From 7d8baf4ac0480a542f000c1201df85427a22332c Mon Sep 17 00:00:00 2001
From: Jeremy Bicha <jeremy.bicha@canonical.com>
Date: Tue, 8 Feb 2022 12:07:45 -0500
Subject: New upstream version 1.35.90

---
 src/libnmc-setting/settings-docs-input.xml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'src/libnmc-setting/settings-docs-input.xml')

diff --git a/src/libnmc-setting/settings-docs-input.xml b/src/libnmc-setting/settings-docs-input.xml
index 3555f302..4e642677 100644
--- a/src/libnmc-setting/settings-docs-input.xml
+++ b/src/libnmc-setting/settings-docs-input.xml
@@ -1,4 +1,4 @@
-<nm-setting-docs><setting name="connection" description="General Connection Profile Settings" name_upper="CONNECTION"><property name="auth-retries" name_upper="AUTH_RETRIES" type="int32" default="-1" description="The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently, this only applies to 802-1x authentication." /><property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description="Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See &quot;secondaries&quot; as an alternative to automatically connect VPN profiles." /><property name="autoconnect-priority" name_upper="AUTOCONNECT_PRIORITY" type="int32" default="0" description="The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen." /><property name="autoconnect-retries" name_upper="AUTOCONNECT_RETRIES" type="int32" default="-1" description="The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again." /><property name="autoconnect-slaves" name_upper="AUTOCONNECT_SLAVES" type="NMSettingConnectionAutoconnectSlaves (int32)" description="Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties &quot;autoconnect&quot;, &quot;autoconnect-priority&quot; and &quot;autoconnect-retries&quot; are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0." /><property name="dns-over-tls" name_upper="DNS_OVER_TLS" type="int32" default="-1" description="Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: &quot;yes&quot; (2) use DNSOverTls and disabled fallback, &quot;opportunistic&quot; (1) use DNSOverTls but allow fallback to unencrypted resolution, &quot;no&quot; (0) don't ever use DNSOverTls. If unspecified &quot;default&quot; depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="gateway-ping-timeout" name_upper="GATEWAY_PING_TIMEOUT" type="uint32" default="0" description="If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping." /><property name="id" name_upper="ID" type="string" description="A human readable unique identifier for the connection, like &quot;Work Wi-Fi&quot; or &quot;T-Mobile 3G&quot;." /><property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface." /><property name="lldp" name_upper="LLDP" type="int32" default="-1" description="Whether LLDP is enabled for the connection." /><property name="llmnr" name_upper="LLMNR" type="int32" default="-1" description="Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: &quot;yes&quot; (2) register hostname and resolving for the connection, &quot;no&quot; (0) disable LLMNR for the interface, &quot;resolve&quot; (1) do not register hostname but allow resolving of LLMNR host names If unspecified, &quot;default&quot; ultimately depends on the DNS plugin (which for systemd-resolved currently means &quot;yes&quot;). This feature requires a plugin which supports LLMNR. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="master" name_upper="MASTER" type="string" description="Interface name of the master device or UUID of the master connection." /><property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: &quot;yes&quot; (2) register hostname and resolving for the connection, &quot;no&quot; (0) disable mDNS for the interface, &quot;resolve&quot; (1) do not register hostname but allow resolving of mDNS host names and &quot;default&quot; (-1) to allow lookup of a global default in NetworkManager.conf. If unspecified, &quot;default&quot; ultimately depends on the DNS plugin (which for systemd-resolved currently means &quot;no&quot;). This feature requires a plugin which supports mDNS. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="metered" name_upper="METERED" type="NMMetered (int32)" description="Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately." /><property name="mud-url" name_upper="MUD_URL" type="string" description="If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with &quot;https://&quot;. The special value &quot;none&quot; is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is &quot;none&quot;." /><property name="multi-connect" name_upper="MULTI_CONNECT" type="int32" default="0" description="Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect." /><property name="permissions" name_upper="PERMISSIONS" type="array of string" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." /><property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." /><property name="secondaries" name_upper="SECONDARIES" type="array of string" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently, only VPN connections are supported." /><property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." /><property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret-key. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${MAC}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds to the interface name of the device and &quot;${MAC}&quot; is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." /><property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." /><property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." /><property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." /><property name="wait-device-timeout" name_upper="WAIT_DEVICE_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. This works by waiting for the given timeout until a compatible device for the profile is available and managed. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time." /><property name="zone" name_upper="ZONE" type="string" description="The trust level of a the connection.  Free form case-insensitive string (for example &quot;Home&quot;, &quot;Work&quot;, &quot;Public&quot;).  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately." /></setting><setting name="6lowpan" description="6LoWPAN Settings" name_upper="6LOWPAN"><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created." /></setting><setting name="802-1x" description="IEEE 802.1x Authentication Settings" name_upper="802_1X"><property name="altsubject-matches" name_upper="ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed." /><property name="anonymous-identity" name_upper="ANONYMOUS_IDENTITY" type="string" description="Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS." /><property name="auth-timeout" name_upper="AUTH_TIMEOUT" type="int32" default="0" description="A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds." /><property name="ca-cert" name_upper="CA_CERT" type="byte array" description="Contains the CA certificate if used by the EAP method specified in the &quot;eap&quot; property. Certificate data is specified using a &quot;scheme&quot;; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory." /><property name="ca-cert-password" name_upper="CA_CERT_PASSWORD" type="string" description="The password used to access the CA certificate stored in &quot;ca-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="ca-cert-password-flags" name_upper="CA_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;ca-cert-password&quot; property." /><property name="ca-path" name_upper="CA_PATH" type="string" description="UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the &quot;ca-cert&quot; property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored." /><property name="client-cert" name_upper="CLIENT_CERT" type="byte array" description="Contains the client certificate if used by the EAP method specified in the &quot;eap&quot; property. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte." /><property name="client-cert-password" name_upper="CLIENT_CERT_PASSWORD" type="string" description="The password used to access the client certificate stored in &quot;client-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="client-cert-password-flags" name_upper="CLIENT_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;client-cert-password&quot; property." /><property name="domain-match" name_upper="DOMAIN_MATCH" type="string" description="Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="domain-suffix-match" name_upper="DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="eap" name_upper="EAP" type="array of string" description="The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: &quot;leap&quot;, &quot;md5&quot;, &quot;tls&quot;, &quot;peap&quot;, &quot;ttls&quot;, &quot;pwd&quot;, and &quot;fast&quot;.  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations." /><property name="identity" name_upper="IDENTITY" type="string" description="Identity string for EAP authentication methods.  Often the user's user or login name." /><property name="optional" name_upper="OPTIONAL" type="boolean" default="FALSE" description="Whether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication." /><property name="pac-file" name_upper="PAC_FILE" type="string" description="UTF-8 encoded file path containing PAC for EAP-FAST." /><property name="password" name_upper="PASSWORD" type="string" description="UTF-8 encoded password used for EAP authentication methods. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="password-raw" name_upper="PASSWORD_RAW" type="byte array" description="Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." /><property name="password-raw-flags" name_upper="PASSWORD_RAW_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password-raw&quot; property." /><property name="phase1-auth-flags" name_upper="PHASE1_AUTH_FLAGS" type="uint32" default="0" description="Specifies authentication flags to use in &quot;phase 1&quot; outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details." /><property name="phase1-fast-provisioning" name_upper="PHASE1_FAST_PROVISIONING" type="string" description="Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the &quot;eap&quot; property. Recognized values are &quot;0&quot; (disabled), &quot;1&quot; (allow unauthenticated provisioning), &quot;2&quot; (allow authenticated provisioning), and &quot;3&quot; (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details." /><property name="phase1-peaplabel" name_upper="PHASE1_PEAPLABEL" type="string" description="Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to &quot;1&quot; to force use of the new PEAP label.  See the wpa_supplicant documentation for more details." /><property name="phase1-peapver" name_upper="PHASE1_PEAPVER" type="string" description="Forces which PEAP version is used when PEAP is set as the EAP method in the &quot;eap&quot; property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to &quot;0&quot; or &quot;1&quot; to force that specific PEAP version." /><property name="phase2-altsubject-matches" name_upper="PHASE2_ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed." /><property name="phase2-auth" name_upper="PHASE2_AUTH" type="string" description="Specifies the allowed &quot;phase 2&quot; inner authentication method when an EAP method that uses an inner TLS tunnel is specified in the &quot;eap&quot; property.  For TTLS this property selects one of the supported non-EAP inner methods: &quot;pap&quot;, &quot;chap&quot;, &quot;mschap&quot;, &quot;mschapv2&quot; while &quot;phase2-autheap&quot; selects an EAP inner method.  For PEAP this selects an inner EAP method, one of: &quot;gtc&quot;, &quot;otp&quot;, &quot;md5&quot; and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. Both &quot;phase2-auth&quot; and &quot;phase2-autheap&quot; cannot be specified." /><property name="phase2-autheap" name_upper="PHASE2_AUTHEAP" type="string" description="Specifies the allowed &quot;phase 2&quot; inner EAP-based authentication method when TTLS is specified in the &quot;eap&quot; property.  Recognized EAP-based &quot;phase 2&quot; methods are &quot;md5&quot;, &quot;mschapv2&quot;, &quot;otp&quot;, &quot;gtc&quot;, and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details." /><property name="phase2-ca-cert" name_upper="PHASE2_CA_CERT" type="byte array" description="Contains the &quot;phase 2&quot; CA certificate if used by the EAP method specified in the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; properties. Certificate data is specified using a &quot;scheme&quot;; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory." /><property name="phase2-ca-cert-password" name_upper="PHASE2_CA_CERT_PASSWORD" type="string" description="The password used to access the &quot;phase2&quot; CA certificate stored in &quot;phase2-ca-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="phase2-ca-cert-password-flags" name_upper="PHASE2_CA_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-ca-cert-password&quot; property." /><property name="phase2-ca-path" name_upper="PHASE2_CA_PATH" type="string" description="UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the &quot;phase2-ca-cert&quot; property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored." /><property name="phase2-client-cert" name_upper="PHASE2_CLIENT_CERT" type="byte array" description="Contains the &quot;phase 2&quot; client certificate if used by the EAP method specified in the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; properties. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended." /><property name="phase2-client-cert-password" name_upper="PHASE2_CLIENT_CERT_PASSWORD" type="string" description="The password used to access the &quot;phase2&quot; client certificate stored in &quot;phase2-client-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="phase2-client-cert-password-flags" name_upper="PHASE2_CLIENT_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-client-cert-password&quot; property." /><property name="phase2-domain-match" name_upper="PHASE2_DOMAIN_MATCH" type="string" description="Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="phase2-domain-suffix-match" name_upper="PHASE2_DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="phase2-private-key" name_upper="PHASE2_PRIVATE_KEY" type="byte array" description="Contains the &quot;phase 2&quot; inner private key when the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; property is set to &quot;tls&quot;. Key data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the &quot;phase2-private-key-password&quot; property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte, and as with the blob scheme the &quot;phase2-private-key-password&quot; property must be set to the password used to decode the PKCS#12 private key and certificate." /><property name="phase2-private-key-password" name_upper="PHASE2_PRIVATE_KEY_PASSWORD" type="string" description="The password used to decrypt the &quot;phase 2&quot; private key specified in the &quot;phase2-private-key&quot; property when the private key either uses the path scheme, or is a PKCS#12 format key." /><property name="phase2-private-key-password-flags" name_upper="PHASE2_PRIVATE_KEY_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-private-key-password&quot; property." /><property name="phase2-subject-match" name_upper="PHASE2_SUBJECT_MATCH" type="string" description="Substring to be matched against the subject of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match." /><property name="pin" name_upper="PIN" type="string" description="PIN used for EAP authentication methods." /><property name="pin-flags" name_upper="PIN_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;pin&quot; property." /><property name="private-key" name_upper="PRIVATE_KEY" type="byte array" description="Contains the private key when the &quot;eap&quot; property is set to &quot;tls&quot;. Key data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the &quot;private-key-password&quot; property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte, and as with the blob scheme the &quot;private-key-password&quot; property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: &quot;private-key&quot; is not a &quot;secret&quot; property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users.  Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data." /><property name="private-key-password" name_upper="PRIVATE_KEY_PASSWORD" type="string" description="The password used to decrypt the private key specified in the &quot;private-key&quot; property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key." /><property name="private-key-password-flags" name_upper="PRIVATE_KEY_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;private-key-password&quot; property." /><property name="subject-match" name_upper="SUBJECT_MATCH" type="string" description="Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match." /><property name="system-ca-certs" name_upper="SYSTEM_CA_CERTS" type="boolean" default="FALSE" description="When TRUE, overrides the &quot;ca-path&quot; and &quot;phase2-ca-path&quot; properties using the system CA directory specified at configure time with the --system-ca-path switch.  The certificates in this directory are added to the verification chain in addition to any certificates specified by the &quot;ca-cert&quot; and &quot;phase2-ca-cert&quot; properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides &quot;ca-cert&quot; and &quot;phase2-ca-cert&quot; properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant)." /></setting><setting name="adsl" description="ADSL Settings" name_upper="ADSL"><property name="encapsulation" name_upper="ENCAPSULATION" type="string" description="Encapsulation of ADSL connection.  Can be &quot;vcmux&quot; or &quot;llc&quot;." /><property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the ADSL service." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="protocol" name_upper="PROTOCOL" type="string" description="ADSL connection protocol.  Can be &quot;pppoa&quot;, &quot;pppoe&quot; or &quot;ipoatm&quot;." /><property name="username" name_upper="USERNAME" type="string" description="Username used to authenticate with the ADSL service." /><property name="vci" name_upper="VCI" type="uint32" default="0" description="VCI of ADSL connection" /><property name="vpi" name_upper="VPI" type="uint32" default="0" description="VPI of ADSL connection" /></setting><setting name="bluetooth" description="Bluetooth Settings" name_upper="BLUETOOTH"><property name="bdaddr" name_upper="BDADDR" type="byte array" description="The Bluetooth address of the device." /><property name="type" name_upper="TYPE" type="string" description="Either &quot;dun&quot; for Dial-Up Networking connections or &quot;panu&quot; for Personal Area Networking connections to devices supporting the NAP profile." /></setting><setting name="bond" description="Bonding Settings" name_upper="BOND"><property name="options" name_upper="OPTIONS" type="dict of string to string" default="{'mode': 'balance-rr'}" description="Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." /></setting><setting name="bridge" description="Bridging Settings" name_upper="BRIDGE"><property name="ageing-time" name_upper="AGEING_TIME" type="uint32" default="300" description="The Ethernet MAC address aging time, in seconds." /><property name="forward-delay" name_upper="FORWARD_DELAY" type="uint32" default="15" description="The Spanning Tree Protocol (STP) forwarding delay, in seconds." /><property name="group-address" name_upper="GROUP_ADDRESS" type="byte array" description="If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00." /><property name="group-forward-mask" name_upper="GROUP_FORWARD_MASK" type="uint32" default="0" description="A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP." /><property name="hello-time" name_upper="HELLO_TIME" type="uint32" default="2" description="The Spanning Tree Protocol (STP) hello time, in seconds." /><property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the &quot;ethernet.cloned-mac-address&quot; is referred instead to generate the initial MAC address. Note that setting &quot;ethernet.cloned-mac-address&quot; anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1" /><property name="max-age" name_upper="MAX_AGE" type="uint32" default="20" description="The Spanning Tree Protocol (STP) maximum message age, in seconds." /><property name="multicast-hash-max" name_upper="MULTICAST_HASH_MAX" type="uint32" default="4096" description="Set maximum size of multicast hash table (value must be a power of 2)." /><property name="multicast-last-member-count" name_upper="MULTICAST_LAST_MEMBER_COUNT" type="uint32" default="2" description="Set the number of queries the bridge will send before stopping forwarding a multicast group after a &quot;leave&quot; message has been received." /><property name="multicast-last-member-interval" name_upper="MULTICAST_LAST_MEMBER_INTERVAL" type="uint64" default="100" description="Set interval (in deciseconds) between queries to find remaining members of a group, after a &quot;leave&quot; message is received." /><property name="multicast-membership-interval" name_upper="MULTICAST_MEMBERSHIP_INTERVAL" type="uint64" default="26000" description="Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received." /><property name="multicast-querier" name_upper="MULTICAST_QUERIER" type="boolean" default="FALSE" description="Enable or disable sending of multicast queries by the bridge. If not specified the option is disabled." /><property name="multicast-querier-interval" name_upper="MULTICAST_QUERIER_INTERVAL" type="uint64" default="25500" description="If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries." /><property name="multicast-query-interval" name_upper="MULTICAST_QUERY_INTERVAL" type="uint64" default="12500" description="Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase." /><property name="multicast-query-response-interval" name_upper="MULTICAST_QUERY_RESPONSE_INTERVAL" type="uint64" default="1000" description="Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge." /><property name="multicast-query-use-ifaddr" name_upper="MULTICAST_QUERY_USE_IFADDR" type="boolean" default="FALSE" description="If enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used." /><property name="multicast-router" name_upper="MULTICAST_ROUTER" type="string" description="Sets bridge's multicast router. Multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled' to which kernel assigns the numbers 1, 0, and 2, respectively. If not specified the default value is 'auto' (1)." /><property name="multicast-snooping" name_upper="MULTICAST_SNOOPING" type="boolean" default="TRUE" description="Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved." /><property name="multicast-startup-query-count" name_upper="MULTICAST_STARTUP_QUERY_COUNT" type="uint32" default="2" description="Set the number of IGMP queries to send during startup phase." /><property name="multicast-startup-query-interval" name_upper="MULTICAST_STARTUP_QUERY_INTERVAL" type="uint64" default="3125" description="Sets the time (in deciseconds) between queries sent out at startup to determine membership information." /><property name="priority" name_upper="PRIORITY" type="uint32" default="32768" description="Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are &quot;better&quot;; the lowest priority bridge will be elected the root bridge." /><property name="stp" name_upper="STP" type="boolean" default="TRUE" description="Controls whether Spanning Tree Protocol (STP) is enabled for this bridge." /><property name="vlan-default-pvid" name_upper="VLAN_DEFAULT_PVID" type="uint32" default="1" description="The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames." /><property name="vlan-filtering" name_upper="VLAN_FILTERING" type="boolean" default="FALSE" description="Control whether VLAN filtering is enabled on the bridge." /><property name="vlan-protocol" name_upper="VLAN_PROTOCOL" type="string" description="If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'." /><property name="vlan-stats-enabled" name_upper="VLAN_STATS_ENABLED" type="boolean" default="FALSE" description="Controls whether per-VLAN stats accounting is enabled." /><property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." /></setting><setting name="bridge-port" description="Bridge Port Settings" name_upper="BRIDGE_PORT"><property name="hairpin-mode" name_upper="HAIRPIN_MODE" type="boolean" default="FALSE" description="Enables or disables &quot;hairpin mode&quot; for the port, which allows frames to be sent back out through the port the frame was received on." /><property name="path-cost" name_upper="PATH_COST" type="uint32" default="100" description="The Spanning Tree Protocol (STP) port cost for destinations via this port." /><property name="priority" name_upper="PRIORITY" type="uint32" default="32" description="The Spanning Tree Protocol (STP) priority of this bridge port." /><property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." /></setting><setting name="cdma" description="CDMA-based Mobile Broadband Settings" name_upper="CDMA"><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="number" name_upper="NUMBER" type="string" description="The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required." /><property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="username" name_upper="USERNAME" type="string" description="The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here." /></setting><setting name="dcb" description="Data Center Bridging Settings" name_upper="DCB"><property name="app-fcoe-flags" name_upper="APP_FCOE_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-fcoe-mode" name_upper="APP_FCOE_MODE" type="string" description="The FCoE controller mode; either &quot;fabric&quot; or &quot;vn2vn&quot;. Since 1.34, NULL is the default and means &quot;fabric&quot;. Before 1.34, NULL was rejected as invalid and the default was &quot;fabric&quot;." /><property name="app-fcoe-priority" name_upper="APP_FCOE_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the &quot;app-fcoe-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="app-fip-flags" name_upper="APP_FIP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-fip-priority" name_upper="APP_FIP_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the &quot;app-fip-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="app-iscsi-flags" name_upper="APP_ISCSI_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-iscsi-priority" name_upper="APP_ISCSI_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the &quot;app-iscsi-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." /><property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." /><property name="priority-flow-control-flags" name_upper="PRIORITY_FLOW_CONTROL_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." /><property name="priority-group-flags" name_upper="PRIORITY_GROUP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." /><property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." /><property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." /></setting><setting name="dummy" description="Dummy Link Settings" name_upper="DUMMY" /><setting name="ethtool" description="Ethtool Ethernet Settings" name_upper="ETHTOOL" /><setting name="generic" description="Generic Link Settings" name_upper="GENERIC" /><setting name="gsm" description="GSM-based Mobile Broadband Settings" name_upper="GSM"><property name="apn" name_upper="APN" type="string" description="The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9." /><property name="auto-config" name_upper="AUTO_CONFIG" type="boolean" default="FALSE" description="When TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database." /><property name="device-id" name_upper="DEVICE_ID" type="string" description="The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device." /><property name="home-only" name_upper="HOME_ONLY" type="boolean" default="FALSE" description="When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="network-id" name_upper="NETWORK_ID" type="string" description="The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible." /><property name="number" name_upper="NUMBER" type="string" description="Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1" /><property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="pin" name_upper="PIN" type="string" description="If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device." /><property name="pin-flags" name_upper="PIN_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;pin&quot; property." /><property name="sim-id" name_upper="SIM_ID" type="string" description="The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by &quot;device-id&quot; which contains a SIM card matching the given identifier." /><property name="sim-operator-id" name_upper="SIM_OPERATOR_ID" type="string" description="A MCC/MNC string like &quot;310260&quot; or &quot;21601&quot; identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by &quot;device-id&quot; and &quot;sim-id&quot; which contains a SIM card provisioned by the given operator." /><property name="username" name_upper="USERNAME" type="string" description="The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here." /></setting><setting name="infiniband" description="Infiniband Settings" name_upper="INFINIBAND"><property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="p-key" name_upper="P_KEY" type="int32" default="-1" description="The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka &quot;the P_Key at index 0&quot;). Otherwise, it is a 16-bit unsigned integer, whose high bit is set if it is a &quot;full membership&quot; P_Key." /><property name="parent" name_upper="PARENT" type="string" description="The interface name of the parent device of this device. Normally NULL, but if the &quot;p_key&quot; property is set, then you must specify the base device by setting either this property or &quot;mac-address&quot;." /><property name="transport-mode" name_upper="TRANSPORT_MODE" type="string" description="The IP-over-InfiniBand transport mode. Either &quot;datagram&quot; or &quot;connected&quot;." /></setting><setting name="ipv4" description="IPv4 Settings" name_upper="IP4_CONFIG"><property name="addresses" name_upper="ADDRESSES" type="a comma separated list of addresses" description="A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by comma. For example &quot;192.168.1.5/24, 10.1.0.5/24&quot;. The addresses are listed in decreasing priority, meaning the first address will be the primary address." /><property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." /><property name="dhcp-client-id" name_upper="DHCP_CLIENT_ID" type="string" description="A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values &quot;mac&quot; and &quot;perm-mac&quot; are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value &quot;ipv6-duid&quot; uses the DUID from &quot;ipv6.dhcp-duid&quot; property as an RFC4361-compliant client identifier. As IAID it uses &quot;ipv4.dhcp-iaid&quot; and falls back to &quot;ipv6.dhcp-iaid&quot; if unset. The special value &quot;duid&quot; generates a RFC4361-compliant client identifier based on &quot;ipv4.dhcp-iaid&quot; and uses a DUID generated by hashing /etc/machine-id. The special value &quot;stable&quot; is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin." /><property name="dhcp-fqdn" name_upper="DHCP_FQDN" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-hostname&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname-flags" name_upper="DHCP_HOSTNAME_FLAGS" type="uint32" default="0" description="Flags for the DHCP hostname and FQDN. Currently, this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests." /><property name="dhcp-iaid" name_upper="DHCP_IAID" type="string" description="A string containing the &quot;Identity Association Identifier&quot; (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among &quot;mac&quot;, &quot;perm-mac&quot;, &quot;ifname&quot; and &quot;stable&quot;. When set to &quot;mac&quot; (or &quot;perm-mac&quot;), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to &quot;ifname&quot;, the IAID is computed by hashing the interface name. The special value &quot;stable&quot; can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be &quot;ifname&quot;. Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address." /><property name="dhcp-reject-servers" name_upper="DHCP_REJECT_SERVERS" type="array of string" description="Array of servers from which DHCP offers must be rejected. This property is useful to avoid getting a lease from misconfigured or rogue servers. For DHCPv4, each element must be an IPv4 address, optionally followed by a slash and a prefix length (e.g. &quot;192.168.122.0/24&quot;). This property is currently not implemented for DHCPv6." /><property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." /><property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity." /><property name="dhcp-vendor-class-identifier" name_upper="DHCP_VENDOR_CLASS_IDENTIFIER" type="string" description="The Vendor Class Identifier DHCP option (60). Special characters in the data string may be escaped using C-style escapes, nevertheless this property cannot contain nul bytes. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the DHCP option is not sent to the server. Since 1.28" /><property name="dns" name_upper="DNS" type="array of uint32" description="Array of IP addresses of DNS servers." /><property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are &quot;attempts&quot;, &quot;debug&quot;, &quot;edns0&quot;, &quot;inet6&quot;, &quot;ip6-bytestring&quot;, &quot;ip6-dotint&quot;, &quot;ndots&quot;, &quot;no-check-names&quot;, &quot;no-ip6-dotint&quot;, &quot;no-reload&quot;, &quot;no-tld-query&quot;, &quot;rotate&quot;, &quot;single-request&quot;, &quot;single-request-reopen&quot;, &quot;timeout&quot;, &quot;trust-ad&quot;, &quot;use-vc&quot;. The &quot;trust-ad&quot; setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have &quot;trust-ad&quot; enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then &quot;edns0&quot; and &quot;trust-ad&quot; are automatically added." /><property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the &quot;rotate&quot; option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured." /><property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting." /><property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with &quot;never-default&quot; and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length." /><property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured name servers and search domains are ignored and only name servers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." /><property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." /><property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." /><property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." /><property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." /><property name="required-timeout" name_upper="REQUIRED_TIMEOUT" type="int32" default="-1" description="The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e.g. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active. Note that if &quot;may-fail&quot; is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout. A zero value means that no required timeout is present, -1 means the default value (either configuration ipvx.required-timeout override or zero)." /><property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." /><property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." /><property name="routes" name_upper="ROUTES" type="a comma separated list of routes" description="A list of IPv4 destination addresses, prefix length, optional IPv4 next hop addresses, optional route metric, optional attribute. The valid syntax is: &quot;ip[/prefix] [next-hop] [metric] [attribute=val]...[,ip[/prefix]...]&quot;. For example &quot;192.0.2.0/24 10.1.1.1 77, 198.51.100.0/24&quot;." /></setting><setting name="ipv6" description="IPv6 Settings" name_upper="IP6_CONFIG"><property name="addr-gen-mode" name_upper="ADDR_GEN_MODE" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." /><property name="addresses" name_upper="ADDRESSES" type="a comma separated list of addresses" description="A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by comma. For example &quot;2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64&quot;. The addresses are listed in increasing priority, meaning the last address will be the primary address." /><property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." /><property name="dhcp-duid" name_upper="DHCP_DUID" type="string" description="A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value &quot;lease&quot; will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and &quot;dhclient&quot; is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values &quot;llt&quot; and &quot;ll&quot; will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values &quot;stable-llt&quot;, &quot;stable-ll&quot; and &quot;stable-uuid&quot; will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of &quot;stable-ll&quot; and &quot;stable-llt&quot; will be a generated address derived from the stable id. The DUID-LLT time value in the &quot;stable-llt&quot; option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in &quot;llt&quot;). When the property is unset, the global value provided for &quot;ipv6.dhcp-duid&quot; is used. If no global value is provided, the default &quot;lease&quot; value is assumed." /><property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname-flags" name_upper="DHCP_HOSTNAME_FLAGS" type="uint32" default="0" description="Flags for the DHCP hostname and FQDN. Currently, this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests." /><property name="dhcp-iaid" name_upper="DHCP_IAID" type="string" description="A string containing the &quot;Identity Association Identifier&quot; (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among &quot;mac&quot;, &quot;perm-mac&quot;, &quot;ifname&quot; and &quot;stable&quot;. When set to &quot;mac&quot; (or &quot;perm-mac&quot;), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to &quot;ifname&quot;, the IAID is computed by hashing the interface name. The special value &quot;stable&quot; can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be &quot;ifname&quot;. Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address." /><property name="dhcp-reject-servers" name_upper="DHCP_REJECT_SERVERS" type="array of string" description="Array of servers from which DHCP offers must be rejected. This property is useful to avoid getting a lease from misconfigured or rogue servers. For DHCPv4, each element must be an IPv4 address, optionally followed by a slash and a prefix length (e.g. &quot;192.168.122.0/24&quot;). This property is currently not implemented for DHCPv6." /><property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." /><property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity." /><property name="dns" name_upper="DNS" type="array of byte array" description="Array of IP addresses of DNS servers." /><property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are &quot;attempts&quot;, &quot;debug&quot;, &quot;edns0&quot;, &quot;inet6&quot;, &quot;ip6-bytestring&quot;, &quot;ip6-dotint&quot;, &quot;ndots&quot;, &quot;no-check-names&quot;, &quot;no-ip6-dotint&quot;, &quot;no-reload&quot;, &quot;no-tld-query&quot;, &quot;rotate&quot;, &quot;single-request&quot;, &quot;single-request-reopen&quot;, &quot;timeout&quot;, &quot;trust-ad&quot;, &quot;use-vc&quot;. The &quot;trust-ad&quot; setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have &quot;trust-ad&quot; enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then &quot;edns0&quot; and &quot;trust-ad&quot; are automatically added." /><property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the &quot;rotate&quot; option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured." /><property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting." /><property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with &quot;never-default&quot; and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length." /><property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured name servers and search domains are ignored and only name servers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." /><property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." /><property name="ip6-privacy" name_upper="IP6_PRIVACY" type="NMSettingIP6ConfigPrivacy (int32)" description="Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to &quot;-1&quot; (unknown) means fallback to global configuration &quot;ipv6.ip6-privacy&quot;. If also global configuration is unspecified or set to &quot;-1&quot;, fallback to read &quot;/proc/sys/net/ipv6/conf/default/use_tempaddr&quot;. Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the &quot;addr-gen-mode&quot; property's &quot;stable-privacy&quot; setting as another way of avoiding host tracking with IPv6 addresses." /><property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." /><property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." /><property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." /><property name="ra-timeout" name_upper="RA_TIMEOUT" type="int32" default="0" description="A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity." /><property name="required-timeout" name_upper="REQUIRED_TIMEOUT" type="int32" default="-1" description="The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e.g. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active. Note that if &quot;may-fail&quot; is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout. A zero value means that no required timeout is present, -1 means the default value (either configuration ipvx.required-timeout override or zero)." /><property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." /><property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." /><property name="routes" name_upper="ROUTES" type="array of legacy IPv6 route struct" description="Array of IP routes." /><property name="token" name_upper="TOKEN" type="string" description="Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode." /></setting><setting name="ip-tunnel" description="IP Tunneling Settings" name_upper="IP_TUNNEL"><property name="encapsulation-limit" name_upper="ENCAPSULATION_LIMIT" type="uint32" default="0" description="How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels." /><property name="flags" name_upper="FLAGS" type="uint32" default="0" description="Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels." /><property name="flow-label" name_upper="FLOW_LABEL" type="uint32" default="0" description="The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels." /><property name="input-key" name_upper="INPUT_KEY" type="string" description="The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." /><property name="local" name_upper="LOCAL" type="string" description="The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address." /><property name="mode" name_upper="MODE" type="uint32" default="0" description="The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2)." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments." /><property name="output-key" name_upper="OUTPUT_KEY" type="string" description="The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface." /><property name="path-mtu-discovery" name_upper="PATH_MTU_DISCOVERY" type="boolean" default="TRUE" description="Whether to enable Path MTU Discovery on this tunnel." /><property name="remote" name_upper="REMOTE" type="string" description="The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address." /><property name="tos" name_upper="TOS" type="uint32" default="0" description="The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets." /><property name="ttl" name_upper="TTL" type="uint32" default="0" description="The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value." /></setting><setting name="macsec" description="MACSec Settings" name_upper="MACSEC"><property name="encrypt" name_upper="ENCRYPT" type="boolean" default="TRUE" description="Whether the transmitted traffic must be encrypted." /><property name="mka-cak" name_upper="MKA_CAK" type="string" description="The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement." /><property name="mka-cak-flags" name_upper="MKA_CAK_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;mka-cak&quot; property." /><property name="mka-ckn" name_upper="MKA_CKN" type="string" description="The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement." /><property name="mode" name_upper="MODE" type="int32" default="0" description="Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." /><property name="port" name_upper="PORT" type="int32" default="1" description="The port component of the SCI (Secure Channel Identifier), between 1 and 65534." /><property name="send-sci" name_upper="SEND_SCI" type="boolean" default="TRUE" description="Specifies whether the SCI (Secure Channel Identifier) is included in every packet." /><property name="validation" name_upper="VALIDATION" type="int32" default="2" description="Specifies the validation mode for incoming frames." /></setting><setting name="macvlan" description="MAC VLAN Settings" name_upper="MACVLAN"><property name="mode" name_upper="MODE" type="uint32" default="0" description="The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." /><property name="promiscuous" name_upper="PROMISCUOUS" type="boolean" default="TRUE" description="Whether the interface should be put in promiscuous mode." /><property name="tap" name_upper="TAP" type="boolean" default="FALSE" description="Whether the interface should be a MACVTAP." /></setting><setting name="match" description="Match settings" name_upper="MATCH"><property name="driver" name_upper="DRIVER" type="array of string" description="A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the pattern." /><property name="interface-name" name_upper="INTERFACE_NAME" type="array of string" description="A list of interface names to match. Each element is a shell wildcard pattern. An element can be prefixed with a pipe symbol (|) or an ampersand (&amp;). The former means that the element is optional and the latter means that it is mandatory. If there are any optional elements, than the match evaluates to true if at least one of the optional element matches (logical OR). If there are any mandatory elements, then they all must match (logical AND). By default, an element is optional. This means that an element &quot;foo&quot; behaves the same as &quot;|foo&quot;. An element can also be inverted with exclamation mark (!) between the pipe symbol (or the ampersand) and before the pattern. Note that &quot;!foo&quot; is a shortcut for the mandatory match &quot;&amp;!foo&quot;. Finally, a backslash can be used at the beginning of the element (after the optional special characters) to escape the start of the pattern. For example, &quot;&amp;\\!a&quot; is an mandatory match for literally &quot;!a&quot;." /><property name="kernel-command-line" name_upper="KERNEL_COMMAND_LINE" type="array of string" description="A list of kernel command line arguments to match. This may be used to check whether a specific kernel command line option is set (or unset, if prefixed with the exclamation mark). The argument must either be a single word, or an assignment (i.e. two words, joined by &quot;=&quot;). In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is looked for with right and left hand side matching. Wildcard patterns are not supported. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the match." /><property name="path" name_upper="PATH" type="array of string" description="A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form &quot;pci-$domain:$bus:$device.$function&quot;, where each variable is an hexadecimal value; for example &quot;pci-0000:0a:00.0&quot;. The path of a device can be obtained with &quot;udevadm info /sys/class/net/$dev | grep ID_PATH=&quot; or by looking at the &quot;path&quot; property exported by NetworkManager (&quot;nmcli -f general.path device show $dev&quot;). Each element of the list is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the pattern." /></setting><setting name="802-11-olpc-mesh" description="OLPC Wireless Mesh Settings" name_upper="OLPC_MESH"><property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Channel on which the mesh network to join is located." /><property name="dhcp-anycast-address" name_upper="DHCP_ANYCAST_ADDRESS" type="byte array" description="Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request. This is currently only implemented by dhclient DHCP plugin." /><property name="ssid" name_upper="SSID" type="byte array" description="SSID of the mesh network to join." /></setting><setting name="ovs-bridge" description="OvsBridge Link Settings" name_upper="OVS_BRIDGE"><property name="datapath-type" name_upper="DATAPATH_TYPE" type="string" description="The data path type. One of &quot;system&quot;, &quot;netdev&quot; or empty." /><property name="fail-mode" name_upper="FAIL_MODE" type="string" description="The bridge failure mode. One of &quot;secure&quot;, &quot;standalone&quot; or empty." /><property name="mcast-snooping-enable" name_upper="MCAST_SNOOPING_ENABLE" type="boolean" default="FALSE" description="Enable or disable multicast snooping." /><property name="rstp-enable" name_upper="RSTP_ENABLE" type="boolean" default="FALSE" description="Enable or disable RSTP." /><property name="stp-enable" name_upper="STP_ENABLE" type="boolean" default="FALSE" description="Enable or disable STP." /></setting><setting name="ovs-dpdk" description="OvsDpdk Link Settings" name_upper="OVS_DPDK"><property name="devargs" name_upper="DEVARGS" type="string" description="Open vSwitch DPDK device arguments." /></setting><setting name="ovs-interface" description="Open vSwitch Interface Settings" name_upper="OVS_INTERFACE"><property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, &quot;system&quot;, &quot;patch&quot;, &quot;dpdk&quot;, or empty." /></setting><setting name="ovs-patch" description="OvsPatch Link Settings" name_upper="OVS_PATCH"><property name="peer" name_upper="PEER" type="string" description="Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer." /></setting><setting name="ovs-port" description="OvsPort Link Settings" name_upper="OVS_PORT"><property name="bond-downdelay" name_upper="BOND_DOWNDELAY" type="uint32" default="0" description="The time port must be inactive in order to be considered down." /><property name="bond-mode" name_upper="BOND_MODE" type="string" description="Bonding mode. One of &quot;active-backup&quot;, &quot;balance-slb&quot;, or &quot;balance-tcp&quot;." /><property name="bond-updelay" name_upper="BOND_UPDELAY" type="uint32" default="0" description="The time port must be active before it starts forwarding traffic." /><property name="lacp" name_upper="LACP" type="string" description="LACP mode. One of &quot;active&quot;, &quot;off&quot;, or &quot;passive&quot;." /><property name="tag" name_upper="TAG" type="uint32" default="0" description="The VLAN tag in the range 0-4095." /><property name="vlan-mode" name_upper="VLAN_MODE" type="string" description="The VLAN mode. One of &quot;access&quot;, &quot;native-tagged&quot;, &quot;native-untagged&quot;, &quot;trunk&quot; or unset." /></setting><setting name="ppp" description="Point-to-Point Protocol Settings" name_upper="PPP"><property name="baud" name_upper="BAUD" type="uint32" default="0" description="If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed." /><property name="crtscts" name_upper="CRTSCTS" type="boolean" default="FALSE" description="If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals.  This value should normally be set to FALSE." /><property name="lcp-echo-failure" name_upper="LCP_ECHO_FAILURE" type="uint32" default="0" description="If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer.  The &quot;lcp-echo-interval&quot; property must also be set to a non-zero value if this property is used." /><property name="lcp-echo-interval" name_upper="LCP_ECHO_INTERVAL" type="uint32" default="0" description="If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value).  Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this." /><property name="mppe-stateful" name_upper="MPPE_STATEFUL" type="boolean" default="FALSE" description="If TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE." /><property name="mru" name_upper="MRU" type="uint32" default="0" description="If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, instruct pppd to send packets no larger than the specified size." /><property name="no-vj-comp" name_upper="NO_VJ_COMP" type="boolean" default="FALSE" description="If TRUE, Van Jacobsen TCP header compression will not be requested." /><property name="noauth" name_upper="NOAUTH" type="boolean" default="TRUE" description="If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE." /><property name="nobsdcomp" name_upper="NOBSDCOMP" type="boolean" default="FALSE" description="If TRUE, BSD compression will not be requested." /><property name="nodeflate" name_upper="NODEFLATE" type="boolean" default="FALSE" description="If TRUE, &quot;deflate&quot; compression will not be requested." /><property name="refuse-chap" name_upper="REFUSE_CHAP" type="boolean" default="FALSE" description="If TRUE, the CHAP authentication method will not be used." /><property name="refuse-eap" name_upper="REFUSE_EAP" type="boolean" default="FALSE" description="If TRUE, the EAP authentication method will not be used." /><property name="refuse-mschap" name_upper="REFUSE_MSCHAP" type="boolean" default="FALSE" description="If TRUE, the MSCHAP authentication method will not be used." /><property name="refuse-mschapv2" name_upper="REFUSE_MSCHAPV2" type="boolean" default="FALSE" description="If TRUE, the MSCHAPv2 authentication method will not be used." /><property name="refuse-pap" name_upper="REFUSE_PAP" type="boolean" default="FALSE" description="If TRUE, the PAP authentication method will not be used." /><property name="require-mppe" name_upper="REQUIRE_MPPE" type="boolean" default="FALSE" description="If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections." /><property name="require-mppe-128" name_upper="REQUIRE_MPPE_128" type="boolean" default="FALSE" description="If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the &quot;require-mppe&quot; property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail." /></setting><setting name="pppoe" description="PPP-over-Ethernet Settings" name_upper="PPPOE"><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in &quot;interface-name&quot; of NMSettingConnection." /><property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the PPPoE service." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="service" name_upper="SERVICE" type="string" description="If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required." /><property name="username" name_upper="USERNAME" type="string" description="Username used to authenticate with the PPPoE service." /></setting><setting name="proxy" description="WWW Proxy Settings" name_upper="PROXY"><property name="browser-only" name_upper="BROWSER_ONLY" type="boolean" default="FALSE" description="Whether the proxy configuration is for browser only." /><property name="method" name_upper="METHOD" type="int32" default="0" description="Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)" /><property name="pac-script" name_upper="PAC_SCRIPT" type="string" description="PAC script for the connection." /><property name="pac-url" name_upper="PAC_URL" type="string" description="PAC URL for obtaining PAC file." /></setting><setting name="serial" description="Serial Link Settings" name_upper="SERIAL"><property name="baud" name_upper="BAUD" type="uint32" default="57600" description="Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed." /><property name="bits" name_upper="BITS" type="uint32" default="8" description="Byte-width of the serial communication. The 8 in &quot;8n1&quot; for example." /><property name="parity" name_upper="PARITY" type="NMSettingSerialParity (byte)" description="Parity setting of the serial port." /><property name="send-delay" name_upper="SEND_DELAY" type="uint64" default="0" description="Time to delay between each byte sent to the modem, in microseconds." /><property name="stopbits" name_upper="STOPBITS" type="uint32" default="1" description="Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in &quot;8n1&quot; for example." /></setting><setting name="sriov" description="SR-IOV settings" name_upper="SRIOV"><property name="autoprobe-drivers" name_upper="AUTOPROBE_DRIVERS" type="NMTernary (int32)" description="Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1)." /><property name="total-vfs" name_upper="TOTAL_VFS" type="uint32" default="0" description="The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection." /><property name="vfs" name_upper="VFS" type="array of vardict" description="Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: &quot;INDEX [ATTR=VALUE[ ATTR=VALUE]...]&quot;. for example: &quot;2 mac=00:11:22:33:44:55 spoof-check=true&quot;. Multiple VFs can be specified using a comma as separator. Currently, the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The &quot;vlans&quot; attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form &quot;ID[.PRIORITY[.PROTO]]&quot;. PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad." /></setting><setting name="tc" description="Linux Traffic Control Settings" name_upper="TC_CONFIG"><property name="qdiscs" name_upper="QDISCS" type="GPtrArray(NMTCQdisc)" description="Array of TC queueing disciplines. When the &quot;tc&quot; setting is present, qdiscs from this property are applied upon activation. If the property is empty, all qdiscs are removed and the device will only have the default qdisc assigned by kernel according to the &quot;net.core.default_qdisc&quot; sysctl. If the &quot;tc&quot; setting is not present, NetworkManager doesn't touch the qdiscs present on the interface."><description-docbook>
+<nm-setting-docs><setting name="connection" description="General Connection Profile Settings" name_upper="CONNECTION"><property name="auth-retries" name_upper="AUTH_RETRIES" type="int32" default="-1" description="The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently, this only applies to 802-1x authentication." /><property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description="Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See &quot;secondaries&quot; as an alternative to automatically connect VPN profiles." /><property name="autoconnect-priority" name_upper="AUTOCONNECT_PRIORITY" type="int32" default="0" description="The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen." /><property name="autoconnect-retries" name_upper="AUTOCONNECT_RETRIES" type="int32" default="-1" description="The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again." /><property name="autoconnect-slaves" name_upper="AUTOCONNECT_SLAVES" type="NMSettingConnectionAutoconnectSlaves (int32)" description="Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties &quot;autoconnect&quot;, &quot;autoconnect-priority&quot; and &quot;autoconnect-retries&quot; are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0." /><property name="dns-over-tls" name_upper="DNS_OVER_TLS" type="int32" default="-1" description="Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: &quot;yes&quot; (2) use DNSOverTls and disabled fallback, &quot;opportunistic&quot; (1) use DNSOverTls but allow fallback to unencrypted resolution, &quot;no&quot; (0) don't ever use DNSOverTls. If unspecified &quot;default&quot; depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="gateway-ping-timeout" name_upper="GATEWAY_PING_TIMEOUT" type="uint32" default="0" description="If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping." /><property name="id" name_upper="ID" type="string" description="A human readable unique identifier for the connection, like &quot;Work Wi-Fi&quot; or &quot;T-Mobile 3G&quot;." /><property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface." /><property name="lldp" name_upper="LLDP" type="int32" default="-1" description="Whether LLDP is enabled for the connection." /><property name="llmnr" name_upper="LLMNR" type="int32" default="-1" description="Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: &quot;yes&quot; (2) register hostname and resolving for the connection, &quot;no&quot; (0) disable LLMNR for the interface, &quot;resolve&quot; (1) do not register hostname but allow resolving of LLMNR host names If unspecified, &quot;default&quot; ultimately depends on the DNS plugin (which for systemd-resolved currently means &quot;yes&quot;). This feature requires a plugin which supports LLMNR. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="master" name_upper="MASTER" type="string" description="Interface name of the master device or UUID of the master connection." /><property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: &quot;yes&quot; (2) register hostname and resolving for the connection, &quot;no&quot; (0) disable mDNS for the interface, &quot;resolve&quot; (1) do not register hostname but allow resolving of mDNS host names and &quot;default&quot; (-1) to allow lookup of a global default in NetworkManager.conf. If unspecified, &quot;default&quot; ultimately depends on the DNS plugin (which for systemd-resolved currently means &quot;no&quot;). This feature requires a plugin which supports mDNS. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." /><property name="metered" name_upper="METERED" type="NMMetered (int32)" description="Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately." /><property name="mud-url" name_upper="MUD_URL" type="string" description="If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with &quot;https://&quot;. The special value &quot;none&quot; is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is &quot;none&quot;." /><property name="multi-connect" name_upper="MULTI_CONNECT" type="int32" default="0" description="Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect." /><property name="permissions" name_upper="PERMISSIONS" type="array of string" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." /><property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." /><property name="secondaries" name_upper="SECONDARIES" type="array of string" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently, only VPN connections are supported." /><property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." /><property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret-key. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${MAC}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds to the interface name of the device and &quot;${MAC}&quot; is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." /><property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." /><property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." /><property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." /><property name="wait-device-timeout" name_upper="WAIT_DEVICE_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. This works by waiting for the given timeout until a compatible device for the profile is available and managed. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time." /><property name="zone" name_upper="ZONE" type="string" description="The trust level of a the connection.  Free form case-insensitive string (for example &quot;Home&quot;, &quot;Work&quot;, &quot;Public&quot;).  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately." /></setting><setting name="6lowpan" description="6LoWPAN Settings" name_upper="6LOWPAN"><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created." /></setting><setting name="802-1x" description="IEEE 802.1x Authentication Settings" name_upper="802_1X"><property name="altsubject-matches" name_upper="ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed." /><property name="anonymous-identity" name_upper="ANONYMOUS_IDENTITY" type="string" description="Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS." /><property name="auth-timeout" name_upper="AUTH_TIMEOUT" type="int32" default="0" description="A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds." /><property name="ca-cert" name_upper="CA_CERT" type="byte array" description="Contains the CA certificate if used by the EAP method specified in the &quot;eap&quot; property. Certificate data is specified using a &quot;scheme&quot;; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory." /><property name="ca-cert-password" name_upper="CA_CERT_PASSWORD" type="string" description="The password used to access the CA certificate stored in &quot;ca-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="ca-cert-password-flags" name_upper="CA_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;ca-cert-password&quot; property." /><property name="ca-path" name_upper="CA_PATH" type="string" description="UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the &quot;ca-cert&quot; property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored." /><property name="client-cert" name_upper="CLIENT_CERT" type="byte array" description="Contains the client certificate if used by the EAP method specified in the &quot;eap&quot; property. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte." /><property name="client-cert-password" name_upper="CLIENT_CERT_PASSWORD" type="string" description="The password used to access the client certificate stored in &quot;client-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="client-cert-password-flags" name_upper="CLIENT_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;client-cert-password&quot; property." /><property name="domain-match" name_upper="DOMAIN_MATCH" type="string" description="Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="domain-suffix-match" name_upper="DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="eap" name_upper="EAP" type="array of string" description="The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: &quot;leap&quot;, &quot;md5&quot;, &quot;tls&quot;, &quot;peap&quot;, &quot;ttls&quot;, &quot;pwd&quot;, and &quot;fast&quot;.  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations." /><property name="identity" name_upper="IDENTITY" type="string" description="Identity string for EAP authentication methods.  Often the user's user or login name." /><property name="optional" name_upper="OPTIONAL" type="boolean" default="FALSE" description="Whether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication." /><property name="pac-file" name_upper="PAC_FILE" type="string" description="UTF-8 encoded file path containing PAC for EAP-FAST." /><property name="password" name_upper="PASSWORD" type="string" description="UTF-8 encoded password used for EAP authentication methods. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="password-raw" name_upper="PASSWORD_RAW" type="byte array" description="Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." /><property name="password-raw-flags" name_upper="PASSWORD_RAW_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password-raw&quot; property." /><property name="phase1-auth-flags" name_upper="PHASE1_AUTH_FLAGS" type="uint32" default="0" description="Specifies authentication flags to use in &quot;phase 1&quot; outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details." /><property name="phase1-fast-provisioning" name_upper="PHASE1_FAST_PROVISIONING" type="string" description="Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the &quot;eap&quot; property. Recognized values are &quot;0&quot; (disabled), &quot;1&quot; (allow unauthenticated provisioning), &quot;2&quot; (allow authenticated provisioning), and &quot;3&quot; (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details." /><property name="phase1-peaplabel" name_upper="PHASE1_PEAPLABEL" type="string" description="Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to &quot;1&quot; to force use of the new PEAP label.  See the wpa_supplicant documentation for more details." /><property name="phase1-peapver" name_upper="PHASE1_PEAPVER" type="string" description="Forces which PEAP version is used when PEAP is set as the EAP method in the &quot;eap&quot; property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to &quot;0&quot; or &quot;1&quot; to force that specific PEAP version." /><property name="phase2-altsubject-matches" name_upper="PHASE2_ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed." /><property name="phase2-auth" name_upper="PHASE2_AUTH" type="string" description="Specifies the allowed &quot;phase 2&quot; inner authentication method when an EAP method that uses an inner TLS tunnel is specified in the &quot;eap&quot; property.  For TTLS this property selects one of the supported non-EAP inner methods: &quot;pap&quot;, &quot;chap&quot;, &quot;mschap&quot;, &quot;mschapv2&quot; while &quot;phase2-autheap&quot; selects an EAP inner method.  For PEAP this selects an inner EAP method, one of: &quot;gtc&quot;, &quot;otp&quot;, &quot;md5&quot; and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. Both &quot;phase2-auth&quot; and &quot;phase2-autheap&quot; cannot be specified." /><property name="phase2-autheap" name_upper="PHASE2_AUTHEAP" type="string" description="Specifies the allowed &quot;phase 2&quot; inner EAP-based authentication method when TTLS is specified in the &quot;eap&quot; property.  Recognized EAP-based &quot;phase 2&quot; methods are &quot;md5&quot;, &quot;mschapv2&quot;, &quot;otp&quot;, &quot;gtc&quot;, and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details." /><property name="phase2-ca-cert" name_upper="PHASE2_CA_CERT" type="byte array" description="Contains the &quot;phase 2&quot; CA certificate if used by the EAP method specified in the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; properties. Certificate data is specified using a &quot;scheme&quot;; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory." /><property name="phase2-ca-cert-password" name_upper="PHASE2_CA_CERT_PASSWORD" type="string" description="The password used to access the &quot;phase2&quot; CA certificate stored in &quot;phase2-ca-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="phase2-ca-cert-password-flags" name_upper="PHASE2_CA_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-ca-cert-password&quot; property." /><property name="phase2-ca-path" name_upper="PHASE2_CA_PATH" type="string" description="UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the &quot;phase2-ca-cert&quot; property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored." /><property name="phase2-client-cert" name_upper="PHASE2_CLIENT_CERT" type="byte array" description="Contains the &quot;phase 2&quot; client certificate if used by the EAP method specified in the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; properties. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended." /><property name="phase2-client-cert-password" name_upper="PHASE2_CLIENT_CERT_PASSWORD" type="string" description="The password used to access the &quot;phase2&quot; client certificate stored in &quot;phase2-client-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." /><property name="phase2-client-cert-password-flags" name_upper="PHASE2_CLIENT_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-client-cert-password&quot; property." /><property name="phase2-domain-match" name_upper="PHASE2_DOMAIN_MATCH" type="string" description="Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="phase2-domain-suffix-match" name_upper="PHASE2_DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a &quot;;&quot; delimited list." /><property name="phase2-private-key" name_upper="PHASE2_PRIVATE_KEY" type="byte array" description="Contains the &quot;phase 2&quot; inner private key when the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; property is set to &quot;tls&quot;. Key data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the &quot;phase2-private-key-password&quot; property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte, and as with the blob scheme the &quot;phase2-private-key-password&quot; property must be set to the password used to decode the PKCS#12 private key and certificate." /><property name="phase2-private-key-password" name_upper="PHASE2_PRIVATE_KEY_PASSWORD" type="string" description="The password used to decrypt the &quot;phase 2&quot; private key specified in the &quot;phase2-private-key&quot; property when the private key either uses the path scheme, or is a PKCS#12 format key." /><property name="phase2-private-key-password-flags" name_upper="PHASE2_PRIVATE_KEY_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;phase2-private-key-password&quot; property." /><property name="phase2-subject-match" name_upper="PHASE2_SUBJECT_MATCH" type="string" description="Substring to be matched against the subject of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match." /><property name="pin" name_upper="PIN" type="string" description="PIN used for EAP authentication methods." /><property name="pin-flags" name_upper="PIN_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;pin&quot; property." /><property name="private-key" name_upper="PRIVATE_KEY" type="byte array" description="Contains the private key when the &quot;eap&quot; property is set to &quot;tls&quot;. Key data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the &quot;private-key-password&quot; property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte, and as with the blob scheme the &quot;private-key-password&quot; property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: &quot;private-key&quot; is not a &quot;secret&quot; property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users.  Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data." /><property name="private-key-password" name_upper="PRIVATE_KEY_PASSWORD" type="string" description="The password used to decrypt the private key specified in the &quot;private-key&quot; property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key." /><property name="private-key-password-flags" name_upper="PRIVATE_KEY_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;private-key-password&quot; property." /><property name="subject-match" name_upper="SUBJECT_MATCH" type="string" description="Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match." /><property name="system-ca-certs" name_upper="SYSTEM_CA_CERTS" type="boolean" default="FALSE" description="When TRUE, overrides the &quot;ca-path&quot; and &quot;phase2-ca-path&quot; properties using the system CA directory specified at configure time with the --system-ca-path switch.  The certificates in this directory are added to the verification chain in addition to any certificates specified by the &quot;ca-cert&quot; and &quot;phase2-ca-cert&quot; properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides &quot;ca-cert&quot; and &quot;phase2-ca-cert&quot; properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant)." /></setting><setting name="adsl" description="ADSL Settings" name_upper="ADSL"><property name="encapsulation" name_upper="ENCAPSULATION" type="string" description="Encapsulation of ADSL connection.  Can be &quot;vcmux&quot; or &quot;llc&quot;." /><property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the ADSL service." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="protocol" name_upper="PROTOCOL" type="string" description="ADSL connection protocol.  Can be &quot;pppoa&quot;, &quot;pppoe&quot; or &quot;ipoatm&quot;." /><property name="username" name_upper="USERNAME" type="string" description="Username used to authenticate with the ADSL service." /><property name="vci" name_upper="VCI" type="uint32" default="0" description="VCI of ADSL connection" /><property name="vpi" name_upper="VPI" type="uint32" default="0" description="VPI of ADSL connection" /></setting><setting name="bluetooth" description="Bluetooth Settings" name_upper="BLUETOOTH"><property name="bdaddr" name_upper="BDADDR" type="byte array" description="The Bluetooth address of the device." /><property name="type" name_upper="TYPE" type="string" description="Either &quot;dun&quot; for Dial-Up Networking connections or &quot;panu&quot; for Personal Area Networking connections to devices supporting the NAP profile." /></setting><setting name="bond" description="Bonding Settings" name_upper="BOND"><property name="options" name_upper="OPTIONS" type="dict of string to string" default="{'mode': 'balance-rr'}" description="Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." /></setting><setting name="bridge" description="Bridging Settings" name_upper="BRIDGE"><property name="ageing-time" name_upper="AGEING_TIME" type="uint32" default="300" description="The Ethernet MAC address aging time, in seconds." /><property name="forward-delay" name_upper="FORWARD_DELAY" type="uint32" default="15" description="The Spanning Tree Protocol (STP) forwarding delay, in seconds." /><property name="group-address" name_upper="GROUP_ADDRESS" type="byte array" description="If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00." /><property name="group-forward-mask" name_upper="GROUP_FORWARD_MASK" type="uint32" default="0" description="A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP." /><property name="hello-time" name_upper="HELLO_TIME" type="uint32" default="2" description="The Spanning Tree Protocol (STP) hello time, in seconds." /><property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the &quot;ethernet.cloned-mac-address&quot; is referred instead to generate the initial MAC address. Note that setting &quot;ethernet.cloned-mac-address&quot; anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1" /><property name="max-age" name_upper="MAX_AGE" type="uint32" default="20" description="The Spanning Tree Protocol (STP) maximum message age, in seconds." /><property name="multicast-hash-max" name_upper="MULTICAST_HASH_MAX" type="uint32" default="4096" description="Set maximum size of multicast hash table (value must be a power of 2)." /><property name="multicast-last-member-count" name_upper="MULTICAST_LAST_MEMBER_COUNT" type="uint32" default="2" description="Set the number of queries the bridge will send before stopping forwarding a multicast group after a &quot;leave&quot; message has been received." /><property name="multicast-last-member-interval" name_upper="MULTICAST_LAST_MEMBER_INTERVAL" type="uint64" default="100" description="Set interval (in deciseconds) between queries to find remaining members of a group, after a &quot;leave&quot; message is received." /><property name="multicast-membership-interval" name_upper="MULTICAST_MEMBERSHIP_INTERVAL" type="uint64" default="26000" description="Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received." /><property name="multicast-querier" name_upper="MULTICAST_QUERIER" type="boolean" default="FALSE" description="Enable or disable sending of multicast queries by the bridge. If not specified the option is disabled." /><property name="multicast-querier-interval" name_upper="MULTICAST_QUERIER_INTERVAL" type="uint64" default="25500" description="If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries." /><property name="multicast-query-interval" name_upper="MULTICAST_QUERY_INTERVAL" type="uint64" default="12500" description="Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase." /><property name="multicast-query-response-interval" name_upper="MULTICAST_QUERY_RESPONSE_INTERVAL" type="uint64" default="1000" description="Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge." /><property name="multicast-query-use-ifaddr" name_upper="MULTICAST_QUERY_USE_IFADDR" type="boolean" default="FALSE" description="If enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used." /><property name="multicast-router" name_upper="MULTICAST_ROUTER" type="string" description="Sets bridge's multicast router. Multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled' to which kernel assigns the numbers 1, 0, and 2, respectively. If not specified the default value is 'auto' (1)." /><property name="multicast-snooping" name_upper="MULTICAST_SNOOPING" type="boolean" default="TRUE" description="Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved." /><property name="multicast-startup-query-count" name_upper="MULTICAST_STARTUP_QUERY_COUNT" type="uint32" default="2" description="Set the number of IGMP queries to send during startup phase." /><property name="multicast-startup-query-interval" name_upper="MULTICAST_STARTUP_QUERY_INTERVAL" type="uint64" default="3125" description="Sets the time (in deciseconds) between queries sent out at startup to determine membership information." /><property name="priority" name_upper="PRIORITY" type="uint32" default="32768" description="Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are &quot;better&quot;; the lowest priority bridge will be elected the root bridge." /><property name="stp" name_upper="STP" type="boolean" default="TRUE" description="Controls whether Spanning Tree Protocol (STP) is enabled for this bridge." /><property name="vlan-default-pvid" name_upper="VLAN_DEFAULT_PVID" type="uint32" default="1" description="The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames." /><property name="vlan-filtering" name_upper="VLAN_FILTERING" type="boolean" default="FALSE" description="Control whether VLAN filtering is enabled on the bridge." /><property name="vlan-protocol" name_upper="VLAN_PROTOCOL" type="string" description="If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'." /><property name="vlan-stats-enabled" name_upper="VLAN_STATS_ENABLED" type="boolean" default="FALSE" description="Controls whether per-VLAN stats accounting is enabled." /><property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." /></setting><setting name="bridge-port" description="Bridge Port Settings" name_upper="BRIDGE_PORT"><property name="hairpin-mode" name_upper="HAIRPIN_MODE" type="boolean" default="FALSE" description="Enables or disables &quot;hairpin mode&quot; for the port, which allows frames to be sent back out through the port the frame was received on." /><property name="path-cost" name_upper="PATH_COST" type="uint32" default="100" description="The Spanning Tree Protocol (STP) port cost for destinations via this port." /><property name="priority" name_upper="PRIORITY" type="uint32" default="32" description="The Spanning Tree Protocol (STP) priority of this bridge port." /><property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." /></setting><setting name="cdma" description="CDMA-based Mobile Broadband Settings" name_upper="CDMA"><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="number" name_upper="NUMBER" type="string" description="The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required." /><property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="username" name_upper="USERNAME" type="string" description="The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here." /></setting><setting name="dcb" description="Data Center Bridging Settings" name_upper="DCB"><property name="app-fcoe-flags" name_upper="APP_FCOE_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-fcoe-mode" name_upper="APP_FCOE_MODE" type="string" description="The FCoE controller mode; either &quot;fabric&quot; or &quot;vn2vn&quot;. Since 1.34, NULL is the default and means &quot;fabric&quot;. Before 1.34, NULL was rejected as invalid and the default was &quot;fabric&quot;." /><property name="app-fcoe-priority" name_upper="APP_FCOE_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the &quot;app-fcoe-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="app-fip-flags" name_upper="APP_FIP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-fip-priority" name_upper="APP_FIP_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the &quot;app-fip-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="app-iscsi-flags" name_upper="APP_ISCSI_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="app-iscsi-priority" name_upper="APP_ISCSI_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the &quot;app-iscsi-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." /><property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." /><property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." /><property name="priority-flow-control-flags" name_upper="PRIORITY_FLOW_CONTROL_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." /><property name="priority-group-flags" name_upper="PRIORITY_GROUP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." /><property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." /><property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." /><property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." /></setting><setting name="dummy" description="Dummy Link Settings" name_upper="DUMMY" /><setting name="ethtool" description="Ethtool Ethernet Settings" name_upper="ETHTOOL" /><setting name="generic" description="Generic Link Settings" name_upper="GENERIC" /><setting name="gsm" description="GSM-based Mobile Broadband Settings" name_upper="GSM"><property name="apn" name_upper="APN" type="string" description="The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9." /><property name="auto-config" name_upper="AUTO_CONFIG" type="boolean" default="FALSE" description="When TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database." /><property name="device-id" name_upper="DEVICE_ID" type="string" description="The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device." /><property name="home-only" name_upper="HOME_ONLY" type="boolean" default="FALSE" description="When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="network-id" name_upper="NETWORK_ID" type="string" description="The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible." /><property name="number" name_upper="NUMBER" type="string" description="Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1" /><property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="pin" name_upper="PIN" type="string" description="If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device." /><property name="pin-flags" name_upper="PIN_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;pin&quot; property." /><property name="sim-id" name_upper="SIM_ID" type="string" description="The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by &quot;device-id&quot; which contains a SIM card matching the given identifier." /><property name="sim-operator-id" name_upper="SIM_OPERATOR_ID" type="string" description="A MCC/MNC string like &quot;310260&quot; or &quot;21601&quot; identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by &quot;device-id&quot; and &quot;sim-id&quot; which contains a SIM card provisioned by the given operator." /><property name="username" name_upper="USERNAME" type="string" description="The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here." /></setting><setting name="infiniband" description="Infiniband Settings" name_upper="INFINIBAND"><property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." /><property name="p-key" name_upper="P_KEY" type="int32" default="-1" description="The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka &quot;the P_Key at index 0&quot;). Otherwise, it is a 16-bit unsigned integer, whose high bit is set if it is a &quot;full membership&quot; P_Key." /><property name="parent" name_upper="PARENT" type="string" description="The interface name of the parent device of this device. Normally NULL, but if the &quot;p_key&quot; property is set, then you must specify the base device by setting either this property or &quot;mac-address&quot;." /><property name="transport-mode" name_upper="TRANSPORT_MODE" type="string" description="The IP-over-InfiniBand transport mode. Either &quot;datagram&quot; or &quot;connected&quot;." /></setting><setting name="ipv4" description="IPv4 Settings" name_upper="IP4_CONFIG"><property name="addresses" name_upper="ADDRESSES" type="a comma separated list of addresses" description="A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by comma. For example &quot;192.168.1.5/24, 10.1.0.5/24&quot;. The addresses are listed in decreasing priority, meaning the first address will be the primary address." /><property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." /><property name="dhcp-client-id" name_upper="DHCP_CLIENT_ID" type="string" description="A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values &quot;mac&quot; and &quot;perm-mac&quot; are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value &quot;ipv6-duid&quot; uses the DUID from &quot;ipv6.dhcp-duid&quot; property as an RFC4361-compliant client identifier. As IAID it uses &quot;ipv4.dhcp-iaid&quot; and falls back to &quot;ipv6.dhcp-iaid&quot; if unset. The special value &quot;duid&quot; generates a RFC4361-compliant client identifier based on &quot;ipv4.dhcp-iaid&quot; and uses a DUID generated by hashing /etc/machine-id. The special value &quot;stable&quot; is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin." /><property name="dhcp-fqdn" name_upper="DHCP_FQDN" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-hostname&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname-flags" name_upper="DHCP_HOSTNAME_FLAGS" type="uint32" default="0" description="Flags for the DHCP hostname and FQDN. Currently, this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests." /><property name="dhcp-iaid" name_upper="DHCP_IAID" type="string" description="A string containing the &quot;Identity Association Identifier&quot; (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among &quot;mac&quot;, &quot;perm-mac&quot;, &quot;ifname&quot; and &quot;stable&quot;. When set to &quot;mac&quot; (or &quot;perm-mac&quot;), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to &quot;ifname&quot;, the IAID is computed by hashing the interface name. The special value &quot;stable&quot; can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be &quot;ifname&quot;. Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address." /><property name="dhcp-reject-servers" name_upper="DHCP_REJECT_SERVERS" type="array of string" description="Array of servers from which DHCP offers must be rejected. This property is useful to avoid getting a lease from misconfigured or rogue servers. For DHCPv4, each element must be an IPv4 address, optionally followed by a slash and a prefix length (e.g. &quot;192.168.122.0/24&quot;). This property is currently not implemented for DHCPv6." /><property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." /><property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity." /><property name="dhcp-vendor-class-identifier" name_upper="DHCP_VENDOR_CLASS_IDENTIFIER" type="string" description="The Vendor Class Identifier DHCP option (60). Special characters in the data string may be escaped using C-style escapes, nevertheless this property cannot contain nul bytes. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the DHCP option is not sent to the server. Since 1.28" /><property name="dns" name_upper="DNS" type="array of uint32" description="Array of IP addresses of DNS servers." /><property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are &quot;attempts&quot;, &quot;debug&quot;, &quot;edns0&quot;, &quot;inet6&quot;, &quot;ip6-bytestring&quot;, &quot;ip6-dotint&quot;, &quot;ndots&quot;, &quot;no-check-names&quot;, &quot;no-ip6-dotint&quot;, &quot;no-reload&quot;, &quot;no-tld-query&quot;, &quot;rotate&quot;, &quot;single-request&quot;, &quot;single-request-reopen&quot;, &quot;timeout&quot;, &quot;trust-ad&quot;, &quot;use-vc&quot;. The &quot;trust-ad&quot; setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have &quot;trust-ad&quot; enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then &quot;edns0&quot; and &quot;trust-ad&quot; are automatically added." /><property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the &quot;rotate&quot; option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured." /><property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting." /><property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with &quot;never-default&quot; and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length." /><property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured name servers and search domains are ignored and only name servers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." /><property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." /><property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." /><property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." /><property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." /><property name="required-timeout" name_upper="REQUIRED_TIMEOUT" type="int32" default="-1" description="The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e.g. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active. Note that if &quot;may-fail&quot; is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout. A zero value means that no required timeout is present, -1 means the default value (either configuration ipvx.required-timeout override or zero)." /><property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." /><property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." /><property name="routes" name_upper="ROUTES" type="a comma separated list of routes" description="A list of IPv4 destination addresses, prefix length, optional IPv4 next hop addresses, optional route metric, optional attribute. The valid syntax is: &quot;ip[/prefix] [next-hop] [metric] [attribute=val]...[,ip[/prefix]...]&quot;. For example &quot;192.0.2.0/24 10.1.1.1 77, 198.51.100.0/24&quot;." /></setting><setting name="ipv6" description="IPv6 Settings" name_upper="IP6_CONFIG"><property name="addr-gen-mode" name_upper="ADDR_GEN_MODE" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." /><property name="addresses" name_upper="ADDRESSES" type="a comma separated list of addresses" description="A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by comma. For example &quot;2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64&quot;. The addresses are listed in increasing priority, meaning the last address will be the primary address." /><property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." /><property name="dhcp-duid" name_upper="DHCP_DUID" type="string" description="A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value &quot;lease&quot; will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and &quot;dhclient&quot; is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values &quot;llt&quot; and &quot;ll&quot; will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values &quot;stable-llt&quot;, &quot;stable-ll&quot; and &quot;stable-uuid&quot; will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of &quot;stable-ll&quot; and &quot;stable-llt&quot; will be a generated address derived from the stable id. The DUID-LLT time value in the &quot;stable-llt&quot; option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in &quot;llt&quot;). When the property is unset, the global value provided for &quot;ipv6.dhcp-duid&quot; is used. If no global value is provided, the default &quot;lease&quot; value is assumed." /><property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." /><property name="dhcp-hostname-flags" name_upper="DHCP_HOSTNAME_FLAGS" type="uint32" default="0" description="Flags for the DHCP hostname and FQDN. Currently, this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests." /><property name="dhcp-iaid" name_upper="DHCP_IAID" type="string" description="A string containing the &quot;Identity Association Identifier&quot; (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among &quot;mac&quot;, &quot;perm-mac&quot;, &quot;ifname&quot; and &quot;stable&quot;. When set to &quot;mac&quot; (or &quot;perm-mac&quot;), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to &quot;ifname&quot;, the IAID is computed by hashing the interface name. The special value &quot;stable&quot; can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be &quot;ifname&quot;. Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address." /><property name="dhcp-reject-servers" name_upper="DHCP_REJECT_SERVERS" type="array of string" description="Array of servers from which DHCP offers must be rejected. This property is useful to avoid getting a lease from misconfigured or rogue servers. For DHCPv4, each element must be an IPv4 address, optionally followed by a slash and a prefix length (e.g. &quot;192.168.122.0/24&quot;). This property is currently not implemented for DHCPv6." /><property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." /><property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity." /><property name="dns" name_upper="DNS" type="array of byte array" description="Array of IP addresses of DNS servers." /><property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are &quot;attempts&quot;, &quot;debug&quot;, &quot;edns0&quot;, &quot;inet6&quot;, &quot;ip6-bytestring&quot;, &quot;ip6-dotint&quot;, &quot;ndots&quot;, &quot;no-check-names&quot;, &quot;no-ip6-dotint&quot;, &quot;no-reload&quot;, &quot;no-tld-query&quot;, &quot;rotate&quot;, &quot;single-request&quot;, &quot;single-request-reopen&quot;, &quot;timeout&quot;, &quot;trust-ad&quot;, &quot;use-vc&quot;. The &quot;trust-ad&quot; setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have &quot;trust-ad&quot; enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then &quot;edns0&quot; and &quot;trust-ad&quot; are automatically added." /><property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the &quot;rotate&quot; option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins.  If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured." /><property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting." /><property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with &quot;never-default&quot; and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length." /><property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured name servers and search domains are ignored and only name servers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." /><property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." /><property name="ip6-privacy" name_upper="IP6_PRIVACY" type="NMSettingIP6ConfigPrivacy (int32)" description="Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to &quot;-1&quot; (unknown) means fallback to global configuration &quot;ipv6.ip6-privacy&quot;. If also global configuration is unspecified or set to &quot;-1&quot;, fallback to read &quot;/proc/sys/net/ipv6/conf/default/use_tempaddr&quot;. Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the &quot;addr-gen-mode&quot; property's &quot;stable-privacy&quot; setting as another way of avoiding host tracking with IPv6 addresses." /><property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." /><property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." /><property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." /><property name="ra-timeout" name_upper="RA_TIMEOUT" type="int32" default="0" description="A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity." /><property name="required-timeout" name_upper="REQUIRED_TIMEOUT" type="int32" default="-1" description="The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e.g. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active. Note that if &quot;may-fail&quot; is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout. A zero value means that no required timeout is present, -1 means the default value (either configuration ipvx.required-timeout override or zero)." /><property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." /><property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." /><property name="routes" name_upper="ROUTES" type="array of legacy IPv6 route struct" description="Array of IP routes." /><property name="token" name_upper="TOKEN" type="string" description="Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode." /></setting><setting name="ip-tunnel" description="IP Tunneling Settings" name_upper="IP_TUNNEL"><property name="encapsulation-limit" name_upper="ENCAPSULATION_LIMIT" type="uint32" default="0" description="How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels." /><property name="flags" name_upper="FLAGS" type="uint32" default="0" description="Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels." /><property name="flow-label" name_upper="FLOW_LABEL" type="uint32" default="0" description="The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels." /><property name="input-key" name_upper="INPUT_KEY" type="string" description="The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." /><property name="local" name_upper="LOCAL" type="string" description="The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address." /><property name="mode" name_upper="MODE" type="uint32" default="0" description="The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2)." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments." /><property name="output-key" name_upper="OUTPUT_KEY" type="string" description="The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface." /><property name="path-mtu-discovery" name_upper="PATH_MTU_DISCOVERY" type="boolean" default="TRUE" description="Whether to enable Path MTU Discovery on this tunnel." /><property name="remote" name_upper="REMOTE" type="string" description="The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address." /><property name="tos" name_upper="TOS" type="uint32" default="0" description="The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets." /><property name="ttl" name_upper="TTL" type="uint32" default="0" description="The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value." /></setting><setting name="macsec" description="MACSec Settings" name_upper="MACSEC"><property name="encrypt" name_upper="ENCRYPT" type="boolean" default="TRUE" description="Whether the transmitted traffic must be encrypted." /><property name="mka-cak" name_upper="MKA_CAK" type="string" description="The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement." /><property name="mka-cak-flags" name_upper="MKA_CAK_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;mka-cak&quot; property." /><property name="mka-ckn" name_upper="MKA_CKN" type="string" description="The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement." /><property name="mode" name_upper="MODE" type="int32" default="0" description="Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." /><property name="port" name_upper="PORT" type="int32" default="1" description="The port component of the SCI (Secure Channel Identifier), between 1 and 65534." /><property name="send-sci" name_upper="SEND_SCI" type="boolean" default="TRUE" description="Specifies whether the SCI (Secure Channel Identifier) is included in every packet." /><property name="validation" name_upper="VALIDATION" type="int32" default="2" description="Specifies the validation mode for incoming frames." /></setting><setting name="macvlan" description="MAC VLAN Settings" name_upper="MACVLAN"><property name="mode" name_upper="MODE" type="uint32" default="0" description="The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device." /><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." /><property name="promiscuous" name_upper="PROMISCUOUS" type="boolean" default="TRUE" description="Whether the interface should be put in promiscuous mode." /><property name="tap" name_upper="TAP" type="boolean" default="FALSE" description="Whether the interface should be a MACVTAP." /></setting><setting name="match" description="Match settings" name_upper="MATCH"><property name="driver" name_upper="DRIVER" type="array of string" description="A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the pattern." /><property name="interface-name" name_upper="INTERFACE_NAME" type="array of string" description="A list of interface names to match. Each element is a shell wildcard pattern. An element can be prefixed with a pipe symbol (|) or an ampersand (&amp;). The former means that the element is optional and the latter means that it is mandatory. If there are any optional elements, than the match evaluates to true if at least one of the optional element matches (logical OR). If there are any mandatory elements, then they all must match (logical AND). By default, an element is optional. This means that an element &quot;foo&quot; behaves the same as &quot;|foo&quot;. An element can also be inverted with exclamation mark (!) between the pipe symbol (or the ampersand) and before the pattern. Note that &quot;!foo&quot; is a shortcut for the mandatory match &quot;&amp;!foo&quot;. Finally, a backslash can be used at the beginning of the element (after the optional special characters) to escape the start of the pattern. For example, &quot;&amp;\\!a&quot; is an mandatory match for literally &quot;!a&quot;." /><property name="kernel-command-line" name_upper="KERNEL_COMMAND_LINE" type="array of string" description="A list of kernel command line arguments to match. This may be used to check whether a specific kernel command line option is set (or unset, if prefixed with the exclamation mark). The argument must either be a single word, or an assignment (i.e. two words, joined by &quot;=&quot;). In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is looked for with right and left hand side matching. Wildcard patterns are not supported. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the match." /><property name="path" name_upper="PATH" type="array of string" description="A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form &quot;pci-$domain:$bus:$device.$function&quot;, where each variable is an hexadecimal value; for example &quot;pci-0000:0a:00.0&quot;. The path of a device can be obtained with &quot;udevadm info /sys/class/net/$dev | grep ID_PATH=&quot; or by looking at the &quot;path&quot; property exported by NetworkManager (&quot;nmcli -f general.path device show $dev&quot;). Each element of the list is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&amp;', '!' and '\\' are used for optional and mandatory matches and inverting the pattern." /></setting><setting name="802-11-olpc-mesh" description="OLPC Wireless Mesh Settings" name_upper="OLPC_MESH"><property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Channel on which the mesh network to join is located." /><property name="dhcp-anycast-address" name_upper="DHCP_ANYCAST_ADDRESS" type="byte array" description="Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request. This is currently only implemented by dhclient DHCP plugin." /><property name="ssid" name_upper="SSID" type="byte array" description="SSID of the mesh network to join." /></setting><setting name="ovs-bridge" description="OvsBridge Link Settings" name_upper="OVS_BRIDGE"><property name="datapath-type" name_upper="DATAPATH_TYPE" type="string" description="The data path type. One of &quot;system&quot;, &quot;netdev&quot; or empty." /><property name="fail-mode" name_upper="FAIL_MODE" type="string" description="The bridge failure mode. One of &quot;secure&quot;, &quot;standalone&quot; or empty." /><property name="mcast-snooping-enable" name_upper="MCAST_SNOOPING_ENABLE" type="boolean" default="FALSE" description="Enable or disable multicast snooping." /><property name="rstp-enable" name_upper="RSTP_ENABLE" type="boolean" default="FALSE" description="Enable or disable RSTP." /><property name="stp-enable" name_upper="STP_ENABLE" type="boolean" default="FALSE" description="Enable or disable STP." /></setting><setting name="ovs-dpdk" description="OvsDpdk Link Settings" name_upper="OVS_DPDK"><property name="devargs" name_upper="DEVARGS" type="string" description="Open vSwitch DPDK device arguments." /><property name="n-rxq" name_upper="N_RXQ" type="uint32" default="0" description="Open vSwitch DPDK number of rx queues. Defaults to zero which means to leave the parameter in OVS unspecified and effectively configures one queue." /></setting><setting name="ovs-interface" description="Open vSwitch Interface Settings" name_upper="OVS_INTERFACE"><property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, &quot;system&quot;, &quot;patch&quot;, &quot;dpdk&quot;, or empty." /></setting><setting name="ovs-patch" description="OvsPatch Link Settings" name_upper="OVS_PATCH"><property name="peer" name_upper="PEER" type="string" description="Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer." /></setting><setting name="ovs-port" description="OvsPort Link Settings" name_upper="OVS_PORT"><property name="bond-downdelay" name_upper="BOND_DOWNDELAY" type="uint32" default="0" description="The time port must be inactive in order to be considered down." /><property name="bond-mode" name_upper="BOND_MODE" type="string" description="Bonding mode. One of &quot;active-backup&quot;, &quot;balance-slb&quot;, or &quot;balance-tcp&quot;." /><property name="bond-updelay" name_upper="BOND_UPDELAY" type="uint32" default="0" description="The time port must be active before it starts forwarding traffic." /><property name="lacp" name_upper="LACP" type="string" description="LACP mode. One of &quot;active&quot;, &quot;off&quot;, or &quot;passive&quot;." /><property name="tag" name_upper="TAG" type="uint32" default="0" description="The VLAN tag in the range 0-4095." /><property name="vlan-mode" name_upper="VLAN_MODE" type="string" description="The VLAN mode. One of &quot;access&quot;, &quot;native-tagged&quot;, &quot;native-untagged&quot;, &quot;trunk&quot; or unset." /></setting><setting name="ppp" description="Point-to-Point Protocol Settings" name_upper="PPP"><property name="baud" name_upper="BAUD" type="uint32" default="0" description="If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed." /><property name="crtscts" name_upper="CRTSCTS" type="boolean" default="FALSE" description="If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals.  This value should normally be set to FALSE." /><property name="lcp-echo-failure" name_upper="LCP_ECHO_FAILURE" type="uint32" default="0" description="If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer.  The &quot;lcp-echo-interval&quot; property must also be set to a non-zero value if this property is used." /><property name="lcp-echo-interval" name_upper="LCP_ECHO_INTERVAL" type="uint32" default="0" description="If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value).  Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this." /><property name="mppe-stateful" name_upper="MPPE_STATEFUL" type="boolean" default="FALSE" description="If TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE." /><property name="mru" name_upper="MRU" type="uint32" default="0" description="If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384." /><property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, instruct pppd to send packets no larger than the specified size." /><property name="no-vj-comp" name_upper="NO_VJ_COMP" type="boolean" default="FALSE" description="If TRUE, Van Jacobsen TCP header compression will not be requested." /><property name="noauth" name_upper="NOAUTH" type="boolean" default="TRUE" description="If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE." /><property name="nobsdcomp" name_upper="NOBSDCOMP" type="boolean" default="FALSE" description="If TRUE, BSD compression will not be requested." /><property name="nodeflate" name_upper="NODEFLATE" type="boolean" default="FALSE" description="If TRUE, &quot;deflate&quot; compression will not be requested." /><property name="refuse-chap" name_upper="REFUSE_CHAP" type="boolean" default="FALSE" description="If TRUE, the CHAP authentication method will not be used." /><property name="refuse-eap" name_upper="REFUSE_EAP" type="boolean" default="FALSE" description="If TRUE, the EAP authentication method will not be used." /><property name="refuse-mschap" name_upper="REFUSE_MSCHAP" type="boolean" default="FALSE" description="If TRUE, the MSCHAP authentication method will not be used." /><property name="refuse-mschapv2" name_upper="REFUSE_MSCHAPV2" type="boolean" default="FALSE" description="If TRUE, the MSCHAPv2 authentication method will not be used." /><property name="refuse-pap" name_upper="REFUSE_PAP" type="boolean" default="FALSE" description="If TRUE, the PAP authentication method will not be used." /><property name="require-mppe" name_upper="REQUIRE_MPPE" type="boolean" default="FALSE" description="If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections." /><property name="require-mppe-128" name_upper="REQUIRE_MPPE_128" type="boolean" default="FALSE" description="If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the &quot;require-mppe&quot; property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail." /></setting><setting name="pppoe" description="PPP-over-Ethernet Settings" name_upper="PPPOE"><property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in &quot;interface-name&quot; of NMSettingConnection." /><property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the PPPoE service." /><property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." /><property name="service" name_upper="SERVICE" type="string" description="If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required." /><property name="username" name_upper="USERNAME" type="string" description="Username used to authenticate with the PPPoE service." /></setting><setting name="proxy" description="WWW Proxy Settings" name_upper="PROXY"><property name="browser-only" name_upper="BROWSER_ONLY" type="boolean" default="FALSE" description="Whether the proxy configuration is for browser only." /><property name="method" name_upper="METHOD" type="int32" default="0" description="Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)" /><property name="pac-script" name_upper="PAC_SCRIPT" type="string" description="PAC script for the connection." /><property name="pac-url" name_upper="PAC_URL" type="string" description="PAC URL for obtaining PAC file." /></setting><setting name="serial" description="Serial Link Settings" name_upper="SERIAL"><property name="baud" name_upper="BAUD" type="uint32" default="57600" description="Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed." /><property name="bits" name_upper="BITS" type="uint32" default="8" description="Byte-width of the serial communication. The 8 in &quot;8n1&quot; for example." /><property name="parity" name_upper="PARITY" type="NMSettingSerialParity (byte)" description="Parity setting of the serial port." /><property name="send-delay" name_upper="SEND_DELAY" type="uint64" default="0" description="Time to delay between each byte sent to the modem, in microseconds." /><property name="stopbits" name_upper="STOPBITS" type="uint32" default="1" description="Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in &quot;8n1&quot; for example." /></setting><setting name="sriov" description="SR-IOV settings" name_upper="SRIOV"><property name="autoprobe-drivers" name_upper="AUTOPROBE_DRIVERS" type="NMTernary (int32)" description="Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1)." /><property name="total-vfs" name_upper="TOTAL_VFS" type="uint32" default="0" description="The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection." /><property name="vfs" name_upper="VFS" type="array of vardict" description="Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: &quot;INDEX [ATTR=VALUE[ ATTR=VALUE]...]&quot;. for example: &quot;2 mac=00:11:22:33:44:55 spoof-check=true&quot;. Multiple VFs can be specified using a comma as separator. Currently, the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The &quot;vlans&quot; attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form &quot;ID[.PRIORITY[.PROTO]]&quot;. PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad." /></setting><setting name="tc" description="Linux Traffic Control Settings" name_upper="TC_CONFIG"><property name="qdiscs" name_upper="QDISCS" type="GPtrArray(NMTCQdisc)" description="Array of TC queueing disciplines. When the &quot;tc&quot; setting is present, qdiscs from this property are applied upon activation. If the property is empty, all qdiscs are removed and the device will only have the default qdisc assigned by kernel according to the &quot;net.core.default_qdisc&quot; sysctl. If the &quot;tc&quot; setting is not present, NetworkManager doesn't touch the qdiscs present on the interface."><description-docbook>
 <para>
 Array of TC queueing disciplines. qdisc is a basic block in the
 Linux traffic control subsystem
-- 
cgit 1.3.0-6-gf8a5