NMSettingPPP

@@ -167,7 +167,7 @@ enum

nm_setting_ppp_error_quark ()

GQuark              nm_setting_ppp_error_quark          (void);

GQuark              nm_setting_ppp_error_quark          (void);

@@ -349,7 +349,7 @@ enum

nm_setting_ppp_get_type ()

GType               nm_setting_ppp_get_type             (void);

GType               nm_setting_ppp_get_type             (void);

@@ -379,7 +379,7 @@ enum

nm_setting_ppp_get_noauth ()

gboolean            nm_setting_ppp_get_noauth           (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_noauth           (NMSettingPPP *setting);

@@ -401,7 +401,7 @@ enum

nm_setting_ppp_get_refuse_eap ()

gboolean            nm_setting_ppp_get_refuse_eap       (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_refuse_eap       (NMSettingPPP *setting);

@@ -423,7 +423,7 @@ enum

nm_setting_ppp_get_refuse_pap ()

gboolean            nm_setting_ppp_get_refuse_pap       (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_refuse_pap       (NMSettingPPP *setting);

@@ -445,7 +445,7 @@ enum

nm_setting_ppp_get_refuse_chap ()

gboolean            nm_setting_ppp_get_refuse_chap      (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_refuse_chap      (NMSettingPPP *setting);

@@ -467,7 +467,7 @@ enum

nm_setting_ppp_get_refuse_mschap ()

gboolean            nm_setting_ppp_get_refuse_mschap    (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_refuse_mschap    (NMSettingPPP *setting);

@@ -489,7 +489,7 @@ enum

nm_setting_ppp_get_refuse_mschapv2 ()

gboolean            nm_setting_ppp_get_refuse_mschapv2  (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_refuse_mschapv2  (NMSettingPPP *setting);

@@ -511,7 +511,7 @@ enum

nm_setting_ppp_get_nobsdcomp ()

gboolean            nm_setting_ppp_get_nobsdcomp        (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_nobsdcomp        (NMSettingPPP *setting);

@@ -533,7 +533,7 @@ enum

nm_setting_ppp_get_nodeflate ()

gboolean            nm_setting_ppp_get_nodeflate        (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_nodeflate        (NMSettingPPP *setting);

@@ -555,7 +555,7 @@ enum

nm_setting_ppp_get_no_vj_comp ()

gboolean            nm_setting_ppp_get_no_vj_comp       (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_no_vj_comp       (NMSettingPPP *setting);

@@ -577,7 +577,7 @@ enum

nm_setting_ppp_get_require_mppe ()

gboolean            nm_setting_ppp_get_require_mppe     (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_require_mppe     (NMSettingPPP *setting);

@@ -599,7 +599,7 @@ enum

nm_setting_ppp_get_require_mppe_128 ()

gboolean            nm_setting_ppp_get_require_mppe_128 (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_require_mppe_128 (NMSettingPPP *setting);

@@ -621,7 +621,7 @@ enum

nm_setting_ppp_get_mppe_stateful ()

gboolean            nm_setting_ppp_get_mppe_stateful    (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_mppe_stateful    (NMSettingPPP *setting);

@@ -643,7 +643,7 @@ enum

nm_setting_ppp_get_crtscts ()

gboolean            nm_setting_ppp_get_crtscts          (NMSettingPPP *setting);

gboolean            nm_setting_ppp_get_crtscts          (NMSettingPPP *setting);

@@ -665,7 +665,7 @@ enum

nm_setting_ppp_get_baud ()

guint32             nm_setting_ppp_get_baud             (NMSettingPPP *setting);

guint32             nm_setting_ppp_get_baud             (NMSettingPPP *setting);

@@ -687,7 +687,7 @@ enum

nm_setting_ppp_get_mru ()

guint32             nm_setting_ppp_get_mru              (NMSettingPPP *setting);

guint32             nm_setting_ppp_get_mru              (NMSettingPPP *setting);

@@ -709,7 +709,7 @@ enum

nm_setting_ppp_get_mtu ()

guint32             nm_setting_ppp_get_mtu              (NMSettingPPP *setting);

guint32             nm_setting_ppp_get_mtu              (NMSettingPPP *setting);

@@ -731,7 +731,7 @@ enum

nm_setting_ppp_get_lcp_echo_failure ()

guint32             nm_setting_ppp_get_lcp_echo_failure (NMSettingPPP *setting);

guint32             nm_setting_ppp_get_lcp_echo_failure (NMSettingPPP *setting);

@@ -753,7 +753,7 @@ enum

nm_setting_ppp_get_lcp_echo_interval ()

guint32             nm_setting_ppp_get_lcp_echo_interval
+guint32             nm_setting_ppp_get_lcp_echo_interval
                                                         (NMSettingPPP *setting);
 
 
@@ -778,7 +778,7 @@ enum                Property Details
 
 The "baud" property
-  "baud"                     guint                 : Read / Write / Construct
+  "baud"                     guint                 : Read / Write / Construct
 
 If non-zero, instruct pppd to set the serial port to the specified
 baudrate.  This value should normally be left as 0 to automatically
@@ -789,7 +789,7 @@ choose the speed.
 

 
 The "crtscts" property
-  "crtscts"                  gboolean              : Read / Write / Construct
+  "crtscts"                  gboolean              : Read / Write / Construct
 
 If TRUE, specify that pppd should set the serial port to use hardware
 flow control with RTS and CTS signals.  This value should normally be
@@ -800,7 +800,7 @@ set to FALSE.
 

 
 The "lcp-echo-failure" property
-  "lcp-echo-failure"         guint                 : Read / Write / Construct
+  "lcp-echo-failure"         guint                 : Read / Write / Construct
 
 If non-zero, instruct pppd to presume the connection to the peer has
 failed if the specified number of LCP echo-requests go unanswered by the
@@ -812,7 +812,7 @@ value if this property is used.
 

 
 The "lcp-echo-interval" property
-  "lcp-echo-interval"        guint                 : Read / Write / Construct
+  "lcp-echo-interval"        guint                 : Read / Write / Construct
 
 If non-zero, instruct pppd to send an LCP echo-request frame to the peer
 every n seconds (where n is the specified value).  Note that some PPP
@@ -824,7 +824,7 @@ possible to autodetect this.
 

 
 The "mppe-stateful" property
-  "mppe-stateful"            gboolean              : Read / Write / Construct
+  "mppe-stateful"            gboolean              : Read / Write / Construct
 
 If TRUE, stateful MPPE is used.  See pppd documentation for more
 information on stateful MPPE.",
@@ -834,7 +834,7 @@ information on stateful MPPE.",
 

 
 The "mru" property
-  "mru"                      guint                 : Read / Write / Construct
+  "mru"                      guint                 : Read / Write / Construct
 
 If non-zero, instruct pppd to request that the peer send packets no
 larger than the specified size.  If non-zero, the MRU should be between
@@ -846,7 +846,7 @@ larger than the specified size.  If non-zero, the MRU should be between
 

 
 The "mtu" property
-  "mtu"                      guint                 : Read / Write / Construct
+  "mtu"                      guint                 : Read / Write / Construct
 
 If non-zero, instruct pppd to send packets no larger than the specified
 size.
@@ -856,7 +856,7 @@ size.
 

 
 The "no-vj-comp" property
-  "no-vj-comp"               gboolean              : Read / Write / Construct
+  "no-vj-comp"               gboolean              : Read / Write / Construct
 
 If TRUE, Van Jacobsen TCP header compression will not be requested.
 
@@ -865,7 +865,7 @@ If TRUE, Van Jacobsen TCP header compression will not be requested.
 
 
 The "noauth" property
-  "noauth"                   gboolean              : Read / Write / Construct
+  "noauth"                   gboolean              : Read / Write / Construct
 
 If TRUE, do not require the other side (usually the PPP server) to
 authenticate itself to the client.  If FALSE, require authentication from
@@ -876,7 +876,7 @@ the remote side.  In almost all cases, this should be TRUE.
 

 
 The "nobsdcomp" property
-  "nobsdcomp"                gboolean              : Read / Write / Construct
+  "nobsdcomp"                gboolean              : Read / Write / Construct
 
 If TRUE, BSD compression will not be requested.
 
@@ -885,7 +885,7 @@ If TRUE, BSD compression will not be requested.
 
 
 The "nodeflate" property
-  "nodeflate"                gboolean              : Read / Write / Construct
+  "nodeflate"                gboolean              : Read / Write / Construct
 
 If TRUE, 'deflate' compression will not be requested.
 
@@ -894,7 +894,7 @@ If TRUE, 'deflate' compression will not be requested.
 
 
 The "refuse-chap" property
-  "refuse-chap"              gboolean              : Read / Write / Construct
+  "refuse-chap"              gboolean              : Read / Write / Construct
 
 If TRUE, the CHAP authentication method will not be used.
 
@@ -903,7 +903,7 @@ If TRUE, the CHAP authentication method will not be used.
 
 
 The "refuse-eap" property
-  "refuse-eap"               gboolean              : Read / Write / Construct
+  "refuse-eap"               gboolean              : Read / Write / Construct
 
 If TRUE, the EAP authentication method will not be used.
 
@@ -912,7 +912,7 @@ If TRUE, the EAP authentication method will not be used.
 
 
 The "refuse-mschap" property
-  "refuse-mschap"            gboolean              : Read / Write / Construct
+  "refuse-mschap"            gboolean              : Read / Write / Construct
 
 If TRUE, the MSCHAP authentication method will not be used.
 
@@ -921,7 +921,7 @@ If TRUE, the MSCHAP authentication method will not be used.
 
 
 The "refuse-mschapv2" property
-  "refuse-mschapv2"          gboolean              : Read / Write / Construct
+  "refuse-mschapv2"          gboolean              : Read / Write / Construct
 
 If TRUE, the MSCHAPv2 authentication method will not be used.
 
@@ -930,7 +930,7 @@ If TRUE, the MSCHAPv2 authentication method will not be used.
 
 
 The "refuse-pap" property
-  "refuse-pap"               gboolean              : Read / Write / Construct
+  "refuse-pap"               gboolean              : Read / Write / Construct
 
 If TRUE, the PAP authentication method will not be used.
 
@@ -939,7 +939,7 @@ If TRUE, the PAP authentication method will not be used.
 
 
 The "require-mppe" property
-  "require-mppe"             gboolean              : Read / Write / Construct
+  "require-mppe"             gboolean              : Read / Write / Construct
 
 If TRUE, MPPE (Microsoft Point-to-Point Encrpytion) will be required for
 the PPP session.  If either 64-bit or 128-bit MPPE is not available the
@@ -951,7 +951,7 @@ connections.
 

 
 The "require-mppe-128" property
-  "require-mppe-128"         gboolean              : Read / Write / Construct
+  "require-mppe-128"         gboolean              : Read / Write / Construct
 
 If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encrpytion) will be
 required for the PPP session, and the 'require-mppe' property must also
@@ -963,6 +963,6 @@ be set to TRUE.  If 128-bit MPPE is not available the session will fail.
 
 
 
-          Generated by GTK-Doc V1.14
+          Generated by GTK-Doc V1.15
 
 
\ No newline at end of file
-- 
cgit 1.3.0-6-gf8a5

Object Hierarchy

Properties

nm_setting_ppp_error_quark ()

nm_setting_ppp_get_type ()

nm_setting_ppp_get_noauth ()

nm_setting_ppp_get_refuse_eap ()

nm_setting_ppp_get_refuse_pap ()

nm_setting_ppp_get_refuse_chap ()

nm_setting_ppp_get_refuse_mschap ()

nm_setting_ppp_get_refuse_mschapv2 ()

nm_setting_ppp_get_nobsdcomp ()

nm_setting_ppp_get_nodeflate ()

nm_setting_ppp_get_no_vj_comp ()

nm_setting_ppp_get_require_mppe ()

nm_setting_ppp_get_require_mppe_128 ()

nm_setting_ppp_get_mppe_stateful ()

nm_setting_ppp_get_crtscts ()

nm_setting_ppp_get_baud ()

nm_setting_ppp_get_mru ()

nm_setting_ppp_get_mtu ()

nm_setting_ppp_get_lcp_echo_failure ()

nm_setting_ppp_get_lcp_echo_interval ()

Property Details

The "baud" property

The "crtscts" property

The "lcp-echo-failure" property

The "lcp-echo-interval" property

The "mppe-stateful" property

The "mru" property

The "mtu" property

The "no-vj-comp" property

The "noauth" property

The "nobsdcomp" property

The "nodeflate" property

The "refuse-chap" property

The "refuse-eap" property

The "refuse-mschap" property

The "refuse-mschapv2" property

The "refuse-pap" property

The "require-mppe" property

The "require-mppe-128" property

The `"baud"` property

The `"crtscts"` property

The `"lcp-echo-failure"` property

The `"lcp-echo-interval"` property

The `"mppe-stateful"` property

The `"mru"` property

The `"mtu"` property

The `"no-vj-comp"` property

The `"noauth"` property

The `"nobsdcomp"` property

The `"nodeflate"` property

The `"refuse-chap"` property

The `"refuse-eap"` property

The `"refuse-mschap"` property

The `"refuse-mschapv2"` property

The `"refuse-pap"` property

The `"require-mppe"` property

The `"require-mppe-128"` property