From 2e5fa45ddfbb5cffa1e78221f1cea706e2f298af Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Wed, 31 Jul 2019 10:51:42 +0200
Subject: New upstream version 1.19.90

---
 libnm/nm-settings-docs.xml | 117 ++++++++++++++++++++++++---------------------
 1 file changed, 62 insertions(+), 55 deletions(-)

(limited to 'libnm/nm-settings-docs.xml')

diff --git a/libnm/nm-settings-docs.xml b/libnm/nm-settings-docs.xml
index 0f1d8c97..59141f96 100644
--- a/libnm/nm-settings-docs.xml
+++ b/libnm/nm-settings-docs.xml
@@ -18,21 +18,22 @@
     <property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved." />
     <property name="metered" name_upper="METERED" type="NMMetered (int32)" description="Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately." />
     <property name="multi-connect" name_upper="MULTI_CONNECT" type="int32" default="0" description="Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect." />
-    <property name="permissions" name_upper="PERMISSIONS" type="array of string" default="[]" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." />
+    <property name="permissions" name_upper="PERMISSIONS" type="array of string" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." />
     <property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." />
-    <property name="secondaries" name_upper="SECONDARIES" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
+    <property name="secondaries" name_upper="SECONDARIES" type="array of string" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
     <property name="slave-type" name_upper="SLAVE_TYPE" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." />
     <property name="stable-id" name_upper="STABLE_ID" type="string" description="This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${DEVICE}&quot;, &quot;${MAC}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that &quot;${DEVICE}&quot; corresponds to the interface name of the device and &quot;${MAC}&quot; is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}-${BOOT}-${DEVICE}&quot; to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to &quot;${CONNECTION}&quot; and uses a unique, fixed ID for the connection." />
     <property name="timestamp" name_upper="TIMESTAMP" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." />
     <property name="type" name_upper="TYPE" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." />
     <property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." />
+    <property name="wait-device-timeout" name_upper="WAIT_DEVICE_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time." />
     <property name="zone" name_upper="ZONE" type="string" description="The trust level of a the connection.  Free form case-insensitive string (for example &quot;Home&quot;, &quot;Work&quot;, &quot;Public&quot;).  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately." />
   </setting>
   <setting name="6lowpan" description="6LoWPAN Settings" name_upper="6LOWPAN" >
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created." />
   </setting>
   <setting name="802-1x" description="IEEE 802.1x Authentication Settings" name_upper="802_1X" >
-    <property name="altsubject-matches" name_upper="ALTSUBJECT_MATCHES" type="array of string" default="[]" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed." />
+    <property name="altsubject-matches" name_upper="ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed." />
     <property name="anonymous-identity" name_upper="ANONYMOUS_IDENTITY" type="string" description="Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS." />
     <property name="auth-timeout" name_upper="AUTH_TIMEOUT" type="int32" default="0" description="A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds." />
     <property name="ca-cert" name_upper="CA_CERT" type="byte array" description="Contains the CA certificate if used by the EAP method specified in the &quot;eap&quot; property. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended." />
@@ -43,7 +44,7 @@
     <property name="client-cert-password" name_upper="CLIENT_CERT_PASSWORD" type="string" description="The password used to access the client certificate stored in &quot;client-cert&quot; property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login." />
     <property name="client-cert-password-flags" name_upper="CLIENT_CERT_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;client-cert-password&quot; property." />
     <property name="domain-suffix-match" name_upper="DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison." />
-    <property name="eap" name_upper="EAP" type="array of string" default="[]" description="The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: &quot;leap&quot;, &quot;md5&quot;, &quot;tls&quot;, &quot;peap&quot;, &quot;ttls&quot;, &quot;pwd&quot;, and &quot;fast&quot;.  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations." />
+    <property name="eap" name_upper="EAP" type="array of string" description="The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: &quot;leap&quot;, &quot;md5&quot;, &quot;tls&quot;, &quot;peap&quot;, &quot;ttls&quot;, &quot;pwd&quot;, and &quot;fast&quot;.  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations." />
     <property name="identity" name_upper="IDENTITY" type="string" description="Identity string for EAP authentication methods.  Often the user's user or login name." />
     <property name="pac-file" name_upper="PAC_FILE" type="string" description="UTF-8 encoded file path containing PAC for EAP-FAST." />
     <property name="password" name_upper="PASSWORD" type="string" description="UTF-8 encoded password used for EAP authentication methods. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." />
@@ -54,7 +55,7 @@
     <property name="phase1-fast-provisioning" name_upper="PHASE1_FAST_PROVISIONING" type="string" description="Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the &quot;eap&quot; property. Recognized values are &quot;0&quot; (disabled), &quot;1&quot; (allow unauthenticated provisioning), &quot;2&quot; (allow authenticated provisioning), and &quot;3&quot; (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details." />
     <property name="phase1-peaplabel" name_upper="PHASE1_PEAPLABEL" type="string" description="Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to &quot;1&quot; to force use of the new PEAP label.  See the wpa_supplicant documentation for more details." />
     <property name="phase1-peapver" name_upper="PHASE1_PEAPVER" type="string" description="Forces which PEAP version is used when PEAP is set as the EAP method in the &quot;eap&quot; property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to &quot;0&quot; or &quot;1&quot; to force that specific PEAP version." />
-    <property name="phase2-altsubject-matches" name_upper="PHASE2_ALTSUBJECT_MATCHES" type="array of string" default="[]" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed." />
+    <property name="phase2-altsubject-matches" name_upper="PHASE2_ALTSUBJECT_MATCHES" type="array of string" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner &quot;phase 2&quot; authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed." />
     <property name="phase2-auth" name_upper="PHASE2_AUTH" type="string" description="Specifies the allowed &quot;phase 2&quot; inner non-EAP authentication methods when an EAP method that uses an inner TLS tunnel is specified in the &quot;eap&quot; property.  Recognized non-EAP &quot;phase 2&quot; methods are &quot;pap&quot;, &quot;chap&quot;, &quot;mschap&quot;, &quot;mschapv2&quot;, &quot;gtc&quot;, &quot;otp&quot;, &quot;md5&quot;, and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details." />
     <property name="phase2-autheap" name_upper="PHASE2_AUTHEAP" type="string" description="Specifies the allowed &quot;phase 2&quot; inner EAP-based authentication methods when an EAP method that uses an inner TLS tunnel is specified in the &quot;eap&quot; property.  Recognized EAP-based &quot;phase 2&quot; methods are &quot;md5&quot;, &quot;mschapv2&quot;, &quot;otp&quot;, &quot;gtc&quot;, and &quot;tls&quot;. Each &quot;phase 2&quot; inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details." />
     <property name="phase2-ca-cert" name_upper="PHASE2_CA_CERT" type="byte array" description="Contains the &quot;phase 2&quot; CA certificate if used by the EAP method specified in the &quot;phase2-auth&quot; or &quot;phase2-autheap&quot; properties. Certificate data is specified using a &quot;scheme&quot;; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string &quot;file://&quot; and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended." />
@@ -107,13 +108,13 @@
     <property name="stp" name_upper="STP" type="boolean" default="TRUE" description="Controls whether Spanning Tree Protocol (STP) is enabled for this bridge." />
     <property name="vlan-default-pvid" name_upper="VLAN_DEFAULT_PVID" type="uint32" default="1" description="The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames." />
     <property name="vlan-filtering" name_upper="VLAN_FILTERING" type="boolean" default="FALSE" description="Control whether VLAN filtering is enabled on the bridge." />
-    <property name="vlans" name_upper="VLANS" type="array of vardict" default="[]" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." />
+    <property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." />
   </setting>
   <setting name="bridge-port" description="Bridge Port Settings" name_upper="BRIDGE_PORT" >
     <property name="hairpin-mode" name_upper="HAIRPIN_MODE" type="boolean" default="FALSE" description="Enables or disables &quot;hairpin mode&quot; for the port, which allows frames to be sent back out through the port the frame was received on." />
     <property name="path-cost" name_upper="PATH_COST" type="uint32" default="100" description="The Spanning Tree Protocol (STP) port cost for destinations via this port." />
     <property name="priority" name_upper="PRIORITY" type="uint32" default="32" description="The Spanning Tree Protocol (STP) priority of this bridge port." />
-    <property name="vlans" name_upper="VLANS" type="array of vardict" default="[]" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." />
+    <property name="vlans" name_upper="VLANS" type="array of vardict" description="Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash." />
   </setting>
   <setting name="cdma" description="CDMA-based Mobile Broadband Settings" name_upper="CDMA" >
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." />
@@ -130,14 +131,14 @@
     <property name="app-fip-priority" name_upper="APP_FIP_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the &quot;app-fip-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." />
     <property name="app-iscsi-flags" name_upper="APP_ISCSI_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
     <property name="app-iscsi-priority" name_upper="APP_ISCSI_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the &quot;app-iscsi-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." />
-    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
-    <property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." />
+    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
+    <property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." />
     <property name="priority-flow-control-flags" name_upper="PRIORITY_FLOW_CONTROL_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
+    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
     <property name="priority-group-flags" name_upper="PRIORITY_GROUP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
-    <property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." />
-    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
+    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
+    <property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." />
+    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
   </setting>
   <setting name="dummy" description="Dummy Link Settings" name_upper="DUMMY" >
   </setting>
@@ -169,52 +170,52 @@
   </setting>
   <setting name="ipv4" description="IPv4 Settings" name_upper="IP4_CONFIG" >
     <property name="address-data" name_upper="ADDRESS_DATA" type="array of vardict" description="Array of IPv4 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses." />
-    <property name="addresses" name_upper="ADDRESSES" type="array of array of uint32" default="[]" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet." />
+    <property name="addresses" name_upper="ADDRESSES" type="array of array of uint32" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet." />
     <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." />
     <property name="dhcp-client-id" name_upper="DHCP_CLIENT_ID" type="string" description="A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values &quot;mac&quot; and &quot;perm-mac&quot; are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value &quot;duid&quot; generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value &quot;stable&quot; is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin." />
     <property name="dhcp-fqdn" name_upper="DHCP_FQDN" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-hostname&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
-    <property name="dns" name_upper="DNS" type="array of uint32" default="[]" description="Array of IP addresses of DNS servers (as network-byte-order integers)" />
-    <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
-    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
+    <property name="dns" name_upper="DNS" type="array of uint32" description="Array of IP addresses of DNS servers (as network-byte-order integers)" />
+    <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
+    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
+    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
     <property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
     <property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." />
-    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
+    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
     <property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." />
     <property name="route-data" name_upper="ROUTE_DATA" type="array of vardict" description="Array of IPv4 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'gateway' entry, containing the gateway IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes." />
     <property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." />
     <property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." />
-    <property name="routes" name_upper="ROUTES" type="array of array of uint32" default="[]" description="Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv4 route structures.  Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)" />
+    <property name="routes" name_upper="ROUTES" type="array of array of uint32" description="Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv4 route structures.  Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)" />
   </setting>
   <setting name="ipv6" description="IPv6 Settings" name_upper="IP6_CONFIG" >
     <property name="addr-gen-mode" name_upper="ADDR_GEN_MODE" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." />
     <property name="address-data" name_upper="ADDRESS_DATA" type="array of vardict" description="Array of IPv6 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses." />
-    <property name="addresses" name_upper="ADDRESSES" type="array of legacy IPv6 address struct (a(ayuay))" default="[]" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet." />
+    <property name="addresses" name_upper="ADDRESSES" type="array of legacy IPv6 address struct (a(ayuay))" description="Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet." />
     <property name="dad-timeout" name_upper="DAD_TIMEOUT" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4." />
     <property name="dhcp-duid" name_upper="DHCP_DUID" type="string" description="A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value &quot;lease&quot; will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and &quot;dhclient&quot; is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values &quot;llt&quot; and &quot;ll&quot; will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values &quot;stable-llt&quot;, &quot;stable-ll&quot; and &quot;stable-uuid&quot; will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the &quot;${DEVICE}&quot; or &quot;${MAC}&quot; specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of &quot;stable-ll&quot; and &quot;stable-llt&quot; will be a generated address derived from the stable id. The DUID-LLT time value in the &quot;stable-llt&quot; option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in &quot;llt&quot;). When the property is unset, the global value provided for &quot;ipv6.dhcp-duid&quot; is used. If no global value is provided, the default &quot;lease&quot; value is assumed." />
     <property name="dhcp-hostname" name_upper="DHCP_HOSTNAME" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" name_upper="DHCP_SEND_HOSTNAME" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" name_upper="DHCP_TIMEOUT" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
-    <property name="dns" name_upper="DNS" type="array of byte array" default="[]" description="Array of IP addresses of DNS servers (in network byte order)" />
-    <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
-    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" default="[]" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
+    <property name="dns" name_upper="DNS" type="array of byte array" description="Array of IP addresses of DNS servers (in network byte order)" />
+    <property name="dns-options" name_upper="DNS_OPTIONS" type="array of string" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
+    <property name="dns-priority" name_upper="DNS_PRIORITY" type="int32" default="0" description="DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored." />
+    <property name="dns-search" name_upper="DNS_SEARCH" type="array of string" description="Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names." />
     <property name="gateway" name_upper="GATEWAY" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
     <property name="ip6-privacy" name_upper="IP6_PRIVACY" type="NMSettingIP6ConfigPrivacy (int32)" description="Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to &quot;-1&quot; (unknown) means fallback to global configuration &quot;ipv6.ip6-privacy&quot;. If also global configuration is unspecified or set to &quot;-1&quot;, fallback to read &quot;/proc/sys/net/ipv6/conf/default/use_tempaddr&quot;. Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the &quot;addr-gen-mode&quot; property's &quot;stable-privacy&quot; setting as another way of avoiding host tracking with IPv6 addresses." />
     <property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." />
-    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
+    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;disabled&quot;, &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
     <property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." />
     <property name="route-data" name_upper="ROUTE_DATA" type="array of vardict" description="Array of IPv6 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'next-hop' entry, containing the next hop IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes." />
     <property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." />
     <property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." />
-    <property name="routes" name_upper="ROUTES" type="array of legacy IPv6 route struct (a(ayuayu))" default="[]" description="Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv6 route structures.  Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device." />
+    <property name="routes" name_upper="ROUTES" type="array of legacy IPv6 route struct (a(ayuayu))" description="Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv6 route structures.  Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device." />
     <property name="token" name_upper="TOKEN" type="string" description="Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode." />
   </setting>
   <setting name="ip-tunnel" description="IP Tunneling Settings" name_upper="IP_TUNNEL" >
@@ -250,7 +251,7 @@
     <property name="tap" name_upper="TAP" type="boolean" default="FALSE" description="Whether the interface should be a MACVTAP." />
   </setting>
   <setting name="match" description="Match settings." name_upper="MATCH" >
-    <property name="interface-name" name_upper="INTERFACE_NAME" type="array of string" default="[]" description="A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match." />
+    <property name="interface-name" name_upper="INTERFACE_NAME" type="array of string" description="A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match." />
   </setting>
   <setting name="802-11-olpc-mesh" description="OLPC Wireless Mesh Settings" name_upper="OLPC_MESH" >
     <property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Channel on which the mesh network to join is located." />
@@ -258,13 +259,17 @@
     <property name="ssid" name_upper="SSID" type="byte array" description="SSID of the mesh network to join." />
   </setting>
   <setting name="ovs-bridge" description="OvsBridge Link Settings" name_upper="OVS_BRIDGE" >
+    <property name="datapath-type" name_upper="DATAPATH_TYPE" type="string" description="The data path type. One of &quot;system&quot;, &quot;netdev&quot; or empty." />
     <property name="fail-mode" name_upper="FAIL_MODE" type="string" description="The bridge failure mode. One of &quot;secure&quot;, &quot;standalone&quot; or empty." />
     <property name="mcast-snooping-enable" name_upper="MCAST_SNOOPING_ENABLE" type="boolean" default="FALSE" description="Enable or disable multicast snooping." />
     <property name="rstp-enable" name_upper="RSTP_ENABLE" type="boolean" default="FALSE" description="Enable or disable RSTP." />
     <property name="stp-enable" name_upper="STP_ENABLE" type="boolean" default="FALSE" description="Enable or disable STP." />
   </setting>
+  <setting name="ovs-dpdk" description="OvsDpdk Link Settings" name_upper="OVS_DPDK" >
+    <property name="devargs" name_upper="DEVARGS" type="string" description="Open vSwitch DPDK device arguments." />
+  </setting>
   <setting name="ovs-interface" description="Open vSwitch Interface Settings" name_upper="OVS_INTERFACE" >
-    <property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, or empty." />
+    <property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, &quot;system&quot;, &quot;patch&quot;, &quot;dpdk&quot;, or empty." />
   </setting>
   <setting name="ovs-patch" description="OvsPatch Link Settings" name_upper="OVS_PATCH" >
     <property name="peer" name_upper="PEER" type="string" description="Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to." />
@@ -320,22 +325,22 @@
   <setting name="sriov" description="SR-IOV settings." name_upper="SRIOV" >
     <property name="autoprobe-drivers" name_upper="AUTOPROBE_DRIVERS" type="NMTernary (int32)" description="Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1)." />
     <property name="total-vfs" name_upper="TOTAL_VFS" type="uint32" default="0" description="The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface also when it is zero. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection." />
-    <property name="vfs" name_upper="VFS" type="array of vardict" default="[]" description="Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: &quot;INDEX [ATTR=VALUE[ ATTR=VALUE]...]&quot;. for example: &quot;2 mac=00:11:22:33:44:55 spoof-check=true&quot;. Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The &quot;vlans&quot; attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form &quot;ID[.PRIORITY[.PROTO]]&quot;. PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad." />
+    <property name="vfs" name_upper="VFS" type="array of vardict" description="Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: &quot;INDEX [ATTR=VALUE[ ATTR=VALUE]...]&quot;. for example: &quot;2 mac=00:11:22:33:44:55 spoof-check=true&quot;. Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The &quot;vlans&quot; attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form &quot;ID[.PRIORITY[.PROTO]]&quot;. PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad." />
   </setting>
   <setting name="tc" description="Linux Traffic Control Settings." name_upper="TC_CONFIG" >
-    <property name="qdiscs" name_upper="QDISCS" type="array of vardict" default="[]" description="Array of TC queueing disciplines." />
-    <property name="tfilters" name_upper="TFILTERS" type="array of vardict" default="[]" description="Array of TC traffic filters." />
+    <property name="qdiscs" name_upper="QDISCS" type="array of vardict" description="Array of TC queueing disciplines." />
+    <property name="tfilters" name_upper="TFILTERS" type="array of vardict" description="Array of TC traffic filters." />
   </setting>
   <setting name="team" description="Teaming Settings" name_upper="TEAM" >
     <property name="config" name_upper="CONFIG" type="string" description="The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details." />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the team's interface name." />
-    <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" default="[]" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details." />
-    <property name="mcast-rejoin-count" name_upper="MCAST_REJOIN_COUNT" type="int32" default="0" description="Corresponds to the teamd mcast_rejoin.count." />
-    <property name="mcast-rejoin-interval" name_upper="MCAST_REJOIN_INTERVAL" type="int32" default="0" description="Corresponds to the teamd mcast_rejoin.interval." />
-    <property name="notify-peers-count" name_upper="NOTIFY_PEERS_COUNT" type="int32" default="0" description="Corresponds to the teamd notify_peers.count." />
-    <property name="notify-peers-interval" name_upper="NOTIFY_PEERS_INTERVAL" type="int32" default="0" description="Corresponds to the teamd notify_peers.interval." />
-    <property name="runner" name_upper="RUNNER" type="string" default="&quot;roundrobin&quot;" description="Corresponds to the teamd runner.name. Permitted values are: &quot;roundrobin&quot;, &quot;broadcast&quot;, &quot;activebackup&quot;, &quot;loadbalance&quot;, &quot;lacp&quot;, &quot;random&quot;. When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value)." />
-    <property name="runner-active" name_upper="RUNNER_ACTIVE" type="boolean" default="FALSE" description="Corresponds to the teamd runner.active." />
+    <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details." />
+    <property name="mcast-rejoin-count" name_upper="MCAST_REJOIN_COUNT" type="int32" default="-1" description="Corresponds to the teamd mcast_rejoin.count." />
+    <property name="mcast-rejoin-interval" name_upper="MCAST_REJOIN_INTERVAL" type="int32" default="-1" description="Corresponds to the teamd mcast_rejoin.interval." />
+    <property name="notify-peers-count" name_upper="NOTIFY_PEERS_COUNT" type="int32" default="-1" description="Corresponds to the teamd notify_peers.count." />
+    <property name="notify-peers-interval" name_upper="NOTIFY_PEERS_INTERVAL" type="int32" default="-1" description="Corresponds to the teamd notify_peers.interval." />
+    <property name="runner" name_upper="RUNNER" type="string" description="Corresponds to the teamd runner.name. Permitted values are: &quot;roundrobin&quot;, &quot;broadcast&quot;, &quot;activebackup&quot;, &quot;loadbalance&quot;, &quot;lacp&quot;, &quot;random&quot;." />
+    <property name="runner-active" name_upper="RUNNER_ACTIVE" type="boolean" default="TRUE" description="Corresponds to the teamd runner.active." />
     <property name="runner-agg-select-policy" name_upper="RUNNER_AGG_SELECT_POLICY" type="string" description="Corresponds to the teamd runner.agg_select_policy." />
     <property name="runner-fast-rate" name_upper="RUNNER_FAST_RATE" type="boolean" default="FALSE" description="Corresponds to the teamd runner.fast_rate." />
     <property name="runner-hwaddr-policy" name_upper="RUNNER_HWADDR_POLICY" type="string" description="Corresponds to the teamd runner.hwaddr_policy." />
@@ -343,13 +348,13 @@
     <property name="runner-sys-prio" name_upper="RUNNER_SYS_PRIO" type="int32" default="-1" description="Corresponds to the teamd runner.sys_prio." />
     <property name="runner-tx-balancer" name_upper="RUNNER_TX_BALANCER" type="string" description="Corresponds to the teamd runner.tx_balancer.name." />
     <property name="runner-tx-balancer-interval" name_upper="RUNNER_TX_BALANCER_INTERVAL" type="int32" default="-1" description="Corresponds to the teamd runner.tx_balancer.interval." />
-    <property name="runner-tx-hash" name_upper="RUNNER_TX_HASH" type="array of string" default="[]" description="Corresponds to the teamd runner.tx_hash." />
+    <property name="runner-tx-hash" name_upper="RUNNER_TX_HASH" type="array of string" description="Corresponds to the teamd runner.tx_hash." />
   </setting>
   <setting name="team-port" description="Team Port Settings" name_upper="TEAM_PORT" >
     <property name="config" name_upper="CONFIG" type="string" description="The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details." />
-    <property name="lacp-key" name_upper="LACP_KEY" type="int32" default="0" description="Corresponds to the teamd ports.PORTIFNAME.lacp_key." />
-    <property name="lacp-prio" name_upper="LACP_PRIO" type="int32" default="255" description="Corresponds to the teamd ports.PORTIFNAME.lacp_prio." />
-    <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" default="[]" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details." />
+    <property name="lacp-key" name_upper="LACP_KEY" type="int32" default="-1" description="Corresponds to the teamd ports.PORTIFNAME.lacp_key." />
+    <property name="lacp-prio" name_upper="LACP_PRIO" type="int32" default="-1" description="Corresponds to the teamd ports.PORTIFNAME.lacp_prio." />
+    <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details." />
     <property name="prio" name_upper="PRIO" type="int32" default="0" description="Corresponds to the teamd ports.PORTIFNAME.prio." />
     <property name="queue-id" name_upper="QUEUE_ID" type="int32" default="-1" description="Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config." />
     <property name="sticky" name_upper="STICKY" type="boolean" default="FALSE" description="Corresponds to the teamd ports.PORTIFNAME.sticky." />
@@ -366,10 +371,10 @@
     <property name="data" name_upper="DATA" type="dict of string to string" default="{}" description="A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length." />
   </setting>
   <setting name="vlan" description="VLAN Settings" name_upper="VLAN" >
-    <property name="egress-priority-map" name_upper="EGRESS_PRIORITY_MAP" type="array of string" default="[]" description="For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
+    <property name="egress-priority-map" name_upper="EGRESS_PRIORITY_MAP" type="array of string" description="For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
     <property name="flags" name_upper="FLAGS" type="NMVlanFlags (uint32)" description="One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0." />
     <property name="id" name_upper="ID" type="uint32" default="0" description="The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095." />
-    <property name="ingress-priority-map" name_upper="INGRESS_PRIORITY_MAP" type="array of string" default="[]" description="For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
+    <property name="ingress-priority-map" name_upper="INGRESS_PRIORITY_MAP" type="array of string" description="For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the vlan's interface name." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
   </setting>
@@ -415,18 +420,20 @@
     <property name="duplex" name_upper="DUPLEX" type="string" description="When a value is set, either &quot;half&quot; or &quot;full&quot;, configures the device to use the specified duplex mode. If &quot;auto-negotiate&quot; is &quot;yes&quot; the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if &quot;auto-negotiate&quot; is &quot;no&quot;, the default) or will be auto-negotiated (if &quot;auto-negotiate&quot; is &quot;yes&quot;) and the local device will advertise all the supported duplex modes. Must be set together with the &quot;speed&quot; property if specified. Before specifying a duplex mode be sure your device supports it." />
     <property name="generate-mac-address-mask" name_upper="GENERATE_MAC_ADDRESS_MASK" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
-    <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55)." />
+    <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" description="If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55)." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
     <property name="port" name_upper="PORT" type="string" description="Specific port type to use if the device supports multiple attachment methods.  One of &quot;tp&quot; (Twisted Pair), &quot;aui&quot; (Attachment Unit Interface), &quot;bnc&quot; (Thin Ethernet) or &quot;mii&quot; (Media Independent Interface). If the device supports only one port type, this setting is ignored." />
     <property name="s390-nettype" name_upper="S390_NETTYPE" type="string" description="s390 network device type; one of &quot;qeth&quot;, &quot;lcs&quot;, or &quot;ctc&quot;, representing the different types of virtual network devices available on s390 systems." />
     <property name="s390-options" name_upper="S390_OPTIONS" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include &quot;portno&quot;, &quot;layer2&quot;, &quot;portname&quot;, &quot;protocol&quot;, among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
-    <property name="s390-subchannels" name_upper="S390_SUBCHANNELS" type="array of string" default="[]" description="Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the &quot;mac-address&quot; property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character." />
+    <property name="s390-subchannels" name_upper="S390_SUBCHANNELS" type="array of string" description="Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the &quot;mac-address&quot; property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character." />
     <property name="speed" name_upper="SPEED" type="uint32" default="0" description="When a value grater than 0 is set, configures the device to use the specified speed. If &quot;auto-negotiate&quot; is &quot;yes&quot; the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if &quot;auto-negotiate&quot; is &quot;no&quot;, the default) or will be auto-negotiated (if &quot;auto-negotiate&quot; is &quot;yes&quot;) and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the &quot;duplex&quot; property when non-zero. Before specifying a speed value be sure your device supports it." />
     <property name="wake-on-lan" name_upper="WAKE_ON_LAN" type="uint32" default="1" description="The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
     <property name="wake-on-lan-password" name_upper="WAKE_ON_LAN_PASSWORD" type="string" description="If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required." />
   </setting>
-  <setting name="wireguard" description="WireGuard Ethernet Settings" name_upper="WIREGUARD" >
-    <property name="fwmark" name_upper="FWMARK" type="uint32" default="0" description="The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets." />
+  <setting name="wireguard" description="WireGuard Settings" name_upper="WIREGUARD" >
+    <property name="fwmark" name_upper="FWMARK" type="uint32" default="0" description="The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that &quot;ip4-auto-default-route&quot; or &quot;ip6-auto-default-route&quot; enabled, implies to automatically choose a fwmark." />
+    <property name="ip4-auto-default-route" name_upper="IP4_AUTO_DEFAULT_ROUTE" type="NMTernary (int32)" description="Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, a unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips." />
+    <property name="ip6-auto-default-route" name_upper="IP6_AUTO_DEFAULT_ROUTE" type="NMTernary (int32)" description="Like ip4-auto-default-route, but for the IPv6 default route." />
     <property name="listen-port" name_upper="LISTEN_PORT" type="uint32" default="0" description="The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation." />
     <property name="peer-routes" name_upper="PEER_ROUTES" type="boolean" default="TRUE" description="Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively." />
@@ -443,14 +450,14 @@
     <property name="generate-mac-address-mask" name_upper="GENERATE_MAC_ADDRESS_MASK" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
     <property name="hidden" name_upper="HIDDEN" type="boolean" default="FALSE" description="If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air." />
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
-    <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg &quot;00:11:22:33:44:55&quot;)." />
+    <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" description="A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg &quot;00:11:22:33:44:55&quot;)." />
     <property name="mac-address-randomization" name_upper="MAC_ADDRESS_RANDOMIZATION" type="uint32" default="0" description="One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1" />
-    <property name="mode" name_upper="MODE" type="string" description="Wi-Fi network mode; one of &quot;infrastructure&quot;, &quot;adhoc&quot; or &quot;ap&quot;.  If blank, infrastructure is assumed." />
+    <property name="mode" name_upper="MODE" type="string" description="Wi-Fi network mode; one of &quot;infrastructure&quot;, &quot;mesh&quot;, &quot;adhoc&quot; or &quot;ap&quot;.  If blank, infrastructure is assumed." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
     <property name="powersave" name_upper="POWERSAVE" type="uint32" default="0" description="One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved." />
     <property name="rate" name_upper="RATE" type="uint32" default="0" description="If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate." />
     <property name="security" name_upper="SECURITY" type="None" description="This property is deprecated, but can be set to the value '802-11-wireless-security' when a wireless security setting is also present in the connection dictionary, for compatibility with very old NetworkManager daemons." />
-    <property name="seen-bssids" name_upper="SEEN_BSSIDS" type="array of string" default="[]" description="A list of BSSIDs (each BSSID formatted as a MAC address like &quot;00:11:22:33:44:55&quot;) that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved." />
+    <property name="seen-bssids" name_upper="SEEN_BSSIDS" type="array of string" description="A list of BSSIDs (each BSSID formatted as a MAC address like &quot;00:11:22:33:44:55&quot;) that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved." />
     <property name="ssid" name_upper="SSID" type="byte array" description="SSID of the Wi-Fi network. Must be specified." />
     <property name="tx-power" name_upper="TX_POWER" type="uint32" default="0" description="If non-zero, directs the device to use the specified transmit power. Units are dBm.  This property is highly driver dependent and not all devices support setting a static transmit power." />
     <property name="wake-on-wlan" name_upper="WAKE_ON_WLAN" type="uint32" default="1" description="The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
@@ -458,14 +465,14 @@
   <setting name="802-11-wireless-security" description="Wi-Fi Security Settings" name_upper="WIRELESS_SECURITY" >
     <property name="auth-alg" name_upper="AUTH_ALG" type="string" description="When WEP is used (ie, key-mgmt = &quot;none&quot; or &quot;ieee8021x&quot;) indicate the 802.11 authentication algorithm required by the AP here.  One of &quot;open&quot; for Open System, &quot;shared&quot; for Shared Key, or &quot;leap&quot; for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;) the &quot;leap-username&quot; and &quot;leap-password&quot; properties must be specified." />
     <property name="fils" name_upper="FILS" type="int32" default="0" description="Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled." />
-    <property name="group" name_upper="GROUP" type="array of string" default="[]" description="A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of &quot;wep40&quot;, &quot;wep104&quot;, &quot;tkip&quot;, or &quot;ccmp&quot;." />
+    <property name="group" name_upper="GROUP" type="array of string" description="A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of &quot;wep40&quot;, &quot;wep104&quot;, &quot;tkip&quot;, or &quot;ccmp&quot;." />
     <property name="key-mgmt" name_upper="KEY_MGMT" type="string" description="Key management used for the connection.  One of &quot;none&quot; (WEP), &quot;ieee8021x&quot; (Dynamic WEP), &quot;wpa-none&quot; (Ad-Hoc WPA-PSK), &quot;wpa-psk&quot; (infrastructure WPA-PSK), &quot;sae&quot; (SAE) or &quot;wpa-eap&quot; (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security." />
     <property name="leap-password" name_upper="LEAP_PASSWORD" type="string" description="The login password for legacy LEAP connections (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;)." />
     <property name="leap-password-flags" name_upper="LEAP_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;leap-password&quot; property." />
     <property name="leap-username" name_upper="LEAP_USERNAME" type="string" description="The login username for legacy LEAP connections (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;)." />
-    <property name="pairwise" name_upper="PAIRWISE" type="array of string" default="[]" description="A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of &quot;tkip&quot; or &quot;ccmp&quot;." />
+    <property name="pairwise" name_upper="PAIRWISE" type="array of string" description="A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of &quot;tkip&quot; or &quot;ccmp&quot;." />
     <property name="pmf" name_upper="PMF" type="int32" default="0" description="Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled." />
-    <property name="proto" name_upper="PROTO" type="array of string" default="[]" description="List of strings specifying the allowed WPA protocol versions to use. Each element may be one &quot;wpa&quot; (allow WPA) or &quot;rsn&quot; (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed." />
+    <property name="proto" name_upper="PROTO" type="array of string" description="List of strings specifying the allowed WPA protocol versions to use. Each element may be one &quot;wpa&quot; (allow WPA) or &quot;rsn&quot; (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed." />
     <property name="psk" name_upper="PSK" type="string" description="Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication." />
     <property name="psk-flags" name_upper="PSK_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;psk&quot; property." />
     <property name="wep-key-flags" name_upper="WEP_KEY_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;wep-key0&quot;, &quot;wep-key1&quot;, &quot;wep-key2&quot;, and &quot;wep-key3&quot; properties." />
-- 
cgit 1.3.0-6-gf8a5