indexterm zone="settings-team"><primary sortas="notify-peers-count">notify-peers-count</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Corresponds to the teamd notify_peers.count.</entry></row>
@@ -411,7 +411,7 @@
     <row><entry><screen>config<indexterm zone="settings-team-port"><primary sortas="config">config</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details.</entry></row>
     <row><entry><screen>lacp-key<indexterm zone="settings-team-port"><primary sortas="lacp-key">lacp-key</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Corresponds to the teamd ports.PORTIFNAME.lacp_key.</entry></row>
     <row><entry><screen>lacp-prio<indexterm zone="settings-team-port"><primary sortas="lacp-prio">lacp-prio</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>255</screen></entry><entry>Corresponds to the teamd ports.PORTIFNAME.lacp_prio.</entry></row>
-    <row><entry><screen>link-watchers<indexterm zone="settings-team-port"><primary sortas="link-watchers">link-watchers</primary></indexterm></screen></entry><entry><screen>array of vardict</screen></entry><entry><screen>[]</screen></entry><entry>Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details.</entry></row>
+    <row><entry><screen>link-watchers<indexterm zone="settings-team-port"><primary sortas="link-watchers">link-watchers</primary></indexterm></screen></entry><entry><screen>array of vardict</screen></entry><entry><screen>[]</screen></entry><entry>Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.</entry></row>
     <row><entry><screen>prio<indexterm zone="settings-team-port"><primary sortas="prio">prio</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Corresponds to the teamd ports.PORTIFNAME.prio.</entry></row>
     <row><entry><screen>queue-id<indexterm zone="settings-team-port"><primary sortas="queue-id">queue-id</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>-1</screen></entry><entry>Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config.</entry></row>
     <row><entry><screen>sticky<indexterm zone="settings-team-port"><primary sortas="sticky">sticky</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>Corresponds to the teamd ports.PORTIFNAME.sticky.</entry></row>
@@ -471,6 +471,13 @@
     <row><entry><screen>tos<indexterm zone="settings-vxlan"><primary sortas="tos">tos</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>Specifies the TOS value to use in outgoing packets.</entry></row>
     <row><entry><screen>ttl<indexterm zone="settings-vxlan"><primary sortas="ttl">ttl</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>Specifies the time-to-live value to use in outgoing packets.</entry></row>
   </tbody></tgroup></table></para></refsect1></refentry>
+  <refentry id="settings-wifi-p2p"><refnamediv><refname>wifi-p2p</refname><refpurpose>Wi-Fi P2P Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-wifi-p2p.properties">
+            Properties
+        </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
+    <row><entry><screen>peer<indexterm zone="settings-wifi-p2p"><primary sortas="peer">peer</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The P2P device that should be connected to. Currently this is the only way to create or join a group.</entry></row>
+    <row><entry><screen>wfd-ies<indexterm zone="settings-wifi-p2p"><primary sortas="wfd-ies">wfd-ies</primary></indexterm></screen></entry><entry><screen>byte array</screen></entry><entry><screen/></entry><entry>The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.</entry></row>
+    <row><entry><screen>wps-method<indexterm zone="settings-wifi-p2p"><primary sortas="wps-method">wps-method</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.</entry></row>
+  </tbody></tgroup></table></para></refsect1></refentry>
   <refentry id="settings-wimax"><refnamediv><refname>wimax</refname><refpurpose>WiMax Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-wimax.properties">
             Properties
         </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
@@ -480,7 +487,7 @@
   <refentry id="settings-802-3-ethernet"><refnamediv><refname>802-3-ethernet</refname><refpurpose>Wired Ethernet Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-802-3-ethernet.properties">
             Properties
         </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
-    <row><entry><screen>assigned-mac-address<indexterm zone="settings-802-3-ethernet"><primary sortas="assigned-mac-address">assigned-mac-address</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explict hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".</entry></row>
+    <row><entry><screen>assigned-mac-address<indexterm zone="settings-802-3-ethernet"><primary sortas="assigned-mac-address">assigned-mac-address</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".</entry></row>
     <row><entry><screen>auto-negotiate<indexterm zone="settings-802-3-ethernet"><primary sortas="auto-negotiate">auto-negotiate</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>FALSE</screen></entry><entry>When TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.</entry></row>
     <row><entry><screen>cloned-mac-address<indexterm zone="settings-802-3-ethernet"><primary sortas="cloned-mac-address">cloned-mac-address</primary></indexterm></screen></entry><entry><screen>byte array</screen></entry><entry><screen/></entry><entry>This D-Bus field is deprecated in favor of "assigned-mac-address" which is more flexible and allows specifying special variants like "random". For libnm and nmcli, this field is called "cloned-mac-address".</entry></row>
     <row><entry><screen>duplex<indexterm zone="settings-802-3-ethernet"><primary sortas="duplex">duplex</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.</entry></row>
@@ -496,10 +503,21 @@
     <row><entry><screen>wake-on-lan<indexterm zone="settings-802-3-ethernet"><primary sortas="wake-on-lan">wake-on-lan</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>1</screen></entry><entry>The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).</entry></row>
     <row><entry><screen>wake-on-lan-password<indexterm zone="settings-802-3-ethernet"><primary sortas="wake-on-lan-password">wake-on-lan-password</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.</entry></row>
   </tbody></tgroup></table></para></refsect1></refentry>
+  <refentry id="settings-wireguard"><refnamediv><refname>wireguard</refname><refpurpose>WireGuard Ethernet Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-wireguard.properties">
+            Properties
+        </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
+    <row><entry><screen>fwmark<indexterm zone="settings-wireguard"><primary sortas="fwmark">fwmark</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.</entry></row>
+    <row><entry><screen>listen-port<indexterm zone="settings-wireguard"><primary sortas="listen-port">listen-port</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.</entry></row>
+    <row><entry><screen>mtu<indexterm zone="settings-wireguard"><primary sortas="mtu">mtu</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.</entry></row>
+    <row><entry><screen>peer-routes<indexterm zone="settings-wireguard"><primary sortas="peer-routes">peer-routes</primary></indexterm></screen></entry><entry><screen>boolean</screen></entry><entry><screen>TRUE</screen></entry><entry>Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively.</entry></row>
+    <row><entry><screen>peers<indexterm zone="settings-wireguard"><primary sortas="peers">peers</primary></indexterm></screen></entry><entry><screen>array of 'a{sv}'</screen></entry><entry><screen/></entry><entry>Array of dictionaries for the WireGuard peers.</entry></row>
+    <row><entry><screen>private-key<indexterm zone="settings-wireguard"><primary sortas="private-key">private-key</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The 256 bit private-key in base64 encoding.</entry></row>
+    <row><entry><screen>private-key-flags<indexterm zone="settings-wireguard"><primary sortas="private-key-flags">private-key-flags</primary></indexterm></screen></entry><entry><screen>NMSettingSecretFlags (uint32)</screen></entry><entry><screen/></entry><entry>Flags indicating how to handle the "private-key" property.</entry></row>
+  </tbody></tgroup></table></para></refsect1></refentry>
   <refentry id="settings-802-11-wireless"><refnamediv><refname>802-11-wireless</refname><refpurpose>Wi-Fi Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-802-11-wireless.properties">
             Properties
         </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
-    <row><entry><screen>assigned-mac-address<indexterm zone="settings-802-11-wireless"><primary sortas="assigned-mac-address">assigned-mac-address</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explict hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".</entry></row>
+    <row><entry><screen>assigned-mac-address<indexterm zone="settings-802-11-wireless"><primary sortas="assigned-mac-address">assigned-mac-address</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".</entry></row>
     <row><entry><screen>band<indexterm zone="settings-802-11-wireless"><primary sortas="band">band</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>802.11 frequency band of the network.  One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.</entry></row>
     <row><entry><screen>bssid<indexterm zone="settings-802-11-wireless"><primary sortas="bssid">bssid</primary></indexterm></screen></entry><entry><screen>byte array</screen></entry><entry><screen/></entry><entry>If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.</entry></row>
     <row><entry><screen>channel<indexterm zone="settings-802-11-wireless"><primary sortas="channel">channel</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>0</screen></entry><entry>Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the "band" property to be set.</entry></row>
@@ -525,14 +543,14 @@
     <row><entry><screen>auth-alg<indexterm zone="settings-802-11-wireless-security"><primary sortas="auth-alg">auth-alg</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here.  One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.</entry></row>
     <row><entry><screen>fils<indexterm zone="settings-802-11-wireless-security"><primary sortas="fils">fils</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.</entry></row>
     <row><entry><screen>group<indexterm zone="settings-802-11-wireless-security"><primary sortas="group">group</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".</entry></row>
-    <row><entry><screen>key-mgmt<indexterm zone="settings-802-11-wireless-security"><primary sortas="key-mgmt">key-mgmt</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security.</entry></row>
+    <row><entry><screen>key-mgmt<indexterm zone="settings-802-11-wireless-security"><primary sortas="key-mgmt">key-mgmt</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.</entry></row>
     <row><entry><screen>leap-password<indexterm zone="settings-802-11-wireless-security"><primary sortas="leap-password">leap-password</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").</entry></row>
     <row><entry><screen>leap-password-flags<indexterm zone="settings-802-11-wireless-security"><primary sortas="leap-password-flags">leap-password-flags</primary></indexterm></screen></entry><entry><screen>NMSettingSecretFlags (uint32)</screen></entry><entry><screen/></entry><entry>Flags indicating how to handle the "leap-password" property.</entry></row>
     <row><entry><screen>leap-username<indexterm zone="settings-802-11-wireless-security"><primary sortas="leap-username">leap-username</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").</entry></row>
     <row><entry><screen>pairwise<indexterm zone="settings-802-11-wireless-security"><primary sortas="pairwise">pairwise</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".</entry></row>
     <row><entry><screen>pmf<indexterm zone="settings-802-11-wireless-security"><primary sortas="pmf">pmf</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>0</screen></entry><entry>Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.</entry></row>
     <row><entry><screen>proto<indexterm zone="settings-802-11-wireless-security"><primary sortas="proto">proto</primary></indexterm></screen></entry><entry><screen>array of string</screen></entry><entry><screen>[]</screen></entry><entry>List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.</entry></row>
-    <row><entry><screen>psk<indexterm zone="settings-802-11-wireless-security"><primary sortas="psk">psk</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Pre-Shared-Key for WPA networks.  If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key.  Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network.</entry></row>
+    <row><entry><screen>psk<indexterm zone="settings-802-11-wireless-security"><primary sortas="psk">psk</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.</entry></row>
     <row><entry><screen>psk-flags<indexterm zone="settings-802-11-wireless-security"><primary sortas="psk-flags">psk-flags</primary></indexterm></screen></entry><entry><screen>NMSettingSecretFlags (uint32)</screen></entry><entry><screen/></entry><entry>Flags indicating how to handle the "psk" property.</entry></row>
     <row><entry><screen>wep-key-flags<indexterm zone="settings-802-11-wireless-security"><primary sortas="wep-key-flags">wep-key-flags</primary></indexterm></screen></entry><entry><screen>NMSettingSecretFlags (uint32)</screen></entry><entry><screen/></entry><entry>Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties.</entry></row>
     <row><entry><screen>wep-key-type<indexterm zone="settings-802-11-wireless-security"><primary sortas="wep-key-type">wep-key-type</primary></indexterm></screen></entry><entry><screen>NMWepKeyType (uint32)</screen></entry><entry><screen/></entry><entry>Controls the interpretation of WEP keys.  Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.</entry></row>
@@ -546,7 +564,9 @@
   <refentry id="settings-wpan"><refnamediv><refname>wpan</refname><refpurpose>IEEE 802.15.4 (WPAN) MAC Settings</refpurpose></refnamediv><refsect1 role="properties"><title id="settings-wpan.properties">
             Properties
         </title><para><table><tgroup cols="4"><thead><row><entry>Key Name</entry><entry>Value Type</entry><entry>Default Value</entry><entry>Value Description</entry></row></thead><tbody>
+    <row><entry><screen>channel<indexterm zone="settings-wpan"><primary sortas="channel">channel</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>-1</screen></entry><entry>IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to".</entry></row>
     <row><entry><screen>mac-address<indexterm zone="settings-wpan"><primary sortas="mac-address">mac-address</primary></indexterm></screen></entry><entry><screen>string</screen></entry><entry><screen/></entry><entry>If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches.</entry></row>
+    <row><entry><screen>page<indexterm zone="settings-wpan"><primary sortas="page">page</primary></indexterm></screen></entry><entry><screen>int32</screen></entry><entry><screen>-1</screen></entry><entry>IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to".</entry></row>
     <row><entry><screen>pan-id<indexterm zone="settings-wpan"><primary sortas="pan-id">pan-id</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>65535</screen></entry><entry>IEEE 802.15.4 Personal Area Network (PAN) identifier.</entry></row>
     <row><entry><screen>short-address<indexterm zone="settings-wpan"><primary sortas="short-address">short-address</primary></indexterm></screen></entry><entry><screen>uint32</screen></entry><entry><screen>65535</screen></entry><entry>Short IEEE 802.15.4 address to be used within a restricted environment.</entry></row>
   </tbody></tgroup></table></para></refsect1></refentry>