From c2de0d98ba39e0a1a970d066fd19be786092f376 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Tue, 1 Mar 2016 16:55:22 +0100 Subject: Imported Upstream version 1.1.91 --- docs/api/html/index.html | 2 +- docs/api/html/ref-settings.html | 26 +- docs/api/html/spec.html | 763 +++++++++++++++++++++++++++------------- 3 files changed, 544 insertions(+), 247 deletions(-) (limited to 'docs/api/html') diff --git a/docs/api/html/index.html b/docs/api/html/index.html index aff2b5b7..054d41e2 100644 --- a/docs/api/html/index.html +++ b/docs/api/html/index.html @@ -14,7 +14,7 @@
-

Version 1.1.90 +

Version 1.1.91

Copyright © 2012 The NetworkManager Authors

diff --git a/docs/api/html/ref-settings.html b/docs/api/html/ref-settings.html index e3b8a8de..5bf9720a 100644 --- a/docs/api/html/ref-settings.html +++ b/docs/api/html/ref-settings.html @@ -1023,6 +1023,12 @@ Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'. Array of IPv4 address structures. Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet. +
dad-timeout
+
int32
+
-1
+Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network. If an address conflict is detected, the activation will fail. A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or 3 seconds). A value greater than zero is a timeout in milliseconds. + + 
dhcp-client-id
string

@@ -1048,7 +1054,7 @@
 
 
 
dhcp-timeout

-
uint32

+
int32

 
0

 A timeout for a DHCP transaction in seconds.
 
@@ -1169,6 +1175,12 @@
 Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet.
 
 
+
dad-timeout

+
int32

+
-1

+Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or 3 seconds).  A value greater than zero is a timeout in milliseconds.
+
+
 
dhcp-hostname

 
string

 

@@ -1181,6 +1193,12 @@
 If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
 
 
+
dhcp-timeout

+
int32

+
0

+A timeout for a DHCP transaction in seconds.
+
+
 
dns

 
array of byte array

 
[]

@@ -1864,7 +1882,7 @@
 
id

 
uint32

 
0

-The VLAN identifier that the interface created by this connection should be assigned.
+The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.
 
 
 
ingress-priority-map

@@ -1975,7 +1993,7 @@
 
 
ageing

 
uint32

-
0

+
300

 Specifies the lifetime in seconds of FDB entries learnt by the kernel.
 
 
@@ -2306,7 +2324,7 @@
 
powersave

 
uint32

 
0

-If set to FALSE, Wi-Fi power saving behavior is disabled.  If set to TRUE, Wi-Fi power saving behavior is enabled.  All other values are reserved.  Note that even though only boolean values are allowed, the property type is an unsigned integer to allow for future expansion.
+One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.
 
 
 
rate

diff --git a/docs/api/html/spec.html b/docs/api/html/spec.html
index dd4be9bf..990fd2ba 100644
--- a/docs/api/html/spec.html
+++ b/docs/api/html/spec.html
@@ -1,4 +1,4 @@
-NetworkManager D-Bus Interface Specification version 1.1.90
NetworkManager D-Bus Interface Specification
Version 1.1.90
Copyright (C) 2008 - 2011 Red Hat, Inc.
Copyright (C) 2008 - 2009 Novell, Inc.

+        
NetworkManager D-Bus Interface Specification
Version 1.1.91
Copyright (C) 2008 - 2016 Red Hat, Inc.
Copyright (C) 2008 - 2009 Novell, Inc.

 
This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
@@ -111,7 +111,7 @@ General Public License for more details.

 
You should have received a copy of the GNU Lesser General Public
 License along with this library; if not, write to the Free Software
 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

-
Interfaces

+
Interfaces

   
org.freedesktop.NetworkManager
Methods:
GetDevices (
         
         ) →
@@ -538,21 +538,66 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
NM_802_11_AP_SEC_NONE = 0x0
Null flag.
NM_802_11_AP_SEC_PAIR_WEP40 = 0x1
Access point supports pairwise 40-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_WEP104 = 0x2
Access point supports pairwise 104-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_TKIP = 0x4
Access point supports pairwise TKIP encryption.
NM_802_11_AP_SEC_PAIR_CCMP = 0x8
Access point supports pairwise CCMP encryption.
NM_802_11_AP_SEC_GROUP_WEP40 = 0x10
Access point supports a group 40-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_WEP104 = 0x20
Access point supports a group 104-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_TKIP = 0x40
Access point supports a group TKIP cipher.
NM_802_11_AP_SEC_GROUP_CCMP = 0x80
Access point supports a group CCMP cipher.
NM_802_11_AP_SEC_KEY_MGMT_PSK = 0x100
Access point supports PSK key management.
NM_802_11_AP_SEC_KEY_MGMT_802_1X = 0x200
Access point supports 802.1x key management.

 
   
org.freedesktop.NetworkManager.Device
Methods:
Reapply (
-        a{sa{sv}}: connection, u: flags
+        a{sa{sv}}: connection, t: version_id, u: flags
         ) →
         nothing

-        Attempts to update the configuration of a device without deactivating it.
-        You can either modify the configuration by passing the desired setup via "connection"
-        argument or just omit the argument to bring it in sync with the connection that
-        has been activated but could have been modified  since.
+        Attempts to update the configuration of a device without deactivating it. NetworkManager
+        has the concept of connections, which are profiles that contain the configuration for
+        a networking device. Those connections are exposed via D-Bus as individual objects
+        that can be created, modified and deleted. When activating such a settings-connection
+        on a device, the settings-connection is cloned to become an applied-connection and used to
+        configure the device (see GetAppliedConnection). Subsequent modification of the
+        settings-connection don't propagate automatically to the device's applied-connection
+        (with exception of the firewall-zone and the metered property). For the changes to take
+        effect, you can either re-activate the settings-connection, or call Reapply.
+        The Reapply call allows you to directly update the applied-connection and reconfigure
+        the device.
+        Reapply can also be useful if the currently applied-connection is equal to the connection
+        that is about to be reapplied. This allows to reconfigure the device and revert external
+        changes like removing or adding an IP address (which NetworkManager doesn't revert
+        automatically because it is assumed that the user made these changes intentionally outside
+        of NetworkManager).
+        Reapply can make the applied-connection different from the settings-connection,
+        just like updating the settings-connection can make them different.
       
Parameters
connection -
       a{sa{sv}}

-          The effective connection settings and properties to use. If empty, the connection
-          settings from the connection that is active on the device will be used.
+          The optional connection settings that will be reapplied on the device. If empty, the
+          currently active settings-connection will be used. The connection cannot arbitrarly
+          differ from the current applied-connection otherwise the call will fail.
+          Only certain changes are supported, like adding or removing IP addresses.
+        
version_id -
+      t

+          If non-zero, the current version id of the applied-connection must match.
+          The current version id can be retrieved via GetAppliedConnection.
+          This optional argument allows to catch concurrent modifications between
+          the GetAppliedConnection call and Reapply.
         
flags -
       u

           Flags which would modify the behavior of the Reapply call.
           There are no flags defined currently and the users should use the value of 0.
+        
GetAppliedConnection (
+        u: flags
+        ) →
+        a{sa{sv}}, t

+        Get the currently applied connection on the device. This is a snapshot of the last activated
+        connection on the device, that is the configuration that is currently applied on the device.
+        Usually this is the same as GetSettings of the referenced settings connection. However, it
+        can differ if the settings connection was subsequently modified or the applied connection was
+        modified by Reapply. The applied connection is set when activating a device or when calling
+        Reapply.
+      
Parameters
flags -
+      u

+          Flags which would modify the behavior of the GetAppliedConnection call.
+          There are no flags defined currently and the users should use the value of 0.
+        
Returns
connection -
+      a{sa{sv}}

+            The effective connection settings that the connection has currently applied.
+        
version_id -
+      t

+            The version-id of the currently applied connection. This can be specified during
+            Reapply to avoid races where you first fetch the applied connection, modify it
+            and try to reapply it. If the applied connection is modified in the meantime, the
+            version_id gets incremented and Reapply will fail.
         
Disconnect (
         
         ) →
@@ -939,6 +984,88 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

 
+  
org.freedesktop.NetworkManager.Device.Adsl
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
+    

+                A dictionary mapping property names to variant boxed values
+            
Properties:
Carrier -
+      b -
+      (read)

+        Indicates whether the physical carrier is found.
+      

+
+  
org.freedesktop.NetworkManager.Device.Bond
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
+    

+                A dictionary mapping property names to variant boxed values
+            
Properties:
HwAddress -
+      s -
+      (read)

+        Hardware address of the device.
+      
Carrier -
+      b -
+      (read)

+        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
+      
Slaves -
+      ao -
+      (read)

+        Array of object paths representing devices which are currently
+	slaved to this device.
+      

+
+  
org.freedesktop.NetworkManager.Device.Bridge
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
+    

+                A dictionary mapping property names to variant boxed values
+            
Properties:
HwAddress -
+      s -
+      (read)

+        Hardware address of the device.
+      
Carrier -
+      b -
+      (read)

+        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
+      
Slaves -
+      ao -
+      (read)

+        Array of object paths representing devices which are currently
+	slaved to this device.
+      

+
+  
org.freedesktop.NetworkManager.Device.Bluetooth
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
+    

+                A dictionary mapping property names to variant boxed values
+            
Properties:
HwAddress -
+      s -
+      (read)

+        Bluetooth hardware address of the device.
+      
Name -
+      s -
+      (read)

+        Bluetooth name of the device.
+      
BtCapabilities -
+      u -
+      (read)
+      (NM_BT_CAPABILITIES)
+    

+        Bluetooth capabilities of the device (either DUN or NAP).
+      
Sets of flags:
NM_BT_CAPABILITIES

+        Flags describing the capabilities of a Bluetooth device.
+      
NM_BT_CAPABILITY_NONE = 0x0
The device has no recognized capabilities.
NM_BT_CAPABILITY_DUN = 0x1
The device supports Bluetooth Dial-Up Networking.
NM_BT_CAPABILITY_PAN = 0x2
The device supports Bluetooth Personal Area Networking.

+
   
org.freedesktop.NetworkManager.Device.Wired
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
@@ -968,101 +1095,122 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

 
-  
org.freedesktop.NetworkManager.Device.Wireless
Methods:
GetAccessPoints (
-        
-        ) →
-        ao

-        DEPRECATED.  Get the list of access points visible to this device.  Note
-        that this list does not include access points which hide their SSID.  To
-        retrieve a list of all access points (including hidden ones) use the
-        GetAllAccessPoints() method.
-      
Returns
access_points -
-      ao

-          List of access point object paths.
-        
GetAllAccessPoints (
-        
-        ) →
-        ao

-        Get the list of all access points visible to this device, including
-        hidden ones for which the SSID is not yet known.
-      
Returns
access_points -
-      ao

-          List of access point object paths.
-        
RequestScan (
-        a{sv}: options
-        ) →
-        nothing

-        Request the device to scan
-      
Parameters
options -
-      a{sv}

-          Options of scan.
-          Currently 'ssids' option with value of "aay" type is supported.
-        
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Generic
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
-        )

-            Emitted when the wireless device's properties changed.
-        
Parameters
properties -
+        )
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

-                A dictionary containing the FIXME: check changed parameters.
-            
AccessPointAdded (
-        o: access_point
-        )

-            Emitted when a new access point is found by the device.
-        
Parameters
access_point -
-      o

-                The object path of the newly found access point.
-            
AccessPointRemoved (
-        o: access_point
-        )

-            Emitted when an access point disappears from view of the device.
-        
Parameters
access_point -
-      o

-                The object path of the access point that has disappeared.
+                A dictionary mapping property names to variant boxed values
             
Properties:
HwAddress -
       s -
       (read)

-        The active hardware address of the device.
-      
PermHwAddress -
+        Hardware address of the device.
+      
TypeDescription -
       s -
       (read)

-        The permanent hardware address of the device.
-      
Mode -
-      u -
-      (read)
-      (NM_802_11_MODE)
+        A (non-localized) description of the interface type, if known.
+      

+
+  
org.freedesktop.NetworkManager.Device.Infiniband
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
     

-        The operating mode of the wireless device.
-      
Bitrate -
-      u -
+                A dictionary mapping property names to variant boxed values
+            
Properties:
HwAddress -
+      s -
       (read)

-        The bit rate currently used by the wireless device, in kilobits/second (Kb/s).
-      
AccessPoints -
-      ao -
+        Hardware address of the device.
+      
Carrier -
+      b -
       (read)

-        List of object paths of access point visible to this wireless device.
-      
ActiveAccessPoint -
+        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
+      

+
+  
org.freedesktop.NetworkManager.Device.IPTunnel
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
+    

+                A dictionary mapping property names to variant boxed values
+            
Properties:
Mode -
+      u -
+      (read)

+        The tunneling mode.
+      
Parent -
       o -
       (read)

-        Object path of the access point currently used by the wireless device.
-      
WirelessCapabilities -
+        The object path of the parent device.
+      
Local -
+      s -
+      (read)

+        The local endpoint of the tunnel.
+      
Remote -
+      s -
+      (read)

+        The remote endpoint of the tunnel.
+      
Ttl -
+      y -
+      (read)

+        The TTL assigned to tunneled packets. 0 is a special value
+        meaning that packets inherit the TTL value
+      
Tos -
+      y -
+      (read)

+        The type of service (IPv4) or traffic class (IPv6) assigned to
+        tunneled packets.
+      
PathMtuDiscovery -
+      b -
+      (read)

+        Whether path MTU discovery is enabled on this tunnel.
+      
InputKey -
+      s -
+      (read)

+        The key used for incoming packets.
+      
OutputKey -
+      s -
+      (read)

+        The key used for outgoing packets.
+      
EncapsulationLimit -
+      y -
+      (read)

+        How many additional levels of encapsulation are permitted to
+        be prepended to packets. This property applies only to IPv6
+        tunnels.
+      
FlowLabel -
       u -
-      (read)
-      (NM_802_11_DEVICE_CAP)
+      (read)

+        The flow label to assign to tunnel packets. This property
+        applies only to IPv6 tunnels.
+      

+
+  
org.freedesktop.NetworkManager.Device.Macvlan
Interface has no methods.
Signals:
PropertiesChanged (
+        a{sv}: properties
+        )
Parameters
properties -
+      a{sv}
+      (String_Variant_Map)
     

-        The capabilities of the wireless device.
-      
Sets of flags:
NM_802_11_DEVICE_CAP

-        Flags describing the capabilities of a wireless device.
-      
NM_802_11_DEVICE_CAP_NONE = 0x0
Null capability - syntactic sugar for no capabilities supported.  Do not AND this with other capabilities!
NM_802_11_DEVICE_CAP_CIPHER_WEP40 = 0x1
The device supports the 40-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_WEP104 = 0x2
The device supports the 104-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_TKIP = 0x4
The device supports the TKIP cipher.
NM_802_11_DEVICE_CAP_CIPHER_CCMP = 0x8
The device supports the CCMP cipher.
NM_802_11_DEVICE_CAP_WPA = 0x10
The device supports the WPA encryption/authentication protocol.
NM_802_11_DEVICE_CAP_RSN = 0x20
The device supports the RSN encryption/authentication protocol.
NM_802_11_DEVICE_CAP_AP = 0x40
The device supports Access Point mode.
NM_802_11_DEVICE_CAP_ADHOC = 0x80
The device supports Ad-Hoc mode.
NM_802_11_DEVICE_CAP_FREQ_VALID = 0x100

-	  The device properly reports information about supported
-	  frequencies and thus both NM_802_11_DEVICE_CAP_FREQ_2GHZ and
-	  NM_802_11_DEVICE_CAP_FREQ_5GHZ are valid.
-	
NM_802_11_DEVICE_CAP_FREQ_2GHZ = 0x200

-          The device supports 2.4GHz frequencies.
-        
NM_802_11_DEVICE_CAP_FREQ_5GHZ = 0x400

-          The device supports 5GHz frequencies.
-        

+                A dictionary mapping property names to variant boxed values
+            
Properties:
Parent -
+      o -
+      (read)

+        The object path of the parent device.
+      
Mode -
+      s -
+      (read)

+        The macvlan mode, one of "private", "vepa", "bridge", or "passthru".
+      
NoPromisc -
+      b -
+      (read)

+        Whether the device is blocked from going into promiscuous mode.
+      
Tap -
+      b -
+      (read)

+        Whether the device is a macvtap.
+      

 
   
org.freedesktop.NetworkManager.Device.Modem
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
@@ -1103,31 +1251,6 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-  
org.freedesktop.NetworkManager.Device.Bluetooth
Interface has no methods.
Signals:
PropertiesChanged (
-        a{sv}: properties
-        )
Parameters
properties -
-      a{sv}
-      (String_Variant_Map)
-    

-                A dictionary mapping property names to variant boxed values
-            
Properties:
HwAddress -
-      s -
-      (read)

-        Bluetooth hardware address of the device.
-      
Name -
-      s -
-      (read)

-        Bluetooth name of the device.
-      
BtCapabilities -
-      u -
-      (read)
-      (NM_BT_CAPABILITIES)
-    

-        Bluetooth capabilities of the device (either DUN or NAP).
-      
Sets of flags:
NM_BT_CAPABILITIES

-        Flags describing the capabilities of a Bluetooth device.
-      
NM_BT_CAPABILITY_NONE = 0x0
The device has no recognized capabilities.
NM_BT_CAPABILITY_DUN = 0x1
The device supports Bluetooth Dial-Up Networking.
NM_BT_CAPABILITY_PAN = 0x2
The device supports Bluetooth Personal Area Networking.

-
   
org.freedesktop.NetworkManager.Device.OlpcMesh
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )

@@ -1151,83 +1274,7 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-  
org.freedesktop.NetworkManager.Device.WiMax
Methods:
GetNspList (
-        
-        ) →
-        ao

-        Get the list of NSPs visible to this device.
-      
Returns
nsps -
-      ao

-          List of NSP object paths
-        
Signals:
PropertiesChanged (
-        a{sv}: properties
-        )

-            Emitted when the WiMax device's properties changed.
-        
Parameters
properties -
-      a{sv}
-      (String_Variant_Map)
-    

-                A dictionary mapping property names to variant boxed values.
-            
NspAdded (
-        o: nsp
-        )

-            Emitted when a new NSP is found by the device.
-        
Parameters
nsp -
-      o

-                The object path of the newly found NSP.
-            
NspRemoved (
-        o: nsp
-        )

-            Emitted when an NSP disappears from view of the device.
-        
Parameters
nsp -
-      o

-                The object path of the NSP that has disappeared.
-            
Properties:
Nsps -
-      ao -
-      (read)

-        List of object paths of Network Service Providers (NSPs) visible to this
-        WiMAX device.
-      
HwAddress -
-      s -
-      (read)

-        Hardware address of the device.
-      
CenterFrequency -
-      u -
-      (read)

-        Center frequency (in KHz) of the radio channel the device is using to
-        communicate with the network when connected.  Has no meaning when the
-        device is not connected.
-      
Rssi -
-      i -
-      (read)

-        RSSI of the current radio link in dBm.  This value indicates how strong
-        the raw received RF signal from the base station is, but does not
-        indicate the overall quality of the radio link.  Has no meaning when the
-        device is not connected.
-      
Cinr -
-      i -
-      (read)

-        CINR (Carrier to Interference + Noise Ratio) of the current radio link
-        in dB.  CINR is a more accurate measure of radio link quality.  Has no
-        meaning when the device is not connected.
-      
TxPower -
-      i -
-      (read)

-        Average power of the last burst transmitted by the device, in units of
-        0.5 dBm.  i.e. a TxPower of -11 represents an actual device TX power of
-        -5.5 dBm.  Has no meaning when the device is not connected.
-      
Bsid -
-      s -
-      (read)

-        The ID of the serving base station as received from the network.  Has
-        no meaning when the device is not connected.
-      
ActiveNsp -
-      o -
-      (read)

-        Object path of the NSP currently used by the WiMax device.
-      

-
-  
org.freedesktop.NetworkManager.Device.Infiniband
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Team
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
       a{sv}
@@ -1242,53 +1289,68 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.b -
       (read)

         Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
+      
Slaves -
+      ao -
+      (read)

+        Array of object paths representing devices which are currently
+	slaved to this device.
       

 
-  
org.freedesktop.NetworkManager.Device.Bond
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Tun
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

                 A dictionary mapping property names to variant boxed values
-            
Properties:
HwAddress -
+            
Properties:
Owner -
+      x -
+      (read)

+        The uid of the tunnel owner, or -1 if it has no owner.
+      
Group -
+      x -
+      (read)

+        The gid of the tunnel group, or -1 if it has no owner.
+      
Mode -
       s -
       (read)

-        Hardware address of the device.
-      
Carrier -
+        The tunnel mode, either "tun" or "tap".
+      
NoPi -
       b -
       (read)

-        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
-      
Slaves -
-      ao -
+        The tunnel's "TUN_NO_PI" flag; true if no protocol info is
+	prepended to the tunnel packets.
+      
VnetHdr -
+      b -
       (read)

-        Array of object paths representing devices which are currently
-	slaved to this device.
+        The tunnel's "TUN_VNET_HDR" flag; true if the tunnel packets
+	include a virtio network header.
+      
MultiQueue -
+      b -
+      (read)

+        The tunnel's "TUN_TAP_MQ" flag; true if callers can connect to
+        the tap device multiple times, for multiple send/receive
+        queues.
+      
HwAddress -
+      s -
+      (read)

+        Hardware address of the device.
       

 
-  
org.freedesktop.NetworkManager.Device.Bridge
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Veth
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

                 A dictionary mapping property names to variant boxed values
-            
Properties:
HwAddress -
-      s -
-      (read)

-        Hardware address of the device.
-      
Carrier -
-      b -
-      (read)

-        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
-      
Slaves -
-      ao -
+            
Properties:
Peer -
+      o -
       (read)

-        Array of object paths representing devices which are currently
-	slaved to this device.
+        The object path of the device's peer.
       

 
-  
org.freedesktop.NetworkManager.Device.Team
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Vlan
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
       a{sv}
@@ -1303,66 +1365,274 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.b -
       (read)

         Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
-      
Slaves -
-      ao -
+      
Parent -
+      o -
       (read)

-        Array of object paths representing devices which are currently
-	slaved to this device.
+        Object path of the parent device of this VLAN device.
+      
VlanId -
+      u -
+      (read)

+        The VLAN ID of this VLAN interface.
       

 
-  
org.freedesktop.NetworkManager.Device.Generic
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Vxlan
Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

                 A dictionary mapping property names to variant boxed values
-            
Properties:
HwAddress -
+            
Properties:
Parent -
+      o -
+      (read)

+        The object path of the parent device (if the VXLAN is not
+	purely internal to this host).
+      
HwAddress -
       s -
       (read)

         Hardware address of the device.
-      
TypeDescription -
+      
Id -
+      u -
+      (read)

+        The VXLAN Network Identifier (VNI).
+      
Group -
       s -
       (read)

-        A (non-localized) description of the interface type, if known.
+        The IP (v4 or v6) multicast group used to communicate with other physical
+	hosts on this VXLAN.
+      
Local -
+      s -
+      (read)

+        The local IPv4 or IPv6 address to use when sending VXLAN packets to other
+	physical hosts.
+      
Tos -
+      y -
+      (read)

+        The value to use in the IP ToS field for VXLAN packets sent to
+	other physical hosts.
+      
Ttl -
+      y -
+      (read)

+        The value to use in the IP TTL field for VXLAN packets sent to
+	other physical hosts.
+      
Learning -
+      b -
+      (read)

+        True if the VXLAN dynamically learns remote IP addresses.
+      
Ageing -
+      u -
+      (read)

+        The interval in seconds at which the kernel purges stale
+        cached addresses.
+      
Limit -
+      u -
+      (read)

+        The maximum number of entries that can be added to the VXLAN's
+	forwarding table.
+      
DstPort -
+      q -
+      (read)

+        Destination port for outgoing VXLAN packets.
+      
SrcPortMin -
+      q -
+      (read)

+        The lowest source port number to use for outgoing VXLAN packets.
+      
SrcPortMax -
+      q -
+      (read)

+        The highest source port number to use for outgoing VXLAN packets.
+      
Proxy -
+      b -
+      (read)

+        True if the VXLAN is implementing DOVE ARP proxying for remote
+        clients.
+      
Rsc -
+      b -
+      (read)

+        True if the VXLAN is implementing DOVE route short-circuiting
+	of known remote IP addresses.
+      
L2miss -
+      b -
+      (read)

+        True if the VXLAN will emit netlink notifications of L2 switch
+        misses.
+      
L3miss -
+      b -
+      (read)

+        True if the VXLAN will emit netlink notifications of L3 switch
+        misses.
       

 
-  
org.freedesktop.NetworkManager.Device.Vlan
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.Wireless
Methods:
GetAccessPoints (
+        
+        ) →
+        ao

+        DEPRECATED.  Get the list of access points visible to this device.  Note
+        that this list does not include access points which hide their SSID.  To
+        retrieve a list of all access points (including hidden ones) use the
+        GetAllAccessPoints() method.
+      
Returns
access_points -
+      ao

+          List of access point object paths.
+        
GetAllAccessPoints (
+        
+        ) →
+        ao

+        Get the list of all access points visible to this device, including
+        hidden ones for which the SSID is not yet known.
+      
Returns
access_points -
+      ao

+          List of access point object paths.
+        
RequestScan (
+        a{sv}: options
+        ) →
+        nothing

+        Request the device to scan
+      
Parameters
options -
+      a{sv}

+          Options of scan.
+          Currently 'ssids' option with value of "aay" type is supported.
+        
Signals:
PropertiesChanged (
         a{sv}: properties
-        )
Parameters
properties -
+        )

+            Emitted when the wireless device's properties changed.
+        
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

-                A dictionary mapping property names to variant boxed values
+                A dictionary containing the FIXME: check changed parameters.
+            
AccessPointAdded (
+        o: access_point
+        )

+            Emitted when a new access point is found by the device.
+        
Parameters
access_point -
+      o

+                The object path of the newly found access point.
+            
AccessPointRemoved (
+        o: access_point
+        )

+            Emitted when an access point disappears from view of the device.
+        
Parameters
access_point -
+      o

+                The object path of the access point that has disappeared.
             
Properties:
HwAddress -
       s -
       (read)

-        Hardware address of the device.
-      
Carrier -
-      b -
+        The active hardware address of the device.
+      
PermHwAddress -
+      s -
       (read)

-        Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not).
-      
Parent -
+        The permanent hardware address of the device.
+      
Mode -
+      u -
+      (read)
+      (NM_802_11_MODE)
+    

+        The operating mode of the wireless device.
+      
Bitrate -
+      u -
+      (read)

+        The bit rate currently used by the wireless device, in kilobits/second (Kb/s).
+      
AccessPoints -
+      ao -
+      (read)

+        List of object paths of access point visible to this wireless device.
+      
ActiveAccessPoint -
       o -
       (read)

-        Object path of the parent device of this VLAN device.
-      
VlanId -
+        Object path of the access point currently used by the wireless device.
+      
WirelessCapabilities -
       u -
-      (read)

-        The VLAN ID of this VLAN interface.
-      

+      (read)
+      (NM_802_11_DEVICE_CAP)
+    

+        The capabilities of the wireless device.
+      
Sets of flags:
NM_802_11_DEVICE_CAP

+        Flags describing the capabilities of a wireless device.
+      
NM_802_11_DEVICE_CAP_NONE = 0x0
Null capability - syntactic sugar for no capabilities supported.  Do not AND this with other capabilities!
NM_802_11_DEVICE_CAP_CIPHER_WEP40 = 0x1
The device supports the 40-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_WEP104 = 0x2
The device supports the 104-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_TKIP = 0x4
The device supports the TKIP cipher.
NM_802_11_DEVICE_CAP_CIPHER_CCMP = 0x8
The device supports the CCMP cipher.
NM_802_11_DEVICE_CAP_WPA = 0x10
The device supports the WPA encryption/authentication protocol.
NM_802_11_DEVICE_CAP_RSN = 0x20
The device supports the RSN encryption/authentication protocol.
NM_802_11_DEVICE_CAP_AP = 0x40
The device supports Access Point mode.
NM_802_11_DEVICE_CAP_ADHOC = 0x80
The device supports Ad-Hoc mode.
NM_802_11_DEVICE_CAP_FREQ_VALID = 0x100

+	  The device properly reports information about supported
+	  frequencies and thus both NM_802_11_DEVICE_CAP_FREQ_2GHZ and
+	  NM_802_11_DEVICE_CAP_FREQ_5GHZ are valid.
+	
NM_802_11_DEVICE_CAP_FREQ_2GHZ = 0x200

+          The device supports 2.4GHz frequencies.
+        
NM_802_11_DEVICE_CAP_FREQ_5GHZ = 0x400

+          The device supports 5GHz frequencies.
+        

 
-  
org.freedesktop.NetworkManager.Device.Adsl
Interface has no methods.
Signals:
PropertiesChanged (
+  
org.freedesktop.NetworkManager.Device.WiMax
Methods:
GetNspList (
+        
+        ) →
+        ao

+        Get the list of NSPs visible to this device.
+      
Returns
nsps -
+      ao

+          List of NSP object paths
+        
Signals:
PropertiesChanged (
         a{sv}: properties
-        )
Parameters
properties -
+        )

+            Emitted when the WiMax device's properties changed.
+        
Parameters
properties -
       a{sv}
       (String_Variant_Map)
     

-                A dictionary mapping property names to variant boxed values
-            
Properties:
Carrier -
-      b -
+                A dictionary mapping property names to variant boxed values.
+            
NspAdded (
+        o: nsp
+        )

+            Emitted when a new NSP is found by the device.
+        
Parameters
nsp -
+      o

+                The object path of the newly found NSP.
+            
NspRemoved (
+        o: nsp
+        )

+            Emitted when an NSP disappears from view of the device.
+        
Parameters
nsp -
+      o

+                The object path of the NSP that has disappeared.
+            
Properties:
Nsps -
+      ao -
       (read)

-        Indicates whether the physical carrier is found.
+        List of object paths of Network Service Providers (NSPs) visible to this
+        WiMAX device.
+      
HwAddress -
+      s -
+      (read)

+        Hardware address of the device.
+      
CenterFrequency -
+      u -
+      (read)

+        Center frequency (in KHz) of the radio channel the device is using to
+        communicate with the network when connected.  Has no meaning when the
+        device is not connected.
+      
Rssi -
+      i -
+      (read)

+        RSSI of the current radio link in dBm.  This value indicates how strong
+        the raw received RF signal from the base station is, but does not
+        indicate the overall quality of the radio link.  Has no meaning when the
+        device is not connected.
+      
Cinr -
+      i -
+      (read)

+        CINR (Carrier to Interference + Noise Ratio) of the current radio link
+        in dB.  CINR is a more accurate measure of radio link quality.  Has no
+        meaning when the device is not connected.
+      
TxPower -
+      i -
+      (read)

+        Average power of the last burst transmitted by the device, in units of
+        0.5 dBm.  i.e. a TxPower of -11 represents an actual device TX power of
+        -5.5 dBm.  Has no meaning when the device is not connected.
+      
Bsid -
+      s -
+      (read)

+        The ID of the serving base station as received from the network.  Has
+        no meaning when the device is not connected.
+      
ActiveNsp -
+      o -
+      (read)

+        Object path of the NSP currently used by the WiMax device.
       

 
   
org.freedesktop.NetworkManager.WiMax.Nsp
Interface has no methods.
Signals:
PropertiesChanged (
@@ -1776,6 +2046,15 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.Interface has no methods.
Signals:
PropertiesChanged (
         a{sv}: properties
         )
Parameters
properties -
@@ -2481,7 +2760,7 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.Index
Index of interfaces
Index of types