From 2965dc70bb3cbfa8de2f279761812b84b87600cb Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Sun, 18 Dec 2022 21:31:39 +0100 Subject: New upstream version 1.40.8 --- src/libnmc-setting/settings-docs-input.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/libnmc-setting/settings-docs-input.xml') diff --git a/src/libnmc-setting/settings-docs-input.xml b/src/libnmc-setting/settings-docs-input.xml index 77643955..39bfb540 100644 --- a/src/libnmc-setting/settings-docs-input.xml +++ b/src/libnmc-setting/settings-docs-input.xml @@ -440,7 +440,7 @@ fixed priority. Example: priority 5 from 1:2:3::5/128 table 45 -A comma separated list of routing rules for policy routing. Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels. Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels. The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. Whether to enable Path MTU Discovery on this tunnel. Whether to enable Path MTU Discovery on this tunnel. The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. Whether the transmitted traffic must be encrypted. Whether the transmitted traffic must be encrypted. The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement. The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement. Flags indicating how to handle the "mka-cak" property. Flags indicating how to handle the "mka-cak" property. The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement. The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement. Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained. Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained. If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. The port component of the SCI (Secure Channel Identifier), between 1 and 65534. The port component of the SCI (Secure Channel Identifier), between 1 and 65534. Specifies whether the SCI (Secure Channel Identifier) is included in every packet. Specifies whether the SCI (Secure Channel Identifier) is included in every packet. Specifies the validation mode for incoming frames. Specifies the validation mode for incoming frames. The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device. The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device. If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. Whether the interface should be put in promiscuous mode. Whether the interface should be put in promiscuous mode. Whether the interface should be a MACVTAP. Whether the interface should be a MACVTAP. A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&', '!' and '\\' are used for optional and mandatory matches and inverting the pattern. A list of driver names to match. Each element is a shell wildcard pattern. +A comma separated list of routing rules for policy routing. Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels. Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels. The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. Whether to enable Path MTU Discovery on this tunnel. Whether to enable Path MTU Discovery on this tunnel. The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. Whether the transmitted traffic must be encrypted. Whether the transmitted traffic must be encrypted. The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement. Must be a string of 32 hexadecimal characters. The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement. Must be a string of 32 hexadecimal characters. Flags indicating how to handle the "mka-cak" property. Flags indicating how to handle the "mka-cak" property. The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement. Must be a string of hexadecimal characters with a even length between 2 and 64. The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement. Must be a string of hexadecimal characters with a even length between 2 and 64. Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained. Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained. If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. The port component of the SCI (Secure Channel Identifier), between 1 and 65534. The port component of the SCI (Secure Channel Identifier), between 1 and 65534. Specifies whether the SCI (Secure Channel Identifier) is included in every packet. Specifies whether the SCI (Secure Channel Identifier) is included in every packet. Specifies the validation mode for incoming frames. Specifies the validation mode for incoming frames. The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device. The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device. If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. Whether the interface should be put in promiscuous mode. Whether the interface should be put in promiscuous mode. Whether the interface should be a MACVTAP. Whether the interface should be a MACVTAP. A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&', '!' and '\\' are used for optional and mandatory matches and inverting the pattern. A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&', '!' and '\\' are used for optional and mandatory matches and inverting the pattern. A list of interface names to match. Each element is a shell wildcard pattern. An element can be prefixed with a pipe symbol (|) or an ampersand (&). The former means that the element is optional and the latter means that it is mandatory. If there are any optional elements, than the match evaluates to true if at least one of the optional element matches (logical OR). If there are any mandatory elements, then they all must match (logical AND). By default, an element is optional. This means that an element "foo" behaves the same as "|foo". An element can also be inverted with exclamation mark (!) between the pipe symbol (or the ampersand) and before the pattern. Note that "!foo" is a shortcut for the mandatory match "&!foo". Finally, a backslash can be used at the beginning of the element (after the optional special characters) to escape the start of the pattern. For example, "&\\!a" is an mandatory match for literally "!a". A list of interface names to match. Each element is a shell wildcard pattern. -- cgit 1.3.0-6-gf8a5