@@ -1392,7 +1106,7 @@ nm_setting_802_1x_get_eap_method (NMSetting8021x *setting
,
                                   const char *eap);
 Adds an allowed EAP method.  The setting is not valid until at least one
-EAP method has been added.  See “eap” property for a list of
+EAP method has been added.  See “eap” property for a list of
 allowed EAP methods.
 
 Parameters
@@ -1545,7 +1259,7 @@ nm_setting_802_1x_get_anonymous_identity
                                (NMSetting8021x *setting);
 Returns the anonymous identifier used by some EAP methods (like TTLS) to
 authenticate the user in the outer unencrypted "phase 1" authentication.  The
-inner "phase 2" authentication will use the “identity” in
+inner "phase 2" authentication will use the “identity” in
 a secure form, if applicable for that EAP method.
 
 Parameters
@@ -1598,9 +1312,9 @@ nm_setting_802_1x_get_pac_file (nm_setting_802_1x_get_system_ca_certs ()
 gboolean
 nm_setting_802_1x_get_system_ca_certs (NMSetting8021x *setting);
-Sets the “system-ca-certs” property. The
-“ca-path” and “phase2-ca-path”
-properties are ignored if the “system-ca-certs” property is
+
Sets the “system-ca-certs” property. The
+“ca-path” and “phase2-ca-path”
+properties are ignored if the “system-ca-certs” property is
 TRUE, in which case a system-wide CA certificate directory specified at
 compile time (using the --system-ca-path configure option) is used in place
 of these properties.
@@ -1632,7 +1346,7 @@ nm_setting_802_1x_get_ca_path (Returns the path of the CA certificate directory if previously set.  Systems
 will often have a directory that contains multiple individual CA certificates
 which the supplicant can then add to the verification chain.  This may be
-used in addition to the “ca-cert” property to add more CA
+used in addition to the “ca-cert” property to add more CA
 certificates for verifying the network to client.
 
 Parameters
@@ -1662,7 +1376,7 @@ nm_setting_802_1x_get_phase2_ca_path (“phase2-ca-cert” property
+This may be used in addition to the “phase2-ca-cert” property
 to add more CA certificates for verifying the network to client.
 
 Parameters
@@ -1817,7 +1531,7 @@ nm_setting_802_1x_set_ca_cert (NMSetting8021xCKScheme scheme,
                                NMSetting8021xCKFormat *out_format,
                                GError **error);
-Reads a certificate from disk and sets the “ca-cert” property
+
Reads a certificate from disk and sets the “ca-cert” property
 with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB
 scheme, or with the path to the certificate file if using the
 NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -1892,7 +1606,7 @@ nm_setting_802_1x_get_ca_cert_password
 
 Returns
  the password used to access the CA certificate stored in
-“ca-cert” property. Only makes sense if the certificate
+“ca-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -1921,7 +1635,7 @@ nm_setting_802_1x_get_ca_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“ca-cert-password”
+“ca-cert-password”
 
 Since: 1.8
 

@@ -1947,7 +1661,7 @@ nm_setting_802_1x_get_subject_match (
 
 Returns
- the “subject-match” property. This is the
+
 the “subject-match” property. This is the
 substring to be matched against the subject of the authentication
 server certificate, or NULL no subject verification is to be
 performed.
@@ -1960,7 +1674,7 @@ performed.
 nm_setting_802_1x_get_num_altsubject_matches
                                (NMSetting8021x *setting);
 Returns the number of entries in the
-“altsubject-matches” property of this setting.
+“altsubject-matches” property of this setting.
 
 Parameters
 
@@ -2170,7 +1884,7 @@ nm_setting_802_1x_get_domain_suffix_match
 
 Returns
- the “domain-suffix-match” property.
+ the “domain-suffix-match” property.
 
Since: 1.2
@@ -2196,7 +1910,7 @@ nm_setting_802_1x_get_domain_match (
 
 Returns
- the “domain-match” property.
+ the “domain-match” property.
 
 Since: 1.24
 
@@ -2330,7 +2044,7 @@ nm_setting_802_1x_set_client_cert (NMSetting8021xCKScheme scheme,
                                    NMSetting8021xCKFormat *out_format,
                                    GError **error);
-Reads a certificate from disk and sets the “client-cert”
+
Reads a certificate from disk and sets the “client-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -2409,7 +2123,7 @@ nm_setting_802_1x_get_client_cert_password
 
 Returns
  the password used to access the client certificate stored in
-“client-cert” property. Only makes sense if the certificate
+“client-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -2438,7 +2152,7 @@ nm_setting_802_1x_get_client_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“client-cert-password”
+“client-cert-password”
 
 Since: 1.8
 
@@ -2465,7 +2179,7 @@ nm_setting_802_1x_get_phase1_peapver (
 Returns
  the "phase 1" PEAP version to be used when authenticating with
-EAP-PEAP as contained in the “phase1-peapver” property.  Valid
+EAP-PEAP as contained in the “phase1-peapver” property.  Valid
 values are NULL (unset), "0" (PEAP version 0), and "1" (PEAP version 1).
 
 
@@ -2494,7 +2208,7 @@ nm_setting_802_1x_get_phase1_peaplabel
 Returns
  whether the "phase 1" PEAP label is new-style or old-style, to be
 used when authenticating with EAP-PEAP, as contained in the
-“phase1-peaplabel” property.  Valid values are NULL (unset),
+“phase1-peaplabel” property.  Valid values are NULL (unset),
 "0" (use old-style label), and "1" (use new-style label).  See the
 wpa_supplicant documentation for more details.
 
@@ -2523,7 +2237,7 @@ nm_setting_802_1x_get_phase1_fast_provisioning
 
 Returns
  whether "phase 1" PEAP fast provisioning should be used, as specified
-by the “phase1-fast-provisioning” property.  See the
+by the “phase1-fast-provisioning” property.  See the
 wpa_supplicant documentation for more details.
 
 
@@ -2550,7 +2264,7 @@ nm_setting_802_1x_get_phase2_auth (
 Returns
  the "phase 2" non-EAP (ex MD5) allowed authentication method as
-specified by the “phase2-auth” property.
+specified by the “phase2-auth” property.
 
 
 
@@ -2576,7 +2290,7 @@ nm_setting_802_1x_get_phase2_autheap (
 Returns
  the "phase 2" EAP-based (ex TLS) allowed authentication method as
-specified by the “phase2-autheap” property.
+specified by the “phase2-autheap” property.
 
 
 
@@ -2717,7 +2431,7 @@ nm_setting_802_1x_set_phase2_ca_cert (NMSetting8021xCKScheme scheme,
                                       NMSetting8021xCKFormat *out_format,
                                       GError **error);
-Reads a certificate from disk and sets the “phase2-ca-cert”
+
Reads a certificate from disk and sets the “phase2-ca-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -2792,7 +2506,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password
 
 Returns
  the password used to access the "phase2" CA certificate stored in
-“phase2-ca-cert” property. Only makes sense if the certificate
+“phase2-ca-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -2821,7 +2535,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-private-key-password”
+“phase2-private-key-password”
 
 Since: 1.8
 
@@ -2848,7 +2562,7 @@ nm_setting_802_1x_get_phase2_subject_match
 
 
 Returns
- the “phase2-subject-match” property. This is
+
 the “phase2-subject-match” property. This is
 the substring to be matched against the subject of the "phase 2"
 authentication server certificate, or NULL no subject verification
 is to be performed.
@@ -2861,7 +2575,7 @@ is to be performed.
 nm_setting_802_1x_get_num_phase2_altsubject_matches
                                (NMSetting8021x *setting);
 Returns the number of entries in the
-“phase2-altsubject-matches” property of this setting.
+“phase2-altsubject-matches” property of this setting.
 
 Parameters
 
 
 
 

@@ -3072,7 +2786,7 @@ nm_setting_802_1x_get_phase2_domain_suffix_match
 
 
 Returns
- the “phase2-domain-suffix-match” property.
+ the “phase2-domain-suffix-match” property.
 
 Since: 1.2
 
@@ -3099,7 +2813,7 @@ nm_setting_802_1x_get_phase2_domain_match
 
 
 Returns
- the “phase2-domain-match” property.
+ the “phase2-domain-match” property.
 
 Since: 1.24
 
@@ -3238,7 +2952,7 @@ nm_setting_802_1x_set_phase2_client_cert
                                 NMSetting8021xCKScheme scheme,
                                 NMSetting8021xCKFormat *out_format,
                                 GError **error);
-Reads a certificate from disk and sets the “phase2-client-cert”
+
Reads a certificate from disk and sets the “phase2-client-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -3317,7 +3031,7 @@ nm_setting_802_1x_get_phase2_client_cert_password
 
 Returns
  the password used to access the "phase2" client certificate stored in
-“phase2-client-cert” property. Only makes sense if the certificate
+“phase2-client-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -3346,7 +3060,7 @@ nm_setting_802_1x_get_phase2_client_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-client-cert-password”
+“phase2-client-cert-password”
 
 Since: 1.8
 
@@ -3373,7 +3087,7 @@ nm_setting_802_1x_get_password (
 Returns
  the password used by the authentication method, if any, as specified
-by the “password” property
+by the “password” property
 
 
 
@@ -3398,7 +3112,7 @@ nm_setting_802_1x_get_password_flags (
 Returns
- the NMSettingSecretFlags pertaining to the “password”
+ the NMSettingSecretFlags pertaining to the “password”
 
 
 
@@ -3425,7 +3139,7 @@ nm_setting_802_1x_get_password_raw (Returns
 the password used by the authentication method as a
 UTF-8-encoded array of bytes, as specified by the
-“password-raw” property. 
+“password-raw” property. 
 [transfer none]
 
 
@@ -3453,7 +3167,7 @@ nm_setting_802_1x_get_password_raw_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“password-raw”
+“password-raw”
 
 
 
@@ -3479,7 +3193,7 @@ nm_setting_802_1x_get_pin (
 Returns
  the PIN used by the authentication method, if any, as specified
-by the “pin” property
+by the “pin” property
 
 
 
@@ -3505,7 +3219,7 @@ nm_setting_802_1x_get_pin_flags (
 Returns
  the NMSettingSecretFlags pertaining to the
-“pin”
+“pin”
 
 
 
@@ -3649,14 +3363,14 @@ nm_setting_802_1x_set_private_key (
 This function reads a private key from disk and sets the
-“private-key” property with the private key file data if using
+“private-key” property with the private key file data if using
 the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the private
 key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
 If password
  is given, this function attempts to decrypt the private key to
 verify that password
  is correct, and if it is, updates the
-“private-key-password” property with the given password
+“private-key-password” property with the given password
 .  If
 the decryption is unsuccessful, FALSE is returned, error
  is set, and no
@@ -3747,7 +3461,7 @@ nm_setting_802_1x_get_private_key_password
 
Returns
  the private key password used to decrypt the private key if
 previously set with nm_setting_802_1x_set_private_key(), or the
-“private-key-password” property.
+“private-key-password” property.
 
 
 
@@ -3774,7 +3488,7 @@ nm_setting_802_1x_get_private_key_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“private-key-password”
+“private-key-password”
 
 
 
@@ -3801,7 +3515,7 @@ nm_setting_802_1x_get_private_key_format
 
 Returns
  the data format of the private key data stored in the
-“private-key” property
+“private-key” property
 
 
 
@@ -3947,14 +3661,14 @@ nm_setting_802_1x_set_phase2_private_key
 when EAP-TLS is used as either the "phase 1" or "phase 2" 802.1x
 authentication method.
 This function reads a private key from disk and sets the
-“phase2-private-key” property with the private key file data if
+“phase2-private-key” property with the private key file data if
 using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the
 private key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
 If password
  is given, this function attempts to decrypt the private key to
 verify that password
  is correct, and if it is, updates the
-“phase2-private-key-password” property with the given
+“phase2-private-key-password” property with the given
 password
 .  If the decryption is unsuccessful, FALSE is returned, error
  is
@@ -4046,7 +3760,7 @@ nm_setting_802_1x_get_phase2_private_key_password
 
Returns
  the private key password used to decrypt the private key if
 previously set with nm_setting_802_1x_set_phase2_private_key() or the
-“phase2-private-key-password” property.
+“phase2-private-key-password” property.
 
 
 
@@ -4073,7 +3787,7 @@ nm_setting_802_1x_get_phase2_private_key_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-private-key-password”
+“phase2-private-key-password”
 
 
 
@@ -4100,7 +3814,7 @@ nm_setting_802_1x_get_phase2_private_key_format
 
 Returns
  the data format of the "phase 2" private key data stored in the
-“phase2-private-key” property
+“phase2-private-key” property
 
 
 
@@ -4135,7 +3849,7 @@ nm_setting_802_1x_get_phase1_auth_flags
 nm_setting_802_1x_get_auth_timeout ()
 int
 nm_setting_802_1x_get_auth_timeout (NMSetting8021x *setting);
-Returns the value contained in the “auth-timeout” property.
+Returns the value contained in the “auth-timeout” property.
 
 Parameters
 

@@ -4163,7 +3877,7 @@ global default value.
 nm_setting_802_1x_get_optional ()
 gboolean
 nm_setting_802_1x_get_optional (NMSetting8021x *setting);
-Returns the value contained in the “optional” property.
+Returns the value contained in the “optional” property.
 
 Parameters
 

@@ -4643,648 +4357,6 @@ type.
 #define NM_SETTING_802_1X_OPTIONAL                          "optional"
 
 
-
-
-NMSetting8021x
-typedef struct _NMSetting8021x NMSetting8021x;
-IEEE 802.1x Authentication Settings
-
-
-
-Property Details
-
-The “altsubject-matches” property
-  “altsubject-matches”       GStrv
-List of strings to be matched against the altSubjectName of the
-certificate presented by the authentication server. If the list is empty,
-no verification of the server certificate's altSubjectName is performed.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “anonymous-identity” property
-  “anonymous-identity”       char *
-Anonymous identity string for EAP authentication methods.  Used as the
-unencrypted identity with EAP types that support different tunneled
-identity like EAP-TTLS.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “auth-timeout” property
-  “auth-timeout”             int
-A timeout for the authentication. Zero means the global default; if the
-global default is not set, the authentication timeout is 25 seconds.
-Owner: NMSetting8021x
-Flags: Read / Write
-Allowed values: >= 0
-Default value: 0
-Since: 1.8
-
-
-
-The “ca-cert” property
-  “ca-cert”                  GBytes *
-Contains the CA certificate if used by the EAP method specified in the
-“eap” property.
-Certificate data is specified using a "scheme"; three are currently
-supported: blob, path and pkcs11 URL. When using the blob scheme this property
-should be set to the certificate's DER encoded data. When using the path
-scheme, this property should be set to the full UTF-8 encoded path of the
-certificate, prefixed with the string "file://" and ending with a terminating
-NUL byte.
-This property can be unset even if the EAP method supports CA certificates,
-but this allows man-in-the-middle attacks and is NOT recommended.
-Note that enabling NMSetting8021x:system-ca-certs will override this
-setting to use the built-in path, if the built-in path is not a directory.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_ca_cert() function instead.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “ca-cert-password” property
-  “ca-cert-password”         char *
-The password used to access the CA certificate stored in
-“ca-cert” property. Only makes sense if the certificate
-is stored on a PKCS#11 token that requires a login.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.8
-
-
-
-The “ca-cert-password-flags” property
-  “ca-cert-password-flags”   NMSettingSecretFlags
-Flags indicating how to handle the “ca-cert-password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-Since: 1.8
-
-
-
-The “ca-path” property
-  “ca-path”                  char *
-UTF-8 encoded path to a directory containing PEM or DER formatted
-certificates to be added to the verification chain in addition to the
-certificate specified in the “ca-cert” property.
-If NMSetting8021x:system-ca-certs is enabled and the built-in CA
-path is an existing directory, then this setting is ignored.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “client-cert” property
-  “client-cert”              GBytes *
-Contains the client certificate if used by the EAP method specified in
-the “eap” property.
-Certificate data is specified using a "scheme"; two are currently
-supported: blob and path. When using the blob scheme (which is backwards
-compatible with NM 0.7.x) this property should be set to the
-certificate's DER encoded data. When using the path scheme, this property
-should be set to the full UTF-8 encoded path of the certificate, prefixed
-with the string "file://" and ending with a terminating NUL byte.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_client_cert() function instead.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “client-cert-password” property
-  “client-cert-password”     char *
-The password used to access the client certificate stored in
-“client-cert” property. Only makes sense if the certificate
-is stored on a PKCS#11 token that requires a login.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.8
-
-
-
-The “client-cert-password-flags” property
-  “client-cert-password-flags” NMSettingSecretFlags
-Flags indicating how to handle the “client-cert-password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-Since: 1.8
-
-
-
-The “domain-match” property
-  “domain-match”             char *
-Constraint for server domain name. If set, this list of FQDNs is used as
-a match requirement for dNSName element(s) of the certificate presented
-by the authentication server.  If a matching dNSName is found, this
-constraint is met.  If no dNSName values are present, this constraint is
-matched against SubjectName CN using the same comparison.
-Multiple valid FQDNs can be passed as a ";" delimited list.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.24
-
-
-
-The “domain-suffix-match” property
-  “domain-suffix-match”      char *
-Constraint for server domain name. If set, this FQDN is used as a suffix
-match requirement for dNSName element(s) of the certificate presented by
-the authentication server.  If a matching dNSName is found, this
-constraint is met.  If no dNSName values are present, this constraint is
-matched against SubjectName CN using same suffix match comparison.
-Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited
-list.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.2
-
-
-
-The “eap” property
-  “eap”                      GStrv
-The allowed EAP method to be used when authenticating to the network with
-802.1x.  Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd",
-and "fast".  Each method requires different configuration using the
-properties of this setting; refer to wpa_supplicant documentation for the
-allowed combinations.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “identity” property
-  “identity”                 char *
-Identity string for EAP authentication methods.  Often the user's user or
-login name.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “optional” property
-  “optional”                 gboolean
-Whether the 802.1X authentication is optional. If TRUE, the activation
-will continue even after a timeout or an authentication failure. Setting
-the property to TRUE is currently allowed only for Ethernet connections.
-If set to FALSE, the activation can continue only after a successful
-authentication.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: FALSE
-Since: 1.22
-
-
-
-The “pac-file” property
-  “pac-file”                 char *
-UTF-8 encoded file path containing PAC for EAP-FAST.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “password” property
-  “password”                 char *
-UTF-8 encoded password used for EAP authentication methods. If both the
-“password” property and the “password-raw”
-property are specified, “password” is preferred.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “password-flags” property
-  “password-flags”           NMSettingSecretFlags
-Flags indicating how to handle the “password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “password-raw” property
-  “password-raw”             GBytes *
-Password used for EAP authentication methods, given as a byte array to
-allow passwords in other encodings than UTF-8 to be used. If both the
-“password” property and the “password-raw”
-property are specified, “password” is preferred.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “password-raw-flags” property
-  “password-raw-flags”       NMSettingSecretFlags
-Flags indicating how to handle the “password-raw” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase1-auth-flags” property
-  “phase1-auth-flags”        guint
-Specifies authentication flags to use in "phase 1" outer
-authentication using NMSetting8021xAuthFlags options.
-The individual TLS versions can be explicitly disabled. If a certain
-TLS disable flag is not set, it is up to the supplicant to allow
-or forbid it. The TLS options map to tls_disable_tlsv1_x settings.
-See the wpa_supplicant documentation for more details.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: 0
-Since: 1.8
-
-
-
-The “phase1-fast-provisioning” property
-  “phase1-fast-provisioning” char *
-Enables or disables in-line provisioning of EAP-FAST credentials when
-FAST is specified as the EAP method in the “eap” property.
-Recognized values are "0" (disabled), "1" (allow unauthenticated
-provisioning), "2" (allow authenticated provisioning), and "3" (allow
-both authenticated and unauthenticated provisioning).  See the
-wpa_supplicant documentation for more details.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase1-peaplabel” property
-  “phase1-peaplabel”         char *
-Forces use of the new PEAP label during key derivation.  Some RADIUS
-servers may require forcing the new PEAP label to interoperate with
-PEAPv1.  Set to "1" to force use of the new PEAP label.  See the
-wpa_supplicant documentation for more details.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase1-peapver” property
-  “phase1-peapver”           char *
-Forces which PEAP version is used when PEAP is set as the EAP method in
-the “eap” property.  When unset, the version reported by
-the server will be used.  Sometimes when using older RADIUS servers, it
-is necessary to force the client to use a particular PEAP version.  To do
-so, this property may be set to "0" or "1" to force that specific PEAP
-version.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase2-altsubject-matches” property
-  “phase2-altsubject-matches” GStrv
-List of strings to be matched against the altSubjectName of the
-certificate presented by the authentication server during the inner
-"phase 2" authentication. If the list is empty, no verification of the
-server certificate's altSubjectName is performed.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase2-auth” property
-  “phase2-auth”              char *
-Specifies the allowed "phase 2" inner authentication method when an EAP
-method that uses an inner TLS tunnel is specified in the “eap”
-property.  For TTLS this property selects one of the supported non-EAP
-inner methods: "pap", "chap", "mschap", "mschapv2" while
-“phase2-autheap” selects an EAP inner method.  For PEAP
-this selects an inner EAP method, one of: "gtc", "otp", "md5" and "tls".
-Each "phase 2" inner method requires specific parameters for successful
-authentication; see the wpa_supplicant documentation for more details.
-Both “phase2-auth” and “phase2-autheap” cannot
-be specified.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase2-autheap” property
-  “phase2-autheap”           char *
-Specifies the allowed "phase 2" inner EAP-based authentication method
-when TTLS is specified in the “eap” property.  Recognized
-EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and
-"tls". Each "phase 2" inner method requires specific parameters for
-successful authentication; see the wpa_supplicant documentation for
-more details.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase2-ca-cert” property
-  “phase2-ca-cert”           GBytes *
-Contains the "phase 2" CA certificate if used by the EAP method specified
-in the “phase2-auth” or “phase2-autheap”
-properties.
-Certificate data is specified using a "scheme"; three are currently
-supported: blob, path and pkcs11 URL. When using the blob scheme this property
-should be set to the certificate's DER encoded data. When using the path
-scheme, this property should be set to the full UTF-8 encoded path of the
-certificate, prefixed with the string "file://" and ending with a terminating
-NUL byte.
-This property can be unset even if the EAP method supports CA certificates,
-but this allows man-in-the-middle attacks and is NOT recommended.
-Note that enabling NMSetting8021x:system-ca-certs will override this
-setting to use the built-in path, if the built-in path is not a directory.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_phase2_ca_cert() function instead.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase2-ca-cert-password” property
-  “phase2-ca-cert-password”  char *
-The password used to access the "phase2" CA certificate stored in
-“phase2-ca-cert” property. Only makes sense if the certificate
-is stored on a PKCS#11 token that requires a login.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.8
-
-
-
-The “phase2-ca-cert-password-flags” property
-  “phase2-ca-cert-password-flags” NMSettingSecretFlags
-Flags indicating how to handle the “phase2-ca-cert-password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-Since: 1.8
-
-
-
-The “phase2-ca-path” property
-  “phase2-ca-path”           char *
-UTF-8 encoded path to a directory containing PEM or DER formatted
-certificates to be added to the verification chain in addition to the
-certificate specified in the “phase2-ca-cert” property.
-If NMSetting8021x:system-ca-certs is enabled and the built-in CA
-path is an existing directory, then this setting is ignored.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase2-client-cert” property
-  “phase2-client-cert”       GBytes *
-Contains the "phase 2" client certificate if used by the EAP method
-specified in the “phase2-auth” or
-“phase2-autheap” properties.
-Certificate data is specified using a "scheme"; two are currently
-supported: blob and path. When using the blob scheme (which is backwards
-compatible with NM 0.7.x) this property should be set to the
-certificate's DER encoded data. When using the path scheme, this property
-should be set to the full UTF-8 encoded path of the certificate, prefixed
-with the string "file://" and ending with a terminating NUL byte. This
-property can be unset even if the EAP method supports CA certificates,
-but this allows man-in-the-middle attacks and is NOT recommended.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_phase2_client_cert() function instead.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase2-client-cert-password” property
-  “phase2-client-cert-password” char *
-The password used to access the "phase2" client certificate stored in
-“phase2-client-cert” property. Only makes sense if the certificate
-is stored on a PKCS#11 token that requires a login.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.8
-
-
-
-The “phase2-client-cert-password-flags” property
-  “phase2-client-cert-password-flags” NMSettingSecretFlags
-Flags indicating how to handle the “phase2-client-cert-password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-Since: 1.8
-
-
-
-The “phase2-domain-match” property
-  “phase2-domain-match”      char *
-Constraint for server domain name. If set, this list of FQDNs is used as
-a match requirement for dNSName element(s) of the certificate presented
-by the authentication server during the inner "phase 2" authentication.
-If a matching dNSName is found, this constraint is met.  If no dNSName
-values are present, this constraint is matched against SubjectName CN
-using the same comparison.
-Multiple valid FQDNs can be passed as a ";" delimited list.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.24
-
-
-
-The “phase2-domain-suffix-match” property
-  “phase2-domain-suffix-match” char *
-Constraint for server domain name. If set, this FQDN is used as a suffix
-match requirement for dNSName element(s) of the certificate presented by
-the authentication server during the inner "phase 2" authentication.  If
-a matching dNSName is found, this constraint is met.  If no dNSName
-values are present, this constraint is matched against SubjectName CN
-using same suffix match comparison.
-Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited
-list.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-Since: 1.2
-
-
-
-The “phase2-private-key” property
-  “phase2-private-key”       GBytes *
-Contains the "phase 2" inner private key when the
-“phase2-auth” or “phase2-autheap” property is
-set to "tls".
-Key data is specified using a "scheme"; two are currently supported: blob
-and path. When using the blob scheme and private keys, this property
-should be set to the key's encrypted PEM encoded data. When using private
-keys with the path scheme, this property should be set to the full UTF-8
-encoded path of the key, prefixed with the string "file://" and ending
-with a terminating NUL byte. When using PKCS#12 format private
-keys and the blob scheme, this property should be set to the
-PKCS#12 data and the “phase2-private-key-password”
-property must be set to password used to decrypt the PKCS#12
-certificate and key. When using PKCS#12 files and the path
-scheme, this property should be set to the full UTF-8 encoded path of the
-key, prefixed with the string "file://" and ending with a terminating
-NUL byte, and as with the blob scheme the
-“phase2-private-key-password” property must be set to the
-password used to decode the PKCS#12 private key and certificate.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_phase2_private_key() function instead.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase2-private-key-password” property
-  “phase2-private-key-password” char *
-The password used to decrypt the "phase 2" private key specified in the
-“phase2-private-key” property when the private key either
-uses the path scheme, or is a PKCS#12 format key.  Setting this
-property directly is not generally necessary except when returning
-secrets to NetworkManager; it is generally set automatically when setting
-the private key by the nm_setting_802_1x_set_phase2_private_key()
-function.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “phase2-private-key-password-flags” property
-  “phase2-private-key-password-flags” NMSettingSecretFlags
-Flags indicating how to handle the
-“phase2-private-key-password” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “phase2-subject-match” property
-  “phase2-subject-match”     char *
-Substring to be matched against the subject of the certificate presented
-by the authentication server during the inner "phase 2"
-authentication. When unset, no verification of the authentication server
-certificate's subject is performed.  This property provides little security,
-if any, and its use is deprecated in favor of
-NMSetting8021x:phase2-domain-suffix-match.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “pin” property
-  “pin”                      char *
-PIN used for EAP authentication methods.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “pin-flags” property
-  “pin-flags”                NMSettingSecretFlags
-Flags indicating how to handle the “pin” property.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “private-key” property
-  “private-key”              GBytes *
-Contains the private key when the “eap” property is set to
-"tls".
-Key data is specified using a "scheme"; two are currently supported: blob
-and path. When using the blob scheme and private keys, this property
-should be set to the key's encrypted PEM encoded data. When using private
-keys with the path scheme, this property should be set to the full UTF-8
-encoded path of the key, prefixed with the string "file://" and ending
-with a terminating NUL byte. When using PKCS#12 format private
-keys and the blob scheme, this property should be set to the
-PKCS#12 data and the “private-key-password”
-property must be set to password used to decrypt the PKCS#12
-certificate and key. When using PKCS#12 files and the path
-scheme, this property should be set to the full UTF-8 encoded path of the
-key, prefixed with the string "file://" and ending with a terminating
-NUL byte, and as with the blob scheme the "private-key-password" property
-must be set to the password used to decode the PKCS#12 private
-key and certificate.
-Setting this property directly is discouraged; use the
-nm_setting_802_1x_set_private_key() function instead.
-WARNING: “private-key” is not a "secret" property, and thus
-unencrypted private key data using the BLOB scheme may be readable by
-unprivileged users.  Private keys should always be encrypted with a
-private key password to prevent unauthorized access to unencrypted
-private key data.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “private-key-password” property
-  “private-key-password”     char *
-The password used to decrypt the private key specified in the
-“private-key” property when the private key either uses the
-path scheme, or if the private key is a PKCS#12 format key.  Setting this
-property directly is not generally necessary except when returning
-secrets to NetworkManager; it is generally set automatically when setting
-the private key by the nm_setting_802_1x_set_private_key() function.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “private-key-password-flags” property
-  “private-key-password-flags” NMSettingSecretFlags
-Flags indicating how to handle the “private-key-password”
-property.
-Owner: NMSetting8021x
-Flags: Read / Write
-
-
-
-The “subject-match” property
-  “subject-match”            char *
-Substring to be matched against the subject of the certificate presented
-by the authentication server. When unset, no verification of the
-authentication server certificate's subject is performed.  This property
-provides little security, if any, and its use is deprecated in favor of
-NMSetting8021x:domain-suffix-match.
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: NULL
-
-
-
-The “system-ca-certs” property
-  “system-ca-certs”          gboolean
-When TRUE, overrides the “ca-path” and
-“phase2-ca-path” properties using the system CA directory
-specified at configure time with the --system-ca-path switch.  The
-certificates in this directory are added to the verification chain in
-addition to any certificates specified by the “ca-cert” and
-“phase2-ca-cert” properties. If the path provided with
---system-ca-path is rather a file name (bundle of trusted CA certificates),
-it overrides “ca-cert” and “phase2-ca-cert”
-properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant).
-Owner: NMSetting8021x
-Flags: Read / Write
-Default value: FALSE
-
 
 
 
-- 
cgit 1.3.0-6-gf8a5


From 88c227d90a6b7b388c5c85d72802a0ca8f05ed5c Mon Sep 17 00:00:00 2001
From: Michael Biebl 
Date: Thu, 13 Jan 2022 22:30:39 +0100
Subject: New upstream version 1.34.0

---
 docs/libnm/html/NMSetting8021x.html | 100 ++++++++++++++++++------------------
 1 file changed, 50 insertions(+), 50 deletions(-)

(limited to 'docs/libnm/html/NMSetting8021x.html')

diff --git a/docs/libnm/html/NMSetting8021x.html b/docs/libnm/html/NMSetting8021x.html
index be3880c4..da4624a4 100644
--- a/docs/libnm/html/NMSetting8021x.html
+++ b/docs/libnm/html/NMSetting8021x.html
@@ -1106,7 +1106,7 @@ nm_setting_802_1x_get_eap_method (NMSetting8021x *setting,
                                   const char *eap);
 Adds an allowed EAP method.  The setting is not valid until at least one
-EAP method has been added.  See “eap” property for a list of
+EAP method has been added.  See “eap” property for a list of
 allowed EAP methods.
 
 Parameters
@@ -1259,7 +1259,7 @@ nm_setting_802_1x_get_anonymous_identity
                                (NMSetting8021x *setting);
 Returns the anonymous identifier used by some EAP methods (like TTLS) to
 authenticate the user in the outer unencrypted "phase 1" authentication.  The
-inner "phase 2" authentication will use the “identity” in
+inner "phase 2" authentication will use the “identity” in
 a secure form, if applicable for that EAP method.
 
 Parameters
@@ -1312,9 +1312,9 @@ nm_setting_802_1x_get_pac_file (nm_setting_802_1x_get_system_ca_certs ()
 gboolean
 nm_setting_802_1x_get_system_ca_certs (NMSetting8021x *setting);
-Sets the “system-ca-certs” property. The
-“ca-path” and “phase2-ca-path”
-properties are ignored if the “system-ca-certs” property is
+
Sets the “system-ca-certs” property. The
+“ca-path” and “phase2-ca-path”
+properties are ignored if the “system-ca-certs” property is
 TRUE, in which case a system-wide CA certificate directory specified at
 compile time (using the --system-ca-path configure option) is used in place
 of these properties.
@@ -1346,7 +1346,7 @@ nm_setting_802_1x_get_ca_path (Returns the path of the CA certificate directory if previously set.  Systems
 will often have a directory that contains multiple individual CA certificates
 which the supplicant can then add to the verification chain.  This may be
-used in addition to the “ca-cert” property to add more CA
+used in addition to the “ca-cert” property to add more CA
 certificates for verifying the network to client.
 
 Parameters
@@ -1376,7 +1376,7 @@ nm_setting_802_1x_get_phase2_ca_path (“phase2-ca-cert” property
+This may be used in addition to the “phase2-ca-cert” property
 to add more CA certificates for verifying the network to client.
 
 Parameters
@@ -1531,7 +1531,7 @@ nm_setting_802_1x_set_ca_cert (NMSetting8021xCKScheme scheme,
                                NMSetting8021xCKFormat *out_format,
                                GError **error);
-Reads a certificate from disk and sets the “ca-cert” property
+
Reads a certificate from disk and sets the “ca-cert” property
 with the raw certificate data if using the NM_SETTING_802_1X_CK_SCHEME_BLOB
 scheme, or with the path to the certificate file if using the
 NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -1606,7 +1606,7 @@ nm_setting_802_1x_get_ca_cert_password
 
 Returns
  the password used to access the CA certificate stored in
-“ca-cert” property. Only makes sense if the certificate
+“ca-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -1635,7 +1635,7 @@ nm_setting_802_1x_get_ca_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“ca-cert-password”
+“ca-cert-password”
 
 Since: 1.8
 

@@ -1661,7 +1661,7 @@ nm_setting_802_1x_get_subject_match (
 
 Returns
- the “subject-match” property. This is the
+
 the “subject-match” property. This is the
 substring to be matched against the subject of the authentication
 server certificate, or NULL no subject verification is to be
 performed.
@@ -1674,7 +1674,7 @@ performed.
 nm_setting_802_1x_get_num_altsubject_matches
                                (NMSetting8021x *setting);
 Returns the number of entries in the
-“altsubject-matches” property of this setting.
+“altsubject-matches” property of this setting.
 
 Parameters
 

@@ -1884,7 +1884,7 @@ nm_setting_802_1x_get_domain_suffix_match
 
 
 Returns
- the “domain-suffix-match” property.
+ the “domain-suffix-match” property.
 
 Since: 1.2
 
@@ -1910,7 +1910,7 @@ nm_setting_802_1x_get_domain_match (
 
 Returns
- the “domain-match” property.
+ the “domain-match” property.
 
 Since: 1.24
 
@@ -2044,7 +2044,7 @@ nm_setting_802_1x_set_client_cert (NMSetting8021xCKScheme scheme,
                                    NMSetting8021xCKFormat *out_format,
                                    GError **error);
-Reads a certificate from disk and sets the “client-cert”
+
Reads a certificate from disk and sets the “client-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -2123,7 +2123,7 @@ nm_setting_802_1x_get_client_cert_password
 
 Returns
  the password used to access the client certificate stored in
-“client-cert” property. Only makes sense if the certificate
+“client-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -2152,7 +2152,7 @@ nm_setting_802_1x_get_client_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“client-cert-password”
+“client-cert-password”
 
 Since: 1.8
 
@@ -2179,7 +2179,7 @@ nm_setting_802_1x_get_phase1_peapver (
 Returns
  the "phase 1" PEAP version to be used when authenticating with
-EAP-PEAP as contained in the “phase1-peapver” property.  Valid
+EAP-PEAP as contained in the “phase1-peapver” property.  Valid
 values are NULL (unset), "0" (PEAP version 0), and "1" (PEAP version 1).
 
 
@@ -2208,7 +2208,7 @@ nm_setting_802_1x_get_phase1_peaplabel
 Returns
  whether the "phase 1" PEAP label is new-style or old-style, to be
 used when authenticating with EAP-PEAP, as contained in the
-“phase1-peaplabel” property.  Valid values are NULL (unset),
+“phase1-peaplabel” property.  Valid values are NULL (unset),
 "0" (use old-style label), and "1" (use new-style label).  See the
 wpa_supplicant documentation for more details.
 
@@ -2237,7 +2237,7 @@ nm_setting_802_1x_get_phase1_fast_provisioning
 
 Returns
  whether "phase 1" PEAP fast provisioning should be used, as specified
-by the “phase1-fast-provisioning” property.  See the
+by the “phase1-fast-provisioning” property.  See the
 wpa_supplicant documentation for more details.
 
 
@@ -2264,7 +2264,7 @@ nm_setting_802_1x_get_phase2_auth (
 Returns
  the "phase 2" non-EAP (ex MD5) allowed authentication method as
-specified by the “phase2-auth” property.
+specified by the “phase2-auth” property.
 
 
 
@@ -2290,7 +2290,7 @@ nm_setting_802_1x_get_phase2_autheap (
 Returns
  the "phase 2" EAP-based (ex TLS) allowed authentication method as
-specified by the “phase2-autheap” property.
+specified by the “phase2-autheap” property.
 
 
 
@@ -2431,7 +2431,7 @@ nm_setting_802_1x_set_phase2_ca_cert (NMSetting8021xCKScheme scheme,
                                       NMSetting8021xCKFormat *out_format,
                                       GError **error);
-Reads a certificate from disk and sets the “phase2-ca-cert”
+
Reads a certificate from disk and sets the “phase2-ca-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -2506,7 +2506,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password
 
 Returns
  the password used to access the "phase2" CA certificate stored in
-“phase2-ca-cert” property. Only makes sense if the certificate
+“phase2-ca-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -2535,7 +2535,7 @@ nm_setting_802_1x_get_phase2_ca_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-private-key-password”
+“phase2-private-key-password”
 
 Since: 1.8
 
@@ -2562,7 +2562,7 @@ nm_setting_802_1x_get_phase2_subject_match
 
 
 Returns
- the “phase2-subject-match” property. This is
+
 the “phase2-subject-match” property. This is
 the substring to be matched against the subject of the "phase 2"
 authentication server certificate, or NULL no subject verification
 is to be performed.
@@ -2575,7 +2575,7 @@ is to be performed.
 nm_setting_802_1x_get_num_phase2_altsubject_matches
                                (NMSetting8021x *setting);
 Returns the number of entries in the
-“phase2-altsubject-matches” property of this setting.
+“phase2-altsubject-matches” property of this setting.
 
 Parameters
 

@@ -2786,7 +2786,7 @@ nm_setting_802_1x_get_phase2_domain_suffix_match
 
 
 Returns
- the “phase2-domain-suffix-match” property.
+ the “phase2-domain-suffix-match” property.
 
 Since: 1.2
 
@@ -2813,7 +2813,7 @@ nm_setting_802_1x_get_phase2_domain_match
 
 
 Returns
- the “phase2-domain-match” property.
+ the “phase2-domain-match” property.
 
 Since: 1.24
 
@@ -2952,7 +2952,7 @@ nm_setting_802_1x_set_phase2_client_cert
                                 NMSetting8021xCKScheme scheme,
                                 NMSetting8021xCKFormat *out_format,
                                 GError **error);
-Reads a certificate from disk and sets the “phase2-client-cert”
+
Reads a certificate from disk and sets the “phase2-client-cert”
 property with the raw certificate data if using the
 NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the certificate
 file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
@@ -3031,7 +3031,7 @@ nm_setting_802_1x_get_phase2_client_cert_password
 
 Returns
  the password used to access the "phase2" client certificate stored in
-“phase2-client-cert” property. Only makes sense if the certificate
+“phase2-client-cert” property. Only makes sense if the certificate
 is stored on a PKCS#11 token that requires a login.
 
 Since: 1.8
@@ -3060,7 +3060,7 @@ nm_setting_802_1x_get_phase2_client_cert_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-client-cert-password”
+“phase2-client-cert-password”
 
 Since: 1.8
 
@@ -3087,7 +3087,7 @@ nm_setting_802_1x_get_password (
 Returns
  the password used by the authentication method, if any, as specified
-by the “password” property
+by the “password” property
 
 
 
@@ -3112,7 +3112,7 @@ nm_setting_802_1x_get_password_flags (
 Returns
- the NMSettingSecretFlags pertaining to the “password”
+ the NMSettingSecretFlags pertaining to the “password”
 
 
 
@@ -3139,7 +3139,7 @@ nm_setting_802_1x_get_password_raw (Returns
 the password used by the authentication method as a
 UTF-8-encoded array of bytes, as specified by the
-“password-raw” property. 
+“password-raw” property. 
 [transfer none]
 
 
@@ -3167,7 +3167,7 @@ nm_setting_802_1x_get_password_raw_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“password-raw”
+“password-raw”
 
 
 
@@ -3193,7 +3193,7 @@ nm_setting_802_1x_get_pin (
 Returns
  the PIN used by the authentication method, if any, as specified
-by the “pin” property
+by the “pin” property
 
 
 
@@ -3219,7 +3219,7 @@ nm_setting_802_1x_get_pin_flags (
 Returns
  the NMSettingSecretFlags pertaining to the
-“pin”
+“pin”
 
 
 
@@ -3363,14 +3363,14 @@ nm_setting_802_1x_set_private_key (
 This function reads a private key from disk and sets the
-“private-key” property with the private key file data if using
+“private-key” property with the private key file data if using
 the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the private
 key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
 If password
  is given, this function attempts to decrypt the private key to
 verify that password
  is correct, and if it is, updates the
-“private-key-password” property with the given password
+“private-key-password” property with the given password
 .  If
 the decryption is unsuccessful, FALSE is returned, error
  is set, and no
@@ -3461,7 +3461,7 @@ nm_setting_802_1x_get_private_key_password
 
Returns
  the private key password used to decrypt the private key if
 previously set with nm_setting_802_1x_set_private_key(), or the
-“private-key-password” property.
+“private-key-password” property.
 
 
 
@@ -3488,7 +3488,7 @@ nm_setting_802_1x_get_private_key_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“private-key-password”
+“private-key-password”
 
 
 
@@ -3515,7 +3515,7 @@ nm_setting_802_1x_get_private_key_format
 
 Returns
  the data format of the private key data stored in the
-“private-key” property
+“private-key” property
 
 
 
@@ -3661,14 +3661,14 @@ nm_setting_802_1x_set_phase2_private_key
 when EAP-TLS is used as either the "phase 1" or "phase 2" 802.1x
 authentication method.
 This function reads a private key from disk and sets the
-“phase2-private-key” property with the private key file data if
+“phase2-private-key” property with the private key file data if
 using the NM_SETTING_802_1X_CK_SCHEME_BLOB scheme, or with the path to the
 private key file if using the NM_SETTING_802_1X_CK_SCHEME_PATH scheme.
 If password
  is given, this function attempts to decrypt the private key to
 verify that password
  is correct, and if it is, updates the
-“phase2-private-key-password” property with the given
+“phase2-private-key-password” property with the given
 password
 .  If the decryption is unsuccessful, FALSE is returned, error
  is
@@ -3760,7 +3760,7 @@ nm_setting_802_1x_get_phase2_private_key_password
 
Returns
  the private key password used to decrypt the private key if
 previously set with nm_setting_802_1x_set_phase2_private_key() or the
-“phase2-private-key-password” property.
+“phase2-private-key-password” property.
 
 
 
@@ -3787,7 +3787,7 @@ nm_setting_802_1x_get_phase2_private_key_password_flags
 
 Returns
  the NMSettingSecretFlags pertaining to the
-“phase2-private-key-password”
+“phase2-private-key-password”
 
 
 
@@ -3814,7 +3814,7 @@ nm_setting_802_1x_get_phase2_private_key_format
 
 Returns
  the data format of the "phase 2" private key data stored in the
-“phase2-private-key” property
+“phase2-private-key” property
 
 
 
@@ -3849,7 +3849,7 @@ nm_setting_802_1x_get_phase1_auth_flags
 nm_setting_802_1x_get_auth_timeout ()
 int
 nm_setting_802_1x_get_auth_timeout (NMSetting8021x *setting);
-Returns the value contained in the “auth-timeout” property.
+Returns the value contained in the “auth-timeout” property.
 
 Parameters
 

@@ -3877,7 +3877,7 @@ global default value.
 nm_setting_802_1x_get_optional ()
 gboolean
 nm_setting_802_1x_get_optional (NMSetting8021x *setting);
-Returns the value contained in the “optional” property.
+Returns the value contained in the “optional” property.
 
 Parameters
 

-- 
cgit 1.3.0-6-gf8a5
GStrv	altsubject-matches	Read / Write
-char *	anonymous-identity	Read / Write
int	auth-timeout	Read / Write
-GBytes *	ca-cert	Read / Write
-char *	ca-cert-password	Read / Write
NMSettingSecretFlags	ca-cert-password-flags	Read / Write
-char *	ca-path	Read / Write
-GBytes *	client-cert	Read / Write
-char *	client-cert-password	Read / Write
NMSettingSecretFlags	client-cert-password-flags	Read / Write
-char *	domain-match	Read / Write
-char *	domain-suffix-match	Read / Write
GStrv	eap	Read / Write
-char *	identity	Read / Write
gboolean	optional	Read / Write
-char *	pac-file	Read / Write
-char *	password	Read / Write
NMSettingSecretFlags	password-flags	Read / Write
-GBytes *	password-raw	Read / Write
NMSettingSecretFlags	password-raw-flags	Read / Write
guint	phase1-auth-flags	Read / Write
-char *	phase1-fast-provisioning	Read / Write
-char *	phase1-peaplabel	Read / Write
-char *	phase1-peapver	Read / Write
GStrv	phase2-altsubject-matches	Read / Write
-char *	phase2-auth	Read / Write
-char *	phase2-autheap	Read / Write
-GBytes *	phase2-ca-cert	Read / Write
-char *	phase2-ca-cert-password	Read / Write
NMSettingSecretFlags	phase2-ca-cert-password-flags	Read / Write
-char *	phase2-ca-path	Read / Write
-GBytes *	phase2-client-cert	Read / Write
-char *	phase2-client-cert-password	Read / Write
NMSettingSecretFlags	phase2-client-cert-password-flags	Read / Write
-char *	phase2-domain-match	Read / Write
-char *	phase2-domain-suffix-match	Read / Write
-GBytes *	phase2-private-key	Read / Write
-char *	phase2-private-key-password	Read / Write
NMSettingSecretFlags	phase2-private-key-password-flags	Read / Write
-char *	phase2-subject-match	Read / Write
-char *	pin	Read / Write
NMSettingSecretFlags	pin-flags	Read / Write
-GBytes *	private-key	Read / Write
-char *	private-key-password	Read / Write
NMSettingSecretFlags	private-key-password-flags	Read / Write
-char *	subject-match	Read / Write
gboolean	system-ca-certs	Read / Write
Returns

Returns

Returns

Returns

Returns

Returns

Properties

Types and Values

Parameters

Parameters

nm_setting_802_1x_get_system_ca_certs ()

Parameters

Parameters

Returns

Returns

Returns

Parameters

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Parameters

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

Returns

nm_setting_802_1x_get_auth_timeout ()

Parameters

nm_setting_802_1x_get_optional ()

Parameters

NMSetting8021x

Property Details

The “altsubject-matches” property

The “anonymous-identity” property

The “auth-timeout” property

The “ca-cert” property

The “ca-cert-password” property

The “ca-cert-password-flags” property

The “ca-path” property

The “client-cert” property

The “client-cert-password” property

The “client-cert-password-flags” property

The “domain-match” property

The “domain-suffix-match” property

The “eap” property

The “identity” property

The “optional” property

The “pac-file” property

The “password” property

The “password-flags” property

The “password-raw” property

The “password-raw-flags” property

The “phase1-auth-flags” property

The “phase1-fast-provisioning” property

The “phase1-peaplabel” property

The “phase1-peapver” property

The “phase2-altsubject-matches” property

The “phase2-auth” property

The “phase2-autheap” property

The “phase2-ca-cert” property

The `“altsubject-matches”` property

The `“anonymous-identity”` property

The `“auth-timeout”` property

The `“ca-cert”` property

The `“ca-cert-password”` property

The `“ca-cert-password-flags”` property

The `“ca-path”` property

The `“client-cert”` property

The `“client-cert-password”` property

The `“client-cert-password-flags”` property

The `“domain-match”` property

The `“domain-suffix-match”` property

The `“eap”` property

The `“identity”` property

The `“optional”` property

The `“pac-file”` property

The `“password”` property

The `“password-flags”` property

The `“password-raw”` property

The `“password-raw-flags”` property

The `“phase1-auth-flags”` property

The `“phase1-fast-provisioning”` property

The `“phase1-peaplabel”` property

The `“phase1-peapver”` property

The `“phase2-altsubject-matches”` property

The `“phase2-auth”` property

The `“phase2-autheap”` property

The `“phase2-ca-cert”` property

The `“phase2-ca-cert-password”` property

The `“phase2-ca-cert-password-flags”` property

The `“phase2-ca-path”` property

The `“phase2-client-cert”` property

The `“phase2-client-cert-password”` property

The `“phase2-client-cert-password-flags”` property

The `“phase2-domain-match”` property

The `“phase2-domain-suffix-match”` property

The `“phase2-private-key”` property

The `“phase2-private-key-password”` property

The `“phase2-private-key-password-flags”` property

The `“phase2-subject-match”` property

The `“pin”` property

The `“pin-flags”` property

The `“private-key”` property

The `“private-key-password”` property

The `“private-key-password-flags”` property

The `“subject-match”` property

The `“system-ca-certs”` property
