NMSettingWirelessSecurity

@@ -38,1409 +32,1753 @@

NMSettingWirelessSecurity — Describes connection properties for WiFi networks that use WEP, LEAP, WPA or WPA2/RSN security

- +

Synopsis

-#include <nm-setting-wireless-security.h>
-
-#define             NM_SETTING_WIRELESS_SECURITY_SETTING_NAME
-enum                NMSettingWirelessSecurityError;
-#define             NM_SETTING_WIRELESS_SECURITY_ERROR
-GQuark              nm_setting_wireless_security_error_quark
-                                                        (void);
-enum                NMWepKeyType;
-#define             NM_SETTING_WIRELESS_SECURITY_KEY_MGMT
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX
-#define             NM_SETTING_WIRELESS_SECURITY_AUTH_ALG
-#define             NM_SETTING_WIRELESS_SECURITY_PROTO
-#define             NM_SETTING_WIRELESS_SECURITY_PAIRWISE
-#define             NM_SETTING_WIRELESS_SECURITY_GROUP
-#define             NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY0
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY1
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY2
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY3
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS
-#define             NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE
-#define             NM_SETTING_WIRELESS_SECURITY_PSK
-#define             NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS
-#define             NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD
-#define             NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS
-                    NMSettingWirelessSecurity;
-                    NMSettingWirelessSecurityClass;
-NMSetting *         nm_setting_wireless_security_new    (void);
-const char *        nm_setting_wireless_security_get_key_mgmt
-                                                        (NMSettingWirelessSecurity *setting);
-guint32             nm_setting_wireless_security_get_num_protos
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-gboolean            nm_setting_wireless_security_add_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         const char *proto);
-void                nm_setting_wireless_security_remove_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-void                nm_setting_wireless_security_clear_protos
-                                                        (NMSettingWirelessSecurity *setting);
-guint32             nm_setting_wireless_security_get_num_pairwise
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-gboolean            nm_setting_wireless_security_add_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         const char *pairwise);
-void                nm_setting_wireless_security_remove_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-void                nm_setting_wireless_security_clear_pairwise
-                                                        (NMSettingWirelessSecurity *setting);
-guint32             nm_setting_wireless_security_get_num_groups
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_group
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-gboolean            nm_setting_wireless_security_add_group
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         const char *group);
-void                nm_setting_wireless_security_remove_group
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-void                nm_setting_wireless_security_clear_groups
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_psk
-                                                        (NMSettingWirelessSecurity *setting);
-NMSettingSecretFlags nm_setting_wireless_security_get_psk_flags
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_leap_username
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_leap_password
-                                                        (NMSettingWirelessSecurity *setting);
-NMSettingSecretFlags nm_setting_wireless_security_get_leap_password_flags
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_wep_key
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 idx);
-void                nm_setting_wireless_security_set_wep_key
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 idx,
-                                                         const char *key);
-guint32             nm_setting_wireless_security_get_wep_tx_keyidx
-                                                        (NMSettingWirelessSecurity *setting);
-const char *        nm_setting_wireless_security_get_auth_alg
-                                                        (NMSettingWirelessSecurity *setting);
-NMSettingSecretFlags nm_setting_wireless_security_get_wep_key_flags
-                                                        (NMSettingWirelessSecurity *setting);
-NMWepKeyType        nm_setting_wireless_security_get_wep_key_type
-                                                        (NMSettingWirelessSecurity *setting);
-

Object Hierarchy

-  GEnum
-   +----NMSettingWirelessSecurityError
-

-  GEnum
-   +----NMWepKeyType
-

-  GObject
-   +----NMSetting
-         +----NMSettingWirelessSecurity
-

Properties

-  "auth-alg"                 gchar*                : Read / Write
-  "group"                    GSList_gchararray_*   : Read / Write
-  "key-mgmt"                 gchar*                : Read / Write
-  "leap-password"            gchar*                : Read / Write
-  "leap-password-flags"      guint                 : Read / Write
-  "leap-username"            gchar*                : Read / Write
-  "pairwise"                 GSList_gchararray_*   : Read / Write
-  "proto"                    GSList_gchararray_*   : Read / Write
-  "psk"                      gchar*                : Read / Write
-  "psk-flags"                guint                 : Read / Write
-  "wep-key-flags"            guint                 : Read / Write
-  "wep-key-type"             guint                 : Read / Write / Construct
-  "wep-key0"                 gchar*                : Read / Write
-  "wep-key1"                 gchar*                : Read / Write
-  "wep-key2"                 gchar*                : Read / Write
-  "wep-key3"                 gchar*                : Read / Write
-  "wep-tx-keyidx"            guint                 : Read / Write / Construct
-

Description

-The NMSettingWirelessSecurity object is a NMSetting subclass that describes -properties necessary for connection to encrypted WiFi networks. -

-It's a good idea to read up on wpa_supplicant configuration before using this -setting extensively, since most of the options here correspond closely with -the relevant wpa_supplicant configuration options. To get a better overview -of how WiFi security works, you may want to get copies of the following books. -

- 802.11 Wireless Networks: The Definitive Guide, Second Edition - Author: Matthew Gast - ISBN: 978-0596100520 -

- Cisco Wireless LAN Security - Authors: Krishna Sankar, Sri Sundaralingam, Darrin Miller, and Andrew Balinsky - ISBN: 978-1587051548 -

Details

NM_SETTING_WIRELESS_SECURITY_SETTING_NAME

#define NM_SETTING_WIRELESS_SECURITY_SETTING_NAME "802-11-wireless-security"
-

enum NMSettingWirelessSecurityError

typedef enum {
-	NM_SETTING_WIRELESS_SECURITY_ERROR_UNKNOWN = 0,            /*< nick=UnknownError >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_INVALID_PROPERTY,       /*< nick=InvalidProperty >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_PROPERTY,       /*< nick=MissingProperty >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING, /*< nick=Missing8021xSetting >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X,   /*< nick=LEAPRequires8021x >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME, /*< nick=LEAPRequiresUsername >*/
-	NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP /*< nick=SharedKeyRequiresWEP >*/
-} NMSettingWirelessSecurityError;
-

Functions

--++ - - + - - + + + + + - - + - - + - - + - - + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

`NM_SETTING_WIRELESS_SECURITY_ERROR_UNKNOWN`	unknown or unclassified error +	+GQuark +	+nm_setting_wireless_security_error_quark ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_INVALID_PROPERTY`	the property was invalid +	+NMSetting * +	+nm_setting_wireless_security_new () +
const char * +	+nm_setting_wireless_security_get_key_mgmt ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_PROPERTY`	the property was -missing and is required +	+guint32 +	+nm_setting_wireless_security_get_num_protos ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING`	a property contained -a value that requires the connection to contain a NMSetting8021x setting +	const char * +	+nm_setting_wireless_security_get_proto ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X`	LEAP authentication -was specified but key management was not set to "8021x" +	+gboolean +	+nm_setting_wireless_security_add_proto ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME`	LEAP authentication -was specified but no LEAP username was given +	+void +	+nm_setting_wireless_security_remove_proto ()
`NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP`	Shared Key -authentication was specified but the setting did not specify WEP as the -encryption protocol +	+void +	+nm_setting_wireless_security_clear_protos () +
+guint32 +	+nm_setting_wireless_security_get_num_pairwise () +
const char * +	+nm_setting_wireless_security_get_pairwise () +
+gboolean +	+nm_setting_wireless_security_add_pairwise () +
+void +	+nm_setting_wireless_security_remove_pairwise () +
+void +	+nm_setting_wireless_security_clear_pairwise () +
+guint32 +	+nm_setting_wireless_security_get_num_groups () +
const char * +	+nm_setting_wireless_security_get_group () +
+gboolean +	+nm_setting_wireless_security_add_group () +
+void +	+nm_setting_wireless_security_remove_group () +
+void +	+nm_setting_wireless_security_clear_groups () +
const char * +	+nm_setting_wireless_security_get_psk () +
+NMSettingSecretFlags +	+nm_setting_wireless_security_get_psk_flags () +
const char * +	+nm_setting_wireless_security_get_leap_username () +
const char * +	+nm_setting_wireless_security_get_leap_password () +
+NMSettingSecretFlags +	+nm_setting_wireless_security_get_leap_password_flags () +
const char * +	+nm_setting_wireless_security_get_wep_key () +
+void +	+nm_setting_wireless_security_set_wep_key () +
+guint32 +	+nm_setting_wireless_security_get_wep_tx_keyidx () +
const char * +	+nm_setting_wireless_security_get_auth_alg () +
+NMSettingSecretFlags +	+nm_setting_wireless_security_get_wep_key_flags () +
+NMWepKeyType +	+nm_setting_wireless_security_get_wep_key_type ()

NM_SETTING_WIRELESS_SECURITY_ERROR

#define NM_SETTING_WIRELESS_SECURITY_ERROR nm_setting_wireless_security_error_quark ()
-

nm_setting_wireless_security_error_quark ()

GQuark              nm_setting_wireless_security_error_quark
-                                                        (void);

-Registers an error quark for NMSettingWired if necessary. -

---- - - - - -

Returns :

the error quark used for NMSettingWired errors.

enum NMWepKeyType

typedef enum {
-	NM_WEP_KEY_TYPE_UNKNOWN = 0,
-	NM_WEP_KEY_TYPE_KEY = 1,          /* Hex or ASCII */
-	NM_WEP_KEY_TYPE_PASSPHRASE = 2,   /* 104/128-bit Passphrase */
-
-	NM_WEP_KEY_TYPE_LAST = NM_WEP_KEY_TYPE_PASSPHRASE
-} NMWepKeyType;
-

-The NMWepKeyType values specify how any WEP keys present in the setting -are intepreted. There are no standards governing how to hash the various WEP -key/passphrase formats into the actual WEP key. Unfortunately some WEP keys -can be interpreted in multiple ways, requring the setting to specify how to -interpret the any WEP keys. For example, the key "732f2d712e4a394a375d366931" -is both a valid Hexadecimal WEP key and a WEP passphrase. Further, many -ASCII keys are also valid WEP passphrases, but since passphrases and ASCII -keys are hashed differently to determine the actual WEP key the type must be -specified. -

Properties

--+++ - - + + + - - + + + - - + + + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

`NM_WEP_KEY_TYPE_UNKNOWN`	unknown WEP key type -	+gchar *	auth-alg	Read / Write
`NM_WEP_KEY_TYPE_KEY`	indicates a hexadecimal or ASCII formatted WEP key. -Hex keys are either 10 or 26 hexadecimal characters (ie "5f782f2f5f" or -"732f2d712e4a394a375d366931"), while ASCII keys are either 5 or 13 ASCII -characters (ie "abcde" or "blahblah99$*1"). -	+GSList_gchararray_ *	group	Read / Write
`NM_WEP_KEY_TYPE_PASSPHRASE`	indicates a WEP passphrase (ex "I bought a duck -on my way back from the market 235Q&^%^*%") instead of a hexadecimal or ASCII -key. Passphrases are between 8 and 64 characters inclusive and are hashed -the actual WEP key using the MD5 hash algorithm. -	+gchar *	key-mgmt	Read / Write
`NM_WEP_KEY_TYPE_LAST`	placeholder value for bounds-checking -	+gchar *	leap-password	Read / Write
guint	leap-password-flags	Read / Write
+gchar *	leap-username	Read / Write
+GSList_gchararray_ *	pairwise	Read / Write
+GSList_gchararray_ *	proto	Read / Write
+gchar *	psk	Read / Write
guint	psk-flags	Read / Write
guint	wep-key-flags	Read / Write
guint	wep-key-type	Read / Write / Construct
+gchar *	wep-key0	Read / Write
+gchar *	wep-key1	Read / Write
+gchar *	wep-key2	Read / Write
+gchar *	wep-key3	Read / Write
guint	wep-tx-keyidx	Read / Write / Construct

NM_SETTING_WIRELESS_SECURITY_KEY_MGMT

#define NM_SETTING_WIRELESS_SECURITY_KEY_MGMT "key-mgmt"
-

NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX

#define NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX "wep-tx-keyidx"
-

NM_SETTING_WIRELESS_SECURITY_AUTH_ALG

#define NM_SETTING_WIRELESS_SECURITY_AUTH_ALG "auth-alg"
-

NM_SETTING_WIRELESS_SECURITY_PROTO

#define NM_SETTING_WIRELESS_SECURITY_PROTO "proto"
-

NM_SETTING_WIRELESS_SECURITY_PAIRWISE

#define NM_SETTING_WIRELESS_SECURITY_PAIRWISE "pairwise"
-

NM_SETTING_WIRELESS_SECURITY_GROUP

#define NM_SETTING_WIRELESS_SECURITY_GROUP "group"
-

NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME

#define NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME "leap-username"
-

NM_SETTING_WIRELESS_SECURITY_WEP_KEY0

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY0 "wep-key0"
-

NM_SETTING_WIRELESS_SECURITY_WEP_KEY1

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY1 "wep-key1"
-

NM_SETTING_WIRELESS_SECURITY_WEP_KEY2

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY2 "wep-key2"
-

NM_SETTING_WIRELESS_SECURITY_WEP_KEY3

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY3 "wep-key3"
-

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS "wep-key-flags"
-

Types and Values

++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

#define	NM_SETTING_WIRELESS_SECURITY_SETTING_NAME
enum	NMSettingWirelessSecurityError
#define	NM_SETTING_WIRELESS_SECURITY_ERROR
enum	NMWepKeyType
#define	NM_SETTING_WIRELESS_SECURITY_KEY_MGMT
#define	NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX
#define	NM_SETTING_WIRELESS_SECURITY_AUTH_ALG
#define	NM_SETTING_WIRELESS_SECURITY_PROTO
#define	NM_SETTING_WIRELESS_SECURITY_PAIRWISE
#define	NM_SETTING_WIRELESS_SECURITY_GROUP
#define	NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY0
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY1
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY2
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY3
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS
#define	NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE
#define	NM_SETTING_WIRELESS_SECURITY_PSK
#define	NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS
#define	NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD
#define	NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE "wep-key-type"
+
+Object Hierarchy
+    GEnum
+    ├── NMSettingWirelessSecurityError
+    ╰── NMWepKeyType
+    GObject
+    ╰── NMSetting
+        ╰── NMSettingWirelessSecurity
 
-
-
 
-
-
-NM_SETTING_WIRELESS_SECURITY_PSK
-#define NM_SETTING_WIRELESS_SECURITY_PSK "psk"
+
+Includes
+#include <nm-setting-wireless-security.h>
 
-
-
 
-
-
-NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS
-#define NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS "psk-flags"
-
-
-
+
+Description
+The NMSettingWirelessSecurity object is a NMSetting subclass that describes
+properties necessary for connection to encrypted WiFi networks.
+It's a good idea to read up on wpa_supplicant configuration before using this
+setting extensively, since most of the options here correspond closely with
+the relevant wpa_supplicant configuration options.  To get a better overview
+of how WiFi security works, you may want to get copies of the following books.
+ 802.11 Wireless Networks: The Definitive Guide, Second Edition
+      Author: Matthew Gast
+      ISBN: 978-0596100520
+ Cisco Wireless LAN Security
+      Authors: Krishna Sankar, Sri Sundaralingam, Darrin Miller, and Andrew Balinsky
+      ISBN: 978-1587051548
 
-
+
+Functions
 
-NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD
-#define NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD "leap-password"
-
-
-
+nm_setting_wireless_security_error_quark ()
+GQuark
+nm_setting_wireless_security_error_quark
+                               (void);
+Registers an error quark for NMSettingWired if necessary.
+
+Returns
+ the error quark used for NMSettingWired errors.
+
 
-
-
-NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS
-#define NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS "leap-password-flags"
-
-
-
 
 
 
-NMSettingWirelessSecurity
-typedef struct _NMSettingWirelessSecurity NMSettingWirelessSecurity;
-
-
+nm_setting_wireless_security_new ()
+NMSetting *
+nm_setting_wireless_security_new (void);
+Creates a new NMSettingWirelessSecurity object with default values.
+
+Returns
+ the new empty NMSettingWirelessSecurity object. 
+[transfer full]
 
-
-
-NMSettingWirelessSecurityClass
-typedef struct {
-	NMSettingClass parent;
-
-	/* Padding for future expansion */
-	void (*_reserved1) (void);
-	void (*_reserved2) (void);
-	void (*_reserved3) (void);
-	void (*_reserved4) (void);
-} NMSettingWirelessSecurityClass;
-
-
-
 
 
 
-nm_setting_wireless_security_new ()
-NMSetting *         nm_setting_wireless_security_new    (void);
-
-Creates a new NMSettingWirelessSecurity object with default values.
-
-
+nm_setting_wireless_security_get_key_mgmt ()
+const char *
+nm_setting_wireless_security_get_key_mgmt
+                               (NMSettingWirelessSecurity *setting);
+
+Parameters
+
--+++
-
-
+
+
+
 





 
 Returns : the new empty NMSettingWirelessSecurity object. [transfer full]
- setting the NMSettingWirelessSecurity  
 
 
 
-
-
-nm_setting_wireless_security_get_key_mgmt ()
-const char *        nm_setting_wireless_security_get_key_mgmt
-                                                        (NMSettingWirelessSecurity *setting);
-
----
-
-
-
-
-
-
-
-
-
-
-


setting : the NMSettingWirelessSecurity
-
Returns : the "key-mgmt" property of the setting
+
+Returns
+ the “key-mgmt” property of the setting
+
+
 
 
 
-nm_setting_wireless_security_get_num_protos ()
-guint32             nm_setting_wireless_security_get_num_protos
-                                                        (NMSettingWirelessSecurity *setting);
-
+nm_setting_wireless_security_get_num_protos ()
+guint32
+nm_setting_wireless_security_get_num_protos
+                               (NMSettingWirelessSecurity *setting);
+
+Parameters
+
--+++
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
 





 setting : the NMSettingWirelessSecurity
-
Returns : the number of security protocols this connection allows when
-connecting to secure WiFi networks
setting the NMSettingWirelessSecurity  
 
 
+
+Returns
+ the number of security protocols this connection allows when
+connecting to secure WiFi networks
+
+
+
 
 
-nm_setting_wireless_security_get_proto ()
-const char *        nm_setting_wireless_security_get_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-
+nm_setting_wireless_security_get_proto ()
+const char *
+nm_setting_wireless_security_get_proto
+                               (NMSettingWirelessSecurity *setting,
+                                guint32 i);
+
+Parameters
+
--+++
-
-
-
-
-
-
+
+
+
-
-
+
+
+
 





 
 
 setting : the NMSettingWirelessSecurity
-
i : an index into the protocol list setting the NMSettingWirelessSecurity  
 
 Returns : the protocol at index i
- i an index into the protocol list  
 
 
 
 
+
+Returns
+ the protocol at index i
+
+
+
+
 
 
-nm_setting_wireless_security_add_proto ()
-gboolean            nm_setting_wireless_security_add_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         const char *proto);
-
-Adds a WiFi security protocol (one of "wpa" or "rsn") to the allowed list;
+
nm_setting_wireless_security_add_proto ()
+gboolean
+nm_setting_wireless_security_add_proto
+                               (NMSettingWirelessSecurity *setting,
+                                const char *proto);
+Adds a WiFi security protocol (one of "wpa" or "rsn") to the allowed list;
 only protocols in this list will be used when finding and connecting to
 the WiFi network specified by this connection.  For example, if the
 protocol list contains only "wpa" but the access point for the SSID specified
 by this connection only supports WPA2/RSN, the connection cannot be used
-with the access point.
-
-
+with the access point.
+
+Parameters
+
--+++
-
-
-
-
-
-
+
+
+
-
-
+
+
+
 





 
 
 setting : the NMSettingWirelessSecurity
-
proto : the protocol to add, one of "wpa" or "rsn" setting the NMSettingWirelessSecurity  
 
 Returns : 
-TRUE if the protocol was new and and was added to the allowed
-protocol list, or FALSE if it was already in the list proto the protocol to add, one of "wpa" or "rsn"  
 
 
 
 
+
+Returns
+ TRUE if the protocol was new and and was added to the allowed
+protocol list, or FALSE if it was already in the list
+
+
+
 
 
-nm_setting_wireless_security_remove_proto ()
-void                nm_setting_wireless_security_remove_proto
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);
-
-Removes a protocol from the allowed protocol list.
-
-
+nm_setting_wireless_security_remove_proto ()
+void
+nm_setting_wireless_security_remove_proto
+                               (NMSettingWirelessSecurity *setting,
+                                guint32 i);
+Removes a protocol from the allowed protocol list.
+
+Parameters
+
--+++
-
-
+
+
+
-
-
+
+
+
 





 
 
 setting : the NMSettingWirelessSecurity
- setting the NMSettingWirelessSecurity  
 
 i : index of the protocol to remove i index of the protocol to remove  
 
 
 
 
+
 
 
-nm_setting_wireless_security_clear_protos ()
-void                nm_setting_wireless_security_clear_protos
-                                                        (NMSettingWirelessSecurity *setting);
-
-Removes all protocols from the allowed list.  If there are no protocols
-specified then all protocols are allowed.
-
-
+nm_setting_wireless_security_clear_protos ()
+void
+nm_setting_wireless_security_clear_protos
+                               (NMSettingWirelessSecurity *setting);
+Removes all protocols from the allowed list.  If there are no protocols
+specified then all protocols are allowed.
+
+Parameters
+
--+++
-
-
+
+
+
 





 
 setting : the NMSettingWirelessSecurity
- setting the NMSettingWirelessSecurity  
 
 
 
+
 
 
-nm_setting_wireless_security_get_num_pairwise ()
-guint32             nm_setting_wireless_security_get_num_pairwise
-                                                        (NMSettingWirelessSecurity *setting);
-
+nm_setting_wireless_security_get_num_pairwise ()
+guint32
+nm_setting_wireless_security_get_num_pairwise
+                               (NMSettingWirelessSecurity *setting);
+
+Parameters
+
--+++
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
 





 setting : the NMSettingWirelessSecurity
-
Returns : the number of pairwise encryption algorithms in the allowed list
setting the NMSettingWirelessSecurity  
 
 
+
+Returns
+ the number of pairwise encryption algorithms in the allowed list
+
+
+

nm_setting_wireless_security_get_pairwise ()

const char *        nm_setting_wireless_security_get_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);

-Returns the allowed pairwise encryption algorithm from allowed algorithm -list. -

nm_setting_wireless_security_get_pairwise ()

const char *
+nm_setting_wireless_security_get_pairwise
+                               (NMSettingWirelessSecurity *setting,
+                                guint32 i);

Returns the allowed pairwise encryption algorithm from allowed algorithm +list.

Parameters

--+++ - - - - - - + + + - - + + +

`setting` :	the NMSettingWirelessSecurity -
`i` :	index of an item in the allowed pairwise encryption algorithm list	setting	the NMSettingWirelessSecurity
Returns :	the pairwise encryption algorithm at index `i` -	i	index of an item in the allowed pairwise encryption algorithm list

Returns

the pairwise encryption algorithm at index i +

nm_setting_wireless_security_add_pairwise ()

gboolean            nm_setting_wireless_security_add_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         const char *pairwise);

-Adds an encryption algorithm to the list of allowed pairwise encryption +

nm_setting_wireless_security_add_pairwise ()

gboolean
+nm_setting_wireless_security_add_pairwise
+                               (NMSettingWirelessSecurity *setting,
+                                const char *pairwise);

Adds an encryption algorithm to the list of allowed pairwise encryption algorithms. If the list is not empty, then only access points that support one or more of the encryption algorithms in the list will be considered -compatible with this connection. -

+compatible with this connection.

Parameters

--+++ - - - - - - + + + - - + + +

`setting` :	the NMSettingWirelessSecurity -
`pairwise` :	the encryption algorithm to add, one of "wep40", "wep104", -"tkip", or "ccmp"	setting	the NMSettingWirelessSecurity
Returns :	-`TRUE` if the algorithm was added to the list, `FALSE` if it was -already in the list	pairwise	the encryption algorithm to add, one of "wep40", "wep104", +"tkip", or "ccmp"

Returns

TRUE if the algorithm was added to the list, FALSE if it was +already in the list

nm_setting_wireless_security_remove_pairwise ()

void                nm_setting_wireless_security_remove_pairwise
-                                                        (NMSettingWirelessSecurity *setting,
-                                                         guint32 i);

-Removes an encryption algorithm from the allowed pairwise encryption -algorithm list. -

nm_setting_wireless_security_remove_pairwise ()

void
+nm_setting_wireless_security_remove_pairwise
+                               (NMSettingWirelessSecurity *setting,
+                                guint32 i);

Removes an encryption algorithm from the allowed pairwise encryption +algorithm list.

Parameters

--+++ - - + + + - - + + +

`setting` :	the NMSettingWirelessSecurity -	setting	the NMSettingWirelessSecurity
`i` :	the index of an item in the allowed pairwise encryption algorithm list	i	the index of an item in the allowed pairwise encryption algorithm list

Property Details

The `"auth-alg"` property

  "auth-alg"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_KEY_MGMT

#define NM_SETTING_WIRELESS_SECURITY_KEY_MGMT "key-mgmt"
+

-When WEP is used (ie, key-mgmt = 'none' or 'ieee8021x') indicate the -802.11 authentication algorithm required by the AP here. One of 'open' -for Open System, 'shared' for Shared Key, or 'leap' for Cisco LEAP. -When using Cisco LEAP (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap') -the 'leap-username' and 'leap-password' properties must be specified.

Default value: NULL

The `"group"` property

  "group"                    GSList_gchararray_*   : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX

#define NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX "wep-tx-keyidx"
+

-A list of group/broadcast encryption algorithms which prevents -connections to Wi-Fi networks that do not utilize one of the algorithms -in the list. For maximum compatibility leave this property empty. Each -list element may be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.

The `"key-mgmt"` property

  "key-mgmt"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_AUTH_ALG

#define NM_SETTING_WIRELESS_SECURITY_AUTH_ALG "auth-alg"
+

-Key management used for the connection. One of 'none' (WEP), 'ieee8021x' -(Dynamic WEP), 'wpa-none' (Ad-Hoc WPA-PSK), 'wpa-psk' (infrastructure -WPA-PSK), or 'wpa-eap' (WPA-Enterprise). This property must be set for -any WiFi connection that uses security.

Default value: NULL

The `"leap-password"` property

  "leap-password"            gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_PROTO

#define NM_SETTING_WIRELESS_SECURITY_PROTO "proto"
+

-The login password for legacy LEAP connections (ie, key-mgmt = -'ieee8021x' and auth-alg = 'leap').

Default value: NULL

The `"leap-password-flags"` property

  "leap-password-flags"      guint                 : Read / Write

NM_SETTING_WIRELESS_SECURITY_PAIRWISE

#define NM_SETTING_WIRELESS_SECURITY_PAIRWISE "pairwise"
+

-Flags indicating how to handle "leap-password".

Allowed values: <= 7

Default value: 0

The `"leap-username"` property

  "leap-username"            gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_GROUP

#define NM_SETTING_WIRELESS_SECURITY_GROUP "group"
+

-The login username for legacy LEAP connections (ie, key-mgmt = -'ieee8021x' and auth-alg = 'leap').

Default value: NULL

The `"pairwise"` property

  "pairwise"                 GSList_gchararray_*   : Read / Write

NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME

#define NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME "leap-username"
+

-A list of pairwise encryption algorithms which prevents connections to -Wi-Fi networks that do not utilize one of the algorithms in the list. For -maximum compatibility leave this property empty. Each list element may -be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.

The `"proto"` property

  "proto"                    GSList_gchararray_*   : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_KEY0

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY0 "wep-key0"
+

-List of strings specifying the allowed WPA protocol versions to use. -Each element may be one 'wpa' (allow WPA) or 'rsn' (allow WPA2/RSN). If -not specified, both WPA and RSN connections are allowed.

The `"psk"` property

  "psk"                      gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_KEY1

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY1 "wep-key1"
+

-Pre-Shared-Key for WPA networks. If the key is 64-characters long, it -must contain only hexadecimal characters and is interpreted as a -hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII -characters (as specified in the 802.11i standard) and is interpreted as -a WPA passphrase, and is hashed to derive the actual WPA-PSK used when -connecting to the WiFi network.

Default value: NULL

The `"psk-flags"` property

  "psk-flags"                guint                 : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_KEY2

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY2 "wep-key2"
+

-Flags indicating how to handle "psk"

Allowed values: <= 7

Default value: 0

The `"wep-key-flags"` property

  "wep-key-flags"            guint                 : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_KEY3

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY3 "wep-key3"
+

-Flags indicating how to handle NMSettingWirelessSecurity WEP keys.

Allowed values: <= 7

Default value: 0

The `"wep-key-type"` property

  "wep-key-type"             guint                 : Read / Write / Construct

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS "wep-key-flags"
+

-Controls the interpretation of WEP keys. Allowed values are those given -by NMWepKeyType. If set to 1 and the keys are hexadecimal, they must be -either 10 or 26 characters in length. If set to 1 and the keys are -ASCII keys, they must be either 5 or 13 characters in length. If set to -2, the passphrase is hashed using the de-facto MD5 method to derive the -actual WEP key.

Allowed values: <= 2

Default value: 0

The `"wep-key0"` property

  "wep-key0"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE

#define NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE "wep-key-type"
+

-Index 0 WEP key. This is the WEP key used in most networks. See the -'wep-key-type' property for a description of how this key is interpreted.

Default value: NULL

The `"wep-key1"` property

  "wep-key1"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_PSK

#define NM_SETTING_WIRELESS_SECURITY_PSK "psk"
+

-Index 1 WEP key. This WEP index is not used by most networks. See the -'wep-key-type' property for a description of how this key is interpreted.

Default value: NULL

The `"wep-key2"` property

  "wep-key2"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS

#define NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS "psk-flags"
+

-Index 2 WEP key. This WEP index is not used by most networks. See the -'wep-key-type' property for a description of how this key is interpreted.

Default value: NULL

The `"wep-key3"` property

  "wep-key3"                 gchar*                : Read / Write

NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD

#define NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD "leap-password"
+

-Index 3 WEP key. This WEP index is not used by most networks. See the -'wep-key-type' property for a description of how this key is interpreted.

Default value: NULL

The `"wep-tx-keyidx"` property

  "wep-tx-keyidx"            guint                 : Read / Write / Construct

NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS

#define NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS "leap-password-flags"
+

-When static WEP is used (ie, key-mgmt = 'none') and a non-default WEP key -index is used by the AP, put that WEP key index here. Valid values are 0 -(default key) through 3. Note that some consumer access points (like the -Linksys WRT54G) number the keys 1 - 4.

Property Details

The `“auth-alg”` property

  “auth-alg”                 gchar *

When WEP is used (ie, key-mgmt = 'none' or 'ieee8021x') indicate the 802.11 authentication algorithm required by the AP here. One of 'open' for Open System, 'shared' for Shared Key, or 'leap' for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap') the 'leap-username' and 'leap-password' properties must be specified.

Flags: Read / Write

Default value: NULL

The `“group”` property

  “group”                    GSList_gchararray_ *

A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.

Flags: Read / Write

The `“key-mgmt”` property

  “key-mgmt”                 gchar *

Key management used for the connection. One of 'none' (WEP), 'ieee8021x' (Dynamic WEP), 'wpa-none' (WPA-PSK Ad-Hoc), 'wpa-psk' (infrastructure WPA-PSK), or 'wpa-eap' (WPA-Enterprise). This property must be set for any WiFi connection that uses security.

Flags: Read / Write

Default value: NULL

The `“leap-password”` property

  “leap-password”            gchar *

The login password for legacy LEAP connections (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap').

Flags: Read / Write

Default value: NULL

The `“leap-password-flags”` property

  “leap-password-flags”      guint

Flags indicating how to handle the LEAP password.

Flags: Read / Write

Allowed values: <= 7

Default value: 0

The `“leap-username”` property

  “leap-username”            gchar *

The login username for legacy LEAP connections (ie, key-mgmt = 'ieee8021x' and auth-alg = 'leap').

Flags: Read / Write

Default value: NULL

The `“pairwise”` property

  “pairwise”                 GSList_gchararray_ *

A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of 'wep40', 'wep104', 'tkip' or 'ccmp'.

Flags: Read / Write

The `“proto”` property

  “proto”                    GSList_gchararray_ *

List of strings specifying the allowed WPA protocol versions to use. Each element may be one 'wpa' (allow WPA) or 'rsn' (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed.

Flags: Read / Write

The `“psk”` property

  “psk”                      gchar *

Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the WiFi network.

Flags: Read / Write

Default value: NULL

The `“psk-flags”` property

  “psk-flags”                guint

Flags indicating how to handle the WPA PSK key.

Flags: Read / Write

Allowed values: <= 7

Default value: 0

The `“wep-key-flags”` property

  “wep-key-flags”            guint

Flags indicating how to handle the WEP keys.

Flags: Read / Write

Allowed values: <= 7

Default value: 0

The `“wep-key-type”` property

  “wep-key-type”             guint

Controls the interpretation of WEP keys. Allowed values are 1 (interpret WEP keys as hexadecimal or ASCII keys) or 2 (interpret WEP keys as WEP Passphrases). If set to 1 and the keys are hexadecimal, they must be either 10 or 26 characters in length. If set to 1 and the keys are ASCII keys, they must be either 5 or 13 characters in length. If set to 2, the passphrase is hashed using the de-facto MD5 method to derive the actual WEP key.

Flags: Read / Write / Construct

Allowed values: <= 2

Default value: 0

The `“wep-key0”` property

  “wep-key0”                 gchar *

Index 0 WEP key. This is the WEP key used in most networks. See the 'wep-key-type' property for a description of how this key is interpreted.

Flags: Read / Write

Default value: NULL

The `“wep-key1”` property

  “wep-key1”                 gchar *

Index 1 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.

Flags: Read / Write

Default value: NULL

The `“wep-key2”` property

  “wep-key2”                 gchar *

Index 2 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.

Flags: Read / Write

Default value: NULL

The `“wep-key3”` property

  “wep-key3”                 gchar *

Index 3 WEP key. This WEP index is not used by most networks. See the 'wep-key-type' property for a description of how this key is interpreted.

Flags: Read / Write

Default value: NULL

The `“wep-tx-keyidx”` property

  “wep-tx-keyidx”            guint

When static WEP is used (ie, key-mgmt = 'none') and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.

Flags: Read / Write / Construct

Allowed values: <= 3

Default value: 0

@@ -1448,6 +1786,6 @@ Linksys WRT54G) number the keys 1 - 4.

`setting` :	the NMSettingWirelessSecurity +	NM_SETTING_WIRELESS_SECURITY_ERROR_UNKNOWN	+ unknown or unclassified error
`idx` :	the index of the key (0..3 inclusive)	NM_SETTING_WIRELESS_SECURITY_ERROR_INVALID_PROPERTY	+ the property was invalid +
`key` :	the WEP key as a string, in either hexadecimal, ASCII, or passphrase -form as determiend by the value of the "wep-key-type" -property.	NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_PROPERTY	+ the property was +missing and is required +

			libnm-util Reference Manual
-Top - \| - Description - \| - Object Hierarchy - \| - Properties -

`setting` :	the NMSettingWirelessSecurity -
`proto` :	the protocol to add, one of "wpa" or "rsn"	setting	the NMSettingWirelessSecurity
Returns :	-`TRUE` if the protocol was new and and was added to the allowed -protocol list, or `FALSE` if it was already in the list	proto	the protocol to add, one of "wpa" or "rsn"

`setting` :	the NMSettingWirelessSecurity -
`group` :	the encryption algorithm to add, one of "wep40", "wep104", -"tkip", or "ccmp"	setting	the NMSettingWirelessSecurity
Returns :	-`TRUE` if the algorithm was added to the list, `FALSE` if it was -already in the list	group	the encryption algorithm to add, one of "wep40", "wep104", +"tkip", or "ccmp"

`setting` :	the NMSettingWirelessSecurity +	NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME	+ LEAP authentication +was specified but no LEAP username was given
Returns :	the "auth-alg" property of the setting	NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP	+ Shared Key +authentication was specified but the setting did not specify WEP as the +encryption protocol +

`setting` :	the NMSettingWirelessSecurity +	NM_WEP_KEY_TYPE_UNKNOWN	+ unknown WEP key type
Returns :	the NMSettingSecretFlags pertaining to the all WEP keys	NM_WEP_KEY_TYPE_KEY	+ indicates a hexadecimal or ASCII formatted WEP key. +Hex keys are either 10 or 26 hexadecimal characters (ie "5f782f2f5f" or +"732f2d712e4a394a375d366931"), while ASCII keys are either 5 or 13 ASCII +characters (ie "abcde" or "blahblah99$*1"). +

`setting` :	the NMSettingWirelessSecurity +	NM_WEP_KEY_TYPE_PASSPHRASE	+ indicates a WEP passphrase (ex "I bought a duck +on my way back from the market 235Q&^%^*%") instead of a hexadecimal or ASCII +key. Passphrases are between 8 and 64 characters inclusive and are hashed +the actual WEP key using the MD5 hash algorithm.
Returns :	the "wep-key-type" property of the setting	NM_WEP_KEY_TYPE_LAST	+ placeholder value for bounds-checking +

Synopsis

Object Hierarchy

Properties

Description

Details

NM_SETTING_WIRELESS_SECURITY_SETTING_NAME

enum NMSettingWirelessSecurityError

Functions

NM_SETTING_WIRELESS_SECURITY_ERROR

nm_setting_wireless_security_error_quark ()

enum NMWepKeyType

Properties

NM_SETTING_WIRELESS_SECURITY_KEY_MGMT

NM_SETTING_WIRELESS_SECURITY_WEP_TX_KEYIDX

NM_SETTING_WIRELESS_SECURITY_AUTH_ALG

NM_SETTING_WIRELESS_SECURITY_PROTO

NM_SETTING_WIRELESS_SECURITY_PAIRWISE

NM_SETTING_WIRELESS_SECURITY_GROUP

NM_SETTING_WIRELESS_SECURITY_LEAP_USERNAME

NM_SETTING_WIRELESS_SECURITY_WEP_KEY0

NM_SETTING_WIRELESS_SECURITY_WEP_KEY1

NM_SETTING_WIRELESS_SECURITY_WEP_KEY2

NM_SETTING_WIRELESS_SECURITY_WEP_KEY3

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_FLAGS

Types and Values

NM_SETTING_WIRELESS_SECURITY_WEP_KEY_TYPE

Object Hierarchy

NM_SETTING_WIRELESS_SECURITY_PSK

Includes

NM_SETTING_WIRELESS_SECURITY_PSK_FLAGS

Description

Functions

NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD

nm_setting_wireless_security_error_quark ()

Returns

NM_SETTING_WIRELESS_SECURITY_LEAP_PASSWORD_FLAGS

NMSettingWirelessSecurity

nm_setting_wireless_security_new ()

Returns

NMSettingWirelessSecurityClass

nm_setting_wireless_security_new ()

nm_setting_wireless_security_get_key_mgmt ()

Parameters

nm_setting_wireless_security_get_key_mgmt ()

Returns

nm_setting_wireless_security_get_num_protos ()

nm_setting_wireless_security_get_num_protos ()

Parameters

Returns

nm_setting_wireless_security_get_proto ()

nm_setting_wireless_security_get_proto ()

Parameters

Returns

nm_setting_wireless_security_add_proto ()

nm_setting_wireless_security_add_proto ()

Parameters

Returns

nm_setting_wireless_security_remove_proto ()

nm_setting_wireless_security_remove_proto ()

Parameters

nm_setting_wireless_security_clear_protos ()

nm_setting_wireless_security_clear_protos ()

Parameters

nm_setting_wireless_security_get_num_pairwise ()

nm_setting_wireless_security_get_num_pairwise ()

Parameters

Returns

nm_setting_wireless_security_get_pairwise ()

nm_setting_wireless_security_get_pairwise ()

Parameters

Returns

nm_setting_wireless_security_add_pairwise ()

nm_setting_wireless_security_add_pairwise ()

Parameters

Returns

nm_setting_wireless_security_remove_pairwise ()

nm_setting_wireless_security_remove_pairwise ()

Parameters

nm_setting_wireless_security_clear_pairwise ()

nm_setting_wireless_security_clear_pairwise ()