From a54ac63bbf9b2c71026ac9028a8ffaf186cf3c82 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Sun, 28 Jun 2020 18:58:14 +0200 Subject: New upstream version 1.25.90 --- man/nmcli.xml | 425 ++-------------------------------------------------------- 1 file changed, 14 insertions(+), 411 deletions(-) (limited to 'man/nmcli.xml') diff --git a/man/nmcli.xml b/man/nmcli.xml index cded9ab6..fdc79ad4 100644 --- a/man/nmcli.xml +++ b/man/nmcli.xml @@ -728,7 +728,7 @@ You can also specify particular fields. For static configuration, use setting and property names as described in - nm-settings5 + nm-settings-nmcli5 manual page. For active data use GENERAL, IP4, DHCP4, IP6, DHCP6, VPN. @@ -882,9 +882,10 @@ value. An empty value ("") resets the property value to the default. - In addition to the properties, you can also use short names for some of - the properties. Consult the - section for details. + See nm-settings-nmcli5 + for complete reference of setting and property names, their descriptions + and default values. The setting and + property can be abbreviated provided they are unique. If you want to append an item or a flag to the existing value, use + prefix for the property name or alias. If you want to @@ -897,11 +898,6 @@ ip4, ipv4.addresses, bond.options, 802-1x.phase1-auth-flags etc. - See nm-settings5 - for complete reference of setting and property names, their descriptions - and default values. The setting and - property can be abbreviated provided they are unique. - The connection is identified by its name, UUID or D-Bus path. If ID is ambiguous, a keyword , or can be used. @@ -942,9 +938,8 @@ Create a new connection using specified properties. You need to describe the newly created connections with the property and value pairs. - See nm-settings5 - for the complete reference. You can also use the aliases described in - section. The syntax is + See nm-settings-nmcli5 + for the complete reference. The syntax is the same as of the nmcli connection modify command. To construct a meaningful connection you at the very least need to set the @@ -1054,7 +1049,7 @@ See also - nm-settings5 + nm-settings-nmcli5 for all NetworkManager settings and property names, and their descriptions; and nmcli-examples7 @@ -1343,13 +1338,9 @@ This command lets you do temporary changes to a configuration active on a particular device. The changes are not preserved in the connection profile. - See nm-settings5 + See nm-settings-nmcli5 for the list of available properties. Please note that some properties can't be changed on an already connected device. - - You can also use the aliases described in - section. The syntax is - the same as of the nmcli connection modify command. @@ -1718,396 +1709,6 @@ - Property Aliases - - Apart from the property-value pairs, connection add, - connection modify and device modify also - accept short forms of some properties. They exist for convenience. Some aliases can - affect multiple connection properties at once. - - The overview of the aliases is below. An actual connection type is used to - disambiguate these options from the options of the same name that are valid for - multiple connection types (such as ). - - Options for all connections - - AliasPropertyNote - - - - type - connection.type - This alias also accepts values of , - and . They create - connection profiles. Their use is discouraged in -favor of using a specific type with option. - - - con-name - connection.id - When not provided a default name is generated: <type>[-<ifname>][-<num>]). - - autoconnectconnection.autoconnect - - ifname - connection.interface-name - A value of * will be interpreted as -no value, making the connection profile interface-independent. -Note: use quotes around * to suppress shell expansion. -For bond, team and bridge connections a default name will be generated if not set. - - - master - connection.master - Value specified here will be canonicalized. -It can be prefixed with ifname/, uuid/ -or id/ to disambiguate it. -If the master connection can be found this will set connection.slave-type -property as well. - - slave-typeconnection.slave-type - -
- - PPPoE options - - AliasProperty - - - usernamepppoe.username - passwordpppoe.password - servicepppoe.service - parentpppoe.parent - -
- - Wired Ethernet options - - AliasProperty - - - mtuwired.mtu - macwired.mac-address - cloned-macwired.cloned-mac-address - -
- - Infiniband options - - AliasProperty - - - mtuinfiniband.mtu - macinfiniband.mac-address - transport-modeinfiniband.transport-mode - parentinfiniband.parent - p-keyinfiniband.p-key - -
- - Wi-Fi options - - AliasProperty - - - ssidwireless.ssid - modewireless.mode - mtuwireless.mtu - macwireless.mac-address - cloned-macwireless.cloned-mac-address - -
- - WiMax options - - AliasProperty - - - nspwimax.network-name - macwimax.mac-address - -
- - GSM options - - AliasProperty - - - apngsm.apn - usergsm.username - passwordgsm.password - -
- - CDMA options - - AliasProperty - - - usercdma.username - passwordcdma.password - -
- - Bluetooth options - - AliasPropertyNote - - - addrbluetooth.bdaddr - - bt-type - bluetooth.type - Apart from the usual panu, -nap and dun options, the values of -dun-gsm and dun-cdma can be used for compatibility -with older versions. They are equivalent to using dun and setting -appropriate gsm.* or cdma.* properties. - - -
- - VLAN options - - AliasProperty - - - devvlan.parent - idvlan.id - flagsvlan.flags - ingressvlan.ingress-priority-map - egressvlan.egress-priority-map - -
- - Bonding options - - AliasPropertyNote - - - - mode - bond.options - Setting each of these adds the option to bond.options property. -It's equivalent to the +bond.options 'option=value' syntax. - - primary - miimon - downdelay - updelay - arp-interval - arp-ip-target - lacp-rate - -
- - Team options - - AliasPropertyNote - - - configteam.config - Either a filename or a team configuration in JSON format. To enforce one or the other, the value can be prefixed with "file://" or "json://". - - -
- - Team port options - - AliasPropertyNote - - - configteam-port.config - Either a filename or a team configuration in JSON format. To enforce one or the other, the value can be prefixed with "file://" or "json://". - - -
- - Bridge options - - AliasProperty - - - stpbridge.stp - prioritybridge.priority - forward-delaybridge.forward-delay - hello-timebridge.hello-time - max-agebridge.max-age - ageing-timebridge.ageing-time - group-forward-maskbridge.group-forward-mask - multicast-snoopingbridge.multicast-snooping - macbridge.mac-address - prioritybridge-port.priority - path-costbridge-port.path-cost - hairpinbridge-port.hairpin-mode - -
- - VPN options - - AliasProperty - - - vpn-typevpn.service-type - uservpn.user-name - -
- - OLPC Mesh options - - AliasProperty - - - ssidolpc-mesh.ssid - channelolpc-mesh.channel - dhcp-anycastolpc-mesh.dhcp-anycast-address - -
- - ADSL options - - AliasProperty - - - usernameadsl.username - protocoladsl.protocol - passwordadsl.password - encapsulationadsl.encapsulation - -
- - MACVLAN options - - AliasProperty - - - devmacvlan.parent - modemacvlan.mode - tapmacvlan.tap - -
- - MACsec options - - AliasProperty - - - devmacsec.parent - modemacsec.mode - encryptmacsec.encrypt - cakmacsec.cak - cknmacsec.ckn - portmacsec.port - -
- - VxLAN options - - AliasProperty - - - idvxlan.id - remotevxlan.remote - devvxlan.parent - localvxlan.local - source-port-minvxlan.source-port-min - source-port-maxvxlan.source-port-max - destination-portvxlan.destination-port - -
- - Tun options - - AliasProperty - - - modetun.mode - ownertun.owner - grouptun.group - pitun.pi - vnet-hdrtun.vnet-hdr - multi-queuetun.multi-queue - -
- - IP tunneling options - - AliasProperty - - - modeip-tunnel.mode - localip-tunnel.local - remoteip-tunnel.remote - devip-tunnel.parent - -
- - WPAN options - - AliasProperty - - - macwpan.mac - short-addrwpan.short-addr - pan-idwpan.pan-id - -
- - 6LoWPAN options - - AliasProperty - - - dev6lowpan.parent - -
- - IPv4 options - - AliasPropertyNote - - - - ip4 - ipv4.addresses ipv4.method - The alias is equivalent to the +ipv4.addresses syntax and also sets ipv4.method to manual. It can be specified multiple times. - - gw4ipv4.gateway - -
- - IPv6 options - - AliasPropertyNote - - - - ip6 - ipv6.addresses ipv6.method - The alias is equivalent to the +ipv6.addresses syntax and also sets ipv6.method to manual. It can be specified multiple times. - - gw6ipv6.gateway - -
- - Proxy options - - AliasPropertyNote - - - methodproxy.method - browser-onlyproxy.browser-only - pac-urlproxy.pac-url - - pac-script - proxy.pac-script - Read the JavaScript PAC (proxy auto-config) script from file or pass it directly on the command line. Prefix the value with "file://" or "js://" to force one or the other. - - -
- - - Colors Implicit coloring can be disabled by an empty file /etc/terminal-colors.d/nmcli.disable. @@ -2802,14 +2403,16 @@ It's equivalent to the +bond.options 'option=value' syntax. See Also - nmcli-examples7, + + nmcli-examples7, + nm-settings-nmcli5, nm-online1, NetworkManager8, NetworkManager.conf5, - nm-settings5, nm-applet1, nm-connection-editor1, - terminal-colors.d5. + terminal-colors.d5. + -- cgit 1.3.0-6-gf8a5