From a54ac63bbf9b2c71026ac9028a8ffaf186cf3c82 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Sun, 28 Jun 2020 18:58:14 +0200 Subject: New upstream version 1.25.90 --- docs/api/html/NetworkManager.conf.html | 10 +- docs/api/html/NetworkManager.devhelp2 | 7 +- docs/api/html/NetworkManager.html | 2 +- ...dbus-org.freedesktop.NetworkManager.Device.html | 13 + docs/api/html/index.html | 7 +- docs/api/html/ix01.html | 1562 +++---- docs/api/html/manpages.html | 5 +- docs/api/html/nm-dbus-types.html | 45 + docs/api/html/nm-initrd-generator.html | 28 + docs/api/html/nm-openvswitch.html | 32 +- docs/api/html/nm-settings-dbus.html | 4091 +++++++++++++++++ docs/api/html/nm-settings-ifcfg-rh.html | 176 +- docs/api/html/nm-settings-keyfile.html | 28 +- docs/api/html/nm-settings-nmcli.html | 4660 ++++++++++++++++++++ docs/api/html/nm-settings.html | 3996 ----------------- docs/api/html/nmcli-examples.html | 4 +- docs/api/html/nmcli.html | 894 +--- docs/api/html/nmtui.html | 4 +- docs/api/html/settings-6lowpan.html | 2 +- docs/api/html/settings-802-11-olpc-mesh.html | 2 +- .../html/settings-802-11-wireless-security.html | 2 +- docs/api/html/settings-802-11-wireless.html | 4 +- docs/api/html/settings-802-1x.html | 2 +- docs/api/html/settings-802-3-ethernet.html | 2 +- docs/api/html/settings-adsl.html | 2 +- docs/api/html/settings-bluetooth.html | 2 +- docs/api/html/settings-bond.html | 2 +- docs/api/html/settings-bridge-port.html | 2 +- docs/api/html/settings-bridge.html | 58 +- docs/api/html/settings-cdma.html | 2 +- docs/api/html/settings-connection.html | 8 +- docs/api/html/settings-dcb.html | 2 +- docs/api/html/settings-dummy.html | 2 +- docs/api/html/settings-ethtool.html | 2 +- docs/api/html/settings-generic.html | 2 +- docs/api/html/settings-gsm.html | 2 +- docs/api/html/settings-infiniband.html | 2 +- docs/api/html/settings-ip-tunnel.html | 2 +- docs/api/html/settings-ipv4.html | 2 +- docs/api/html/settings-ipv6.html | 2 +- docs/api/html/settings-macsec.html | 2 +- docs/api/html/settings-macvlan.html | 2 +- docs/api/html/settings-match.html | 26 +- docs/api/html/settings-ovs-bridge.html | 2 +- docs/api/html/settings-ovs-dpdk.html | 2 +- docs/api/html/settings-ovs-interface.html | 2 +- docs/api/html/settings-ovs-patch.html | 4 +- docs/api/html/settings-ovs-port.html | 2 +- docs/api/html/settings-ppp.html | 2 +- docs/api/html/settings-pppoe.html | 2 +- docs/api/html/settings-proxy.html | 2 +- docs/api/html/settings-serial.html | 2 +- docs/api/html/settings-sriov.html | 2 +- docs/api/html/settings-tc.html | 2 +- docs/api/html/settings-team-port.html | 2 +- docs/api/html/settings-team.html | 2 +- docs/api/html/settings-tun.html | 2 +- docs/api/html/settings-user.html | 2 +- docs/api/html/settings-vlan.html | 2 +- docs/api/html/settings-vpn.html | 2 +- docs/api/html/settings-vrf.html | 2 +- docs/api/html/settings-vxlan.html | 2 +- docs/api/html/settings-wifi-p2p.html | 2 +- docs/api/html/settings-wimax.html | 2 +- docs/api/html/settings-wireguard.html | 2 +- docs/api/html/settings-wpan.html | 2 +- 66 files changed, 9972 insertions(+), 5778 deletions(-) create mode 100644 docs/api/html/nm-settings-dbus.html create mode 100644 docs/api/html/nm-settings-nmcli.html delete mode 100644 docs/api/html/nm-settings.html (limited to 'docs/api/html') diff --git a/docs/api/html/NetworkManager.conf.html b/docs/api/html/NetworkManager.conf.html index 491245d8..44b25c4c 100644 --- a/docs/api/html/NetworkManager.conf.html +++ b/docs/api/html/NetworkManager.conf.html @@ -610,7 +610,7 @@ ipv6.ip6-privacy=0

Not all properties can be overwritten, only the following properties are supported to have their default values configured - (see nm-settings(5) for details). + (see nm-settings(5) for details). A default value is only consulted if the corresponding per-connection value explicitly allows for that. @@ -640,6 +640,10 @@ ipv6.ip6-privacy=0 +

connection.mud-url

+

If unspecified, MUD URL defaults to "none".

+ +

connection.lldp

@@ -1324,7 +1328,7 @@ enable=nm-version-min:1.3,nm-version-min:1.2.6,nm-version-min:1.0.16 private keys in plain text, so it will be made readable only to root, and the plugin will ignore files that are readable or writable by any user or group other than root. See "Secret flag types" - in nm-settings(5) + in nm-settings(5) for how to avoid storing passwords in plain text.

@@ -1500,7 +1504,7 @@ interface-name:vboxnet*,except:interface-name:vboxnet2 nmcli(1), nmcli-examples(7), nm-online(1), - nm-settings(5), + nm-settings(5), nm-applet(1), nm-connection-editor(1)

diff --git a/docs/api/html/NetworkManager.devhelp2 b/docs/api/html/NetworkManager.devhelp2 index 44ee0fb0..c2c30fb7 100644 --- a/docs/api/html/NetworkManager.devhelp2 +++ b/docs/api/html/NetworkManager.devhelp2 @@ -7,7 +7,8 @@ - + + @@ -250,6 +251,7 @@ + @@ -646,6 +648,7 @@ + @@ -807,6 +810,7 @@ + @@ -815,6 +819,7 @@ + diff --git a/docs/api/html/NetworkManager.html b/docs/api/html/NetworkManager.html index 5fe94418..f25c6299 100644 --- a/docs/api/html/NetworkManager.html +++ b/docs/api/html/NetworkManager.html @@ -537,7 +537,7 @@ nmcli(1), nmcli-examples(7), nm-online(1), - nm-settings(5), + nm-settings(5), nm-applet(1), nm-connection-editor(1), udev(7) diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html index 6304f01a..8ab9bf5b 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html @@ -58,6 +58,7 @@

Properties

 Udi                   readable   s
+Path                  readable   s
 Interface             readable   s
 IpInterface           readable   s
 Driver                readable   s
@@ -260,6 +261,18 @@ Udi  readable   s
 
 

 

+
The "Path" property

+
+Path  readable   s
+

+
        The path of the device as exposed by the udev property ID_PATH.
+

+
        Note that non-UTF-8 characters are backslash escaped. Use g_strcompress()
+        to obtain the true (non-UTF-8) string.
+

+

+

+

 
The "Interface" property

 
 Interface  readable   s
diff --git a/docs/api/html/index.html b/docs/api/html/index.html
index 037994fe..cc94f9c9 100644
--- a/docs/api/html/index.html
+++ b/docs/api/html/index.html
@@ -16,7 +16,7 @@
 

 

 

-      for NetworkManager 1.24.2
+      for NetworkManager 1.25.90
 
       The latest version of this documentation can be found on-line at
       https://developer.gnome.org/NetworkManager/stable/.
@@ -86,7 +86,10 @@
 nmtui — Text User Interface for controlling NetworkManager
 
 

-nm-settings — Description of settings and properties of NetworkManager connection profiles
+nm-settings-dbus — Description of settings and properties of NetworkManager connection profiles on the D-Bus API
+

+

+nm-settings-nmcli — Description of settings and properties of NetworkManager connection profiles for nmcli
 

 

 nm-settings-keyfile — Description of keyfile settings plugin
diff --git a/docs/api/html/ix01.html b/docs/api/html/ix01.html
index 1ed543b4..4ba648fa 100644
--- a/docs/api/html/ix01.html
+++ b/docs/api/html/ix01.html
@@ -26,1647 +26,1677 @@
 

 
Symbols

 

-
org.freedesktop.NetworkManager.AccessPoint, org.freedesktop.NetworkManager.AccessPoint
+
org.freedesktop.NetworkManager.AccessPoint, org.freedesktop.NetworkManager.AccessPoint
 

-
org.freedesktop.NetworkManager.AccessPoint::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.AccessPoint::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.AccessPoint:Flags, The "Flags" property
+
org.freedesktop.NetworkManager.AccessPoint:Flags, The "Flags" property
 

-
org.freedesktop.NetworkManager.AccessPoint:Frequency, The "Frequency" property
+
org.freedesktop.NetworkManager.AccessPoint:Frequency, The "Frequency" property
 

-
org.freedesktop.NetworkManager.AccessPoint:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.AccessPoint:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.AccessPoint:LastSeen, The "LastSeen" property
+
org.freedesktop.NetworkManager.AccessPoint:LastSeen, The "LastSeen" property
 

-
org.freedesktop.NetworkManager.AccessPoint:MaxBitrate, The "MaxBitrate" property
+
org.freedesktop.NetworkManager.AccessPoint:MaxBitrate, The "MaxBitrate" property
 

-
org.freedesktop.NetworkManager.AccessPoint:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.AccessPoint:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.AccessPoint:RsnFlags, The "RsnFlags" property
+
org.freedesktop.NetworkManager.AccessPoint:RsnFlags, The "RsnFlags" property
 

-
org.freedesktop.NetworkManager.AccessPoint:Ssid, The "Ssid" property
+
org.freedesktop.NetworkManager.AccessPoint:Ssid, The "Ssid" property
 

-
org.freedesktop.NetworkManager.AccessPoint:Strength, The "Strength" property
+
org.freedesktop.NetworkManager.AccessPoint:Strength, The "Strength" property
 

-
org.freedesktop.NetworkManager.AccessPoint:WpaFlags, The "WpaFlags" property
+
org.freedesktop.NetworkManager.AccessPoint:WpaFlags, The "WpaFlags" property
 

-
org.freedesktop.NetworkManager.AgentManager, org.freedesktop.NetworkManager.AgentManager
+
org.freedesktop.NetworkManager.AgentManager, org.freedesktop.NetworkManager.AgentManager
 

-
org.freedesktop.NetworkManager.AgentManager.Register(), The Register() method
+
org.freedesktop.NetworkManager.AgentManager.Register(), The Register() method
 

-
org.freedesktop.NetworkManager.AgentManager.RegisterWithCapabilities(), The RegisterWithCapabilities() method
+
org.freedesktop.NetworkManager.AgentManager.RegisterWithCapabilities(), The RegisterWithCapabilities() method
 

-
org.freedesktop.NetworkManager.AgentManager.Unregister(), The Unregister() method
+
org.freedesktop.NetworkManager.AgentManager.Unregister(), The Unregister() method
 

-
org.freedesktop.NetworkManager.Device, org.freedesktop.NetworkManager.Device
+
org.freedesktop.NetworkManager.Device, org.freedesktop.NetworkManager.Device
 

-
org.freedesktop.NetworkManager.Device.Adsl, org.freedesktop.NetworkManager.Device.Adsl
+
org.freedesktop.NetworkManager.Device.Adsl, org.freedesktop.NetworkManager.Device.Adsl
 

-
org.freedesktop.NetworkManager.Device.Adsl::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Adsl::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Adsl:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Adsl:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Bluetooth, org.freedesktop.NetworkManager.Device.Bluetooth
+
org.freedesktop.NetworkManager.Device.Bluetooth, org.freedesktop.NetworkManager.Device.Bluetooth
 

-
org.freedesktop.NetworkManager.Device.Bluetooth::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Bluetooth::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Bluetooth:BtCapabilities, The "BtCapabilities" property
+
org.freedesktop.NetworkManager.Device.Bluetooth:BtCapabilities, The "BtCapabilities" property
 

-
org.freedesktop.NetworkManager.Device.Bluetooth:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Bluetooth:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Bluetooth:Name, The "Name" property
+
org.freedesktop.NetworkManager.Device.Bluetooth:Name, The "Name" property
 

-
org.freedesktop.NetworkManager.Device.Bond, org.freedesktop.NetworkManager.Device.Bond
+
org.freedesktop.NetworkManager.Device.Bond, org.freedesktop.NetworkManager.Device.Bond
 

-
org.freedesktop.NetworkManager.Device.Bond::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Bond::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Bond:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Bond:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Bond:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Bond:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Bond:Slaves, The "Slaves" property
+
org.freedesktop.NetworkManager.Device.Bond:Slaves, The "Slaves" property
 

-
org.freedesktop.NetworkManager.Device.Bridge, org.freedesktop.NetworkManager.Device.Bridge
+
org.freedesktop.NetworkManager.Device.Bridge, org.freedesktop.NetworkManager.Device.Bridge
 

-
org.freedesktop.NetworkManager.Device.Bridge::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Bridge::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Bridge:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Bridge:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Bridge:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Bridge:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Bridge:Slaves, The "Slaves" property
+
org.freedesktop.NetworkManager.Device.Bridge:Slaves, The "Slaves" property
 

-
org.freedesktop.NetworkManager.Device.Delete(), The Delete() method
+
org.freedesktop.NetworkManager.Device.Delete(), The Delete() method
 

-
org.freedesktop.NetworkManager.Device.Disconnect(), The Disconnect() method
+
org.freedesktop.NetworkManager.Device.Disconnect(), The Disconnect() method
 

-
org.freedesktop.NetworkManager.Device.Dummy, org.freedesktop.NetworkManager.Device.Dummy
+
org.freedesktop.NetworkManager.Device.Dummy, org.freedesktop.NetworkManager.Device.Dummy
 

-
org.freedesktop.NetworkManager.Device.Dummy::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Dummy::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Dummy:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Dummy:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Generic, org.freedesktop.NetworkManager.Device.Generic
+
org.freedesktop.NetworkManager.Device.Generic, org.freedesktop.NetworkManager.Device.Generic
 

-
org.freedesktop.NetworkManager.Device.Generic::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Generic::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Generic:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Generic:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Generic:TypeDescription, The "TypeDescription" property
+
org.freedesktop.NetworkManager.Device.Generic:TypeDescription, The "TypeDescription" property
 

-
org.freedesktop.NetworkManager.Device.GetAppliedConnection(), The GetAppliedConnection() method
+
org.freedesktop.NetworkManager.Device.GetAppliedConnection(), The GetAppliedConnection() method
 

-
org.freedesktop.NetworkManager.Device.Infiniband, org.freedesktop.NetworkManager.Device.Infiniband
+
org.freedesktop.NetworkManager.Device.Infiniband, org.freedesktop.NetworkManager.Device.Infiniband
 

-
org.freedesktop.NetworkManager.Device.Infiniband::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Infiniband::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Infiniband:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Infiniband:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Infiniband:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Infiniband:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel, org.freedesktop.NetworkManager.Device.IPTunnel
+
org.freedesktop.NetworkManager.Device.IPTunnel, org.freedesktop.NetworkManager.Device.IPTunnel
 

-
org.freedesktop.NetworkManager.Device.IPTunnel::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.IPTunnel::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:EncapsulationLimit, The "EncapsulationLimit" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:EncapsulationLimit, The "EncapsulationLimit" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Flags, The "Flags" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Flags, The "Flags" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:FlowLabel, The "FlowLabel" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:FlowLabel, The "FlowLabel" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:InputKey, The "InputKey" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:InputKey, The "InputKey" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Local, The "Local" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Local, The "Local" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:OutputKey, The "OutputKey" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:OutputKey, The "OutputKey" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:PathMtuDiscovery, The "PathMtuDiscovery" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:PathMtuDiscovery, The "PathMtuDiscovery" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Remote, The "Remote" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Remote, The "Remote" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Tos, The "Tos" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Tos, The "Tos" property
 

-
org.freedesktop.NetworkManager.Device.IPTunnel:Ttl, The "Ttl" property
+
org.freedesktop.NetworkManager.Device.IPTunnel:Ttl, The "Ttl" property
 

-
org.freedesktop.NetworkManager.Device.Lowpan, org.freedesktop.NetworkManager.Device.Lowpan
+
org.freedesktop.NetworkManager.Device.Lowpan, org.freedesktop.NetworkManager.Device.Lowpan
 

-
org.freedesktop.NetworkManager.Device.Lowpan:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Lowpan:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Lowpan:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.Lowpan:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.Macsec, org.freedesktop.NetworkManager.Device.Macsec
+
org.freedesktop.NetworkManager.Device.Macsec, org.freedesktop.NetworkManager.Device.Macsec
 

-
org.freedesktop.NetworkManager.Device.Macsec::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Macsec::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Macsec:CipherSuite, The "CipherSuite" property
+
org.freedesktop.NetworkManager.Device.Macsec:CipherSuite, The "CipherSuite" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:EncodingSa, The "EncodingSa" property
+
org.freedesktop.NetworkManager.Device.Macsec:EncodingSa, The "EncodingSa" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Encrypt, The "Encrypt" property
+
org.freedesktop.NetworkManager.Device.Macsec:Encrypt, The "Encrypt" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Es, The "Es" property
+
org.freedesktop.NetworkManager.Device.Macsec:Es, The "Es" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:IcvLength, The "IcvLength" property
+
org.freedesktop.NetworkManager.Device.Macsec:IcvLength, The "IcvLength" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:IncludeSci, The "IncludeSci" property
+
org.freedesktop.NetworkManager.Device.Macsec:IncludeSci, The "IncludeSci" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.Macsec:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Protect, The "Protect" property
+
org.freedesktop.NetworkManager.Device.Macsec:Protect, The "Protect" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:ReplayProtect, The "ReplayProtect" property
+
org.freedesktop.NetworkManager.Device.Macsec:ReplayProtect, The "ReplayProtect" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Scb, The "Scb" property
+
org.freedesktop.NetworkManager.Device.Macsec:Scb, The "Scb" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Sci, The "Sci" property
+
org.freedesktop.NetworkManager.Device.Macsec:Sci, The "Sci" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Validation, The "Validation" property
+
org.freedesktop.NetworkManager.Device.Macsec:Validation, The "Validation" property
 

-
org.freedesktop.NetworkManager.Device.Macsec:Window, The "Window" property
+
org.freedesktop.NetworkManager.Device.Macsec:Window, The "Window" property
 

-
org.freedesktop.NetworkManager.Device.Macvlan, org.freedesktop.NetworkManager.Device.Macvlan
+
org.freedesktop.NetworkManager.Device.Macvlan, org.freedesktop.NetworkManager.Device.Macvlan
 

-
org.freedesktop.NetworkManager.Device.Macvlan::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Macvlan::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Macvlan:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.Device.Macvlan:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.Device.Macvlan:NoPromisc, The "NoPromisc" property
+
org.freedesktop.NetworkManager.Device.Macvlan:NoPromisc, The "NoPromisc" property
 

-
org.freedesktop.NetworkManager.Device.Macvlan:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.Macvlan:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.Macvlan:Tap, The "Tap" property
+
org.freedesktop.NetworkManager.Device.Macvlan:Tap, The "Tap" property
 

-
org.freedesktop.NetworkManager.Device.Modem, org.freedesktop.NetworkManager.Device.Modem
+
org.freedesktop.NetworkManager.Device.Modem, org.freedesktop.NetworkManager.Device.Modem
 

-
org.freedesktop.NetworkManager.Device.Modem::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Modem::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Modem:Apn, The "Apn" property
+
org.freedesktop.NetworkManager.Device.Modem:Apn, The "Apn" property
 

-
org.freedesktop.NetworkManager.Device.Modem:CurrentCapabilities, The "CurrentCapabilities" property
+
org.freedesktop.NetworkManager.Device.Modem:CurrentCapabilities, The "CurrentCapabilities" property
 

-
org.freedesktop.NetworkManager.Device.Modem:DeviceId, The "DeviceId" property
+
org.freedesktop.NetworkManager.Device.Modem:DeviceId, The "DeviceId" property
 

-
org.freedesktop.NetworkManager.Device.Modem:ModemCapabilities, The "ModemCapabilities" property
+
org.freedesktop.NetworkManager.Device.Modem:ModemCapabilities, The "ModemCapabilities" property
 

-
org.freedesktop.NetworkManager.Device.Modem:OperatorCode, The "OperatorCode" property
+
org.freedesktop.NetworkManager.Device.Modem:OperatorCode, The "OperatorCode" property
 

-
org.freedesktop.NetworkManager.Device.OlpcMesh, org.freedesktop.NetworkManager.Device.OlpcMesh
+
org.freedesktop.NetworkManager.Device.OlpcMesh, org.freedesktop.NetworkManager.Device.OlpcMesh
 

-
org.freedesktop.NetworkManager.Device.OlpcMesh::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.OlpcMesh::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.OlpcMesh:ActiveChannel, The "ActiveChannel" property
+
org.freedesktop.NetworkManager.Device.OlpcMesh:ActiveChannel, The "ActiveChannel" property
 

-
org.freedesktop.NetworkManager.Device.OlpcMesh:Companion, The "Companion" property
+
org.freedesktop.NetworkManager.Device.OlpcMesh:Companion, The "Companion" property
 

-
org.freedesktop.NetworkManager.Device.OlpcMesh:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.OlpcMesh:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.OvsBridge, org.freedesktop.NetworkManager.Device.OvsBridge
+
org.freedesktop.NetworkManager.Device.OvsBridge, org.freedesktop.NetworkManager.Device.OvsBridge
 

-
org.freedesktop.NetworkManager.Device.OvsBridge::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.OvsBridge::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.OvsBridge:Slaves, The "Slaves" property
+
org.freedesktop.NetworkManager.Device.OvsBridge:Slaves, The "Slaves" property
 

-
org.freedesktop.NetworkManager.Device.OvsInterface, org.freedesktop.NetworkManager.Device.OvsInterface
+
org.freedesktop.NetworkManager.Device.OvsInterface, org.freedesktop.NetworkManager.Device.OvsInterface
 

-
org.freedesktop.NetworkManager.Device.OvsInterface::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.OvsInterface::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.OvsPort, org.freedesktop.NetworkManager.Device.OvsPort
+
org.freedesktop.NetworkManager.Device.OvsPort, org.freedesktop.NetworkManager.Device.OvsPort
 

-
org.freedesktop.NetworkManager.Device.OvsPort::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.OvsPort::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.OvsPort:Slaves, The "Slaves" property
+
org.freedesktop.NetworkManager.Device.OvsPort:Slaves, The "Slaves" property
 

-
org.freedesktop.NetworkManager.Device.Ppp, org.freedesktop.NetworkManager.Device.Ppp
+
org.freedesktop.NetworkManager.Device.Ppp, org.freedesktop.NetworkManager.Device.Ppp
 

-
org.freedesktop.NetworkManager.Device.Ppp::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Ppp::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Reapply(), The Reapply() method
+
org.freedesktop.NetworkManager.Device.Reapply(), The Reapply() method
 

-
org.freedesktop.NetworkManager.Device.Statistics, org.freedesktop.NetworkManager.Device.Statistics
+
org.freedesktop.NetworkManager.Device.Statistics, org.freedesktop.NetworkManager.Device.Statistics
 

-
org.freedesktop.NetworkManager.Device.Statistics::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Statistics::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Statistics:RefreshRateMs, The "RefreshRateMs" property
+
org.freedesktop.NetworkManager.Device.Statistics:RefreshRateMs, The "RefreshRateMs" property
 

-
org.freedesktop.NetworkManager.Device.Statistics:RxBytes, The "RxBytes" property
+
org.freedesktop.NetworkManager.Device.Statistics:RxBytes, The "RxBytes" property
 

-
org.freedesktop.NetworkManager.Device.Statistics:TxBytes, The "TxBytes" property
+
org.freedesktop.NetworkManager.Device.Statistics:TxBytes, The "TxBytes" property
 

-
org.freedesktop.NetworkManager.Device.Team, org.freedesktop.NetworkManager.Device.Team
+
org.freedesktop.NetworkManager.Device.Team, org.freedesktop.NetworkManager.Device.Team
 

-
org.freedesktop.NetworkManager.Device.Team::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Team::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Team:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Team:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Team:Config, The "Config" property
+
org.freedesktop.NetworkManager.Device.Team:Config, The "Config" property
 

-
org.freedesktop.NetworkManager.Device.Team:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Team:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Team:Slaves, The "Slaves" property
+
org.freedesktop.NetworkManager.Device.Team:Slaves, The "Slaves" property
 

-
org.freedesktop.NetworkManager.Device.Tun, org.freedesktop.NetworkManager.Device.Tun
+
org.freedesktop.NetworkManager.Device.Tun, org.freedesktop.NetworkManager.Device.Tun
 

-
org.freedesktop.NetworkManager.Device.Tun::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Tun::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Tun:Group, The "Group" property
+
org.freedesktop.NetworkManager.Device.Tun:Group, The "Group" property
 

-
org.freedesktop.NetworkManager.Device.Tun:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Tun:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Tun:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.Device.Tun:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.Device.Tun:MultiQueue, The "MultiQueue" property
+
org.freedesktop.NetworkManager.Device.Tun:MultiQueue, The "MultiQueue" property
 

-
org.freedesktop.NetworkManager.Device.Tun:NoPi, The "NoPi" property
+
org.freedesktop.NetworkManager.Device.Tun:NoPi, The "NoPi" property
 

-
org.freedesktop.NetworkManager.Device.Tun:Owner, The "Owner" property
+
org.freedesktop.NetworkManager.Device.Tun:Owner, The "Owner" property
 

-
org.freedesktop.NetworkManager.Device.Tun:VnetHdr, The "VnetHdr" property
+
org.freedesktop.NetworkManager.Device.Tun:VnetHdr, The "VnetHdr" property
 

-
org.freedesktop.NetworkManager.Device.Veth, org.freedesktop.NetworkManager.Device.Veth
+
org.freedesktop.NetworkManager.Device.Veth, org.freedesktop.NetworkManager.Device.Veth
 

-
org.freedesktop.NetworkManager.Device.Veth::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Veth::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Veth:Peer, The "Peer" property
+
org.freedesktop.NetworkManager.Device.Veth:Peer, The "Peer" property
 

-
org.freedesktop.NetworkManager.Device.Vlan, org.freedesktop.NetworkManager.Device.Vlan
+
org.freedesktop.NetworkManager.Device.Vlan, org.freedesktop.NetworkManager.Device.Vlan
 

-
org.freedesktop.NetworkManager.Device.Vlan::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Vlan::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Vlan:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Vlan:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Vlan:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Vlan:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Vlan:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.Vlan:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.Vlan:VlanId, The "VlanId" property
+
org.freedesktop.NetworkManager.Device.Vlan:VlanId, The "VlanId" property
 

-
org.freedesktop.NetworkManager.Device.Vrf, org.freedesktop.NetworkManager.Device.Vrf
+
org.freedesktop.NetworkManager.Device.Vrf, org.freedesktop.NetworkManager.Device.Vrf
 

-
org.freedesktop.NetworkManager.Device.Vrf:Table, The "Table" property
+
org.freedesktop.NetworkManager.Device.Vrf:Table, The "Table" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan, org.freedesktop.NetworkManager.Device.Vxlan
+
org.freedesktop.NetworkManager.Device.Vxlan, org.freedesktop.NetworkManager.Device.Vxlan
 

-
org.freedesktop.NetworkManager.Device.Vxlan::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Vxlan::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Ageing, The "Ageing" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Ageing, The "Ageing" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:DstPort, The "DstPort" property
+
org.freedesktop.NetworkManager.Device.Vxlan:DstPort, The "DstPort" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Group, The "Group" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Group, The "Group" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Vxlan:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Id, The "Id" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Id, The "Id" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:L2miss, The "L2miss" property
+
org.freedesktop.NetworkManager.Device.Vxlan:L2miss, The "L2miss" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:L3miss, The "L3miss" property
+
org.freedesktop.NetworkManager.Device.Vxlan:L3miss, The "L3miss" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Learning, The "Learning" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Learning, The "Learning" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Limit, The "Limit" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Limit, The "Limit" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Local, The "Local" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Local, The "Local" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Parent, The "Parent" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Parent, The "Parent" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Proxy, The "Proxy" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Proxy, The "Proxy" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Rsc, The "Rsc" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Rsc, The "Rsc" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMax, The "SrcPortMax" property
+
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMax, The "SrcPortMax" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMin, The "SrcPortMin" property
+
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMin, The "SrcPortMin" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Tos, The "Tos" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Tos, The "Tos" property
 

-
org.freedesktop.NetworkManager.Device.Vxlan:Ttl, The "Ttl" property
+
org.freedesktop.NetworkManager.Device.Vxlan:Ttl, The "Ttl" property
 

-
org.freedesktop.NetworkManager.Device.WireGuard, org.freedesktop.NetworkManager.Device.WireGuard
+
org.freedesktop.NetworkManager.Device.WireGuard, org.freedesktop.NetworkManager.Device.WireGuard
 

-
org.freedesktop.NetworkManager.Device.WireGuard:FwMark, The "FwMark" property
+
org.freedesktop.NetworkManager.Device.WireGuard:FwMark, The "FwMark" property
 

-
org.freedesktop.NetworkManager.Device.WireGuard:ListenPort, The "ListenPort" property
+
org.freedesktop.NetworkManager.Device.WireGuard:ListenPort, The "ListenPort" property
 

-
org.freedesktop.NetworkManager.Device.WireGuard:PublicKey, The "PublicKey" property
+
org.freedesktop.NetworkManager.Device.WireGuard:PublicKey, The "PublicKey" property
 

-
org.freedesktop.NetworkManager.Device.Wpan, org.freedesktop.NetworkManager.Device.Wpan
+
org.freedesktop.NetworkManager.Device.Wpan, org.freedesktop.NetworkManager.Device.Wpan
 

-
org.freedesktop.NetworkManager.Device.Wpan:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Wpan:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device::StateChanged, The "StateChanged" signal
+
org.freedesktop.NetworkManager.Device::StateChanged, The "StateChanged" signal
 

-
org.freedesktop.NetworkManager.Device:ActiveConnection, The "ActiveConnection" property
+
org.freedesktop.NetworkManager.Device:ActiveConnection, The "ActiveConnection" property
 

-
org.freedesktop.NetworkManager.Device:Autoconnect, The "Autoconnect" property
+
org.freedesktop.NetworkManager.Device:Autoconnect, The "Autoconnect" property
 

-
org.freedesktop.NetworkManager.Device:AvailableConnections, The "AvailableConnections" property
+
org.freedesktop.NetworkManager.Device:AvailableConnections, The "AvailableConnections" property
 

-
org.freedesktop.NetworkManager.Device:Capabilities, The "Capabilities" property
+
org.freedesktop.NetworkManager.Device:Capabilities, The "Capabilities" property
 

-
org.freedesktop.NetworkManager.Device:DeviceType, The "DeviceType" property
+
org.freedesktop.NetworkManager.Device:DeviceType, The "DeviceType" property
 

-
org.freedesktop.NetworkManager.Device:Dhcp4Config, The "Dhcp4Config" property
+
org.freedesktop.NetworkManager.Device:Dhcp4Config, The "Dhcp4Config" property
 

-
org.freedesktop.NetworkManager.Device:Dhcp6Config, The "Dhcp6Config" property
+
org.freedesktop.NetworkManager.Device:Dhcp6Config, The "Dhcp6Config" property
 

-
org.freedesktop.NetworkManager.Device:Driver, The "Driver" property
+
org.freedesktop.NetworkManager.Device:Driver, The "Driver" property
 

-
org.freedesktop.NetworkManager.Device:DriverVersion, The "DriverVersion" property
+
org.freedesktop.NetworkManager.Device:DriverVersion, The "DriverVersion" property
 

-
org.freedesktop.NetworkManager.Device:FirmwareMissing, The "FirmwareMissing" property
+
org.freedesktop.NetworkManager.Device:FirmwareMissing, The "FirmwareMissing" property
 

-
org.freedesktop.NetworkManager.Device:FirmwareVersion, The "FirmwareVersion" property
+
org.freedesktop.NetworkManager.Device:FirmwareVersion, The "FirmwareVersion" property
 

-
org.freedesktop.NetworkManager.Device:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device:Interface, The "Interface" property
+
org.freedesktop.NetworkManager.Device:Interface, The "Interface" property
 

-
org.freedesktop.NetworkManager.Device:InterfaceFlags, The "InterfaceFlags" property
+
org.freedesktop.NetworkManager.Device:InterfaceFlags, The "InterfaceFlags" property
 

-
org.freedesktop.NetworkManager.Device:Ip4Address, The "Ip4Address" property
+
org.freedesktop.NetworkManager.Device:Ip4Address, The "Ip4Address" property
 

-
org.freedesktop.NetworkManager.Device:Ip4Config, The "Ip4Config" property
+
org.freedesktop.NetworkManager.Device:Ip4Config, The "Ip4Config" property
 

-
org.freedesktop.NetworkManager.Device:Ip4Connectivity, The "Ip4Connectivity" property
+
org.freedesktop.NetworkManager.Device:Ip4Connectivity, The "Ip4Connectivity" property
 

-
org.freedesktop.NetworkManager.Device:Ip6Config, The "Ip6Config" property
+
org.freedesktop.NetworkManager.Device:Ip6Config, The "Ip6Config" property
 

-
org.freedesktop.NetworkManager.Device:Ip6Connectivity, The "Ip6Connectivity" property
+
org.freedesktop.NetworkManager.Device:Ip6Connectivity, The "Ip6Connectivity" property
 

-
org.freedesktop.NetworkManager.Device:IpInterface, The "IpInterface" property
+
org.freedesktop.NetworkManager.Device:IpInterface, The "IpInterface" property
 

-
org.freedesktop.NetworkManager.Device:LldpNeighbors, The "LldpNeighbors" property
+
org.freedesktop.NetworkManager.Device:LldpNeighbors, The "LldpNeighbors" property
 

-
org.freedesktop.NetworkManager.Device:Managed, The "Managed" property
+
org.freedesktop.NetworkManager.Device:Managed, The "Managed" property
 

-
org.freedesktop.NetworkManager.Device:Metered, The "Metered" property
+
org.freedesktop.NetworkManager.Device:Metered, The "Metered" property
 

-
org.freedesktop.NetworkManager.Device:Mtu, The "Mtu" property
+
org.freedesktop.NetworkManager.Device:Mtu, The "Mtu" property
 

-
org.freedesktop.NetworkManager.Device:NmPluginMissing, The "NmPluginMissing" property
+
org.freedesktop.NetworkManager.Device:NmPluginMissing, The "NmPluginMissing" property
 

-
org.freedesktop.NetworkManager.Device:PhysicalPortId, The "PhysicalPortId" property
+
org.freedesktop.NetworkManager.Device:Path, The "Path" property
 

-
org.freedesktop.NetworkManager.Device:Real, The "Real" property
+
org.freedesktop.NetworkManager.Device:PhysicalPortId, The "PhysicalPortId" property
 

-
org.freedesktop.NetworkManager.Device:State, The "State" property
+
org.freedesktop.NetworkManager.Device:Real, The "Real" property
 

-
org.freedesktop.NetworkManager.Device:StateReason, The "StateReason" property
+
org.freedesktop.NetworkManager.Device:State, The "State" property
 

-
org.freedesktop.NetworkManager.Device:Udi, The "Udi" property
+
org.freedesktop.NetworkManager.Device:StateReason, The "StateReason" property
 

-
org.freedesktop.NetworkManager.DnsManager, org.freedesktop.NetworkManager.DnsManager
+
org.freedesktop.NetworkManager.Device:Udi, The "Udi" property
 

-
org.freedesktop.NetworkManager.DnsManager:Configuration, The "Configuration" property
+
org.freedesktop.NetworkManager.DnsManager, org.freedesktop.NetworkManager.DnsManager
 

-
org.freedesktop.NetworkManager.DnsManager:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.DnsManager:Configuration, The "Configuration" property
 

-
org.freedesktop.NetworkManager.DnsManager:RcManager, The "RcManager" property
+
org.freedesktop.NetworkManager.DnsManager:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.IP4Config, org.freedesktop.NetworkManager.IP4Config
+
org.freedesktop.NetworkManager.DnsManager:RcManager, The "RcManager" property
 

-
org.freedesktop.NetworkManager.IP4Config::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.IP4Config, org.freedesktop.NetworkManager.IP4Config
 

-
org.freedesktop.NetworkManager.IP4Config:AddressData, The "AddressData" property
+
org.freedesktop.NetworkManager.IP4Config::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.IP4Config:Addresses, The "Addresses" property
+
org.freedesktop.NetworkManager.IP4Config:AddressData, The "AddressData" property
 

-
org.freedesktop.NetworkManager.IP4Config:DnsOptions, The "DnsOptions" property
+
org.freedesktop.NetworkManager.IP4Config:Addresses, The "Addresses" property
 

-
org.freedesktop.NetworkManager.IP4Config:DnsPriority, The "DnsPriority" property
+
org.freedesktop.NetworkManager.IP4Config:DnsOptions, The "DnsOptions" property
 

-
org.freedesktop.NetworkManager.IP4Config:Domains, The "Domains" property
+
org.freedesktop.NetworkManager.IP4Config:DnsPriority, The "DnsPriority" property
 

-
org.freedesktop.NetworkManager.IP4Config:Gateway, The "Gateway" property
+
org.freedesktop.NetworkManager.IP4Config:Domains, The "Domains" property
 

-
org.freedesktop.NetworkManager.IP4Config:NameserverData, The "NameserverData" property
+
org.freedesktop.NetworkManager.IP4Config:Gateway, The "Gateway" property
 

-
org.freedesktop.NetworkManager.IP4Config:Nameservers, The "Nameservers" property
+
org.freedesktop.NetworkManager.IP4Config:NameserverData, The "NameserverData" property
 

-
org.freedesktop.NetworkManager.IP4Config:RouteData, The "RouteData" property
+
org.freedesktop.NetworkManager.IP4Config:Nameservers, The "Nameservers" property
 

-
org.freedesktop.NetworkManager.IP4Config:Routes, The "Routes" property
+
org.freedesktop.NetworkManager.IP4Config:RouteData, The "RouteData" property
 

-
org.freedesktop.NetworkManager.IP4Config:Searches, The "Searches" property
+
org.freedesktop.NetworkManager.IP4Config:Routes, The "Routes" property
 

-
org.freedesktop.NetworkManager.IP4Config:WinsServerData, The "WinsServerData" property
+
org.freedesktop.NetworkManager.IP4Config:Searches, The "Searches" property
 

-
org.freedesktop.NetworkManager.IP4Config:WinsServers, The "WinsServers" property
+
org.freedesktop.NetworkManager.IP4Config:WinsServerData, The "WinsServerData" property
 

-
org.freedesktop.NetworkManager.IP6Config, org.freedesktop.NetworkManager.IP6Config
+
org.freedesktop.NetworkManager.IP4Config:WinsServers, The "WinsServers" property
 

-
org.freedesktop.NetworkManager.IP6Config::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.IP6Config, org.freedesktop.NetworkManager.IP6Config
 

-
org.freedesktop.NetworkManager.IP6Config:AddressData, The "AddressData" property
+
org.freedesktop.NetworkManager.IP6Config::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.IP6Config:Addresses, The "Addresses" property
+
org.freedesktop.NetworkManager.IP6Config:AddressData, The "AddressData" property
 

-
org.freedesktop.NetworkManager.IP6Config:DnsOptions, The "DnsOptions" property
+
org.freedesktop.NetworkManager.IP6Config:Addresses, The "Addresses" property
 

-
org.freedesktop.NetworkManager.IP6Config:DnsPriority, The "DnsPriority" property
+
org.freedesktop.NetworkManager.IP6Config:DnsOptions, The "DnsOptions" property
 

-
org.freedesktop.NetworkManager.IP6Config:Domains, The "Domains" property
+
org.freedesktop.NetworkManager.IP6Config:DnsPriority, The "DnsPriority" property
 

-
org.freedesktop.NetworkManager.IP6Config:Gateway, The "Gateway" property
+
org.freedesktop.NetworkManager.IP6Config:Domains, The "Domains" property
 

-
org.freedesktop.NetworkManager.IP6Config:Nameservers, The "Nameservers" property
+
org.freedesktop.NetworkManager.IP6Config:Gateway, The "Gateway" property
 

-
org.freedesktop.NetworkManager.IP6Config:RouteData, The "RouteData" property
+
org.freedesktop.NetworkManager.IP6Config:Nameservers, The "Nameservers" property
 

-
org.freedesktop.NetworkManager.IP6Config:Routes, The "Routes" property
+
org.freedesktop.NetworkManager.IP6Config:RouteData, The "RouteData" property
 

-
org.freedesktop.NetworkManager.IP6Config:Searches, The "Searches" property
+
org.freedesktop.NetworkManager.IP6Config:Routes, The "Routes" property
 

-
org.freedesktop.NetworkManager.SecretAgent, org.freedesktop.NetworkManager.SecretAgent
+
org.freedesktop.NetworkManager.IP6Config:Searches, The "Searches" property
 

-
org.freedesktop.NetworkManager.SecretAgent.CancelGetSecrets(), The CancelGetSecrets() method
+
org.freedesktop.NetworkManager.SecretAgent, org.freedesktop.NetworkManager.SecretAgent
 

-
org.freedesktop.NetworkManager.SecretAgent.DeleteSecrets(), The DeleteSecrets() method
+
org.freedesktop.NetworkManager.SecretAgent.CancelGetSecrets(), The CancelGetSecrets() method
 

-
org.freedesktop.NetworkManager.SecretAgent.GetSecrets(), The GetSecrets() method
+
org.freedesktop.NetworkManager.SecretAgent.DeleteSecrets(), The DeleteSecrets() method
 

-
org.freedesktop.NetworkManager.SecretAgent.SaveSecrets(), The SaveSecrets() method
+
org.freedesktop.NetworkManager.SecretAgent.GetSecrets(), The GetSecrets() method
 

-
org.freedesktop.NetworkManager.Settings, org.freedesktop.NetworkManager.Settings
+
org.freedesktop.NetworkManager.SecretAgent.SaveSecrets(), The SaveSecrets() method
 

-
org.freedesktop.NetworkManager.Settings.AddConnection(), The AddConnection() method
+
org.freedesktop.NetworkManager.Settings, org.freedesktop.NetworkManager.Settings
 

-
org.freedesktop.NetworkManager.Settings.AddConnection2(), The AddConnection2() method
+
org.freedesktop.NetworkManager.Settings.AddConnection(), The AddConnection() method
 

-
org.freedesktop.NetworkManager.Settings.AddConnectionUnsaved(), The AddConnectionUnsaved() method
+
org.freedesktop.NetworkManager.Settings.AddConnection2(), The AddConnection2() method
 

-
org.freedesktop.NetworkManager.Settings.Connection, org.freedesktop.NetworkManager.Settings.Connection
+
org.freedesktop.NetworkManager.Settings.AddConnectionUnsaved(), The AddConnectionUnsaved() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.ClearSecrets(), The ClearSecrets() method
+
org.freedesktop.NetworkManager.Settings.Connection, org.freedesktop.NetworkManager.Settings.Connection
 

-
org.freedesktop.NetworkManager.Settings.Connection.Delete(), The Delete() method
+
org.freedesktop.NetworkManager.Settings.Connection.ClearSecrets(), The ClearSecrets() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.GetSecrets(), The GetSecrets() method
+
org.freedesktop.NetworkManager.Settings.Connection.Delete(), The Delete() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.GetSettings(), The GetSettings() method
+
org.freedesktop.NetworkManager.Settings.Connection.GetSecrets(), The GetSecrets() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.Save(), The Save() method
+
org.freedesktop.NetworkManager.Settings.Connection.GetSettings(), The GetSettings() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.Update(), The Update() method
+
org.freedesktop.NetworkManager.Settings.Connection.Save(), The Save() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.Update2(), The Update2() method
+
org.freedesktop.NetworkManager.Settings.Connection.Update(), The Update() method
 

-
org.freedesktop.NetworkManager.Settings.Connection.UpdateUnsaved(), The UpdateUnsaved() method
+
org.freedesktop.NetworkManager.Settings.Connection.Update2(), The Update2() method
 

-
org.freedesktop.NetworkManager.Settings.Connection::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Settings.Connection.UpdateUnsaved(), The UpdateUnsaved() method
 

-
org.freedesktop.NetworkManager.Settings.Connection::Removed, The "Removed" signal
+
org.freedesktop.NetworkManager.Settings.Connection::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Settings.Connection::Updated, The "Updated" signal
+
org.freedesktop.NetworkManager.Settings.Connection::Removed, The "Removed" signal
 

-
org.freedesktop.NetworkManager.Settings.Connection:Filename, The "Filename" property
+
org.freedesktop.NetworkManager.Settings.Connection::Updated, The "Updated" signal
 

-
org.freedesktop.NetworkManager.Settings.Connection:Flags, The "Flags" property
+
org.freedesktop.NetworkManager.Settings.Connection:Filename, The "Filename" property
 

-
org.freedesktop.NetworkManager.Settings.Connection:Unsaved, The "Unsaved" property
+
org.freedesktop.NetworkManager.Settings.Connection:Flags, The "Flags" property
 

-
org.freedesktop.NetworkManager.Settings.GetConnectionByUuid(), The GetConnectionByUuid() method
+
org.freedesktop.NetworkManager.Settings.Connection:Unsaved, The "Unsaved" property
 

-
org.freedesktop.NetworkManager.Settings.ListConnections(), The ListConnections() method
+
org.freedesktop.NetworkManager.Settings.GetConnectionByUuid(), The GetConnectionByUuid() method
 

-
org.freedesktop.NetworkManager.Settings.LoadConnections(), The LoadConnections() method
+
org.freedesktop.NetworkManager.Settings.ListConnections(), The ListConnections() method
 

-
org.freedesktop.NetworkManager.Settings.ReloadConnections(), The ReloadConnections() method
+
org.freedesktop.NetworkManager.Settings.LoadConnections(), The LoadConnections() method
 

-
org.freedesktop.NetworkManager.Settings.SaveHostname(), The SaveHostname() method
+
org.freedesktop.NetworkManager.Settings.ReloadConnections(), The ReloadConnections() method
 

-
org.freedesktop.NetworkManager.Settings::ConnectionRemoved, The "ConnectionRemoved" signal
+
org.freedesktop.NetworkManager.Settings.SaveHostname(), The SaveHostname() method
 

-
org.freedesktop.NetworkManager.Settings::NewConnection, The "NewConnection" signal
+
org.freedesktop.NetworkManager.Settings::ConnectionRemoved, The "ConnectionRemoved" signal
 

-
org.freedesktop.NetworkManager.Settings::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Settings::NewConnection, The "NewConnection" signal
 

-
org.freedesktop.NetworkManager.Settings:CanModify, The "CanModify" property
+
org.freedesktop.NetworkManager.Settings::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Settings:Connections, The "Connections" property
+
org.freedesktop.NetworkManager.Settings:CanModify, The "CanModify" property
 

-
org.freedesktop.NetworkManager.Settings:Hostname, The "Hostname" property
+
org.freedesktop.NetworkManager.Settings:Connections, The "Connections" property
+

+
org.freedesktop.NetworkManager.Settings:Hostname, The "Hostname" property
 

 

 

 

 
A

 

-
org.freedesktop.NetworkManager.Connection.Active, org.freedesktop.NetworkManager.Connection.Active
+
org.freedesktop.NetworkManager.Connection.Active, org.freedesktop.NetworkManager.Connection.Active
 

-
org.freedesktop.NetworkManager.Connection.Active::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Connection.Active::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Connection.Active::StateChanged, The "StateChanged" signal
+
org.freedesktop.NetworkManager.Connection.Active::StateChanged, The "StateChanged" signal
 

-
org.freedesktop.NetworkManager.Connection.Active:Connection, The "Connection" property
+
org.freedesktop.NetworkManager.Connection.Active:Connection, The "Connection" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Default, The "Default" property
+
org.freedesktop.NetworkManager.Connection.Active:Default, The "Default" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Default6, The "Default6" property
+
org.freedesktop.NetworkManager.Connection.Active:Default6, The "Default6" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Devices, The "Devices" property
+
org.freedesktop.NetworkManager.Connection.Active:Devices, The "Devices" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Dhcp4Config, The "Dhcp4Config" property
+
org.freedesktop.NetworkManager.Connection.Active:Dhcp4Config, The "Dhcp4Config" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Dhcp6Config, The "Dhcp6Config" property
+
org.freedesktop.NetworkManager.Connection.Active:Dhcp6Config, The "Dhcp6Config" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Id, The "Id" property
+
org.freedesktop.NetworkManager.Connection.Active:Id, The "Id" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Ip4Config, The "Ip4Config" property
+
org.freedesktop.NetworkManager.Connection.Active:Ip4Config, The "Ip4Config" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Ip6Config, The "Ip6Config" property
+
org.freedesktop.NetworkManager.Connection.Active:Ip6Config, The "Ip6Config" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Master, The "Master" property
+
org.freedesktop.NetworkManager.Connection.Active:Master, The "Master" property
 

-
org.freedesktop.NetworkManager.Connection.Active:SpecificObject, The "SpecificObject" property
+
org.freedesktop.NetworkManager.Connection.Active:SpecificObject, The "SpecificObject" property
 

-
org.freedesktop.NetworkManager.Connection.Active:State, The "State" property
+
org.freedesktop.NetworkManager.Connection.Active:State, The "State" property
 

-
org.freedesktop.NetworkManager.Connection.Active:StateFlags, The "StateFlags" property
+
org.freedesktop.NetworkManager.Connection.Active:StateFlags, The "StateFlags" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Type, The "Type" property
+
org.freedesktop.NetworkManager.Connection.Active:Type, The "Type" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Uuid, The "Uuid" property
+
org.freedesktop.NetworkManager.Connection.Active:Uuid, The "Uuid" property
 

-
org.freedesktop.NetworkManager.Connection.Active:Vpn, The "Vpn" property
+
org.freedesktop.NetworkManager.Connection.Active:Vpn, The "Vpn" property
 

-
addr-gen-mode, ipv6
+
addr-gen-mode, ipv6
 

-
address-data, ipv4, ipv6
+
address-data, ipv4, ipv6
 

-
addresses, ipv4, ipv6
+
addresses, ipv4, ipv6
 

-
ageing, vxlan
+
ageing, vxlan
 

-
ageing-time, bridge
+
ageing-time, bridge
 

-
altsubject-matches, 802-1x
+
altsubject-matches, 802-1x
 

-
anonymous-identity, 802-1x
+
anonymous-identity, 802-1x
 

-
apn, gsm
+
apn, gsm
 

-
app-fcoe-flags, dcb
+
app-fcoe-flags, dcb
 

-
app-fcoe-mode, dcb
+
app-fcoe-mode, dcb
 

-
app-fcoe-priority, dcb
+
app-fcoe-priority, dcb
 

-
app-fip-flags, dcb
+
app-fip-flags, dcb
 

-
app-fip-priority, dcb
+
app-fip-priority, dcb
 

-
app-iscsi-flags, dcb
+
app-iscsi-flags, dcb
 

-
app-iscsi-priority, dcb
+
app-iscsi-priority, dcb
 

-
assigned-mac-address, 802-3-ethernet, 802-11-wireless
+
assigned-mac-address, 802-3-ethernet, 802-11-wireless
 

-
auth-alg, 802-11-wireless-security
+
auth-alg, 802-11-wireless-security
 

-
auth-retries, connection
+
auth-retries, connection
 

-
auth-timeout, 802-1x
+
auth-timeout, 802-1x
 

-
auto-config, gsm
+
auto-config, gsm
 

-
auto-negotiate, 802-3-ethernet
+
auto-negotiate, 802-3-ethernet
 

-
autoconnect, connection
+
autoconnect, connection
 

-
autoconnect-priority, connection
+
autoconnect-priority, connection
 

-
autoconnect-retries, connection
+
autoconnect-retries, connection
 

-
autoconnect-slaves, connection
+
autoconnect-slaves, connection
 

-
autoprobe-drivers, sriov
+
autoprobe-drivers, sriov
 

 

 

 

 
B

 

-
band, 802-11-wireless
+
band, 802-11-wireless
 

-
baud, ppp, serial
+
baud, ppp, serial
 

-
bdaddr, bluetooth
+
bdaddr, bluetooth
 

-
bits, serial
+
bits, serial
 

-
bond-downdelay, ovs-port
+
bond-downdelay, ovs-port
 

-
bond-mode, ovs-port
+
bond-mode, ovs-port
 

-
bond-updelay, ovs-port
+
bond-updelay, ovs-port
 

-
browser-only, proxy
+
browser-only, proxy
 

-
bssid, 802-11-wireless
+
bssid, 802-11-wireless
 

 

 

 

 
C

 

-
ca-cert, 802-1x
+
ca-cert, 802-1x
 

-
ca-cert-password, 802-1x
+
ca-cert-password, 802-1x
 

-
ca-cert-password-flags, 802-1x
+
ca-cert-password-flags, 802-1x
 

-
ca-path, 802-1x
+
ca-path, 802-1x
 

-
channel, 802-11-olpc-mesh, 802-11-wireless, wpan
+
channel, 802-11-olpc-mesh, 802-11-wireless, wpan
 

-
org.freedesktop.NetworkManager.Checkpoint, org.freedesktop.NetworkManager.Checkpoint
+
org.freedesktop.NetworkManager.Checkpoint, org.freedesktop.NetworkManager.Checkpoint
 

-
org.freedesktop.NetworkManager.Checkpoint::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Checkpoint::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Checkpoint:Created, The "Created" property
+
org.freedesktop.NetworkManager.Checkpoint:Created, The "Created" property
 

-
org.freedesktop.NetworkManager.Checkpoint:Devices, The "Devices" property
+
org.freedesktop.NetworkManager.Checkpoint:Devices, The "Devices" property
 

-
org.freedesktop.NetworkManager.Checkpoint:RollbackTimeout, The "RollbackTimeout" property
+
org.freedesktop.NetworkManager.Checkpoint:RollbackTimeout, The "RollbackTimeout" property
 

-
client-cert, 802-1x
+
client-cert, 802-1x
 

-
client-cert-password, 802-1x
+
client-cert-password, 802-1x
 

-
client-cert-password-flags, 802-1x
+
client-cert-password-flags, 802-1x
 

-
cloned-mac-address, 802-3-ethernet, 802-11-wireless
+
cloned-mac-address, 802-3-ethernet, 802-11-wireless
 

-
config, team, team-port
+
config, team, team-port
 

-
crtscts, ppp
+
crtscts, ppp
 

 

 

 

 
D

 

-
dad-timeout, ipv4, ipv6
+
dad-timeout, ipv4, ipv6
+

+
data, user, vpn
 

-
data, user, vpn
+
datapath-type, ovs-bridge
 

-
datapath-type, ovs-bridge
+
destination-port, vxlan
 

-
destination-port, vxlan
+
devargs, ovs-dpdk
 

-
devargs, ovs-dpdk
+
device-id, gsm
 

-
device-id, gsm
+
org.freedesktop.NetworkManager.Device.Wired, org.freedesktop.NetworkManager.Device.Wired
 

-
org.freedesktop.NetworkManager.Device.Wired, org.freedesktop.NetworkManager.Device.Wired
+
org.freedesktop.NetworkManager.Device.Wired::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Wired::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Wired:Carrier, The "Carrier" property
 

-
org.freedesktop.NetworkManager.Device.Wired:Carrier, The "Carrier" property
+
org.freedesktop.NetworkManager.Device.Wired:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Wired:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Wired:PermHwAddress, The "PermHwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Wired:PermHwAddress, The "PermHwAddress" property
+
org.freedesktop.NetworkManager.Device.Wired:S390Subchannels, The "S390Subchannels" property
 

-
org.freedesktop.NetworkManager.Device.Wired:S390Subchannels, The "S390Subchannels" property
+
org.freedesktop.NetworkManager.Device.Wired:Speed, The "Speed" property
 

-
org.freedesktop.NetworkManager.Device.Wired:Speed, The "Speed" property
+
org.freedesktop.NetworkManager.Device.Wireless, org.freedesktop.NetworkManager.Device.Wireless
 

-
org.freedesktop.NetworkManager.Device.Wireless, org.freedesktop.NetworkManager.Device.Wireless
+
org.freedesktop.NetworkManager.Device.Wireless.GetAccessPoints(), The GetAccessPoints() method
 

-
org.freedesktop.NetworkManager.Device.Wireless.GetAccessPoints(), The GetAccessPoints() method
+
org.freedesktop.NetworkManager.Device.Wireless.GetAllAccessPoints(), The GetAllAccessPoints() method
 

-
org.freedesktop.NetworkManager.Device.Wireless.GetAllAccessPoints(), The GetAllAccessPoints() method
+
org.freedesktop.NetworkManager.Device.Wireless.RequestScan(), The RequestScan() method
 

-
org.freedesktop.NetworkManager.Device.Wireless.RequestScan(), The RequestScan() method
+
org.freedesktop.NetworkManager.Device.Wireless::AccessPointAdded, The "AccessPointAdded" signal
 

-
org.freedesktop.NetworkManager.Device.Wireless::AccessPointAdded, The "AccessPointAdded" signal
+
org.freedesktop.NetworkManager.Device.Wireless::AccessPointRemoved, The "AccessPointRemoved" signal
 

-
org.freedesktop.NetworkManager.Device.Wireless::AccessPointRemoved, The "AccessPointRemoved" signal
+
org.freedesktop.NetworkManager.Device.Wireless::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.Device.Wireless::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.Device.Wireless:AccessPoints, The "AccessPoints" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:AccessPoints, The "AccessPoints" property
+
org.freedesktop.NetworkManager.Device.Wireless:ActiveAccessPoint, The "ActiveAccessPoint" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:ActiveAccessPoint, The "ActiveAccessPoint" property
+
org.freedesktop.NetworkManager.Device.Wireless:Bitrate, The "Bitrate" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:Bitrate, The "Bitrate" property
+
org.freedesktop.NetworkManager.Device.Wireless:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.Wireless:LastScan, The "LastScan" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:LastScan, The "LastScan" property
+
org.freedesktop.NetworkManager.Device.Wireless:Mode, The "Mode" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:Mode, The "Mode" property
+
org.freedesktop.NetworkManager.Device.Wireless:PermHwAddress, The "PermHwAddress" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:PermHwAddress, The "PermHwAddress" property
+
org.freedesktop.NetworkManager.Device.Wireless:WirelessCapabilities, The "WirelessCapabilities" property
 

-
org.freedesktop.NetworkManager.Device.Wireless:WirelessCapabilities, The "WirelessCapabilities" property
+
org.freedesktop.NetworkManager.Device.WifiP2P, org.freedesktop.NetworkManager.Device.WifiP2P
 

-
org.freedesktop.NetworkManager.Device.WifiP2P, org.freedesktop.NetworkManager.Device.WifiP2P
+
org.freedesktop.NetworkManager.Device.WifiP2P.StartFind(), The StartFind() method
 

-
org.freedesktop.NetworkManager.Device.WifiP2P.StartFind(), The StartFind() method
+
org.freedesktop.NetworkManager.Device.WifiP2P.StopFind(), The StopFind() method
 

-
org.freedesktop.NetworkManager.Device.WifiP2P.StopFind(), The StopFind() method
+
org.freedesktop.NetworkManager.Device.WifiP2P::PeerAdded, The "PeerAdded" signal
 

-
org.freedesktop.NetworkManager.Device.WifiP2P::PeerAdded, The "PeerAdded" signal
+
org.freedesktop.NetworkManager.Device.WifiP2P::PeerRemoved, The "PeerRemoved" signal
 

-
org.freedesktop.NetworkManager.Device.WifiP2P::PeerRemoved, The "PeerRemoved" signal
+
org.freedesktop.NetworkManager.Device.WifiP2P:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.Device.WifiP2P:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.Device.WifiP2P:Peers, The "Peers" property
 

-
org.freedesktop.NetworkManager.Device.WifiP2P:Peers, The "Peers" property
+
dhcp-anycast-address, 802-11-olpc-mesh
 

-
dhcp-anycast-address, 802-11-olpc-mesh
+
dhcp-client-id, ipv4
 

-
dhcp-client-id, ipv4
+
dhcp-duid, ipv6
 

-
dhcp-duid, ipv6
+
dhcp-fqdn, ipv4
 

-
dhcp-fqdn, ipv4
+
dhcp-hostname, ipv4, ipv6
 

-
dhcp-hostname, ipv4, ipv6
+
dhcp-hostname-flags, ipv4, ipv6
 

-
dhcp-hostname-flags, ipv4, ipv6
+
dhcp-iaid, ipv4, ipv6
 

-
dhcp-iaid, ipv4, ipv6
+
dhcp-send-hostname, ipv4, ipv6
 

-
dhcp-send-hostname, ipv4, ipv6
+
dhcp-timeout, ipv4, ipv6
 

-
dhcp-timeout, ipv4, ipv6
+
org.freedesktop.NetworkManager.DHCP4Config, org.freedesktop.NetworkManager.DHCP4Config
 

-
org.freedesktop.NetworkManager.DHCP4Config, org.freedesktop.NetworkManager.DHCP4Config
+
org.freedesktop.NetworkManager.DHCP4Config::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.DHCP4Config::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.DHCP4Config:Options, The "Options" property
 

-
org.freedesktop.NetworkManager.DHCP4Config:Options, The "Options" property
+
org.freedesktop.NetworkManager.DHCP6Config, org.freedesktop.NetworkManager.DHCP6Config
 

-
org.freedesktop.NetworkManager.DHCP6Config, org.freedesktop.NetworkManager.DHCP6Config
+
org.freedesktop.NetworkManager.DHCP6Config::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.DHCP6Config::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.DHCP6Config:Options, The "Options" property
 

-
org.freedesktop.NetworkManager.DHCP6Config:Options, The "Options" property
+
dns, ipv4, ipv6
 

-
dns, ipv4, ipv6
+
dns-options, ipv4, ipv6
 

-
dns-options, ipv4, ipv6
+
dns-priority, ipv4, ipv6
 

-
dns-priority, ipv4, ipv6
+
dns-search, ipv4, ipv6
 

-
dns-search, ipv4, ipv6
+
domain-match, 802-1x
 

-
domain-match, 802-1x
+
domain-suffix-match, 802-1x
 

-
domain-suffix-match, 802-1x
+
driver, match
 

-
duplex, 802-3-ethernet
+
duplex, 802-3-ethernet
 

 

 

 

 
E

 

-
eap, 802-1x
+
eap, 802-1x
 

-
egress-priority-map, vlan
+
egress-priority-map, vlan
 

-
encapsulation, adsl
+
encapsulation, adsl
 

-
encapsulation-limit, ip-tunnel
+
encapsulation-limit, ip-tunnel
 

-
encrypt, macsec
+
encrypt, macsec
 

 

 

 

 
F

 

-
fail-mode, ovs-bridge
+
fail-mode, ovs-bridge
 

-
fils, 802-11-wireless-security
+
fils, 802-11-wireless-security
 

-
flags, ip-tunnel, vlan
+
flags, ip-tunnel, vlan
 

-
flow-label, ip-tunnel
+
flow-label, ip-tunnel
 

-
forward-delay, bridge
+
forward-delay, bridge
 

-
fwmark, wireguard
+
fwmark, wireguard
 

 

 

 

 
G

 

-
gateway, ipv4, ipv6
+
gateway, ipv4, ipv6
 

-
gateway-ping-timeout, connection
+
gateway-ping-timeout, connection
 

-
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless
+
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless
 

-
group, tun, 802-11-wireless-security
+
group, tun, 802-11-wireless-security
 

-
group-address, bridge
+
group-address, bridge
 

-
group-forward-mask, bridge
+
group-forward-mask, bridge
 

 

 

 

 
H

 

-
hairpin-mode, bridge-port
+
hairpin-mode, bridge-port
 

-
hello-time, bridge
+
hello-time, bridge
 

-
hidden, 802-11-wireless
+
hidden, 802-11-wireless
 

-
home-only, gsm
+
home-only, gsm
 

 

 

 

 
I

 

-
id, connection, vlan, vxlan
+
id, connection, vlan, vxlan
 

-
identity, 802-1x
+
identity, 802-1x
 

-
ignore-auto-dns, ipv4, ipv6
+
ignore-auto-dns, ipv4, ipv6
 

-
ignore-auto-routes, ipv4, ipv6
+
ignore-auto-routes, ipv4, ipv6
 

-
ingress-priority-map, vlan
+
ingress-priority-map, vlan
 

-
input-key, ip-tunnel
+
input-key, ip-tunnel
 

-
interface-name, connection, bond, bridge, match, team, vlan
+
interface-name, connection, bond, bridge, match, team, vlan
 

-
ip4-auto-default-route, wireguard
+
ip4-auto-default-route, wireguard
 

-
ip6-auto-default-route, wireguard
+
ip6-auto-default-route, wireguard
 

-
ip6-privacy, ipv6
+
ip6-privacy, ipv6
 

 

 

 

 
K

-
key-mgmt, 802-11-wireless-security
-

+

+
kernel-command-line, match
+

+
key-mgmt, 802-11-wireless-security
+

+

 

 

 
L

 

-
l2-miss, vxlan
+
l2-miss, vxlan
 

-
l3-miss, vxlan
+
l3-miss, vxlan
 

-
lacp, ovs-port
+
lacp, ovs-port
 

-
lacp-key, team-port
+
lacp-key, team-port
 

-
lacp-prio, team-port
+
lacp-prio, team-port
 

-
lcp-echo-failure, ppp
+
lcp-echo-failure, ppp
 

-
lcp-echo-interval, ppp
+
lcp-echo-interval, ppp
 

-
leap-password, 802-11-wireless-security
+
leap-password, 802-11-wireless-security
 

-
leap-password-flags, 802-11-wireless-security
+
leap-password-flags, 802-11-wireless-security
 

-
leap-username, 802-11-wireless-security
+
leap-username, 802-11-wireless-security
 

-
learning, vxlan
+
learning, vxlan
 

-
limit, vxlan
+
limit, vxlan
 

-
link-watchers, team, team-port
+
link-watchers, team, team-port
 

-
listen-port, wireguard
+
listen-port, wireguard
 

-
lldp, connection
+
lldp, connection
 

-
llmnr, connection
+
llmnr, connection
 

-
local, ip-tunnel, vxlan
+
local, ip-tunnel, vxlan
 

 

 

 

 
M

 

-
mac-address, bridge, infiniband, wimax, 802-3-ethernet, 802-11-wireless, wpan
+
mac-address, bridge, infiniband, wimax, 802-3-ethernet, 802-11-wireless, wpan
+

+
mac-address-blacklist, 802-3-ethernet, 802-11-wireless
+

+
mac-address-randomization, 802-11-wireless
 

-
mac-address-blacklist, 802-3-ethernet, 802-11-wireless
+
org.freedesktop.NetworkManager, org.freedesktop.NetworkManager
 

-
mac-address-randomization, 802-11-wireless
+
org.freedesktop.NetworkManager.ActivateConnection(), The ActivateConnection() method
 

-
org.freedesktop.NetworkManager, org.freedesktop.NetworkManager
+
org.freedesktop.NetworkManager.AddAndActivateConnection(), The AddAndActivateConnection() method
 

-
org.freedesktop.NetworkManager.ActivateConnection(), The ActivateConnection() method
+
org.freedesktop.NetworkManager.AddAndActivateConnection2(), The AddAndActivateConnection2() method
 

-
org.freedesktop.NetworkManager.AddAndActivateConnection(), The AddAndActivateConnection() method
+
org.freedesktop.NetworkManager.CheckConnectivity(), The CheckConnectivity() method
 

-
org.freedesktop.NetworkManager.AddAndActivateConnection2(), The AddAndActivateConnection2() method
+
org.freedesktop.NetworkManager.CheckpointAdjustRollbackTimeout(), The CheckpointAdjustRollbackTimeout() method
 

-
org.freedesktop.NetworkManager.CheckConnectivity(), The CheckConnectivity() method
+
org.freedesktop.NetworkManager.CheckpointCreate(), The CheckpointCreate() method
 

-
org.freedesktop.NetworkManager.CheckpointAdjustRollbackTimeout(), The CheckpointAdjustRollbackTimeout() method
+
org.freedesktop.NetworkManager.CheckpointDestroy(), The CheckpointDestroy() method
 

-
org.freedesktop.NetworkManager.CheckpointCreate(), The CheckpointCreate() method
+
org.freedesktop.NetworkManager.CheckpointRollback(), The CheckpointRollback() method
 

-
org.freedesktop.NetworkManager.CheckpointDestroy(), The CheckpointDestroy() method
+
org.freedesktop.NetworkManager.DeactivateConnection(), The DeactivateConnection() method
 

-
org.freedesktop.NetworkManager.CheckpointRollback(), The CheckpointRollback() method
+
org.freedesktop.NetworkManager.Enable(), The Enable() method
 

-
org.freedesktop.NetworkManager.DeactivateConnection(), The DeactivateConnection() method
+
org.freedesktop.NetworkManager.GetAllDevices(), The GetAllDevices() method
 

-
org.freedesktop.NetworkManager.Enable(), The Enable() method
+
org.freedesktop.NetworkManager.GetDeviceByIpIface(), The GetDeviceByIpIface() method
 

-
org.freedesktop.NetworkManager.GetAllDevices(), The GetAllDevices() method
+
org.freedesktop.NetworkManager.GetDevices(), The GetDevices() method
 

-
org.freedesktop.NetworkManager.GetDeviceByIpIface(), The GetDeviceByIpIface() method
+
org.freedesktop.NetworkManager.GetLogging(), The GetLogging() method
 

-
org.freedesktop.NetworkManager.GetDevices(), The GetDevices() method
+
org.freedesktop.NetworkManager.GetPermissions(), The GetPermissions() method
 

-
org.freedesktop.NetworkManager.GetLogging(), The GetLogging() method
+
org.freedesktop.NetworkManager.Reload(), The Reload() method
 

-
org.freedesktop.NetworkManager.GetPermissions(), The GetPermissions() method
+
org.freedesktop.NetworkManager.SetLogging(), The SetLogging() method
 

-
org.freedesktop.NetworkManager.Reload(), The Reload() method
+
org.freedesktop.NetworkManager.Sleep(), The Sleep() method
 

-
org.freedesktop.NetworkManager.SetLogging(), The SetLogging() method
+
org.freedesktop.NetworkManager.state(), The state() method
 

-
org.freedesktop.NetworkManager.Sleep(), The Sleep() method
+
org.freedesktop.NetworkManager::CheckPermissions, The "CheckPermissions" signal
 

-
org.freedesktop.NetworkManager.state(), The state() method
+
org.freedesktop.NetworkManager::DeviceAdded, The "DeviceAdded" signal
 

-
org.freedesktop.NetworkManager::CheckPermissions, The "CheckPermissions" signal
+
org.freedesktop.NetworkManager::DeviceRemoved, The "DeviceRemoved" signal
 

-
org.freedesktop.NetworkManager::DeviceAdded, The "DeviceAdded" signal
+
org.freedesktop.NetworkManager::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager::DeviceRemoved, The "DeviceRemoved" signal
+
org.freedesktop.NetworkManager::StateChanged, The "StateChanged" signal
 

-
org.freedesktop.NetworkManager::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager:ActivatingConnection, The "ActivatingConnection" property
 

-
org.freedesktop.NetworkManager::StateChanged, The "StateChanged" signal
+
org.freedesktop.NetworkManager:ActiveConnections, The "ActiveConnections" property
 

-
org.freedesktop.NetworkManager:ActivatingConnection, The "ActivatingConnection" property
+
org.freedesktop.NetworkManager:AllDevices, The "AllDevices" property
 

-
org.freedesktop.NetworkManager:ActiveConnections, The "ActiveConnections" property
+
org.freedesktop.NetworkManager:Capabilities, The "Capabilities" property
 

-
org.freedesktop.NetworkManager:AllDevices, The "AllDevices" property
+
org.freedesktop.NetworkManager:Checkpoints, The "Checkpoints" property
 

-
org.freedesktop.NetworkManager:Capabilities, The "Capabilities" property
+
org.freedesktop.NetworkManager:Connectivity, The "Connectivity" property
 

-
org.freedesktop.NetworkManager:Checkpoints, The "Checkpoints" property
+
org.freedesktop.NetworkManager:ConnectivityCheckAvailable, The "ConnectivityCheckAvailable" property
 

-
org.freedesktop.NetworkManager:Connectivity, The "Connectivity" property
+
org.freedesktop.NetworkManager:ConnectivityCheckEnabled, The "ConnectivityCheckEnabled" property
 

-
org.freedesktop.NetworkManager:ConnectivityCheckAvailable, The "ConnectivityCheckAvailable" property
+
org.freedesktop.NetworkManager:ConnectivityCheckUri, The "ConnectivityCheckUri" property
 

-
org.freedesktop.NetworkManager:ConnectivityCheckEnabled, The "ConnectivityCheckEnabled" property
+
org.freedesktop.NetworkManager:Devices, The "Devices" property
 

-
org.freedesktop.NetworkManager:ConnectivityCheckUri, The "ConnectivityCheckUri" property
+
org.freedesktop.NetworkManager:GlobalDnsConfiguration, The "GlobalDnsConfiguration" property
 

-
org.freedesktop.NetworkManager:Devices, The "Devices" property
+
org.freedesktop.NetworkManager:Metered, The "Metered" property
 

-
org.freedesktop.NetworkManager:GlobalDnsConfiguration, The "GlobalDnsConfiguration" property
+
org.freedesktop.NetworkManager:NetworkingEnabled, The "NetworkingEnabled" property
 

-
org.freedesktop.NetworkManager:Metered, The "Metered" property
+
org.freedesktop.NetworkManager:PrimaryConnection, The "PrimaryConnection" property
 

-
org.freedesktop.NetworkManager:NetworkingEnabled, The "NetworkingEnabled" property
+
org.freedesktop.NetworkManager:PrimaryConnectionType, The "PrimaryConnectionType" property
 

-
org.freedesktop.NetworkManager:PrimaryConnection, The "PrimaryConnection" property
+
org.freedesktop.NetworkManager:Startup, The "Startup" property
 

-
org.freedesktop.NetworkManager:PrimaryConnectionType, The "PrimaryConnectionType" property
+
org.freedesktop.NetworkManager:State, The "State" property
 

-
org.freedesktop.NetworkManager:Startup, The "Startup" property
+
org.freedesktop.NetworkManager:Version, The "Version" property
 

-
org.freedesktop.NetworkManager:State, The "State" property
+
org.freedesktop.NetworkManager:WimaxEnabled, The "WimaxEnabled" property
 

-
org.freedesktop.NetworkManager:Version, The "Version" property
+
org.freedesktop.NetworkManager:WimaxHardwareEnabled, The "WimaxHardwareEnabled" property
 

-
org.freedesktop.NetworkManager:WimaxEnabled, The "WimaxEnabled" property
+
org.freedesktop.NetworkManager:WirelessEnabled, The "WirelessEnabled" property
 

-
org.freedesktop.NetworkManager:WimaxHardwareEnabled, The "WimaxHardwareEnabled" property
+
org.freedesktop.NetworkManager:WirelessHardwareEnabled, The "WirelessHardwareEnabled" property
 

-
org.freedesktop.NetworkManager:WirelessEnabled, The "WirelessEnabled" property
+
org.freedesktop.NetworkManager:WwanEnabled, The "WwanEnabled" property
 

-
org.freedesktop.NetworkManager:WirelessHardwareEnabled, The "WirelessHardwareEnabled" property
+
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property
 

-
org.freedesktop.NetworkManager:WwanEnabled, The "WwanEnabled" property
+
master, connection
 

-
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property
+
max-age, bridge
 

-
master, connection
+
may-fail, ipv4, ipv6
 

-
max-age, bridge
+
mcast-rejoin-count, team
 

-
may-fail, ipv4, ipv6
+
mcast-rejoin-interval, team
 

-
mcast-rejoin-count, team
+
mcast-snooping-enable, ovs-bridge
 

-
mcast-rejoin-interval, team
+
mdns, connection
 

-
mcast-snooping-enable, ovs-bridge
+
metered, connection
 

-
mdns, connection
+
method, ipv4, ipv6, proxy
 

-
metered, connection
+
mka-cak, macsec
 

-
method, ipv4, ipv6, proxy
+
mka-cak-flags, macsec
 

-
mka-cak, macsec
+
mka-ckn, macsec
 

-
mka-cak-flags, macsec
+
mode, ip-tunnel, macsec, macvlan, tun, 802-11-wireless
 

-
mka-ckn, macsec
+
mppe-stateful, ppp
 

-
mode, ip-tunnel, macsec, macvlan, tun, 802-11-wireless
+
mru, ppp
 

-
mppe-stateful, ppp
+
mtu, cdma, gsm, infiniband, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless
 

-
mru, ppp
+
mud-url, connection
 

-
mtu, cdma, gsm, infiniband, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless
+
multi-connect, connection
 

-
multi-connect, connection
+
multi-queue, tun
 

-
multi-queue, tun
+
multicast-hash-max, bridge
 

-
multicast-querier, bridge
+
multicast-last-member-count, bridge
 

-
multicast-query-use-ifaddr, bridge
+
multicast-last-member-interval, bridge
 

-
multicast-router, bridge
+
multicast-membership-interval, bridge
 

-
multicast-snooping, bridge
+
multicast-querier, bridge
+

+
multicast-querier-interval, bridge
+

+
multicast-query-interval, bridge
+

+
multicast-query-response-interval, bridge
+

+
multicast-query-use-ifaddr, bridge
+

+
multicast-router, bridge
+

+
multicast-snooping, bridge
+

+
multicast-startup-query-count, bridge
+

+
multicast-startup-query-interval, bridge
 

 

 

 

 
N

 

-
network-id, gsm
+
network-id, gsm
 

-
network-name, wimax
+
network-name, wimax
 

-
never-default, ipv4, ipv6
+
never-default, ipv4, ipv6
 

-
NM80211ApFlags, enum NM80211ApFlags
+
NM80211ApFlags, enum NM80211ApFlags
 

-
NM80211ApSecurityFlags, enum NM80211ApSecurityFlags
+
NM80211ApSecurityFlags, enum NM80211ApSecurityFlags
 

-
NM80211Mode, enum NM80211Mode
+
NM80211Mode, enum NM80211Mode
 

-
NMActivationStateFlags, enum NMActivationStateFlags
+
NMActivationStateFlags, enum NMActivationStateFlags
 

-
NMActiveConnectionState, enum NMActiveConnectionState
+
NMActiveConnectionState, enum NMActiveConnectionState
 

-
NMActiveConnectionStateReason, enum NMActiveConnectionStateReason
+
NMActiveConnectionStateReason, enum NMActiveConnectionStateReason
 

-
NMBluetoothCapabilities, enum NMBluetoothCapabilities
+
NMBluetoothCapabilities, enum NMBluetoothCapabilities
 

-
NMCapability, enum NMCapability
+
NMCapability, enum NMCapability
 

-
NMCheckpointCreateFlags, enum NMCheckpointCreateFlags
+
NMCheckpointCreateFlags, enum NMCheckpointCreateFlags
 

-
NMClientPermission, enum NMClientPermission
+
NMClientPermission, enum NMClientPermission
 

-
NMClientPermissionResult, enum NMClientPermissionResult
+
NMClientPermissionResult, enum NMClientPermissionResult
 

-
NMConnectionMultiConnect, enum NMConnectionMultiConnect
+
NMConnectionMultiConnect, enum NMConnectionMultiConnect
 

-
NMConnectivityState, enum NMConnectivityState
+
NMConnectivityState, enum NMConnectivityState
 

-
NMDeviceCapabilities, enum NMDeviceCapabilities
+
NMDeviceCapabilities, enum NMDeviceCapabilities
 

-
NMDeviceInterfaceFlags, enum NMDeviceInterfaceFlags
+
NMDeviceInterfaceFlags, enum NMDeviceInterfaceFlags
 

-
NMDeviceModemCapabilities, enum NMDeviceModemCapabilities
+
NMDeviceModemCapabilities, enum NMDeviceModemCapabilities
 

-
NMDeviceState, enum NMDeviceState
+
NMDeviceState, enum NMDeviceState
 

-
NMDeviceStateReason, enum NMDeviceStateReason
+
NMDeviceStateReason, enum NMDeviceStateReason
 

-
NMDeviceType, enum NMDeviceType
+
NMDeviceType, enum NMDeviceType
 

-
NMDeviceWifiCapabilities, enum NMDeviceWifiCapabilities
+
NMDeviceWifiCapabilities, enum NMDeviceWifiCapabilities
 

-
NMIPTunnelMode, enum NMIPTunnelMode
+
NMIPTunnelMode, enum NMIPTunnelMode
 

-
NMManagerReloadFlags, enum NMManagerReloadFlags
+
NMManagerReloadFlags, enum NMManagerReloadFlags
 

-
NMMetered, enum NMMetered
+
NMMetered, enum NMMetered
 

-
NMRollbackResult, enum NMRollbackResult
+
NMRollbackResult, enum NMRollbackResult
 

-
NMSecretAgentCapabilities, enum NMSecretAgentCapabilities
+
NMSecretAgentCapabilities, enum NMSecretAgentCapabilities
 

-
NMSecretAgentGetSecretsFlags, enum NMSecretAgentGetSecretsFlags
+
NMSecretAgentGetSecretsFlags, enum NMSecretAgentGetSecretsFlags
 

-
NMSettingsAddConnection2Flags, enum NMSettingsAddConnection2Flags
+
NMSettingsAddConnection2Flags, enum NMSettingsAddConnection2Flags
 

-
NMSettingsConnectionFlags, enum NMSettingsConnectionFlags
+
NMSettingsConnectionFlags, enum NMSettingsConnectionFlags
 

-
NMSettingsUpdate2Flags, enum NMSettingsUpdate2Flags
+
NMSettingsUpdate2Flags, enum NMSettingsUpdate2Flags
 

-
NMState, enum NMState
+
NMState, enum NMState
 

-
NMTernary, enum NMTernary
+
NMTernary, enum NMTernary
 

-
NMVpnConnectionState, enum NMVpnConnectionState
+
NMVpnConnectionState, enum NMVpnConnectionState
 

-
NMVpnConnectionStateReason, enum NMVpnConnectionStateReason
+
NMVpnConnectionStateReason, enum NMVpnConnectionStateReason
 

-
NMVpnPluginFailure, enum NMVpnPluginFailure
+
NMVpnPluginFailure, enum NMVpnPluginFailure
 

-
NMVpnServiceState, enum NMVpnServiceState
+
NMVpnServiceState, enum NMVpnServiceState
 

-
NMWimaxNspNetworkType, enum NMWimaxNspNetworkType
+
NMWimaxNspNetworkType, enum NMWimaxNspNetworkType
 

-
no-vj-comp, ppp
+
no-vj-comp, ppp
 

-
noauth, ppp
+
noauth, ppp
 

-
nobsdcomp, ppp
+
nobsdcomp, ppp
 

-
nodeflate, ppp
+
nodeflate, ppp
 

-
notify-peers-count, team
+
notify-peers-count, team
 

-
notify-peers-interval, team
+
notify-peers-interval, team
 

-
number, cdma, gsm
+
number, cdma, gsm
 

 

 

 

 
O

 

-
optional, 802-1x
+
optional, 802-1x
 

-
options, bond
+
options, bond
 

-
output-key, ip-tunnel
+
output-key, ip-tunnel
 

-
owner, tun
+
owner, tun
 

 

 

 

 
P

 

-
p-key, infiniband
+
p-key, infiniband
+

+
pac-file, 802-1x
 

-
pac-file, 802-1x
+
pac-script, proxy
 

-
pac-script, proxy
+
pac-url, proxy
 

-
pac-url, proxy
+
page, wpan
 

-
page, wpan
+
pairwise, 802-11-wireless-security
 

-
pairwise, 802-11-wireless-security
+
pan-id, wpan
 

-
pan-id, wpan
+
parent, 6lowpan, infiniband, ip-tunnel, macsec, macvlan, pppoe, vlan, vxlan
 

-
parent, 6lowpan, infiniband, ip-tunnel, macsec, macvlan, pppoe, vlan, vxlan
+
parity, serial
 

-
parity, serial
+
password, 802-1x, adsl, cdma, gsm, pppoe
 

-
password, 802-1x, adsl, cdma, gsm, pppoe
+
password-flags, 802-1x, adsl, cdma, gsm, pppoe
 

-
password-flags, 802-1x, adsl, cdma, gsm, pppoe
+
password-raw, 802-1x
 

-
password-raw, 802-1x
+
password-raw-flags, 802-1x
 

-
password-raw-flags, 802-1x
+
path, match
 

-
path-cost, bridge-port
+
path-cost, bridge-port
 

-
path-mtu-discovery, ip-tunnel
+
path-mtu-discovery, ip-tunnel
 

-
peer, ovs-patch, wifi-p2p
+
peer, ovs-patch, wifi-p2p
 

-
peer-routes, wireguard
+
peer-routes, wireguard
 

-
peers, wireguard
+
peers, wireguard
 

-
permissions, connection
+
permissions, connection
 

-
persistent, vpn
+
persistent, vpn
 

-
phase1-auth-flags, 802-1x
+
phase1-auth-flags, 802-1x
 

-
phase1-fast-provisioning, 802-1x
+
phase1-fast-provisioning, 802-1x
 

-
phase1-peaplabel, 802-1x
+
phase1-peaplabel, 802-1x
 

-
phase1-peapver, 802-1x
+
phase1-peapver, 802-1x
 

-
phase2-altsubject-matches, 802-1x
+
phase2-altsubject-matches, 802-1x
 

-
phase2-auth, 802-1x
+
phase2-auth, 802-1x
 

-
phase2-autheap, 802-1x
+
phase2-autheap, 802-1x
 

-
phase2-ca-cert, 802-1x
+
phase2-ca-cert, 802-1x
 

-
phase2-ca-cert-password, 802-1x
+
phase2-ca-cert-password, 802-1x
 

-
phase2-ca-cert-password-flags, 802-1x
+
phase2-ca-cert-password-flags, 802-1x
 

-
phase2-ca-path, 802-1x
+
phase2-ca-path, 802-1x
 

-
phase2-client-cert, 802-1x
+
phase2-client-cert, 802-1x
 

-
phase2-client-cert-password, 802-1x
+
phase2-client-cert-password, 802-1x
 

-
phase2-client-cert-password-flags, 802-1x
+
phase2-client-cert-password-flags, 802-1x
 

-
phase2-domain-match, 802-1x
+
phase2-domain-match, 802-1x
 

-
phase2-domain-suffix-match, 802-1x
+
phase2-domain-suffix-match, 802-1x
 

-
phase2-private-key, 802-1x
+
phase2-private-key, 802-1x
 

-
phase2-private-key-password, 802-1x
+
phase2-private-key-password, 802-1x
 

-
phase2-private-key-password-flags, 802-1x
+
phase2-private-key-password-flags, 802-1x
 

-
phase2-subject-match, 802-1x
+
phase2-subject-match, 802-1x
 

-
pi, tun
+
pi, tun
 

-
pin, 802-1x, gsm
+
pin, 802-1x, gsm
 

-
pin-flags, 802-1x, gsm
+
pin-flags, 802-1x, gsm
 

-
pmf, 802-11-wireless-security
+
pmf, 802-11-wireless-security
 

-
port, macsec, 802-3-ethernet
+
port, macsec, 802-3-ethernet
 

-
powersave, 802-11-wireless
+
powersave, 802-11-wireless
 

-
org.freedesktop.NetworkManager.PPP, org.freedesktop.NetworkManager.PPP
+
org.freedesktop.NetworkManager.PPP, org.freedesktop.NetworkManager.PPP
 

-
org.freedesktop.NetworkManager.PPP.NeedSecrets(), The NeedSecrets() method
+
org.freedesktop.NetworkManager.PPP.NeedSecrets(), The NeedSecrets() method
 

-
org.freedesktop.NetworkManager.PPP.SetIfindex(), The SetIfindex() method
+
org.freedesktop.NetworkManager.PPP.SetIfindex(), The SetIfindex() method
 

-
org.freedesktop.NetworkManager.PPP.SetIp4Config(), The SetIp4Config() method
+
org.freedesktop.NetworkManager.PPP.SetIp4Config(), The SetIp4Config() method
 

-
org.freedesktop.NetworkManager.PPP.SetIp6Config(), The SetIp6Config() method
+
org.freedesktop.NetworkManager.PPP.SetIp6Config(), The SetIp6Config() method
 

-
org.freedesktop.NetworkManager.PPP.SetState(), The SetState() method
+
org.freedesktop.NetworkManager.PPP.SetState(), The SetState() method
 

-
prio, team-port
+
prio, team-port
 

-
priority, bridge, bridge-port
+
priority, bridge, bridge-port
 

-
priority-bandwidth, dcb
+
priority-bandwidth, dcb
 

-
priority-flow-control, dcb
+
priority-flow-control, dcb
 

-
priority-flow-control-flags, dcb
+
priority-flow-control-flags, dcb
 

-
priority-group-bandwidth, dcb
+
priority-group-bandwidth, dcb
 

-
priority-group-flags, dcb
+
priority-group-flags, dcb
 

-
priority-group-id, dcb
+
priority-group-id, dcb
 

-
priority-strict-bandwidth, dcb
+
priority-strict-bandwidth, dcb
 

-
priority-traffic-class, dcb
+
priority-traffic-class, dcb
 

-
private-key, 802-1x, wireguard
+
private-key, 802-1x, wireguard
 

-
private-key-flags, wireguard
+
private-key-flags, wireguard
 

-
private-key-password, 802-1x
+
private-key-password, 802-1x
 

-
private-key-password-flags, 802-1x
+
private-key-password-flags, 802-1x
 

-
promiscuous, macvlan
+
promiscuous, macvlan
 

-
proto, 802-11-wireless-security
+
proto, 802-11-wireless-security
 

-
protocol, adsl
+
protocol, adsl
 

-
proxy, vxlan
+
proxy, vxlan
 

-
psk, 802-11-wireless-security
+
psk, 802-11-wireless-security
 

-
psk-flags, 802-11-wireless-security
+
psk-flags, 802-11-wireless-security
 

 

 

 

 
Q

 

-
qdiscs, tc
+
qdiscs, tc
 

-
queue-id, team-port
+
queue-id, team-port
 

 

 

 

 
R

 

-
ra-timeout, ipv6
+
ra-timeout, ipv6
 

-
rate, 802-11-wireless
+
rate, 802-11-wireless
 

-
read-only, connection
+
read-only, connection
 

-
refuse-chap, ppp
+
refuse-chap, ppp
 

-
refuse-eap, ppp
+
refuse-eap, ppp
 

-
refuse-mschap, ppp
+
refuse-mschap, ppp
 

-
refuse-mschapv2, ppp
+
refuse-mschapv2, ppp
 

-
refuse-pap, ppp
+
refuse-pap, ppp
 

-
remote, ip-tunnel, vxlan
+
remote, ip-tunnel, vxlan
 

-
require-mppe, ppp
+
require-mppe, ppp
 

-
require-mppe-128, ppp
+
require-mppe-128, ppp
 

-
route-data, ipv4, ipv6
+
route-data, ipv4, ipv6
 

-
route-metric, ipv4, ipv6
+
route-metric, ipv4, ipv6
 

-
route-table, ipv4, ipv6
+
route-table, ipv4, ipv6
 

-
routes, ipv4, ipv6
+
routes, ipv4, ipv6
 

-
rsc, vxlan
+
rsc, vxlan
 

-
rstp-enable, ovs-bridge
+
rstp-enable, ovs-bridge
 

-
runner, team
+
runner, team
 

-
runner-active, team
+
runner-active, team
 

-
runner-agg-select-policy, team
+
runner-agg-select-policy, team
 

-
runner-fast-rate, team
+
runner-fast-rate, team
 

-
runner-hwaddr-policy, team
+
runner-hwaddr-policy, team
 

-
runner-min-ports, team
+
runner-min-ports, team
 

-
runner-sys-prio, team
+
runner-sys-prio, team
 

-
runner-tx-balancer, team
+
runner-tx-balancer, team
 

-
runner-tx-balancer-interval, team
+
runner-tx-balancer-interval, team
 

-
runner-tx-hash, team
+
runner-tx-hash, team
 

 

 

 

 
S

 

-
s390-nettype, 802-3-ethernet
+
s390-nettype, 802-3-ethernet
 

-
s390-options, 802-3-ethernet
+
s390-options, 802-3-ethernet
 

-
s390-subchannels, 802-3-ethernet
+
s390-subchannels, 802-3-ethernet
 

-
secondaries, connection
+
secondaries, connection
 

-
secrets, vpn
+
secrets, vpn
 

-
security, 802-11-wireless
+
security, 802-11-wireless
 

-
seen-bssids, 802-11-wireless
+
seen-bssids, 802-11-wireless
 

-
send-delay, serial
+
send-delay, serial
 

-
send-sci, macsec
+
send-sci, macsec
 

-
service, pppoe
+
service, pppoe
 

-
service-type, vpn
+
service-type, vpn
 

-
short-address, wpan
+
short-address, wpan
 

-
sim-id, gsm
+
sim-id, gsm
 

-
sim-operator-id, gsm
+
sim-operator-id, gsm
 

-
slave-type, connection
+
slave-type, connection
 

-
source-port-max, vxlan
+
source-port-max, vxlan
 

-
source-port-min, vxlan
+
source-port-min, vxlan
 

-
speed, 802-3-ethernet
+
speed, 802-3-ethernet
 

-
ssid, 802-11-olpc-mesh, 802-11-wireless
+
ssid, 802-11-olpc-mesh, 802-11-wireless
 

-
stable-id, connection
+
stable-id, connection
 

-
sticky, team-port
+
sticky, team-port
 

-
stopbits, serial
+
stopbits, serial
 

-
stp, bridge
+
stp, bridge
 

-
stp-enable, ovs-bridge
+
stp-enable, ovs-bridge
 

-
subject-match, 802-1x
+
subject-match, 802-1x
 

-
system-ca-certs, 802-1x
+
system-ca-certs, 802-1x
 

 

 

 

 
T

 

-
table, vrf
+
table, vrf
 

-
tag, ovs-port
+
tag, ovs-port
 

-
tap, macvlan
+
tap, macvlan
 

-
tfilters, tc
+
tfilters, tc
 

-
timeout, vpn
+
timeout, vpn
 

-
timestamp, connection
+
timestamp, connection
 

-
token, ipv6
+
token, ipv6
 

-
tos, ip-tunnel, vxlan
+
tos, ip-tunnel, vxlan
 

-
total-vfs, sriov
+
total-vfs, sriov
 

-
transport-mode, infiniband
+
transport-mode, infiniband
 

-
ttl, ip-tunnel, vxlan
+
ttl, ip-tunnel, vxlan
 

-
tx-power, 802-11-wireless
+
tx-power, 802-11-wireless
 

-
type, connection, bluetooth, ovs-interface
+
type, connection, bluetooth, ovs-interface
 

 

 

 

 
U

 

-
user-name, vpn
+
user-name, vpn
 

-
username, adsl, cdma, gsm, pppoe
+
username, adsl, cdma, gsm, pppoe
 

-
uuid, connection
+
uuid, connection
 

 

 

 

 
V

 

-
validation, macsec
+
validation, macsec
 

-
vci, adsl
+
vci, adsl
 

-
vfs, sriov
+
vfs, sriov
 

-
vlan-default-pvid, bridge
+
vlan-default-pvid, bridge
 

-
vlan-filtering, bridge
+
vlan-filtering, bridge
 

-
vlan-mode, ovs-port
+
vlan-mode, ovs-port
 

-
vlan-protocol, bridge
+
vlan-protocol, bridge
 

-
vlan-stats-enabled, bridge
+
vlan-stats-enabled, bridge
 

-
vlans, bridge, bridge-port
+
vlans, bridge, bridge-port
 

-
vnet-hdr, tun
+
vnet-hdr, tun
 

-
vpi, adsl
+
vpi, adsl
 

-
org.freedesktop.NetworkManager.VPN.Connection, org.freedesktop.NetworkManager.VPN.Connection
+
org.freedesktop.NetworkManager.VPN.Connection, org.freedesktop.NetworkManager.VPN.Connection
 

-
org.freedesktop.NetworkManager.VPN.Connection::PropertiesChanged, The "PropertiesChanged" signal
+
org.freedesktop.NetworkManager.VPN.Connection::PropertiesChanged, The "PropertiesChanged" signal
 

-
org.freedesktop.NetworkManager.VPN.Connection::VpnStateChanged, The "VpnStateChanged" signal
+
org.freedesktop.NetworkManager.VPN.Connection::VpnStateChanged, The "VpnStateChanged" signal
 

-
org.freedesktop.NetworkManager.VPN.Connection:Banner, The "Banner" property
+
org.freedesktop.NetworkManager.VPN.Connection:Banner, The "Banner" property
 

-
org.freedesktop.NetworkManager.VPN.Connection:VpnState, The "VpnState" property
+
org.freedesktop.NetworkManager.VPN.Connection:VpnState, The "VpnState" property
 

-
org.freedesktop.NetworkManager.VPN.Plugin, org.freedesktop.NetworkManager.VPN.Plugin
+
org.freedesktop.NetworkManager.VPN.Plugin, org.freedesktop.NetworkManager.VPN.Plugin
 

-
org.freedesktop.NetworkManager.VPN.Plugin.Connect(), The Connect() method
+
org.freedesktop.NetworkManager.VPN.Plugin.Connect(), The Connect() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.ConnectInteractive(), The ConnectInteractive() method
+
org.freedesktop.NetworkManager.VPN.Plugin.ConnectInteractive(), The ConnectInteractive() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.Disconnect(), The Disconnect() method
+
org.freedesktop.NetworkManager.VPN.Plugin.Disconnect(), The Disconnect() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.NeedSecrets(), The NeedSecrets() method
+
org.freedesktop.NetworkManager.VPN.Plugin.NeedSecrets(), The NeedSecrets() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.NewSecrets(), The NewSecrets() method
+
org.freedesktop.NetworkManager.VPN.Plugin.NewSecrets(), The NewSecrets() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.SetConfig(), The SetConfig() method
+
org.freedesktop.NetworkManager.VPN.Plugin.SetConfig(), The SetConfig() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.SetFailure(), The SetFailure() method
+
org.freedesktop.NetworkManager.VPN.Plugin.SetFailure(), The SetFailure() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.SetIp4Config(), The SetIp4Config() method
+
org.freedesktop.NetworkManager.VPN.Plugin.SetIp4Config(), The SetIp4Config() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin.SetIp6Config(), The SetIp6Config() method
+
org.freedesktop.NetworkManager.VPN.Plugin.SetIp6Config(), The SetIp6Config() method
 

-
org.freedesktop.NetworkManager.VPN.Plugin::Config, The "Config" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::Config, The "Config" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::Failure, The "Failure" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::Failure, The "Failure" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::Ip4Config, The "Ip4Config" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::Ip4Config, The "Ip4Config" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::Ip6Config, The "Ip6Config" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::Ip6Config, The "Ip6Config" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::LoginBanner, The "LoginBanner" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::LoginBanner, The "LoginBanner" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::SecretsRequired, The "SecretsRequired" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::SecretsRequired, The "SecretsRequired" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin::StateChanged, The "StateChanged" signal
+
org.freedesktop.NetworkManager.VPN.Plugin::StateChanged, The "StateChanged" signal
 

-
org.freedesktop.NetworkManager.VPN.Plugin:State, The "State" property
+
org.freedesktop.NetworkManager.VPN.Plugin:State, The "State" property
 

 

 

 

 
W

 

-
wait-device-timeout, connection
+
wait-device-timeout, connection
 

-
wake-on-lan, 802-3-ethernet
+
wake-on-lan, 802-3-ethernet
 

-
wake-on-lan-password, 802-3-ethernet
+
wake-on-lan-password, 802-3-ethernet
 

-
wake-on-wlan, 802-11-wireless
+
wake-on-wlan, 802-11-wireless
 

-
wep-key-flags, 802-11-wireless-security
+
wep-key-flags, 802-11-wireless-security
 

-
wep-key-type, 802-11-wireless-security
+
wep-key-type, 802-11-wireless-security
 

-
wep-key0, 802-11-wireless-security
+
wep-key0, 802-11-wireless-security
 

-
wep-key1, 802-11-wireless-security
+
wep-key1, 802-11-wireless-security
 

-
wep-key2, 802-11-wireless-security
+
wep-key2, 802-11-wireless-security
 

-
wep-key3, 802-11-wireless-security
+
wep-key3, 802-11-wireless-security
 

-
wep-tx-keyidx, 802-11-wireless-security
+
wep-tx-keyidx, 802-11-wireless-security
 

-
wfd-ies, wifi-p2p
+
wfd-ies, wifi-p2p
 

-
org.freedesktop.NetworkManager.WifiP2PPeer, org.freedesktop.NetworkManager.WifiP2PPeer
+
org.freedesktop.NetworkManager.WifiP2PPeer, org.freedesktop.NetworkManager.WifiP2PPeer
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Flags, The "Flags" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Flags, The "Flags" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:HwAddress, The "HwAddress" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:HwAddress, The "HwAddress" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:LastSeen, The "LastSeen" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:LastSeen, The "LastSeen" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Manufacturer, The "Manufacturer" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Manufacturer, The "Manufacturer" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Model, The "Model" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Model, The "Model" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:ModelNumber, The "ModelNumber" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:ModelNumber, The "ModelNumber" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Name, The "Name" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Name, The "Name" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Serial, The "Serial" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Serial, The "Serial" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:Strength, The "Strength" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:Strength, The "Strength" property
 

-
org.freedesktop.NetworkManager.WifiP2PPeer:WfdIEs, The "WfdIEs" property
+
org.freedesktop.NetworkManager.WifiP2PPeer:WfdIEs, The "WfdIEs" property
 

-
wps-method, wifi-p2p, 802-11-wireless-security
+
wps-method, wifi-p2p, 802-11-wireless-security
 

 

 

 

 
Z

-
zone, connection
+
zone, connection
 

 

 

diff --git a/docs/api/html/manpages.html b/docs/api/html/manpages.html
index d108fba6..196e587a 100644
--- a/docs/api/html/manpages.html
+++ b/docs/api/html/manpages.html
@@ -41,7 +41,10 @@
 nmtui — Text User Interface for controlling NetworkManager
 
 

-nm-settings — Description of settings and properties of NetworkManager connection profiles
+nm-settings-dbus — Description of settings and properties of NetworkManager connection profiles on the D-Bus API
+

+

+nm-settings-nmcli — Description of settings and properties of NetworkManager connection profiles for nmcli
 

 

 nm-settings-keyfile — Description of keyfile settings plugin
diff --git a/docs/api/html/nm-dbus-types.html b/docs/api/html/nm-dbus-types.html
index 1cb0b7f0..a375ee33 100644
--- a/docs/api/html/nm-dbus-types.html
+++ b/docs/api/html/nm-dbus-types.html
@@ -1435,6 +1435,21 @@
 
  
 
+
+
+
NM_802_11_AP_SEC_KEY_MGMT_OWE_TM

+

+
+
+
= 0x00001000

+

+
+
+
WPA/RSN Opportunistic Wireless Encryption transition mode is supported. Since: 1.26.

+

+
+ 
+
 
 

 

@@ -4163,6 +4178,21 @@
 
  
 
+
+
+
NM_SETTINGS_CONNECTION_FLAG_EXTERNAL

+

+
+
+
= 0x08

+

+
+
+
the profile was generated to represent an external configuration of a networking device. Since: 1.26

+

+
+ 
+
 
 
 
@@ -4303,6 +4333,21 @@
 
  
 
+
+
+
NM_ACTIVATION_STATE_FLAG_EXTERNAL

+

+
+
+
= 0x80

+

+
+
+
the active connection was generated to represent an external configuration of a networking device. Since: 1.26

+

+
+ 
+
 
 
 
diff --git a/docs/api/html/nm-initrd-generator.html b/docs/api/html/nm-initrd-generator.html
index 8e17d821..23b00eb1 100644
--- a/docs/api/html/nm-initrd-generator.html
+++ b/docs/api/html/nm-initrd-generator.html
@@ -54,6 +54,13 @@
 
Output connection directory.

 
 
+

+            -i  |   --initrd-data-dir  
+            path 
+        

+
Output directory for initrd data (e.g. hostname).

+
+
 

             -d  |   --sysfs-dir  
             path 
@@ -81,6 +88,7 @@
 nameserver
 rd.peerdns
 rd.bootif
+rd.net.timeout.dhcp
 BOOTIF
 
 
Please consult the dracut.cmdline(7)
@@ -91,6 +99,26 @@
 
 
 

+
Differences from the network-legacy dracut module

+
nm-initrd-generator generates a set of
+    connections that are then configured by the NetworkManager
+    instance running in the initrd. There are some differences in
+    behavior compared to the network-legacy dracut module:

+
    
+
  • When an interface is configured with a static address
+        and a gateway, the network-legacy module waits that the
+        gateway responds to arping requests before proceeding, while
+        NetworkManager doesn't.
    • 
+
  • network-legacy configures interfaces one by one in the
+        order in which they are announced by udev. If multiple
+        interfaces specify a hostname (from command line or from
+        DHCP), the one from the last interface activated wins. With
+        NetworkManager, hostnames from command line have higher
+        precedence over ones from DHCP, and the last that appears in
+        the command line wins.
    • 
+

+

+

 
Exit Status

 
nm-initrd-generator exits with status 0. It ignores unrecognized
     options and prints an error message if it encounters a malformed option.

diff --git a/docs/api/html/nm-openvswitch.html b/docs/api/html/nm-openvswitch.html
index efc9d282..93f31a81 100644
--- a/docs/api/html/nm-openvswitch.html
+++ b/docs/api/html/nm-openvswitch.html
@@ -29,7 +29,7 @@
 
 

 

-
Overview

+
Overview

 
NetworkManager includes basic Open vSwitch support, good enough
     to be capable of setting up simple Open vSwitch configurations. It is not
     extensive and does not expose all functionality of Open vSwitch provides.
@@ -55,7 +55,7 @@
 
  • You can't enslave Interface directly to a Bridge. You
           always need a Port, even if it has just one interface.
    • 
 
  • There are no VLANs. The VLAN tagging is enabled by setting a
-          ovs-port.tag
+          ovs-port.tag
           property on a Port.
    • 
 
  • There are no bonds either. The bonding is enabled by
           enslaving multiple Interfaces to a Port and configured by setting
@@ -64,9 +64,9 @@
 
    
     
    
 
    
-
    Bridges
    
+
    Bridges
    
 
    Bridges are represented by connections of ovs-bridge
-      type.
+      type.
       Due to the limitations of OVSDB, "empty" Bridges (with no Ports) can't exist.
       NetworkManager inserts the records for Bridges into OVSDB when a Port is
       enslaved.
@@ -74,9 +74,9 @@
 
    
 
    
 
    
-
    Ports
    
+
    Ports
    
 
    Ports are represented by connections of ovs-port
-      type.
+      type.
       Due to the limitations of OVSDB, "empty" Ports (with no Interfaces) can't
       exist.  Ports can also be configured to do VLAN tagging or Bonding.
       NetworkManager inserts the records for Ports into OVSDB when an Interface is
@@ -84,19 +84,19 @@
 
    
 
    
 
    
-
    Interfaces
    
+
    Interfaces
    
 
    Interfaces are represented by a connections enslaved to a Port. The
       system interfaces (that have a corresponding Linux link) have a respective
-      connection.type
+      connection.type
       of the link (e.g. "wired", "bond", "dummy", etc.). Other interfaces ("internal"
       or "patch" interfaces) are of ovs-interface type. The OVSDB entries are
       inserted upon enslavement to a Port.
    
 
    
 
    • 
 
    
-
    Examples
    
+
    Examples
    
 
    
-
    Example 18. Creating a Bridge with a single internal Interface
    
+
    Example 18. Creating a Bridge with a single internal Interface
    
 
    
 
    $ nmcli conn add type ovs-bridge conn.interface bridge0
 Connection 'ovs-bridge-bridge0' (d10fc64d-1d48-4394-a1b8-e1aea72f27d5) successfully added.
@@ -113,7 +113,7 @@ Connection 'ovs-interface-iface0' (3640d2a1-a2fd-4718-92f1-cffadb5b6cdc) success
 
    
 
    
 
    
-
    Example 19. Adding a Linux interface to a Bridge
    
+
    Example 19. Adding a Linux interface to a Bridge
    
 
    
 
    $ nmcli conn add type ovs-port conn.interface port1 master bridge0
 Connection 'ovs-port-port1' (67d041eb-8e7b-4458-afee-a1d07c9c4552) successfully added.
@@ -124,7 +124,7 @@ Connection 'ovs-slave-eth0' (d459c45c-cf78-4c1c-b4b7-505e71379624) successfully
 
    
 
    
 
    
-
    Example 20. Creating a VLAN
    
+
    Example 20. Creating a VLAN
    
 
    
 
    $ nmcli conn add type ovs-port conn.interface port2 master bridge0 ovs-port.tag 120
 Connection 'ovs-port-port2' (3994c093-4ef7-4549-a4fd-627b831c3cb8) successfully added.
@@ -135,7 +135,7 @@ Connection 'ovs-slave-eth1' (099be06e-71ad-484d-8d5a-fcadc5f207f5) successfully
 
    
 
    
 
    
-
    Example 21. Creating a Bond
    
+
    Example 21. Creating a Bond
    
 
    
 
    $ nmcli conn add type ovs-port conn.interface bond0 master bridge0
 Connection 'ovs-port-bond0' (d154ebf9-e999-4e1b-a084-a3de53d25d8a) successfully added.
@@ -153,7 +153,7 @@ Connection 'ovs-slave-eth3' (8dedeecb-ed12-482b-b77a-24a4fb835136) successfully
 
    
 
    
 
    
-
    Bugs
    
+
    Bugs
    
 
      
 
    • Not all Open vSwitch capabilities are supported.
      • 
 
    • Open vSwitch devices don't expose many useful properties on D-Bus.
      • 
@@ -161,12 +161,12 @@ Connection 'ovs-slave-eth3' (8dedeecb-ed12-482b-b77a-24a4fb835136) successfully
 
      Probably many more.
      
 
    
 
    
-
    See Also
    
+
    See Also
    
 
    
       RFC 7047: The Open vSwitch Database Management Protocol,
       ovs-vsctl(8),
       ovs-vswitchd.conf.db(5),
-      nm-settings(5),
+      nm-settings(5),
       nmcli(1)
     
    
 
    
diff --git a/docs/api/html/nm-settings-dbus.html b/docs/api/html/nm-settings-dbus.html
new file mode 100644
index 00000000..c0941074
--- /dev/null
+++ b/docs/api/html/nm-settings-dbus.html
@@ -0,0 +1,4091 @@
+
+
+
+
+nm-settings-dbus: NetworkManager Reference Manual
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    
+
    
+
    
+
+
+
    
+
    nm-settings-dbus
    
+
    nm-settings-dbus — Description of settings and properties of NetworkManager connection profiles on the D-Bus API
    
+
    
+
    
+
    Description
    
+
    
+          NetworkManager is based on a concept of connection profiles, sometimes referred to as
+          connections only. These connection profiles contain a network configuration. When
+          NetworkManager activates a connection profile on a network device the configuration will
+          be applied and an active network connection will be established. Users are free to create
+          as many connection profiles as they see fit. Thus they are flexible in having various network
+          configurations for different networking needs. The connection profiles are handled by
+          NetworkManager via settings service and are exported on D-Bus
+          (/org/freedesktop/NetworkManager/Settings/<num> objects).
+          The conceptual objects can be described as follows:
+          
    
+
    
++++
+
+
+
+
+
    



    Connection (profile)
    
+                  A specific, encapsulated, independent group of settings describing
+                  all the configuration required to connect to a specific network.
+                  It is referred to by a unique identifier called the UUID. A connection
+                  is tied to a one specific device type, but not necessarily a specific
+                  hardware device. It is composed of one or more Settings
+                  objects.
+                
    
+
    
++++
+
+
+
+
+
    



    Setting
    
+                  A group of related key/value pairs describing a specific piece of a
+                  Connection (profile). Settings keys and allowed values are
+                  described in the tables below. Keys are also referred to as properties.
+                  Developers can find the setting objects and their properties in the libnm-core
+                  sources. Look for the *_class_init functions near the bottom
+                  of each setting source file.
+                
    
+
    
+
    
+              The settings and properties shown in tables below list all available connection
+              configuration options. However, note that not all settings are applicable to all
+              connection types. NetworkManager provides a command-line tool nmcli
+              that allows direct configuration of the settings and properties according to a connection
+              profile type. nmcli connection editor has also a built-in
+              describe command that can display description of particular settings
+              and properties of this page.
+            
    
+
++++
+
+
    



    
+
    
+
    
+
    connection setting
    
+
    General Connection Profile Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+auth-retriesint32-1The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently this only applies to 802-1x authentication.
    
+autoconnectbooleanTRUEWhether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.
    
+autoconnect-priorityint320The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority.
    
+autoconnect-retriesint32-1The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again.
    
+autoconnect-slavesNMSettingConnectionAutoconnectSlaves (int32) Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.
    
+gateway-ping-timeoutuint320If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping.
    
+idstring A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G".
    
+interface-namestring The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface.
    
+lldpint32-1Whether LLDP is enabled for the connection.
    
+llmnrint32-1Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable LLMNR for the interface, "resolve" (1) do not register hostname but allow resolving of LLMNR host names If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "yes"). This feature requires a plugin which supports LLMNR. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
+masterstring Interface name of the master device or UUID of the master connection.
    
+mdnsint32-1Whether mDNS is enabled for the connection. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable mDNS for the interface, "resolve" (1) do not register hostname but allow resolving of mDNS host names and "default" (-1) to allow lookup of a global default in NetworkManager.conf. If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "no"). This feature requires a plugin which supports mDNS. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
+meteredNMMetered (int32) Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately.
    
+mud-urlstring If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with "https://". The special value "none" is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is "none".
    
+multi-connectint320Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect.
    
+permissionsarray of string An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8.
    
+read-onlybooleanFALSEFALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.
    
+secondariesarray of string List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.
    
+slave-typestring Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave.
    
+stable-idstring This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.
    
+timestampuint640The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).
    
+typestring Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc).
    
+uuidstring A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").
    
+wait-device-timeoutint32-1Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.
    
+zonestring The trust level of a the connection.  Free form case-insensitive string (for example "Home", "Work", "Public").  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately.
    
+
    
+
    
+
    
+
    6lowpan setting
    
+
    6LoWPAN Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+parentstring If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created.
    
+
    
+
    
+
    
+
    802-1x setting
    
+
    IEEE 802.1x Authentication Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+altsubject-matchesarray of string List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
+anonymous-identitystring Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS.
    
+auth-timeoutint320A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds.
    
+ca-certbyte array Contains the CA certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
+ca-cert-passwordstring The password used to access the CA certificate stored in "ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+ca-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "ca-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
+ca-pathstring UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
+client-certbyte array Contains the client certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte.
    
+client-cert-passwordstring The password used to access the client certificate stored in "client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+client-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "client-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
+domain-matchstring Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
+domain-suffix-matchstring Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
+eaparray of string The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast".  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
    
+identitystring Identity string for EAP authentication methods.  Often the user's user or login name.
    
+optionalbooleanFALSEWhether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication.
    
+pac-filestring UTF-8 encoded file path containing PAC for EAP-FAST.
    
+passwordstring UTF-8 encoded password used for EAP authentication methods. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
+password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
+password-rawbyte array Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
+password-raw-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password-raw" property. (see the section called “Secret flag types:” for flag values)
    
+phase1-auth-flagsuint320Specifies authentication flags to use in "phase 1" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details.
    
+phase1-fast-provisioningstring Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the "eap" property. Recognized values are "0" (disabled), "1" (allow unauthenticated provisioning), "2" (allow authenticated provisioning), and "3" (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details.
    
+phase1-peaplabelstring Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to "1" to force use of the new PEAP label.  See the wpa_supplicant documentation for more details.
    
+phase1-peapverstring Forces which PEAP version is used when PEAP is set as the EAP method in the "eap" property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to "0" or "1" to force that specific PEAP version.
    
+phase2-altsubject-matchesarray of string List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
+phase2-authstring Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
+phase2-autheapstring Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
+phase2-ca-certbyte array Contains the "phase 2" CA certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
+phase2-ca-cert-passwordstring The password used to access the "phase2" CA certificate stored in "phase2-ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+phase2-ca-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-ca-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
+phase2-ca-pathstring UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "phase2-ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
+phase2-client-certbyte array Contains the "phase 2" client certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.
    
+phase2-client-cert-passwordstring The password used to access the "phase2" client certificate stored in "phase2-client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+phase2-client-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-client-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
+phase2-domain-matchstring Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication. If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
+phase2-domain-suffix-matchstring Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
+phase2-private-keybyte array Contains the "phase 2" inner private key when the "phase2-auth" or "phase2-autheap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "phase2-private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "phase2-private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate.
    
+phase2-private-key-passwordstring The password used to decrypt the "phase 2" private key specified in the "phase2-private-key" property when the private key either uses the path scheme, or is a PKCS#12 format key.
    
+phase2-private-key-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-private-key-password" property. (see the section called “Secret flag types:” for flag values)
    
+phase2-subject-matchstring Substring to be matched against the subject of the certificate presented by the authentication server during the inner "phase 2" authentication. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match.
    
+pinstring PIN used for EAP authentication methods.
    
+pin-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "pin" property. (see the section called “Secret flag types:” for flag values)
    
+private-keybyte array Contains the private key when the "eap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: "private-key" is not a "secret" property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users.  Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data.
    
+private-key-passwordstring The password used to decrypt the private key specified in the "private-key" property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key.
    
+private-key-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key-password" property. (see the section called “Secret flag types:” for flag values)
    
+subject-matchstring Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match.
    
+system-ca-certsbooleanFALSEWhen TRUE, overrides the "ca-path" and "phase2-ca-path" properties using the system CA directory specified at configure time with the --system-ca-path switch.  The certificates in this directory are added to the verification chain in addition to any certificates specified by the "ca-cert" and "phase2-ca-cert" properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides "ca-cert" and "phase2-ca-cert" properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant).
    
+
    
+
    
+
    
+
    adsl setting
    
+
    ADSL Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+encapsulationstring Encapsulation of ADSL connection.  Can be "vcmux" or "llc".
    
+passwordstring Password used to authenticate with the ADSL service.
    
+password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
+protocolstring ADSL connection protocol.  Can be "pppoa", "pppoe" or "ipoatm".
    
+usernamestring Username used to authenticate with the ADSL service.
    
+vciuint320VCI of ADSL connection
    
+vpiuint320VPI of ADSL connection
    
+
    
+
    
+
    
+
    bluetooth setting
    
+
    Bluetooth Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+bdaddrbyte array The Bluetooth address of the device.
    
+typestring Either "dun" for Dial-Up Networking connections or "panu" for Personal Area Networking connections to devices supporting the NAP profile.
    
+
    
+
    
+
    
+
    bond setting
    
+
    Bonding Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the bond's interface name.
    
+optionsdict of string to string{'mode': 'balance-rr'}Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
+
    
+
    
+
    
+
    bridge setting
    
+
    Bridging Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+ageing-timeuint32300The Ethernet MAC address aging time, in seconds.
    
+forward-delayuint3215The Spanning Tree Protocol (STP) forwarding delay, in seconds.
    
+group-addressbyte array If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00.
    
+group-forward-maskuint320A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP.
    
+hello-timeuint322The Spanning Tree Protocol (STP) hello time, in seconds.
    
+interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the bridge's interface name.
    
+mac-addressbyte array If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the "ethernet.cloned-mac-address" is referred instead to generate the initial MAC address. Note that setting "ethernet.cloned-mac-address" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1
    
+max-ageuint3220The Spanning Tree Protocol (STP) maximum message age, in seconds.
    
+multicast-hash-maxuint324096Set maximum size of multicast hash table (value must be a power of 2).
    
+multicast-last-member-countuint322Set the number of queries the bridge will send before stopping forwarding a multicast group after a "leave" message has been received.
    
+multicast-last-member-intervaluint64100Set interval (in deciseconds) between queries to find remaining members of a group, after a "leave" message is received.
    
+multicast-membership-intervaluint6426000Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received.
    
+multicast-querierbooleanFALSEEnable or disable sending of multicast queries by the bridge. If not specified the option is disabled.
    
+multicast-querier-intervaluint6425500If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries.
    
+multicast-query-intervaluint6412500Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase.
    
+multicast-query-response-intervaluint641000Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge.
    
+multicast-query-use-ifaddrbooleanFALSEIf enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used.
    
+multicast-routerstring Sets bridge's multicast router. Multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled'. If not specified the default value is 'auto'.
    
+multicast-snoopingbooleanTRUEControls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved.
    
+multicast-startup-query-countuint322Set the number of IGMP queries to send during startup phase.
    
+multicast-startup-query-intervaluint643125Sets the time (in deciseconds) between queries sent out at startup to determine membership information.
    
+priorityuint3232768Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are "better"; the lowest priority bridge will be elected the root bridge.
    
+stpbooleanTRUEControls whether Spanning Tree Protocol (STP) is enabled for this bridge.
    
+vlan-default-pviduint321The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames.
    
+vlan-filteringbooleanFALSEControl whether VLAN filtering is enabled on the bridge.
    
+vlan-protocolstring If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'.
    
+vlan-stats-enabledbooleanFALSEControls whether per-VLAN stats accounting is enabled.
    
+vlansarray of vardict Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
+
    
+
    
+
    
+
    bridge-port setting
    
+
    Bridge Port Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+hairpin-modebooleanFALSEEnables or disables "hairpin mode" for the port, which allows frames to be sent back out through the port the frame was received on.
    
+path-costuint32100The Spanning Tree Protocol (STP) port cost for destinations via this port.
    
+priorityuint3232The Spanning Tree Protocol (STP) priority of this bridge port.
    
+vlansarray of vardict Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
+
    
+
    
+
    
+
    cdma setting
    
+
    CDMA-based Mobile Broadband Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+numberstring The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required.
    
+passwordstring The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
+password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
+usernamestring The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
+
    
+
    
+
    
+
    dcb setting
    
+
    Data Center Bridging Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+app-fcoe-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+app-fcoe-modestring"fabric"The FCoE controller mode; either "fabric" (default) or "vn2vn".
    
+app-fcoe-priorityint32-1The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the "app-fcoe-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+app-fip-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+app-fip-priorityint32-1The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the "app-fip-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+app-iscsi-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+app-iscsi-priorityint32-1The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the "app-iscsi-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+priority-bandwidtharray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.
    
+priority-flow-controlarray of uint32 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.
    
+priority-flow-control-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+priority-group-bandwidtharray of uint32 An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents.
    
+priority-group-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+priority-group-idarray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
    
+priority-strict-bandwidtharray of uint32 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.
    
+priority-traffic-classarray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.
    
+
    
+
    
+
    
+
    dummy setting
    
+
    Dummy Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+
    
+
    
+
    
+
    ethtool setting
    
+
    Ethtool Ethernet Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+
    
+
    
+
    
+
    generic setting
    
+
    Generic Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+
    
+
    
+
    
+
    gsm setting
    
+
    GSM-based Mobile Broadband Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+apnstring The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9.
    
+auto-configbooleanFALSEWhen TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database.
    
+device-idstring The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device.
    
+home-onlybooleanFALSEWhen TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+network-idstring The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.
    
+numberstring Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1
    
+passwordstring The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
+password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
+pinstring If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device.
    
+pin-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "pin" property. (see the section called “Secret flag types:” for flag values)
    
+sim-idstring The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" which contains a SIM card matching the given identifier.
    
+sim-operator-idstring A MCC/MNC string like "310260" or "21601" identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" and "sim-id" which contains a SIM card provisioned by the given operator.
    
+usernamestring The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
+
    
+
    
+
    
+
    infiniband setting
    
+
    Infiniband Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+mac-addressbyte array If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+p-keyint32-1The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka "the P_Key at index 0").  Otherwise it is a 16-bit unsigned integer, whose high bit is set if it is a "full membership" P_Key.
    
+parentstring The interface name of the parent device of this device. Normally NULL, but if the "p_key" property is set, then you must specify the base device by setting either this property or "mac-address".
    
+transport-modestring The IP-over-InfiniBand transport mode. Either "datagram" or "connected".
    
+
    
+
    
+
    
+
    ipv4 setting
    
+
    IPv4 Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+address-dataarray of vardict Array of IPv4 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses.
    
+addressesarray of array of uint32 Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet.
    
+dad-timeoutint32-1Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.
    
+dhcp-client-idstring A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.
    
+dhcp-fqdnstring If the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.
    
+dhcp-hostnamestring If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
+dhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
+dhcp-iaidstring A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
+dhcp-send-hostnamebooleanTRUEIf TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
+dhcp-timeoutint320A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
+dnsarray of uint32 Array of IP addresses of DNS servers (as network-byte-order integers)
    
+dns-optionsarray of string Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
+dns-priorityint320DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
+dns-searcharray of string Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
+gatewaystring The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
+ignore-auto-dnsbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
+ignore-auto-routesbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
+may-failbooleanTRUEIf TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
+methodstring IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
+never-defaultbooleanFALSEIf TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
+route-dataarray of vardict Array of IPv4 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'gateway' entry, containing the gateway IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes.
    
+route-metricint64-1The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
+route-tableuint320Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
+routesarray of array of uint32 Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv4 route structures.  Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)
    
+
    
+
    
+
    
+
    ipv6 setting
    
+
    IPv6 Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+addr-gen-modeint321Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by "ip6-privacy" property and it does not affect the temporary addresses configured with this option.
    
+address-dataarray of vardict Array of IPv6 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses.
    
+addressesarray of legacy IPv6 address struct (a(ayuay)) Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet.
    
+dad-timeoutint32-1Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.
    
+dhcp-duidstring A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the "${DEVICE}" or "${MAC}" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed.
    
+dhcp-hostnamestring If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
+dhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
+dhcp-iaidstring A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
+dhcp-send-hostnamebooleanTRUEIf TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
+dhcp-timeoutint320A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
+dnsarray of byte array Array of IP addresses of DNS servers (in network byte order)
    
+dns-optionsarray of string Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
+dns-priorityint320DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
+dns-searcharray of string Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
+gatewaystring The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
+ignore-auto-dnsbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
+ignore-auto-routesbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
+ip6-privacyNMSettingIP6ConfigPrivacy (int32) Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to "-1" (unknown) means fallback to global configuration "ipv6.ip6-privacy". If also global configuration is unspecified or set to "-1", fallback to read "/proc/sys/net/ipv6/conf/default/use_tempaddr". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the "addr-gen-mode" property's "stable-privacy" setting as another way of avoiding host tracking with IPv6 addresses.
    
+may-failbooleanTRUEIf TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
+methodstring IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
+never-defaultbooleanFALSEIf TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
+ra-timeoutint320A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity.
    
+route-dataarray of vardict Array of IPv6 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'next-hop' entry, containing the next hop IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes.
    
+route-metricint64-1The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
+route-tableuint320Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
+routesarray of legacy IPv6 route struct (a(ayuayu)) Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv6 route structures.  Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device.
    
+tokenstring Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode.
    
+
    
+
    
+
    
+
    ip-tunnel setting
    
+
    IP Tunneling Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+encapsulation-limituint320How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels.
    
+flagsuint320Tunnel flags. Currently the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels.
    
+flow-labeluint320The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels.
    
+input-keystring The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
+localstring The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address.
    
+modeuint320The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2).
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments.
    
+output-keystring The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
+parentstring If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface.
    
+path-mtu-discoverybooleanTRUEWhether to enable Path MTU Discovery on this tunnel.
    
+remotestring The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address.
    
+tosuint320The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets.
    
+ttluint320The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value.
    
+
    
+
    
+
    
+
    macsec setting
    
+
    MACSec Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+encryptbooleanTRUEWhether the transmitted traffic must be encrypted.
    
+mka-cakstring The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement.
    
+mka-cak-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "mka-cak" property. (see the section called “Secret flag types:” for flag values)
    
+mka-cknstring The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement.
    
+modeint320Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained.
    
+parentstring If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+portint321The port component of the SCI (Secure Channel Identifier), between 1 and 65534.
    
+send-scibooleanTRUESpecifies whether the SCI (Secure Channel Identifier) is included in every packet.
    
+validationint322Specifies the validation mode for incoming frames.
    
+
    
+
    
+
    
+
    macvlan setting
    
+
    MAC VLAN Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+modeuint320The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device.
    
+parentstring If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+promiscuousbooleanTRUEWhether the interface should be put in promiscuous mode.
    
+tapbooleanFALSEWhether the interface should be a MACVTAP.
    
+
    
+
    
+
    
+
    match setting
    
+
    Match settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+driverarray of string A list of driver names to match. Each element is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate driver name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+interface-namearray of string A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+kernel-command-linearray of string A list of kernel command line arguments to match. This may be used to check whether a specific kernel command line option is set (or if prefixed with the exclamation mark unset). The argument must either be a single word, or an assignment (i.e. two words, separated "="). In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is looked for with right and left hand side matching.
    
+patharray of string A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form "pci-$domain:$bus:$device.$function", where each variable is an hexadecimal value; for example "pci-0000:0a:00.0". The path of a device can be obtained with "udevadm info /sys/class/net/$dev | grep ID_PATH=" or by looking at the "path" property exported by NetworkManager ("nmcli -f general.path device show $dev"). Each element of the list is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate path is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+
    
+
    
+
    
+
    802-11-olpc-mesh setting
    
+
    OLPC Wireless Mesh Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+channeluint320Channel on which the mesh network to join is located.
    
+dhcp-anycast-addressbyte array Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request.
    
+ssidbyte array SSID of the mesh network to join.
    
+
    
+
    
+
    
+
    ovs-bridge setting
    
+
    OvsBridge Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+datapath-typestring The data path type. One of "system", "netdev" or empty.
    
+fail-modestring The bridge failure mode. One of "secure", "standalone" or empty.
    
+mcast-snooping-enablebooleanFALSEEnable or disable multicast snooping.
    
+rstp-enablebooleanFALSEEnable or disable RSTP.
    
+stp-enablebooleanFALSEEnable or disable STP.
    
+
    
+
    
+
    
+
    ovs-dpdk setting
    
+
    OvsDpdk Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+devargsstring Open vSwitch DPDK device arguments.
    
+
    
+
    
+
    
+
    ovs-interface setting
    
+
    Open vSwitch Interface Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+typestring The interface type. Either "internal", "system", "patch", "dpdk", or empty.
    
+
    
+
    
+
    
+
    ovs-patch setting
    
+
    OvsPatch Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+peerstring Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer.
    
+
    
+
    
+
    
+
    ovs-port setting
    
+
    OvsPort Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+bond-downdelayuint320The time port must be inactive in order to be considered down.
    
+bond-modestring Bonding mode. One of "active-backup", "balance-slb", or "balance-tcp".
    
+bond-updelayuint320The time port must be active before it starts forwarding traffic.
    
+lacpstring LACP mode. One of "active", "off", or "passive".
    
+taguint320The VLAN tag in the range 0-4095.
    
+vlan-modestring The VLAN mode. One of "access", "native-tagged", "native-untagged", "trunk" or unset.
    
+
    
+
    
+
    
+
    ppp setting
    
+
    Point-to-Point Protocol Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+bauduint320If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed.
    
+crtsctsbooleanFALSEIf TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals.  This value should normally be set to FALSE.
    
+lcp-echo-failureuint320If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer.  The "lcp-echo-interval" property must also be set to a non-zero value if this property is used.
    
+lcp-echo-intervaluint320If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value).  Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this.
    
+mppe-statefulbooleanFALSEIf TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE.
    
+mruuint320If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384.
    
+mtuuint320If non-zero, instruct pppd to send packets no larger than the specified size.
    
+no-vj-compbooleanFALSEIf TRUE, Van Jacobsen TCP header compression will not be requested.
    
+noauthbooleanTRUEIf TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE.
    
+nobsdcompbooleanFALSEIf TRUE, BSD compression will not be requested.
    
+nodeflatebooleanFALSEIf TRUE, "deflate" compression will not be requested.
    
+refuse-chapbooleanFALSEIf TRUE, the CHAP authentication method will not be used.
    
+refuse-eapbooleanFALSEIf TRUE, the EAP authentication method will not be used.
    
+refuse-mschapbooleanFALSEIf TRUE, the MSCHAP authentication method will not be used.
    
+refuse-mschapv2booleanFALSEIf TRUE, the MSCHAPv2 authentication method will not be used.
    
+refuse-papbooleanFALSEIf TRUE, the PAP authentication method will not be used.
    
+require-mppebooleanFALSEIf TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections.
    
+require-mppe-128booleanFALSEIf TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the "require-mppe" property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail.
    
+
    
+
    
+
    
+
    pppoe setting
    
+
    PPP-over-Ethernet Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+parentstring If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in "interface-name" of NMSettingConnection.
    
+passwordstring Password used to authenticate with the PPPoE service.
    
+password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
+servicestring If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required.
    
+usernamestring Username used to authenticate with the PPPoE service.
    
+
    
+
    
+
    
+
    proxy setting
    
+
    WWW Proxy Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+browser-onlybooleanFALSEWhether the proxy configuration is for browser only.
    
+methodint320Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)
    
+pac-scriptstring PAC script for the connection.
    
+pac-urlstring PAC URL for obtaining PAC file.
    
+
    
+
    
+
    
+
    serial setting
    
+
    Serial Link Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+bauduint3257600Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed.
    
+bitsuint328Byte-width of the serial communication. The 8 in "8n1" for example.
    
+paritybyte The connection parity: 69 (ASCII 'E') for even parity, 111 (ASCII 'o') for odd, 110 (ASCII 'n') for none.
    
+send-delayuint640Time to delay between each byte sent to the modem, in microseconds.
    
+stopbitsuint321Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in "8n1" for example.
    
+
    
+
    
+
    
+
    sriov setting
    
+
    SR-IOV settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+autoprobe-driversNMTernary (int32) Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1).
    
+total-vfsuint320The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection.
    
+vfsarray of vardict Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.
    
+
    
+
    
+
    
+
    tc setting
    
+
    Linux Traffic Control Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+qdiscsarray of vardict Array of TC queueing disciplines.
    
+tfiltersarray of vardict Array of TC traffic filters.
    
+
    
+
    
+
    
+
    team setting
    
+
    Teaming Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+configstring The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details.
    
+interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the team's interface name.
    
+link-watchersarray of vardict Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
+mcast-rejoin-countint32-1Corresponds to the teamd mcast_rejoin.count.
    
+mcast-rejoin-intervalint32-1Corresponds to the teamd mcast_rejoin.interval.
    
+notify-peers-countint32-1Corresponds to the teamd notify_peers.count.
    
+notify-peers-intervalint32-1Corresponds to the teamd notify_peers.interval.
    
+runnerstring Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random".
    
+runner-activebooleanTRUECorresponds to the teamd runner.active.
    
+runner-agg-select-policystring Corresponds to the teamd runner.agg_select_policy.
    
+runner-fast-ratebooleanFALSECorresponds to the teamd runner.fast_rate.
    
+runner-hwaddr-policystring Corresponds to the teamd runner.hwaddr_policy.
    
+runner-min-portsint32-1Corresponds to the teamd runner.min_ports.
    
+runner-sys-prioint32-1Corresponds to the teamd runner.sys_prio.
    
+runner-tx-balancerstring Corresponds to the teamd runner.tx_balancer.name.
    
+runner-tx-balancer-intervalint32-1Corresponds to the teamd runner.tx_balancer.interval.
    
+runner-tx-hasharray of string Corresponds to the teamd runner.tx_hash.
    
+
    
+
    
+
    
+
    team-port setting
    
+
    Team Port Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+configstring The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details.
    
+lacp-keyint32-1Corresponds to the teamd ports.PORTIFNAME.lacp_key.
    
+lacp-prioint32-1Corresponds to the teamd ports.PORTIFNAME.lacp_prio.
    
+link-watchersarray of vardict Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
+prioint320Corresponds to the teamd ports.PORTIFNAME.prio.
    
+queue-idint32-1Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config.
    
+stickybooleanFALSECorresponds to the teamd ports.PORTIFNAME.sticky.
    
+
    
+
    
+
    
+
    tun setting
    
+
    Tunnel Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+groupstring The group ID which will own the device. If set to NULL everyone will be able to use the device.
    
+modeuint321The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one.
    
+multi-queuebooleanFALSEIf the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue.
    
+ownerstring The user ID which will own the device. If set to NULL everyone will be able to use the device.
    
+pibooleanFALSEIf TRUE the interface will prepend a 4 byte header describing the physical interface to the packets.
    
+vnet-hdrbooleanFALSEIf TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header.
    
+
    
+
    
+
    
+
    user setting
    
+
    General User Profile Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+datadict of string to string{}A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length.
    
+
    
+
    
+
    
+
    vlan setting
    
+
    VLAN Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+egress-priority-maparray of string For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
+flagsNMVlanFlags (uint32) One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.
    
+iduint320The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.
    
+ingress-priority-maparray of string For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
+interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the vlan's interface name.
    
+parentstring If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+
    
+
    
+
    
+
    vpn setting
    
+
    VPN Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+datadict of string to string{}Dictionary of key/value pairs of VPN plugin specific data.  Both keys and values must be strings.
    
+persistentbooleanFALSEIf the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected.
    
+secretsdict of string to string{}Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys.  Both keys and values must be strings.
    
+service-typestring D-Bus service name of the VPN plugin that this setting uses to connect to its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin.
    
+timeoutuint320Timeout for the VPN service to establish the connection. Some services may take quite a long time to connect. Value of 0 means a default timeout, which is 60 seconds (unless overridden by vpn.timeout in configuration file). Values greater than zero mean timeout in seconds.
    
+user-namestring If the VPN connection requires a user name for authentication, that name should be provided here.  If the connection is available to more than one user, and the VPN requires each user to supply a different name, then leave this property empty.  If this property is empty, NetworkManager will automatically supply the username of the user which requested the VPN connection.
    
+
    
+
    
+
    
+
    vrf setting
    
+
    VRF settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+tableuint320The routing table for this VRF.
    
+
    
+
    
+
    
+
    vxlan setting
    
+
    VXLAN Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+ageinguint32300Specifies the lifetime in seconds of FDB entries learnt by the kernel.
    
+destination-portuint328472Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
    
+iduint320Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use.
    
+l2-missbooleanFALSESpecifies whether netlink LL ADDR miss notifications are generated.
    
+l3-missbooleanFALSESpecifies whether netlink IP ADDR miss notifications are generated.
    
+learningbooleanTRUESpecifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.
    
+limituint320Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.
    
+localstring If given, specifies the source IP address to use in outgoing packets.
    
+parentstring If given, specifies the parent interface name or parent connection UUID.
    
+proxybooleanFALSESpecifies whether ARP proxy is turned on.
    
+remotestring Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.
    
+rscbooleanFALSESpecifies whether route short circuit is turned on.
    
+source-port-maxuint320Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
+source-port-minuint320Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
+tosuint320Specifies the TOS value to use in outgoing packets.
    
+ttluint320Specifies the time-to-live value to use in outgoing packets.
    
+
    
+
    
+
    
+
    wifi-p2p setting
    
+
    Wi-Fi P2P Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+peerstring The P2P device that should be connected to. Currently this is the only way to create or join a group.
    
+wfd-iesbyte array The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.
    
+wps-methoduint320Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.
    
+
    
+
    
+
    
+
    wimax setting
    
+
    WiMax Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+mac-addressbyte array If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1
    
+network-namestring Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1
    
+
    
+
    
+
    
+
    802-3-ethernet setting
    
+
    Wired Ethernet Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+assigned-mac-addressstring The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
    
+auto-negotiatebooleanFALSEWhen TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.
    
+cloned-mac-addressbyte array This D-Bus field is deprecated in favor of "assigned-mac-address" which is more flexible and allows specifying special variants like "random". For libnm and nmcli, this field is called "cloned-mac-address".
    
+duplexstring When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.
    
+generate-mac-address-maskstring With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
+mac-addressbyte array If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+mac-address-blacklistarray of string If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
+portstring Specific port type to use if the device supports multiple attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored.
    
+s390-nettypestring s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems.
    
+s390-optionsdict of string to string{}Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include "portno", "layer2", "portname", "protocol", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
+s390-subchannelsarray of string Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
    
+speeduint320When a value greater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.
    
+wake-on-lanuint321The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
+wake-on-lan-passwordstring If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.
    
+
    
+
    
+
    
+
    wireguard setting
    
+
    WireGuard Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+fwmarkuint320The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that "ip4-auto-default-route" or "ip6-auto-default-route" enabled, implies to automatically choose a fwmark.
    
+ip4-auto-default-routeNMTernary (int32) Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route from wireguard.peer-routes will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, an unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto and what WireGuard calls "Improved Rule-based Routing". Note that for this automatism to work, you usually don't want to set ipv4.gateway, because that will result in a conflicting default route. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips.
    
+ip6-auto-default-routeNMTernary (int32) Like ip4-auto-default-route, but for the IPv6 default route.
    
+listen-portuint320The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.
    
+peer-routesbooleanTRUEWhether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. Usually you want this automatism enabled. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively. Note that if the peer's AllowedIPs is "0.0.0.0/0" or "::/0" and the profile's ipv4.never-default or ipv6.never-default setting is enabled, the peer route for this peer won't be added automatically.
    
+peersarray of 'a{sv}' Array of dictionaries for the WireGuard peers.
    
+private-keystring The 256 bit private-key in base64 encoding.
    
+private-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key" property. (see the section called “Secret flag types:” for flag values)
    
+
    
+
    
+
    
+
    802-11-wireless setting
    
+
    Wi-Fi Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+assigned-mac-addressstring The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
    
+bandstring 802.11 frequency band of the network.  One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.
    
+bssidbyte array If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.
    
+channeluint320Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the "band" property to be set.
    
+cloned-mac-addressbyte array This D-Bus field is deprecated in favor of "assigned-mac-address" which is more flexible and allows specifying special variants like "random". For libnm and nmcli, this field is called "cloned-mac-address".
    
+generate-mac-address-maskstring With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
+hiddenbooleanFALSEIf TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air.
    
+mac-addressbyte array If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+mac-address-blacklistarray of string A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55").
    
+mac-address-randomizationuint320One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1
    
+modestring Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap".  If blank, infrastructure is assumed.
    
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
+powersaveuint320One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.
    
+rateuint320If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate.
    
+security  This property is deprecated, but can be set to the value '802-11-wireless-security' when a wireless security setting is also present in the connection dictionary, for compatibility with very old NetworkManager daemons.
    
+seen-bssidsarray of string A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.
    
+ssidbyte array SSID of the Wi-Fi network. Must be specified.
    
+tx-poweruint320If non-zero, directs the device to use the specified transmit power. Units are dBm.  This property is highly driver dependent and not all devices support setting a static transmit power.
    
+wake-on-wlanuint321The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
+
    
+
    
+
    
+
    802-11-wireless-security setting
    
+
    Wi-Fi Security Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+auth-algstring When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here.  One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.
    
+filsint320Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.
    
+grouparray of string A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
    
+key-mgmtstring Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security.
    
+leap-passwordstring The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
+leap-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "leap-password" property. (see the section called “Secret flag types:” for flag values)
    
+leap-usernamestring The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
+pairwisearray of string A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".
    
+pmfint320Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.
    
+protoarray of string List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.
    
+pskstring Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
    
+psk-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "psk" property. (see the section called “Secret flag types:” for flag values)
    
+wep-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. (see the section called “Secret flag types:” for flag values)
    
+wep-key-typeNMWepKeyType (uint32) Controls the interpretation of WEP keys.  Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.
    
+wep-key0string Index 0 WEP key.  This is the WEP key used in most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+wep-key1string Index 1 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+wep-key2string Index 2 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+wep-key3string Index 3 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+wep-tx-keyidxuint320When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here.  Valid values are 0 (default key) through 3.  Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
    
+wps-methoduint320Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1.
    
+
    
+
    
+
    
+
    wpan setting
    
+
    IEEE 802.15.4 (WPAN) MAC Settings.
    
+
    
++++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    





    Key NameValue TypeDefault ValueValue Description
    
+channelint32-1IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
+mac-addressstring If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches.
    
+pageint32-1IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
+pan-iduint3265535IEEE 802.15.4 Personal Area Network (PAN) identifier.
    
+short-addressuint3265535Short IEEE 802.15.4 address to be used within a restricted environment.
    
+
    
+
    
+
    
+
    Secret flag types:
    
+
    
+            Each password or secret property in a setting has an associated flags property
+            that describes how to handle that secret. The flags property is a bitfield
+            that contains zero or more of the following values logically OR-ed together.
+          
    
+
      
+
    • 0x0 (none) - the system is responsible for providing and storing this secret. This
+              may be required so that secrets are already available before the user logs in.
+              It also commonly means that the secret will be stored in plain text on disk, accessible
+              to root only. For example via the keyfile settings plugin as described in the "PLUGINS" section
+              in NetworkManager.conf(5).
+              
      • 
+
    • 0x1 (agent-owned) - a user-session secret agent is responsible for providing and storing
+              this secret; when it is required, agents will be asked to provide it.
      • 
+
    • 0x2 (not-saved) - this secret should not be saved but should be requested from the user
+              each time it is required. This flag should be used for One-Time-Pad secrets, PIN codes from hardware tokens,
+              or if the user simply does not want to save the secret.
      • 
+
    • 0x4 (not-required) - in some situations it cannot be automatically determined that a secret
+              is required or not. This flag hints that the secret is not required and should not be requested from the user.
      • 
+
    
+
    
+
    
+
    
+
    Files
    
+
    /etc/NetworkManager/system-connections or distro plugin-specific location
    
+
    
+
    
+
    See Also
    
+
    nm-settings-nmcli(5),
+        nm-settings-keyfile(5),
+        NetworkManager(8),
+        nmcli(1),
+        nmcli-examples(7),
+        NetworkManager.conf(5)
    
+
    
+
    
+
    
+
    Generated by GTK-Doc V1.32
    
+
+
\ No newline at end of file
diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html
index 03ebe64f..5b8eb57f 100644
--- a/docs/api/html/nm-settings-ifcfg-rh.html
+++ b/docs/api/html/nm-settings-ifcfg-rh.html
@@ -251,7 +251,7 @@ DEVICETYPE=TeamPort
           are NetworkManager specific extensions not understood by traditional initscripts.
         
    
 
    
-
    Table 38. 6lowpan setting
    
+
    Table 11. 6lowpan setting
    
 
    @@ -269,7 +269,7 @@ DEVICETYPE=TeamPort
 
    
 
 

    
 
    
 
    
-
    Table 39. 802-1x setting
    
+
    Table 12. 802-1x setting
    
 
    @@ -497,7 +497,7 @@ Example: IEEE_8021X_INNER_CLIENT_CERT=/home/joe/mycert.crt
-
+
@@ -536,7 +536,7 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12
-
+
@@ -557,7 +557,7 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12
-
+
@@ -597,7 +597,7 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12
    
 
 

 
    IEEE_8021X_PASSWORD_FLAGS(+)
 
  Password flags for IEEE_8021X_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)Password flags for IEEE_8021X_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
 
    
 
    
 password-raw
 IEEE_8021X_PRIVATE_KEY_PASSWORD_FLAGS(+)
 
  Password flags for IEEE_8021X_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)Password flags for IEEE_8021X_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
 
    
 
    
 phase2-private-key
 IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD_FLAGS(+)
 
  Password flags for IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)Password flags for IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
 
    
 
    
 pin
 
    
 
    
 
    
-
    Table 40. bond setting
    
+
    Table 13. bond setting
    
 
    @@ -622,7 +622,7 @@ Example: BONDING_OPTS="miimon=100 mode=broadcast"
    
 
 

 
    
 
    
 
    
-
    Table 41. bridge-port setting
    
+
    Table 14. bridge-port setting
    
 
    @@ -671,7 +671,7 @@ Example: BRIDGE_PORT_VLANS="1 pvid untagged,20,300-400 untagged"
 
    
 
 

    
 
    
 
    
-
    Table 42. bridge setting
    
+
    Table 15. bridge setting
    
 
    @@ -825,11 +825,92 @@ Example: BRIDGING_OPTS="multicast_query-use_ifaddr=1"
 
 Example: BRIDGING_OPTS="multicast_querier=1"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    
 
 

 
    multicast-hash-maxBRIDGING_OPTS: multicast_hash_max=4096
+
+
+Example: BRIDGING_OPTS="multicast_hash_max=8192"
    multicast-last-member-countBRIDGING_OPTS: multicast_last_member_count=2
+
+
+Example: BRIDGING_OPTS="multicast_last_member_count=4"
    multicast-last-member-intervalBRIDGING_OPTS: multicast_last_member_interval=100
+
+
+Example: BRIDGING_OPTS="multicast_last_member_interval=200"
    multicast-membership-intervalBRIDGING_OPTS: multicast_membership_interval=26000
+
+
+Example: BRIDGING_OPTS="multicast_membership_interval=16000"
    multicast-querier-intervalBRIDGING_OPTS: multicast_querier_interval=25500
+
+
+Example: BRIDGING_OPTS="multicast_querier_interval=20000"
    multicast-query-intervalBRIDGING_OPTS: multicast_query_interval=12500
+
+
+Example: BRIDGING_OPTS="multicast_query_interval=22500"
    multicast-query-response-intervalBRIDGING_OPTS: multicast_query_response_interval=1000
+
+
+Example: BRIDGING_OPTS="multicast_query_response_interval=2000"
    multicast-startup-query-countBRIDGING_OPTS: multicast_startup_query_count=2
+
+
+Example: BRIDGING_OPTS="multicast_startup_query_count=4"
    multicast-startup-query-intervalBRIDGING_OPTS: multicast_startup_query_interval=3125
+
+
+Example: BRIDGING_OPTS="multicast_startup_query_interval=4000"
    
     
 
    
 
    
 
    
-
    Table 43. connection setting
    
+
    Table 16. connection setting
    
 
    @@ -1033,11 +1114,21 @@ Example: DEVTIMEOUT=5
 
 Allowed values: timeout in seconds.
+
+
+
+
+
+
    
 
 

 
    mud-urlMUD_URL MUD_URL to be sent by device (See RFC 8520).
+
+Example: https://yourdevice.example.com/model.json
+
+Allowed values: a valid URL that points to recommended policy for this device
    
     
 
    
 
    
 
    
-
    Table 44. dcb setting
    
+
    Table 17. dcb setting
    
 
    @@ -1172,7 +1263,7 @@ Example: DCB_PG_UP2TC=01623701
           used explicitly to enable DCB so that the rest of the DCB_* variables can apply.
         
    
-
    Table 45. ethtool setting
    
+
    Table 18. ethtool setting
    
 
    
 
 

 
    @@ -1190,7 +1281,7 @@ Example: DCB_PG_UP2TC=01623701
    
 
 

 
    
 
    
 
    
-
    Table 46. infiniband setting
    
+
    Table 19. infiniband setting
    
 
    @@ -1245,7 +1336,7 @@ Example: PHYSDEV=ib0
    
 
 

 
    
 
    
 
    
-
    Table 47. ipv4 setting
    
+
    Table 20. ipv4 setting
    
 
    @@ -1413,7 +1504,7 @@ Example: DHCP_FQDN=foo.bar.com
    
 
 

 
    
 
    
 
    
-
    Table 48. ipv6 setting
    
+
    Table 21. ipv6 setting
    
 
    @@ -1596,7 +1687,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 49. match setting
    
+
    Table 22. match setting
    
 
    @@ -1610,11 +1701,18 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
-
+
+
+
+
+
+
    
 
 

    Default
 Description
 
    pathMATCH_PATH space-separated list of paths to match against the udev property ID_PATHS of devices
+
+Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"
    
 
    
 
    
 
    
-
    Table 50. ovs-bridge setting
    
+
    Table 23. ovs-bridge setting
    
 
    @@ -1632,7 +1730,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 51. ovs-dpdk setting
    
+
    Table 24. ovs-dpdk setting
    
 
    @@ -1650,7 +1748,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 52. ovs-interface setting
    
+
    Table 25. ovs-interface setting
    
 
    @@ -1668,7 +1766,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 53. ovs-patch setting
    
+
    Table 26. ovs-patch setting
    
 
    @@ -1686,7 +1784,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 54. ovs-port setting
    
+
    Table 27. ovs-port setting
    
 
    @@ -1704,7 +1802,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
 
    
 
 

    
 
    
 
    
-
    Table 55. proxy setting
    
+
    Table 28. proxy setting
    
 
    @@ -1757,7 +1855,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac
    
 
 

 
    
 
    
 
    
-
    Table 56. sriov setting
    
+
    Table 29. sriov setting
    
 
    @@ -1802,7 +1900,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1
    
 
 

 
    
 
    
 
    
-
    Table 57. tc setting
    
+
    Table 30. tc setting
    
 
    @@ -1837,7 +1935,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu
 
    
 
 

    
 
    
 
    
-
    Table 58. team-port setting
    
+
    Table 31. team-port setting
    
 
    @@ -1860,7 +1958,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu
 
    
 
 

    
 
    
 
    
-
    Table 59. team setting
    
+
    Table 32. team setting
    
 
    @@ -1883,7 +1981,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu
 
    
 
 

    
 
    
 
    
-
    Table 60. user setting
    
+
    Table 33. user setting
    
 
    @@ -1908,7 +2006,7 @@ Example: NM_USER_FOO__BAR=something
    
 
 

 
    
 
    
 
    
-
    Table 61. vlan setting
    
+
    Table 34. vlan setting
    
 
    @@ -1971,7 +2069,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12
    
 
 

 
    
 
    
 
    
-
    Table 62. vrf setting
    
+
    Table 35. vrf setting
    
 
    @@ -1989,7 +2087,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12
    
 
 

 
    
 
    
 
    
-
    Table 63. wifi-p2p setting
    
+
    Table 36. wifi-p2p setting
    
 
    @@ -2007,7 +2105,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12
    
 
 

 
    
 
    
 
    
-
    Table 64. 802-3-ethernet setting
    
+
    Table 37. 802-3-ethernet setting
    
 
    @@ -2108,7 +2206,7 @@ Allowed values: "qeth", "lcs" or "ctc"
    
 
 

 
    
 
    
 
    
-
    Table 65. wireguard setting
    
+
    Table 38. wireguard setting
    
 
    @@ -2126,7 +2224,7 @@ Allowed values: "qeth", "lcs" or "ctc"
    
 
 

 
    
 
    
 
    
-
    Table 66. 802-11-wireless-security setting
    
+
    Table 39. 802-11-wireless-security setting
    
 
    @@ -2245,7 +2343,7 @@ Allowed values: default, disable, optional, required
-
+
@@ -2258,7 +2356,7 @@ Allowed values: default, disable, optional, required
-
@@ -2274,7 +2372,7 @@ Example: WPA_PSK_FLAGS=user
-
+
@@ -2308,7 +2406,7 @@ Allowed values: default, disable, optional, required
    
 
 

 
    WEP_KEY_FLAGS(+)
 
  Password flags for KEY<i>, KEY_PASSPHRASE<i> password. (see the section called “Secret flag types:” for _FLAGS values)Password flags for KEY<i>, KEY_PASSPHRASE<i> password. (see the section called “Secret flag types:” for _FLAGS values)
 
    
 
    
 psk
 WPA_PSK_FLAGS(+)
 
  Password flags for WPA_PSK_FLAGS. (see the section called “Secret flag types:” for _FLAGS values)
+Password flags for WPA_PSK_FLAGS. (see the section called “Secret flag types:” for _FLAGS values)
 
 Example: WPA_PSK_FLAGS=user
 
    
 
    IEEE_8021X_PASSWORD_FLAGS(+)
 
  Password flags for IEEE_8021X_PASSWORD_FLAGS. (see the section called “Secret flag types:” for _FLAGS values)Password flags for IEEE_8021X_PASSWORD_FLAGS. (see the section called “Secret flag types:” for _FLAGS values)
 
    
 
    
 wep-key-type
 
    
 
    
 
    
-
    Table 67. 802-11-wireless setting
    
+
    Table 40. 802-11-wireless setting
    
 
    @@ -2456,7 +2554,7 @@ Allowed values: default, never, always
    
 
 

 
    
 
    
 
    
-
    Table 68. wpan setting
    
+
    Table 41. wpan setting
    
 
    @@ -2506,7 +2604,7 @@ Allowed values: default, never, always
    
 
    See Also
    
-
    nm-settings(5),
+
    nm-settings(5),
         nm-settings-keyfile(5),
         NetworkManager(8),
         NetworkManager.conf(5),
diff --git a/docs/api/html/nm-settings-keyfile.html b/docs/api/html/nm-settings-keyfile.html
index d18cc261..910aefb8 100644
--- a/docs/api/html/nm-settings-keyfile.html
+++ b/docs/api/html/nm-settings-keyfile.html
@@ -6,7 +6,7 @@
 
 
 
-
+
 
 
 
@@ -16,7 +16,7 @@
 
    
-
+
    
 
 

 
 
    
 Home
 UpPrevPrev
 Next
 
    
 
    
@@ -175,7 +175,7 @@ id=4
           There are several exceptions to this rule, mainly for making keyfile syntax easier
           for humans. The exceptions handled specially by keyfile
           plugin are listed below. Refer to
-          nm-settings(5)
+          nm-settings(5)
           for all available settings and properties and their description.
         
    
 
    Name aliases. 
@@ -189,7 +189,7 @@ id=4
 802-11-wireless-security  =  wifi-security
 
 
    
-
    Table 28. bridge setting (section)
    
+
    Table 1. bridge setting (section)
    
 
    @@ -214,7 +214,7 @@ Example: mac-address=00:22:68:12:79:A2 mac-address=0;34;104;18;1
 
    
 
 

    
 
    
 
    
-
    Table 29. infiniband setting (section)
    
+
    Table 2. infiniband setting (section)
    
 
    @@ -239,7 +239,7 @@ Example: mac-address= 80:00:00:6d:fe:80:00:00:00:00:00:00:00:02:
 
    
 
 

    
 
    
 
    
-
    Table 30. ipv4 setting (section)
    
+
    Table 3. ipv4 setting (section)
    
 
    @@ -290,7 +290,7 @@ Example: route1=8.8.8.0/24,10.1.1.1,77 route2=7.7.0.0/16
    
 
 

 
    
 
    
 
    
-
    Table 31. ipv6 setting (section)
    
+
    Table 4. ipv6 setting (section)
    
 
    @@ -341,7 +341,7 @@ Example: route1=2001:4860:4860::/64,2620:52:0:2219:222:68ff:fe11
 
    
 
 

    
 
    
 
    
-
    Table 32. serial setting (section)
    
+
    Table 5. serial setting (section)
    
 
    @@ -366,7 +366,7 @@ Example: parity=n
    
 
 

 
    
 
    
 
    
-
    Table 33. vpn setting (section)
    
+
    Table 6. vpn setting (section)
    
 
    @@ -401,7 +401,7 @@ Example: password=Popocatepetl
    
 
 

 
    
 
    
 
    
-
    Table 34. wifi-p2p setting (section)
    
+
    Table 7. wifi-p2p setting (section)
    
 
    @@ -424,7 +424,7 @@ Example: password=Popocatepetl
    
 
 

 
    
 
    
 
    
-
    Table 35. 802-3-ethernet setting (section)
    
+
    Table 8. 802-3-ethernet setting (section)
    
 
    @@ -463,7 +463,7 @@ Example: mac-address-blacklist= 00:22:68:12:79:A6;00:22:68:12:79
 
    
 
 

    
 
    
 
    
-
    Table 36. 802-11-wireless setting (section)
    
+
    Table 9. 802-11-wireless setting (section)
    
 
    @@ -510,7 +510,7 @@ Example: mac-address-blacklist= 00:22:68:12:79:A6;00:22:68:12:79
 
    
 
 

    
 
    
 
    
-
    Table 37. wpan setting (section)
    
+
    Table 10. wpan setting (section)
    
 
    @@ -558,7 +558,7 @@ Example: mac-address-blacklist= 00:22:68:12:79:A6;00:22:68:12:79
 
    
 
    See Also
    
-
    nm-settings(5),
+
    nm-settings(5),
         nm-settings-ifcfg-rh(5),
         NetworkManager(8),
         NetworkManager.conf(5),
diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html
new file mode 100644
index 00000000..c8bccf2a
--- /dev/null
+++ b/docs/api/html/nm-settings-nmcli.html
@@ -0,0 +1,4660 @@
+
+
+
+
+nm-settings-nmcli: NetworkManager Reference Manual
+
+
+
+
+
+
+
+
+
+
    
 
 

 
    
+
+
+
+
+
+
+
    
+
    
+
    
+
+
+
    
+
    nm-settings-nmcli
    
+
    nm-settings-nmcli — Description of settings and properties of NetworkManager connection profiles for nmcli
    
+
    
+
    
+
    Description
    
+
    
+          NetworkManager is based on a concept of connection profiles, sometimes referred to as
+          connections only. These connection profiles contain a network configuration. When
+          NetworkManager activates a connection profile on a network device the configuration will
+          be applied and an active network connection will be established. Users are free to create
+          as many connection profiles as they see fit. Thus they are flexible in having various network
+          configurations for different networking needs.
+        
    
+
    
+          NetworkManager provides an API for configuring connection profiles, for activating them
+          to configure the network, and inspecting the current network configuration. The command
+          line tool nmcli is a client application to NetworkManager that uses
+          this API. See nmcli(1)
+          for details.
+        
    
+
    
+          With commands like nmcli connection add, nmcli connection modify
+          and nmcli connection show, connection profiles can be created, modified
+          and inspected. A profile consists of properties. On D-Bus this follows the format
+          as described by nm-settings-dbus(5),
+          while this manual page describes the settings format how they are expected by nmcli.
+        
    
+
    
+          The settings and properties shown in tables below list all available connection
+          configuration options. However, note that not all settings are applicable to all
+          connection types. nmcli connection editor has also a built-in
+          describe command that can display description of particular settings
+          and properties of this page.
+        
    
+
    
+          The setting and
+          property can be abbreviated provided they are unique. The list below
+          also shows aliases that can be used unqualified instead of the full name. For example
+          connection.interface-name and ifname refer to the same
+          property.
+        
    
+
    
+
    connection setting
    
+
    General Connection Profile Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    auth-retries
    		
+
    The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently this only applies to 802-1x authentication.
    
+
    
+            Format: int32
    
+
    autoconnect
    		
+
    
+            Alias: autoconnect
    
+
    Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.
    
+
    
+            Format: boolean
    
+
    autoconnect-priority
    		
+
    The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority.
    
+
    
+            Format: int32
    
+
    autoconnect-retries
    		
+
    The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again.
    
+
    
+            Format: int32
    
+
    autoconnect-slaves
    		
+
    Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.
    
+
    
+            Format: NMSettingConnectionAutoconnectSlaves (int32)
    
+
    gateway-ping-timeout
    		
+
    If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping.
    
+
    
+            Format: uint32
    
+
    id
    		
+
    
+            Alias: con-name
    
+
    A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G".
    
+
    
+            Format: string
    
+
    interface-name
    		
+
    
+            Alias: ifname
    
+
    The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface.
    
+
    
+            Format: string
    
+
    lldp
    		
+
    Whether LLDP is enabled for the connection.
    
+
    
+            Format: int32
    
+
    llmnr
    		
+
    Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable LLMNR for the interface, "resolve" (1) do not register hostname but allow resolving of LLMNR host names If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "yes"). This feature requires a plugin which supports LLMNR. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
+
    
+            Format: int32
    
+
    master
    		
+
    
+            Alias: master
    
+
    Interface name of the master device or UUID of the master connection.
    
+
    
+            Format: string
    
+
    mdns
    		
+
    Whether mDNS is enabled for the connection. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable mDNS for the interface, "resolve" (1) do not register hostname but allow resolving of mDNS host names and "default" (-1) to allow lookup of a global default in NetworkManager.conf. If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "no"). This feature requires a plugin which supports mDNS. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
+
    
+            Format: int32
    
+
    metered
    		
+
    Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately.
    
+
    
+            Format: NMMetered (int32)
    
+
    mud-url
    		
+
    If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with "https://". The special value "none" is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is "none".
    
+
    
+            Format: string
    
+
    multi-connect
    		
+
    Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect.
    
+
    
+            Format: int32
    
+
    permissions
    		
+
    An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8.
    
+
    
+            Format: array of string
    
+
    read-only
    		
+
    FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.
    
+
    
+            Format: boolean
    
+
    secondaries
    		
+
    List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.
    
+
    
+            Format: array of string
    
+
    slave-type
    		
+
    
+            Alias: slave-type
    
+
    Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave.
    
+
    
+            Format: string
    
+
    stable-id
    		
+
    This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.
    
+
    
+            Format: string
    
+
    timestamp
    		
+
    The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).
    
+
    
+            Format: uint64
    
+
    type
    		
+
    
+            Alias: type
    
+
    Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc).
    
+
    
+            Format: string
    
+
    uuid
    		
+
    A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").
    
+
    
+            Format: string
    
+
    wait-device-timeout
    		
+
    Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.
    
+
    
+            Format: int32
    
+
    zone
    		
+
    The trust level of a the connection.  Free form case-insensitive string (for example "Home", "Work", "Public").  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    6lowpan setting
    
+
    6LoWPAN Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    802-1x setting
    
+
    IEEE 802.1x Authentication Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    altsubject-matches
    		
+
    List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
+
    
+            Format: array of string
    
+
    anonymous-identity
    		
+
    Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS.
    
+
    
+            Format: string
    
+
    auth-timeout
    		
+
    A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds.
    
+
    
+            Format: int32
    
+
    ca-cert
    		
+
    Contains the CA certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
+
    
+            Format: byte array
    
+
    ca-cert-password
    		
+
    The password used to access the CA certificate stored in "ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+
    
+            Format: string
    
+
    ca-cert-password-flags
    		
+
    Flags indicating how to handle the "ca-cert-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    ca-path
    		
+
    UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
+
    
+            Format: string
    
+
    client-cert
    		
+
    Contains the client certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte.
    
+
    
+            Format: byte array
    
+
    client-cert-password
    		
+
    The password used to access the client certificate stored in "client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+
    
+            Format: string
    
+
    client-cert-password-flags
    		
+
    Flags indicating how to handle the "client-cert-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    domain-match
    		
+
    Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
+
    
+            Format: string
    
+
    domain-suffix-match
    		
+
    Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
+
    
+            Format: string
    
+
    eap
    		
+
    The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast".  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
    
+
    
+            Format: array of string
    
+
    identity
    		
+
    Identity string for EAP authentication methods.  Often the user's user or login name.
    
+
    
+            Format: string
    
+
    optional
    		
+
    Whether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication.
    
+
    
+            Format: boolean
    
+
    pac-file
    		
+
    UTF-8 encoded file path containing PAC for EAP-FAST.
    
+
    
+            Format: string
    
+
    password
    		
+
    UTF-8 encoded password used for EAP authentication methods. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
+
    
+            Format: string
    
+
    password-flags
    		
+
    Flags indicating how to handle the "password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    password-raw
    		
+
    Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
+
    
+            Format: byte array
    
+
    password-raw-flags
    		
+
    Flags indicating how to handle the "password-raw" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    phase1-auth-flags
    		
+
    Specifies authentication flags to use in "phase 1" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details.
    
+
    
+            Format: uint32
    
+
    phase1-fast-provisioning
    		
+
    Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the "eap" property. Recognized values are "0" (disabled), "1" (allow unauthenticated provisioning), "2" (allow authenticated provisioning), and "3" (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details.
    
+
    
+            Format: string
    
+
    phase1-peaplabel
    		
+
    Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to "1" to force use of the new PEAP label.  See the wpa_supplicant documentation for more details.
    
+
    
+            Format: string
    
+
    phase1-peapver
    		
+
    Forces which PEAP version is used when PEAP is set as the EAP method in the "eap" property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to "0" or "1" to force that specific PEAP version.
    
+
    
+            Format: string
    
+
    phase2-altsubject-matches
    		
+
    List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
+
    
+            Format: array of string
    
+
    phase2-auth
    		
+
    Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
+
    
+            Format: string
    
+
    phase2-autheap
    		
+
    Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
+
    
+            Format: string
    
+
    phase2-ca-cert
    		
+
    Contains the "phase 2" CA certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
+
    
+            Format: byte array
    
+
    phase2-ca-cert-password
    		
+
    The password used to access the "phase2" CA certificate stored in "phase2-ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+
    
+            Format: string
    
+
    phase2-ca-cert-password-flags
    		
+
    Flags indicating how to handle the "phase2-ca-cert-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    phase2-ca-path
    		
+
    UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "phase2-ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
+
    
+            Format: string
    
+
    phase2-client-cert
    		
+
    Contains the "phase 2" client certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.
    
+
    
+            Format: byte array
    
+
    phase2-client-cert-password
    		
+
    The password used to access the "phase2" client certificate stored in "phase2-client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
+
    
+            Format: string
    
+
    phase2-client-cert-password-flags
    		
+
    Flags indicating how to handle the "phase2-client-cert-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    phase2-domain-match
    		
+
    Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication. If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
+
    
+            Format: string
    
+
    phase2-domain-suffix-match
    		
+
    Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
+
    
+            Format: string
    
+
    phase2-private-key
    		
+
    Contains the "phase 2" inner private key when the "phase2-auth" or "phase2-autheap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "phase2-private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "phase2-private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate.
    
+
    
+            Format: byte array
    
+
    phase2-private-key-password
    		
+
    The password used to decrypt the "phase 2" private key specified in the "phase2-private-key" property when the private key either uses the path scheme, or is a PKCS#12 format key.
    
+
    
+            Format: string
    
+
    phase2-private-key-password-flags
    		
+
    Flags indicating how to handle the "phase2-private-key-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    phase2-subject-match
    		
+
    Substring to be matched against the subject of the certificate presented by the authentication server during the inner "phase 2" authentication. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match.
    
+
    
+            Format: string
    
+
    pin
    		
+
    PIN used for EAP authentication methods.
    
+
    
+            Format: string
    
+
    pin-flags
    		
+
    Flags indicating how to handle the "pin" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    private-key
    		
+
    Contains the private key when the "eap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: "private-key" is not a "secret" property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users.  Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data.
    
+
    
+            Format: byte array
    
+
    private-key-password
    		
+
    The password used to decrypt the private key specified in the "private-key" property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key.
    
+
    
+            Format: string
    
+
    private-key-password-flags
    		
+
    Flags indicating how to handle the "private-key-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    subject-match
    		
+
    Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match.
    
+
    
+            Format: string
    
+
    system-ca-certs
    		
+
    When TRUE, overrides the "ca-path" and "phase2-ca-path" properties using the system CA directory specified at configure time with the --system-ca-path switch.  The certificates in this directory are added to the verification chain in addition to any certificates specified by the "ca-cert" and "phase2-ca-cert" properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides "ca-cert" and "phase2-ca-cert" properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant).
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    adsl setting
    
+
    ADSL Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    encapsulation
    		
+
    
+            Alias: encapsulation
    
+
    Encapsulation of ADSL connection.  Can be "vcmux" or "llc".
    
+
    
+            Format: string
    
+
    password
    		
+
    
+            Alias: password
    
+
    Password used to authenticate with the ADSL service.
    
+
    
+            Format: string
    
+
    password-flags
    		
+
    Flags indicating how to handle the "password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    protocol
    		
+
    
+            Alias: protocol
    
+
    ADSL connection protocol.  Can be "pppoa", "pppoe" or "ipoatm".
    
+
    
+            Format: string
    
+
    username
    		
+
    
+            Alias: username
    
+
    Username used to authenticate with the ADSL service.
    
+
    
+            Format: string
    
+
    vci
    		
+
    VCI of ADSL connection
    
+
    
+            Format: uint32
    
+
    vpi
    		
+
    VPI of ADSL connection
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    bluetooth setting
    
+
    Bluetooth Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
    



    bdaddr
    		
+
    
+            Alias: addr
    
+
    The Bluetooth address of the device.
    
+
    
+            Format: byte array
    
+
    type
    		
+
    
+            Alias: bt-type
    
+
    Either "dun" for Dial-Up Networking connections or "panu" for Personal Area Networking connections to devices supporting the NAP profile.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    bond setting
    
+
    Bonding Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    options
    		
+
    Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
+
    
+            Format: dict of string to string
    
+
    
+
    
+
    
+
    
+
    bridge setting
    
+
    Bridging Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    ageing-time
    		
+
    
+            Alias: ageing-time
    
+
    The Ethernet MAC address aging time, in seconds.
    
+
    
+            Format: uint32
    
+
    forward-delay
    		
+
    
+            Alias: forward-delay
    
+
    The Spanning Tree Protocol (STP) forwarding delay, in seconds.
    
+
    
+            Format: uint32
    
+
    group-address
    		
+
    If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00.
    
+
    
+            Format: byte array
    
+
    group-forward-mask
    		
+
    
+            Alias: group-forward-mask
    
+
    A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP.
    
+
    
+            Format: uint32
    
+
    hello-time
    		
+
    
+            Alias: hello-time
    
+
    The Spanning Tree Protocol (STP) hello time, in seconds.
    
+
    
+            Format: uint32
    
+
    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the "ethernet.cloned-mac-address" is referred instead to generate the initial MAC address. Note that setting "ethernet.cloned-mac-address" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1
    
+
    
+            Format: byte array
    
+
    max-age
    		
+
    
+            Alias: max-age
    
+
    The Spanning Tree Protocol (STP) maximum message age, in seconds.
    
+
    
+            Format: uint32
    
+
    multicast-hash-max
    		
+
    Set maximum size of multicast hash table (value must be a power of 2).
    
+
    
+            Format: uint32
    
+
    multicast-last-member-count
    		
+
    Set the number of queries the bridge will send before stopping forwarding a multicast group after a "leave" message has been received.
    
+
    
+            Format: uint32
    
+
    multicast-last-member-interval
    		
+
    Set interval (in deciseconds) between queries to find remaining members of a group, after a "leave" message is received.
    
+
    
+            Format: uint64
    
+
    multicast-membership-interval
    		
+
    Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received.
    
+
    
+            Format: uint64
    
+
    multicast-querier
    		
+
    Enable or disable sending of multicast queries by the bridge. If not specified the option is disabled.
    
+
    
+            Format: boolean
    
+
    multicast-querier-interval
    		
+
    If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries.
    
+
    
+            Format: uint64
    
+
    multicast-query-interval
    		
+
    Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase.
    
+
    
+            Format: uint64
    
+
    multicast-query-response-interval
    		
+
    Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge.
    
+
    
+            Format: uint64
    
+
    multicast-query-use-ifaddr
    		
+
    If enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used.
    
+
    
+            Format: boolean
    
+
    multicast-router
    		
+
    Sets bridge's multicast router. Multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled'. If not specified the default value is 'auto'.
    
+
    
+            Format: string
    
+
    multicast-snooping
    		
+
    
+            Alias: multicast-snooping
    
+
    Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved.
    
+
    
+            Format: boolean
    
+
    multicast-startup-query-count
    		
+
    Set the number of IGMP queries to send during startup phase.
    
+
    
+            Format: uint32
    
+
    multicast-startup-query-interval
    		
+
    Sets the time (in deciseconds) between queries sent out at startup to determine membership information.
    
+
    
+            Format: uint64
    
+
    priority
    		
+
    
+            Alias: priority
    
+
    Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are "better"; the lowest priority bridge will be elected the root bridge.
    
+
    
+            Format: uint32
    
+
    stp
    		
+
    
+            Alias: stp
    
+
    Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.
    
+
    
+            Format: boolean
    
+
    vlan-default-pvid
    		
+
    The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames.
    
+
    
+            Format: uint32
    
+
    vlan-filtering
    		
+
    Control whether VLAN filtering is enabled on the bridge.
    
+
    
+            Format: boolean
    
+
    vlan-protocol
    		
+
    If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'.
    
+
    
+            Format: string
    
+
    vlan-stats-enabled
    		
+
    Controls whether per-VLAN stats accounting is enabled.
    
+
    
+            Format: boolean
    
+
    vlans
    		
+
    Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
+
    
+            Format: array of vardict
    
+
    
+
    
+
    
+
    
+
    bridge-port setting
    
+
    Bridge Port Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    hairpin-mode
    		
+
    
+            Alias: hairpin
    
+
    Enables or disables "hairpin mode" for the port, which allows frames to be sent back out through the port the frame was received on.
    
+
    
+            Format: boolean
    
+
    path-cost
    		
+
    
+            Alias: path-cost
    
+
    The Spanning Tree Protocol (STP) port cost for destinations via this port.
    
+
    
+            Format: uint32
    
+
    priority
    		
+
    
+            Alias: priority
    
+
    The Spanning Tree Protocol (STP) priority of this bridge port.
    
+
    
+            Format: uint32
    
+
    vlans
    		
+
    Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
+
    
+            Format: array of vardict
    
+
    
+
    
+
    
+
    
+
    cdma setting
    
+
    CDMA-based Mobile Broadband Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    mtu
    		
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+
    
+            Format: uint32
    
+
    number
    		
+
    The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required.
    
+
    
+            Format: string
    
+
    password
    		
+
    
+            Alias: password
    
+
    The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
+
    
+            Format: string
    
+
    password-flags
    		
+
    Flags indicating how to handle the "password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    username
    		
+
    
+            Alias: user
    
+
    The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    dcb setting
    
+
    Data Center Bridging Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    app-fcoe-flags
    		
+
    Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+
    
+            Format: NMSettingDcbFlags (uint32)
    
+
    app-fcoe-mode
    		
+
    The FCoE controller mode; either "fabric" (default) or "vn2vn".
    
+
    
+            Format: string
    
+
    app-fcoe-priority
    		
+
    The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the "app-fcoe-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+
    
+            Format: int32
    
+
    app-fip-flags
    		
+
    Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+
    
+            Format: NMSettingDcbFlags (uint32)
    
+
    app-fip-priority
    		
+
    The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the "app-fip-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+
    
+            Format: int32
    
+
    app-iscsi-flags
    		
+
    Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+
    
+            Format: NMSettingDcbFlags (uint32)
    
+
    app-iscsi-priority
    		
+
    The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the "app-iscsi-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
+
    
+            Format: int32
    
+
    priority-bandwidth
    		
+
    An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.
    
+
    
+            Format: array of uint32
    
+
    priority-flow-control
    		
+
    An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.
    
+
    
+            Format: array of uint32
    
+
    priority-flow-control-flags
    		
+
    Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+
    
+            Format: NMSettingDcbFlags (uint32)
    
+
    priority-group-bandwidth
    		
+
    An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents.
    
+
    
+            Format: array of uint32
    
+
    priority-group-flags
    		
+
    Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
+
    
+            Format: NMSettingDcbFlags (uint32)
    
+
    priority-group-id
    		
+
    An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
    
+
    
+            Format: array of uint32
    
+
    priority-strict-bandwidth
    		
+
    An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.
    
+
    
+            Format: array of uint32
    
+
    priority-traffic-class
    		
+
    An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.
    
+
    
+            Format: array of uint32
    
+
    
+
    
+
    
+
    
+
    ethtool setting
    
+
    Ethtool Ethernet Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    coalesce-adaptive-rx
    coalesce-adaptive-tx
    coalesce-pkt-rate-high
    coalesce-pkt-rate-low
    coalesce-rx-frames
    coalesce-rx-frames-high
    coalesce-rx-frames-irq
    coalesce-rx-frames-low
    coalesce-rx-usecs
    coalesce-rx-usecs-high
    coalesce-rx-usecs-irq
    coalesce-rx-usecs-low
    coalesce-sample-interval
    coalesce-stats-block-usecs
    coalesce-tx-frames
    coalesce-tx-frames-high
    coalesce-tx-frames-irq
    coalesce-tx-frames-low
    coalesce-tx-usecs
    coalesce-tx-usecs-high
    coalesce-tx-usecs-irq
    coalesce-tx-usecs-low
    feature-esp-hw-offload
    feature-esp-tx-csum-hw-offload
    feature-fcoe-mtu
    feature-gro
    feature-gso
    feature-highdma
    feature-hw-tc-offload
    feature-l2-fwd-offload
    feature-loopback
    feature-lro
    feature-ntuple
    feature-rx
    feature-rx-all
    feature-rx-fcs
    feature-rx-gro-hw
    feature-rx-udp_tunnel-port-offload
    feature-rx-vlan-filter
    feature-rx-vlan-stag-filter
    feature-rx-vlan-stag-hw-parse
    feature-rxhash
    feature-rxvlan
    feature-sg
    feature-tls-hw-record
    feature-tls-hw-tx-offload
    feature-tso
    feature-tx
    feature-tx-checksum-fcoe-crc
    feature-tx-checksum-ip-generic
    feature-tx-checksum-ipv4
    feature-tx-checksum-ipv6
    feature-tx-checksum-sctp
    feature-tx-esp-segmentation
    feature-tx-fcoe-segmentation
    feature-tx-gre-csum-segmentation
    feature-tx-gre-segmentation
    feature-tx-gso-partial
    feature-tx-gso-robust
    feature-tx-ipxip4-segmentation
    feature-tx-ipxip6-segmentation
    feature-tx-nocache-copy
    feature-tx-scatter-gather
    feature-tx-scatter-gather-fraglist
    feature-tx-sctp-segmentation
    feature-tx-tcp-ecn-segmentation
    feature-tx-tcp-mangleid-segmentation
    feature-tx-tcp-segmentation
    feature-tx-tcp6-segmentation
    feature-tx-udp-segmentation
    feature-tx-udp_tnl-csum-segmentation
    feature-tx-udp_tnl-segmentation
    feature-tx-vlan-stag-hw-insert
    feature-txvlan
    ring-rx
    ring-rx-jumbo
    ring-rx-mini
    ring-tx
    
+
    
+
    
+
    
+
    gsm setting
    
+
    GSM-based Mobile Broadband Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    apn
    		
+
    
+            Alias: apn
    
+
    The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9.
    
+
    
+            Format: string
    
+
    auto-config
    		
+
    When TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database.
    
+
    
+            Format: boolean
    
+
    device-id
    		
+
    The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device.
    
+
    
+            Format: string
    
+
    home-only
    		
+
    When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.
    
+
    
+            Format: boolean
    
+
    mtu
    		
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+
    
+            Format: uint32
    
+
    network-id
    		
+
    The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.
    
+
    
+            Format: string
    
+
    number
    		
+
    Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1
    
+
    
+            Format: string
    
+
    password
    		
+
    
+            Alias: password
    
+
    The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
+
    
+            Format: string
    
+
    password-flags
    		
+
    Flags indicating how to handle the "password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    pin
    		
+
    If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device.
    
+
    
+            Format: string
    
+
    pin-flags
    		
+
    Flags indicating how to handle the "pin" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    sim-id
    		
+
    The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" which contains a SIM card matching the given identifier.
    
+
    
+            Format: string
    
+
    sim-operator-id
    		
+
    A MCC/MNC string like "310260" or "21601" identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" and "sim-id" which contains a SIM card provisioned by the given operator.
    
+
    
+            Format: string
    
+
    username
    		
+
    
+            Alias: user
    
+
    The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    infiniband setting
    
+
    Infiniband Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+
    
+            Format: byte array
    
+
    mtu
    		
+
    
+            Alias: mtu
    
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
+
    
+            Format: uint32
    
+
    p-key
    		
+
    
+            Alias: p-key
    
+
    The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka "the P_Key at index 0").  Otherwise it is a 16-bit unsigned integer, whose high bit is set if it is a "full membership" P_Key.
    
+
    
+            Format: int32
    
+
    parent
    		
+
    
+            Alias: parent
    
+
    The interface name of the parent device of this device. Normally NULL, but if the "p_key" property is set, then you must specify the base device by setting either this property or "mac-address".
    
+
    
+            Format: string
    
+
    transport-mode
    		
+
    
+            Alias: transport-mode
    
+
    The IP-over-InfiniBand transport mode. Either "datagram" or "connected".
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ipv4 setting
    
+
    IPv4 Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    addresses
    		
+
    
+            Alias: ip4
    
+
    Array of IP addresses.
    
+
    
+            Format: array of array of uint32
    
+
    dad-timeout
    		
+
    Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.
    
+
    
+            Format: int32
    
+
    dhcp-client-id
    		
+
    A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.
    
+
    
+            Format: string
    
+
    dhcp-fqdn
    		
+
    If the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.
    
+
    
+            Format: string
    
+
    dhcp-hostname
    		
+
    If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
+
    
+            Format: string
    
+
    dhcp-hostname-flags
    		
+
    Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
+
    
+            Format: uint32
    
+
    dhcp-iaid
    		
+
    A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
+
    
+            Format: string
    
+
    dhcp-send-hostname
    		
+
    If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
+
    
+            Format: boolean
    
+
    dhcp-timeout
    		
+
    A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
+
    
+            Format: int32
    
+
    dns
    		
+
    Array of IP addresses of DNS servers.
    
+
    
+            Format: array of uint32
    
+
    dns-options
    		
+
    Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
+
    
+            Format: array of string
    
+
    dns-priority
    		
+
    DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
+
    
+            Format: int32
    
+
    dns-search
    		
+
    Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
+
    
+            Format: array of string
    
+
    gateway
    		
+
    
+            Alias: gw4
    
+
    The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
+
    
+            Format: string
    
+
    ignore-auto-dns
    		
+
    When "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
+
    
+            Format: boolean
    
+
    ignore-auto-routes
    		
+
    When "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
+
    
+            Format: boolean
    
+
    may-fail
    		
+
    If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
+
    
+            Format: boolean
    
+
    method
    		
+
    IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
+
    
+            Format: string
    
+
    never-default
    		
+
    If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
+
    
+            Format: boolean
    
+
    route-metric
    		
+
    The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
+
    
+            Format: int64
    
+
    route-table
    		
+
    Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
+
    
+            Format: uint32
    
+
    routes
    		
+
    Array of IP routes.
    
+
    
+            Format: array of array of uint32
    
+
    routing-rules
    
+
    
+
    
+
    
+
    ipv6 setting
    
+
    IPv6 Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    addr-gen-mode
    		
+
    Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by "ip6-privacy" property and it does not affect the temporary addresses configured with this option.
    
+
    
+            Format: int32
    
+
    addresses
    		
+
    
+            Alias: ip6
    
+
    Array of IP addresses.
    
+
    
+            Format: array of legacy IPv6 address struct
    
+
    dhcp-duid
    		
+
    A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the "${DEVICE}" or "${MAC}" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed.
    
+
    
+            Format: string
    
+
    dhcp-hostname
    		
+
    If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
+
    
+            Format: string
    
+
    dhcp-hostname-flags
    		
+
    Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
+
    
+            Format: uint32
    
+
    dhcp-iaid
    		
+
    A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
+
    
+            Format: string
    
+
    dhcp-send-hostname
    		
+
    If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
+
    
+            Format: boolean
    
+
    dhcp-timeout
    		
+
    A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
+
    
+            Format: int32
    
+
    dns
    		
+
    Array of IP addresses of DNS servers.
    
+
    
+            Format: array of byte array
    
+
    dns-options
    		
+
    Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
+
    
+            Format: array of string
    
+
    dns-priority
    		
+
    DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
+
    
+            Format: int32
    
+
    dns-search
    		
+
    Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
+
    
+            Format: array of string
    
+
    gateway
    		
+
    
+            Alias: gw6
    
+
    The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
+
    
+            Format: string
    
+
    ignore-auto-dns
    		
+
    When "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
+
    
+            Format: boolean
    
+
    ignore-auto-routes
    		
+
    When "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
+
    
+            Format: boolean
    
+
    ip6-privacy
    		
+
    Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to "-1" (unknown) means fallback to global configuration "ipv6.ip6-privacy". If also global configuration is unspecified or set to "-1", fallback to read "/proc/sys/net/ipv6/conf/default/use_tempaddr". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the "addr-gen-mode" property's "stable-privacy" setting as another way of avoiding host tracking with IPv6 addresses.
    
+
    
+            Format: NMSettingIP6ConfigPrivacy (int32)
    
+
    may-fail
    		
+
    If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
+
    
+            Format: boolean
    
+
    method
    		
+
    IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
+
    
+            Format: string
    
+
    never-default
    		
+
    If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
+
    
+            Format: boolean
    
+
    ra-timeout
    		
+
    A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity.
    
+
    
+            Format: int32
    
+
    route-metric
    		
+
    The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
+
    
+            Format: int64
    
+
    route-table
    		
+
    Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
+
    
+            Format: uint32
    
+
    routes
    		
+
    Array of IP routes.
    
+
    
+            Format: array of legacy IPv6 route struct
    
+
    routing-rules
    token
    		
+
    Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ip-tunnel setting
    
+
    IP Tunneling Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    encapsulation-limit
    		
+
    How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels.
    
+
    
+            Format: uint32
    
+
    flags
    		
+
    Tunnel flags. Currently the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels.
    
+
    
+            Format: uint32
    
+
    flow-label
    		
+
    The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels.
    
+
    
+            Format: uint32
    
+
    input-key
    		
+
    The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
+
    
+            Format: string
    
+
    local
    		
+
    
+            Alias: local
    
+
    The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address.
    
+
    
+            Format: string
    
+
    mode
    		
+
    
+            Alias: mode
    
+
    The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2).
    
+
    
+            Format: uint32
    
+
    mtu
    		
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments.
    
+
    
+            Format: uint32
    
+
    output-key
    		
+
    The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
+
    
+            Format: string
    
+
    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface.
    
+
    
+            Format: string
    
+
    path-mtu-discovery
    		
+
    Whether to enable Path MTU Discovery on this tunnel.
    
+
    
+            Format: boolean
    
+
    remote
    		
+
    
+            Alias: remote
    
+
    The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address.
    
+
    
+            Format: string
    
+
    tos
    		
+
    The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets.
    
+
    
+            Format: uint32
    
+
    ttl
    		
+
    The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    macsec setting
    
+
    MACSec Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    encrypt
    		
+
    
+            Alias: encrypt
    
+
    Whether the transmitted traffic must be encrypted.
    
+
    
+            Format: boolean
    
+
    mka-cak
    		
+
    
+            Alias: cak
    
+
    The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement.
    
+
    
+            Format: string
    
+
    mka-cak-flags
    		
+
    Flags indicating how to handle the "mka-cak" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    mka-ckn
    		
+
    
+            Alias: ckn
    
+
    The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement.
    
+
    
+            Format: string
    
+
    mode
    		
+
    
+            Alias: mode
    
+
    Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained.
    
+
    
+            Format: int32
    
+
    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+
    
+            Format: string
    
+
    port
    		
+
    
+            Alias: port
    
+
    The port component of the SCI (Secure Channel Identifier), between 1 and 65534.
    
+
    
+            Format: int32
    
+
    send-sci
    		
+
    Specifies whether the SCI (Secure Channel Identifier) is included in every packet.
    
+
    
+            Format: boolean
    
+
    validation
    		
+
    Specifies the validation mode for incoming frames.
    
+
    
+            Format: int32
    
+
    
+
    
+
    
+
    
+
    macvlan setting
    
+
    MAC VLAN Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    mode
    		
+
    
+            Alias: mode
    
+
    The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device.
    
+
    
+            Format: uint32
    
+
    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+
    
+            Format: string
    
+
    promiscuous
    		
+
    Whether the interface should be put in promiscuous mode.
    
+
    
+            Format: boolean
    
+
    tap
    		
+
    
+            Alias: tap
    
+
    Whether the interface should be a MACVTAP.
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    match setting
    
+
    Match settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    driver
    		
+
    A list of driver names to match. Each element is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate driver name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+
    
+            Format: array of string
    
+
    interface-name
    		
+
    A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+
    
+            Format: array of string
    
+
    kernel-command-line
    		
+
    A list of kernel command line arguments to match. This may be used to check whether a specific kernel command line option is set (or if prefixed with the exclamation mark unset). The argument must either be a single word, or an assignment (i.e. two words, separated "="). In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is looked for with right and left hand side matching.
    
+
    
+            Format: array of string
    
+
    path
    		
+
    A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form "pci-$domain:$bus:$device.$function", where each variable is an hexadecimal value; for example "pci-0000:0a:00.0". The path of a device can be obtained with "udevadm info /sys/class/net/$dev | grep ID_PATH=" or by looking at the "path" property exported by NetworkManager ("nmcli -f general.path device show $dev"). Each element of the list is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate path is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
+
    
+            Format: array of string
    
+
    
+
    
+
    
+
    
+
    802-11-olpc-mesh setting
    
+
    
+          Alias: olpc-mesh
    
+
    OLPC Wireless Mesh Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    channel
    		
+
    
+            Alias: channel
    
+
    Channel on which the mesh network to join is located.
    
+
    
+            Format: uint32
    
+
    dhcp-anycast-address
    		
+
    
+            Alias: dhcp-anycast
    
+
    Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request.
    
+
    
+            Format: byte array
    
+
    ssid
    		
+
    
+            Alias: ssid
    
+
    SSID of the mesh network to join.
    
+
    
+            Format: byte array
    
+
    
+
    
+
    
+
    
+
    ovs-bridge setting
    
+
    OvsBridge Link Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    datapath-type
    		
+
    The data path type. One of "system", "netdev" or empty.
    
+
    
+            Format: string
    
+
    fail-mode
    		
+
    The bridge failure mode. One of "secure", "standalone" or empty.
    
+
    
+            Format: string
    
+
    mcast-snooping-enable
    		
+
    Enable or disable multicast snooping.
    
+
    
+            Format: boolean
    
+
    rstp-enable
    		
+
    Enable or disable RSTP.
    
+
    
+            Format: boolean
    
+
    stp-enable
    		
+
    Enable or disable STP.
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    ovs-dpdk setting
    
+
    OvsDpdk Link Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    devargs
    		
+
    Open vSwitch DPDK device arguments.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ovs-interface setting
    
+
    Open vSwitch Interface Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    type
    		
+
    The interface type. Either "internal", "system", "patch", "dpdk", or empty.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ovs-patch setting
    
+
    OvsPatch Link Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    peer
    		
+
    Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ovs-port setting
    
+
    OvsPort Link Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    bond-downdelay
    		
+
    The time port must be inactive in order to be considered down.
    
+
    
+            Format: uint32
    
+
    bond-mode
    		
+
    Bonding mode. One of "active-backup", "balance-slb", or "balance-tcp".
    
+
    
+            Format: string
    
+
    bond-updelay
    		
+
    The time port must be active before it starts forwarding traffic.
    
+
    
+            Format: uint32
    
+
    lacp
    		
+
    LACP mode. One of "active", "off", or "passive".
    
+
    
+            Format: string
    
+
    tag
    		
+
    The VLAN tag in the range 0-4095.
    
+
    
+            Format: uint32
    
+
    vlan-mode
    		
+
    The VLAN mode. One of "access", "native-tagged", "native-untagged", "trunk" or unset.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    ppp setting
    
+
    Point-to-Point Protocol Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    baud
    		
+
    If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed.
    
+
    
+            Format: uint32
    
+
    crtscts
    		
+
    If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals.  This value should normally be set to FALSE.
    
+
    
+            Format: boolean
    
+
    lcp-echo-failure
    		
+
    If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer.  The "lcp-echo-interval" property must also be set to a non-zero value if this property is used.
    
+
    
+            Format: uint32
    
+
    lcp-echo-interval
    		
+
    If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value).  Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this.
    
+
    
+            Format: uint32
    
+
    mppe-stateful
    		
+
    If TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE.
    
+
    
+            Format: boolean
    
+
    mru
    		
+
    If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384.
    
+
    
+            Format: uint32
    
+
    mtu
    		
+
    If non-zero, instruct pppd to send packets no larger than the specified size.
    
+
    
+            Format: uint32
    
+
    no-vj-comp
    		
+
    If TRUE, Van Jacobsen TCP header compression will not be requested.
    
+
    
+            Format: boolean
    
+
    noauth
    		
+
    If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE.
    
+
    
+            Format: boolean
    
+
    nobsdcomp
    		
+
    If TRUE, BSD compression will not be requested.
    
+
    
+            Format: boolean
    
+
    nodeflate
    		
+
    If TRUE, "deflate" compression will not be requested.
    
+
    
+            Format: boolean
    
+
    refuse-chap
    		
+
    If TRUE, the CHAP authentication method will not be used.
    
+
    
+            Format: boolean
    
+
    refuse-eap
    		
+
    If TRUE, the EAP authentication method will not be used.
    
+
    
+            Format: boolean
    
+
    refuse-mschap
    		
+
    If TRUE, the MSCHAP authentication method will not be used.
    
+
    
+            Format: boolean
    
+
    refuse-mschapv2
    		
+
    If TRUE, the MSCHAPv2 authentication method will not be used.
    
+
    
+            Format: boolean
    
+
    refuse-pap
    		
+
    If TRUE, the PAP authentication method will not be used.
    
+
    
+            Format: boolean
    
+
    require-mppe
    		
+
    If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections.
    
+
    
+            Format: boolean
    
+
    require-mppe-128
    		
+
    If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the "require-mppe" property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail.
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    pppoe setting
    
+
    PPP-over-Ethernet Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    parent
    		
+
    
+            Alias: parent
    
+
    If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in "interface-name" of NMSettingConnection.
    
+
    
+            Format: string
    
+
    password
    		
+
    
+            Alias: password
    
+
    Password used to authenticate with the PPPoE service.
    
+
    
+            Format: string
    
+
    password-flags
    		
+
    Flags indicating how to handle the "password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    service
    		
+
    
+            Alias: service
    
+
    If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required.
    
+
    
+            Format: string
    
+
    username
    		
+
    
+            Alias: username
    
+
    Username used to authenticate with the PPPoE service.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    proxy setting
    
+
    WWW Proxy Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    browser-only
    		
+
    
+            Alias: browser-only
    
+
    Whether the proxy configuration is for browser only.
    
+
    
+            Format: boolean
    
+
    method
    		
+
    
+            Alias: method
    
+
    Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)
    
+
    
+            Format: int32
    
+
    pac-script
    		
+
    
+            Alias: pac-script
    
+
    PAC script for the connection.
    
+
    
+            Format: string
    
+
    pac-url
    		
+
    
+            Alias: pac-url
    
+
    PAC URL for obtaining PAC file.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    serial setting
    
+
    Serial Link Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    baud
    		
+
    Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed.
    
+
    
+            Format: uint32
    
+
    bits
    		
+
    Byte-width of the serial communication. The 8 in "8n1" for example.
    
+
    
+            Format: uint32
    
+
    parity
    		
+
    Parity setting of the serial port.
    
+
    
+            Format: NMSettingSerialParity (byte)
    
+
    send-delay
    		
+
    Time to delay between each byte sent to the modem, in microseconds.
    
+
    
+            Format: uint64
    
+
    stopbits
    		
+
    Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in "8n1" for example.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    sriov setting
    
+
    SR-IOV settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    autoprobe-drivers
    		
+
    Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1).
    
+
    
+            Format: NMTernary (int32)
    
+
    total-vfs
    		
+
    The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection.
    
+
    
+            Format: uint32
    
+
    vfs
    		
+
    Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.
    
+
    
+            Format: array of vardict
    
+
    
+
    
+
    
+
    
+
    tc setting
    
+
    Linux Traffic Control Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
    



    qdiscs
    		
+
    Array of TC queueing disciplines.
    
+
    
+            Format: array of vardict
    
+
    tfilters
    		
+
    Array of TC traffic filters.
    
+
    
+            Format: array of vardict
    
+
    
+
    
+
    
+
    
+
    team setting
    
+
    Teaming Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    config
    		
+
    
+            Alias: config
    
+
    The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details.
    
+
    
+            Format: string
    
+
    link-watchers
    		
+
    Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
+
    
+            Format: array of vardict
    
+
    mcast-rejoin-count
    		
+
    Corresponds to the teamd mcast_rejoin.count.
    
+
    
+            Format: int32
    
+
    mcast-rejoin-interval
    		
+
    Corresponds to the teamd mcast_rejoin.interval.
    
+
    
+            Format: int32
    
+
    notify-peers-count
    		
+
    Corresponds to the teamd notify_peers.count.
    
+
    
+            Format: int32
    
+
    notify-peers-interval
    		
+
    Corresponds to the teamd notify_peers.interval.
    
+
    
+            Format: int32
    
+
    runner
    		
+
    Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random".
    
+
    
+            Format: string
    
+
    runner-active
    		
+
    Corresponds to the teamd runner.active.
    
+
    
+            Format: boolean
    
+
    runner-agg-select-policy
    		
+
    Corresponds to the teamd runner.agg_select_policy.
    
+
    
+            Format: string
    
+
    runner-fast-rate
    		
+
    Corresponds to the teamd runner.fast_rate.
    
+
    
+            Format: boolean
    
+
    runner-hwaddr-policy
    		
+
    Corresponds to the teamd runner.hwaddr_policy.
    
+
    
+            Format: string
    
+
    runner-min-ports
    		
+
    Corresponds to the teamd runner.min_ports.
    
+
    
+            Format: int32
    
+
    runner-sys-prio
    		
+
    Corresponds to the teamd runner.sys_prio.
    
+
    
+            Format: int32
    
+
    runner-tx-balancer
    		
+
    Corresponds to the teamd runner.tx_balancer.name.
    
+
    
+            Format: string
    
+
    runner-tx-balancer-interval
    		
+
    Corresponds to the teamd runner.tx_balancer.interval.
    
+
    
+            Format: int32
    
+
    runner-tx-hash
    		
+
    Corresponds to the teamd runner.tx_hash.
    
+
    
+            Format: array of string
    
+
    
+
    
+
    
+
    
+
    team-port setting
    
+
    Team Port Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    config
    		
+
    
+            Alias: config
    
+
    The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details.
    
+
    
+            Format: string
    
+
    lacp-key
    		
+
    Corresponds to the teamd ports.PORTIFNAME.lacp_key.
    
+
    
+            Format: int32
    
+
    lacp-prio
    		
+
    Corresponds to the teamd ports.PORTIFNAME.lacp_prio.
    
+
    
+            Format: int32
    
+
    link-watchers
    		
+
    Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
+
    
+            Format: array of vardict
    
+
    prio
    		
+
    Corresponds to the teamd ports.PORTIFNAME.prio.
    
+
    
+            Format: int32
    
+
    queue-id
    		
+
    Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config.
    
+
    
+            Format: int32
    
+
    sticky
    		
+
    Corresponds to the teamd ports.PORTIFNAME.sticky.
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    tun setting
    
+
    Tunnel Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    group
    		
+
    
+            Alias: group
    
+
    The group ID which will own the device. If set to NULL everyone will be able to use the device.
    
+
    
+            Format: string
    
+
    mode
    		
+
    
+            Alias: mode
    
+
    The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one.
    
+
    
+            Format: uint32
    
+
    multi-queue
    		
+
    
+            Alias: multi-queue
    
+
    If the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue.
    
+
    
+            Format: boolean
    
+
    owner
    		
+
    
+            Alias: owner
    
+
    The user ID which will own the device. If set to NULL everyone will be able to use the device.
    
+
    
+            Format: string
    
+
    pi
    		
+
    
+            Alias: pi
    
+
    If TRUE the interface will prepend a 4 byte header describing the physical interface to the packets.
    
+
    
+            Format: boolean
    
+
    vnet-hdr
    		
+
    
+            Alias: vnet-hdr
    
+
    If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header.
    
+
    
+            Format: boolean
    
+
    
+
    
+
    
+
    
+
    vlan setting
    
+
    VLAN Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    egress-priority-map
    		
+
    
+            Alias: egress
    
+
    For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
+
    
+            Format: array of string
    
+
    flags
    		
+
    
+            Alias: flags
    
+
    One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.
    
+
    
+            Format: NMVlanFlags (uint32)
    
+
    id
    		
+
    
+            Alias: id
    
+
    The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.
    
+
    
+            Format: uint32
    
+
    ingress-priority-map
    		
+
    
+            Alias: ingress
    
+
    For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
+
    
+            Format: array of string
    
+
    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    vpn setting
    
+
    VPN Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    data
    		
+
    Dictionary of key/value pairs of VPN plugin specific data.  Both keys and values must be strings.
    
+
    
+            Format: dict of string to string
    
+
    persistent
    		
+
    If the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected.
    
+
    
+            Format: boolean
    
+
    secrets
    		
+
    Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys.  Both keys and values must be strings.
    
+
    
+            Format: dict of string to string
    
+
    service-type
    		
+
    
+            Alias: vpn-type
    
+
    D-Bus service name of the VPN plugin that this setting uses to connect to its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin.
    
+
    
+            Format: string
    
+
    timeout
    		
+
    Timeout for the VPN service to establish the connection. Some services may take quite a long time to connect. Value of 0 means a default timeout, which is 60 seconds (unless overridden by vpn.timeout in configuration file). Values greater than zero mean timeout in seconds.
    
+
    
+            Format: uint32
    
+
    user-name
    		
+
    
+            Alias: user
    
+
    If the VPN connection requires a user name for authentication, that name should be provided here.  If the connection is available to more than one user, and the VPN requires each user to supply a different name, then leave this property empty.  If this property is empty, NetworkManager will automatically supply the username of the user which requested the VPN connection.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    vrf setting
    
+
    VRF settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
    



    table
    		
+
    
+            Alias: table
    
+
    The routing table for this VRF.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    vxlan setting
    
+
    VXLAN Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    ageing
    		
+
    Specifies the lifetime in seconds of FDB entries learnt by the kernel.
    
+
    
+            Format: uint32
    
+
    destination-port
    		
+
    
+            Alias: destination-port
    
+
    Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
    
+
    
+            Format: uint32
    
+
    id
    		
+
    
+            Alias: id
    
+
    Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use.
    
+
    
+            Format: uint32
    
+
    l2-miss
    		
+
    Specifies whether netlink LL ADDR miss notifications are generated.
    
+
    
+            Format: boolean
    
+
    l3-miss
    		
+
    Specifies whether netlink IP ADDR miss notifications are generated.
    
+
    
+            Format: boolean
    
+
    learning
    		
+
    Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.
    
+
    
+            Format: boolean
    
+
    limit
    		
+
    Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.
    
+
    
+            Format: uint32
    
+
    local
    		
+
    
+            Alias: local
    
+
    If given, specifies the source IP address to use in outgoing packets.
    
+
    
+            Format: string
    
+
    parent
    		
+
    
+            Alias: dev
    
+
    If given, specifies the parent interface name or parent connection UUID.
    
+
    
+            Format: string
    
+
    proxy
    		
+
    Specifies whether ARP proxy is turned on.
    
+
    
+            Format: boolean
    
+
    remote
    		
+
    
+            Alias: remote
    
+
    Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.
    
+
    
+            Format: string
    
+
    rsc
    		
+
    Specifies whether route short circuit is turned on.
    
+
    
+            Format: boolean
    
+
    source-port-max
    		
+
    
+            Alias: source-port-max
    
+
    Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
+
    
+            Format: uint32
    
+
    source-port-min
    		
+
    
+            Alias: source-port-min
    
+
    Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
+
    
+            Format: uint32
    
+
    tos
    		
+
    Specifies the TOS value to use in outgoing packets.
    
+
    
+            Format: uint32
    
+
    ttl
    		
+
    Specifies the time-to-live value to use in outgoing packets.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    wifi-p2p setting
    
+
    Wi-Fi P2P Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    peer
    		
+
    
+            Alias: peer
    
+
    The P2P device that should be connected to. Currently this is the only way to create or join a group.
    
+
    
+            Format: string
    
+
    wfd-ies
    		
+
    The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.
    
+
    
+            Format: byte array
    
+
    wps-method
    		
+
    Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    wimax setting
    
+
    WiMax Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
    



    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1
    
+
    
+            Format: byte array
    
+
    network-name
    		
+
    
+            Alias: nsp
    
+
    Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    802-3-ethernet setting
    
+
    
+          Alias: ethernet
    
+
    Wired Ethernet Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    auto-negotiate
    		
+
    When TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.
    
+
    
+            Format: boolean
    
+
    cloned-mac-address
    		
+
    
+            Alias: cloned-mac
    
+
    If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values "preserve", "permanent", "random" and "stable" are supported. "preserve" means not to touch the MAC address on activation. "permanent" means to use the permanent hardware address if the device has one (otherwise this is treated as "preserve"). "random" creates a random MAC address on each connect. "stable" creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to "preserve" (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as "assigned-mac-address" or the deprecated "cloned-mac-address".
    
+
    
+            Format: byte array
    
+
    duplex
    		
+
    When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.
    
+
    
+            Format: string
    
+
    generate-mac-address-mask
    		
+
    With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
+
    
+            Format: string
    
+
    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+
    
+            Format: byte array
    
+
    mac-address-blacklist
    		
+
    If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
    
+
    
+            Format: array of string
    
+
    mtu
    		
+
    
+            Alias: mtu
    
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
+
    
+            Format: uint32
    
+
    port
    		
+
    Specific port type to use if the device supports multiple attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored.
    
+
    
+            Format: string
    
+
    s390-nettype
    		
+
    s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems.
    
+
    
+            Format: string
    
+
    s390-options
    		
+
    Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include "portno", "layer2", "portname", "protocol", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
+
    
+            Format: dict of string to string
    
+
    s390-subchannels
    		
+
    Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
    
+
    
+            Format: array of string
    
+
    speed
    		
+
    When a value greater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.
    
+
    
+            Format: uint32
    
+
    wake-on-lan
    		
+
    The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
+
    
+            Format: uint32
    
+
    wake-on-lan-password
    		
+
    If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.
    
+
    
+            Format: string
    
+
    
+
    
+
    
+
    
+
    wireguard setting
    
+
    WireGuard Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    fwmark
    		
+
    The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that "ip4-auto-default-route" or "ip6-auto-default-route" enabled, implies to automatically choose a fwmark.
    
+
    
+            Format: uint32
    
+
    ip4-auto-default-route
    		
+
    Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route from wireguard.peer-routes will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, an unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto and what WireGuard calls "Improved Rule-based Routing". Note that for this automatism to work, you usually don't want to set ipv4.gateway, because that will result in a conflicting default route. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips.
    
+
    
+            Format: NMTernary (int32)
    
+
    ip6-auto-default-route
    		
+
    Like ip4-auto-default-route, but for the IPv6 default route.
    
+
    
+            Format: NMTernary (int32)
    
+
    listen-port
    		
+
    The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.
    
+
    
+            Format: uint32
    
+
    mtu
    		
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.
    
+
    
+            Format: uint32
    
+
    peer-routes
    		
+
    Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. Usually you want this automatism enabled. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively. Note that if the peer's AllowedIPs is "0.0.0.0/0" or "::/0" and the profile's ipv4.never-default or ipv6.never-default setting is enabled, the peer route for this peer won't be added automatically.
    
+
    
+            Format: boolean
    
+
    private-key
    		
+
    The 256 bit private-key in base64 encoding.
    
+
    
+            Format: string
    
+
    private-key-flags
    		
+
    Flags indicating how to handle the "private-key" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    
+
    
+
    
+
    
+
    802-11-wireless setting
    
+
    
+          Alias: wifi
    
+
    Wi-Fi Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    band
    		
+
    802.11 frequency band of the network.  One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.
    
+
    
+            Format: string
    
+
    bssid
    		
+
    If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.
    
+
    
+            Format: byte array
    
+
    channel
    		
+
    Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the "band" property to be set.
    
+
    
+            Format: uint32
    
+
    cloned-mac-address
    		
+
    
+            Alias: cloned-mac
    
+
    If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values "preserve", "permanent", "random" and "stable" are supported. "preserve" means not to touch the MAC address on activation. "permanent" means to use the permanent hardware address of the device. "random" creates a random MAC address on each connect. "stable" creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to "preserve" (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as "assigned-mac-address" or the deprecated "cloned-mac-address".
    
+
    
+            Format: byte array
    
+
    generate-mac-address-mask
    		
+
    With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
+
    
+            Format: string
    
+
    hidden
    		
+
    If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air.
    
+
    
+            Format: boolean
    
+
    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
+
    
+            Format: byte array
    
+
    mac-address-blacklist
    		
+
    A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55").
    
+
    
+            Format: array of string
    
+
    mac-address-randomization
    		
+
    One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1
    
+
    
+            Format: uint32
    
+
    mode
    		
+
    
+            Alias: mode
    
+
    Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap".  If blank, infrastructure is assumed.
    
+
    
+            Format: string
    
+
    mtu
    		
+
    
+            Alias: mtu
    
+
    If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
+
    
+            Format: uint32
    
+
    powersave
    		
+
    One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.
    
+
    
+            Format: uint32
    
+
    rate
    		
+
    If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate.
    
+
    
+            Format: uint32
    
+
    seen-bssids
    		
+
    A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.
    
+
    
+            Format: array of string
    
+
    ssid
    		
+
    
+            Alias: ssid
    
+
    SSID of the Wi-Fi network. Must be specified.
    
+
    
+            Format: byte array
    
+
    tx-power
    		
+
    If non-zero, directs the device to use the specified transmit power. Units are dBm.  This property is highly driver dependent and not all devices support setting a static transmit power.
    
+
    
+            Format: uint32
    
+
    wake-on-wlan
    		
+
    The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    802-11-wireless-security setting
    
+
    
+          Alias: wifi-sec
    
+
    Wi-Fi Security Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    auth-alg
    		
+
    When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here.  One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.
    
+
    
+            Format: string
    
+
    fils
    		
+
    Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.
    
+
    
+            Format: int32
    
+
    group
    		
+
    A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
    
+
    
+            Format: array of string
    
+
    key-mgmt
    		
+
    Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security.
    
+
    
+            Format: string
    
+
    leap-password
    		
+
    The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
+
    
+            Format: string
    
+
    leap-password-flags
    		
+
    Flags indicating how to handle the "leap-password" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    leap-username
    		
+
    The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
+
    
+            Format: string
    
+
    pairwise
    		
+
    A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".
    
+
    
+            Format: array of string
    
+
    pmf
    		
+
    Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.
    
+
    
+            Format: int32
    
+
    proto
    		
+
    List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.
    
+
    
+            Format: array of string
    
+
    psk
    		
+
    Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
    
+
    
+            Format: string
    
+
    psk-flags
    		
+
    Flags indicating how to handle the "psk" property.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    wep-key-flags
    		
+
    Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties.
+           See the section called “Secret flag types:” for flag values.
+          
    
+
    
+            Format: NMSettingSecretFlags (uint32)
    
+
    wep-key-type
    		
+
    Controls the interpretation of WEP keys.  Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.
    
+
    
+            Format: NMWepKeyType (uint32)
    
+
    wep-key0
    		
+
    Index 0 WEP key.  This is the WEP key used in most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+
    
+            Format: string
    
+
    wep-key1
    		
+
    Index 1 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+
    
+            Format: string
    
+
    wep-key2
    		
+
    Index 2 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+
    
+            Format: string
    
+
    wep-key3
    		
+
    Index 3 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
+
    
+            Format: string
    
+
    wep-tx-keyidx
    		
+
    When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here.  Valid values are 0 (default key) through 3.  Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
    
+
    
+            Format: uint32
    
+
    wps-method
    		
+
    Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    wpan setting
    
+
    IEEE 802.15.4 (WPAN) MAC Settings.
    
+
    
+        Properties:
+        
    
+
    
++++
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    



    channel
    		
+
    
+            Alias: channel
    
+
    IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
+
    
+            Format: int32
    
+
    mac-address
    		
+
    
+            Alias: mac
    
+
    If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches.
    
+
    
+            Format: string
    
+
    page
    		
+
    
+            Alias: page
    
+
    IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
+
    
+            Format: int32
    
+
    pan-id
    		
+
    
+            Alias: pan-id
    
+
    IEEE 802.15.4 Personal Area Network (PAN) identifier.
    
+
    
+            Format: uint32
    
+
    short-address
    		
+
    
+            Alias: short-addr
    
+
    Short IEEE 802.15.4 address to be used within a restricted environment.
    
+
    
+            Format: uint32
    
+
    
+
    
+
    
+
    
+
    Secret flag types:
    
+
    
+            Each password or secret property in a setting has an associated flags property
+            that describes how to handle that secret. The flags property is a bitfield
+            that contains zero or more of the following values logically OR-ed together.
+          
    
+
      
+
    • 0x0 (none) - the system is responsible for providing and storing this secret. This
+              may be required so that secrets are already available before the user logs in.
+              It also commonly means that the secret will be stored in plain text on disk, accessible
+              to root only. For example via the keyfile settings plugin as described in the "PLUGINS" section
+              in NetworkManager.conf(5).
+              
      • 
+
    • 0x1 (agent-owned) - a user-session secret agent is responsible for providing and storing
+              this secret; when it is required, agents will be asked to provide it.
      • 
+
    • 0x2 (not-saved) - this secret should not be saved but should be requested from the user
+              each time it is required. This flag should be used for One-Time-Pad secrets, PIN codes from hardware tokens,
+              or if the user simply does not want to save the secret.
      • 
+
    • 0x4 (not-required) - in some situations it cannot be automatically determined that a secret
+              is required or not. This flag hints that the secret is not required and should not be requested from the user.
      • 
+
    
+
    
+
    
+
    
+
    Files
    
+
    /etc/NetworkManager/system-connections or distro plugin-specific location
    
+
    
+
    
+
    See Also
    
+
    nmcli(1),
+        nmcli-examples(7),
+        NetworkManager(8),
+        nm-settings-dbus(5),
+        nm-settings-keyfile(5),
+        NetworkManager.conf(5)
    
+
    
+
    
+
    
+
    Generated by GTK-Doc V1.32
    
+
+
\ No newline at end of file
diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html
deleted file mode 100644
index 1e58825e..00000000
--- a/docs/api/html/nm-settings.html
+++ /dev/null
@@ -1,3996 +0,0 @@
-
-
-
-
-nm-settings: NetworkManager Reference Manual
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    
-
    
-
    
-
-
-
    
-
    nm-settings
    
-
    nm-settings — Description of settings and properties of NetworkManager connection profiles
    
-
    
-
    
-
    Description
    
-
    
-          NetworkManager is based on a concept of connection profiles, sometimes referred to as
-          connections only. These connection profiles contain a network configuration. When
-          NetworkManager activates a connection profile on a network device the configuration will
-          be applied and an active network connection will be established. Users are free to create
-          as many connection profiles as they see fit. Thus they are flexible in having various network
-          configurations for different networking needs. The connection profiles are handled by
-          NetworkManager via settings service and are exported on D-Bus
-          (/org/freedesktop/NetworkManager/Settings/<num> objects).
-          The conceptual objects can be described as follows:
-          
    
-
    
----
-
-
-
-
-
    



    Connection (profile)
    
-                  A specific, encapsulated, independent group of settings describing
-                  all the configuration required to connect to a specific network.
-                  It is referred to by a unique identifier called the UUID. A connection
-                  is tied to a one specific device type, but not necessarily a specific
-                  hardware device. It is composed of one or more Settings
-                  objects.
-                
    
-
    
----
-
-
-
-
-
    



    Setting
    
-                  A group of related key/value pairs describing a specific piece of a
-                  Connection (profile). Settings keys and allowed values are
-                  described in the tables below. Keys are also referred to as properties.
-                  Developers can find the setting objects and their properties in the libnm-core
-                  sources. Look for the *_class_init functions near the bottom
-                  of each setting source file.
-                
    
-
    
-
    
-              The settings and properties shown in tables below list all available connection
-              configuration options. However, note that not all settings are applicable to all
-              connection types. NetworkManager provides a command-line tool nmcli
-              that allows direct configuration of the settings and properties according to a connection
-              profile type. nmcli connection editor has also a built-in
-              describe command that can display description of particular settings
-              and properties of this page.
-            
    
-
----
-
-
    



    
-
    
-
    
-
    connection setting
    
-
    General Connection Profile Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-auth-retriesint32-1The number of retries for the authentication. Zero means to try indefinitely; -1 means to use a global default. If the global default is not set, the authentication retries for 3 times before failing the connection. Currently this only applies to 802-1x authentication.
    
-autoconnectbooleanTRUEWhether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.
    
-autoconnect-priorityint320The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority.
    
-autoconnect-retriesint32-1The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again.
    
-autoconnect-slavesNMSettingConnectionAutoconnectSlaves (int32) Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0.
    
-gateway-ping-timeoutuint320If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping.
    
-idstring A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G".
    
-interface-namestring The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface.
    
-lldpint32-1Whether LLDP is enabled for the connection.
    
-llmnrint32-1Whether Link-Local Multicast Name Resolution (LLMNR) is enabled for the connection. LLMNR is a protocol based on the Domain Name System (DNS) packet format that allows both IPv4 and IPv6 hosts to perform name resolution for hosts on the same local link. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable LLMNR for the interface, "resolve" (1) do not register hostname but allow resolving of LLMNR host names If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "yes"). This feature requires a plugin which supports LLMNR. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
-masterstring Interface name of the master device or UUID of the master connection.
    
-mdnsint32-1Whether mDNS is enabled for the connection. The permitted values are: "yes" (2) register hostname and resolving for the connection, "no" (0) disable mDNS for the interface, "resolve" (1) do not register hostname but allow resolving of mDNS host names and "default" (-1) to allow lookup of a global default in NetworkManager.conf. If unspecified, "default" ultimately depends on the DNS plugin (which for systemd-resolved currently means "no"). This feature requires a plugin which supports mDNS. Otherwise the setting has no effect. One such plugin is dns-systemd-resolved.
    
-meteredNMMetered (int32) Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately.
    
-multi-connectint320Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect.
    
-permissionsarray of string An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8.
    
-read-onlybooleanFALSEFALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified.
    
-secondariesarray of string List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.
    
-slave-typestring Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave.
    
-stable-idstring This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.
    
-timestampuint640The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).
    
-typestring Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc).
    
-uuidstring A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").
    
-wait-device-timeoutint32-1Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.
    
-zonestring The trust level of a the connection.  Free form case-insensitive string (for example "Home", "Work", "Public").  NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately.
    
-
    
-
    
-
    
-
    6lowpan setting
    
-
    6LoWPAN Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-parentstring If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created.
    
-
    
-
    
-
    
-
    802-1x setting
    
-
    IEEE 802.1x Authentication Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-altsubject-matchesarray of string List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
-anonymous-identitystring Anonymous identity string for EAP authentication methods.  Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS.
    
-auth-timeoutint320A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds.
    
-ca-certbyte array Contains the CA certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
-ca-cert-passwordstring The password used to access the CA certificate stored in "ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
-ca-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "ca-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
-ca-pathstring UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
-client-certbyte array Contains the client certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte.
    
-client-cert-passwordstring The password used to access the client certificate stored in "client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
-client-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "client-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
-domain-matchstring Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
-domain-suffix-matchstring Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
-eaparray of string The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast".  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
    
-identitystring Identity string for EAP authentication methods.  Often the user's user or login name.
    
-optionalbooleanFALSEWhether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication.
    
-pac-filestring UTF-8 encoded file path containing PAC for EAP-FAST.
    
-passwordstring UTF-8 encoded password used for EAP authentication methods. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
-password-rawbyte array Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the "password" property and the "password-raw" property are specified, "password" is preferred.
    
-password-raw-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password-raw" property. (see the section called “Secret flag types:” for flag values)
    
-phase1-auth-flagsuint320Specifies authentication flags to use in "phase 1" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details.
    
-phase1-fast-provisioningstring Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the "eap" property. Recognized values are "0" (disabled), "1" (allow unauthenticated provisioning), "2" (allow authenticated provisioning), and "3" (allow both authenticated and unauthenticated provisioning).  See the wpa_supplicant documentation for more details.
    
-phase1-peaplabelstring Forces use of the new PEAP label during key derivation.  Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1.  Set to "1" to force use of the new PEAP label.  See the wpa_supplicant documentation for more details.
    
-phase1-peapverstring Forces which PEAP version is used when PEAP is set as the EAP method in the "eap" property.  When unset, the version reported by the server will be used.  Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version.  To do so, this property may be set to "0" or "1" to force that specific PEAP version.
    
-phase2-altsubject-matchesarray of string List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
    
-phase2-authstring Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
-phase2-autheapstring Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property.  Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
    
-phase2-ca-certbyte array Contains the "phase 2" CA certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory.
    
-phase2-ca-cert-passwordstring The password used to access the "phase2" CA certificate stored in "phase2-ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
-phase2-ca-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-ca-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
-phase2-ca-pathstring UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "phase2-ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored.
    
-phase2-client-certbyte array Contains the "phase 2" client certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended.
    
-phase2-client-cert-passwordstring The password used to access the "phase2" client certificate stored in "phase2-client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login.
    
-phase2-client-cert-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-client-cert-password" property. (see the section called “Secret flag types:” for flag values)
    
-phase2-domain-matchstring Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication. If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list.
    
-phase2-domain-suffix-matchstring Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication.  If a matching dNSName is found, this constraint is met.  If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list.
    
-phase2-private-keybyte array Contains the "phase 2" inner private key when the "phase2-auth" or "phase2-autheap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "phase2-private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "phase2-private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate.
    
-phase2-private-key-passwordstring The password used to decrypt the "phase 2" private key specified in the "phase2-private-key" property when the private key either uses the path scheme, or is a PKCS#12 format key.
    
-phase2-private-key-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "phase2-private-key-password" property. (see the section called “Secret flag types:” for flag values)
    
-phase2-subject-matchstring Substring to be matched against the subject of the certificate presented by the authentication server during the inner "phase 2" authentication. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match.
    
-pinstring PIN used for EAP authentication methods.
    
-pin-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "pin" property. (see the section called “Secret flag types:” for flag values)
    
-private-keybyte array Contains the private key when the "eap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: "private-key" is not a "secret" property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users.  Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data.
    
-private-key-passwordstring The password used to decrypt the private key specified in the "private-key" property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key.
    
-private-key-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key-password" property. (see the section called “Secret flag types:” for flag values)
    
-subject-matchstring Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed.  This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match.
    
-system-ca-certsbooleanFALSEWhen TRUE, overrides the "ca-path" and "phase2-ca-path" properties using the system CA directory specified at configure time with the --system-ca-path switch.  The certificates in this directory are added to the verification chain in addition to any certificates specified by the "ca-cert" and "phase2-ca-cert" properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides "ca-cert" and "phase2-ca-cert" properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant).
    
-
    
-
    
-
    
-
    adsl setting
    
-
    ADSL Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-encapsulationstring Encapsulation of ADSL connection.  Can be "vcmux" or "llc".
    
-passwordstring Password used to authenticate with the ADSL service.
    
-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
-protocolstring ADSL connection protocol.  Can be "pppoa", "pppoe" or "ipoatm".
    
-usernamestring Username used to authenticate with the ADSL service.
    
-vciuint320VCI of ADSL connection
    
-vpiuint320VPI of ADSL connection
    
-
    
-
    
-
    
-
    bluetooth setting
    
-
    Bluetooth Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-bdaddrbyte array The Bluetooth address of the device.
    
-typestring Either "dun" for Dial-Up Networking connections or "panu" for Personal Area Networking connections to devices supporting the NAP profile.
    
-
    
-
    
-
    
-
    bond setting
    
-
    Bonding Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the bond's interface name.
    
-optionsdict of string to string{'mode': 'balance-rr'}Dictionary of key/value pairs of bonding options.  Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
-
    
-
    
-
    
-
    bridge setting
    
-
    Bridging Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-ageing-timeuint32300The Ethernet MAC address aging time, in seconds.
    
-forward-delayuint3215The Spanning Tree Protocol (STP) forwarding delay, in seconds.
    
-group-addressbyte array If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00.
    
-group-forward-maskuint320A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP.
    
-hello-timeuint322The Spanning Tree Protocol (STP) hello time, in seconds.
    
-interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the bridge's interface name.
    
-mac-addressbyte array If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the "ethernet.cloned-mac-address" is referred instead to generate the initial MAC address. Note that setting "ethernet.cloned-mac-address" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1
    
-max-ageuint3220The Spanning Tree Protocol (STP) maximum message age, in seconds.
    
-multicast-querierbooleanFALSEEnable or disable sending of multicast queries by the bridge. If not specified the option is disabled.
    
-multicast-query-use-ifaddrbooleanFALSEIf enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used.
    
-multicast-routerstring Sets bridge's multicast router. multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled'. If not specified the default value is 'auto'.
    
-multicast-snoopingbooleanTRUEControls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved.
    
-priorityuint3232768Sets the Spanning Tree Protocol (STP) priority for this bridge.  Lower values are "better"; the lowest priority bridge will be elected the root bridge.
    
-stpbooleanTRUEControls whether Spanning Tree Protocol (STP) is enabled for this bridge.
    
-vlan-default-pviduint321The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames.
    
-vlan-filteringbooleanFALSEControl whether VLAN filtering is enabled on the bridge.
    
-vlan-protocolstring If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'.
    
-vlan-stats-enabledbooleanFALSEControls whether per-VLAN stats accounting is enabled.
    
-vlansarray of vardict Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
-
    
-
    
-
    
-
    bridge-port setting
    
-
    Bridge Port Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-hairpin-modebooleanFALSEEnables or disables "hairpin mode" for the port, which allows frames to be sent back out through the port the frame was received on.
    
-path-costuint32100The Spanning Tree Protocol (STP) port cost for destinations via this port.
    
-priorityuint3232The Spanning Tree Protocol (STP) priority of this bridge port.
    
-vlansarray of vardict Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
    
-
    
-
    
-
    
-
    cdma setting
    
-
    CDMA-based Mobile Broadband Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
-numberstring The number to dial to establish the connection to the CDMA-based mobile broadband network, if any.  If not specified, the default number (#777) is used when required.
    
-passwordstring The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
-usernamestring The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
-
    
-
    
-
    
-
    dcb setting
    
-
    Data Center Bridging Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-app-fcoe-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB FCoE application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
-app-fcoe-modestring"fabric"The FCoE controller mode; either "fabric" (default) or "vn2vn".
    
-app-fcoe-priorityint32-1The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority.  Only used when the "app-fcoe-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
-app-fip-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB FIP application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
-app-fip-priorityint32-1The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority.  Only used when the "app-fip-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
-app-iscsi-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for the DCB iSCSI application.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
-app-iscsi-priorityint32-1The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the "app-iscsi-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag.
    
-priority-bandwidtharray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.
    
-priority-flow-controlarray of uint32 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.
    
-priority-flow-control-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
-priority-group-bandwidtharray of uint32 An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents.
    
-priority-group-flagsNMSettingDcbFlags (uint32) Specifies the NMSettingDcbFlags for DCB Priority Groups.  Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4).
    
-priority-group-idarray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
    
-priority-strict-bandwidtharray of uint32 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.
    
-priority-traffic-classarray of uint32 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.
    
-
    
-
    
-
    
-
    dummy setting
    
-
    Dummy Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-
    
-
    
-
    
-
    ethtool setting
    
-
    Ethtool Ethernet Settings.
    
-
    
------
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-
    
-
    
-
    
-
    generic setting
    
-
    Generic Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-
    
-
    
-
    
-
    gsm setting
    
-
    GSM-based Mobile Broadband Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-apnstring The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network.  The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9.
    
-auto-configbooleanFALSEWhen TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database.
    
-device-idstring The device unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will only apply to the specified device.
    
-home-onlybooleanFALSEWhen TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
-network-idstring The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration.  If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.
    
-numberstring Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1
    
-passwordstring The password used to authenticate with the network, if required.  Many providers do not require a password, or accept any password.  But if a password is required, it is specified here.
    
-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
-pinstring If the SIM is locked with a PIN it must be unlocked before any other operations are requested.  Specify the PIN here to allow operation of the device.
    
-pin-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "pin" property. (see the section called “Secret flag types:” for flag values)
    
-sim-idstring The SIM card unique identifier (as given by the WWAN management service) which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" which contains a SIM card matching the given identifier.
    
-sim-operator-idstring A MCC/MNC string like "310260" or "21601" identifying the specific mobile network operator which this connection applies to.  If given, the connection will apply to any device also allowed by "device-id" and "sim-id" which contains a SIM card provisioned by the given operator.
    
-usernamestring The username used to authenticate with the network, if required.  Many providers do not require a username, or accept any username.  But if a username is required, it is specified here.
    
-
    
-
    
-
    
-
    infiniband setting
    
-
    Infiniband Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-mac-addressbyte array If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.
    
-p-keyint32-1The InfiniBand P_Key to use for this device. A value of -1 means to use the default P_Key (aka "the P_Key at index 0").  Otherwise it is a 16-bit unsigned integer, whose high bit is set if it is a "full membership" P_Key.
    
-parentstring The interface name of the parent device of this device. Normally NULL, but if the "p_key" property is set, then you must specify the base device by setting either this property or "mac-address".
    
-transport-modestring The IP-over-InfiniBand transport mode. Either "datagram" or "connected".
    
-
    
-
    
-
    
-
    ipv4 setting
    
-
    IPv4 Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-address-dataarray of vardict Array of IPv4 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses.
    
-addressesarray of array of uint32 Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet.
    
-dad-timeoutint32-1Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.
    
-dhcp-client-idstring A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.
    
-dhcp-fqdnstring If the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time.
    
-dhcp-hostnamestring If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
-dhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
-dhcp-iaidstring A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
-dhcp-send-hostnamebooleanTRUEIf TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
-dhcp-timeoutint320A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
-dnsarray of uint32 Array of IP addresses of DNS servers (as network-byte-order integers)
    
-dns-optionsarray of string Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
-dns-priorityint320DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
-dns-searcharray of string Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
-gatewaystring The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
-ignore-auto-dnsbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
-ignore-auto-routesbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
-may-failbooleanTRUEIf TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
-methodstring IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
-never-defaultbooleanFALSEIf TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
-route-dataarray of vardict Array of IPv4 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'gateway' entry, containing the gateway IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes.
    
-route-metricint64-1The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
-route-tableuint320Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
-routesarray of array of uint32 Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv4 route structures.  Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)
    
-
    
-
    
-
    
-
    ipv6 setting
    
-
    IPv6 Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-addr-gen-modeint321Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. On D-Bus, the absence of an addr-gen-mode setting equals enabling stable-privacy. For keyfile plugin, the absence of the setting on disk means EUI64 so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by "ip6-privacy" property and it does not affect the temporary addresses configured with this option.
    
-address-dataarray of vardict Array of IPv6 addresses. Each address dictionary contains at least 'address' and 'prefix' entries, containing the IP address as a string, and the prefix length as a uint32. Additional attributes may also exist on some addresses.
    
-addressesarray of legacy IPv6 address struct (a(ayuay)) Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet.
    
-dad-timeoutint32-1Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network.  If an address conflict is detected, the activation will fail.  A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero).  A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.
    
-dhcp-duidstring A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the "${DEVICE}" or "${MAC}" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed.
    
-dhcp-hostnamestring If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time.
    
-dhcp-hostname-flagsuint320Flags for the DHCP hostname and FQDN. Currently this property only includes flags to control the FQDN flags set in the DHCP FQDN option. Supported FQDN flags are NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) and NM_DHCP_HOSTNAME_FLAG_FQDN_NO_UPDATE (0x4).  When no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is set, the DHCP FQDN option will contain no flag. Otherwise, if no FQDN flag is set and NM_DHCP_HOSTNAME_FLAG_FQDN_CLEAR_FLAGS (0x8) is not set, the standard FQDN flags are set in the request: NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1), NM_DHCP_HOSTNAME_FLAG_FQDN_ENCODED (0x2) for IPv4 and NM_DHCP_HOSTNAME_FLAG_FQDN_SERV_UPDATE (0x1) for IPv6. When this property is set to the default value NM_DHCP_HOSTNAME_FLAG_NONE (0x0), a global default is looked up in NetworkManager configuration. If that value is unset or also NM_DHCP_HOSTNAME_FLAG_NONE (0x0), then the standard FQDN flags described above are sent in the DHCP requests.
    
-dhcp-iaidstring A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.
    
-dhcp-send-hostnamebooleanTRUEIf TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer.  If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.
    
-dhcp-timeoutint320A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.
    
-dnsarray of byte array Array of IP addresses of DNS servers (in network byte order)
    
-dns-optionsarray of string Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.
    
-dns-priorityint320DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
    
-dns-searcharray of string Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
    
-gatewaystring The gateway associated with this configuration. This is only meaningful if "addresses" is also set. The gateway's main purpose is to control the next hop of the standard default route on the device. Hence, the gateway property conflicts with "never-default" and will be automatically dropped if the IP configuration is set to never-default. As an alternative to set the gateway, configure a static default route with /0 as prefix length.
    
-ignore-auto-dnsbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured nameservers and search domains are ignored and only nameservers and search domains specified in the "dns" and "dns-search" properties, if any, are used.
    
-ignore-auto-routesbooleanFALSEWhen "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used.
    
-ip6-privacyNMSettingIP6ConfigPrivacy (int32) Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to "-1" (unknown) means fallback to global configuration "ipv6.ip6-privacy". If also global configuration is unspecified or set to "-1", fallback to read "/proc/sys/net/ipv6/conf/default/use_tempaddr". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the "addr-gen-mode" property's "stable-privacy" setting as another way of avoiding host tracking with IPv6 addresses.
    
-may-failbooleanTRUEIf TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.
    
-methodstring IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
    
-never-defaultbooleanFALSEIf TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager.
    
-ra-timeoutint320A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity.
    
-route-dataarray of vardict Array of IPv6 routes. Each route dictionary contains at least 'dest' and 'prefix' entries, containing the destination IP address as a string, and the prefix length as a uint32. Most routes will also have a 'next-hop' entry, containing the next hop IP address as a string. If the route has a 'metric' entry (containing a uint32), that will be used as the metric for the route (otherwise NM will pick a default value appropriate to the device). Additional attributes may also exist on some routes.
    
-route-metricint64-1The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric.
    
-route-tableuint320Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.
    
-routesarray of legacy IPv6 route struct (a(ayuayu)) Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv6 route structures.  Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device.
    
-tokenstring Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode.
    
-
    
-
    
-
    
-
    ip-tunnel setting
    
-
    IP Tunneling Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-encapsulation-limituint320How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels.
    
-flagsuint320Tunnel flags. Currently the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels.
    
-flow-labeluint320The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels.
    
-input-keystring The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
-localstring The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address.
    
-modeuint320The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2).
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments.
    
-output-keystring The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.
    
-parentstring If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface.
    
-path-mtu-discoverybooleanTRUEWhether to enable Path MTU Discovery on this tunnel.
    
-remotestring The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address.
    
-tosuint320The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets.
    
-ttluint320The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value.
    
-
    
-
    
-
    
-
    macsec setting
    
-
    MACSec Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-encryptbooleanTRUEWhether the transmitted traffic must be encrypted.
    
-mka-cakstring The pre-shared CAK (Connectivity Association Key) for MACsec Key Agreement.
    
-mka-cak-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "mka-cak" property. (see the section called “Secret flag types:” for flag values)
    
-mka-cknstring The pre-shared CKN (Connectivity-association Key Name) for MACsec Key Agreement.
    
-modeint320Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained.
    
-parentstring If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
-portint321The port component of the SCI (Secure Channel Identifier), between 1 and 65534.
    
-send-scibooleanTRUESpecifies whether the SCI (Secure Channel Identifier) is included in every packet.
    
-validationint322Specifies the validation mode for incoming frames.
    
-
    
-
    
-
    
-
    macvlan setting
    
-
    MAC VLAN Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-modeuint320The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device.
    
-parentstring If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
-promiscuousbooleanTRUEWhether the interface should be put in promiscuous mode.
    
-tapbooleanFALSEWhether the interface should be a MACVTAP.
    
-
    
-
    
-
    
-
    match setting
    
-
    Match settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-interface-namearray of string A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
-
    
-
    
-
    
-
    802-11-olpc-mesh setting
    
-
    OLPC Wireless Mesh Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-channeluint320Channel on which the mesh network to join is located.
    
-dhcp-anycast-addressbyte array Anycast DHCP MAC address used when requesting an IP address via DHCP. The specific anycast address used determines which DHCP server class answers the request.
    
-ssidbyte array SSID of the mesh network to join.
    
-
    
-
    
-
    
-
    ovs-bridge setting
    
-
    OvsBridge Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-datapath-typestring The data path type. One of "system", "netdev" or empty.
    
-fail-modestring The bridge failure mode. One of "secure", "standalone" or empty.
    
-mcast-snooping-enablebooleanFALSEEnable or disable multicast snooping.
    
-rstp-enablebooleanFALSEEnable or disable RSTP.
    
-stp-enablebooleanFALSEEnable or disable STP.
    
-
    
-
    
-
    
-
    ovs-dpdk setting
    
-
    OvsDpdk Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-devargsstring Open vSwitch DPDK device arguments.
    
-
    
-
    
-
    
-
    ovs-interface setting
    
-
    Open vSwitch Interface Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-typestring The interface type. Either "internal", "system", "patch", "dpdk", or empty.
    
-
    
-
    
-
    
-
    ovs-patch setting
    
-
    OvsPatch Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-peerstring Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to.
    
-
    
-
    
-
    
-
    ovs-port setting
    
-
    OvsPort Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-bond-downdelayuint320The time port must be inactive in order to be considered down.
    
-bond-modestring Bonding mode. One of "active-backup", "balance-slb", or "balance-tcp".
    
-bond-updelayuint320The time port must be active before it starts forwarding traffic.
    
-lacpstring LACP mode. One of "active", "off", or "passive".
    
-taguint320The VLAN tag in the range 0-4095.
    
-vlan-modestring The VLAN mode. One of "access", "native-tagged", "native-untagged", "trunk" or unset.
    
-
    
-
    
-
    
-
    ppp setting
    
-
    Point-to-Point Protocol Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-bauduint320If non-zero, instruct pppd to set the serial port to the specified baudrate.  This value should normally be left as 0 to automatically choose the speed.
    
-crtsctsbooleanFALSEIf TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals.  This value should normally be set to FALSE.
    
-lcp-echo-failureuint320If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer.  The "lcp-echo-interval" property must also be set to a non-zero value if this property is used.
    
-lcp-echo-intervaluint320If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value).  Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this.
    
-mppe-statefulbooleanFALSEIf TRUE, stateful MPPE is used.  See pppd documentation for more information on stateful MPPE.
    
-mruuint320If non-zero, instruct pppd to request that the peer send packets no larger than the specified size.  If non-zero, the MRU should be between 128 and 16384.
    
-mtuuint320If non-zero, instruct pppd to send packets no larger than the specified size.
    
-no-vj-compbooleanFALSEIf TRUE, Van Jacobsen TCP header compression will not be requested.
    
-noauthbooleanTRUEIf TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client.  If FALSE, require authentication from the remote side.  In almost all cases, this should be TRUE.
    
-nobsdcompbooleanFALSEIf TRUE, BSD compression will not be requested.
    
-nodeflatebooleanFALSEIf TRUE, "deflate" compression will not be requested.
    
-refuse-chapbooleanFALSEIf TRUE, the CHAP authentication method will not be used.
    
-refuse-eapbooleanFALSEIf TRUE, the EAP authentication method will not be used.
    
-refuse-mschapbooleanFALSEIf TRUE, the MSCHAP authentication method will not be used.
    
-refuse-mschapv2booleanFALSEIf TRUE, the MSCHAPv2 authentication method will not be used.
    
-refuse-papbooleanFALSEIf TRUE, the PAP authentication method will not be used.
    
-require-mppebooleanFALSEIf TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session.  If either 64-bit or 128-bit MPPE is not available the session will fail.  Note that MPPE is not used on mobile broadband connections.
    
-require-mppe-128booleanFALSEIf TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the "require-mppe" property must also be set to TRUE.  If 128-bit MPPE is not available the session will fail.
    
-
    
-
    
-
    
-
    pppoe setting
    
-
    PPP-over-Ethernet Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-parentstring If given, specifies the parent interface name on which this PPPoE connection should be created.  If this property is not specified, the connection is activated on the interface specified in "interface-name" of NMSettingConnection.
    
-passwordstring Password used to authenticate with the PPPoE service.
    
-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "password" property. (see the section called “Secret flag types:” for flag values)
    
-servicestring If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service.  For most providers, this should be left blank.  It is only required if there are multiple access concentrators or a specific service is known to be required.
    
-usernamestring Username used to authenticate with the PPPoE service.
    
-
    
-
    
-
    
-
    proxy setting
    
-
    WWW Proxy Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-browser-onlybooleanFALSEWhether the proxy configuration is for browser only.
    
-methodint320Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0)
    
-pac-scriptstring PAC script for the connection.
    
-pac-urlstring PAC URL for obtaining PAC file.
    
-
    
-
    
-
    
-
    serial setting
    
-
    Serial Link Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-bauduint3257600Speed to use for communication over the serial port.  Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed.
    
-bitsuint328Byte-width of the serial communication. The 8 in "8n1" for example.
    
-paritybyte The connection parity: 69 (ASCII 'E') for even parity, 111 (ASCII 'o') for odd, 110 (ASCII 'n') for none.
    
-send-delayuint640Time to delay between each byte sent to the modem, in microseconds.
    
-stopbitsuint321Number of stop bits for communication on the serial port.  Either 1 or 2. The 1 in "8n1" for example.
    
-
    
-
    
-
    
-
    sriov setting
    
-
    SR-IOV settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-autoprobe-driversNMTernary (int32) Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1).
    
-total-vfsuint320The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection.
    
-vfsarray of vardict Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.
    
-
    
-
    
-
    
-
    tc setting
    
-
    Linux Traffic Control Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-qdiscsarray of vardict Array of TC queueing disciplines.
    
-tfiltersarray of vardict Array of TC traffic filters.
    
-
    
-
    
-
    
-
    team setting
    
-
    Teaming Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-configstring The JSON configuration for the team network interface.  The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used.  See man teamd.conf for the format details.
    
-interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the team's interface name.
    
-link-watchersarray of vardict Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
-mcast-rejoin-countint32-1Corresponds to the teamd mcast_rejoin.count.
    
-mcast-rejoin-intervalint32-1Corresponds to the teamd mcast_rejoin.interval.
    
-notify-peers-countint32-1Corresponds to the teamd notify_peers.count.
    
-notify-peers-intervalint32-1Corresponds to the teamd notify_peers.interval.
    
-runnerstring Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random".
    
-runner-activebooleanTRUECorresponds to the teamd runner.active.
    
-runner-agg-select-policystring Corresponds to the teamd runner.agg_select_policy.
    
-runner-fast-ratebooleanFALSECorresponds to the teamd runner.fast_rate.
    
-runner-hwaddr-policystring Corresponds to the teamd runner.hwaddr_policy.
    
-runner-min-portsint32-1Corresponds to the teamd runner.min_ports.
    
-runner-sys-prioint32-1Corresponds to the teamd runner.sys_prio.
    
-runner-tx-balancerstring Corresponds to the teamd runner.tx_balancer.name.
    
-runner-tx-balancer-intervalint32-1Corresponds to the teamd runner.tx_balancer.interval.
    
-runner-tx-hasharray of string Corresponds to the teamd runner.tx_hash.
    
-
    
-
    
-
    
-
    team-port setting
    
-
    Team Port Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-configstring The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details.
    
-lacp-keyint32-1Corresponds to the teamd ports.PORTIFNAME.lacp_key.
    
-lacp-prioint32-1Corresponds to the teamd ports.PORTIFNAME.lacp_prio.
    
-link-watchersarray of vardict Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
    
-prioint320Corresponds to the teamd ports.PORTIFNAME.prio.
    
-queue-idint32-1Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config.
    
-stickybooleanFALSECorresponds to the teamd ports.PORTIFNAME.sticky.
    
-
    
-
    
-
    
-
    tun setting
    
-
    Tunnel Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-groupstring The group ID which will own the device. If set to NULL everyone will be able to use the device.
    
-modeuint321The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one.
    
-multi-queuebooleanFALSEIf the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue.
    
-ownerstring The user ID which will own the device. If set to NULL everyone will be able to use the device.
    
-pibooleanFALSEIf TRUE the interface will prepend a 4 byte header describing the physical interface to the packets.
    
-vnet-hdrbooleanFALSEIf TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header.
    
-
    
-
    
-
    
-
    user setting
    
-
    General User Profile Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-datadict of string to string{}A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length.
    
-
    
-
    
-
    
-
    vlan setting
    
-
    VLAN Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-egress-priority-maparray of string For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
-flagsNMVlanFlags (uint32) One or more flags which control the behavior and features of the VLAN interface.  Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0.
    
-iduint320The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.
    
-ingress-priority-maparray of string For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
    
-interface-namestring Deprecated in favor of connection.interface-name, but can be used for backward-compatibility with older daemons, to set the vlan's interface name.
    
-parentstring If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created.  If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property.
    
-
    
-
    
-
    
-
    vpn setting
    
-
    VPN Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-datadict of string to string{}Dictionary of key/value pairs of VPN plugin specific data.  Both keys and values must be strings.
    
-persistentbooleanFALSEIf the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected.
    
-secretsdict of string to string{}Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys.  Both keys and values must be strings.
    
-service-typestring D-Bus service name of the VPN plugin that this setting uses to connect to its network.  i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin.
    
-timeoutuint320Timeout for the VPN service to establish the connection. Some services may take quite a long time to connect. Value of 0 means a default timeout, which is 60 seconds (unless overridden by vpn.timeout in configuration file). Values greater than zero mean timeout in seconds.
    
-user-namestring If the VPN connection requires a user name for authentication, that name should be provided here.  If the connection is available to more than one user, and the VPN requires each user to supply a different name, then leave this property empty.  If this property is empty, NetworkManager will automatically supply the username of the user which requested the VPN connection.
    
-
    
-
    
-
    
-
    vrf setting
    
-
    VRF settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-tableuint320The routing table for this VRF.
    
-
    
-
    
-
    
-
    vxlan setting
    
-
    VXLAN Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-ageinguint32300Specifies the lifetime in seconds of FDB entries learnt by the kernel.
    
-destination-portuint328472Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
    
-iduint320Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use.
    
-l2-missbooleanFALSESpecifies whether netlink LL ADDR miss notifications are generated.
    
-l3-missbooleanFALSESpecifies whether netlink IP ADDR miss notifications are generated.
    
-learningbooleanTRUESpecifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.
    
-limituint320Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.
    
-localstring If given, specifies the source IP address to use in outgoing packets.
    
-parentstring If given, specifies the parent interface name or parent connection UUID.
    
-proxybooleanFALSESpecifies whether ARP proxy is turned on.
    
-remotestring Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.
    
-rscbooleanFALSESpecifies whether route short circuit is turned on.
    
-source-port-maxuint320Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
-source-port-minuint320Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint.
    
-tosuint320Specifies the TOS value to use in outgoing packets.
    
-ttluint320Specifies the time-to-live value to use in outgoing packets.
    
-
    
-
    
-
    
-
    wifi-p2p setting
    
-
    Wi-Fi P2P Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-peerstring The P2P device that should be connected to. Currently this is the only way to create or join a group.
    
-wfd-iesbyte array The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.
    
-wps-methoduint320Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.
    
-
    
-
    
-
    
-
    wimax setting
    
-
    WiMax Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-mac-addressbyte array If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1
    
-network-namestring Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1
    
-
    
-
    
-
    
-
    802-3-ethernet setting
    
-
    Wired Ethernet Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-assigned-mac-addressstring The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
    
-auto-negotiatebooleanFALSEWhen TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.
    
-cloned-mac-addressbyte array This D-Bus field is deprecated in favor of "assigned-mac-address" which is more flexible and allows specifying special variants like "random". For libnm and nmcli, this field is called "cloned-mac-address".
    
-duplexstring When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.
    
-generate-mac-address-maskstring With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
-mac-addressbyte array If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
-mac-address-blacklistarray of string If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
-portstring Specific port type to use if the device supports multiple attachment methods.  One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored.
    
-s390-nettypestring s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems.
    
-s390-optionsdict of string to string{}Dictionary of key/value pairs of s390-specific device options.  Both keys and values must be strings.  Allowed keys include "portno", "layer2", "portname", "protocol", among others.  Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).
    
-s390-subchannelsarray of string Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
    
-speeduint320When a value greater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.
    
-wake-on-lanuint321The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
-wake-on-lan-passwordstring If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address.  If NULL, no password will be required.
    
-
    
-
    
-
    
-
    wireguard setting
    
-
    WireGuard Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-fwmarkuint320The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that "ip4-auto-default-route" or "ip6-auto-default-route" enabled, implies to automatically choose a fwmark.
    
-ip4-auto-default-routeNMTernary (int32) Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route from wireguard.peer-routes will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, an unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto and what WireGuard calls "Improved Rule-based Routing". Note that for this automatism to work, you usually don't want to set ipv4.gateway, because that will result in a conflicting default route. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips.
    
-ip6-auto-default-routeNMTernary (int32) Like ip4-auto-default-route, but for the IPv6 default route.
    
-listen-portuint320The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.
    
-peer-routesbooleanTRUEWhether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. Usually you want this automatism enabled. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively. Note that if the peer's AllowedIPs is "0.0.0.0/0" or "::/0" and the profile's ipv4.never-default or ipv6.never-default setting is enabled, the peer route for this peer won't be added automatically.
    
-peersarray of 'a{sv}' Array of dictionaries for the WireGuard peers.
    
-private-keystring The 256 bit private-key in base64 encoding.
    
-private-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key" property. (see the section called “Secret flag types:” for flag values)
    
-
    
-
    
-
    
-
    802-11-wireless setting
    
-
    Wi-Fi Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-assigned-mac-addressstring The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
    
-bandstring 802.11 frequency band of the network.  One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11.  This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible.  This setting depends on specific driver capability and may not work with all drivers.
    
-bssidbyte array If specified, directs the device to only associate with the given access point.  This capability is highly driver dependent and not supported by all devices.  Note: this property does not control the BSSID used when creating an Ad-Hoc network and is unlikely to in the future.
    
-channeluint320Wireless channel to use for the Wi-Fi connection.  The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel.  Because channel numbers overlap between bands, this property also requires the "band" property to be set.
    
-cloned-mac-addressbyte array This D-Bus field is deprecated in favor of "assigned-mac-address" which is more flexible and allows specifying special variants like "random". For libnm and nmcli, this field is called "cloned-mac-address".
    
-generate-mac-address-maskstring With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered.
    
-hiddenbooleanFALSEIf TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID.  However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air.
    
-mac-addressbyte array If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).
    
-mac-address-blacklistarray of string A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55").
    
-mac-address-randomizationuint320One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization),  NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1
    
-modestring Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap".  If blank, infrastructure is assumed.
    
-mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.
    
-powersaveuint320One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.
    
-rateuint320If non-zero, directs the device to only use the specified bitrate for communication with the access point.  Units are in Kb/s, ie 5500 = 5.5 Mbit/s.  This property is highly driver dependent and not all devices support setting a static bitrate.
    
-securityNone This property is deprecated, but can be set to the value '802-11-wireless-security' when a wireless security setting is also present in the connection dictionary, for compatibility with very old NetworkManager daemons.
    
-seen-bssidsarray of string A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.
    
-ssidbyte array SSID of the Wi-Fi network. Must be specified.
    
-tx-poweruint320If non-zero, directs the device to use the specified transmit power. Units are dBm.  This property is highly driver dependent and not all devices support setting a static transmit power.
    
-wake-on-wlanuint321The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager).
    
-
    
-
    
-
    
-
    802-11-wireless-security setting
    
-
    Wi-Fi Security Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-auth-algstring When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here.  One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP.  When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified.
    
-filsint320Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled.
    
-grouparray of string A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
    
-key-mgmtstring Key management used for the connection.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise).  This property must be set for any Wi-Fi connection that uses security.
    
-leap-passwordstring The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
-leap-password-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "leap-password" property. (see the section called “Secret flag types:” for flag values)
    
-leap-usernamestring The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap").
    
-pairwisearray of string A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".
    
-pmfint320Indicates whether Protected Management Frames (802.11w) must be enabled for the connection.  One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported).  When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled.
    
-protoarray of string List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.
    
-pskstring Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
    
-psk-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "psk" property. (see the section called “Secret flag types:” for flag values)
    
-wep-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. (see the section called “Secret flag types:” for flag values)
    
-wep-key-typeNMWepKeyType (uint32) Controls the interpretation of WEP keys.  Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key.
    
-wep-key0string Index 0 WEP key.  This is the WEP key used in most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
-wep-key1string Index 1 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
-wep-key2string Index 2 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
-wep-key3string Index 3 WEP key.  This WEP index is not used by most networks.  See the "wep-key-type" property for a description of how this key is interpreted.
    
-wep-tx-keyidxuint320When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here.  Valid values are 0 (default key) through 3.  Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4.
    
-wps-methoduint320Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1.
    
-
    
-
    
-
    
-
    wpan setting
    
-
    IEEE 802.15.4 (WPAN) MAC Settings.
    
-
    
------
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
    





    Key NameValue TypeDefault ValueValue Description
    
-channelint32-1IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
-mac-addressstring If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches.
    
-pageint32-1IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
    
-pan-iduint3265535IEEE 802.15.4 Personal Area Network (PAN) identifier.
    
-short-addressuint3265535Short IEEE 802.15.4 address to be used within a restricted environment.
    
-
    
-
    
-
    
-
    Secret flag types:
    
-
    
-            Each password or secret property in a setting has an associated flags property
-            that describes how to handle that secret. The flags property is a bitfield
-            that contains zero or more of the following values logically OR-ed together.
-          
    
-
      
-
    • 0x0 (none) - the system is responsible for providing and storing this secret. This
-              may be required so that secrets are already available before the user logs in.
-              It also commonly means that the secret will be stored in plain text on disk, accessible
-              to root only. For example via the keyfile settings plugin as described in the "PLUGINS" section
-              in NetworkManager.conf(5).
-              
      • 
-
    • 0x1 (agent-owned) - a user-session secret agent is responsible for providing and storing
-              this secret; when it is required, agents will be asked to provide it.
      • 
-
    • 0x2 (not-saved) - this secret should not be saved but should be requested from the user
-              each time it is required. This flag should be used for One-Time-Pad secrets, PIN codes from hardware tokens,
-              or if the user simply does not want to save the secret.
      • 
-
    • 0x4 (not-required) - in some situations it cannot be automatically determined that a secret
-              is required or not. This flag hints that the secret is not required and should not be requested from the user.
      • 
-
    
-
    
-
    
-
    
-
    Files
    
-
    /etc/NetworkManager/system-connections or distro plugin-specific location
    
-
    
-
    
-
    See Also
    
-
    NetworkManager(8),
-        nmcli(1),
-        nmcli-examples(7),
-        NetworkManager.conf(5)
    
-
    
-
    
-
    
-
    Generated by GTK-Doc V1.32
    
-
-
\ No newline at end of file
diff --git a/docs/api/html/nmcli-examples.html b/docs/api/html/nmcli-examples.html
index b06fa328..7becbb5b 100644
--- a/docs/api/html/nmcli-examples.html
+++ b/docs/api/html/nmcli-examples.html
@@ -187,7 +187,7 @@ B,DISPATCH
    This command activates a VPN connection profile enabling nmcli to interact with the user ('--ask'): this will allow nmcli to prompt for the VPN password on the command line when the password-flags are set to '0x02' ('always ask', see - nm-settings(5) + nm-settings(5) ). This is particularly useful for OTP based VPNs, as the user needs to be prompted for the password each time the connection is activated. @@ -641,7 +641,7 @@ Connection 'ethernet-4' (de89cdeb-a3e1-4d53-8fa0-c22546c775f4) successfully nmcli(1), NetworkManager(8), NetworkManager.conf(5), - nm-settings(5), + nm-settings(5), nm-online(1), nm-applet(1), nm-connection-editor(1) diff --git a/docs/api/html/nmcli.html b/docs/api/html/nmcli.html index 9c5099e0..9f808e66 100644 --- a/docs/api/html/nmcli.html +++ b/docs/api/html/nmcli.html @@ -483,7 +483,7 @@

    You can also specify particular fields. For static configuration, use setting and property names as described in - nm-settings(5) manual page. For active data use GENERAL, IP4, DHCP4, IP6, + nm-settings-nmcli(5) manual page. For active data use GENERAL, IP4, DHCP4, IP6, DHCP6, VPN.

    When no command is given to the nmcli connection, the default action is nmcli connection show.

    @@ -608,9 +608,9 @@

    To set the property just specify the property name followed by the value. An empty value ("") resets the property value to the default.

    -

    In addition to the properties, you can also use short names for some of - the properties. Consult the Property Aliases - section for details.

    +

    See nm-settings-nmcli(5) for complete reference of setting and property names, their descriptions + and default values. The setting and + property can be abbreviated provided they are unique.

    If you want to append an item or a flag to the existing value, use + prefix for the property name or alias. If you want to remove items from a container-type or flag property, use - prefix. @@ -621,9 +621,6 @@ These are for example multi-value (container) properties or flags like ipv4.dns, ip4, ipv4.addresses, bond.options, 802-1x.phase1-auth-flags etc.

    -

    See nm-settings(5) for complete reference of setting and property names, their descriptions - and default values. The setting and - property can be abbreviated provided they are unique.

    The connection is identified by its name, UUID or D-Bus path. If ID is ambiguous, a keyword id, uuid or path can be used.

    @@ -650,8 +647,7 @@

    Create a new connection using specified properties.

    You need to describe the newly created connections with the property and value pairs. - See nm-settings(5) for the complete reference. You can also use the aliases described in - Property Aliases section. The syntax is + See nm-settings-nmcli(5) for the complete reference. The syntax is the same as of the nmcli connection modify command.

    To construct a meaningful connection you at the very least need to set the connection.type property (or use the type alias) @@ -745,7 +741,7 @@

    See also - nm-settings(5) for all NetworkManager settings and property names, and their + nm-settings-nmcli(5) for all NetworkManager settings and property names, and their descriptions; and nmcli-examples(7) for sample editor sessions.

    @@ -948,11 +944,8 @@

    Modify the settings currently active on the device.

    This command lets you do temporary changes to a configuration active on a particular device. The changes are not preserved in the connection profile.

    -

    See nm-settings(5) for the list of available properties. Please note that some +

    See nm-settings-nmcli(5) for the list of available properties. Please note that some properties can't be changed on an already connected device.

    -

    You can also use the aliases described in - Property Aliases section. The syntax is - the same as of the nmcli connection modify command.

    @@ -1242,871 +1235,6 @@
    -

    Property Aliases

    -

    Apart from the property-value pairs, connection add, - connection modify and device modify also - accept short forms of some properties. They exist for convenience. Some aliases can - affect multiple connection properties at once.

    -

    The overview of the aliases is below. An actual connection type is used to - disambiguate these options from the options of the same name that are valid for - multiple connection types (such as mtu).

    -
    -

    Table 1. Options for all connections

    -
    ----- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    typeconnection.typeThis alias also accepts values of bond-slave, -team-slave and bridge-slave. They create -ethernet connection profiles. Their use is discouraged in -favor of using a specific type with master option.
    con-nameconnection.idWhen not provided a default name is generated: <type>[-<ifname>][-<num>]).
    autoconnectconnection.autoconnect 
    ifnameconnection.interface-nameA value of * will be interpreted as -no value, making the connection profile interface-independent. -Note: use quotes around * to suppress shell expansion. -For bond, team and bridge connections a default name will be generated if not set.
    masterconnection.masterValue specified here will be canonicalized. -It can be prefixed with ifname/, uuid/ -or id/ to disambiguate it.
    slave-typeconnection.slave-type 
    -
    -
    -

    Table 2. PPPoE options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    usernamepppoe.username
    passwordpppoe.password
    servicepppoe.service
    parentpppoe.parent
    -
    -
    -

    Table 3. Wired Ethernet options

    -
    ---- - - - - - - - - - - - - - - - - - - -
    AliasProperty
    mtuwired.mtu
    macwired.mac-address
    cloned-macwired.cloned-mac-address
    -
    -
    -

    Table 4. Infiniband options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    mtuinfiniband.mtu
    macinfiniband.mac-address
    transport-modeinfiniband.transport-mode
    parentinfiniband.parent
    p-keyinfiniband.p-key
    -
    -
    -

    Table 5. Wi-Fi options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    ssidwireless.ssid
    modewireless.mode
    mtuwireless.mtu
    macwireless.mac-address
    cloned-macwireless.cloned-mac-address
    -
    -
    -

    Table 6. WiMax options

    -
    ---- - - - - - - - - - - - - - - -
    AliasProperty
    nspwimax.network-name
    macwimax.mac-address
    -
    -
    -

    Table 7. GSM options

    -
    ---- - - - - - - - - - - - - - - - - - - -
    AliasProperty
    apngsm.apn
    usergsm.username
    passwordgsm.password
    -
    -
    -

    Table 8. CDMA options

    -
    ---- - - - - - - - - - - - - - - -
    AliasProperty
    usercdma.username
    passwordcdma.password
    -
    -
    -

    Table 9. Bluetooth options

    -
    ----- - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    addrbluetooth.bdaddr 
    bt-typebluetooth.typeApart from the usual panu, -nap and dun options, the values of -dun-gsm and dun-cdma can be used for compatibility -with older versions. They are equivalent to using dun and setting -appropriate gsm.* or cdma.* properties.
    -
    -
    -

    Table 10. VLAN options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    devvlan.parent
    idvlan.id
    flagsvlan.flags
    ingressvlan.ingress-priority-map
    egressvlan.egress-priority-map
    -
    -
    -

    Table 11. Bonding options

    -
    ----- - - - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    modebond.optionsSetting each of these adds the option to bond.options property. -It's equivalent to the +bond.options 'option=value' syntax.
    primary
    miimon
    downdelay
    updelay
    arp-interval
    arp-ip-target
    lacp-rate
    -
    -
    -

    Table 12. Team options

    -
    ----- - - - - - - - - - - -
    AliasPropertyNote
    configteam.configEither a filename or a team configuration in JSON format. To enforce one or the other, the value can be prefixed with "file://" or "json://".
    -
    -
    -

    Table 13. Team port options

    -
    ----- - - - - - - - - - - -
    AliasPropertyNote
    configteam-port.configEither a filename or a team configuration in JSON format. To enforce one or the other, the value can be prefixed with "file://" or "json://".
    -
    -
    -

    Table 14. Bridge options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    stpbridge.stp
    prioritybridge.priority
    forward-delaybridge.forward-delay
    hello-timebridge.hello-time
    max-agebridge.max-age
    ageing-timebridge.ageing-time
    group-forward-maskbridge.group-forward-mask
    multicast-snoopingbridge.multicast-snooping
    macbridge.mac-address
    prioritybridge-port.priority
    path-costbridge-port.path-cost
    hairpinbridge-port.hairpin-mode
    -
    -
    -

    Table 15. VPN options

    -
    ---- - - - - - - - - - - - - - - -
    AliasProperty
    vpn-typevpn.service-type
    uservpn.user-name
    -
    -
    -

    Table 16. OLPC Mesh options

    -
    ---- - - - - - - - - - - - - - - - - - - -
    AliasProperty
    ssidolpc-mesh.ssid
    channelolpc-mesh.channel
    dhcp-anycastolpc-mesh.dhcp-anycast-address
    -
    -
    -

    Table 17. ADSL options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    usernameadsl.username
    protocoladsl.protocol
    passwordadsl.password
    encapsulationadsl.encapsulation
    -
    -
    -

    Table 18. MACVLAN options

    -
    ---- - - - - - - - - - - - - - - - - - - -
    AliasProperty
    devmacvlan.parent
    modemacvlan.mode
    tapmacvlan.tap
    -
    -
    -

    Table 19. MACsec options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    devmacsec.parent
    modemacsec.mode
    encryptmacsec.encrypt
    cakmacsec.cak
    cknmacsec.ckn
    portmacsec.port
    -
    -
    -

    Table 20. VxLAN options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    idvxlan.id
    remotevxlan.remote
    devvxlan.parent
    localvxlan.local
    source-port-minvxlan.source-port-min
    source-port-maxvxlan.source-port-max
    destination-portvxlan.destination-port
    -
    -
    -

    Table 21. Tun options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    modetun.mode
    ownertun.owner
    grouptun.group
    pitun.pi
    vnet-hdrtun.vnet-hdr
    multi-queuetun.multi-queue
    -
    -
    -

    Table 22. IP tunneling options

    -
    ---- - - - - - - - - - - - - - - - - - - - - - - -
    AliasProperty
    modeip-tunnel.mode
    localip-tunnel.local
    remoteip-tunnel.remote
    devip-tunnel.parent
    -
    -
    -

    Table 23. WPAN options

    -
    ---- - - - - - - - - - - - - - - - - - - -
    AliasProperty
    macwpan.mac
    short-addrwpan.short-addr
    pan-idwpan.pan-id
    -
    -
    -

    Table 24. 6LoWPAN options

    -
    ---- - - - - - - - - -
    AliasProperty
    dev6lowpan.parent
    -
    -
    -

    Table 25. IPv4 options

    -
    ----- - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    ip4 -ipv4.addresses ipv4.method -The alias is equivalent to the +ipv4.addresses syntax and also sets ipv4.method to manual. It can be specified multiple times.
    gw4ipv4.gateway 
    -
    -
    -

    Table 26. IPv6 options

    -
    ----- - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    ip6 -ipv6.addresses ipv6.method -The alias is equivalent to the +ipv6.addresses syntax and also sets ipv6.method to manual. It can be specified multiple times.
    gw6ipv6.gateway 
    -
    -
    -

    Table 27. Proxy options

    -
    ----- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    AliasPropertyNote
    methodproxy.method 
    browser-onlyproxy.browser-only 
    pac-urlproxy.pac-url 
    pac-scriptproxy.pac-scriptRead the JavaScript PAC (proxy auto-config) script from file or pass it directly on the command line. Prefix the value with "file://" or "js://" to force one or the other.
    -
    -
    -
    -

    Colors

    Implicit coloring can be disabled by an empty file /etc/terminal-colors.d/nmcli.disable.

    @@ -2561,14 +1689,16 @@ It's equivalent to the +bond.options 'option=value'

    See Also

    -

    nmcli-examples(7), +

    + nmcli-examples(7), + nm-settings-nmcli(5), nm-online(1), NetworkManager(8), NetworkManager.conf(5), - nm-settings(5), nm-applet(1), nm-connection-editor(1), - terminal-colors.d(5).

    + terminal-colors.d(5). +

    diff --git a/docs/api/html/nmtui.html b/docs/api/html/nmtui.html index ecfd86e1..36c3e5c5 100644 --- a/docs/api/html/nmtui.html +++ b/docs/api/html/nmtui.html @@ -7,7 +7,7 @@ - + @@ -17,7 +17,7 @@ Home Up Prev -Next +Next
    diff --git a/docs/api/html/settings-6lowpan.html b/docs/api/html/settings-6lowpan.html index a19fb395..68f6b54c 100644 --- a/docs/api/html/settings-6lowpan.html +++ b/docs/api/html/settings-6lowpan.html @@ -38,7 +38,7 @@ Properties
    -

    Table 70. 

    +

    Table 43. 

    diff --git a/docs/api/html/settings-802-11-olpc-mesh.html b/docs/api/html/settings-802-11-olpc-mesh.html index 6b2bb363..e98e2049 100644 --- a/docs/api/html/settings-802-11-olpc-mesh.html +++ b/docs/api/html/settings-802-11-olpc-mesh.html @@ -38,7 +38,7 @@ Properties
    -

    Table 90. 

    +

    Table 63. 

    diff --git a/docs/api/html/settings-802-11-wireless-security.html b/docs/api/html/settings-802-11-wireless-security.html index e5e26294..69e6f5a9 100644 --- a/docs/api/html/settings-802-11-wireless-security.html +++ b/docs/api/html/settings-802-11-wireless-security.html @@ -38,7 +38,7 @@ Properties
    -

    Table 115. 

    +

    Table 88. 

    diff --git a/docs/api/html/settings-802-11-wireless.html b/docs/api/html/settings-802-11-wireless.html index 8b607e85..4d73692a 100644 --- a/docs/api/html/settings-802-11-wireless.html +++ b/docs/api/html/settings-802-11-wireless.html @@ -38,7 +38,7 @@ Properties
    -

    Table 114. 

    +

    Table 87. 

    @@ -139,7 +139,7 @@ - + diff --git a/docs/api/html/settings-802-1x.html b/docs/api/html/settings-802-1x.html index 8670df66..4bd4591a 100644 --- a/docs/api/html/settings-802-1x.html +++ b/docs/api/html/settings-802-1x.html @@ -38,7 +38,7 @@ Properties
    -

    Table 71. 

    +

    Table 44. 

    security
    None
    		
 
    		
 This property is deprecated, but can be set to the value '802-11-wireless-security' when a wireless security setting is also present in the connection dictionary, for compatibility with very old NetworkManager daemons.
 
    
 
    diff --git a/docs/api/html/settings-802-3-ethernet.html b/docs/api/html/settings-802-3-ethernet.html
index 7c3f7f03..b7b90e8c 100644
--- a/docs/api/html/settings-802-3-ethernet.html
+++ b/docs/api/html/settings-802-3-ethernet.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 112. 
    
+
    Table 85. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-adsl.html b/docs/api/html/settings-adsl.html
index 3a83ea63..526a512c 100644
--- a/docs/api/html/settings-adsl.html
+++ b/docs/api/html/settings-adsl.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 72. 
    
+
    Table 45. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-bluetooth.html b/docs/api/html/settings-bluetooth.html
index e7de9df8..4de750fd 100644
--- a/docs/api/html/settings-bluetooth.html
+++ b/docs/api/html/settings-bluetooth.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 73. 
    
+
    Table 46. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-bond.html b/docs/api/html/settings-bond.html
index 8bb39479..3a98433e 100644
--- a/docs/api/html/settings-bond.html
+++ b/docs/api/html/settings-bond.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 74. 
    
+
    Table 47. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-bridge-port.html b/docs/api/html/settings-bridge-port.html
index c139fc33..f7e67a50 100644
--- a/docs/api/html/settings-bridge-port.html
+++ b/docs/api/html/settings-bridge-port.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 76. 
    
+
    Table 49. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-bridge.html b/docs/api/html/settings-bridge.html
index 85f8122a..e4f26f5f 100644
--- a/docs/api/html/settings-bridge.html
+++ b/docs/api/html/settings-bridge.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 75. 
    
+
    Table 48. 
    
 
    
 
 

 
    @@ -102,12 +102,54 @@
 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
@@ -117,7 +159,7 @@
 
-
+
@@ -126,6 +168,18 @@
 
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/docs/api/html/settings-cdma.html b/docs/api/html/settings-cdma.html
index 77209f5c..a8b9dfc7 100644
--- a/docs/api/html/settings-cdma.html
+++ b/docs/api/html/settings-cdma.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 77. 
    
+
    Table 50. 
    
 
    
 
 

    The Spanning Tree Protocol (STP) maximum message age, in seconds.
 
    
 
    multicast-hash-max
    uint32
    4096
    		Set maximum size of multicast hash table (value must be a power of 2).
    multicast-last-member-count
    uint32
    2
    		Set the number of queries the bridge will send before stopping forwarding a multicast group after a "leave" message has been received.
    multicast-last-member-interval
    uint64
    100
    		Set interval (in deciseconds) between queries to find remaining members of a group, after a "leave" message is received.
    multicast-membership-interval
    uint64
    26000
    		Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received.
    
 
    multicast-querier
    		
 
    boolean
    		
 
    FALSE
    		
 Enable or disable sending of multicast queries by the bridge. If not specified the option is disabled.
 
    
 
    multicast-querier-interval
    uint64
    25500
    		If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries.
    multicast-query-interval
    uint64
    12500
    		Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase.
    multicast-query-response-interval
    uint64
    1000
    		Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge.
    
 
    multicast-query-use-ifaddr
    		
 
    boolean
    		
 
    FALSE
    multicast-router
    		
 
    string
    		
 
    		Sets bridge's multicast router. multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled'. If not specified the default value is 'auto'.Sets bridge's multicast router. Multicast-snooping must be enabled for this option to work. Supported values are: 'auto', 'disabled', 'enabled'. If not specified the default value is 'auto'.
 
    
 
    
 
    multicast-snooping
    		Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved.
 
    
 
    multicast-startup-query-count
    uint32
    2
    		Set the number of IGMP queries to send during startup phase.
    multicast-startup-query-interval
    uint64
    3125
    		Sets the time (in deciseconds) between queries sent out at startup to determine membership information.
    
 
    priority
    		
 
    uint32
    		
 
    32768
    		
 
    diff --git a/docs/api/html/settings-connection.html b/docs/api/html/settings-connection.html
index fb1c2b33..7c6584ca 100644
--- a/docs/api/html/settings-connection.html
+++ b/docs/api/html/settings-connection.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 69. 
    
+
    Table 42. 
    
 
    
 
 

 
    @@ -132,6 +132,12 @@
 
+
+
+
+
+
+
diff --git a/docs/api/html/settings-dcb.html b/docs/api/html/settings-dcb.html
index 00fbc674..5ec1e8ae 100644
--- a/docs/api/html/settings-dcb.html
+++ b/docs/api/html/settings-dcb.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 78. 
    
+
    Table 51. 
    
 
    
 
 

    Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately.
 
    
 
    mud-url
    string
    		If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with "https://". The special value "none" is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is "none".
    
 
    multi-connect
    		
 
    int32
    		
 
    0
    		
 
    diff --git a/docs/api/html/settings-dummy.html b/docs/api/html/settings-dummy.html
index 3f73337d..766ad25c 100644
--- a/docs/api/html/settings-dummy.html
+++ b/docs/api/html/settings-dummy.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 79. 
    
+
    Table 52. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ethtool.html b/docs/api/html/settings-ethtool.html
index 3945e18d..e18b212d 100644
--- a/docs/api/html/settings-ethtool.html
+++ b/docs/api/html/settings-ethtool.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 80. 
    
+
    Table 53. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-generic.html b/docs/api/html/settings-generic.html
index d4c6927f..f616d6b3 100644
--- a/docs/api/html/settings-generic.html
+++ b/docs/api/html/settings-generic.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 81. 
    
+
    Table 54. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-gsm.html b/docs/api/html/settings-gsm.html
index 8020b0e6..2aa45157 100644
--- a/docs/api/html/settings-gsm.html
+++ b/docs/api/html/settings-gsm.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 82. 
    
+
    Table 55. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-infiniband.html b/docs/api/html/settings-infiniband.html
index b516e014..d824d010 100644
--- a/docs/api/html/settings-infiniband.html
+++ b/docs/api/html/settings-infiniband.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 83. 
    
+
    Table 56. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ip-tunnel.html b/docs/api/html/settings-ip-tunnel.html
index 472283bf..cdd0c5be 100644
--- a/docs/api/html/settings-ip-tunnel.html
+++ b/docs/api/html/settings-ip-tunnel.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 86. 
    
+
    Table 59. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ipv4.html b/docs/api/html/settings-ipv4.html
index a8333ac5..b77f8555 100644
--- a/docs/api/html/settings-ipv4.html
+++ b/docs/api/html/settings-ipv4.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 84. 
    
+
    Table 57. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ipv6.html b/docs/api/html/settings-ipv6.html
index 3a614798..7f479272 100644
--- a/docs/api/html/settings-ipv6.html
+++ b/docs/api/html/settings-ipv6.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 85. 
    
+
    Table 58. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-macsec.html b/docs/api/html/settings-macsec.html
index d3efb4ff..2caf6e13 100644
--- a/docs/api/html/settings-macsec.html
+++ b/docs/api/html/settings-macsec.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 87. 
    
+
    Table 60. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-macvlan.html b/docs/api/html/settings-macvlan.html
index 2e5e126f..79191ee7 100644
--- a/docs/api/html/settings-macvlan.html
+++ b/docs/api/html/settings-macvlan.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 88. 
    
+
    Table 61. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-match.html b/docs/api/html/settings-match.html
index 89ff81b1..5bf05fb0 100644
--- a/docs/api/html/settings-match.html
+++ b/docs/api/html/settings-match.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 89. 
    
+
    Table 62. 
    
 
    
 
 

 
    @@ -52,12 +52,32 @@
 
-
+
+
+
+
+
+
+
+
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
    
 
 

    Default Value
 Value Description
 
    driver
    array of string
    		A list of driver names to match. Each element is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate driver name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
 
    interface-name
    		
 
    array of string
    		
 
    		
 A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    kernel-command-line
    array of string
    		A list of kernel command line arguments to match. This may be used to check whether a specific kernel command line option is set (or if prefixed with the exclamation mark unset). The argument must either be a single word, or an assignment (i.e. two words, separated "="). In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is looked for with right and left hand side matching.
    path
    array of string
    		A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form "pci-$domain:$bus:$device.$function", where each variable is an hexadecimal value; for example "pci-0000:0a:00.0". The path of a device can be obtained with "udevadm info /sys/class/net/$dev | grep ID_PATH=" or by looking at the "path" property exported by NetworkManager ("nmcli -f general.path device show $dev"). Each element of the list is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate path is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
    
 
    
 
    
 

    
diff --git a/docs/api/html/settings-ovs-bridge.html b/docs/api/html/settings-ovs-bridge.html
index 760c088e..7a72a02b 100644
--- a/docs/api/html/settings-ovs-bridge.html
+++ b/docs/api/html/settings-ovs-bridge.html
@@ -38,7 +38,7 @@
             Properties
         
 
    
-
    Table 91. 
    
+
    Table 64. 
    
 
    diff --git a/docs/api/html/settings-ovs-dpdk.html b/docs/api/html/settings-ovs-dpdk.html
index 486a2497..04166a4d 100644
--- a/docs/api/html/settings-ovs-dpdk.html
+++ b/docs/api/html/settings-ovs-dpdk.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 92. 
    
+
    Table 65. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ovs-interface.html b/docs/api/html/settings-ovs-interface.html
index d414827c..3780debb 100644
--- a/docs/api/html/settings-ovs-interface.html
+++ b/docs/api/html/settings-ovs-interface.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 93. 
    
+
    Table 66. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-ovs-patch.html b/docs/api/html/settings-ovs-patch.html
index bafe56fe..be3f0ba0 100644
--- a/docs/api/html/settings-ovs-patch.html
+++ b/docs/api/html/settings-ovs-patch.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 94. 
    
+
    Table 67. 
    
 
    
 
 

 
    @@ -56,7 +56,7 @@
 
-
+
    
 
 

    peer
    		
 
    string
    		
 
    		Specifies the unicast destination IP address of a remote Open vSwitch bridge port to connect to.Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer.
 
    
 
    
 
    
diff --git a/docs/api/html/settings-ovs-port.html b/docs/api/html/settings-ovs-port.html
index 67dbd83e..fe640d73 100644
--- a/docs/api/html/settings-ovs-port.html
+++ b/docs/api/html/settings-ovs-port.html
@@ -38,7 +38,7 @@
             Properties
         
 
    
-
    Table 95. 
    
+
    Table 68. 
    
 
    diff --git a/docs/api/html/settings-ppp.html b/docs/api/html/settings-ppp.html
index 13802e23..85e396a2 100644
--- a/docs/api/html/settings-ppp.html
+++ b/docs/api/html/settings-ppp.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 96. 
    
+
    Table 69. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-pppoe.html b/docs/api/html/settings-pppoe.html
index 5db5080c..dd229340 100644
--- a/docs/api/html/settings-pppoe.html
+++ b/docs/api/html/settings-pppoe.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 97. 
    
+
    Table 70. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-proxy.html b/docs/api/html/settings-proxy.html
index 4163e9cd..7d37fca3 100644
--- a/docs/api/html/settings-proxy.html
+++ b/docs/api/html/settings-proxy.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 98. 
    
+
    Table 71. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-serial.html b/docs/api/html/settings-serial.html
index eafc21fc..9702e47c 100644
--- a/docs/api/html/settings-serial.html
+++ b/docs/api/html/settings-serial.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 99. 
    
+
    Table 72. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-sriov.html b/docs/api/html/settings-sriov.html
index f6607dd4..7a9a51dc 100644
--- a/docs/api/html/settings-sriov.html
+++ b/docs/api/html/settings-sriov.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 100. 
    
+
    Table 73. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-tc.html b/docs/api/html/settings-tc.html
index 8296be1f..dfcce30e 100644
--- a/docs/api/html/settings-tc.html
+++ b/docs/api/html/settings-tc.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 101. 
    
+
    Table 74. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-team-port.html b/docs/api/html/settings-team-port.html
index ce49a681..2f10812a 100644
--- a/docs/api/html/settings-team-port.html
+++ b/docs/api/html/settings-team-port.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 103. 
    
+
    Table 76. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-team.html b/docs/api/html/settings-team.html
index e1831017..516dce89 100644
--- a/docs/api/html/settings-team.html
+++ b/docs/api/html/settings-team.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 102. 
    
+
    Table 75. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-tun.html b/docs/api/html/settings-tun.html
index bf7cb221..e1b68780 100644
--- a/docs/api/html/settings-tun.html
+++ b/docs/api/html/settings-tun.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 104. 
    
+
    Table 77. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-user.html b/docs/api/html/settings-user.html
index 6b2b3a3b..af23e2ad 100644
--- a/docs/api/html/settings-user.html
+++ b/docs/api/html/settings-user.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 105. 
    
+
    Table 78. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-vlan.html b/docs/api/html/settings-vlan.html
index b7ee13bc..fd8dbd16 100644
--- a/docs/api/html/settings-vlan.html
+++ b/docs/api/html/settings-vlan.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 106. 
    
+
    Table 79. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-vpn.html b/docs/api/html/settings-vpn.html
index 521d00a5..a63cf647 100644
--- a/docs/api/html/settings-vpn.html
+++ b/docs/api/html/settings-vpn.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 107. 
    
+
    Table 80. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-vrf.html b/docs/api/html/settings-vrf.html
index e44dc479..fbfd1702 100644
--- a/docs/api/html/settings-vrf.html
+++ b/docs/api/html/settings-vrf.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 108. 
    
+
    Table 81. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-vxlan.html b/docs/api/html/settings-vxlan.html
index dc478037..7c180836 100644
--- a/docs/api/html/settings-vxlan.html
+++ b/docs/api/html/settings-vxlan.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 109. 
    
+
    Table 82. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-wifi-p2p.html b/docs/api/html/settings-wifi-p2p.html
index 553d4cbd..24dce404 100644
--- a/docs/api/html/settings-wifi-p2p.html
+++ b/docs/api/html/settings-wifi-p2p.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 110. 
    
+
    Table 83. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-wimax.html b/docs/api/html/settings-wimax.html
index 24439977..2fcca5b7 100644
--- a/docs/api/html/settings-wimax.html
+++ b/docs/api/html/settings-wimax.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 111. 
    
+
    Table 84. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-wireguard.html b/docs/api/html/settings-wireguard.html
index fd8b55eb..d37ffbf5 100644
--- a/docs/api/html/settings-wireguard.html
+++ b/docs/api/html/settings-wireguard.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 113. 
    
+
    Table 86. 
    
 
    
 
 

 
    diff --git a/docs/api/html/settings-wpan.html b/docs/api/html/settings-wpan.html
index f2d9f662..e72a00fa 100644
--- a/docs/api/html/settings-wpan.html
+++ b/docs/api/html/settings-wpan.html
@@ -38,7 +38,7 @@
             Properties
         
    
-
    Table 116. 
    
+
    Table 89. 
    
 
    
 
 

 
    -- 
cgit 1.3.0-6-gf8a5