Adds an allowed EAP method. The setting is not valid until at least one -EAP method has been added. See “eap” property for a list of +EAP method has been added. See “eap” property for a list of allowed EAP methods.

Parameters

@@ -1259,7 +1259,7 @@ nm_setting_802_1x_get_anonymous_identity (NMSetting8021x *setting);

Returns the anonymous identifier used by some EAP methods (like TTLS) to authenticate the user in the outer unencrypted "phase 1" authentication. The -inner "phase 2" authentication will use the “identity” in +inner "phase 2" authentication will use the “identity” in a secure form, if applicable for that EAP method.

Parameters

@@ -1312,9 +1312,9 @@ nm_setting_802_1x_get_pac_file (nm_setting_802_1x_get_system_ca_certs () gboolean nm_setting_802_1x_get_system_ca_certs (NMSetting8021x *setting); -Sets the “system-ca-certs” property. The -“ca-path” and “phase2-ca-path” -properties are ignored if the “system-ca-certs” property is + Sets the “system-ca-certs” property. The +“ca-path” and “phase2-ca-path” +properties are ignored if the “system-ca-certs” property is TRUE, in which case a system-wide CA certificate directory specified at compile time (using the --system-ca-path configure option) is used in place of these properties. @@ -1346,7 +1346,7 @@ nm_setting_802_1x_get_ca_path (Returns the path of the CA certificate directory if previously set. Systems will often have a directory that contains multiple individual CA certificates which the supplicant can then add to the verification chain. This may be -used in addition to the “ca-cert” property to add more CA +used in addition to the “ca-cert” property to add more CA certificates for verifying the network to client. Parameters @@ -1376,7 +1376,7 @@ nm_setting_802_1x_get_phase2_ca_path (“phase2-ca-cert” property +This may be used in addition to the “phase2-ca-cert” property to add more CA certificates for verifying the network to client. Parameters @@ -1456,7 +1456,7 @@ of the network cannot be confirmed by the client. Returns the CA certificate data. -[transfer none] +[transfer none] @@ -1531,7 +1531,7 @@ nm_setting_802_1x_set_ca_cert (NMSetting8021xCKScheme scheme, NMSetting8021xCKFormat *out_format, GError **error); -Reads a certificate from disk and sets the “ca-cert” property + Reads a certificate from disk and sets the “ca-cert” property with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. @@ -1606,7 +1606,7 @@ nm_setting_802_1x_get_ca_cert_password Returns the password used to access the CA certificate stored in -“ca-cert” property. Only makes sense if the certificate +“ca-cert” property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. Since: 1.8 @@ -1635,7 +1635,7 @@ nm_setting_802_1x_get_ca_cert_password_flags Returns the NMSettingSecretFlags pertaining to the -“ca-cert-password” +“ca-cert-password” Since: 1.8 @@ -1661,7 +1661,7 @@ nm_setting_802_1x_get_subject_match ( Returns - the “subject-match” property. This is the + the “subject-match” property. This is the substring to be matched against the subject of the authentication server certificate, or NULL no subject verification is to be performed. @@ -1674,7 +1674,7 @@ performed. nm_setting_802_1x_get_num_altsubject_matches (NMSetting8021x *setting); Returns the number of entries in the -“altsubject-matches” property of this setting. +“altsubject-matches” property of this setting. Parameters @@ -1884,7 +1884,7 @@ nm_setting_802_1x_get_domain_suffix_match Returns - the “domain-suffix-match” property. + the “domain-suffix-match” property. Since: 1.2 @@ -1910,7 +1910,7 @@ nm_setting_802_1x_get_domain_match ( Returns - the “domain-match” property. + the “domain-match” property. Since: 1.24 @@ -1971,7 +1971,7 @@ authentication method. Returns the client certificate data. -[transfer none] +[transfer none] @@ -2044,7 +2044,7 @@ nm_setting_802_1x_set_client_cert (NMSetting8021xCKScheme scheme, NMSetting8021xCKFormat *out_format, GError **error); -Reads a certificate from disk and sets the “client-cert” + Reads a certificate from disk and sets the “client-cert” property with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. @@ -2123,7 +2123,7 @@ nm_setting_802_1x_get_client_cert_password Returns the password used to access the client certificate stored in -“client-cert” property. Only makes sense if the certificate +“client-cert” property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. Since: 1.8 @@ -2152,7 +2152,7 @@ nm_setting_802_1x_get_client_cert_password_flags Returns the NMSettingSecretFlags pertaining to the -“client-cert-password” +“client-cert-password” Since: 1.8 @@ -2179,7 +2179,7 @@ nm_setting_802_1x_get_phase1_peapver ( Returns the "phase 1" PEAP version to be used when authenticating with -EAP-PEAP as contained in the “phase1-peapver” property. Valid +EAP-PEAP as contained in the “phase1-peapver” property. Valid values are NULL (unset), "0" (PEAP version 0), and "1" (PEAP version 1). @@ -2208,7 +2208,7 @@ nm_setting_802_1x_get_phase1_peaplabel Returns whether the "phase 1" PEAP label is new-style or old-style, to be used when authenticating with EAP-PEAP, as contained in the -“phase1-peaplabel” property. Valid values are NULL (unset), +“phase1-peaplabel” property. Valid values are NULL (unset), "0" (use old-style label), and "1" (use new-style label). See the wpa_supplicant documentation for more details. @@ -2237,7 +2237,7 @@ nm_setting_802_1x_get_phase1_fast_provisioning Returns whether "phase 1" PEAP fast provisioning should be used, as specified -by the “phase1-fast-provisioning” property. See the +by the “phase1-fast-provisioning” property. See the wpa_supplicant documentation for more details. @@ -2264,7 +2264,7 @@ nm_setting_802_1x_get_phase2_auth ( Returns the "phase 2" non-EAP (ex MD5) allowed authentication method as -specified by the “phase2-auth” property. +specified by the “phase2-auth” property. @@ -2290,7 +2290,7 @@ nm_setting_802_1x_get_phase2_autheap ( Returns the "phase 2" EAP-based (ex TLS) allowed authentication method as -specified by the “phase2-autheap” property. +specified by the “phase2-autheap” property. @@ -2354,7 +2354,7 @@ of the network cannot be confirmed by the client. Returns the "phase 2" CA certificate data. -[transfer none] +[transfer none] @@ -2431,7 +2431,7 @@ nm_setting_802_1x_set_phase2_ca_cert (NMSetting8021xCKScheme scheme, NMSetting8021xCKFormat *out_format, GError **error); -Reads a certificate from disk and sets the “phase2-ca-cert” + Reads a certificate from disk and sets the “phase2-ca-cert” property with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. @@ -2506,7 +2506,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password Returns the password used to access the "phase2" CA certificate stored in -“phase2-ca-cert” property. Only makes sense if the certificate +“phase2-ca-cert” property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. Since: 1.8 @@ -2535,7 +2535,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password_flags Returns the NMSettingSecretFlags pertaining to the -“phase2-private-key-password” +“phase2-private-key-password” Since: 1.8 @@ -2562,7 +2562,7 @@ nm_setting_802_1x_get_phase2_subject_match Returns - the “phase2-subject-match” property. This is + the “phase2-subject-match” property. This is the substring to be matched against the subject of the "phase 2" authentication server certificate, or NULL no subject verification is to be performed. @@ -2575,7 +2575,7 @@ is to be performed. nm_setting_802_1x_get_num_phase2_altsubject_matches (NMSetting8021x *setting); Returns the number of entries in the -“phase2-altsubject-matches” property of this setting. +“phase2-altsubject-matches” property of this setting. Parameters @@ -2786,7 +2786,7 @@ nm_setting_802_1x_get_phase2_domain_suffix_match Returns - the “phase2-domain-suffix-match” property. + the “phase2-domain-suffix-match” property. Since: 1.2 @@ -2813,7 +2813,7 @@ nm_setting_802_1x_get_phase2_domain_match Returns - the “phase2-domain-match” property. + the “phase2-domain-match” property. Since: 1.24 @@ -2877,7 +2877,7 @@ authentication method. Returns the "phase 2" client certificate data. -[transfer none] +[transfer none] @@ -2952,7 +2952,7 @@ nm_setting_802_1x_set_phase2_client_cert NMSetting8021xCKScheme scheme, NMSetting8021xCKFormat *out_format, GError **error); -Reads a certificate from disk and sets the “phase2-client-cert” + Reads a certificate from disk and sets the “phase2-client-cert” property with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. @@ -3031,7 +3031,7 @@ nm_setting_802_1x_get_phase2_client_cert_password Returns the password used to access the "phase2" client certificate stored in -“phase2-client-cert” property. Only makes sense if the certificate +“phase2-client-cert” property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. Since: 1.8 @@ -3060,7 +3060,7 @@ nm_setting_802_1x_get_phase2_client_cert_password_flags Returns the NMSettingSecretFlags pertaining to the -“phase2-client-cert-password” +“phase2-client-cert-password” Since: 1.8 @@ -3087,7 +3087,7 @@ nm_setting_802_1x_get_password ( Returns the password used by the authentication method, if any, as specified -by the “password” property +by the “password” property @@ -3112,7 +3112,7 @@ nm_setting_802_1x_get_password_flags ( Returns - the NMSettingSecretFlags pertaining to the “password” + the NMSettingSecretFlags pertaining to the “password” @@ -3139,8 +3139,8 @@ nm_setting_802_1x_get_password_raw (Returns the password used by the authentication method as a UTF-8-encoded array of bytes, as specified by the -“password-raw” property. -[transfer none] +“password-raw” property. +[transfer none] @@ -3167,7 +3167,7 @@ nm_setting_802_1x_get_password_raw_flags Returns the NMSettingSecretFlags pertaining to the -“password-raw” +“password-raw” @@ -3193,7 +3193,7 @@ nm_setting_802_1x_get_pin ( Returns the PIN used by the authentication method, if any, as specified -by the “pin” property +by the “pin” property @@ -3219,7 +3219,7 @@ nm_setting_802_1x_get_pin_flags ( Returns the NMSettingSecretFlags pertaining to the -“pin” +“pin” @@ -3285,7 +3285,7 @@ keys should always be encrypted with a private key password. Returns the private key data. -[transfer none] +[transfer none] @@ -3363,14 +3363,14 @@ nm_setting_802_1x_set_private_key ( This function reads a private key from disk and sets the -“private-key” property with the private key file data if using +“private-key” property with the private key file data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the private key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. If password is given, this function attempts to decrypt the private key to verify that password is correct, and if it is, updates the -“private-key-password” property with the given password +“private-key-password” property with the given password . If the decryption is unsuccessful, FALSE is returned, error is set, and no @@ -3461,7 +3461,7 @@ nm_setting_802_1x_get_private_key_password Returns the private key password used to decrypt the private key if previously set with nm_setting_802_1x_set_private_key(), or the -“private-key-password” property. +“private-key-password” property. @@ -3488,7 +3488,7 @@ nm_setting_802_1x_get_private_key_password_flags Returns the NMSettingSecretFlags pertaining to the -“private-key-password” +“private-key-password” @@ -3515,7 +3515,7 @@ nm_setting_802_1x_get_private_key_format Returns the data format of the private key data stored in the -“private-key” property +“private-key” property @@ -3581,7 +3581,7 @@ keys should always be encrypted with a private key password. Returns the "phase 2" private key data. -[transfer none] +[transfer none] @@ -3661,14 +3661,14 @@ nm_setting_802_1x_set_phase2_private_key when EAP-TLS is used as either the "phase 1" or "phase 2" 802.1x authentication method. This function reads a private key from disk and sets the -“phase2-private-key” property with the private key file data if +“phase2-private-key” property with the private key file data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the private key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme. If password is given, this function attempts to decrypt the private key to verify that password is correct, and if it is, updates the -“phase2-private-key-password” property with the given +“phase2-private-key-password” property with the given password . If the decryption is unsuccessful, FALSE is returned, error is @@ -3760,7 +3760,7 @@ nm_setting_802_1x_get_phase2_private_key_password Returns the private key password used to decrypt the private key if previously set with nm_setting_802_1x_set_phase2_private_key() or the -“phase2-private-key-password” property. +“phase2-private-key-password” property. @@ -3787,7 +3787,7 @@ nm_setting_802_1x_get_phase2_private_key_password_flags Returns the NMSettingSecretFlags pertaining to the -“phase2-private-key-password” +“phase2-private-key-password” @@ -3814,7 +3814,7 @@ nm_setting_802_1x_get_phase2_private_key_format Returns the data format of the "phase 2" private key data stored in the -“phase2-private-key” property +“phase2-private-key” property @@ -3849,7 +3849,7 @@ nm_setting_802_1x_get_phase1_auth_flags nm_setting_802_1x_get_auth_timeout () int nm_setting_802_1x_get_auth_timeout (NMSetting8021x *setting); -Returns the value contained in the “auth-timeout” property. +Returns the value contained in the “auth-timeout” property. Parameters @@ -3877,7 +3877,7 @@ global default value. nm_setting_802_1x_get_optional () gboolean nm_setting_802_1x_get_optional (NMSetting8021x *setting); -Returns the value contained in the “optional” property. +Returns the value contained in the “optional” property. Parameters @@ -4360,6 +4360,6 @@ type. - Generated by GTK-Doc V1.33.1 +Generated by GTK-Doc V1.33.0 \ No newline at end of file -- cgit 1.3.0-6-gf8a5