From 88c227d90a6b7b388c5c85d72802a0ca8f05ed5c Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Thu, 13 Jan 2022 22:30:39 +0100
Subject: New upstream version 1.34.0

---
 src/libnm-client-impl/nm-settings-docs-gir.xml | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'src/libnm-client-impl/nm-settings-docs-gir.xml')

diff --git a/src/libnm-client-impl/nm-settings-docs-gir.xml b/src/libnm-client-impl/nm-settings-docs-gir.xml
index cbbae7b6..b916ee04 100644
--- a/src/libnm-client-impl/nm-settings-docs-gir.xml
+++ b/src/libnm-client-impl/nm-settings-docs-gir.xml
@@ -5,10 +5,11 @@
 <nm-setting-docs>
   <setting name="connection" description="General Connection Profile Settings" name_upper="CONNECTION" >
     <property name="auth-retries" name_upper="AUTH_RETRIES" type="int32" default="-1" description="The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently, this only applies to 802-1x authentication." />
-    <property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description='Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.' />
-    <property name="autoconnect-priority" name_upper="AUTOCONNECT_PRIORITY" type="int32" default="0" description="The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority." />
+    <property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description='Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.' />
+    <property name="autoconnect-priority" name_upper="AUTOCONNECT_PRIORITY" type="int32" default="0" description="The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen." />
     <property name="autoconnect-retries" name_upper="AUTOCONNECT_RETRIES" type="int32" default="-1" description="The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again." />
     <property name="autoconnect-slaves" name_upper="AUTOCONNECT_SLAVES" type="NMSettingConnectionAutoconnectSlaves (int32)" description='Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.' />
+    <property name="dns-over-tls" name_upper="DNS_OVER_TLS" type="int32" default="-1" description="Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: &quot;yes&quot; (2) use DNSOverTls and disabled fallback, &quot;opportunistic&quot; (1) use DNSOverTls but allow fallback to unencrypted resolution, &quot;no&quot; (0) don't ever use DNSOverTls. If unspecified &quot;default&quot; depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved." />
     <property name="gateway-ping-timeout" name_upper="GATEWAY_PING_TIMEOUT" type="uint32" default="0" description="If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping." />
     <property name="id" name_upper="ID" type="string" description='A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G".' />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface." />
@@ -98,6 +99,9 @@
   <setting name="bond" description="Bonding Settings" name_upper="BOND" >
     <property name="options" name_upper="OPTIONS" type="dict of string to string" default="{'mode': 'balance-rr'}" description="Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
   </setting>
+  <setting name="bond-port" description="Bond Port Settings" name_upper="BOND_PORT" >
+    <property name="queue-id" name_upper="QUEUE_ID" type="uint32" default="0" description="The queue ID of this bond port. The maximum value of queue ID is the number of TX queues currently active in device." />
+  </setting>
   <setting name="bridge" description="Bridging Settings" name_upper="BRIDGE" >
     <property name="ageing-time" name_upper="AGEING_TIME" type="uint32" default="300" description="The Ethernet MAC address aging time, in seconds." />
     <property name="forward-delay" name_upper="FORWARD_DELAY" type="uint32" default="15" description="The Spanning Tree Protocol (STP) forwarding delay, in seconds." />
@@ -142,7 +146,7 @@
   </setting>
   <setting name="dcb" description="Data Center Bridging Settings" name_upper="DCB" >
     <property name="app-fcoe-flags" name_upper="APP_FCOE_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="app-fcoe-mode" name_upper="APP_FCOE_MODE" type="string" default='"fabric"' description='The FCoE controller mode; either "fabric" (default) or "vn2vn".' />
+    <property name="app-fcoe-mode" name_upper="APP_FCOE_MODE" type="string" description='The FCoE controller mode; either "fabric" or "vn2vn". Since 1.34, NULL is the default and means "fabric". Before 1.34, NULL was rejected as invalid and the default was "fabric".' />
     <property name="app-fcoe-priority" name_upper="APP_FCOE_PRIORITY" type="int32" default="-1" description='The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the "app-fcoe-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.' />
     <property name="app-fip-flags" name_upper="APP_FIP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
     <property name="app-fip-priority" name_upper="APP_FIP_PRIORITY" type="int32" default="-1" description='The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the "app-fip-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.' />
@@ -464,7 +468,7 @@
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
     <property name="port" name_upper="PORT" type="string" description='Specific port type to use if the device supports multiple attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored.' />
     <property name="s390-nettype" name_upper="S390_NETTYPE" type="string" description='s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems.' />
-    <property name="s390-options" name_upper="S390_OPTIONS" type="dict of string to string" default="{}" description='Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include "portno", "layer2", "portname", "protocol", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).' />
+    <property name="s390-options" name_upper="S390_OPTIONS" type="dict of string to string" default="{}" description='Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include "portno", "layer2", "portname", "protocol", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). Currently, NetworkManager itself does nothing with this information. However, s390utils ships a udev rule which parses this information and applies it to the interface.' />
     <property name="s390-subchannels" name_upper="S390_SUBCHANNELS" type="array of string" description='Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.' />
     <property name="speed" name_upper="SPEED" type="uint32" default="0" description='When a value greater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.' />
     <property name="wake-on-lan" name_upper="WAKE_ON_LAN" type="uint32" default="1" description="The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
-- 
cgit 1.3.0-6-gf8a5