NMSettingConnection: libnm Reference Manual

- - -

NMSettingConnection

NMSettingConnection — Describes general connection properties

Functions

---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

-NMSetting * -	-nm_setting_connection_new () -
const char * -	-nm_setting_connection_get_id () -
const char * -	-nm_setting_connection_get_uuid () -
const char * -	-nm_setting_connection_get_stable_id () -
const char * -	-nm_setting_connection_get_interface_name () -
const char * -	-nm_setting_connection_get_connection_type () -
-gboolean -	-nm_setting_connection_get_autoconnect () -
-int -	-nm_setting_connection_get_autoconnect_priority () -
-int -	-nm_setting_connection_get_autoconnect_retries () -
-NMConnectionMultiConnect -	-nm_setting_connection_get_multi_connect () -
-guint64 -	-nm_setting_connection_get_timestamp () -
-gboolean -	-nm_setting_connection_get_read_only () -
-guint32 -	-nm_setting_connection_get_num_permissions () -
-gboolean -	-nm_setting_connection_get_permission () -
const char * -	-nm_setting_connection_get_zone () -
-gboolean -	-nm_setting_connection_permissions_user_allowed () -
-gboolean -	-nm_setting_connection_add_permission () -
-void -	-nm_setting_connection_remove_permission () -
-gboolean -	-nm_setting_connection_remove_permission_by_value () -
const char * -	-nm_setting_connection_get_master () -
const char * -	-nm_setting_connection_get_controller () -
-gboolean -	-nm_setting_connection_is_slave_type () -
const char * -	-nm_setting_connection_get_slave_type () -
const char * -	-nm_setting_connection_get_port_type () -
-NMSettingConnectionAutoconnectSlaves -	-nm_setting_connection_get_autoconnect_slaves () -
-NMTernary -	-nm_setting_connection_get_autoconnect_ports () -
-guint32 -	-nm_setting_connection_get_num_secondaries () -
const char * -	-nm_setting_connection_get_secondary () -
-gboolean -	-nm_setting_connection_add_secondary () -
-void -	-nm_setting_connection_remove_secondary () -
-gboolean -	-nm_setting_connection_remove_secondary_by_value () -
-guint32 -	-nm_setting_connection_get_gateway_ping_timeout () -
-NMMetered -	-nm_setting_connection_get_metered () -
-NMSettingConnectionLldp -	-nm_setting_connection_get_lldp () -
-int -	-nm_setting_connection_get_auth_retries () -
-NMSettingConnectionMdns -	-nm_setting_connection_get_mdns () -
-NMSettingConnectionLlmnr -	-nm_setting_connection_get_llmnr () -
-NMSettingConnectionDnsOverTls -	-nm_setting_connection_get_dns_over_tls () -
-NMMptcpFlags -	-nm_setting_connection_get_mptcp_flags () -
-gint32 -	-nm_setting_connection_get_wait_device_timeout () -
-gint32 -	-nm_setting_connection_get_wait_activation_delay () -
-NMSettingConnectionDownOnPoweroff -	-nm_setting_connection_get_down_on_poweroff () -
const char * -	-nm_setting_connection_get_mud_url () -

Types and Values

#define	NM_SETTING_CONNECTION_SETTING_NAME
#define	NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MIN
#define	NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MAX
#define	NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_DEFAULT
#define	NM_SETTING_CONNECTION_ID
#define	NM_SETTING_CONNECTION_UUID
#define	NM_SETTING_CONNECTION_STABLE_ID
#define	NM_SETTING_CONNECTION_INTERFACE_NAME
#define	NM_SETTING_CONNECTION_TYPE
#define	NM_SETTING_CONNECTION_AUTOCONNECT
#define	NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY
#define	NM_SETTING_CONNECTION_AUTOCONNECT_RETRIES
#define	NM_SETTING_CONNECTION_MULTI_CONNECT
#define	NM_SETTING_CONNECTION_TIMESTAMP
#define	NM_SETTING_CONNECTION_READ_ONLY
#define	NM_SETTING_CONNECTION_PERMISSIONS
#define	NM_SETTING_CONNECTION_ZONE
#define	NM_SETTING_CONNECTION_MASTER
#define	NM_SETTING_CONNECTION_CONTROLLER
#define	NM_SETTING_CONNECTION_SLAVE_TYPE
#define	NM_SETTING_CONNECTION_PORT_TYPE
#define	NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES
#define	NM_SETTING_CONNECTION_AUTOCONNECT_PORTS
#define	NM_SETTING_CONNECTION_SECONDARIES
#define	NM_SETTING_CONNECTION_GATEWAY_PING_TIMEOUT
#define	NM_SETTING_CONNECTION_METERED
#define	NM_SETTING_CONNECTION_LLDP
#define	NM_SETTING_CONNECTION_AUTH_RETRIES
#define	NM_SETTING_CONNECTION_MDNS
#define	NM_SETTING_CONNECTION_LLMNR
#define	NM_SETTING_CONNECTION_DNS_OVER_TLS
#define	NM_SETTING_CONNECTION_MPTCP_FLAGS
#define	NM_SETTING_CONNECTION_WAIT_DEVICE_TIMEOUT
#define	NM_SETTING_CONNECTION_MUD_URL
#define	NM_SETTING_CONNECTION_WAIT_ACTIVATION_DELAY
#define	NM_SETTING_CONNECTION_DOWN_ON_POWEROFF
enum	NMSettingConnectionAutoconnectSlaves
enum	NMSettingConnectionLldp
enum	NMSettingConnectionMdns
enum	NMSettingConnectionLlmnr
enum	NMSettingConnectionDnsOverTls
enum	NMSettingConnectionDownOnPoweroff

Object Hierarchy

    GEnum
-    ├── NMSettingConnectionAutoconnectSlaves
-    ├── NMSettingConnectionDnsOverTls
-    ├── NMSettingConnectionDownOnPoweroff
-    ├── NMSettingConnectionLldp
-    ├── NMSettingConnectionLlmnr
-    ╰── NMSettingConnectionMdns
-

Description

The NMSettingConnection object is a NMSetting subclass that describes -properties that apply to all NMConnection objects, regardless of what type -of network connection they describe. Each NMConnection object must contain -a NMSettingConnection setting.

Functions

nm_setting_connection_new ()

NMSetting *
-nm_setting_connection_new (void);

Creates a new NMSettingConnection object with default values.

Returns

the new empty NMSettingConnection object

nm_setting_connection_get_id ()

const char *
-nm_setting_connection_get_id (NMSettingConnection *setting);

Returns the “id” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection ID

nm_setting_connection_get_uuid ()

const char *
-nm_setting_connection_get_uuid (NMSettingConnection *setting);

Returns the “uuid” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection UUID

nm_setting_connection_get_stable_id ()

const char *
-nm_setting_connection_get_stable_id (NMSettingConnection *setting);

Returns the “stable_id” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the stable-id for the connection

Since: 1.4

nm_setting_connection_get_interface_name ()

const char *
-nm_setting_connection_get_interface_name
-                               (NMSettingConnection *setting);

Returns the “interface-name” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection's interface name

nm_setting_connection_get_connection_type ()

const char *
-nm_setting_connection_get_connection_type
-                               (NMSettingConnection *setting);

Returns the “type” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection type

nm_setting_connection_get_autoconnect ()

gboolean
-nm_setting_connection_get_autoconnect (NMSettingConnection *setting);

Returns the “autoconnect” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection's autoconnect behavior

nm_setting_connection_get_autoconnect_priority ()

int
-nm_setting_connection_get_autoconnect_priority
-                               (NMSettingConnection *setting);

Returns the “autoconnect-priority” property of the connection. -The higher number, the higher priority.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection's autoconnect priority

nm_setting_connection_get_autoconnect_retries ()

int
-nm_setting_connection_get_autoconnect_retries
-                               (NMSettingConnection *setting);

Returns the “autoconnect-retries” property of the connection. -Zero means infinite, -1 means the global default value.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection's autoconnect retries

Since: 1.6

nm_setting_connection_get_multi_connect ()

NMConnectionMultiConnect
-nm_setting_connection_get_multi_connect
-                               (NMSettingConnection *setting);

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the “multi-connect” property of the connection.

Since: 1.14

nm_setting_connection_get_timestamp ()

guint64
-nm_setting_connection_get_timestamp (NMSettingConnection *setting);

Returns the “timestamp” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the connection's timestamp

nm_setting_connection_get_read_only ()

gboolean
-nm_setting_connection_get_read_only (NMSettingConnection *setting);

nm_setting_connection_get_read_only has been deprecated since version 1.44 and should not be used in newly-written code.

This property is deprecated and has no meaning.

Returns the “read-only” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

TRUE if the connection is read-only, FALSE if it is not

nm_setting_connection_get_num_permissions ()

guint32
-nm_setting_connection_get_num_permissions
-                               (NMSettingConnection *setting);

Returns the number of entries in the “permissions” -property of this setting.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the number of permissions entries

nm_setting_connection_get_permission ()

gboolean
-nm_setting_connection_get_permission (NMSettingConnection *setting,
-                                      guint32 idx,
-                                      const char **out_ptype,
-                                      const char **out_pitem,
-                                      const char **out_detail);

Retrieve one of the entries of the “permissions” property -of this setting.

Parameters

----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

setting	the NMSettingConnection
idx	the zero-based index of the permissions entry
out_ptype	on return, the permission type. This is currently always "user", -unless the entry is invalid, in which case it returns "invalid".
out_pitem	on return, the permission item (formatted according to `ptype` -, see -“permissions” for more detail
out_detail	on return, the permission detail (at this time, always `NULL`)

Returns

TRUE if a permission was returned, FALSE if idx -was invalid

nm_setting_connection_get_zone ()

const char *
-nm_setting_connection_get_zone (NMSettingConnection *setting);

Returns the “zone” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the trust level of a connection

nm_setting_connection_permissions_user_allowed ()

gboolean
-nm_setting_connection_permissions_user_allowed
-                               (NMSettingConnection *setting,
-                                const char *uname);

Checks whether the given username is allowed to view/access this connection.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
uname	the user name to check permissions for

Returns

TRUE if the requested user is allowed to view this connection, -FALSE if the given user is not allowed to view this connection

nm_setting_connection_add_permission ()

gboolean
-nm_setting_connection_add_permission (NMSettingConnection *setting,
-                                      const char *ptype,
-                                      const char *pitem,
-                                      const char *detail);

Adds a permission to the connection's permission list. At this time, only -the "user" permission type is supported, and pitem - must be a username. See -“permissions”: for more details.

Parameters

----- - - - - - - - - - - - - - - - - - - - - - - -

setting	the NMSettingConnection
ptype	the permission type; at this time only "user" is supported
pitem	the permission item formatted as required for `ptype` -
detail	unused at this time; must be `NULL`.	[nullable]

Returns

TRUE if the permission was unique and was successfully added to the -list, FALSE if ptype -or pitem -was invalid. -If the permission was already present in the list, it will not be added -a second time but TRUE will be returned. Note that before 1.28, in this -case FALSE would be returned.

nm_setting_connection_remove_permission ()

void
-nm_setting_connection_remove_permission
-                               (NMSettingConnection *setting,
-                                guint32 idx);

Removes the permission at index idx - from the connection.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
idx	the zero-based index of the permission to remove

nm_setting_connection_remove_permission_by_value ()

gboolean
-nm_setting_connection_remove_permission_by_value
-                               (NMSettingConnection *setting,
-                                const char *ptype,
-                                const char *pitem,
-                                const char *detail);

Removes the permission from the connection. -At this time, only the "user" permission type is supported, and pitem - must -be a username. See “permissions”: for more details.

Parameters

----- - - - - - - - - - - - - - - - - - - - - - - -

setting	the NMSettingConnection
ptype	the permission type; at this time only "user" is supported
pitem	the permission item formatted as required for `ptype` -
detail	unused at this time; must be `NULL`.	[nullable]

Returns

TRUE if the permission was found and removed; FALSE if it was not.

nm_setting_connection_get_master ()

const char *
-nm_setting_connection_get_master (NMSettingConnection *setting);

nm_setting_connection_get_master has been deprecated since version 1.46. and should not be used in newly-written code.

Use nm_setting_connection_get_master() instead which -is just an alias.

Returns the “master” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

interface name of the controller device or UUID of the controller -connection.

nm_setting_connection_get_controller ()

const char *
-nm_setting_connection_get_controller (NMSettingConnection *setting);

Returns the “controller” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

interface name of the controller device or UUID of the controller -connection.

Since: 1.46

nm_setting_connection_is_slave_type ()

gboolean
-nm_setting_connection_is_slave_type (NMSettingConnection *setting,
-                                     const char *type);

nm_setting_connection_is_slave_type has been deprecated since version 1.46. and should not be used in newly-written code.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
type	the setting name (ie NM_SETTING_BOND_SETTING_NAME) to be matched -against `setting` -'s port type

Returns

TRUE if connection is of the given port type -

nm_setting_connection_get_slave_type ()

const char *
-nm_setting_connection_get_slave_type (NMSettingConnection *setting);

nm_setting_connection_get_slave_type has been deprecated since version 1.46. and should not be used in newly-written code.

Use nm_setting_connection_get_port_type() instead which -is just an alias.

Returns the “slave-type” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the type of port this connection is, if any

nm_setting_connection_get_port_type ()

const char *
-nm_setting_connection_get_port_type (NMSettingConnection *setting);

Returns the “port-type” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the type of port this connection is, if any.

Since: 1.46

nm_setting_connection_get_autoconnect_slaves ()

NMSettingConnectionAutoconnectSlaves
-nm_setting_connection_get_autoconnect_slaves
-                               (NMSettingConnection *setting);

nm_setting_connection_get_autoconnect_slaves has been deprecated since version 1.46. and should not be used in newly-written code.

Use nm_setting_connection_get_autoconnect_ports() instead, this -is just an alias.

Returns the “autoconnect-slaves” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

whether ports of the connection should be activated together -with the connection.

Since: 1.2

nm_setting_connection_get_autoconnect_ports ()

NMTernary
-nm_setting_connection_get_autoconnect_ports
-                               (NMSettingConnection *setting);

Returns the “autoconnect-ports” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

whether ports of the connection should be activated together -with the connection.

Since: 1.46

nm_setting_connection_get_num_secondaries ()

guint32
-nm_setting_connection_get_num_secondaries
-                               (NMSettingConnection *setting);

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the number of configured secondary connection UUIDs

nm_setting_connection_get_secondary ()

const char *
-nm_setting_connection_get_secondary (NMSettingConnection *setting,
-                                     guint32 idx);

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
idx	the zero-based index of the secondary connection UUID entry. -Access one past the length of secondaries is ok and will return -`NULL`. Otherwise, it is a user error.

Returns

the secondary connection UUID at index idx -or -NULL if idx -is the number of secondaries.

nm_setting_connection_add_secondary ()

gboolean
-nm_setting_connection_add_secondary (NMSettingConnection *setting,
-                                     const char *sec_uuid);

Adds a new secondary connection UUID to the setting.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
sec_uuid	the secondary connection UUID to add

Returns

TRUE if the secondary connection UUID was added; FALSE if the UUID -was already present

nm_setting_connection_remove_secondary ()

void
-nm_setting_connection_remove_secondary
-                               (NMSettingConnection *setting,
-                                guint32 idx);

Removes the secondary connection UUID at index idx -.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
idx	index number of the secondary connection UUID

nm_setting_connection_remove_secondary_by_value ()

gboolean
-nm_setting_connection_remove_secondary_by_value
-                               (NMSettingConnection *setting,
-                                const char *sec_uuid);

Removes the secondary connection UUID sec_uuid -.

Parameters

----- - - - - - - - - - - - - -

setting	the NMSettingConnection
sec_uuid	the secondary connection UUID to remove

Returns

TRUE if the secondary connection UUID was found and removed; FALSE if it was not.

nm_setting_connection_get_gateway_ping_timeout ()

guint32
-nm_setting_connection_get_gateway_ping_timeout
-                               (NMSettingConnection *setting);

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the value contained in the “gateway-ping-timeout” -property.

nm_setting_connection_get_metered ()

NMMetered
-nm_setting_connection_get_metered (NMSettingConnection *setting);

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

the “metered” property of the setting.

Since: 1.2

nm_setting_connection_get_lldp ()

NMSettingConnectionLldp
-nm_setting_connection_get_lldp (NMSettingConnection *setting);

Returns the “lldp” property of the connection.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

a NMSettingConnectionLldp which indicates whether LLDP must be -enabled for the connection.

Since: 1.2

nm_setting_connection_get_auth_retries ()

int
-nm_setting_connection_get_auth_retries
-                               (NMSettingConnection *setting);

NMSettingConnectionDownOnPoweroff
-nm_setting_connection_get_down_on_poweroff
-                               (NMSettingConnection *setting);

Returns the NM_SETTING_CONNECTION_DOWN_ON_POWEROFF property.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Returns

whether the connection will be brought down before the system -is powered off.

Since: 1.48

nm_setting_connection_get_mud_url ()

const char *
-nm_setting_connection_get_mud_url (NMSettingConnection *setting);

Returns the value contained in the “mud-url” -property.

Parameters

----- - - - - - -

setting

the NMSettingConnection

Since: 1.26

Types and Values

NM_SETTING_CONNECTION_SETTING_NAME

#define NM_SETTING_CONNECTION_SETTING_NAME "connection"
-

NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MIN

#define NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MIN     -999
-

NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MAX

#define NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_MAX     999
-

NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_DEFAULT

#define NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY_DEFAULT 0
-

NM_SETTING_CONNECTION_ID

#define NM_SETTING_CONNECTION_ID                    "id"
-

NM_SETTING_CONNECTION_UUID

#define NM_SETTING_CONNECTION_UUID                  "uuid"
-

NM_SETTING_CONNECTION_STABLE_ID

#define NM_SETTING_CONNECTION_STABLE_ID             "stable-id"
-

NM_SETTING_CONNECTION_INTERFACE_NAME

#define NM_SETTING_CONNECTION_INTERFACE_NAME        "interface-name"
-

NM_SETTING_CONNECTION_TYPE

#define NM_SETTING_CONNECTION_TYPE                  "type"
-

NM_SETTING_CONNECTION_AUTOCONNECT

#define NM_SETTING_CONNECTION_AUTOCONNECT           "autoconnect"
-

NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY

#define NM_SETTING_CONNECTION_AUTOCONNECT_PRIORITY  "autoconnect-priority"
-

NM_SETTING_CONNECTION_AUTOCONNECT_RETRIES

#define NM_SETTING_CONNECTION_AUTOCONNECT_RETRIES   "autoconnect-retries"
-

NM_SETTING_CONNECTION_MULTI_CONNECT

#define NM_SETTING_CONNECTION_MULTI_CONNECT         "multi-connect"
-

NM_SETTING_CONNECTION_TIMESTAMP

#define NM_SETTING_CONNECTION_TIMESTAMP             "timestamp"
-

NM_SETTING_CONNECTION_READ_ONLY

#define NM_SETTING_CONNECTION_READ_ONLY             "read-only"
-

NM_SETTING_CONNECTION_PERMISSIONS

#define NM_SETTING_CONNECTION_PERMISSIONS           "permissions"
-

NM_SETTING_CONNECTION_ZONE

#define NM_SETTING_CONNECTION_ZONE                  "zone"
-

NM_SETTING_CONNECTION_MASTER

#define NM_SETTING_CONNECTION_MASTER                "master"
-

NM_SETTING_CONNECTION_CONTROLLER

#define NM_SETTING_CONNECTION_CONTROLLER            "controller"
-

NM_SETTING_CONNECTION_SLAVE_TYPE

#define NM_SETTING_CONNECTION_SLAVE_TYPE            "slave-type"
-

NM_SETTING_CONNECTION_PORT_TYPE

#define NM_SETTING_CONNECTION_PORT_TYPE             "port-type"
-

NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES

#define NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES    "autoconnect-slaves"
-

NM_SETTING_CONNECTION_AUTOCONNECT_PORTS

#define NM_SETTING_CONNECTION_AUTOCONNECT_PORTS     "autoconnect-ports"
-

NM_SETTING_CONNECTION_SECONDARIES

#define NM_SETTING_CONNECTION_SECONDARIES           "secondaries"
-

NM_SETTING_CONNECTION_GATEWAY_PING_TIMEOUT

#define NM_SETTING_CONNECTION_GATEWAY_PING_TIMEOUT  "gateway-ping-timeout"
-

NM_SETTING_CONNECTION_METERED

#define NM_SETTING_CONNECTION_METERED               "metered"
-

NM_SETTING_CONNECTION_LLDP

#define NM_SETTING_CONNECTION_LLDP                  "lldp"
-

NM_SETTING_CONNECTION_AUTH_RETRIES

#define NM_SETTING_CONNECTION_AUTH_RETRIES          "auth-retries"
-

NM_SETTING_CONNECTION_MDNS

#define NM_SETTING_CONNECTION_MDNS                  "mdns"
-

NM_SETTING_CONNECTION_LLMNR

#define NM_SETTING_CONNECTION_LLMNR                 "llmnr"
-

NM_SETTING_CONNECTION_DNS_OVER_TLS

#define NM_SETTING_CONNECTION_DNS_OVER_TLS          "dns-over-tls"
-

NM_SETTING_CONNECTION_MPTCP_FLAGS

#define NM_SETTING_CONNECTION_MPTCP_FLAGS           "mptcp-flags"
-

NM_SETTING_CONNECTION_WAIT_DEVICE_TIMEOUT

#define NM_SETTING_CONNECTION_WAIT_DEVICE_TIMEOUT   "wait-device-timeout"
-

NM_SETTING_CONNECTION_MUD_URL

#define NM_SETTING_CONNECTION_MUD_URL               "mud-url"
-

NM_SETTING_CONNECTION_WAIT_ACTIVATION_DELAY

#define NM_SETTING_CONNECTION_WAIT_ACTIVATION_DELAY "wait-activation-delay"
-

NM_SETTING_CONNECTION_DOWN_ON_POWEROFF

#define NM_SETTING_CONNECTION_DOWN_ON_POWEROFF      "down-on-poweroff"
-

enum NMSettingConnectionAutoconnectSlaves

NMSettingConnectionAutoconnectSlaves has been deprecated since version 1.46 and should not be used in newly-written code.

NMSettingConnectionAutoconnectSlaves values indicate whether slave connections -should be activated when controller is activated.

Members

----- - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES_DEFAULT	- default value -
NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES_NO	- slaves are not brought up when -controller is activated -
NM_SETTING_CONNECTION_AUTOCONNECT_SLAVES_YES	- slaves are brought up when -controller is activated -

Since: 1.2

enum NMSettingConnectionLldp

NMSettingConnectionLldp values indicate whether LLDP should be enabled.

Members

----- - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_LLDP_DEFAULT	- default value -
NM_SETTING_CONNECTION_LLDP_DISABLE	- disable LLDP -
NM_SETTING_CONNECTION_LLDP_ENABLE_RX	- enable reception of LLDP frames -

Since: 1.2

enum NMSettingConnectionMdns

NMSettingConnectionMdns values indicate whether mDNS should be enabled.

Members

----- - - - - - - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_MDNS_DEFAULT	- default value -
NM_SETTING_CONNECTION_MDNS_NO	- disable mDNS -
NM_SETTING_CONNECTION_MDNS_RESOLVE	- support only resolving, do not register hostname -
NM_SETTING_CONNECTION_MDNS_YES	- enable mDNS -

Since: 1.12

enum NMSettingConnectionLlmnr

NMSettingConnectionLlmnr values indicate whether LLMNR should be enabled.

Members

----- - - - - - - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_LLMNR_DEFAULT	- default value -
NM_SETTING_CONNECTION_LLMNR_NO	- disable LLMNR -
NM_SETTING_CONNECTION_LLMNR_RESOLVE	- support only resolving, do not register hostname -
NM_SETTING_CONNECTION_LLMNR_YES	- enable LLMNR -

Since: 1.14

enum NMSettingConnectionDnsOverTls

NMSettingConnectionDnsOverTls values indicate whether DNSOverTls should be enabled.

Members

----- - - - - - - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_DNS_OVER_TLS_DEFAULT	- default value -
NM_SETTING_CONNECTION_DNS_OVER_TLS_NO	- disable DNSOverTls -
NM_SETTING_CONNECTION_DNS_OVER_TLS_OPPORTUNISTIC	- enable opportunistic mode -
NM_SETTING_CONNECTION_DNS_OVER_TLS_YES	- enable strict mode -

Since: 1.34

enum NMSettingConnectionDownOnPoweroff

NMSettingConnectionDownOnPoweroff indicates whether the connection will be -brought down before the system is powered off.

Members

----- - - - - - - - - - - - - - - - - - -

NM_SETTING_CONNECTION_DOWN_ON_POWEROFF_DEFAULT	- default value -
NM_SETTING_CONNECTION_DOWN_ON_POWEROFF_NO	- disable down-on-poweroff -
NM_SETTING_CONNECTION_DOWN_ON_POWEROFF_YES	- enable down-on-poweroff -

Since: 1.48