From 6681f77b757bbc42ce5c8868ee9142b7ebc8c059 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Tue, 13 Feb 2024 22:23:40 +0100 Subject: New upstream version 1.45.91 --- docs/api/Makefile.in | 3 + ...-org.freedesktop.NetworkManager.Device.Bond.xml | 4 +- ...rg.freedesktop.NetworkManager.Device.Bridge.xml | 4 +- ...org.freedesktop.NetworkManager.Device.Dummy.xml | 4 +- ...g.freedesktop.NetworkManager.Device.Generic.xml | 4 +- ...s-org.freedesktop.NetworkManager.Device.Hsr.xml | 15 +-- ...reedesktop.NetworkManager.Device.Infiniband.xml | 4 +- ...-org.freedesktop.NetworkManager.Device.Team.xml | 4 +- ...s-org.freedesktop.NetworkManager.Device.Tun.xml | 4 +- ...-org.freedesktop.NetworkManager.Device.Vlan.xml | 4 +- ...org.freedesktop.NetworkManager.Device.Vxlan.xml | 4 +- ...g.freedesktop.NetworkManager.Device.WifiP2P.xml | 6 +- ...edesktop.NetworkManager.Settings.Connection.xml | 52 ++++----- ...bus-org.freedesktop.NetworkManager.Settings.xml | 24 ++-- docs/api/dbus-org.freedesktop.NetworkManager.xml | 4 +- docs/api/html/NetworkManager.conf.html | 4 + ...org.freedesktop.NetworkManager.Device.Bond.html | 5 +- ...g.freedesktop.NetworkManager.Device.Bridge.html | 5 +- ...rg.freedesktop.NetworkManager.Device.Dummy.html | 5 +- ....freedesktop.NetworkManager.Device.Generic.html | 5 +- ...-org.freedesktop.NetworkManager.Device.Hsr.html | 20 ++-- ...eedesktop.NetworkManager.Device.Infiniband.html | 5 +- ...org.freedesktop.NetworkManager.Device.Team.html | 5 +- ...-org.freedesktop.NetworkManager.Device.Tun.html | 5 +- ...org.freedesktop.NetworkManager.Device.Vlan.html | 5 +- ...rg.freedesktop.NetworkManager.Device.Vxlan.html | 5 +- ...desktop.NetworkManager.Settings.Connection.html | 16 +-- ...us-org.freedesktop.NetworkManager.Settings.html | 6 +- .../html/gdbus-org.freedesktop.NetworkManager.html | 4 +- docs/api/html/index.html | 2 +- docs/api/html/ix01.html | 124 +++++++++++---------- docs/api/html/nm-dbus-types.html | 2 +- docs/api/html/nm-initrd-generator.html | 6 + docs/api/html/nm-settings-dbus.html | 25 +++++ docs/api/html/nm-settings-nmcli.html | 21 ++++ docs/api/html/settings-connection.html | 6 + docs/api/html/settings-ipv4.html | 8 ++ docs/api/html/settings-ipv6.html | 8 ++ docs/api/settings-spec.xml | 10 +- docs/api/version.xml | 2 +- docs/libnm/Makefile.in | 3 + docs/libnm/html/NMSettingConnection.html | 53 +++++++++ docs/libnm/html/NMSettingIPConfig.html | 45 ++++++++ docs/libnm/html/api-index-full.html | 24 ++++ docs/libnm/html/index.html | 2 +- docs/libnm/html/libnm-nm-version-macros.html | 2 +- docs/libnm/html/libnm.devhelp2 | 8 +- docs/libnm/html/usage.html | 2 +- docs/libnm/libnm-sections.txt | 4 + docs/libnm/version.xml | 2 +- 50 files changed, 392 insertions(+), 202 deletions(-) (limited to 'docs') diff --git a/docs/api/Makefile.in b/docs/api/Makefile.in index 6475054c..9bc408e3 100644 --- a/docs/api/Makefile.in +++ b/docs/api/Makefile.in @@ -121,6 +121,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/attributes.m4 \ $(top_srcdir)/m4/ax_lib_readline.m4 \ $(top_srcdir)/m4/ax_pthread.m4 \ + $(top_srcdir)/m4/build-to-host.m4 \ $(top_srcdir)/m4/compiler_options.m4 \ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/git-sha-record.m4 \ $(top_srcdir)/m4/gnome-code-coverage.m4 \ @@ -415,6 +416,8 @@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ +localedir_c = @localedir_c@ +localedir_c_make = @localedir_c_make@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bond.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bond.xml index 34d1badf..43ea30eb 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bond.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bond.xml @@ -28,9 +28,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bridge.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bridge.xml index 18dd8e74..9bcabc1e 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bridge.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Bridge.xml @@ -28,9 +28,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Dummy.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Dummy.xml index 05ca8ed9..ae4e4719 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Dummy.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Dummy.xml @@ -26,9 +26,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Generic.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Generic.xml index f907a844..a14a7199 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Generic.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Generic.xml @@ -27,9 +27,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Hsr.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Hsr.xml index 8376dcd6..7b2e75af 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Hsr.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Hsr.xml @@ -30,9 +30,8 @@ Port1 readable o -The device's port1 device. + -Since 1.46 The "Port2" property @@ -41,9 +40,8 @@ The device's port1 device. Port2 readable o -The device's port2 device. + -Since 1.46 The "SupervisionAddress" property @@ -52,9 +50,8 @@ The device's port2 device. SupervisionAddress readable s -The supervision MAC address. + -Since 1.46 The "MulticastSpec" property @@ -63,9 +60,8 @@ The supervision MAC address. MulticastSpec readable y -The last byte of the supervision address. + -Since 1.46 The "Prp" property @@ -74,9 +70,8 @@ The last byte of the supervision address. Prp readable b -Whether the PRP protocol is used or not. + -Since 1.46 diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Infiniband.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Infiniband.xml index ed6533ae..65fc978d 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Infiniband.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Infiniband.xml @@ -27,9 +27,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Team.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Team.xml index d63bad6a..f8d0bd08 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Team.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Team.xml @@ -29,9 +29,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Tun.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Tun.xml index 0b5f198a..9e447e6d 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Tun.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Tun.xml @@ -95,9 +95,7 @@ device multiple times, for multiple send/receive queues. HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vlan.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vlan.xml index 2752e5b6..964640e1 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vlan.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vlan.xml @@ -29,9 +29,7 @@ HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vxlan.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vxlan.xml index b4940213..9a00720c 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vxlan.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.Vxlan.xml @@ -53,9 +53,7 @@ to this host). HwAddress readable s -Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. + diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Device.WifiP2P.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Device.WifiP2P.xml index f34c309b..c0f30afd 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Device.WifiP2P.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Device.WifiP2P.xml @@ -48,9 +48,9 @@ The options argument accepts the following keys: -i timeout: -Timeout value in the range of 1-600 seconds. -The default is 30 seconds. + i timeout: + Timeout value in the range of 1-600 seconds. + The default is 30 seconds. diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Settings.Connection.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Settings.Connection.xml index 7f01357e..a302a3d0 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Settings.Connection.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Settings.Connection.xml @@ -196,36 +196,36 @@ logically or-ed together: -0x1 (to-disk): -The connection is persisted to disk. + 0x1 (to-disk): + The connection is persisted to disk. -0x2 (in-memory): -The change is only made in memory (without touching an eventual -profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory -only, if the connection is already in memory only. + 0x2 (in-memory): + The change is only made in memory (without touching an eventual + profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory + only, if the connection is already in memory only. -0x4 (in-memory-detached): -Like "in-memory", but behaves slightly different when migrating -the profile from disk to in-memory. + 0x4 (in-memory-detached): + Like "in-memory", but behaves slightly different when migrating + the profile from disk to in-memory. -0x8 (in-memory-only): -Like "in-memory", but behaves slightly different when migrating -the profile from disk to in-memory. + 0x8 (in-memory-only): + Like "in-memory", but behaves slightly different when migrating + the profile from disk to in-memory. -0x10 (volatile): + 0x10 (volatile): -0x20 (block-autoconnect): -Blocks auto-connect on the updated profile + 0x20 (block-autoconnect): + Blocks auto-connect on the updated profile -0x40 (no-reapply): -Prevents "connection.zone" and "connection.metered" properties -to take effect on currently active devices. + 0x40 (no-reapply): + Prevents "connection.zone" and "connection.metered" properties + to take effect on currently active devices. @@ -233,14 +233,14 @@ The args argument accepts the following keys: -plugin: -The settings plugin the connection will be migrated to -such as "keyfile" or "ifcfg-rh". -Since 1.38 -version-id: -If specified, the update request is rejected if the -profile's version-id does not match. This can be used to catch concurrent -modifications. Zero means no version check.Since 1.44 + plugin: + The settings plugin the connection will be migrated to + such as "keyfile" or "ifcfg-rh". + Since 1.38 + version-id: + If specified, the update request is rejected if the + profile's version-id does not match. This can be used to catch concurrent + modifications. Zero means no version check.Since 1.44 diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.Settings.xml b/docs/api/dbus-org.freedesktop.NetworkManager.Settings.xml index 74ad0259..918bbc53 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.Settings.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.Settings.xml @@ -176,18 +176,18 @@ logically or-ed together: -0x1 (to-disk): -The connection is persisted to disk. + 0x1 (to-disk): + The connection is persisted to disk. -0x2 (in-memory): -The change is only made in memory (without touching an eventual -profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory -only, if the connection is already in memory only. + 0x2 (in-memory): + The change is only made in memory (without touching an eventual + profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory + only, if the connection is already in memory only. -0x20 (block-autoconnect): -Blocks auto-connect on the new profile + 0x20 (block-autoconnect): + Blocks auto-connect on the new profile @@ -195,10 +195,10 @@ The args argument accepts the following keys: -plugin: -The settings plugin the newly added connection will -use, such as "keyfile" or "ifcfg-rh". -Since 1.38 + plugin: + The settings plugin the newly added connection will + use, such as "keyfile" or "ifcfg-rh". + Since 1.38 diff --git a/docs/api/dbus-org.freedesktop.NetworkManager.xml b/docs/api/dbus-org.freedesktop.NetworkManager.xml index 3808e98c..c4832249 100644 --- a/docs/api/dbus-org.freedesktop.NetworkManager.xml +++ b/docs/api/dbus-org.freedesktop.NetworkManager.xml @@ -309,8 +309,8 @@ Cannot be used for VPN connections at this time. This method extends AddAndActivateConnection to allow passing further parameters. At this time the following options are supported: -* persist: A string value of either "disk" (default), "memory" or "volatile". If "memory" is passed, the connection will not be saved to disk. If "volatile" is passed, the connection will not be saved to disk and will be destroyed when disconnected. -* bind-activation: Bind the activation lifetime. Set to "dbus-client" to automatically disconnect when the requesting process disappears from the bus. The default of "none" means the connection is kept activated normally. + * persist: A string value of either "disk" (default), "memory" or "volatile". If "memory" is passed, the connection will not be saved to disk. If "volatile" is passed, the connection will not be saved to disk and will be destroyed when disconnected. + * bind-activation: Bind the activation lifetime. Set to "dbus-client" to automatically disconnect when the requesting process disappears from the bus. The default of "none" means the connection is kept activated normally. diff --git a/docs/api/html/NetworkManager.conf.html b/docs/api/html/NetworkManager.conf.html index c8d8792f..67aa539e 100644 --- a/docs/api/html/NetworkManager.conf.html +++ b/docs/api/html/NetworkManager.conf.html @@ -893,6 +893,10 @@ ipv6.ip6-privacy=0 +

ipv4.dhcp-dscp

+ + +

ipv4.dhcp-iaid

If left unspecified, it defaults to "ifname".

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html index c66f8f9b..055e6313 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html @@ -55,9 +55,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html index 050a8d2d..06c60852 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html @@ -55,9 +55,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Dummy.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Dummy.html index bfa69828..681f4f9a 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Dummy.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Dummy.html @@ -53,9 +53,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Generic.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Generic.html index bc8f07b5..898e7e3d 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Generic.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Generic.html @@ -54,9 +54,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Hsr.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Hsr.html index 6475f3a1..aa461cf1 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Hsr.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Hsr.html @@ -57,9 +57,9 @@ Port1 readable o

-The device's port1 device.

-

Since 1.46

+

+

@@ -68,9 +68,9 @@ The device's port1 device. Port2 readable o

-The device's port2 device.

-

Since 1.46

+

+

@@ -79,9 +79,9 @@ The device's port2 device. SupervisionAddress readable s

-The supervision MAC address.

-

Since 1.46

+

+

@@ -90,9 +90,9 @@ The supervision MAC address. MulticastSpec readable y

-The last byte of the supervision address.

-

Since 1.46

+

+

@@ -101,9 +101,9 @@ The last byte of the supervision address. Prp readable b

-Whether the PRP protocol is used or not.

-

Since 1.46

+

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Infiniband.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Infiniband.html index 03a3be82..437ea92f 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Infiniband.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Infiniband.html @@ -54,9 +54,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html index 56feac4c..9bdd33b4 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html @@ -56,9 +56,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Tun.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Tun.html index 3ab9992c..b54c2da2 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Tun.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Tun.html @@ -122,9 +122,8 @@ device multiple times, for multiple send/receive queues. HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vlan.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vlan.html index 835faa63..7259850f 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vlan.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vlan.html @@ -56,9 +56,8 @@ HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vxlan.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vxlan.html index 7b1b46a7..127de583 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vxlan.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Vxlan.html @@ -80,9 +80,8 @@ to this host). HwAddress readable s

-Hardware address of the device. -n -DEPRECATED. Use the "HwAddress" property in "org.freedesktop.NetworkManager.Device" instead which exists since version NetworkManager 1.24.0. +

+

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.Connection.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.Connection.html index fd20e593..b35a64f3 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.Connection.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.Connection.html @@ -256,18 +256,18 @@ logically or-ed together:

0x2 (in-memory):

The change is only made in memory (without touching an eventual -profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory -only, if the connection is already in memory only.

+ profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory + only, if the connection is already in memory only.

0x4 (in-memory-detached):

Like "in-memory", but behaves slightly different when migrating -the profile from disk to in-memory.

+ the profile from disk to in-memory.

0x8 (in-memory-only):

Like "in-memory", but behaves slightly different when migrating -the profile from disk to in-memory.

+ the profile from disk to in-memory.

0x10 (volatile):

@@ -280,7 +280,7 @@ the profile from disk to in-memory.

0x40 (no-reapply):

Prevents "connection.zone" and "connection.metered" properties -to take effect on currently active devices.

+ to take effect on currently active devices.

@@ -300,11 +300,11 @@ The args argument accepts the following keys:

plugin:, version-id:

The settings plugin the connection will be migrated to -such as "keyfile" or "ifcfg-rh".

+ such as "keyfile" or "ifcfg-rh".

Since 1.38

If specified, the update request is rejected if the -profile's version-id does not match. This can be used to catch concurrent -modifications. Zero means no version check.

+ profile's version-id does not match. This can be used to catch concurrent + modifications. Zero means no version check.

Since 1.44

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html index 4facbb7f..604b149e 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html @@ -240,8 +240,8 @@ logically or-ed together:

0x2 (in-memory):

The change is only made in memory (without touching an eventual -profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory -only, if the connection is already in memory only.

+ profile on disk). If neither 0x1 nor 0x2 is set, the change is made in memory + only, if the connection is already in memory only.

0x20 (block-autoconnect):

@@ -265,7 +265,7 @@ The args argument accepts the following keys:

plugin:

The settings plugin the newly added connection will -use, such as "keyfile" or "ifcfg-rh".

+ use, such as "keyfile" or "ifcfg-rh".

Since 1.38

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.html index 57560d60..38990a4c 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.html @@ -371,8 +371,8 @@ This method extends AddAndActivateConnection to allow passing further parameters. At this time the following options are supported:

-* persist: A string value of either "disk" (default), "memory" or "volatile". If "memory" is passed, the connection will not be saved to disk. If "volatile" is passed, the connection will not be saved to disk and will be destroyed when disconnected. -* bind-activation: Bind the activation lifetime. Set to "dbus-client" to automatically disconnect when the requesting process disappears from the bus. The default of "none" means the connection is kept activated normally. + * persist: A string value of either "disk" (default), "memory" or "volatile". If "memory" is passed, the connection will not be saved to disk. If "volatile" is passed, the connection will not be saved to disk and will be destroyed when disconnected. + * bind-activation: Bind the activation lifetime. Set to "dbus-client" to automatically disconnect when the requesting process disappears from the bus. The default of "none" means the connection is kept activated normally.

diff --git a/docs/api/html/index.html b/docs/api/html/index.html index 8a02ac76..e015aaca 100644 --- a/docs/api/html/index.html +++ b/docs/api/html/index.html @@ -16,7 +16,7 @@

- for NetworkManager 1.45.90 + for NetworkManager 1.45.91 The latest version of this documentation can be found on-line at https://networkmanager.dev/docs/api/latest/. diff --git a/docs/api/html/ix01.html b/docs/api/html/ix01.html index 48f7980f..04d94335 100644 --- a/docs/api/html/ix01.html +++ b/docs/api/html/ix01.html @@ -615,11 +615,13 @@

autoconnect, connection
-
autoconnect-priority, connection +
autoconnect-ports, connection
-
autoconnect-retries, connection +
autoconnect-priority, connection
-
autoconnect-slaves, connection +
autoconnect-retries, connection +
+
autoconnect-slaves, connection
autoprobe-drivers, sriov
@@ -679,7 +681,7 @@
config, team, team-port
-
controller, connection +
controller, connection
crtscts, ppp
@@ -758,25 +760,27 @@
dhcp-client-id, ipv4
-
dhcp-duid, ipv6 +
dhcp-dscp, ipv4, ipv6 +
+
dhcp-duid, ipv6
-
dhcp-fqdn, ipv4 +
dhcp-fqdn, ipv4
-
dhcp-hostname, ipv4, ipv6 +
dhcp-hostname, ipv4, ipv6
-
dhcp-hostname-flags, ipv4, ipv6 +
dhcp-hostname-flags, ipv4, ipv6
-
dhcp-iaid, ipv4, ipv6 +
dhcp-iaid, ipv4, ipv6
-
dhcp-pd-hint, ipv6 +
dhcp-pd-hint, ipv6
-
dhcp-reject-servers, ipv4, ipv6 +
dhcp-reject-servers, ipv4, ipv6
-
dhcp-send-hostname, ipv4, ipv6 +
dhcp-send-hostname, ipv4, ipv6
-
dhcp-timeout, ipv4, ipv6 +
dhcp-timeout, ipv4, ipv6
-
dhcp-vendor-class-identifier, ipv4 +
dhcp-vendor-class-identifier, ipv4
org.freedesktop.NetworkManager.DHCP4Config, org.freedesktop.NetworkManager.DHCP4Config
@@ -786,17 +790,17 @@
org.freedesktop.NetworkManager.DHCP6Config:Options, The "Options" property
-
dns, ipv4, ipv6 +
dns, ipv4, ipv6
-
dns-data, ipv4, ipv6 +
dns-data, ipv4, ipv6
-
dns-options, ipv4, ipv6 +
dns-options, ipv4, ipv6
-
dns-over-tls, connection +
dns-over-tls, connection
-
dns-priority, ipv4, ipv6 +
dns-priority, ipv4, ipv6
-
dns-search, ipv4, ipv6 +
dns-search, ipv4, ipv6
domain-match, 802-1x
@@ -847,9 +851,9 @@

G

-
gateway, ipv4, ipv6 +
gateway, ipv4, ipv6
-
gateway-ping-timeout, connection +
gateway-ping-timeout, connection
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless
@@ -883,13 +887,13 @@

I

-
id, connection, vlan, vxlan +
id, connection, vlan, vxlan
identity, 802-1x
-
ignore-auto-dns, ipv4, ipv6 +
ignore-auto-dns, ipv4, ipv6
-
ignore-auto-routes, ipv4, ipv6 +
ignore-auto-routes, ipv4, ipv6
ingress-priority-map, vlan
@@ -899,13 +903,13 @@
input-key, ip-tunnel
-
interface-name, connection, bond, bridge, match, team, vlan +
interface-name, connection, bond, bridge, match, team, vlan
ip4-auto-default-route, wireguard
ip6-auto-default-route, wireguard
-
ip6-privacy, ipv6 +
ip6-privacy, ipv6
@@ -945,15 +949,15 @@
limit, vxlan
-
link-local, ipv4 +
link-local, ipv4
link-watchers, team, team-port
listen-port, wireguard
-
lldp, connection +
lldp, connection
-
llmnr, connection +
llmnr, connection
local, ip-tunnel, vxlan
@@ -1068,11 +1072,11 @@
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property
-
master, connection +
master, connection
max-age, bridge
-
may-fail, ipv4, ipv6 +
may-fail, ipv4, ipv6
mcast-rejoin-count, team
@@ -1080,11 +1084,11 @@
mcast-snooping-enable, ovs-bridge
-
mdns, connection +
mdns, connection
-
metered, connection +
metered, connection
-
method, ipv4, ipv6, proxy +
method, ipv4, ipv6, proxy
mka-cak, macsec
@@ -1096,15 +1100,15 @@
mppe-stateful, ppp
-
mptcp-flags, connection +
mptcp-flags, connection
mru, ppp
mtu, cdma, gsm, infiniband, ipv6, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless, loopback
-
mud-url, connection +
mud-url, connection
-
multi-connect, connection +
multi-connect, connection
multi-queue, tun
@@ -1151,7 +1155,7 @@
network-name, wimax
-
never-default, ipv4, ipv6 +
never-default, ipv4, ipv6
NM80211ApFlags, enum NM80211ApFlags
@@ -1307,7 +1311,7 @@
peers, wireguard
-
permissions, connection +
permissions, connection
persistent, vpn
@@ -1361,7 +1365,7 @@
port, macsec, 802-3-ethernet
-
port-type, connection +
port-type, connection
port1, hsr
@@ -1437,11 +1441,11 @@

R

-
ra-timeout, ipv6 +
ra-timeout, ipv6
rate, 802-11-wireless
-
read-only, connection +
read-only, connection
refuse-chap, ppp
@@ -1455,23 +1459,23 @@
remote, ip-tunnel, vxlan
-
replace-local-rule, ipv4, ipv6 +
replace-local-rule, ipv4, ipv6
require-mppe, ppp
require-mppe-128, ppp
-
required-timeout, ipv4, ipv6 +
required-timeout, ipv4, ipv6
-
route-data, ipv4, ipv6 +
route-data, ipv4, ipv6
-
route-metric, ipv4, ipv6 +
route-metric, ipv4, ipv6
-
route-table, ipv4, ipv6 +
route-table, ipv4, ipv6
-
routes, ipv4, ipv6 +
routes, ipv4, ipv6
-
routing-rules, ipv4, ipv6 +
routing-rules, ipv4, ipv6
rsc, vxlan
@@ -1508,7 +1512,7 @@
s390-subchannels, 802-3-ethernet
-
secondaries, connection +
secondaries, connection
secrets, vpn
@@ -1530,7 +1534,7 @@
sim-operator-id, gsm
-
slave-type, connection +
slave-type, connection
source-port-max, vxlan
@@ -1540,7 +1544,7 @@
ssid, 802-11-olpc-mesh, 802-11-wireless
-
stable-id, connection +
stable-id, connection
sticky, team-port
@@ -1569,9 +1573,9 @@
timeout, vpn
-
timestamp, connection +
timestamp, connection
-
token, ipv6 +
token, ipv6
tos, ip-tunnel, vxlan
@@ -1587,7 +1591,7 @@
tx-queue-length, link
-
type, connection, bluetooth, ovs-interface +
type, connection, bluetooth, ovs-interface
@@ -1598,7 +1602,7 @@
username, adsl, cdma, gsm, pppoe
-
uuid, connection +
uuid, connection
@@ -1676,9 +1680,9 @@

W

-
wait-activation-delay, connection +
wait-activation-delay, connection
-
wait-device-timeout, connection +
wait-device-timeout, connection
wake-on-lan, 802-3-ethernet
@@ -1730,7 +1734,7 @@

Z

-
zone, connection +
zone, connection
diff --git a/docs/api/html/nm-dbus-types.html b/docs/api/html/nm-dbus-types.html index c494bce2..c59dfbb2 100644 --- a/docs/api/html/nm-dbus-types.html +++ b/docs/api/html/nm-dbus-types.html @@ -3136,7 +3136,7 @@

enum NMMetered

-

The NMMetered enum has two different purposes: one is to configure "connection.metered" setting of a connection profile in NMSettingConnection, and the other is to express the actual metered state of the NMDevice at a given moment.

+

The NMMetered enum has two different purposes: one is to configure "connection.metered" setting of a connection profile in NMSettingConnection, and the other is to express the actual metered state of the NMDevice at a given moment.

For the connection profile only NM_METERED_UNKNOWN, NM_METERED_NO and NM_METERED_YES are allowed.

The device's metered state at runtime is determined by the profile which is currently active. If the profile explicitly specifies NM_METERED_NO or NM_METERED_YES, then the device's metered state is as such. If the connection profile leaves it undecided at NM_METERED_UNKNOWN (the default), then NetworkManager tries to guess the metered state, for example based on the device type or on DHCP options (like Android devices exposing a "ANDROID_METERED" DHCP vendor option). This then leads to either NM_METERED_GUESS_NO or NM_METERED_GUESS_YES.

Most applications probably should treat the runtime state NM_METERED_GUESS_YES like NM_METERED_YES, and all other states as not metered.

diff --git a/docs/api/html/nm-initrd-generator.html b/docs/api/html/nm-initrd-generator.html index eeba0c35..9c918049 100644 --- a/docs/api/html/nm-initrd-generator.html +++ b/docs/api/html/nm-initrd-generator.html @@ -111,6 +111,7 @@ rd.net.timeout.dhcp rd.net.dhcp.retry rd.net.dhcp.vendor-class +rd.net.dhcp.dscp rd.net.timeout.carrier rd.znet rd.znet_ifname @@ -161,6 +162,11 @@ boolean values (true and false / on or off / 0 or 1), and SPEED accepts positive integer values.

+

  • NetworkManager supports the + rd.net.dhcp.dscp={CS0|CS4|CS6} + kernel command line option to set a specific DSCP (TOS) value + in the IP header of DHCP messages. +

    • diff --git a/docs/api/html/nm-settings-dbus.html b/docs/api/html/nm-settings-dbus.html index 145b2ad0..9f5c9842 100644 --- a/docs/api/html/nm-settings-dbus.html +++ b/docs/api/html/nm-settings-dbus.html @@ -136,6 +136,13 @@ Depending on "connection.multi-connect", a profile can (auto)connect only once a +autoconnect-ports +NMTernary (int32) +  +Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for controller connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave port connections untouched, 1: activate all the port connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-ports is read to determine the real value. If it is default as well, this fallbacks to 0. + + + autoconnect-priority int32 0 @@ -1740,6 +1747,15 @@ If unset, a globally configured default from NetworkManager.conf is used. If sti +dhcp-dscp +string +  +Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6". + +The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin. + + + dhcp-fqdn string   @@ -2073,6 +2089,15 @@ A zero value means that no duplicate address detection is performed, -1 means th +dhcp-dscp +string +  +Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6". + +The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin. + + + dhcp-duid string   diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html index 4c1c8914..84406d4a 100644 --- a/docs/api/html/nm-settings-nmcli.html +++ b/docs/api/html/nm-settings-nmcli.html @@ -106,6 +106,16 @@ +

    connection.autoconnect-ports

    + +

    Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for controller connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave port connections untouched, 1: activate all the port connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-ports is read to determine the real value. If it is default as well, this fallbacks to 0.

    +

    + Format: choice (NMTernary)

    +

    + Valid values: default (-1), false (0), true (1)

    + + +

    connection.autoconnect-priority

    The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen.

    @@ -2782,6 +2792,17 @@ +

    ipv4.dhcp-dscp

    + +

    Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6".

    +

    The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin.

    +

    + Format: string

    +

    + Valid values: CS0, CS4, CS6

    + + +

    ipv4.dhcp-fqdn

    If the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.

    diff --git a/docs/api/html/settings-connection.html b/docs/api/html/settings-connection.html index d451fb79..f450a596 100644 --- a/docs/api/html/settings-connection.html +++ b/docs/api/html/settings-connection.html @@ -76,6 +76,12 @@ If multiple profiles are ready to autoconnect on the same device, the one with t Depending on "connection.multi-connect", a profile can (auto)connect only once at a time or multiple times. +
    autoconnect-ports
    +
    NMTernary (int32)
    +
    
+Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for controller connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave port connections untouched, 1: activate all the port connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-ports is read to determine the real value. If it is default as well, this fallbacks to 0.
+
+
 
    autoconnect-priority
    
 
    int32
    
 
    0
    
diff --git a/docs/api/html/settings-ipv4.html b/docs/api/html/settings-ipv4.html
index 74379ebf..587db9c2 100644
--- a/docs/api/html/settings-ipv4.html
+++ b/docs/api/html/settings-ipv4.html
@@ -101,6 +101,14 @@ The special value "none" prevents any client identifier from being sent. Note th
 If unset, a globally configured default from NetworkManager.conf is used. If still unset, the default depends on the DHCP plugin. The internal dhcp client will default to "mac" and the dhclient plugin will try to use one from its config file if present, or won't sent any client-id otherwise.
 
 
+
    dhcp-dscp
    
+
    string
    
+
    
+Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6".
+
+The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin.
+
+
 
    dhcp-fqdn
    
 
    string
    
 
    
diff --git a/docs/api/html/settings-ipv6.html b/docs/api/html/settings-ipv6.html
index 70d0f5ed..54b78c27 100644
--- a/docs/api/html/settings-ipv6.html
+++ b/docs/api/html/settings-ipv6.html
@@ -101,6 +101,14 @@ For other connection types, adding such an automatic route is currently not supp
 A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.
 
 
+
    dhcp-dscp
    
+
    string
    
+
    
+Specifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6".
+
+The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin.
+
+
 
    dhcp-duid
    
 
    string
    
 
    
diff --git a/docs/api/settings-spec.xml b/docs/api/settings-spec.xml
index 111f90ae..bdff11c1 100644
--- a/docs/api/settings-spec.xml
+++ b/docs/api/settings-spec.xml
@@ -12,7 +12,7 @@ Note that autoconnect is not implemented for VPN profiles. See "secondaries" as
 
 If multiple profiles are ready to autoconnect on the same device, the one with the better "connection.autoconnect-priority" is chosen. If the priorities are equal, then the most recently connected profile is activated. If the profiles were not connected earlier or their "connection.timestamp" is identical, the choice is undefined.
 
-Depending on "connection.multi-connect", a profile can (auto)connect only once at a time or multiple times.autoconnect-priorityautoconnect-priorityint320The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen.autoconnect-retriesautoconnect-retriesint32-1The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again.autoconnect-slavesautoconnect-slavesNMSettingConnectionAutoconnectSlaves (int32)Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.controllercontrollerstringInterface name of the controller device or UUID of the controller connection.dns-over-tlsdns-over-tlsint32-1Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic.
+Depending on "connection.multi-connect", a profile can (auto)connect only once at a time or multiple times.autoconnect-portsautoconnect-portsNMTernary (int32)Whether or not ports of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for controller connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave port connections untouched, 1: activate all the port connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-ports is read to determine the real value. If it is default as well, this fallbacks to 0.autoconnect-priorityautoconnect-priorityint320The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen.autoconnect-retriesautoconnect-retriesint32-1The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again.autoconnect-slavesautoconnect-slavesNMSettingConnectionAutoconnectSlaves (int32)Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.controllercontrollerstringInterface name of the controller device or UUID of the controller connection.dns-over-tlsdns-over-tlsint32-1Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic.
 
 The permitted values are: "yes" (2) use DNSOverTls and disabled fallback, "opportunistic" (1) use DNSOverTls but allow fallback to unencrypted resolution, "no" (0) don't ever use DNSOverTls. If unspecified "default" depends on the plugin used. Systemd-resolved uses global setting.
 
@@ -171,7 +171,9 @@ The special value "stable" is supported to generate a type 0 client identifier b
 
 The special value "none" prevents any client identifier from being sent. Note that this is normally not recommended.
 
-If unset, a globally configured default from NetworkManager.conf is used. If still unset, the default depends on the DHCP plugin. The internal dhcp client will default to "mac" and the dhclient plugin will try to use one from its config file if present, or won't sent any client-id otherwise.dhcp-fqdndhcp-fqdnstringIf the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.dhcp-hostnamedhcp-hostnamestringIf the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.dhcp-hostname-flagsdhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN.
+If unset, a globally configured default from NetworkManager.conf is used. If still unset, the default depends on the DHCP plugin. The internal dhcp client will default to "mac" and the dhclient plugin will try to use one from its config file if present, or won't sent any client-id otherwise.dhcp-dscpdhcp-dscpstringSpecifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6".
+
+The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin.dhcp-fqdndhcp-fqdnstringIf the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.dhcp-hostnamedhcp-hostnamestringIf the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.dhcp-hostname-flagsdhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN.
 
 Currently, this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are 0x1 (fqdn-serv-update), 0x2 (fqdn-encoded) and 0x4 (fqdn-no-update).  When no FQDN flag is set and 0x8 (fqdn-clear-flags) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and 0x8 (fqdn-clear-flags) is not set, the standard FQDN flags are set in the request: 0x1 (fqdn-serv-update), 0x2 (fqdn-encoded) for IPv4 and 0x1 (fqdn-serv-update) for IPv6.
 
@@ -261,7 +263,9 @@ Array of IPv6 address structures.  Each IPv6 address structure is composed of an
 
 For other connection types, adding such an automatic route is currently not supported and setting this to TRUE has no effect.dad-timeoutdad-timeoutint32-1Maximum timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail. The property is currently implemented only for IPv4.
 
-A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.dhcp-duiddhcp-duidstringA string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option.
+A zero value means that no duplicate address detection is performed, -1 means the default value (either the value configured globally in NetworkManger.conf or 200ms).  A value greater than zero is a timeout in milliseconds.  Note that the time intervals are subject to randomization as per RFC 5227 and so the actual duration can be between half and the full time specified in this property.dhcp-dscpdhcp-dscpstringSpecifies the value for the DSCP field (traffic class) of the IP header. When empty, the global default value is used; if no global default is specified, it is assumed to be "CS0". Allowed values are: "CS0", "CS4" and "CS6".
+
+The property is currently valid only for IPv4, and it is supported only by the "internal" DHCP plugin.dhcp-duiddhcp-duidstringA string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option.
 
 The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id.
 
diff --git a/docs/api/version.xml b/docs/api/version.xml
index 8ce2f7ea..24a58e09 100644
--- a/docs/api/version.xml
+++ b/docs/api/version.xml
@@ -1 +1 @@
-1.45.90
+1.45.91
diff --git a/docs/libnm/Makefile.in b/docs/libnm/Makefile.in
index 218d8393..50e41442 100644
--- a/docs/libnm/Makefile.in
+++ b/docs/libnm/Makefile.in
@@ -118,6 +118,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attributes.m4 \
 	$(top_srcdir)/m4/ax_lib_readline.m4 \
 	$(top_srcdir)/m4/ax_pthread.m4 \
+	$(top_srcdir)/m4/build-to-host.m4 \
 	$(top_srcdir)/m4/compiler_options.m4 \
 	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/git-sha-record.m4 \
 	$(top_srcdir)/m4/gnome-code-coverage.m4 \
@@ -412,6 +413,8 @@ install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
+localedir_c = @localedir_c@
+localedir_c_make = @localedir_c_make@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
diff --git a/docs/libnm/html/NMSettingConnection.html b/docs/libnm/html/NMSettingConnection.html
index 03ea59e7..05979d17 100644
--- a/docs/libnm/html/NMSettingConnection.html
+++ b/docs/libnm/html/NMSettingConnection.html
@@ -232,6 +232,14 @@
 
 
 
+NMTernary
+
+
+nm_setting_connection_get_autoconnect_ports ()
+
+
+
+
 guint32
 
 
@@ -457,6 +465,10 @@
 
 
 #define
+NM_SETTING_CONNECTION_AUTOCONNECT_PORTS
+
+
+#define
 NM_SETTING_CONNECTION_SECONDARIES
 
 
@@ -1301,6 +1313,11 @@ nm_setting_connection_get_port_type (NMSettingConnectionAutoconnectSlaves
 nm_setting_connection_get_autoconnect_slaves
                                (NMSettingConnection *setting);
+
    
+
    nm_setting_connection_get_autoconnect_slaves has been deprecated since version 1.46. and should not be used in newly-written code.
    
+
    Use nm_setting_connection_get_autoconnect_ports() instead, this
+is just an alias.
    
+
    
 
    Returns the “autoconnect-slaves” property of the connection.
    
 
    
 
    Parameters
    
@@ -1326,6 +1343,35 @@ with the connection.
    
 
    
 
    
 
    
+
    nm_setting_connection_get_autoconnect_ports ()
    
+
    NMTernary
+nm_setting_connection_get_autoconnect_ports
+                               (NMSettingConnection *setting);
    
+
    Returns the “autoconnect-ports” property of the connection.
    
+
    
+
    Parameters
    
+
    
+++++
+
+
+
+
+
+
    




    setting
    the NMSettingConnection
    		 
    
+
    
+
    
+
    Returns
    
+
     whether ports of the connection should be activated together
+with the connection.
    
+
    
+
    Since: 1.46
    
+
    
+
    
+
    
 
    nm_setting_connection_get_num_secondaries ()
    
 
    guint32
 nm_setting_connection_get_num_secondaries
@@ -1922,6 +1968,12 @@ property.
    
 
    
 
    
 
    
+
    NM_SETTING_CONNECTION_AUTOCONNECT_PORTS
    
+
    #define NM_SETTING_CONNECTION_AUTOCONNECT_PORTS     "autoconnect-ports"
+
    
+
    
+
    
+
    
 
    NM_SETTING_CONNECTION_SECONDARIES
    
 
    #define NM_SETTING_CONNECTION_SECONDARIES           "secondaries"
 
    
@@ -1995,6 +2047,7 @@ property.
    
 
    
 
    
 
    enum NMSettingConnectionAutoconnectSlaves
    
+
    NMSettingConnectionAutoconnectSlaves has been deprecated since version 1.46 and should not be used in newly-written code.
    
 
    NMSettingConnectionAutoconnectSlaves values indicate whether slave connections
 should be activated when master is activated.
    
 
    
diff --git a/docs/libnm/html/NMSettingIPConfig.html b/docs/libnm/html/NMSettingIPConfig.html
index 332cf285..b9eb2cb7 100644
--- a/docs/libnm/html/NMSettingIPConfig.html
+++ b/docs/libnm/html/NMSettingIPConfig.html
@@ -1092,6 +1092,13 @@ addressing, routing, and name service properties
    
 
 
 
+const char *
+
+
+nm_setting_ip_config_get_dhcp_dscp ()
+
+
+
 
 gboolean
 
@@ -1370,6 +1377,10 @@ addressing, routing, and name service properties
    
 
 
 #define
+NM_SETTING_IP_CONFIG_DHCP_DSCP
+
+
+#define
 NM_SETTING_IP_CONFIG_NEVER_DEFAULT
 
 
@@ -5780,6 +5791,34 @@ update DNS information for this machine.
    
 
    
 
    
 
    
+
    nm_setting_ip_config_get_dhcp_dscp ()
    
+
    const char *
+nm_setting_ip_config_get_dhcp_dscp (NMSettingIPConfig *setting);
    
+
    Returns the value contained in the “dhcp-dscp”
+property.
    
+
    
+
    Parameters
    
+
    
+++++
+
+
+
+
+
+
    




    setting
    the NMSettingIPConfig
    		 
    
+
    
+
    
+
    Returns
    
+
     the value for the DSCP field for DHCP
    
+
    
+
    Since: 1.46
    
+
    
+
    
+
    
 
    nm_setting_ip_config_get_never_default ()
    
 
    gboolean
 nm_setting_ip_config_get_never_default
@@ -6482,6 +6521,12 @@ rule verfies or fail.
    
 
    
 
    
 
    
+
    NM_SETTING_IP_CONFIG_DHCP_DSCP
    
+
    #define NM_SETTING_IP_CONFIG_DHCP_DSCP           "dhcp-dscp"
+
    
+
    
+
    
+
    
 
    NM_SETTING_IP_CONFIG_NEVER_DEFAULT
    
 
    #define NM_SETTING_IP_CONFIG_NEVER_DEFAULT       "never-default"
 
    
diff --git a/docs/libnm/html/api-index-full.html b/docs/libnm/html/api-index-full.html
index bec94dd6..19fac919 100644
--- a/docs/libnm/html/api-index-full.html
+++ b/docs/libnm/html/api-index-full.html
@@ -6520,6 +6520,10 @@ NMSettingConnection:autoconnect, object property in NMSettingOvs
 
 
    
 
    
+NMSettingConnection:autoconnect-ports, object property in NMSettingOvs
+
    
+
    
+
    
 NMSettingConnection:autoconnect-priority, object property in NMSettingOvs
 
    
 
    
@@ -6948,6 +6952,10 @@ NMSettingIPConfig:dad-timeout, object property in NMSettingOvs
 
 
    
 
    
+NMSettingIPConfig:dhcp-dscp, object property in NMSettingOvs
+
    
+
    
+
    
 NMSettingIPConfig:dhcp-hostname, object property in NMSettingOvs
 
    
 
    
@@ -9440,6 +9448,10 @@ NMSettingWpan:short-address, object property in NMSettingOvs
 
 
    
 
    
+NM_SETTING_CONNECTION_AUTOCONNECT_PORTS, macro in NMSettingConnection
+
    
+
    
+
    
 NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY, macro in NMSettingConnection
 
    
 
    
@@ -9484,6 +9496,10 @@ NMSettingWpan:short-address, object property in NMSettingOvs
 
 
    
 
    
+nm_setting_connection_get_autoconnect_ports, function in NMSettingConnection
+
    
+
    
+
    
 nm_setting_connection_get_autoconnect_priority, function in NMSettingConnection
 
    
 
    
@@ -10520,6 +10536,10 @@ NMSettingWpan:short-address, object property in NMSettingOvs
 
 
    
 
    
+NM_SETTING_IP_CONFIG_DHCP_DSCP, macro in NMSettingIPConfig
+
    
+
    
+
    
 NM_SETTING_IP_CONFIG_DHCP_HOSTNAME, macro in NMSettingIPConfig
 
    
 
    
@@ -10576,6 +10596,10 @@ NMSettingWpan:short-address, object property in NMSettingOvs
 
 
    
 
    
+nm_setting_ip_config_get_dhcp_dscp, function in NMSettingIPConfig
+
    
+
    
+
    
 nm_setting_ip_config_get_dhcp_hostname, function in NMSettingIPConfig
 
    
 
    
diff --git a/docs/libnm/html/index.html b/docs/libnm/html/index.html
index 41acbafb..5cbf323e 100644
--- a/docs/libnm/html/index.html
+++ b/docs/libnm/html/index.html
@@ -15,7 +15,7 @@
 
    
 
    
 
    
-      for libnm 1.45.90
+      for libnm 1.45.91
 
       The latest version of this documentation can be found on-line at
       https://networkmanager.dev/docs/libnm/latest/.
diff --git a/docs/libnm/html/libnm-nm-version-macros.html b/docs/libnm/html/libnm-nm-version-macros.html
index 2055eb48..e0b0311e 100644
--- a/docs/libnm/html/libnm-nm-version-macros.html
+++ b/docs/libnm/html/libnm-nm-version-macros.html
@@ -265,7 +265,7 @@ is compiled against.
    
 
    
 
    
 
    NM_MICRO_VERSION
    
-
    #define NM_MICRO_VERSION (90)
+
    #define NM_MICRO_VERSION (91)
 
    
 
    Evaluates to the micro version number of NetworkManager which this source
 compiled against.
    
diff --git a/docs/libnm/html/libnm.devhelp2 b/docs/libnm/html/libnm.devhelp2
index 05f39c05..4f12cb2b 100644
--- a/docs/libnm/html/libnm.devhelp2
+++ b/docs/libnm/html/libnm.devhelp2
@@ -757,7 +757,8 @@
     
     
     
-    
+    
+    
     
     
     
@@ -796,6 +797,7 @@
     
     
     
+    
     
     
     
@@ -808,7 +810,7 @@
     
     
     
-    
+    
     
     
     
@@ -1401,6 +1403,7 @@
     
     
     
+    
     
     
     
@@ -1455,6 +1458,7 @@
     
     
     
+    
     
     
     
diff --git a/docs/libnm/html/usage.html b/docs/libnm/html/usage.html
index 52d131d3..56b9df61 100644
--- a/docs/libnm/html/usage.html
+++ b/docs/libnm/html/usage.html
@@ -96,7 +96,7 @@
         
    
 
    $ cc $(pkg-config --libs --cflags libnm) -o hello-nm hello-nm.c
   $ ./hello-nm
-  NetworkManager version: 1.45.90
+  NetworkManager version: 1.45.91
 
   $ 
    
 
    
diff --git a/docs/libnm/libnm-sections.txt b/docs/libnm/libnm-sections.txt
index b54bc9c3..492f35f6 100644
--- a/docs/libnm/libnm-sections.txt
+++ b/docs/libnm/libnm-sections.txt
@@ -2419,6 +2419,7 @@ NM_SETTING_CONNECTION_CONTROLLER
 NM_SETTING_CONNECTION_SLAVE_TYPE
 NM_SETTING_CONNECTION_PORT_TYPE
 NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES
+NM_SETTING_CONNECTION_AUTOCONNECT_PORTS
 NM_SETTING_CONNECTION_SECONDARIES
 NM_SETTING_CONNECTION_GATEWAY_PING_TIMEOUT
 NM_SETTING_CONNECTION_METERED
@@ -2461,6 +2462,7 @@ nm_setting_connection_is_slave_type
 nm_setting_connection_get_slave_type
 nm_setting_connection_get_port_type
 nm_setting_connection_get_autoconnect_slaves
+nm_setting_connection_get_autoconnect_ports
 nm_setting_connection_get_num_secondaries
 nm_setting_connection_get_secondary
 nm_setting_connection_add_secondary
@@ -2855,6 +2857,7 @@ NM_SETTING_IP_CONFIG_IGNORE_AUTO_DNS
 NM_SETTING_IP_CONFIG_DHCP_HOSTNAME
 NM_SETTING_IP_CONFIG_DHCP_SEND_HOSTNAME
 NM_SETTING_IP_CONFIG_DHCP_HOSTNAME_FLAGS
+NM_SETTING_IP_CONFIG_DHCP_DSCP
 NM_SETTING_IP_CONFIG_NEVER_DEFAULT
 NM_SETTING_IP_CONFIG_MAY_FAIL
 NM_SETTING_IP_CONFIG_DAD_TIMEOUT
@@ -2931,6 +2934,7 @@ nm_setting_ip_config_get_ignore_auto_routes
 nm_setting_ip_config_get_ignore_auto_dns
 nm_setting_ip_config_get_dhcp_hostname
 nm_setting_ip_config_get_dhcp_send_hostname
+nm_setting_ip_config_get_dhcp_dscp
 nm_setting_ip_config_get_never_default
 nm_setting_ip_config_get_may_fail
 nm_setting_ip_config_get_dad_timeout
diff --git a/docs/libnm/version.xml b/docs/libnm/version.xml
index 8ce2f7ea..24a58e09 100644
--- a/docs/libnm/version.xml
+++ b/docs/libnm/version.xml
@@ -1 +1 @@
-1.45.90
+1.45.91
-- 
cgit 1.3.0-6-gf8a5