Object Hierarchy

GFlags ╰── NMSettingDcbFlags - GObject - ╰── NMSetting - ╰── NMSettingDcb

@@ -456,7 +354,7 @@ nm_setting_dcb_get_app_fcoe_flags (Returns - the “app-fcoe-flags” property of the setting + the “app-fcoe-flags” property of the setting


 
@@ -481,7 +379,7 @@ nm_setting_dcb_get_app_fcoe_priority (
 Returns
- the “app-fcoe-priority” property of the setting
+ the “app-fcoe-priority” property of the setting
 
 
 
@@ -506,7 +404,7 @@ nm_setting_dcb_get_app_fcoe_mode (
 
 Returns
- the “app-fcoe-mode” property of the setting
+ the “app-fcoe-mode” property of the setting
 
 
 
@@ -531,7 +429,7 @@ nm_setting_dcb_get_app_iscsi_flags (
 
 Returns
- the “app-iscsi-flags” property of the setting
+ the “app-iscsi-flags” property of the setting
 
 
 
@@ -556,7 +454,7 @@ nm_setting_dcb_get_app_iscsi_priority (
 Returns
- the “app-iscsi-priority” property of the setting
+ the “app-iscsi-priority” property of the setting
 
 
 
@@ -581,7 +479,7 @@ nm_setting_dcb_get_app_fip_flags (
 
 Returns
- the “app-fip-flags” property of the setting
+ the “app-fip-flags” property of the setting
 
 
 
@@ -606,7 +504,7 @@ nm_setting_dcb_get_app_fip_priority (
 
 Returns
- the “app-fip-priority” property of the setting
+ the “app-fip-priority” property of the setting
 
 
 
@@ -632,7 +530,7 @@ nm_setting_dcb_get_priority_flow_control_flags
 
 
 Returns
- the “priority-flow-control-flags” property of the setting
+ the “priority-flow-control-flags” property of the setting
 
 
 
@@ -679,7 +577,7 @@ nm_setting_dcb_set_priority_flow_control
                                (NMSettingDcb *setting,
                                 guint user_priority,
                                 gboolean enabled);
-These values are only valid when “priority-flow-control” includes
+
These values are only valid when “priority-flow-control” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -732,7 +630,7 @@ nm_setting_dcb_get_priority_group_flags
 
 
 Returns
- the “priority-group-flags” property of the setting
+ the “priority-group-flags” property of the setting
 
 
 
@@ -767,7 +665,7 @@ nm_setting_dcb_get_priority_group_id (Returns
  the group number user_priority
 is assigned to.  These values are
-only valid when “priority-group-flags” includes the
+only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
@@ -778,7 +676,7 @@ only valid when NMSettingDcb *setting,
                                       guint user_priority,
                                       guint group_id);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -843,7 +741,7 @@ nm_setting_dcb_get_priority_group_bandwidth
 Returns
  the bandwidth percentage assigned to group_id
 .  These values are
-only valid when “priority-group-flags” includes the
+only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
@@ -855,7 +753,7 @@ nm_setting_dcb_set_priority_group_bandwidth
                                (NMSettingDcb *setting,
                                 guint group_id,
                                 guint bandwidth_percent);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -918,7 +816,7 @@ nm_setting_dcb_get_priority_bandwidth (Returns
  the allowed bandwidth percentage of user_priority
 in its priority group.
-These values are only valid when “priority-group-flags” includes the
+These values are only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 

 
@@ -929,7 +827,7 @@ These values are only valid when NMSettingDcb *setting,
                                        guint user_priority,
                                        guint bandwidth_percent);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -995,7 +893,7 @@ nm_setting_dcb_get_priority_strict_bandwidth
  TRUE if user_priority
 may use all of the bandwidth allocated to its
 assigned group, or FALSE if not. These values are only valid when
-“priority-group-flags” includes the NM_SETTING_DCB_FLAG_ENABLE flag.
+“priority-group-flags” includes the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
 
@@ -1006,7 +904,7 @@ nm_setting_dcb_set_priority_strict_bandwidth
                                (NMSettingDcb *setting,
                                 guint user_priority,
                                 gboolean strict);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -1071,7 +969,7 @@ nm_setting_dcb_get_priority_traffic_class
 Returns
  the traffic class assigned to user_priority
 . These values are only
-valid when “priority-group-flags” includes the
+valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
@@ -1242,179 +1140,6 @@ peer configuration advertisements
 #define NM_SETTING_DCB_PRIORITY_TRAFFIC_CLASS    "priority-traffic-class"
 
 
-
-
-NMSettingDcb
-typedef struct _NMSettingDcb NMSettingDcb;
-Data Center Bridging Settings
-
-
-
-Property Details
-
-The “app-fcoe-flags” property
-  “app-fcoe-flags”           NMSettingDcbFlags
-Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may
-be any combination of NM_SETTING_DCB_FLAG_ENABLE,
-NM_SETTING_DCB_FLAG_ADVERTISE, and NM_SETTING_DCB_FLAG_WILLING.
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “app-fcoe-mode” property
-  “app-fcoe-mode”            char *
-The FCoE controller mode; either NM_SETTING_DCB_FCOE_MODE_FABRIC
-(default) or NM_SETTING_DCB_FCOE_MODE_VN2VN.
-Owner: NMSettingDcb
-Flags: Read / Write
-Default value: "fabric"
-
-
-
-The “app-fcoe-priority” property
-  “app-fcoe-priority”        int
-The highest User Priority (0 - 7) which FCoE frames should use, or -1 for
-default priority.  Only used when the “app-fcoe-flags”
-property includes the NM_SETTING_DCB_FLAG_ENABLE flag.
-Owner: NMSettingDcb
-Flags: Read / Write
-Allowed values: [-1,7]
-Default value: -1
-
-
-
-The “app-fip-flags” property
-  “app-fip-flags”            NMSettingDcbFlags
-Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may
-be any combination of NM_SETTING_DCB_FLAG_ENABLE,
-NM_SETTING_DCB_FLAG_ADVERTISE, and NM_SETTING_DCB_FLAG_WILLING.
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “app-fip-priority” property
-  “app-fip-priority”         int
-The highest User Priority (0 - 7) which FIP frames should use, or -1 for
-default priority.  Only used when the “app-fip-flags”
-property includes the NM_SETTING_DCB_FLAG_ENABLE flag.
-Owner: NMSettingDcb
-Flags: Read / Write
-Allowed values: [-1,7]
-Default value: -1
-
-
-
-The “app-iscsi-flags” property
-  “app-iscsi-flags”          NMSettingDcbFlags
-Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags
-may be any combination of NM_SETTING_DCB_FLAG_ENABLE,
-NM_SETTING_DCB_FLAG_ADVERTISE, and NM_SETTING_DCB_FLAG_WILLING.
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “app-iscsi-priority” property
-  “app-iscsi-priority”       int
-The highest User Priority (0 - 7) which iSCSI frames should use, or -1
-for default priority. Only used when the “app-iscsi-flags”
-property includes the NM_SETTING_DCB_FLAG_ENABLE flag.
-Owner: NMSettingDcb
-Flags: Read / Write
-Allowed values: [-1,7]
-Default value: -1
-
-
-
-The “priority-bandwidth” property
-  “priority-bandwidth”       GArray *
-An array of 8 uint values, where the array index corresponds to the User
-Priority (0 - 7) and the value indicates the percentage of bandwidth of
-the priority's assigned group that the priority may use.  The sum of all
-percentages for priorities which belong to the same group must total 100
-percents.
-[type GArray(guint)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-flow-control” property
-  “priority-flow-control”    GArray *
-An array of 8 boolean values, where the array index corresponds to the User
-Priority (0 - 7) and the value indicates whether or not the corresponding
-priority should transmit priority pause.
-[type GArray(gboolean)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-flow-control-flags” property
-  “priority-flow-control-flags” NMSettingDcbFlags
-Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC).
-Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE,
-NM_SETTING_DCB_FLAG_ADVERTISE, and NM_SETTING_DCB_FLAG_WILLING.
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-group-bandwidth” property
-  “priority-group-bandwidth” GArray *
-An array of 8 uint values, where the array index corresponds to the
-Priority Group ID (0 - 7) and the value indicates the percentage of link
-bandwidth allocated to that group.  Allowed values are 0 - 100, and the
-sum of all values must total 100 percents.
-[type GArray(guint)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-group-flags” property
-  “priority-group-flags”     NMSettingDcbFlags
-Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be
-any combination of NM_SETTING_DCB_FLAG_ENABLE,
-NM_SETTING_DCB_FLAG_ADVERTISE, and NM_SETTING_DCB_FLAG_WILLING.
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-group-id” property
-  “priority-group-id”        GArray *
-An array of 8 uint values, where the array index corresponds to the User
-Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed
-Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
-[type GArray(guint)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-strict-bandwidth” property
-  “priority-strict-bandwidth” GArray *
-An array of 8 boolean values, where the array index corresponds to the User
-Priority (0 - 7) and the value indicates whether or not the priority may
-use all of the bandwidth allocated to its assigned group.
-[type GArray(gboolean)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
-
-
-The “priority-traffic-class” property
-  “priority-traffic-class”   GArray *
-An array of 8 uint values, where the array index corresponds to the User
-Priority (0 - 7) and the value indicates the traffic class (0 - 7) to
-which the priority is mapped.
-[type GArray(guint)]
-Owner: NMSettingDcb
-Flags: Read / Write
-
 
 
 
-- 
cgit 1.3.0-6-gf8a5


From 88c227d90a6b7b388c5c85d72802a0ca8f05ed5c Mon Sep 17 00:00:00 2001
From: Michael Biebl 
Date: Thu, 13 Jan 2022 22:30:39 +0100
Subject: New upstream version 1.34.0

---
 docs/libnm/html/NMSettingDcb.html | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

(limited to 'docs/libnm/html/NMSettingDcb.html')

diff --git a/docs/libnm/html/NMSettingDcb.html b/docs/libnm/html/NMSettingDcb.html
index 7c2467d0..e23ecdb6 100644
--- a/docs/libnm/html/NMSettingDcb.html
+++ b/docs/libnm/html/NMSettingDcb.html
@@ -354,7 +354,7 @@ nm_setting_dcb_get_app_fcoe_flags (
 
 Returns
- the “app-fcoe-flags” property of the setting
+ the “app-fcoe-flags” property of the setting
 
 

 
@@ -379,7 +379,7 @@ nm_setting_dcb_get_app_fcoe_priority (
 Returns
- the “app-fcoe-priority” property of the setting
+ the “app-fcoe-priority” property of the setting
 
 
 
@@ -404,7 +404,7 @@ nm_setting_dcb_get_app_fcoe_mode (
 
 Returns
- the “app-fcoe-mode” property of the setting
+ the “app-fcoe-mode” property of the setting
 
 
 
@@ -429,7 +429,7 @@ nm_setting_dcb_get_app_iscsi_flags (
 
 Returns
- the “app-iscsi-flags” property of the setting
+ the “app-iscsi-flags” property of the setting
 
 
 
@@ -454,7 +454,7 @@ nm_setting_dcb_get_app_iscsi_priority (
 Returns
- the “app-iscsi-priority” property of the setting
+ the “app-iscsi-priority” property of the setting
 
 
 
@@ -479,7 +479,7 @@ nm_setting_dcb_get_app_fip_flags (
 
 Returns
- the “app-fip-flags” property of the setting
+ the “app-fip-flags” property of the setting
 
 
 
@@ -504,7 +504,7 @@ nm_setting_dcb_get_app_fip_priority (
 
 Returns
- the “app-fip-priority” property of the setting
+ the “app-fip-priority” property of the setting
 
 
 
@@ -530,7 +530,7 @@ nm_setting_dcb_get_priority_flow_control_flags
 
 
 Returns
- the “priority-flow-control-flags” property of the setting
+ the “priority-flow-control-flags” property of the setting
 
 
 
@@ -577,7 +577,7 @@ nm_setting_dcb_set_priority_flow_control
                                (NMSettingDcb *setting,
                                 guint user_priority,
                                 gboolean enabled);
-These values are only valid when “priority-flow-control” includes
+
These values are only valid when “priority-flow-control” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -630,7 +630,7 @@ nm_setting_dcb_get_priority_group_flags
 
 
 Returns
- the “priority-group-flags” property of the setting
+ the “priority-group-flags” property of the setting
 
 
 
@@ -665,7 +665,7 @@ nm_setting_dcb_get_priority_group_id (Returns
  the group number user_priority
 is assigned to.  These values are
-only valid when “priority-group-flags” includes the
+only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
@@ -676,7 +676,7 @@ only valid when <
 nm_setting_dcb_set_priority_group_id (NMSettingDcb *setting,
                                       guint user_priority,
                                       guint group_id);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -741,7 +741,7 @@ nm_setting_dcb_get_priority_group_bandwidth
 Returns
  the bandwidth percentage assigned to group_id
 .  These values are
-only valid when “priority-group-flags” includes the
+only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
@@ -753,7 +753,7 @@ nm_setting_dcb_set_priority_group_bandwidth
                                (NMSettingDcb *setting,
                                 guint group_id,
                                 guint bandwidth_percent);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -816,7 +816,7 @@ nm_setting_dcb_get_priority_bandwidth (Returns
  the allowed bandwidth percentage of user_priority
 in its priority group.
-These values are only valid when “priority-group-flags” includes the
+These values are only valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 

 
@@ -827,7 +827,7 @@ These values are only valid when NMSettingDcb *setting,
                                        guint user_priority,
                                        guint bandwidth_percent);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -893,7 +893,7 @@ nm_setting_dcb_get_priority_strict_bandwidth
  TRUE if user_priority
 may use all of the bandwidth allocated to its
 assigned group, or FALSE if not. These values are only valid when
-“priority-group-flags” includes the NM_SETTING_DCB_FLAG_ENABLE flag.
+“priority-group-flags” includes the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
 
@@ -904,7 +904,7 @@ nm_setting_dcb_set_priority_strict_bandwidth
                                (NMSettingDcb *setting,
                                 guint user_priority,
                                 gboolean strict);
-These values are only valid when “priority-group-flags” includes
+
These values are only valid when “priority-group-flags” includes
 the NM_SETTING_DCB_FLAG_ENABLE flag.
 
 Parameters
@@ -969,7 +969,7 @@ nm_setting_dcb_get_priority_traffic_class
 Returns
  the traffic class assigned to user_priority
 . These values are only
-valid when “priority-group-flags” includes the
+valid when “priority-group-flags” includes the
 NM_SETTING_DCB_FLAG_ENABLE flag.
 
 
-- 
cgit 1.3.0-6-gf8a5

NMSettingDcbFlags	app-fcoe-flags	Read / Write
-char *	app-fcoe-mode	Read / Write
int	app-fcoe-priority	Read / Write
NMSettingDcbFlags	app-fip-flags	Read / Write
int	app-fip-priority	Read / Write
NMSettingDcbFlags	app-iscsi-flags	Read / Write
int	app-iscsi-priority	Read / Write
-GArray *	priority-bandwidth	Read / Write
-GArray *	priority-flow-control	Read / Write
NMSettingDcbFlags	priority-flow-control-flags	Read / Write
-GArray *	priority-group-bandwidth	Read / Write
NMSettingDcbFlags	priority-group-flags	Read / Write
-GArray *	priority-group-id	Read / Write
-GArray *	priority-strict-bandwidth	Read / Write
-GArray *	priority-traffic-class	Read / Write

Returns

Properties

Types and Values

Object Hierarchy

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Parameters

Returns

Returns

Parameters

Returns

Parameters

Returns

Parameters

Parameters

Returns

NMSettingDcb

Property Details

The “app-fcoe-flags” property

The “app-fcoe-mode” property

The “app-fcoe-priority” property

The “app-fip-flags” property

The “app-fip-priority” property

The “app-iscsi-flags” property

The “app-iscsi-priority” property

The “priority-bandwidth” property

The “priority-flow-control” property

The “priority-flow-control-flags” property

The “priority-group-bandwidth” property

The “priority-group-flags” property

The “priority-group-id” property

The “priority-strict-bandwidth” property

The “priority-traffic-class” property

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Parameters

Returns

Returns

Parameters

Returns

Parameters

Returns

Parameters

Parameters

Returns

The `“app-fcoe-flags”` property

The `“app-fcoe-mode”` property

The `“app-fcoe-priority”` property

The `“app-fip-flags”` property

The `“app-fip-priority”` property

The `“app-iscsi-flags”` property

The `“app-iscsi-priority”` property

The `“priority-bandwidth”` property

The `“priority-flow-control”` property

The `“priority-flow-control-flags”` property

The `“priority-group-bandwidth”` property

The `“priority-group-flags”` property

The `“priority-group-id”` property

The `“priority-strict-bandwidth”` property

The `“priority-traffic-class”` property