From 6518e361171f64bcaaa4bf868139362ed95cc2e0 Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Sat, 20 Oct 2018 01:30:31 +0200
Subject: New upstream version 1.14.2

---
 libnm/nm-property-docs.xml | 79 ++++++++++++++++++----------------------------
 1 file changed, 30 insertions(+), 49 deletions(-)

(limited to 'libnm/nm-property-docs.xml')

diff --git a/libnm/nm-property-docs.xml b/libnm/nm-property-docs.xml
index 78d62e87..22aed0ea 100644
--- a/libnm/nm-property-docs.xml
+++ b/libnm/nm-property-docs.xml
@@ -13,10 +13,11 @@
     <property name="id" name_upper="ID" type="string" description="A human readable unique identifier for the connection, like &quot;Work Wi-Fi&quot; or &quot;T-Mobile 3G&quot;." />
     <property name="interface-name" name_upper="INTERFACE_NAME" type="string" description="The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface." />
     <property name="lldp" name_upper="LLDP" type="int32" default="-1" description="Whether LLDP is enabled for the connection." />
+    <property name="llmnr" name_upper="LLMNR" type="int32" default="-1" description="Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: yes: register hostname and resolving for the connection, no: disable LLMNR for the interface, resolve: do not register hostname but allow resolving of LLMNR host names. This feature requires a plugin which supports LLMNR. One such plugin is dns-systemd-resolved." />
     <property name="master" name_upper="MASTER" type="string" description="Interface name of the master device or UUID of the master connection." />
-    <property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. When updating this property on a currently activated connection, the change takes effect immediately. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved." />
+    <property name="mdns" name_upper="MDNS" type="int32" default="-1" description="Whether mDNS is enabled for the connection. The permitted values are: yes: register hostname and resolving for the connection, no: disable mDNS for the interface, resolve: do not register hostname but allow resolving of mDNS host names. This feature requires a plugin which supports mDNS. One such plugin is dns-systemd-resolved." />
     <property name="metered" name_upper="METERED" type="NMMetered (int32)" description="Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately." />
-    <property name="name" name_upper="NAME" type="string" default="connection" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+    <property name="multi-connect" name_upper="MULTI_CONNECT" type="int32" default="0" description="Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect." />
     <property name="permissions" name_upper="PERMISSIONS" type="array of string" default="[]" description="An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form &quot;[type]:[id]:[reserved]&quot;; for example, &quot;user:dcbw:blah&quot;. At this time only the &quot;user&quot; [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the &quot;:&quot; character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8." />
     <property name="read-only" name_upper="READ_ONLY" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." />
     <property name="secondaries" name_upper="SECONDARIES" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
@@ -27,6 +28,9 @@
     <property name="uuid" name_upper="UUID" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." />
     <property name="zone" name_upper="ZONE" type="string" description="The trust level of a the connection.  Free form case-insensitive string (for example &quot;Home&quot;, &quot;Work&quot;, &quot;Public&quot;).  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately." />
   </setting>
+  <setting name="6lowpan" description="6LoWPAN Settings" name_upper="6LOWPAN" >
+    <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created." />
+  </setting>
   <setting name="802-1x" description="IEEE 802.1x Authentication Settings" name_upper="802_1X" >
     <property name="altsubject-matches" name_upper="ALTSUBJECT_MATCHES" type="array of string" default="[]" description="List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed." />
     <property name="anonymous-identity" name_upper="ANONYMOUS_IDENTITY" type="string" description="Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS." />
@@ -41,7 +45,6 @@
     <property name="domain-suffix-match" name_upper="DOMAIN_SUFFIX_MATCH" type="string" description="Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison." />
     <property name="eap" name_upper="EAP" type="array of string" default="[]" description="The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: &quot;leap&quot;, &quot;md5&quot;, &quot;tls&quot;, &quot;peap&quot;, &quot;ttls&quot;, &quot;pwd&quot;, and &quot;fast&quot;.  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations." />
     <property name="identity" name_upper="IDENTITY" type="string" description="Identity string for EAP authentication methods.  Often the user's user or login name." />
-    <property name="name" name_upper="NAME" type="string" default="802-1x" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="pac-file" name_upper="PAC_FILE" type="string" description="UTF-8 encoded file path containing PAC for EAP-FAST." />
     <property name="password" name_upper="PASSWORD" type="string" description="UTF-8 encoded password used for EAP authentication methods. If both the &quot;password&quot; property and the &quot;password-raw&quot; property are specified, &quot;password&quot; is preferred." />
     <property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." />
@@ -76,7 +79,6 @@
   </setting>
   <setting name="adsl" description="ADSL Settings" name_upper="ADSL" >
     <property name="encapsulation" name_upper="ENCAPSULATION" type="string" description="Encapsulation of ADSL connection.  Can be &quot;vcmux&quot; or &quot;llc&quot;." />
-    <property name="name" name_upper="NAME" type="string" default="adsl" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the ADSL service." />
     <property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." />
     <property name="protocol" name_upper="PROTOCOL" type="string" description="ADSL connection protocol.  Can be &quot;pppoa&quot;, &quot;pppoe&quot; or &quot;ipoatm&quot;." />
@@ -86,11 +88,9 @@
   </setting>
   <setting name="bluetooth" description="Bluetooth Settings" name_upper="BLUETOOTH" >
     <property name="bdaddr" name_upper="BDADDR" type="byte array" description="The Bluetooth address of the device." />
-    <property name="name" name_upper="NAME" type="string" default="bluetooth" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="type" name_upper="TYPE" type="string" description="Either &quot;dun&quot; for Dial-Up Networking connections or &quot;panu&quot; for Personal Area Networking connections to devices supporting the NAP profile." />
   </setting>
   <setting name="bond" description="Bonding Settings" name_upper="BOND" >
-    <property name="name" name_upper="NAME" type="string" default="bond" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="options" name_upper="OPTIONS" type="dict of string to string" default="{'mode': 'balance-rr'}" description="Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
   </setting>
   <setting name="bridge" description="Bridging Settings" name_upper="BRIDGE" >
@@ -101,19 +101,16 @@
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the &quot;ethernet.cloned-mac-address&quot; is referred instead to generate the initial MAC address. Note that setting &quot;ethernet.cloned-mac-address&quot; anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1" />
     <property name="max-age" name_upper="MAX_AGE" type="uint32" default="20" description="The Spanning Tree Protocol (STP) maximum message age, in seconds." />
     <property name="multicast-snooping" name_upper="MULTICAST_SNOOPING" type="boolean" default="TRUE" description="Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved." />
-    <property name="name" name_upper="NAME" type="string" default="bridge" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="priority" name_upper="PRIORITY" type="uint32" default="32768" description="Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are &quot;better&quot;; the lowest priority bridge will be elected the root bridge." />
     <property name="stp" name_upper="STP" type="boolean" default="TRUE" description="Controls whether Spanning Tree Protocol (STP) is enabled for this bridge." />
   </setting>
   <setting name="bridge-port" description="Bridge Port Settings" name_upper="BRIDGE_PORT" >
     <property name="hairpin-mode" name_upper="HAIRPIN_MODE" type="boolean" default="FALSE" description="Enables or disables &quot;hairpin mode&quot; for the port, which allows frames to be sent back out through the port the frame was received on." />
-    <property name="name" name_upper="NAME" type="string" default="bridge-port" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="path-cost" name_upper="PATH_COST" type="uint32" default="100" description="The Spanning Tree Protocol (STP) port cost for destinations via this port." />
     <property name="priority" name_upper="PRIORITY" type="uint32" default="32" description="The Spanning Tree Protocol (STP) priority of this bridge port." />
   </setting>
   <setting name="cdma" description="CDMA-based Mobile Broadband Settings" name_upper="CDMA" >
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." />
-    <property name="name" name_upper="NAME" type="string" default="cdma" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="number" name_upper="NUMBER" type="string" description="The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required." />
     <property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." />
     <property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." />
@@ -127,28 +124,26 @@
     <property name="app-fip-priority" name_upper="APP_FIP_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the &quot;app-fip-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." />
     <property name="app-iscsi-flags" name_upper="APP_ISCSI_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
     <property name="app-iscsi-priority" name_upper="APP_ISCSI_PRIORITY" type="int32" default="-1" description="The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the &quot;app-iscsi-flags&quot; property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag." />
-    <property name="name" name_upper="NAME" type="string" default="dcb" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
-    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
+    <property name="priority-bandwidth" name_upper="PRIORITY_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents." />
     <property name="priority-flow-control" name_upper="PRIORITY_FLOW_CONTROL" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause." />
     <property name="priority-flow-control-flags" name_upper="PRIORITY_FLOW_CONTROL_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
+    <property name="priority-group-bandwidth" name_upper="PRIORITY_GROUP_BANDWIDTH" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents." />
     <property name="priority-group-flags" name_upper="PRIORITY_GROUP_FLAGS" type="NMSettingDcbFlags (uint32)" description="Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4)." />
-    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
+    <property name="priority-group-id" name_upper="PRIORITY_GROUP_ID" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group." />
     <property name="priority-strict-bandwidth" name_upper="PRIORITY_STRICT_BANDWIDTH" type="array of uint32" default="[False, False, False, False, False, False, False, False]" description="An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group." />
-    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" default="[0L, 0L, 0L, 0L, 0L, 0L, 0L, 0L]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
+    <property name="priority-traffic-class" name_upper="PRIORITY_TRAFFIC_CLASS" type="array of uint32" default="[0, 0, 0, 0, 0, 0, 0, 0]" description="An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped." />
   </setting>
   <setting name="dummy" description="Dummy Link Settings" name_upper="DUMMY" >
-    <property name="name" name_upper="NAME" type="string" default="dummy" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+  </setting>
+  <setting name="ethtool" description="Ethtool Ethernet Settings" name_upper="ETHTOOL" >
   </setting>
   <setting name="generic" description="Generic Link Settings" name_upper="GENERIC" >
-    <property name="name" name_upper="NAME" type="string" default="generic" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
   </setting>
   <setting name="gsm" description="GSM-based Mobile Broadband Settings" name_upper="GSM" >
     <property name="apn" name_upper="APN" type="string" description="The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9." />
     <property name="device-id" name_upper="DEVICE_ID" type="string" description="The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device." />
     <property name="home-only" name_upper="HOME_ONLY" type="boolean" default="FALSE" description="When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." />
-    <property name="name" name_upper="NAME" type="string" default="gsm" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="network-id" name_upper="NETWORK_ID" type="string" description="The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible." />
     <property name="number" name_upper="NUMBER" type="string" description="Number to dial when establishing a PPP data session with the GSM-based mobile broadband network.  Many modems do not require PPP for connections to the mobile network and thus this property should be left blank, which allows NetworkManager to select the appropriate settings automatically." />
     <property name="password" name_upper="PASSWORD" type="string" description="The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here." />
@@ -162,7 +157,6 @@
   <setting name="infiniband" description="Infiniband Settings" name_upper="INFINIBAND" >
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames." />
-    <property name="name" name_upper="NAME" type="string" default="infiniband" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="p-key" name_upper="P_KEY" type="int32" default="-1" description="The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka &quot;the P_Key at index 0&quot;).  Otherwise it is a 16-bit unsigned integer, whose high bit is set if it is a &quot;full membership&quot; P_Key." />
     <property name="parent" name_upper="PARENT" type="string" description="The interface name of the parent device of this device. Normally NULL, but if the &quot;p_key&quot; property is set, then you must specify the base device by setting either this property or &quot;mac-address&quot;." />
     <property name="transport-mode" name_upper="TRANSPORT_MODE" type="string" description="The IP-over-InfiniBand transport mode. Either &quot;datagram&quot; or &quot;connected&quot;." />
@@ -183,8 +177,7 @@
     <property name="ignore-auto-dns" name_upper="IGNORE_AUTO_DNS" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
     <property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." />
-    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen." />
-    <property name="name" name_upper="NAME" type="string" default="ipv4" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
     <property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." />
     <property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." />
     <property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." />
@@ -207,8 +200,7 @@
     <property name="ignore-auto-routes" name_upper="IGNORE_AUTO_ROUTES" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured routes are ignored and only routes specified in the &quot;routes&quot; property, if any, are used." />
     <property name="ip6-privacy" name_upper="IP6_PRIVACY" type="NMSettingIP6ConfigPrivacy (int32)" description="Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to &quot;-1&quot; (unknown) means fallback to global configuration &quot;ipv6.ip6-privacy&quot;. If also global configuration is unspecified or set to &quot;-1&quot;, fallback to read &quot;/proc/sys/net/ipv6/conf/default/use_tempaddr&quot;. Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the &quot;addr-gen-mode&quot; property's &quot;stable-privacy&quot; setting as another way of avoiding host tracking with IPv6 addresses." />
     <property name="may-fail" name_upper="MAY_FAIL" type="boolean" default="TRUE" description="If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully." />
-    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen." />
-    <property name="name" name_upper="NAME" type="string" default="ipv6" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+    <property name="method" name_upper="METHOD" type="string" description="IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support &quot;auto&quot;, &quot;manual&quot;, and &quot;link-local&quot;. See the subclass-specific documentation for other values. In general, for the &quot;auto&quot; method, properties such as &quot;dns&quot; and &quot;routes&quot; specify information that is added on to the information returned from automatic configuration.  The &quot;ignore-auto-routes&quot; and &quot;ignore-auto-dns&quot; properties modify this behavior. For methods that imply no upstream network, such as &quot;shared&quot; or &quot;link-local&quot;, these properties must be empty. For IPv4 method &quot;shared&quot;, the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared." />
     <property name="never-default" name_upper="NEVER_DEFAULT" type="boolean" default="FALSE" description="If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager." />
     <property name="route-metric" name_upper="ROUTE_METRIC" type="int64" default="-1" description="The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric." />
     <property name="route-table" name_upper="ROUTE_TABLE" type="uint32" default="0" description="Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager." />
@@ -223,7 +215,6 @@
     <property name="local" name_upper="LOCAL" type="string" description="The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address." />
     <property name="mode" name_upper="MODE" type="uint32" default="0" description="The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2)." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments." />
-    <property name="name" name_upper="NAME" type="string" default="ip-tunnel" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="output-key" name_upper="OUTPUT_KEY" type="string" description="The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface." />
     <property name="path-mtu-discovery" name_upper="PATH_MTU_DISCOVERY" type="boolean" default="TRUE" description="Whether to enable Path MTU Discovery on this tunnel." />
@@ -237,7 +228,6 @@
     <property name="mka-cak-flags" name_upper="MKA_CAK_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;mka-cak&quot; property." />
     <property name="mka-ckn" name_upper="MKA_CKN" type="string" description="The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement." />
     <property name="mode" name_upper="MODE" type="int32" default="0" description="Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained." />
-    <property name="name" name_upper="NAME" type="string" default="macsec" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
     <property name="port" name_upper="PORT" type="int32" default="1" description="The port component of the SCI (Secure Channel Identifier), between 1 and 65534." />
     <property name="send-sci" name_upper="SEND_SCI" type="boolean" default="TRUE" description="Specifies whether the SCI (Secure Channel Identifier) is included in every packet." />
@@ -245,30 +235,28 @@
   </setting>
   <setting name="macvlan" description="MAC VLAN Settings" name_upper="MACVLAN" >
     <property name="mode" name_upper="MODE" type="uint32" default="0" description="The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device." />
-    <property name="name" name_upper="NAME" type="string" default="macvlan" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
     <property name="promiscuous" name_upper="PROMISCUOUS" type="boolean" default="TRUE" description="Whether the interface should be put in promiscuous mode." />
     <property name="tap" name_upper="TAP" type="boolean" default="FALSE" description="Whether the interface should be a MACVTAP." />
   </setting>
+  <setting name="match" description="Match settings." name_upper="MATCH" >
+    <property name="interface-name" name_upper="INTERFACE_NAME" type="array of string" default="[]" description="A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match." />
+  </setting>
   <setting name="802-11-olpc-mesh" description="OLPC Wireless Mesh Settings" name_upper="OLPC_MESH" >
     <property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Channel on which the mesh network to join is located." />
     <property name="dhcp-anycast-address" name_upper="DHCP_ANYCAST_ADDRESS" type="byte array" description="Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request." />
-    <property name="name" name_upper="NAME" type="string" default="802-11-olpc-mesh" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="ssid" name_upper="SSID" type="byte array" description="SSID of the mesh network to join." />
   </setting>
   <setting name="ovs-bridge" description="OvsBridge Link Settings" name_upper="OVS_BRIDGE" >
     <property name="fail-mode" name_upper="FAIL_MODE" type="string" description="The bridge failure mode. One of &quot;secure&quot;, &quot;standalone&quot; or empty." />
     <property name="mcast-snooping-enable" name_upper="MCAST_SNOOPING_ENABLE" type="boolean" default="FALSE" description="Enable or disable multicast snooping." />
-    <property name="name" name_upper="NAME" type="string" default="ovs-bridge" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="rstp-enable" name_upper="RSTP_ENABLE" type="boolean" default="FALSE" description="Enable or disable RSTP." />
     <property name="stp-enable" name_upper="STP_ENABLE" type="boolean" default="FALSE" description="Enable or disable STP." />
   </setting>
   <setting name="ovs-interface" description="Open vSwitch Interface Settings" name_upper="OVS_INTERFACE" >
-    <property name="name" name_upper="NAME" type="string" default="ovs-interface" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="type" name_upper="TYPE" type="string" description="The interface type. Either &quot;internal&quot;, or empty." />
   </setting>
   <setting name="ovs-patch" description="OvsPatch Link Settings" name_upper="OVS_PATCH" >
-    <property name="name" name_upper="NAME" type="string" default="ovs-patch" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="peer" name_upper="PEER" type="string" description="Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to." />
   </setting>
   <setting name="ovs-port" description="OvsPort Link Settings" name_upper="OVS_PORT" >
@@ -276,7 +264,6 @@
     <property name="bond-mode" name_upper="BOND_MODE" type="string" description="Bonding mode. One of &quot;active-backup&quot;, &quot;balance-slb&quot;, or &quot;balance-tcp&quot;." />
     <property name="bond-updelay" name_upper="BOND_UPDELAY" type="uint32" default="0" description="The time port must be active before it starts forwarding traffic." />
     <property name="lacp" name_upper="LACP" type="string" description="LACP mode. One of &quot;active&quot;, &quot;off&quot;, or &quot;passive&quot;." />
-    <property name="name" name_upper="NAME" type="string" default="ovs-port" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="tag" name_upper="TAG" type="uint32" default="0" description="The VLAN tag in the range 0-4095." />
     <property name="vlan-mode" name_upper="VLAN_MODE" type="string" description="The VLAN mode. One of &quot;access&quot;, &quot;native-tagged&quot;, &quot;native-untagged&quot;, &quot;trunk&quot; or unset." />
   </setting>
@@ -288,7 +275,6 @@
     <property name="mppe-stateful" name_upper="MPPE_STATEFUL" type="boolean" default="FALSE" description="If TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE." />
     <property name="mru" name_upper="MRU" type="uint32" default="0" description="If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, instruct pppd to send packets no larger than the specified size." />
-    <property name="name" name_upper="NAME" type="string" default="ppp" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="no-vj-comp" name_upper="NO_VJ_COMP" type="boolean" default="FALSE" description="If TRUE, Van Jacobsen TCP header compression will not be requested." />
     <property name="noauth" name_upper="NOAUTH" type="boolean" default="TRUE" description="If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE." />
     <property name="nobsdcomp" name_upper="NOBSDCOMP" type="boolean" default="FALSE" description="If TRUE, BSD compression will not be requested." />
@@ -302,7 +288,6 @@
     <property name="require-mppe-128" name_upper="REQUIRE_MPPE_128" type="boolean" default="FALSE" description="If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the &quot;require-mppe&quot; property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail." />
   </setting>
   <setting name="pppoe" description="PPP-over-Ethernet Settings" name_upper="PPPOE" >
-    <property name="name" name_upper="NAME" type="string" default="pppoe" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in &quot;interface-name&quot; of NMSettingConnection." />
     <property name="password" name_upper="PASSWORD" type="string" description="Password used to authenticate with the PPPoE service." />
     <property name="password-flags" name_upper="PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;password&quot; property." />
@@ -312,21 +297,23 @@
   <setting name="proxy" description="WWW Proxy Settings" name_upper="PROXY" >
     <property name="browser-only" name_upper="BROWSER_ONLY" type="boolean" default="FALSE" description="Whether the proxy configuration is for browser only." />
     <property name="method" name_upper="METHOD" type="int32" default="0" description="Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)" />
-    <property name="name" name_upper="NAME" type="string" default="proxy" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="pac-script" name_upper="PAC_SCRIPT" type="string" description="PAC script for the connection." />
     <property name="pac-url" name_upper="PAC_URL" type="string" description="PAC URL for obtaining PAC file." />
   </setting>
   <setting name="serial" description="Serial Link Settings" name_upper="SERIAL" >
     <property name="baud" name_upper="BAUD" type="uint32" default="57600" description="Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed." />
     <property name="bits" name_upper="BITS" type="uint32" default="8" description="Byte-width of the serial communication. The 8 in &quot;8n1&quot; for example." />
-    <property name="name" name_upper="NAME" type="string" default="serial" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parity" name_upper="PARITY" type="NMSettingSerialParity (byte)" description="Parity setting of the serial port." />
     <property name="send-delay" name_upper="SEND_DELAY" type="uint64" default="0" description="Time to delay between each byte sent to the modem, in microseconds." />
     <property name="stopbits" name_upper="STOPBITS" type="uint32" default="1" description="Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in &quot;8n1&quot; for example." />
   </setting>
-  <setting name="tc" description="Linux Traffic Contril Settings." name_upper="TC_CONFIG" >
-    <property name="name" name_upper="NAME" type="string" default="tc" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
-    <property name="qdiscs" name_upper="QDISCS" type="array of vardict" default="[]" description="Array of TC queuening disciplines." />
+  <setting name="sriov" description="SR-IOV settings." name_upper="SRIOV" >
+    <property name="autoprobe-drivers" name_upper="AUTOPROBE_DRIVERS" type="NMTernary (int32)" description="Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1)." />
+    <property name="total-vfs" name_upper="TOTAL_VFS" type="uint32" default="0" description="The total number of virtual functions to create." />
+    <property name="vfs" name_upper="VFS" type="array of vardict" default="[]" description="Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: &quot;INDEX [ATTR=VALUE[ ATTR=VALUE]...]&quot;. for example: &quot;2 mac=00:11:22:33:44:55 spoof-check=true&quot;. The &quot;vlans&quot; attribute is represented as a semicolor-separated list of VLAN descriptors, where each descriptor has the form &quot;ID[.PRIORITY[.PROTO]]&quot;. PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad." />
+  </setting>
+  <setting name="tc" description="Linux Traffic Control Settings." name_upper="TC_CONFIG" >
+    <property name="qdiscs" name_upper="QDISCS" type="array of vardict" default="[]" description="Array of TC queueing disciplines." />
     <property name="tfilters" name_upper="TFILTERS" type="array of vardict" default="[]" description="Array of TC traffic filters." />
   </setting>
   <setting name="team" description="Teaming Settings" name_upper="TEAM" >
@@ -334,7 +321,6 @@
     <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" default="[]" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details." />
     <property name="mcast-rejoin-count" name_upper="MCAST_REJOIN_COUNT" type="int32" default="0" description="Corresponds to the teamd mcast_rejoin.count." />
     <property name="mcast-rejoin-interval" name_upper="MCAST_REJOIN_INTERVAL" type="int32" default="0" description="Corresponds to the teamd mcast_rejoin.interval." />
-    <property name="name" name_upper="NAME" type="string" default="team" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="notify-peers-count" name_upper="NOTIFY_PEERS_COUNT" type="int32" default="0" description="Corresponds to the teamd notify_peers.count." />
     <property name="notify-peers-interval" name_upper="NOTIFY_PEERS_INTERVAL" type="int32" default="0" description="Corresponds to the teamd notify_peers.interval." />
     <property name="runner" name_upper="RUNNER" type="string" default="&quot;roundrobin&quot;" description="Corresponds to the teamd runner.name. Permitted values are: &quot;roundrobin&quot;, &quot;broadcast&quot;, &quot;activebackup&quot;, &quot;loadbalance&quot;, &quot;lacp&quot;, &quot;random&quot;. When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value)." />
@@ -353,7 +339,6 @@
     <property name="lacp-key" name_upper="LACP_KEY" type="int32" default="0" description="Corresponds to the teamd ports.PORTIFNAME.lacp_key." />
     <property name="lacp-prio" name_upper="LACP_PRIO" type="int32" default="255" description="Corresponds to the teamd ports.PORTIFNAME.lacp_prio." />
     <property name="link-watchers" name_upper="LINK_WATCHERS" type="array of vardict" default="[]" description="Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details." />
-    <property name="name" name_upper="NAME" type="string" default="team-port" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="prio" name_upper="PRIO" type="int32" default="0" description="Corresponds to the teamd ports.PORTIFNAME.prio." />
     <property name="queue-id" name_upper="QUEUE_ID" type="int32" default="-1" description="Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config." />
     <property name="sticky" name_upper="STICKY" type="boolean" default="FALSE" description="Corresponds to the teamd ports.PORTIFNAME.sticky." />
@@ -362,26 +347,22 @@
     <property name="group" name_upper="GROUP" type="string" description="The group ID which will own the device. If set to NULL everyone will be able to use the device." />
     <property name="mode" name_upper="MODE" type="uint32" default="1" description="The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one." />
     <property name="multi-queue" name_upper="MULTI_QUEUE" type="boolean" default="FALSE" description="If the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue." />
-    <property name="name" name_upper="NAME" type="string" default="tun" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="owner" name_upper="OWNER" type="string" description="The user ID which will own the device. If set to NULL everyone will be able to use the device." />
     <property name="pi" name_upper="PI" type="boolean" default="FALSE" description="If TRUE the interface will prepend a 4 byte header describing the physical interface to the packets." />
     <property name="vnet-hdr" name_upper="VNET_HDR" type="boolean" default="FALSE" description="If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header." />
   </setting>
   <setting name="user" description="General User Profile Settings" name_upper="USER" >
     <property name="data" name_upper="DATA" type="dict of string to string" default="{}" description="A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length." />
-    <property name="name" name_upper="NAME" type="string" default="user" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
   </setting>
   <setting name="vlan" description="VLAN Settings" name_upper="VLAN" >
     <property name="egress-priority-map" name_upper="EGRESS_PRIORITY_MAP" type="array of string" default="[]" description="For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
     <property name="flags" name_upper="FLAGS" type="NMVlanFlags (uint32)" description="One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0." />
     <property name="id" name_upper="ID" type="uint32" default="0" description="The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095." />
     <property name="ingress-priority-map" name_upper="INGRESS_PRIORITY_MAP" type="array of string" default="[]" description="For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format &quot;from:to&quot; where both &quot;from&quot; and &quot;to&quot; are unsigned integers, ie &quot;7:3&quot;." />
-    <property name="name" name_upper="NAME" type="string" default="vlan" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
   </setting>
   <setting name="vpn" description="VPN Settings" name_upper="VPN" >
     <property name="data" name_upper="DATA" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of VPN plugin specific data.  Both keys and values must be strings." />
-    <property name="name" name_upper="NAME" type="string" default="vpn" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="persistent" name_upper="PERSISTENT" type="boolean" default="FALSE" description="If the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected." />
     <property name="secrets" name_upper="SECRETS" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys.  Both keys and values must be strings." />
     <property name="service-type" name_upper="SERVICE_TYPE" type="string" description="D-Bus service name of the VPN plugin that this setting uses to connect to its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin." />
@@ -397,7 +378,6 @@
     <property name="learning" name_upper="LEARNING" type="boolean" default="TRUE" description="Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database." />
     <property name="limit" name_upper="LIMIT" type="uint32" default="0" description="Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries." />
     <property name="local" name_upper="LOCAL" type="string" description="If given, specifies the source IP address to use in outgoing packets." />
-    <property name="name" name_upper="NAME" type="string" default="vxlan" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="parent" name_upper="PARENT" type="string" description="If given, specifies the parent interface name or parent connection UUID." />
     <property name="proxy" name_upper="PROXY" type="boolean" default="FALSE" description="Specifies whether ARP proxy is turned on." />
     <property name="remote" name_upper="REMOTE" type="string" description="Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join." />
@@ -409,7 +389,6 @@
   </setting>
   <setting name="wimax" description="WiMax Settings" name_upper="WIMAX" >
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1" />
-    <property name="name" name_upper="NAME" type="string" default="wimax" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="network-name" name_upper="NETWORK_NAME" type="string" description="Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1" />
   </setting>
   <setting name="802-3-ethernet" description="Wired Ethernet Settings" name_upper="WIRED" >
@@ -420,7 +399,6 @@
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55)." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
-    <property name="name" name_upper="NAME" type="string" default="802-3-ethernet" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="port" name_upper="PORT" type="string" description="Specific port type to use if the device supports multiple attachment methods.  One of &quot;tp&quot; (Twisted Pair), &quot;aui&quot; (Attachment Unit Interface), &quot;bnc&quot; (Thin Ethernet) or &quot;mii&quot; (Media Independent Interface). If the device supports only one port type, this setting is ignored." />
     <property name="s390-nettype" name_upper="S390_NETTYPE" type="string" description="s390 network device type; one of &quot;qeth&quot;, &quot;lcs&quot;, or &quot;ctc&quot;, representing the different types of virtual network devices available on s390 systems." />
     <property name="s390-options" name_upper="S390_OPTIONS" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include &quot;portno&quot;, &quot;layer2&quot;, &quot;portname&quot;, &quot;protocol&quot;, among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
@@ -435,13 +413,12 @@
     <property name="channel" name_upper="CHANNEL" type="uint32" default="0" description="Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the &quot;band&quot; property to be set." />
     <property name="cloned-mac-address" name_upper="CLONED_MAC_ADDRESS" type="byte array" description="If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; and &quot;stable&quot; are supported. &quot;preserve&quot; means not to touch the MAC address on activation. &quot;permanent&quot; means to use the permanent hardware address of the device. &quot;random&quot; creates a random MAC address on each connect. &quot;stable&quot; creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to &quot;preserve&quot; (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as &quot;assigned-mac-address&quot; or the deprecated &quot;cloned-mac-address&quot;." />
     <property name="generate-mac-address-mask" name_upper="GENERATE_MAC_ADDRESS_MASK" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
-    <property name="hidden" name_upper="HIDDEN" type="boolean" default="FALSE" description="If TRUE, indicates this network is a non-broadcasting network that hides its SSID.  In this case various workarounds may take place, such as probe-scanning the SSID for more reliable network discovery.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. Note that marking the network as hidden may be a privacy issue for you, as the explicit probe-scans may be distinctly recognizable on the air." />
+    <property name="hidden" name_upper="HIDDEN" type="boolean" default="FALSE" description="If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air." />
     <property name="mac-address" name_upper="MAC_ADDRESS" type="byte array" description="If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" name_upper="MAC_ADDRESS_BLACKLIST" type="array of string" default="[]" description="A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg &quot;00:11:22:33:44:55&quot;)." />
     <property name="mac-address-randomization" name_upper="MAC_ADDRESS_RANDOMIZATION" type="uint32" default="0" description="One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1" />
     <property name="mode" name_upper="MODE" type="string" description="Wi-Fi network mode; one of &quot;infrastructure&quot;, &quot;adhoc&quot; or &quot;ap&quot;.  If blank, infrastructure is assumed." />
     <property name="mtu" name_upper="MTU" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
-    <property name="name" name_upper="NAME" type="string" default="802-11-wireless" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="powersave" name_upper="POWERSAVE" type="uint32" default="0" description="One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved." />
     <property name="rate" name_upper="RATE" type="uint32" default="0" description="If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate." />
     <property name="seen-bssids" name_upper="SEEN_BSSIDS" type="array of string" default="[]" description="A list of BSSIDs (each BSSID formatted as a MAC address like &quot;00:11:22:33:44:55&quot;) that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved." />
@@ -457,7 +434,6 @@
     <property name="leap-password" name_upper="LEAP_PASSWORD" type="string" description="The login password for legacy LEAP connections (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;)." />
     <property name="leap-password-flags" name_upper="LEAP_PASSWORD_FLAGS" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;leap-password&quot; property." />
     <property name="leap-username" name_upper="LEAP_USERNAME" type="string" description="The login username for legacy LEAP connections (ie, key-mgmt = &quot;ieee8021x&quot; and auth-alg = &quot;leap&quot;)." />
-    <property name="name" name_upper="NAME" type="string" default="802-11-wireless-security" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
     <property name="pairwise" name_upper="PAIRWISE" type="array of string" default="[]" description="A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of &quot;tkip&quot; or &quot;ccmp&quot;." />
     <property name="pmf" name_upper="PMF" type="int32" default="0" description="Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled." />
     <property name="proto" name_upper="PROTO" type="array of string" default="[]" description="List of strings specifying the allowed WPA protocol versions to use. Each element may be one &quot;wpa&quot; (allow WPA) or &quot;rsn&quot; (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed." />
@@ -472,4 +448,9 @@
     <property name="wep-tx-keyidx" name_upper="WEP_TX_KEYIDX" type="uint32" default="0" description="When static WEP is used (ie, key-mgmt = &quot;none&quot;) and a non-default WEP key index is used by the AP, put that WEP key index here.  Valid values are 0 (default key) through 3.  Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4." />
     <property name="wps-method" name_upper="WPS_METHOD" type="uint32" default="0" description="Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1." />
   </setting>
+  <setting name="wpan" description="IEEE 802.15.4 (WPAN) MAC Settings" name_upper="WPAN" >
+    <property name="mac-address" name_upper="MAC_ADDRESS" type="string" description="If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches." />
+    <property name="pan-id" name_upper="PAN_ID" type="uint32" default="65535" description="IEEE 802.15.4 Personal Area Network (PAN) identifier." />
+    <property name="short-address" name_upper="SHORT_ADDRESS" type="uint32" default="65535" description="Short IEEE 802.15.4 address to be used within a restricted environment." />
+  </setting>
 </nm-setting-docs>
-- 
cgit 1.3.0-6-gf8a5