From 58f8be580039b0575b197b9573a1c92745d96d30 Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Tue, 17 Jan 2017 20:25:09 +0100
Subject: New upstream version 1.5.90

---
 libnm/nm-property-docs.xml | 43 +++++++++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 12 deletions(-)

(limited to 'libnm/nm-property-docs.xml')

diff --git a/libnm/nm-property-docs.xml b/libnm/nm-property-docs.xml
index 71cbc35a..9d58df94 100644
--- a/libnm/nm-property-docs.xml
+++ b/libnm/nm-property-docs.xml
@@ -86,6 +86,7 @@
   <setting name="connection">
     <property name="autoconnect" type="boolean" default="TRUE" description="Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection." />
     <property name="autoconnect-priority" type="int32" default="0" description="The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority." />
+    <property name="autoconnect-retries" type="int32" default="-1" description="The number of times a connection should be tried when autoctivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden)." />
     <property name="autoconnect-slaves" type="NMSettingConnectionAutoconnectSlaves (int32)" description="Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0." />
     <property name="gateway-ping-timeout" type="uint32" default="0" description="If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping." />
     <property name="id" type="string" description="A human readable unique identifier for the connection, like &quot;Work Wi-Fi&quot; or &quot;T-Mobile 3G&quot;." />
@@ -98,7 +99,7 @@
     <property name="read-only" type="boolean" default="FALSE" description="FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified." />
     <property name="secondaries" type="array of string" default="[]" description="List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported." />
     <property name="slave-type" type="string" description="Setting name of the device type of this slave's master connection (eg, &quot;bond&quot;), or NULL if this connection is not a slave." />
-    <property name="stable-id" type="string" description="This token to generate stable IDs for the connection. If unset, the UUID will be used instead. The stable-id is used instead of the connection UUID for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable." />
+    <property name="stable-id" type="string" description="Token to generate stable IDs for the connection. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. Note that also the interface name of the activating connection and a per-host secret key is included into the address generation so that the same stable-id on different hosts/devices yields different addresses. If the value is unset, an ID unique for the connection is used. Specifing a stable-id allows multiple connections to generate the same addresses. Another use is to generate IDs at runtime via dynamic substitutions. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are &quot;${CONNECTION}&quot;, &quot;${BOOT}&quot;, &quot;${RANDOM}&quot;. These effectively create unique IDs per-connection, per-boot, or every time. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as &quot;$$&quot;. For example, set it to &quot;${CONNECTION}/${BOOT}&quot; to create a unique id for this connection that changes with every reboot. Note that two connections only use the same effective id if their stable-id is also identical before performing dynamic substitutions." />
     <property name="timestamp" type="uint64" default="0" description="The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved)." />
     <property name="type" type="string" description="Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, &quot;802-3-ethernet&quot; or &quot;802-11-wireless&quot; or &quot;bluetooth&quot;, etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, &quot;vpn&quot; or &quot;bridge&quot;, etc)." />
     <property name="uuid" type="string" description="A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the &quot;id&quot; property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or &quot;type&quot; property changes. The UUID must be in the format &quot;2815492f-7e56-435e-b2e9-246bd7cdc664&quot; (ie, contains only hexadecimal characters and &quot;-&quot;)." />
@@ -157,8 +158,8 @@
     <property name="dhcp-send-hostname" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
     <property name="dns" type="array of uint32" default="[]" description="Array of IP addresses of DNS servers." />
-    <property name="dns-options" type="array of string" default="[]" description="Array of DNS options. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" type="int32" default="0" description="DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from configurations with the lowest priority value will be used." />
+    <property name="dns-options" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
+    <property name="dns-priority" type="int32" default="0" description="Intra-connection DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. For that, just specify the DNS servers in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used." />
     <property name="dns-search" type="array of string" default="[]" description="Array of DNS search domains." />
     <property name="gateway" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
@@ -171,15 +172,15 @@
     <property name="routes" type="array of array of uint32" default="[]" description="Array of IP routes." />
   </setting>
   <setting name="ipv6">
-    <property name="addr-gen-mode" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: &quot;eui64&quot;, or &quot;stable-privacy&quot;. If the property is set to &quot;eui64&quot;, the addresses will be generated using the interface tokens derived from  hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of &quot;stable-privacy&quot; enables use of cryptographically secure hash of a secret host-specific key along with the connection identification and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling &quot;stable-privacy&quot;. For keyfile plugin, the absence of the setting on disk means &quot;eui64&quot; so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." />
+    <property name="addr-gen-mode" type="int32" default="1" description="Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: &quot;eui64&quot;, or &quot;stable-privacy&quot;. If the property is set to &quot;eui64&quot;, the addresses will be generated using the interface tokens derived from  hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of &quot;stable-privacy&quot; enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling &quot;stable-privacy&quot;. For keyfile plugin, the absence of the setting on disk means &quot;eui64&quot; so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by &quot;ip6-privacy&quot; property and it does not affect the temporary addresses configured with this option." />
     <property name="addresses" type="array of legacy IPv6 address struct" default="[]" description="Array of IP addresses." />
     <property name="dad-timeout" type="int32" default="-1" description="Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or 3 seconds).  A value greater than zero is a timeout in milliseconds." />
     <property name="dhcp-hostname" type="string" description="If the &quot;dhcp-send-hostname&quot; property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and &quot;dhcp-fqdn&quot; are mutually exclusive and cannot be set at the same time." />
     <property name="dhcp-send-hostname" type="boolean" default="TRUE" description="If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the &quot;dhcp-hostname&quot; property is NULL and this property is TRUE, the current persistent hostname of the computer is sent." />
     <property name="dhcp-timeout" type="int32" default="0" description="A timeout for a DHCP transaction in seconds." />
     <property name="dns" type="array of byte array" default="[]" description="Array of IP addresses of DNS servers." />
-    <property name="dns-options" type="array of string" default="[]" description="Array of DNS options. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
-    <property name="dns-priority" type="int32" default="0" description="DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from configurations with the lowest priority value will be used." />
+    <property name="dns-options" type="array of string" default="[]" description="Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties." />
+    <property name="dns-priority" type="int32" default="0" description="Intra-connection DNS priority. The relative priority to be used when determining the order of DNS servers in resolv.conf.  A lower value means that servers will be on top of the file.  Zero selects the default value, which is 50 for VPNs and 100 for other connections.  Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. For that, just specify the DNS servers in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Note that when using dns=dnsmasq the order is meaningless since dnsmasq forwards queries to all known servers at the same time. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used." />
     <property name="dns-search" type="array of string" default="[]" description="Array of DNS search domains." />
     <property name="gateway" type="string" description="The gateway associated with this configuration. This is only meaningful if &quot;addresses&quot; is also set." />
     <property name="ignore-auto-dns" type="boolean" default="FALSE" description="When &quot;method&quot; is set to &quot;auto&quot; and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the &quot;dns&quot; and &quot;dns-search&quot; properties, if any, are used." />
@@ -208,6 +209,17 @@
     <property name="tos" type="uint32" default="0" description="The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets." />
     <property name="ttl" type="uint32" default="0" description="The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value." />
   </setting>
+  <setting name="macsec">
+    <property name="encrypt" type="boolean" default="TRUE" description="Whether the transmitted traffic must be encrypted." />
+    <property name="mka-cak" type="string" description="The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement." />
+    <property name="mka-cak-flags" type="NMSettingSecretFlags (uint32)" description="Flags indicating how to handle the &quot;mka-cak&quot; property." />
+    <property name="mka-ckn" type="string" description="The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement." />
+    <property name="mode" type="int32" default="0" description="Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained." />
+    <property name="name" type="string" default="macsec" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+    <property name="parent" type="string" description="If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an &quot;802-3-ethernet&quot; setting with a &quot;mac-address&quot; property." />
+    <property name="port" type="int32" default="1" description="The port component of the SCI (Secure Channel Identifier), between 1 and 65534." />
+    <property name="validation" type="int32" default="2" description="Specifies the validation mode for incoming frames." />
+  </setting>
   <setting name="macvlan">
     <property name="mode" type="uint32" default="0" description="The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device." />
     <property name="name" type="string" default="macvlan" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
@@ -249,6 +261,13 @@
     <property name="service" type="string" description="If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required." />
     <property name="username" type="string" description="Username used to authenticate with the PPPoE service." />
   </setting>
+  <setting name="proxy">
+    <property name="browser-only" type="boolean" default="FALSE" description="Whether the proxy configuration is for browser only." />
+    <property name="method" type="int32" default="0" description="Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)" />
+    <property name="name" type="string" default="proxy" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
+    <property name="pac-script" type="string" description="PAC script for the connection." />
+    <property name="pac-url" type="string" description="PAC URL for obtaining PAC file." />
+  </setting>
   <setting name="serial">
     <property name="baud" type="uint32" default="57600" description="Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed." />
     <property name="bits" type="uint32" default="8" description="Byte-width of the serial communication. The 8 in &quot;8n1&quot; for example." />
@@ -316,9 +335,9 @@
     <property name="network-name" type="string" description="Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1" />
   </setting>
   <setting name="802-3-ethernet">
-    <property name="auto-negotiate" type="boolean" default="TRUE" description="If TRUE, allow auto-negotiation of port speed and duplex mode.  If FALSE, do not allow auto-negotiation, in which case the &quot;speed&quot; and &quot;duplex&quot; properties should be set." />
-    <property name="cloned-mac-address" type="byte array" description="If specified, request that the device use this MAC address instead of its permanent MAC address.  This is known as MAC cloning or spoofing. Beside explicitly specifing a MAC address, the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; and &quot;stable&quot; are supported. &quot;preserve&quot; means not to touch the MAC address on activation. &quot;permanent&quot; means to use the permanent hardware address of the device. &quot;random&quot; creates a random MAC address on each connect. &quot;stable&quot; creates a hashed MAC address based on connection.stable-id (or the connection's UUID) and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to &quot;permanent&quot;. On D-Bus, this field is expressed as &quot;assigned-mac-address&quot; or the deprecated &quot;cloned-mac-address&quot;." />
-    <property name="duplex" type="string" description="If specified, request that the device only use the specified duplex mode. Either &quot;half&quot; or &quot;full&quot;." />
+    <property name="auto-negotiate" type="boolean" default="FALSE" description="If TRUE, enforce auto-negotiation of port speed and duplex mode.  If FALSE, &quot;speed&quot; and &quot;duplex&quot; properties should be both set or link configuration will be skipped." />
+    <property name="cloned-mac-address" type="byte array" description="If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifing a MAC address, the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; and &quot;stable&quot; are supported. &quot;preserve&quot; means not to touch the MAC address on activation. &quot;permanent&quot; means to use the permanent hardware address of the device. &quot;random&quot; creates a random MAC address on each connect. &quot;stable&quot; creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to &quot;preserve&quot; (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as &quot;assigned-mac-address&quot; or the deprecated &quot;cloned-mac-address&quot;." />
+    <property name="duplex" type="string" description="Can be specified only when &quot;auto-negotiate&quot; is &quot;off&quot;. In that case, statically configures the device to use that specified duplex mode, either &quot;half&quot; or &quot;full&quot;. Must be set together with the &quot;speed&quot; property if specified. Before specifying a duplex mode be sure your device supports it." />
     <property name="generate-mac-address-mask" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more then one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
     <property name="mac-address" type="byte array" description="If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" type="array of string" default="[]" description="If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55)." />
@@ -328,7 +347,7 @@
     <property name="s390-nettype" type="string" description="s390 network device type; one of &quot;qeth&quot;, &quot;lcs&quot;, or &quot;ctc&quot;, representing the different types of virtual network devices available on s390 systems." />
     <property name="s390-options" type="dict of string to string" default="{}" description="Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include &quot;portno&quot;, &quot;layer2&quot;, &quot;portname&quot;, &quot;protocol&quot;, among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9])." />
     <property name="s390-subchannels" type="array of string" default="[]" description="Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the &quot;mac-address&quot; property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character." />
-    <property name="speed" type="uint32" default="0" description="If non-zero, request that the device use only the specified speed.  In Mbit/s, ie 100 == 100Mbit/s." />
+    <property name="speed" type="uint32" default="0" description="Can be set to a value grater than zero only when &quot;auto-negotiate&quot; is &quot;off&quot;. In that case, statically configures the device to use that specified speed. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the &quot;duplex&quot; property when non-zero. Before specifying a speed value be sure your device supports it." />
     <property name="wake-on-lan" type="uint32" default="1" description="The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager)." />
     <property name="wake-on-lan-password" type="string" description="If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required." />
   </setting>
@@ -336,12 +355,12 @@
     <property name="band" type="string" description="802.11 frequency band of the network.  One of &quot;a&quot; for 5GHz 802.11a or &quot;bg&quot; for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if &quot;a&quot; is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers." />
     <property name="bssid" type="byte array" description="If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future." />
     <property name="channel" type="uint32" default="0" description="Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the &quot;band&quot; property to be set." />
-    <property name="cloned-mac-address" type="byte array" description="If specified, request that the device use this MAC address instead of its permanent MAC address.  This is known as MAC cloning or spoofing. Beside explicitly specifing a MAC address, the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; and &quot;stable&quot; are supported. &quot;preserve&quot; means not to touch the MAC address on activation. &quot;permanent&quot; means to use the permanent hardware address of the device. &quot;random&quot; creates a random MAC address on each connect. &quot;stable&quot; creates a hashed MAC address based on connection.stable-id (or the connection's UUID) and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to &quot;permanent&quot;. On D-Bus, this field is expressed as &quot;assigned-mac-address&quot; or the deprecated &quot;cloned-mac-address&quot;." />
+    <property name="cloned-mac-address" type="byte array" description="If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifing a MAC address, the special values &quot;preserve&quot;, &quot;permanent&quot;, &quot;random&quot; and &quot;stable&quot; are supported. &quot;preserve&quot; means not to touch the MAC address on activation. &quot;permanent&quot; means to use the permanent hardware address of the device. &quot;random&quot; creates a random MAC address on each connect. &quot;stable&quot; creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to &quot;preserve&quot; (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as &quot;assigned-mac-address&quot; or the deprecated &quot;cloned-mac-address&quot;." />
     <property name="generate-mac-address-mask" type="string" description="With &quot;cloned-mac-address&quot; setting &quot;random&quot; or &quot;stable&quot;, by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting &quot;FE:FF:FF:00:00:00&quot; means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the &quot;random&quot; or &quot;stable&quot; algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of &quot;FE:FF:FF:00:00:00 68:F7:28:00:00:00&quot; will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of &quot;02:00:00:00:00:00 00:00:00:00:00:00&quot; will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more then one additional MAC addresses, one of them is chosen randomly. For example, &quot;02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00&quot; will create a fully scrambled MAC address, randomly locally or globally administered." />
     <property name="hidden" type="boolean" default="FALSE" description="If TRUE, indicates this network is a non-broadcasting network that hides its SSID.  In this case various workarounds may take place, such as probe-scanning the SSID for more reliable network discovery.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution." />
     <property name="mac-address" type="byte array" description="If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing)." />
     <property name="mac-address-blacklist" type="array of string" default="[]" description="A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg &quot;00:11:22:33:44:55&quot;)." />
-    <property name="mac-address-randomization" type="uint32" default="0" description="One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). Deprecated: 1" />
+    <property name="mac-address-randomization" type="uint32" default="0" description="One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1" />
     <property name="mode" type="string" description="Wi-Fi network mode; one of &quot;infrastructure&quot;, &quot;adhoc&quot; or &quot;ap&quot;.  If blank, infrastructure is assumed." />
     <property name="mtu" type="uint32" default="0" description="If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames." />
     <property name="name" type="string" default="802-11-wireless" description="The setting's name, which uniquely identifies the setting within the connection.  Each setting type has a name unique to that type, for example &quot;ppp&quot; or &quot;wireless&quot; or &quot;wired&quot;." />
-- 
cgit 1.3.0-6-gf8a5