Object Hierarchy

    GEnum
+    ├── NMSettingWirelessSecurityFils
     ├── NMSettingWirelessSecurityPmf
     ├── NMSettingWirelessSecurityWpsMethod
     ╰── NMWepKeyType
-    GObject
+    GObject
     ╰── NMSetting
         ╰── NMSettingWirelessSecurity

@@ -591,7 +613,7 @@ nm_setting_wireless_security_get_key_mgmt

nm_setting_wireless_security_get_num_protos ()

guint32
+guint32
 nm_setting_wireless_security_get_num_protos
                                (NMSettingWirelessSecurity *setting);
 
@@ -621,7 +643,7 @@ connecting to secure Wi-Fi networks
 const char *
 nm_setting_wireless_security_get_proto
                                (NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);

Parameters

@@ -653,7 +675,7 @@ nm_setting_wireless_security_get_proto

nm_setting_wireless_security_add_proto ()

gboolean
+gboolean
 nm_setting_wireless_security_add_proto
                                (NMSettingWirelessSecurity *setting,
                                 const char *proto);
@@ -687,8 +709,8 @@ with the access point.

Returns

TRUE if the protocol was new and was added to the allowed -protocol list, or FALSE if it was already in the list

TRUE if the protocol was new and was added to the allowed +protocol list, or FALSE if it was already in the list

@@ -697,7 +719,7 @@ protocol list, or

void
 nm_setting_wireless_security_remove_proto
                                (

NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);
 Removes a protocol from the allowed protocol list.
 
 Parameters
@@ -725,7 +747,7 @@ nm_setting_wireless_security_remove_proto
 
 
 nm_setting_wireless_security_remove_proto_by_value ()
-gboolean
+gboolean
 nm_setting_wireless_security_remove_proto_by_value
                                (NMSettingWirelessSecurity *setting,
                                 const char *proto);
@@ -754,7 +776,7 @@ nm_setting_wireless_security_remove_proto_by_value
 
 
 Returns
- TRUE if the protocol was found and removed; FALSE if it was not.
+ TRUE if the protocol was found and removed; FALSE if it was not.
 
 
 
@@ -784,7 +806,7 @@ specified then all protocols are allowed.
 
 
 nm_setting_wireless_security_get_num_pairwise ()
-guint32
+guint32
 nm_setting_wireless_security_get_num_pairwise
                                (NMSettingWirelessSecurity *setting);
 
@@ -813,7 +835,7 @@ nm_setting_wireless_security_get_num_pairwise
 const char *
 nm_setting_wireless_security_get_pairwise
                                (NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);
 Returns the allowed pairwise encryption algorithm from allowed algorithm
 list.
 
@@ -847,7 +869,7 @@ list.
 
 
 nm_setting_wireless_security_add_pairwise ()
-gboolean
+gboolean
 nm_setting_wireless_security_add_pairwise
                                (NMSettingWirelessSecurity *setting,
                                 const char *pairwise);
@@ -879,7 +901,7 @@ compatible with this connection.
 
 
 Returns
- TRUE if the algorithm was added to the list, FALSE if it was
+
 TRUE if the algorithm was added to the list, FALSE if it was
 already in the list
 
 
@@ -889,7 +911,7 @@ already in the list
 void
 nm_setting_wireless_security_remove_pairwise
                                (NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);
 Removes an encryption algorithm from the allowed pairwise encryption
 algorithm list.
 
@@ -918,7 +940,7 @@ algorithm list.
 
 
 nm_setting_wireless_security_remove_pairwise_by_value ()
-gboolean
+gboolean
 nm_setting_wireless_security_remove_pairwise_by_value
                                (NMSettingWirelessSecurity *setting,
                                 const char *pairwise);
@@ -948,7 +970,7 @@ algorithm list.
 
 
 Returns
- TRUE if the encryption algorith was found and removed; FALSE if it was not.
+ TRUE if the encryption algorith was found and removed; FALSE if it was not.
 
 
 
@@ -978,7 +1000,7 @@ specified then all pairwise encryption algorithms are allowed.
 
 
 nm_setting_wireless_security_get_num_groups ()
-guint32
+guint32
 nm_setting_wireless_security_get_num_groups
                                (NMSettingWirelessSecurity *setting);
 
@@ -1007,7 +1029,7 @@ nm_setting_wireless_security_get_num_groups
 const char *
 nm_setting_wireless_security_get_group
                                (NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);
 Returns the allowed groupwise encryption algorithm from allowed algorithm
 list.
 
@@ -1041,7 +1063,7 @@ list.
 
 
 nm_setting_wireless_security_add_group ()
-gboolean
+gboolean
 nm_setting_wireless_security_add_group
                                (NMSettingWirelessSecurity *setting,
                                 const char *group);
@@ -1074,7 +1096,7 @@ compatible with this connection.
 
 
 Returns
- TRUE if the algorithm was added to the list, FALSE if it was
+
 TRUE if the algorithm was added to the list, FALSE if it was
 already in the list
 
 
@@ -1084,7 +1106,7 @@ already in the list
 void
 nm_setting_wireless_security_remove_group
                                (NMSettingWirelessSecurity *setting,
-                                guint32 i);
+                                guint32 i);
 Removes an encryption algorithm from the allowed groupwise encryption
 algorithm list.
 
@@ -1113,7 +1135,7 @@ algorithm list.
 
 
 nm_setting_wireless_security_remove_group_by_value ()
-gboolean
+gboolean
 nm_setting_wireless_security_remove_group_by_value
                                (NMSettingWirelessSecurity *setting,
                                 const char *group);
@@ -1144,7 +1166,7 @@ algorithm list.
 
 
 Returns
- TRUE if the algorithm was found and removed; FALSE if it was not.
+ TRUE if the algorithm was found and removed; FALSE if it was not.
 
 
 
@@ -1314,7 +1336,7 @@ nm_setting_wireless_security_get_leap_password_flags
 const char *
 nm_setting_wireless_security_get_wep_key
                                (NMSettingWirelessSecurity *setting,
-                                guint32 idx);
+                                guint32 idx);
 
 Parameters


@@ -1348,7 +1370,7 @@ nm_setting_wireless_security_get_wep_key
 void
 nm_setting_wireless_security_set_wep_key
                                (NMSettingWirelessSecurity *setting,
-                                guint32 idx,
+                                guint32 idx,
                                 const char *key);
 Sets a WEP key in the given index.
 
@@ -1384,7 +1406,7 @@ property.
 
 
 nm_setting_wireless_security_get_wep_tx_keyidx ()
-guint32
+guint32
 nm_setting_wireless_security_get_wep_tx_keyidx
                                (NMSettingWirelessSecurity *setting);
 
@@ -1512,6 +1534,12 @@ nm_setting_wireless_security_get_wps_method
 
 Since: 1.10
 
+
+
+nm_setting_wireless_security_get_fils ()
+NMSettingWirelessSecurityFils
+nm_setting_wireless_security_get_fils (NMSettingWirelessSecurity *setting);
+
 
 
 Types and Values
@@ -1689,6 +1717,66 @@ the actual WEP key using the MD5 hash algorithm.
 
 
 
+enum NMSettingWirelessSecurityFils
+These flags indicate whether FILS must be enabled.
+
+Members
+

+++

+
+

NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT	+ use the default value +
NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE	+ disable FILS +
NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL	+ enable FILS if the supplicant and the AP support it +
NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED	+ require FILS and fail if not available +
_NM_SETTING_WIRELESS_SECURITY_FILS_NUM	+ placeholder value for bounds-checking +
NM_SETTING_WIRELESS_SECURITY_FILS_LAST	+ placeholder value for bounds-checking +


+Since: 1.12
+


+
+
 NM_SETTING_WIRELESS_SECURITY_KEY_MGMT
 #define NM_SETTING_WIRELESS_SECURITY_KEY_MGMT "key-mgmt"
 
@@ -1803,6 +1891,12 @@ the actual WEP key using the MD5 hash algorithm.
 
 
 
+NM_SETTING_WIRELESS_SECURITY_FILS
+#define NM_SETTING_WIRELESS_SECURITY_FILS "fils"
+
+
+
+
 NMSettingWirelessSecurity
 typedef struct _NMSettingWirelessSecurity NMSettingWirelessSecurity;
 Wi-Fi Security Settings
@@ -1812,7 +1906,7 @@ the actual WEP key using the MD5 hash algorithm.
 Property Details
 
 The “auth-alg” property
-  “auth-alg”                 gchar *
+  “auth-alg”                 gchar *
 When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the
 802.11 authentication algorithm required by the AP here.  One of "open"
 for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When
@@ -1823,8 +1917,24 @@ using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the
 
 
 
+The “fils” property
+  “fils”                     gint
+Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for
+the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (use
+global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE
+(disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (enable FILS
+if the supplicant and the access point support it) or
+NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (enable FILS and fail if not
+supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT and
+no global default is set, FILS will be optionally enabled.
+Flags: Read / Write / Construct
+Default value: 0
+Since: 1.12
+
+
+
 The “group” property
-  “group”                    GStrv
+  “group”                    GStrv
 A list of group/broadcast encryption algorithms which prevents
 connections to Wi-Fi networks that do not utilize one of the algorithms
 in the list.  For maximum compatibility leave this property empty.  Each
@@ -1834,7 +1944,7 @@ list element may be one of "wep40", "wep104", "tkip", or "ccmp".
 
 
 The “key-mgmt” property
-  “key-mgmt”                 gchar *
+  “key-mgmt”                 gchar *
 Key management used for the connection.  One of "none" (WEP), "ieee8021x"
 (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure
 WPA-PSK), or "wpa-eap" (WPA-Enterprise).  This property must be set for
@@ -1845,7 +1955,7 @@ any Wi-Fi connection that uses security.
 
 
 The “leap-password” property
-  “leap-password”            gchar *
+  “leap-password”            gchar *
 The login password for legacy LEAP connections (ie, key-mgmt =
 "ieee8021x" and auth-alg = "leap").
 Flags: Read / Write
@@ -1862,7 +1972,7 @@ any Wi-Fi connection that uses security.
 
 
 The “leap-username” property
-  “leap-username”            gchar *
+  “leap-username”            gchar *
 The login username for legacy LEAP connections (ie, key-mgmt =
 "ieee8021x" and auth-alg = "leap").
 Flags: Read / Write
@@ -1871,7 +1981,7 @@ any Wi-Fi connection that uses security.
 
 
 The “pairwise” property
-  “pairwise”                 GStrv
+  “pairwise”                 GStrv
 A list of pairwise encryption algorithms which prevents connections to
 Wi-Fi networks that do not utilize one of the algorithms in the list.
 For maximum compatibility leave this property empty.  Each list element
@@ -1881,7 +1991,7 @@ may be one of "tkip" or "ccmp".
 
 
 The “pmf” property
-  “pmf”                      gint
+  “pmf”                      gint
 Indicates whether Protected Management Frames (802.11w) must be enabled
 for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT
 (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE
@@ -1897,7 +2007,7 @@ global default is set, PMF will be optionally enabled.
 
 
 The “proto” property
-  “proto”                    GStrv
+  “proto”                    GStrv
 List of strings specifying the allowed WPA protocol versions to use.
 Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If
 not specified, both WPA and RSN connections are allowed.
@@ -1906,7 +2016,7 @@ not specified, both WPA and RSN connections are allowed.
 
 
 The “psk” property
-  “psk”                      gchar *
+  “psk”                      gchar *
 Pre-Shared-Key for WPA networks.  If the key is 64-characters long, it
 must contain only hexadecimal characters and is interpreted as a
 hexadecimal WPA key.  Otherwise, the key must be between 8 and 63 ASCII
@@ -1949,7 +2059,7 @@ the actual WEP key.
 
 
 The “wep-key0” property
-  “wep-key0”                 gchar *
+  “wep-key0”                 gchar *
 Index 0 WEP key.  This is the WEP key used in most networks.  See the
 "wep-key-type" property for a description of how this key is interpreted.
 Flags: Read / Write
@@ -1958,7 +2068,7 @@ the actual WEP key.
 
 
 The “wep-key1” property
-  “wep-key1”                 gchar *
+  “wep-key1”                 gchar *
 Index 1 WEP key.  This WEP index is not used by most networks.  See the
 "wep-key-type" property for a description of how this key is interpreted.
 Flags: Read / Write
@@ -1967,7 +2077,7 @@ the actual WEP key.
 
 
 The “wep-key2” property
-  “wep-key2”                 gchar *
+  “wep-key2”                 gchar *
 Index 2 WEP key.  This WEP index is not used by most networks.  See the
 "wep-key-type" property for a description of how this key is interpreted.
 Flags: Read / Write
@@ -1976,7 +2086,7 @@ the actual WEP key.
 
 
 The “wep-key3” property
-  “wep-key3”                 gchar *
+  “wep-key3”                 gchar *
 Index 3 WEP key.  This WEP index is not used by most networks.  See the
 "wep-key-type" property for a description of how this key is interpreted.
 Flags: Read / Write
@@ -1985,7 +2095,7 @@ the actual WEP key.
 
 
 The “wep-tx-keyidx” property
-  “wep-tx-keyidx”            guint
+  “wep-tx-keyidx”            guint
 When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key
 index is used by the AP, put that WEP key index here.  Valid values are 0
 (default key) through 3.  Note that some consumer access points (like the
@@ -1997,7 +2107,7 @@ Linksys WRT54G) number the keys 1 - 4.
 
 
 The “wps-method” property
-  “wps-method”               guint
+  “wps-method”               guint
 Flags indicating which mode of WPS is to be used if any.
 There's little point in changing the default setting as NetworkManager will
 automatically determine whether it's feasible to start WPS enrollment from
@@ -2010,6 +2120,6 @@ the Access Point capabilities.
 
 
 
-
Generated by GTK-Doc V1.27
+
Generated by GTK-Doc V1.28
 
 
\ No newline at end of file
-- 
cgit 1.3.0-6-gf8a5

NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT	- use the default value -
NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE	- disable FILS -
NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL	- enable FILS if the supplicant and the AP support it -
NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED	- require FILS and fail if not available -
_NM_SETTING_WIRELESS_SECURITY_FILS_NUM	- placeholder value for bounds-checking -
NM_SETTING_WIRELESS_SECURITY_FILS_LAST	- placeholder value for bounds-checking -