From 58f8be580039b0575b197b9573a1c92745d96d30 Mon Sep 17 00:00:00 2001
From: Michael Biebl <biebl@debian.org>
Date: Tue, 17 Jan 2017 20:25:09 +0100
Subject: New upstream version 1.5.90

---
 introspection/org.freedesktop.NetworkManager.xml | 465 +++++++++++++++++++++++
 1 file changed, 465 insertions(+)
 create mode 100644 introspection/org.freedesktop.NetworkManager.xml

(limited to 'introspection/org.freedesktop.NetworkManager.xml')

diff --git a/introspection/org.freedesktop.NetworkManager.xml b/introspection/org.freedesktop.NetworkManager.xml
new file mode 100644
index 00000000..1c299362
--- /dev/null
+++ b/introspection/org.freedesktop.NetworkManager.xml
@@ -0,0 +1,465 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<node name="/org/freedesktop/NetworkManager">
+  <interface name="org.freedesktop.NetworkManager">
+    <annotation name="org.gtk.GDBus.C.Name" value="Manager"/>
+
+    <!--
+        Reload:
+        @flags: optional flags to specify which parts shall be reloaded.
+
+        Reload NetworkManager's configuration and perform certain updates, like flushing a cache or
+        rewriting external state to disk. This is similar to sending SIGHUP to NetworkManager but it
+        allows for more fine-grained control over what to reload (see @flags). It also allows
+        non-root access via PolicyKit and contrary to signals it is synchronous.
+
+        No flags (0x00) means to reload everything that is supported which is identical to
+        sending a SIGHUP.
+        (0x01) means to reload the NetworkManager.conf configuration from disk. Note that this
+        does not include connections, which can be reloaded via Setting's ReloadConnections.
+        (0x02) means to update DNS configuration, which usually involves writing /etc/resolv.conf
+        anew.
+        (0x04) means to restart the DNS plugin. This is for example useful when using
+        dnsmasq plugin, which uses additional configuration in /etc/NetworkManager/dnsmasq.d.
+        If you edit those files, you can restart the DNS plugin. This action shortly interrupts
+        name resolution.
+        Note that flags may affect each other. For example, restarting the DNS plugin (0x04)
+        implicitly updates DNS too (0x02). Or when reloading the configuration (0x01), changes
+        to DNS setting also cause a DNS update (0x02). However, (0x01) does not involve restarting
+        the DNS plugin (0x04) or update resolv.conf (0x02), unless the DNS related configuration
+        changes in NetworkManager.conf.
+    -->
+    <method name="Reload">
+      <arg name="flags" type="u" direction="in"/>
+    </method>
+
+    <!--
+        GetDevices:
+        @devices: List of object paths of network devices known to the system. This list does not include device placeholders (see GetAllDevices()).
+
+        Get the list of realized network devices.
+    -->
+    <method name="GetDevices">
+      <arg name="devices" type="ao" direction="out"/>
+    </method>
+
+    <!--
+        GetAllDevices:
+        @devices: List of object paths of network devices and device placeholders (eg, devices that do not yet exist but which can be automatically created by NetworkManager if one of their AvailableConnections was activated).
+
+        Get the list of all network devices.
+    -->
+    <method name="GetAllDevices">
+      <annotation name="org.freedesktop.DBus.GLib.CSymbol" value="impl_manager_get_all_devices"/>
+      <arg name="devices" type="ao" direction="out"/>
+    </method>
+
+    <!--
+        GetDeviceByIpIface:
+        @iface: Interface name of the device to find.
+        @device: Object path of the network device.
+
+        Return the object path of the network device referenced by its IP
+        interface name. Note that some devices (usually modems) only have an IP
+        interface name when they are connected.
+    -->
+    <method name="GetDeviceByIpIface">
+      <arg name="iface" type="s" direction="in"/>
+      <arg name="device" type="o" direction="out"/>
+    </method>
+
+    <!--
+        ActivateConnection:
+        @connection: The connection to activate. If "/" is given, a valid device path must be given, and NetworkManager picks the best connection to activate for the given device. VPN connections must always pass a valid connection path.
+        @device: The object path of device to be activated for physical connections. This parameter is ignored for VPN connections, because the specific_object (if provided) specifies the device to use.
+        @specific_object: The path of a connection-type-specific object this activation should use. This parameter is currently ignored for wired and mobile broadband connections, and the value of "/" should be used (ie, no specific object). For WiFi connections, pass the object path of a specific AP from the card's scan list, or "/" to pick an AP automatically. For VPN connections, pass the object path of an ActiveConnection object that should serve as the "base" connection (to which the VPN connections lifetime will be tied), or pass "/" and NM will automatically use the current default device.
+        @active_connection: The path of the active connection object representing this active connection.
+
+        Activate a connection using the supplied device.
+    -->
+    <method name="ActivateConnection">
+      <arg name="connection" type="o" direction="in"/>
+      <arg name="device" type="o" direction="in"/>
+      <arg name="specific_object" type="o" direction="in"/>
+      <arg name="active_connection" type="o" direction="out"/>
+    </method>
+
+    <!--
+        AddAndActivateConnection:
+        @connection: Connection settings and properties; if incomplete missing settings will be automatically completed using the given device and specific object.
+        @device: The object path of device to be activated using the given connection.
+        @specific_object: The path of a connection-type-specific object this activation should use. This parameter is currently ignored for wired and mobile broadband connections, and the value of "/" should be used (ie, no specific object). For WiFi connections, pass the object path of a specific AP from the card's scan list, which will be used to complete the details of the newly added connection.
+        @path: Object path of the new connection that was just added.
+        @active_connection: The path of the active connection object representing this active connection.
+
+        Adds a new connection using the given details (if any) as a template
+        (automatically filling in missing settings with the capabilities of the
+        given device and specific object), then activate the new connection.
+        Cannot be used for VPN connections at this time.
+    -->
+    <method name="AddAndActivateConnection">
+      <arg name="connection" type="a{sa{sv}}" direction="in"/>
+      <arg name="device" type="o" direction="in"/>
+      <arg name="specific_object" type="o" direction="in"/>
+      <arg name="path" type="o" direction="out"/>
+      <arg name="active_connection" type="o" direction="out"/>
+    </method>
+
+    <!--
+        DeactivateConnection:
+        @active_connection: The currently active connection to deactivate.
+
+        Deactivate an active connection.
+    -->
+    <method name="DeactivateConnection">
+      <arg name="active_connection" type="o" direction="in"/>
+    </method>
+
+    <!--
+        Sleep:
+        @sleep: Indicates whether the NetworkManager daemon should sleep or wake.
+
+        Control the NetworkManager daemon's sleep state. When asleep, all
+        interfaces that it manages are deactivated. When awake, devices are
+        available to be activated. This command should not be called directly by
+        users or clients; it is intended for system suspend/resume tracking.
+    -->
+    <method name="Sleep">
+      <arg name="sleep" type="b" direction="in"/>
+    </method>
+
+    <!--
+        Enable:
+        @enable: If FALSE, indicates that all networking should be disabled. If TRUE, indicates that NetworkManager should begin managing network devices.
+
+        Control whether overall networking is enabled or disabled. When disabled,
+        all interfaces that NM manages are deactivated. When enabled, all managed
+        interfaces are re-enabled and available to be activated. This command
+        should be used by clients that provide to users the ability to
+        enable/disable all networking.
+    -->
+    <method name="Enable">
+      <arg name="enable" type="b" direction="in"/>
+    </method>
+
+    <!--
+        GetPermissions:
+        @permissions: Dictionary of available permissions and results. Each permission is represented by a name (ie "org.freedesktop.NetworkManager.Foobar") and each result is one of the following values: "yes" (the permission is available), "auth" (the permission is available after a successful authentication), or "no" (the permission is denied). Clients may use these values in the UI to indicate the ability to perform certain operations.
+
+        Returns the permissions a caller has for various authenticated operations
+        that NetworkManager provides, like Enable/Disable networking, changing
+        WiFi, WWAN, and WiMAX state, etc.
+    -->
+    <method name="GetPermissions">
+      <arg name="permissions" type="a{ss}" direction="out"/>
+    </method>
+
+    <!--
+        CheckPermissions:
+
+        Emitted when system authorization details change, indicating that clients
+        may wish to recheck permissions with GetPermissions.
+    -->
+    <signal name="CheckPermissions"/>
+
+    <!--
+        SetLogging:
+        @level: One of [ERR, WARN, INFO, DEBUG, TRACE, OFF, KEEP]. This level is applied to the domains as specified in the domains argument. Except for the special level "KEEP", all unmentioned domains are disabled entirely. "KEEP" is special and allows not to change the current setting except for the specified domains. E.g. level=KEEP and domains=PLATFORM:DEBUG will only touch the platform domain.
+        @domains: A combination of logging domains separated by commas (','), or "NONE" to disable logging. Each domain enables logging for operations related to that domain. Available domains are: [PLATFORM, RFKILL, ETHER, WIFI, BT, MB, DHCP4, DHCP6, PPP, WIFI_SCAN, IP4, IP6, AUTOIP4, DNS, VPN, SHARING, SUPPLICANT, AGENTS, SETTINGS, SUSPEND, CORE, DEVICE, OLPC, WIMAX, INFINIBAND, FIREWALL, ADSL, BOND, VLAN, BRIDGE, DBUS_PROPS, TEAM, CONCHECK, DCB, DISPATCH, AUDIT]. In addition to these domains, the following special domains can be used: [NONE, ALL, DEFAULT, DHCP, IP]. You can also specify that some domains should log at a different level from the default by appending a colon (':') and a log level (eg, 'WIFI:DEBUG'). If an empty string is given, the log level is changed but the current set of log domains remains unchanged.
+
+        Set logging verbosity and which operations are logged.
+    -->
+    <method name="SetLogging">
+      <arg name="level" type="s" direction="in"/>
+      <arg name="domains" type="s" direction="in"/>
+    </method>
+
+    <!--
+        GetLogging:
+        @level: One of [ERR, WARN, INFO, DEBUG, TRACE].
+        @domains: For available domains see SetLogging() call.
+
+        Get current logging verbosity level and operations domains.
+    -->
+    <method name="GetLogging">
+      <arg name="level" type="s" direction="out"/>
+      <arg name="domains" type="s" direction="out"/>
+    </method>
+
+    <!--
+        CheckConnectivity:
+        @connectivity: (<link linkend="NMConnectivityState">NMConnectivityState</link>) The current connectivity state.
+
+        Re-check the network connectivity state.
+    -->
+    <method name="CheckConnectivity">
+      <arg name="connectivity" type="u" direction="out"/>
+    </method>
+
+    <!--
+        state:
+        @state: <link linkend="NMState">NMState</link>
+
+        The overall networking state as determined by the NetworkManager daemon,
+        based on the state of network devices under it's management.
+    -->
+    <method name="state">
+      <arg name="state" type="u" direction="out"/>
+    </method>
+
+    <!--
+        CheckpointCreate:
+
+        @devices: a list of device paths for which a checkpoint should be created. An empty list means all devices.
+        @rollback_timeout: the time in seconds until NetworkManager will automatically rollback to the checkpoint. Set to zero for infinite.
+        @flags: optional flags that influence the creation.
+        @checkpoint: on success, returns the path of the checkpoint.
+
+        Create a checkpoint of the current networking configuration
+        for given interfaces. If @rollback_timeout is not zero, a
+        rollback is automatically performed after the given timeout.
+    -->
+    <method name="CheckpointCreate">
+      <arg name="devices" type="ao" direction="in"/>
+      <arg name="rollback_timeout" type="u" direction="in"/>
+      <arg name="flags" type="u" direction="in"/>
+      <arg name="checkpoint" type="o" direction="out"/>
+    </method>
+
+    <!--
+        CheckpointDestroy:
+        @checkpoint: the checkpoint to be destroyed. Set to empty to cancel all pending checkpoints.
+
+        Destroy a previously created checkpoint.
+    -->
+    <method name="CheckpointDestroy">
+      <arg name="checkpoint" type="o" direction="in"/>
+    </method>
+
+    <!--
+        CheckpointRollback:
+        @checkpoint: the checkpoint to be rolled back.
+        @result: on return, a dictionary of devices and results. Devices are represented by their original D-Bus path; each result is a <link linkend="NMRollbackResult">RollbackResult</link>.
+
+        Rollback a checkpoint before the timeout is reached.
+    -->
+    <method name="CheckpointRollback">
+      <arg name="checkpoint" type="o" direction="in"/>
+      <arg name="result" type="a{su}" direction="out" />
+    </method>
+
+    <!--
+        Devices:
+
+        The list of realized network devices. Realized devices are those which
+        have backing resources (eg from the kernel or a management daemon like
+        ModemManager, teamd, etc).
+    -->
+    <property name="Devices" type="ao" access="read"/>
+
+    <!--
+        AllDevices:
+
+        The list of both realized and un-realized network devices. Un-realized
+        devices are software devices which do not yet have backing resources, but
+        for which backing resources can be created if the device is activated.
+    -->
+    <property name="AllDevices" type="ao" access="read"/>
+
+    <!--
+        NetworkingEnabled:
+
+        Indicates if overall networking is currently enabled or not. See the
+        Enable() method.
+    -->
+    <property name="NetworkingEnabled" type="b" access="read"/>
+
+    <!--
+        WirelessEnabled:
+
+        Indicates if wireless is currently enabled or not.
+    -->
+    <property name="WirelessEnabled" type="b" access="readwrite"/>
+
+    <!--
+        WirelessHardwareEnabled:
+
+        Indicates if the wireless hardware is currently enabled, i.e. the state of
+        the RF kill switch.
+    -->
+    <property name="WirelessHardwareEnabled" type="b" access="read"/>
+
+    <!--
+        WwanEnabled:
+
+        Indicates if mobile broadband devices are currently enabled or not.
+    -->
+    <property name="WwanEnabled" type="b" access="readwrite"/>
+
+    <!--
+        WwanHardwareEnabled:
+
+        Indicates if the mobile broadband hardware is currently enabled, i.e. the
+        state of the RF kill switch.
+    -->
+    <property name="WwanHardwareEnabled" type="b" access="read"/>
+
+    <!--
+        WimaxEnabled:
+
+        Indicates if WiMAX devices are currently enabled or not.
+    -->
+    <property name="WimaxEnabled" type="b" access="readwrite"/>
+
+    <!--
+        WimaxHardwareEnabled:
+
+        Indicates if the WiMAX hardware is currently enabled, i.e. the state of
+        the RF kill switch.
+    -->
+    <property name="WimaxHardwareEnabled" type="b" access="read"/>
+
+    <!--
+        ActiveConnections:
+
+        List of active connection object paths.
+    -->
+    <property name="ActiveConnections" type="ao" access="read"/>
+
+    <!--
+        PrimaryConnection:
+
+        The object path of the "primary" active connection being used to access
+        the network. In particular, if there is no VPN active, or the VPN does not
+        have the default route, then this indicates the connection that has the
+        default route. If there is a VPN active with the default route, then this
+        indicates the connection that contains the route to the VPN endpoint.
+    -->
+    <property name="PrimaryConnection" type="o" access="read"/>
+
+    <!--
+        PrimaryConnectionType:
+
+        The connection type of the "primary" active connection being used to
+        access the network. This is the same as the Type property on the object
+        indicated by PrimaryConnection.
+    -->
+    <property name="PrimaryConnectionType" type="s" access="read"/>
+
+    <!--
+        Metered:
+
+        Indicates whether the connectivity is metered. This is equivalent to the
+        metered property of the device associated with the primary connection.
+
+        Returns: <link linkend="NMMetered">NMMetered</link>
+    -->
+    <property name="Metered" type="u" access="read"/>
+
+    <!--
+        ActivatingConnection:
+
+        The object path of an active connection that is currently being activated
+        and which is expected to become the new PrimaryConnection when it finishes
+        activating.
+    -->
+    <property name="ActivatingConnection" type="o" access="read"/>
+
+    <!--
+        Startup:
+
+        Indicates whether NM is still starting up; this becomes FALSE when NM has
+        finished attempting to activate every connection that it might be able to
+        activate at startup.
+    -->
+    <property name="Startup" type="b" access="read"/>
+
+    <!--
+        Version:
+
+        NetworkManager version.
+    -->
+    <property name="Version" type="s" access="read"/>
+
+    <!--
+        Capabilities:
+
+        The current set of capabilities. See <link
+        linkend="NMCapability">NMCapability</link> for currently
+        defined capability numbers. The array is guaranteed to
+        be sorted in ascending order without duplicates.
+    -->
+    <property name="Capabilities" type="au" access="read"/>
+
+    <!--
+        State:
+
+        The overall state of the NetworkManager daemon.
+
+        Returns: <link linkend="NMState">NMState</link>
+    -->
+    <property name="State" type="u" access="read"/>
+
+    <!--
+        StateChanged:
+        @state: (<link linkend="NMState">NMState</link>) The new state of NetworkManager.
+
+        NetworkManager's state changed.
+    -->
+    <signal name="StateChanged">
+      <arg name="state" type="u"/>
+    </signal>
+
+    <!--
+        Connectivity:
+
+        The network connectivity state.
+
+        Returns: <link linkend="NMConnectivityState">NMConnectivityState</link>
+    -->
+    <property name="Connectivity" type="u" access="read"/>
+
+    <!--
+        GlobalDnsConfiguration:
+
+        Dictionary of global DNS settings where the key is one of "searches",
+        "options" and "domains". The values for the "searches" and "options" keys
+        are string arrays describing the list of search domains and resolver
+        options, respectively. The value of the "domains" key is a second-level
+        dictionary, where each key is a domain name, and each key's value is a
+        third-level dictionary with the keys "servers" and "options". "servers" is
+        a string array of DNS servers, "options" is a string array of
+        domain-specific options.
+    -->
+    <property name="GlobalDnsConfiguration" type="a{sv}" access="readwrite"/>
+
+    <!--
+        PropertiesChanged:
+        @properties: The changed properties.
+
+        DEPRECATED. Use the standard "PropertiesChanged" signal from "org.freedesktop.DBus.Properties" instead which exists since version NetworkManager 1.2.0.
+    -->
+    <signal name="PropertiesChanged">
+      <arg name="properties" type="a{sv}"/>
+    </signal>
+
+    <!--
+        DeviceAdded:
+        @device_path: The object path of the newly added device.
+
+        A device was added to the system
+    -->
+    <signal name="DeviceAdded">
+      <arg name="device_path" type="o"/>
+    </signal>
+
+    <!--
+        DeviceRemoved:
+        @device_path: The object path of the device that was just removed.
+
+        A device was removed from the system, and is no longer available.
+    -->
+    <signal name="DeviceRemoved">
+      <arg name="device_path" type="o"/>
+    </signal>
+  </interface>
+</node>
-- 
cgit 1.3.0-6-gf8a5