--++ @@ -252,7 +252,7 @@ - + - + - + - +

gboolean auto-negotiate Read / Write / Construct Read / Write

@@ -286,7 +286,7 @@

guint mtu Read / Write / Construct Read / Write

@@ -314,12 +314,12 @@

guint speed Read / Write / Construct Read / Write

guint wake-on-lan Read / Write / Construct Read / Write

@@ -334,8 +334,8 @@

Types and Values

--++ @@ -1277,9 +1277,9 @@ are supported by all devices.

@@ -1302,7 +1302,7 @@ are supported by all devices.

@@ -1415,7 +1415,8 @@ and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.

Flags: Read / Write / Construct

Owner: NMSettingWired

Flags: Read / Write

Default value: FALSE

@@ -1437,6 +1438,7 @@ of NetworkManager.conf. If still unspecified, it defaults to "preserve" (older versions of NetworkManager may use a different default value).

On D-Bus, this field is expressed as "assigned-mac-address" or the deprecated "cloned-mac-address".

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1456,6 +1458,7 @@ be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1487,6 +1490,7 @@ globally-administered, burned-in MAC address.

them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1497,6 +1501,7 @@ administered.

If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1508,6 +1513,7 @@ MAC address of the device (i.e. MAC spoofing).

whose permanent MAC address matches an address in the list. Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).

Owner: NMSettingWired

Flags: Read / Write

@@ -1516,7 +1522,8 @@ address is in the standard hex-digits-and-colons notation

  “mtu”                      guint

If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.

Flags: Read / Write / Construct

Owner: NMSettingWired

Flags: Read / Write

Default value: 0

@@ -1527,6 +1534,7 @@ breaking larger packets up into multiple Ethernet frames.

attachment methods. One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored.

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1536,6 +1544,7 @@ If the device supports only one port type, this setting is ignored.

  “s390-nettype”             gchar *

s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems.

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

@@ -1543,6 +1552,7 @@ the different types of virtual network devices available on s390 systems.

The `“s390-options”` property

  “s390-options”             GHashTable *

Owner: NMSettingWired

Flags: Read / Write

@@ -1556,6 +1566,7 @@ can be used to ensure this connection only applies to the network device that uses these subchannels. The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.

Owner: NMSettingWired

Flags: Read / Write

@@ -1575,7 +1586,8 @@ will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.

Flags: Read / Write / Construct

Owner: NMSettingWired

Flags: Read / Write

Default value: 0

@@ -1590,7 +1602,8 @@ May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (to disable management of Wake-on-LAN in NetworkManager).

Flags: Read / Write / Construct

Owner: NMSettingWired

Flags: Read / Write

Default value: 1

Since: 1.2

@@ -1601,6 +1614,7 @@ NetworkManager).

If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address. If NULL, no password will be required.

Owner: NMSettingWired

Flags: Read / Write

Default value: NULL

Since: 1.2

@@ -1608,6 +1622,6 @@ no password will be required.

Generated by GTK-Doc V1.32.1 \ No newline at end of file -- cgit 1.3.0-6-gf8a5 From d460892bbfece74fb6d3cd846bf6ef548290be41 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Fri, 8 May 2020 21:40:53 +0200 Subject: New upstream version 1.24.0 --- docs/libnm/html/NMSettingWired.html | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/libnm/html/NMSettingWired.html') diff --git a/docs/libnm/html/NMSettingWired.html b/docs/libnm/html/NMSettingWired.html index 1cc3df69..17dd194f 100644 --- a/docs/libnm/html/NMSettingWired.html +++ b/docs/libnm/html/NMSettingWired.html @@ -8,7 +8,7 @@ - + @@ -1622,6 +1622,6 @@ no password will be required.

Generated by GTK-Doc V1.32 \ No newline at end of file -- cgit 1.3.0-6-gf8a5

NM_SETTING_WIRED_WAKE_ON_LAN_ALL

Wake on all events. This does not - include the exclusive flags NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT +include the exclusive flags NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT or - NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE +NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE .

NM_SETTING_WIRED_WAKE_ON_LAN_EXCLUSIVE_FLAGS

Mask of flags that are - incompatible with other flags

+incompatible with other flags

Functions

Types and Values

The “s390-options” property

The `“s390-options”` property