From 04bc9e1cd3544445d883ad29ea108c1645c8e7b7 Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Mon, 4 Jun 2018 00:07:45 +0200
Subject: New upstream version 1.11.4

---
 libnm/nm-settings-docs.xml | 39 +++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 18 deletions(-)

(limited to 'libnm/nm-settings-docs.xml')

diff --git a/libnm/nm-settings-docs.xml b/libnm/nm-settings-docs.xml
index 57553f8b..5334b658 100644
--- a/libnm/nm-settings-docs.xml
+++ b/libnm/nm-settings-docs.xml
@@ -5,22 +5,23 @@
 <nm-setting-docs>
   <setting name="connection" description="General Connection Profile Settings" name_upper="CONNECTION" >
     <property name="auth-retries" name_upper="AUTH_RETRIES" type="int32" default="-1" description="The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently this only applies to 802-1x authentication." />
-    <property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description="Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection." />
+    <property name="autoconnect" name_upper="AUTOCONNECT" type="boolean" default="TRUE" description="Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See &quot;secondaries&quot; as an alternative to automatically connect VPN profiles." />
     <property name="autoconnect-priority" name_upper="AUTOCONNECT_PRIORITY" type="int32" default="0" description="The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority." />
     <property name="autoconnect-retries" name_upper="AUTOCONNECT_RETRIES" type="int32" default="-1" description="The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again." />
-    <property name="autoconnect-slaves" name_upper="AUTOCONNECT_SLAVES" type="NMSettingConnectionAutoconnectSlaves (int32)" description="Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0." />
+    <property name="autoconnect-slaves" name_upper="AUTOCONNECT_SLAVES" type="NMSettingConnectionAutoconnectSlaves (int32)" description="Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties &quot;autoconnect&quot;, &quot;autoconnect-priority&quot; and &quot;autoconnect-retries&quot; are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0." />
     <property name="gateway-ping-timeout" name_upper="GATEWAY_PING_TIMEOUT" type="uint32" default="0" description="If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping." />
     <property name="id" name_upper="ID" type="string" description="A human readable unique identifier for the connection, like &quot;Work Wi-Fi&quot; or &quot;T-Mobile 3G&quot;." />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface." />
     <property name="lldp" name_upper="LLDP" type="int32" default="-1" description="Whether LLDP is enabled for the connection." />
     <property name="master" name_upper="MASTER" type="string" description="Interface name of the master device or UUID of the master connection." />
+    <property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. When updating this property on a currently activated connection, the change takes effect immediately. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved." />
     <property name="metered" name_upper="METERED" type="NMMetered (int32)" description="Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately." />
     <property name="name" name_upper="NAME" type="string" default="connection" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="permissions" name_upper="PERMISSIONS" type="array of string" default="[]" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." />
     <property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." />
     <property name="secondaries" name_upper="SECONDARIES" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
     <property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." />
-    <property name="stable-id" name_upper="STABLE_ID" type="string" description="Token to generate stable IDs for the connection. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. Note that also the interface name of the activating connection and a per-host secret key is included into the address generation so that the same stable-id on different hosts/devices yields different addresses. If the value is unset, an ID unique for the connection is used. Specifying a stable-id allows multiple connections to generate the same addresses. Another use is to generate IDs at runtime via dynamic substitutions. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-boot, or every time. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}/${BOOT}&quot; to create a unique id for this connection that changes with every reboot. Note that two connections only use the same effective id if their stable-id is also identical before performing dynamic substitutions." />
+    <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds the the interface name of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." />
     <property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." />
     <property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." />
     <property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." />
@@ -99,7 +100,7 @@
     <property name="group-forward-mask" name_upper="GROUP_FORWARD_MASK" type="uint32" default="0" description="A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP." />
     <property name="hello-time" name_upper="HELLO_TIME" type="uint32" default="2" description="The Spanning Tree Protocol (STP) hello time, in seconds." />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the bridge's interface name." />
-    <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the &quot;ethernet.cloned-mac-address&quot; is referred instead to generate the initial MAC address. Note that setting &quot;ethernet.cloned-mac-address&quot; anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated." />
+    <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the &quot;ethernet.cloned-mac-address&quot; is referred instead to generate the initial MAC address. Note that setting &quot;ethernet.cloned-mac-address&quot; anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1" />
     <property name="max-age" name_upper="MAX_AGE" type="uint32" default="20" description="The Spanning Tree Protocol (STP) maximum message age, in seconds." />
     <property name="multicast-snooping" name_upper="MULTICAST_SNOOPING" type="boolean" default="TRUE" description="Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved." />
     <property name="name" name_upper="NAME" type="string" default="bridge" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
@@ -129,14 +130,14 @@
     <property name="app-iscsi-flags" name_upper="APP_ISCSI_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
     <property name="app-iscsi-priority" name_upper="APP_ISCSI_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the &quot;app-iscsi-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." />
     <property name="name" name_upper="NAME" type="string" default="dcb" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
-    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
-    <property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." />
+    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
+    <property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." />
     <property name="priority-flow-control-flags" name_upper="PRIORITY_FLOW_CONTROL_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
+    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
     <property name="priority-group-flags" name_upper="PRIORITY_GROUP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
-    <property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." />
-    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
+    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
+    <property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." />
+    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
   </setting>
   <setting name="dummy" description="Dummy Link Settings" name_upper="DUMMY" >
     <property name="name" name_upper="NAME" type="string" default="dummy" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
@@ -171,16 +172,16 @@
   <setting name="ipv4" description="IPv4 Settings" name_upper="IP4_CONFIG" >
     <property name="address-data" name_upper="ADDRESS_DATA" type="array of vardict" description="Array of IPv4 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses." />
     <property name="addresses" name_upper="ADDRESSES" type="array of array of uint32" default="[]" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet." />
-    <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or 3 seconds).  A value greater than zero is a timeout in milliseconds." />
-    <property name="dhcp-client-id" name_upper="DHCP_CLIENT_ID" type="string" description="A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0." />
+    <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." />
+    <property name="dhcp-client-id" name_upper="DHCP_CLIENT_ID" type="string" description="A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values &quot;mac&quot; and &quot;perm-mac&quot; are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet type (01). Currently, these options only work for ethernet type of links. The special value &quot;stable&quot; is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If unset, a globally configured default is used. If still unset, the client-id from the last lease is reused." />
     <property name="dhcp-fqdn" name_upper="DHCP_FQDN" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-hostname&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
     <property name="dns" name_upper="DNS" type="array of uint32" default="[]" description="Array of IP addresses of DNS servers (as network-byte-order integers)" />
     <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="Intra-connection DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. For that, just specify the DNS servers in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used." />
-    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains." />
+    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority).  Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
+    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
     <property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
@@ -197,14 +198,14 @@
     <property name="addr-gen-mode" name_upper="ADDR_GEN_MODE" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." />
     <property name="address-data" name_upper="ADDRESS_DATA" type="array of vardict" description="Array of IPv6 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses." />
     <property name="addresses" name_upper="ADDRESSES" type="array of legacy IPv6 address struct (a(ayuay))" default="[]" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet." />
-    <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or 3 seconds).  A value greater than zero is a timeout in milliseconds." />
+    <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." />
     <property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
     <property name="dns" name_upper="DNS" type="array of byte array" default="[]" description="Array of IP addresses of DNS servers (in network byte order)" />
     <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="Intra-connection DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. For that, just specify the DNS servers in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used." />
-    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains." />
+    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority).  Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
+    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
     <property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
@@ -221,6 +222,7 @@
   </setting>
   <setting name="ip-tunnel" description="IP Tunneling Settings" name_upper="IP_TUNNEL" >
     <property name="encapsulation-limit" name_upper="ENCAPSULATION_LIMIT" type="uint32" default="0" description="How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels." />
+    <property name="flags" name_upper="FLAGS" type="uint32" default="0" description="Tunnel flags. Currently the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels." />
     <property name="flow-label" name_upper="FLOW_LABEL" type="uint32" default="0" description="The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels." />
     <property name="input-key" name_upper="INPUT_KEY" type="string" description="The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." />
     <property name="local" name_upper="LOCAL" type="string" description="The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address." />
@@ -441,7 +443,7 @@
     <property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the &quot;band&quot; property to be set." />
     <property name="cloned-mac-address" name_upper="CLONED_MAC_ADDRESS" type="byte array" description="This D-Bus field is deprecated in favor of &quot;assigned-mac-address&quot; which is more flexible and allows specifying special variants like &quot;random&quot;. For libnm and nmcli, this field is called &quot;cloned-mac-address&quot;." />
     <property name="generate-mac-address-mask" name_upper="GENERATE_MAC_ADDRESS_MASK" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
-    <property name="hidden" name_upper="HIDDEN" type="boolean" default="FALSE" description="If TRUE, indicates this network is a non-broadcasting network that hides its SSID.  In this case various workarounds may take place, such as probe-scanning the SSID for more reliable network discovery.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution." />
+    <property name="hidden" name_upper="HIDDEN" type="boolean" default="FALSE" description="If TRUE, indicates this network is a non-broadcasting network that hides its SSID.  In this case various workarounds may take place, such as probe-scanning the SSID for more reliable network discovery.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. Note that marking the network as hidden may be a privacy issue for you, as the explicit probe-scans may be distinctly recognizable on the air." />
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg &quot;00:11:22:33:44:55&quot;)." />
     <property name="mac-address-randomization" name_upper="MAC_ADDRESS_RANDOMIZATION" type="uint32" default="0" description="One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1" />
@@ -457,6 +459,7 @@
   </setting>
   <setting name="802-11-wireless-security" description="Wi-Fi Security Settings" name_upper="WIRELESS_SECURITY" >
     <property name="auth-alg" name_upper="AUTH_ALG" type="string" description="When WEP is used (ie, key-mgmt = &quot;none&quot; or &quot;ieee8021x&quot;) indicate the 802.11 authentication algorithm required by the AP here.  One of &quot;open&quot; for Open System, &quot;shared&quot; for Shared Key, or &quot;leap&quot; for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;) the &quot;leap-username&quot; and &quot;leap-password&quot; properties must be specified." />
+    <property name="fils" name_upper="FILS" type="int32" default="0" description="Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled." />
     <property name="group" name_upper="GROUP" type="array of string" default="[]" description="A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of &quot;wep40&quot;, &quot;wep104&quot;, &quot;tkip&quot;, or &quot;ccmp&quot;." />
     <property name="key-mgmt" name_upper="KEY_MGMT" type="string" description="Key management used for the connection.  One of &quot;none&quot; (WEP), &quot;ieee8021x&quot; (Dynamic WEP), &quot;wpa-none&quot; (Ad-Hoc WPA-PSK), &quot;wpa-psk&quot; (infrastructure WPA-PSK), or &quot;wpa-eap&quot; (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security." />
     <property name="leap-password" name_upper="LEAP_PASSWORD" type="string" description="The login password for legacy LEAP connections (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;)." />
-- 
cgit 1.3.0-6-gf8a5


From 069cb5c3a525ebcc19cc2927964258acaca87b13 Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Sun, 17 Jun 2018 14:54:10 +0200
Subject: New upstream version 1.11.90

---
 libnm/nm-settings-docs.xml | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'libnm/nm-settings-docs.xml')

diff --git a/libnm/nm-settings-docs.xml b/libnm/nm-settings-docs.xml
index 5334b658..f5d7b688 100644
--- a/libnm/nm-settings-docs.xml
+++ b/libnm/nm-settings-docs.xml
@@ -21,7 +21,7 @@
     <property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." />
     <property name="secondaries" name_upper="SECONDARIES" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
     <property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." />
-    <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds the the interface name of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." />
+    <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds the the interface name of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." />
     <property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." />
     <property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." />
     <property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." />
@@ -199,6 +199,7 @@
     <property name="address-data" name_upper="ADDRESS_DATA" type="array of vardict" description="Array of IPv6 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses." />
     <property name="addresses" name_upper="ADDRESSES" type="array of legacy IPv6 address struct (a(ayuay))" default="[]" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet." />
     <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." />
+    <property name="dhcp-duid" name_upper="DHCP_DUID" type="string" description="A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value &quot;lease&quot; will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and &quot;dhclient&quot; is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values &quot;llt&quot; and &quot;ll&quot; will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values &quot;stable-llt&quot;, &quot;stable-ll&quot; and &quot;stable-uuid&quot; will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. So, the link-layer address of &quot;stable-ll&quot; and &quot;stable-llt&quot; will be a generated address derived from the stable id. The DUID-LLT time value in the &quot;stable-llt&quot; option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in &quot;llt&quot;). When the property is unset, the global value provided for &quot;ipv6.dhcp-duid&quot; is used. If no global value is provided, the default &quot;lease&quot; value is assumed." />
     <property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
@@ -245,6 +246,7 @@
     <property name="name" name_upper="NAME" type="string" default="macsec" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
     <property name="port" name_upper="PORT" type="int32" default="1" description="The port component of the SCI (Secure Channel Identifier), between 1 and 65534." />
+    <property name="send-sci" name_upper="SEND_SCI" type="boolean" default="TRUE" description="Specifies whether the SCI (Secure Channel Identifier) is included in every packet." />
     <property name="validation" name_upper="VALIDATION" type="int32" default="2" description="Specifies the validation mode for incoming frames." />
   </setting>
   <setting name="macvlan" description="MAC VLAN Settings" name_upper="MACVLAN" >
@@ -342,7 +344,7 @@
     <property name="name" name_upper="NAME" type="string" default="team" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="notify-peers-count" name_upper="NOTIFY_PEERS_COUNT" type="int32" default="0" description="Corresponds to the teamd notify_peers.count." />
     <property name="notify-peers-interval" name_upper="NOTIFY_PEERS_INTERVAL" type="int32" default="0" description="Corresponds to the teamd notify_peers.interval." />
-    <property name="runner" name_upper="RUNNER" type="string" default="&quot;roundrobin&quot;" description="Corresponds to the teamd runner.name. Permitted values are: &quot;roundrobin&quot;, &quot;broadcast&quot;, &quot;activebackup&quot;, &quot;loadbalance&quot;, &quot;lacp&quot;. When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value)." />
+    <property name="runner" name_upper="RUNNER" type="string" default="&quot;roundrobin&quot;" description="Corresponds to the teamd runner.name. Permitted values are: &quot;roundrobin&quot;, &quot;broadcast&quot;, &quot;activebackup&quot;, &quot;loadbalance&quot;, &quot;lacp&quot;, &quot;random&quot;. When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value)." />
     <property name="runner-active" name_upper="RUNNER_ACTIVE" type="boolean" default="FALSE" description="Corresponds to the teamd runner.active." />
     <property name="runner-agg-select-policy" name_upper="RUNNER_AGG_SELECT_POLICY" type="string" description="Corresponds to the teamd runner.agg_select_policy." />
     <property name="runner-fast-rate" name_upper="RUNNER_FAST_RATE" type="boolean" default="FALSE" description="Corresponds to the teamd runner.fast_rate." />
@@ -420,9 +422,9 @@
   </setting>
   <setting name="802-3-ethernet" description="Wired Ethernet Settings" name_upper="WIRED" >
     <property name="assigned-mac-address" name_upper="ASSIGNED_MAC_ADDRESS" type="string" description="The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; or &quot;stable&quot;. This field replaces the deprecated &quot;cloned-mac-address&quot; on D-Bus, which can only contain explict hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property &quot;cloned-mac-address&quot;." />
-    <property name="auto-negotiate" name_upper="AUTO_NEGOTIATE" type="boolean" default="FALSE" description="If TRUE, enforce auto-negotiation of port speed and duplex mode.  If FALSE, &quot;speed&quot; and &quot;duplex&quot; properties should be both set or link configuration will be skipped." />
+    <property name="auto-negotiate" name_upper="AUTO_NEGOTIATE" type="boolean" default="FALSE" description="When TRUE, enforce auto-negotiation of speed and duplex mode. If &quot;speed&quot; and &quot;duplex&quot; properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, &quot;speed&quot; and &quot;duplex&quot; properties should be both set or link configuration will be skipped." />
     <property name="cloned-mac-address" name_upper="CLONED_MAC_ADDRESS" type="byte array" description="This D-Bus field is deprecated in favor of &quot;assigned-mac-address&quot; which is more flexible and allows specifying special variants like &quot;random&quot;. For libnm and nmcli, this field is called &quot;cloned-mac-address&quot;." />
-    <property name="duplex" name_upper="DUPLEX" type="string" description="Can be specified only when &quot;auto-negotiate&quot; is &quot;off&quot;. In that case, statically configures the device to use that specified duplex mode, either &quot;half&quot; or &quot;full&quot;. Must be set together with the &quot;speed&quot; property if specified. Before specifying a duplex mode be sure your device supports it." />
+    <property name="duplex" name_upper="DUPLEX" type="string" description="When a value is set, either &quot;half&quot; or &quot;full&quot;, configures the device to use the specified duplex mode. If &quot;auto-negotiate&quot; is &quot;yes&quot; the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if &quot;auto-negotiate&quot; is &quot;no&quot;, the default) or will be auto-negotiated (if &quot;auto-negotiate&quot; is &quot;yes&quot;) and the local device will advertise all the supported duplex modes. Must be set together with the &quot;speed&quot; property if specified. Before specifying a duplex mode be sure your device supports it." />
     <property name="generate-mac-address-mask" name_upper="GENERATE_MAC_ADDRESS_MASK" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55)." />
@@ -432,7 +434,7 @@
     <property name="s390-nettype" name_upper="S390_NETTYPE" type="string" description="s390 network device type; one of &quot;qeth&quot;, &quot;lcs&quot;, or &quot;ctc&quot;, representing the different types of virtual network devices available on s390 systems." />
     <property name="s390-options" name_upper="S390_OPTIONS" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include &quot;portno&quot;, &quot;layer2&quot;, &quot;portname&quot;, &quot;protocol&quot;, among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
     <property name="s390-subchannels" name_upper="S390_SUBCHANNELS" type="array of string" default="[]" description="Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the &quot;mac-address&quot; property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character." />
-    <property name="speed" name_upper="SPEED" type="uint32" default="0" description="Can be set to a value greater than zero only when &quot;auto-negotiate&quot; is &quot;off&quot;. In that case, statically configures the device to use that specified speed. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the &quot;duplex&quot; property when non-zero. Before specifying a speed value be sure your device supports it." />
+    <property name="speed" name_upper="SPEED" type="uint32" default="0" description="When a value grater than 0 is set, configures the device to use the specified speed. If &quot;auto-negotiate&quot; is &quot;yes&quot; the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if &quot;auto-negotiate&quot; is &quot;no&quot;, the default) or will be auto-negotiated (if &quot;auto-negotiate&quot; is &quot;yes&quot;) and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the &quot;duplex&quot; property when non-zero. Before specifying a speed value be sure your device supports it." />
     <property name="wake-on-lan" name_upper="WAKE_ON_LAN" type="uint32" default="1" description="The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
     <property name="wake-on-lan-password" name_upper="WAKE_ON_LAN_PASSWORD" type="string" description="If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required." />
   </setting>
@@ -456,6 +458,7 @@
     <property name="seen-bssids" name_upper="SEEN_BSSIDS" type="array of string" default="[]" description="A list of BSSIDs (each BSSID formatted as a MAC address like &quot;00:11:22:33:44:55&quot;) that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved." />
     <property name="ssid" name_upper="SSID" type="byte array" description="SSID of the Wi-Fi network. Must be specified." />
     <property name="tx-power" name_upper="TX_POWER" type="uint32" default="0" description="If non-zero, directs the device to use the specified transmit power. Units are dBm.  This property is highly driver dependent and not all devices support setting a static transmit power." />
+    <property name="wake-on-wlan" name_upper="WAKE_ON_WLAN" type="uint32" default="1" description="The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
   </setting>
   <setting name="802-11-wireless-security" description="Wi-Fi Security Settings" name_upper="WIRELESS_SECURITY" >
     <property name="auth-alg" name_upper="AUTH_ALG" type="string" description="When WEP is used (ie, key-mgmt = &quot;none&quot; or &quot;ieee8021x&quot;) indicate the 802.11 authentication algorithm required by the AP here.  One of &quot;open&quot; for Open System, &quot;shared&quot; for Shared Key, or &quot;leap&quot; for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;) the &quot;leap-username&quot; and &quot;leap-password&quot; properties must be specified." />
-- 
cgit 1.3.0-6-gf8a5


From 429393567647935d9123e21fd27a7529d50255eb Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Sun, 1 Jul 2018 20:58:23 +0200
Subject: New upstream version 1.12.0

---
 libnm/nm-settings-docs.xml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'libnm/nm-settings-docs.xml')

diff --git a/libnm/nm-settings-docs.xml b/libnm/nm-settings-docs.xml
index f5d7b688..8deac083 100644
--- a/libnm/nm-settings-docs.xml
+++ b/libnm/nm-settings-docs.xml
@@ -269,13 +269,13 @@
     <property name="rstp-enable" name_upper="RSTP_ENABLE" type="boolean" default="FALSE" description="Enable or disable RSTP." />
     <property name="stp-enable" name_upper="STP_ENABLE" type="boolean" default="FALSE" description="Enable or disable STP." />
   </setting>
-  <setting name="ovs-interface" description="OpenVSwitch Interface Settings" name_upper="OVS_INTERFACE" >
+  <setting name="ovs-interface" description="Open vSwitch Interface Settings" name_upper="OVS_INTERFACE" >
     <property name="name" name_upper="NAME" type="string" default="ovs-interface" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, or empty." />
   </setting>
   <setting name="ovs-patch" description="OvsPatch Link Settings" name_upper="OVS_PATCH" >
     <property name="name" name_upper="NAME" type="string" default="ovs-patch" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
-    <property name="peer" name_upper="PEER" type="string" description="Specifies the unicast destination IP address of a remote OpenVSwitch bridge port to connect to." />
+    <property name="peer" name_upper="PEER" type="string" description="Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to." />
   </setting>
   <setting name="ovs-port" description="OvsPort Link Settings" name_upper="OVS_PORT" >
     <property name="bond-downdelay" name_upper="BOND_DOWNDELAY" type="uint32" default="0" description="The time port must be inactive in order to be considered down." />
-- 
cgit 1.3.0-6-gf8a5