From 1e5977b62f896e844b548c3007ace9e1dfa7f9ed Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Sat, 11 Apr 2020 21:28:04 +0200 Subject: New upstream version 1.23.90 --- docs/libnm/html/NMSettingWirelessSecurity.html | 55 ++++++++++++++++++-------- 1 file changed, 38 insertions(+), 17 deletions(-) (limited to 'docs/libnm/html/NMSettingWirelessSecurity.html') diff --git a/docs/libnm/html/NMSettingWirelessSecurity.html b/docs/libnm/html/NMSettingWirelessSecurity.html index a3da2fde..94ea9577 100644 --- a/docs/libnm/html/NMSettingWirelessSecurity.html +++ b/docs/libnm/html/NMSettingWirelessSecurity.html @@ -8,7 +8,7 @@ - + @@ -38,8 +38,8 @@ use WEP, LEAP, WPA or WPA2/RSN security

Functions

--++ @@ -326,7 +326,7 @@ use WEP, LEAP, WPA or WPA2/RSN security

- + @@ -364,7 +364,7 @@ use WEP, LEAP, WPA or WPA2/RSN security

- + @@ -390,7 +390,7 @@ use WEP, LEAP, WPA or WPA2/RSN security

- + - + - +
gint filsRead / Write / ConstructRead / Write
GStrv
gint pmfRead / Write / ConstructRead / Write
GStrv
NMWepKeyType wep-key-typeRead / Write / ConstructRead / Write
@@ -419,12 +419,12 @@ use WEP, LEAP, WPA or WPA2/RSN security

guint wep-tx-keyidxRead / Write / ConstructRead / Write
guint wps-methodRead / Write / ConstructRead / Write
@@ -433,8 +433,8 @@ use WEP, LEAP, WPA or WPA2/RSN security

Types and Values

--++ @@ -1915,6 +1915,7 @@ although, with the same numeric values.

for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -1930,7 +1931,8 @@ if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (enable FILS and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT and no global default is set, FILS will be optionally enabled.

-

Flags: Read / Write / Construct

+

Owner: NMSettingWirelessSecurity

+

Flags: Read / Write

Default value: 0

Since: 1.12

@@ -1942,6 +1944,7 @@ no global default is set, FILS will be optionally enabled.

connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -1950,8 +1953,10 @@ list element may be one of "wep40", "wep104", "tkip", or "ccmp".

  “key-mgmt”                 gchar *

Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" -(SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for +(SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" +(WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -1961,6 +1966,7 @@ any Wi-Fi connection that uses security.

  “leap-password”            gchar *

The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -1970,6 +1976,7 @@ any Wi-Fi connection that uses security.

  “leap-password-flags”      NMSettingSecretFlags

Flags indicating how to handle the “leap-password” property.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -1978,6 +1985,7 @@ any Wi-Fi connection that uses security.

  “leap-username”            gchar *

The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -1989,6 +1997,7 @@ any Wi-Fi connection that uses security.

Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp".

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -2003,7 +2012,8 @@ the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (enable PMF and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT and no global default is set, PMF will be optionally enabled.

-

Flags: Read / Write / Construct

+

Owner: NMSettingWirelessSecurity

+

Flags: Read / Write

Default value: 0

Since: 1.10

@@ -2014,6 +2024,7 @@ global default is set, PMF will be optionally enabled.

List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -2025,6 +2036,7 @@ passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -2034,6 +2046,7 @@ of any length for SAE authentication.

  “psk-flags”                NMSettingSecretFlags

Flags indicating how to handle the “psk” property.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -2043,6 +2056,7 @@ property.

Flags indicating how to handle the “wep-key0”, “wep-key1”, “wep-key2”, and “wep-key3” properties.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

@@ -2055,7 +2069,8 @@ and NM_WEP_KEY_TYPE_PASSPHRASE, in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.

-

Flags: Read / Write / Construct

+

Owner: NMSettingWirelessSecurity

+

Flags: Read / Write

Default value: NM_WEP_KEY_TYPE_UNKNOWN

@@ -2064,6 +2079,7 @@ the actual WEP key.

  “wep-key0”                 gchar *

Index 0 WEP key. This is the WEP key used in most networks. See the "wep-key-type" property for a description of how this key is interpreted.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -2073,6 +2089,7 @@ the actual WEP key.

  “wep-key1”                 gchar *

Index 1 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -2082,6 +2099,7 @@ the actual WEP key.

  “wep-key2”                 gchar *

Index 2 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -2091,6 +2109,7 @@ the actual WEP key.

  “wep-key3”                 gchar *

Index 3 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted.

+

Owner: NMSettingWirelessSecurity

Flags: Read / Write

Default value: NULL

@@ -2102,7 +2121,8 @@ the actual WEP key.

index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.

-

Flags: Read / Write / Construct

+

Owner: NMSettingWirelessSecurity

+

Flags: Read / Write

Allowed values: <= 3

Default value: 0

@@ -2115,13 +2135,14 @@ Linksys WRT54G) number the keys 1 - 4.

automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities.

WPS can be disabled by setting this property to a value of 1.

-

Flags: Read / Write / Construct

+

Owner: NMSettingWirelessSecurity

+

Flags: Read / Write

Default value: 0

Since: 1.10

-
Generated by GTK-Doc V1.29
+
Generated by GTK-Doc V1.32.1 \ No newline at end of file -- cgit 1.3.0-6-gf8a5