From 88c227d90a6b7b388c5c85d72802a0ca8f05ed5c Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Thu, 13 Jan 2022 22:30:39 +0100 Subject: New upstream version 1.34.0 --- docs/api/html/NetworkManager.conf.html | 4 + docs/api/html/NetworkManager.devhelp2 | 2 + docs/api/html/ch01.html | 3 + ...org.freedesktop.NetworkManager.Device.Bond.html | 5 +- ...g.freedesktop.NetworkManager.Device.Bridge.html | 5 +- ...reedesktop.NetworkManager.Device.OvsBridge.html | 5 +- ....freedesktop.NetworkManager.Device.OvsPort.html | 5 +- ...org.freedesktop.NetworkManager.Device.Team.html | 5 +- ...dbus-org.freedesktop.NetworkManager.Device.html | 16 + docs/api/html/index.html | 7 +- docs/api/html/ix01.html | 52 +- docs/api/html/nm-settings-dbus.html | 49 +- docs/api/html/nm-settings-ifcfg-rh.html | 98 ++-- docs/api/html/nm-settings-nmcli.html | 535 +++++++++++++++++++-- docs/api/html/nmcli.html | 32 +- docs/api/html/ref-settings.html | 3 + docs/api/html/settings-6lowpan.html | 2 +- docs/api/html/settings-802-11-olpc-mesh.html | 2 +- .../html/settings-802-11-wireless-security.html | 2 +- docs/api/html/settings-802-11-wireless.html | 2 +- docs/api/html/settings-802-1x.html | 2 +- docs/api/html/settings-802-3-ethernet.html | 4 +- docs/api/html/settings-adsl.html | 2 +- docs/api/html/settings-bluetooth.html | 2 +- docs/api/html/settings-bond-port.html | 69 +++ docs/api/html/settings-bond.html | 2 +- docs/api/html/settings-bridge-port.html | 2 +- docs/api/html/settings-bridge.html | 2 +- docs/api/html/settings-cdma.html | 2 +- docs/api/html/settings-connection.html | 12 +- docs/api/html/settings-dcb.html | 6 +- docs/api/html/settings-dummy.html | 2 +- docs/api/html/settings-ethtool.html | 2 +- docs/api/html/settings-generic.html | 2 +- docs/api/html/settings-gsm.html | 2 +- docs/api/html/settings-hostname.html | 8 +- docs/api/html/settings-infiniband.html | 2 +- docs/api/html/settings-ip-tunnel.html | 2 +- docs/api/html/settings-ipv4.html | 2 +- docs/api/html/settings-ipv6.html | 2 +- docs/api/html/settings-macsec.html | 2 +- docs/api/html/settings-macvlan.html | 2 +- docs/api/html/settings-match.html | 2 +- docs/api/html/settings-ovs-bridge.html | 2 +- docs/api/html/settings-ovs-dpdk.html | 2 +- docs/api/html/settings-ovs-external-ids.html | 4 +- docs/api/html/settings-ovs-interface.html | 2 +- docs/api/html/settings-ovs-patch.html | 2 +- docs/api/html/settings-ovs-port.html | 2 +- docs/api/html/settings-ppp.html | 2 +- docs/api/html/settings-pppoe.html | 2 +- docs/api/html/settings-proxy.html | 2 +- docs/api/html/settings-serial.html | 2 +- docs/api/html/settings-sriov.html | 2 +- docs/api/html/settings-tc.html | 2 +- docs/api/html/settings-team-port.html | 2 +- docs/api/html/settings-team.html | 2 +- docs/api/html/settings-tun.html | 2 +- docs/api/html/settings-user.html | 2 +- docs/api/html/settings-veth.html | 4 +- docs/api/html/settings-vlan.html | 2 +- docs/api/html/settings-vpn.html | 2 +- docs/api/html/settings-vrf.html | 2 +- docs/api/html/settings-vxlan.html | 2 +- docs/api/html/settings-wifi-p2p.html | 2 +- docs/api/html/settings-wimax.html | 2 +- docs/api/html/settings-wireguard.html | 2 +- docs/api/html/settings-wpan.html | 6 +- docs/api/html/style.css | 6 +- 69 files changed, 835 insertions(+), 198 deletions(-) create mode 100644 docs/api/html/settings-bond-port.html (limited to 'docs/api/html') diff --git a/docs/api/html/NetworkManager.conf.html b/docs/api/html/NetworkManager.conf.html index e8efb5e7..d1a0cc39 100644 --- a/docs/api/html/NetworkManager.conf.html +++ b/docs/api/html/NetworkManager.conf.html @@ -752,6 +752,10 @@ ipv6.ip6-privacy=0

If unspecified, the ultimate default values depends on the DNS plugin. With systemd-resolved the default currently is "no" (0) and for all other plugins also "no" (0).

+

connection.dns-over-tls

+

If unspecified, the ultimate default values depends on the DNS plugin. With systemd-resolved the default currently is global setting and for all other plugins "no" (0).

+ +

connection.stable-id

diff --git a/docs/api/html/NetworkManager.devhelp2 b/docs/api/html/NetworkManager.devhelp2 index fdb8d01c..613b9266 100644 --- a/docs/api/html/NetworkManager.devhelp2 +++ b/docs/api/html/NetworkManager.devhelp2 @@ -67,6 +67,7 @@ + @@ -283,6 +284,7 @@ + diff --git a/docs/api/html/ch01.html b/docs/api/html/ch01.html index 4cbe2f6d..9863c8bd 100644 --- a/docs/api/html/ch01.html +++ b/docs/api/html/ch01.html @@ -168,6 +168,9 @@ wpan — IEEE 802.15.4 (WPAN) MAC Settings
+bond-port — Bond Port Settings +
+
hostname — Hostname settings
diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html index 941bedef..7799cb8a 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bond.html @@ -75,8 +75,9 @@ Carrier readable b 
 Slaves  readable   ao
-

Array of object paths representing devices which are currently enslaved to - this device. +

DEPRECATED. Use the "Ports" property in + "org.freedesktop.NetworkManager.Device" instead which exists since + version NetworkManager 1.34.0.

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html index c4142b6f..43bdf84d 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Bridge.html @@ -75,8 +75,9 @@ Carrier readable b 
 Slaves  readable   ao
-

Array of object paths representing devices which are currently enslaved to - this device. +

DEPRECATED. Use the "Ports" property in + "org.freedesktop.NetworkManager.Device" instead which exists since + version NetworkManager 1.34.0.

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsBridge.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsBridge.html index 117372d6..e5e0d5ab 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsBridge.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsBridge.html @@ -49,8 +49,9 @@ 
 Slaves  readable   ao
-

Array of object paths representing ports which are currently enslaved to - this bridge. +

DEPRECATED. Use the "Ports" property in + "org.freedesktop.NetworkManager.Device" instead which exists since + version NetworkManager 1.34.0.

Since: 1.14

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsPort.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsPort.html index bbae6f4a..542df52b 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsPort.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.OvsPort.html @@ -49,8 +49,9 @@ 
 Slaves  readable   ao
-

Array of object paths representing interfaces which are currently enslaved to - this port. +

DEPRECATED. Use the "Ports" property in + "org.freedesktop.NetworkManager.Device" instead which exists since + version NetworkManager 1.34.0.

Since: 1.14

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html index d9780576..ad6d735f 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Team.html @@ -76,8 +76,9 @@ Carrier readable b 
 Slaves  readable   ao
-

Array of object paths representing devices which are currently enslaved to - this device. +

DEPRECATED. Use the "Ports" property in + "org.freedesktop.NetworkManager.Device" instead which exists since + version NetworkManager 1.34.0.

diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html index 058b5b5e..2cb81d13 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.html @@ -88,6 +88,7 @@ Ip6Connectivity readable u InterfaceFlags readable u HwAddress readable s +Ports readable ao
@@ -602,6 +603,21 @@ HwAddress readable s

Since: 1.24

+
+
+

The "Ports" property

+
+Ports  readable   ao
+
+

The port devices of the controller device. +

+

Array of object paths representing devices which are currently set as + port of this device. This replaces the 'Slaves' properties on the + device-specific D-Bus interfaces. +

+

Since: 1.34 +

+
diff --git a/docs/api/html/index.html b/docs/api/html/index.html index d9fbb4a1..e53118af 100644 --- a/docs/api/html/index.html +++ b/docs/api/html/index.html @@ -16,10 +16,10 @@

- for NetworkManager 1.32.12 + for NetworkManager 1.34.0 The latest version of this documentation can be found on-line at - https://developer.gnome.org/NetworkManager/stable/. + https://networkmanager.dev/docs/api/latest/.

Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetworkManager Authors

@@ -261,6 +261,9 @@ wpan — IEEE 802.15.4 (WPAN) MAC Settings
+bond-port — Bond Port Settings +
+
hostname — Hostname settings
diff --git a/docs/api/html/ix01.html b/docs/api/html/ix01.html index 289ae66a..2ee52be7 100644 --- a/docs/api/html/ix01.html +++ b/docs/api/html/ix01.html @@ -368,6 +368,8 @@
org.freedesktop.NetworkManager.Device:PhysicalPortId, The "PhysicalPortId" property
+
org.freedesktop.NetworkManager.Device:Ports, The "Ports" property +
org.freedesktop.NetworkManager.Device:Real, The "Real" property
org.freedesktop.NetworkManager.Device:State, The "State" property @@ -760,6 +762,8 @@
dns-options, ipv4, ipv6
+
dns-over-tls, connection +
dns-priority, ipv4, ipv6
dns-search, ipv4, ipv6 @@ -802,9 +806,9 @@
forward-delay, bridge
-
from-dhcp, hostname +
from-dhcp, hostname
-
from-dns-lookup, hostname +
from-dns-lookup, hostname
fwmark, wireguard
@@ -815,7 +819,7 @@
gateway, ipv4, ipv6
-
gateway-ping-timeout, connection +
gateway-ping-timeout, connection
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless
@@ -843,7 +847,7 @@

I

-
id, connection, vlan, vxlan +
id, connection, vlan, vxlan
identity, 802-1x
@@ -855,7 +859,7 @@
input-key, ip-tunnel
-
interface-name, connection, bond, bridge, match, team, vlan +
interface-name, connection, bond, bridge, match, team, vlan
ip4-auto-default-route, wireguard
@@ -905,9 +909,9 @@
listen-port, wireguard
-
lldp, connection +
lldp, connection
-
llmnr, connection +
llmnr, connection
local, ip-tunnel, vxlan
@@ -1018,7 +1022,7 @@
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property
-
master, connection +
master, connection
max-age, bridge
@@ -1030,9 +1034,9 @@
mcast-snooping-enable, ovs-bridge
-
mdns, connection +
mdns, connection
-
metered, connection +
metered, connection
method, ipv4, ipv6, proxy
@@ -1050,9 +1054,9 @@
mtu, cdma, gsm, infiniband, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless
-
mud-url, connection +
mud-url, connection
-
multi-connect, connection +
multi-connect, connection
multi-queue, tun
@@ -1184,7 +1188,7 @@

O

-
only-from-default, hostname +
only-from-default, hostname
optional, 802-1x
@@ -1237,7 +1241,7 @@
peers, wireguard
-
permissions, connection +
permissions, connection
persistent, vpn
@@ -1352,7 +1356,7 @@
qdiscs, tc
-
queue-id, team-port +
queue-id, team-port, bond-port
@@ -1363,7 +1367,7 @@
rate, 802-11-wireless
-
read-only, connection +
read-only, connection
refuse-chap, ppp
@@ -1426,7 +1430,7 @@
s390-subchannels, 802-3-ethernet
-
secondaries, connection +
secondaries, connection
secrets, vpn
@@ -1448,7 +1452,7 @@
sim-operator-id, gsm
-
slave-type, connection +
slave-type, connection
source-port-max, vxlan
@@ -1458,7 +1462,7 @@
ssid, 802-11-olpc-mesh, 802-11-wireless
-
stable-id, connection +
stable-id, connection
sticky, team-port
@@ -1487,7 +1491,7 @@
timeout, vpn
-
timestamp, connection +
timestamp, connection
token, ipv6
@@ -1501,7 +1505,7 @@
tx-power, 802-11-wireless
-
type, connection, bluetooth, ovs-interface +
type, connection, bluetooth, ovs-interface
@@ -1512,7 +1516,7 @@
username, adsl, cdma, gsm, pppoe
-
uuid, connection +
uuid, connection
@@ -1590,7 +1594,7 @@

W

-
wait-device-timeout, connection +
wait-device-timeout, connection
wake-on-lan, 802-3-ethernet
@@ -1642,7 +1646,7 @@

Z

-
zone, connection +
zone, connection
diff --git a/docs/api/html/nm-settings-dbus.html b/docs/api/html/nm-settings-dbus.html index 2fab4fd2..f9307059 100644 --- a/docs/api/html/nm-settings-dbus.html +++ b/docs/api/html/nm-settings-dbus.html @@ -122,14 +122,14 @@ autoconnect boolean TRUE -Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles. +Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles. autoconnect-priority int32 0 -The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority. +The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen. @@ -147,6 +147,13 @@ +dns-over-tls +int32 +-1 +Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: "yes" (2) use DNSOverTls and disabled fallback, "opportunistic" (1) use DNSOverTls but allow fallback to unencrypted resolution, "no" (0) don't ever use DNSOverTls. If unspecified "default" depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved. + + + gateway-ping-timeout uint32 0 @@ -1155,8 +1162,8 @@ app-fcoe-mode string -"fabric" -The FCoE controller mode; either "fabric" (default) or "vn2vn". +  +The FCoE controller mode; either "fabric" or "vn2vn". Since 1.34, NULL is the default and means "fabric". Before 1.34, NULL was rejected as invalid and the default was "fabric". @@ -3600,7 +3607,7 @@ s390-options dict of string to string {} -Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). +Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). Currently, NetworkManager itself does nothing with this information. However, s390utils ships a udev rule which parses this information and applies it to the interface. @@ -4097,7 +4104,33 @@
-

hostname setting

+

bond-port setting

+

Bond Port Settings.

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+queue-iduint320The queue ID of this bond port. The maximum value of queue ID is the number of TX queues currently active in device.
+
+
+
+

hostname setting

Hostname settings.

@@ -4146,7 +4179,7 @@
-

ovs-external-ids setting

+

ovs-external-ids setting

OVS External IDs Settings.

@@ -4172,7 +4205,7 @@
-

veth setting

+

veth setting

Veth Settings.

diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 0315a5eb..b4400d0d 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -602,7 +602,32 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12

-

Table 13. bond setting

+

Table 13. bond-port setting

+
++++++ + + + + + + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
queue-idBONDING_OPTS: queue-id=0Queue ID. + +Allowed values: 0 - 65535
+
+
+

Table 14. bond setting

@@ -627,7 +652,7 @@ Example: BONDING_OPTS="miimon=100 mode=broadcast"

-

Table 14. bridge-port setting

+

Table 15. bridge-port setting

@@ -676,7 +701,7 @@ Example: BRIDGE_PORT_VLANS="1 pvid untagged,20,300-400 untagged"

-

Table 15. bridge setting

+

Table 16. bridge setting

@@ -915,7 +940,7 @@ Example: BRIDGING_OPTS="multicast_startup_query_interval=4000"
-

Table 16. connection setting

+

Table 17. connection setting

@@ -1109,6 +1134,15 @@ Example: LLMNR=yes Allowed values: yes,no,resolve + + + + + + @@ -1133,7 +1167,7 @@ Allowed values: a valid URL that points to recommended policy fo
dns-over-tlsDNS_OVER_TLS(+) +missing variable means global defaultWhether or not DNSOverTls is enabled for the connection + +Allowed values: yes,no,opportunistic
wait-device-timeout DEVTIMEOUT(+)

-

Table 17. dcb setting

+

Table 18. dcb setting

@@ -1268,7 +1302,7 @@ Example: DCB_PG_UP2TC=01623701 used explicitly to enable DCB so that the rest of the DCB_* variables can apply.

-

Table 18. ethtool setting

+

Table 19. ethtool setting

@@ -1286,7 +1320,7 @@ Example: DCB_PG_UP2TC=01623701

-

Table 19. hostname setting

+

Table 20. hostname setting

@@ -1341,7 +1375,7 @@ Example: HOSTNAME_ONLY_FROM_DEFAULT=0,1

-

Table 20. infiniband setting

+

Table 21. infiniband setting

@@ -1396,7 +1430,7 @@ Example: PHYSDEV=ib0

-

Table 21. ipv4 setting

+

Table 22. ipv4 setting

@@ -1573,7 +1607,7 @@ Example: DHCP_VENDOR_CLASS_IDENTIFIER=foo

-

Table 22. ipv6 setting

+

Table 23. ipv6 setting

@@ -1762,7 +1796,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 23. match setting

+

Table 24. match setting

@@ -1787,7 +1821,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 24. ovs-bridge setting

+

Table 25. ovs-bridge setting

@@ -1805,7 +1839,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 25. ovs-dpdk setting

+

Table 26. ovs-dpdk setting

@@ -1823,7 +1857,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 26. ovs-external-ids setting

+

Table 27. ovs-external-ids setting

@@ -1841,7 +1875,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 27. ovs-interface setting

+

Table 28. ovs-interface setting

@@ -1859,7 +1893,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 28. ovs-patch setting

+

Table 29. ovs-patch setting

@@ -1877,7 +1911,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 29. ovs-port setting

+

Table 30. ovs-port setting

@@ -1895,7 +1929,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 30. proxy setting

+

Table 31. proxy setting

@@ -1948,7 +1982,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac

-

Table 31. sriov setting

+

Table 32. sriov setting

@@ -1993,7 +2027,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1

-

Table 32. tc setting

+

Table 33. tc setting

@@ -2030,7 +2064,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 33. team-port setting

+

Table 34. team-port setting

@@ -2053,7 +2087,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 34. team setting

+

Table 35. team setting

@@ -2076,7 +2110,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 35. user setting

+

Table 36. user setting

@@ -2101,7 +2135,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 36. veth setting

+

Table 37. veth setting

@@ -2119,7 +2153,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 37. vlan setting

+

Table 38. vlan setting

@@ -2182,7 +2216,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 38. vrf setting

+

Table 39. vrf setting

@@ -2200,7 +2234,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 39. wifi-p2p setting

+

Table 40. wifi-p2p setting

@@ -2218,7 +2252,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 40. 802-3-ethernet setting

+

Table 41. 802-3-ethernet setting

@@ -2339,7 +2373,7 @@ Example: ETHTOOL_OPTS="wol gs sopass 00:11:22:33:44:55"

-

Table 41. wireguard setting

+

Table 42. wireguard setting

@@ -2357,7 +2391,7 @@ Example: ETHTOOL_OPTS="wol gs sopass 00:11:22:33:44:55"

-

Table 42. 802-11-wireless-security setting

+

Table 43. 802-11-wireless-security setting

@@ -2539,7 +2573,7 @@ Allowed values: default, disable, optional, required

-

Table 43. 802-11-wireless setting

+

Table 44. 802-11-wireless setting

@@ -2696,7 +2730,7 @@ Allowed values: "yes", "no"

-

Table 44. wpan setting

+

Table 45. wpan setting

diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html index 1ce647f7..0043313f 100644 --- a/docs/api/html/nm-settings-nmcli.html +++ b/docs/api/html/nm-settings-nmcli.html @@ -91,7 +91,7 @@ @@ -99,7 +99,7 @@ @@ -121,6 +121,14 @@ + + + + @@ -408,8 +416,8 @@ @@ -474,8 +482,8 @@ @@ -492,8 +500,8 @@ @@ -574,8 +582,8 @@ @@ -608,8 +616,8 @@ @@ -650,8 +658,8 @@ @@ -676,8 +684,8 @@ @@ -702,8 +710,8 @@ @@ -764,8 +772,8 @@ @@ -1214,8 +1222,8 @@ @@ -1257,7 +1265,7 @@ @@ -1818,8 +1826,8 @@ @@ -1836,8 +1844,8 @@ @@ -2550,8 +2558,8 @@ @@ -3148,8 +3156,8 @@ @@ -3345,17 +3353,424 @@ @@ -4155,7 +4570,7 @@ @@ -4268,8 +4683,8 @@ @@ -4508,8 +4923,8 @@ @@ -4558,8 +4973,8 @@ @@ -4568,8 +4983,8 @@ @@ -4701,7 +5116,31 @@
-

hostname setting

+

bond-port setting

+

Bond Port Settings.

+

+ Properties: +

+

Alias: autoconnect

-

Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.

+

Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.

Format: boolean

autoconnect-priority

 -

The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority.

+

The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen.

Format: int32

dns-over-tls

 +

Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: "yes" (2) use DNSOverTls and disabled fallback, "opportunistic" (1) use DNSOverTls but allow fallback to unencrypted resolution, "no" (0) don't ever use DNSOverTls. If unspecified "default" depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved.

+

+ Format: int32

+

gateway-ping-timeout

If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping.

@@ -374,8 +382,8 @@

ca-cert-password-flags

Flags indicating how to handle the "ca-cert-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

client-cert-password-flags

Flags indicating how to handle the "client-cert-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

password-flags

Flags indicating how to handle the "password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

password-raw-flags

Flags indicating how to handle the "password-raw" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

phase2-ca-cert-password-flags

Flags indicating how to handle the "phase2-ca-cert-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

phase2-client-cert-password-flags

Flags indicating how to handle the "phase2-client-cert-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

phase2-private-key-password-flags

Flags indicating how to handle the "phase2-private-key-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

pin-flags

Flags indicating how to handle the "pin" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

private-key-password-flags

Flags indicating how to handle the "private-key-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

password-flags

Flags indicating how to handle the "password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

password-flags

Flags indicating how to handle the "password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

app-fcoe-mode

 -

The FCoE controller mode; either "fabric" (default) or "vn2vn".

+

The FCoE controller mode; either "fabric" or "vn2vn". Since 1.34, NULL is the default and means "fabric". Before 1.34, NULL was rejected as invalid and the default was "fabric".

Format: string

password-flags

Flags indicating how to handle the "password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

pin-flags

Flags indicating how to handle the "pin" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

mka-cak-flags

Flags indicating how to handle the "mka-cak" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

password-flags

Flags indicating how to handle the "password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

qdiscs

 -

Array of TC queueing disciplines. When the "tc" setting is present, qdiscs from this property are applied upon activation. If the property is empty, all qdiscs are removed and the device will only have the default qdisc assigned by kernel according to the "net.core.default_qdisc" sysctl. If the "tc" setting is not present, NetworkManager doesn't touch the qdiscs present on the interface.

- Format: array of vardict

+Array of TC queueing disciplines. qdisc is a basic block in the +Linux traffic control subsystem +

+

+Each qdisc can be specified by the following attributes: +

+
++++ + + + + + + + + + + + + + + + + + + +

+handle HANDLE +

+specifies the qdisc handle. A qdisc, which potentially can have children, gets +assigned a major number, called a 'handle', leaving the minor number namespace +available for classes. The handle is expressed as '10:'. It is customary to +explicitly assign a handle to qdiscs expected to have children. +

+parent HANDLE +

+specifies the handle of the parent qdisc the current qdisc must be +attached to. +

+root +

+specifies that the qdisc is attached to the root of device. +

+KIND +

+this is the qdisc kind. NetworkManager currently supports the +following kinds: fq_codel, sfq, tbf. Each qdisc kind has a +different set of parameters, described below. There are also some +kinds like pfifo, pfifo_fast, prio supported by NetworkManager +but their parameters are not supported by NetworkManager. +

+

+Parameters for 'fq_codel': +

+
++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

+limit U32 +

+the hard limit on the real queue size. When this limit is +reached, incoming packets are dropped. Default is 10240 packets. +

+memory_limit U32 +

+sets a limit on the total number of bytes that can be queued in +this FQ-CoDel instance. The lower of the packet limit of the +limit parameter and the memory limit will be enforced. Default is +32 MB. +

+flows U32 +

+the number of flows into which the incoming packets are +classified. Due to the stochastic nature of hashing, multiple +flows may end up being hashed into the same slot. Newer flows +have priority over older ones. This parameter can be set only at +load time since memory has to be allocated for the hash table. +Default value is 1024. +

+target U32 +

+the acceptable minimum standing/persistent queue delay. This minimum +delay is identified by tracking the local minimum queue delay that packets +experience. The unit of measurement is microsecond(us). Default value is 5ms. +

+interval U32 +

+used to ensure that the measured minimum delay does not become too stale. +The minimum delay must be experienced in the last epoch of length .B +interval. It should be set on the order of the worst-case RTT +through the bottleneck to give endpoints sufficient time to +react. Default value is 100ms. +

+quantum U32 +

+the number of bytes used as 'deficit' in the fair queuing +algorithm. Default is set to 1514 bytes which corresponds to the +Ethernet MTU plus the hardware header length of 14 bytes. +

+ecn BOOL +

+can be used to mark packets instead of dropping them. ecn is turned +on by default. +

+ce_threshold U32 +

+sets a threshold above which all packets are marked with ECN +Congestion Experienced. This is useful for DCTCP-style congestion +control algorithms that require marking at very shallow queueing +thresholds. +

+

+Parameters for 'sfq': +

+
++++ + + + + + + + + + + + + + + + + + + + + + + + + + + +

+divisor U32 +

+can be used to set a different hash table size, available +from kernel 2.6.39 onwards. The specified divisor must be +a power of two and cannot be larger than 65536. Default +value: 1024. +

+limit U32 +

+Upper limit of the SFQ. Can be used to reduce the default +length of 127 packets. +

+depth U32 +

+Limit of packets per flow. Default to +127 and can be lowered. +

+perturb_period U32 +

+Interval in seconds for queue algorithm perturbation. +Defaults to 0, which means that no perturbation occurs. Do +not set too low for each perturbation may cause some +packet reordering or losses. Advised value: 60 This value +has no effect when external flow classification is used. +Its better to increase divisor value to lower risk of hash +collisions. +

+quantum U32 +

+Amount of bytes a flow is allowed to dequeue during a +round of the round robin process. Defaults to the MTU of +the interface which is also the advised value and the +minimum value. +

+flows U32 +

+Default value is 127. +

+

+Parameters for 'tbf': +

+
++++ + + + + + + + + + + + + + + + + + + +

+rate U64 +

+Bandwidth or rate. These parameters accept a floating +point number, possibly followed by either a unit (both SI +and IEC units supported), or a float followed by a percent +character to specify the rate as a percentage of the +device's speed. +

+burst U32 +

 +

+Also known as buffer or maxburst. Size of the bucket, in +bytes. This is the maximum amount of bytes that tokens can +be available for instantaneously. In general, larger +shaping rates require a larger buffer. For 10mbit/s on +Intel, you need at least 10kbyte buffer if you want to +reach your configured rate! +

+

+If your buffer is too small, packets may be dropped +because more tokens arrive per timer tick than fit in your +bucket. The minimum buffer size can be calculated by +dividing the rate by HZ. +

+

+Token usage calculations are performed using a table which +by default has a resolution of 8 packets. This resolution +can be changed by specifying the cell size with the burst. +For example, to specify a 6000 byte buffer with a 16 byte +cell size, set a burst of 6000/16. You will probably never +have to set this. Must be an integral power of 2. +

+

+limit U32 +

+Limit is the number of bytes that can be queued waiting +for tokens to become available. +

+latency U32 +

+specifies the maximum amount of time a packet can +sit in the TBF. The latency calculation takes into account +the size of the bucket, the rate and possibly the peakrate +(if set). The latency and limit are mutually exclusive. +

+

+ Format: GPtrArray(NMTCQdisc)

tfilters

 -

Array of TC traffic filters. When the "tc" setting is present, filters from this property are applied upon activation. If the property is empty, NetworkManager removes all the filters. If the "tc" setting is not present, NetworkManager doesn't touch the filters present on the interface.

- Format: array of vardict

+Array of TC traffic filters. Traffic control can manage the packet content during +classification by using filters. +

+

+Each tfilters can be specified by the following attributes: +

+
++++ + + + + + + + + + + + + + + + + + + +

+handle HANDLE +

+specifies the tfilters handle. A filter is used by a classful qdisc to determine in which class +a packet will be enqueued. It is important to notice that filters reside within qdiscs. Therefore, +see qdiscs handle for detailed information. +

+parent HANDLE +

+specifies the handle of the parent qdisc the current qdisc must be +attached to. +

+root +

+specifies that the qdisc is attached to the root of device. +

+KIND +

+this is the tfilters kind. NetworkManager currently supports +following kinds: mirred, simple. Each filter kind has a +different set of actions, described below. There are also some +other kinds like matchall, basic, u32 supported by NetworkManager. +

+

+Actions for 'mirred': +

+
++++ + + + + + + + + + + + + + + + + + + +

+egress bool +

+Define whether the packet should exit from the interface. +

+ingress bool +

+Define whether the packet should come into the interface. +

+mirror bool +

+Define whether the packet should be copied to the destination space. +

+redirect bool +

+Define whether the packet should be moved to the destination space. +

+

+Action for 'simple': +

+
++++ + + + + +

+sdata char[32] +

+The actual string to print. +

+

+ Format: GPtrArray(NMTCTfilter)

s390-options

 -

Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).

+

Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). Currently, NetworkManager itself does nothing with this information. However, s390utils ships a udev rule which parses this information and applies it to the interface.

Format: dict of string to string

private-key-flags

Flags indicating how to handle the "private-key" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

leap-password-flags

Flags indicating how to handle the "leap-password" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

psk-flags

Flags indicating how to handle the "psk" property. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)

wep-key-flags

Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. - See the section called “Secret flag types:” for flag values. -

+ See the section called “Secret flag types:” for flag values. +

Format: NMSettingSecretFlags (uint32)
++++ + + + + +

queue-id

 +

+ Alias: queue-id

+

The queue ID of this bond port. The maximum value of queue ID is the number of TX queues currently active in device.

+

+ Format: uint32

+
+
+
+
+

hostname setting

Hostname settings.

Properties: @@ -4749,7 +5188,7 @@

-

veth setting

+

veth setting

Veth Settings.

Properties: diff --git a/docs/api/html/nmcli.html b/docs/api/html/nmcli.html index 5e10c868..d33f9424 100644 --- a/docs/api/html/nmcli.html +++ b/docs/api/html/nmcli.html @@ -640,13 +640,13 @@ internally blocked from autoconnecting again. Hence it will not autoconnect until reboot or until the user performs an action that unblocks autoconnect, like modifying the profile or explicitly activating it.

-

In most cases you may want to use device disconnect +

In most cases you may want to use device down command instead.

The connection is identified by its name, UUID or D-Bus path. If ID is ambiguous, a keyword id, uuid, path or apath can be used.

-

See connection show above for the description of +

See connection show above for the description of the ID-specifying keywords.

If --wait option is not specified, the default timeout will be 10 seconds.

@@ -939,7 +939,7 @@

Device Management Commands

-

nmcli device { status | show | set | connect | reapply | modify | disconnect | delete | monitor | wifi | lldp } [ARGUMENTS...]

+

nmcli device { status | show | set | up | connect | reapply | modify | down | disconnect | delete | monitor | wifi | lldp } [ARGUMENTS...]

Show and manage network interfaces.

@@ -982,7 +982,7 @@ + + + + + + + +

- connect + up ifname

@@ -992,12 +992,20 @@

If no compatible connection exists, a new profile with default settings will be created and activated. This differentiates nmcli connection up ifname "$DEVICE" from - nmcli device connect "$DEVICE"

+ nmcli device up "$DEVICE"

If --wait option is not specified, the default timeout will be 90 seconds.

+ connect + ifname +

Alias for command up. Before version 1.34.0 up + was not supported.

reapply ifname @@ -1023,7 +1031,7 @@

- disconnect + down ifname...

@@ -1035,6 +1043,14 @@

+ disconnect + ifname... +

Alias for command down. Before version 1.34.0 down + was not supported.

delete ifname... @@ -1179,7 +1195,7 @@ according to Wi-Fi device capabilities and activates it on the device. The hotspot is secured with WPA if device/driver supports that, otherwise WEP is used. Use connection down or device - disconnect to stop the hotspot.

+ down to stop the hotspot.

Parameters of the hotspot can be influenced by the optional parameters:

@@ -1646,7 +1662,7 @@ - +

shows the status for all devices.

nmcli dev disconnect em2

nmcli dev down em2

disconnects a connection on interface em2 and marks the device as unavailable for auto-connecting. As a result, no connection will automatically be activated on the device until the device's 'autoconnect' is set to TRUE or diff --git a/docs/api/html/ref-settings.html b/docs/api/html/ref-settings.html index e09dc7b4..b2bacf2e 100644 --- a/docs/api/html/ref-settings.html +++ b/docs/api/html/ref-settings.html @@ -172,6 +172,9 @@ wpan — IEEE 802.15.4 (WPAN) MAC Settings

+bond-port — Bond Port Settings +
+
hostname — Hostname settings
diff --git a/docs/api/html/settings-6lowpan.html b/docs/api/html/settings-6lowpan.html index 9c89ffd6..7daf602d 100644 --- a/docs/api/html/settings-6lowpan.html +++ b/docs/api/html/settings-6lowpan.html @@ -38,7 +38,7 @@ Properties
-

Table 46. 

+

Table 47. 

diff --git a/docs/api/html/settings-802-11-olpc-mesh.html b/docs/api/html/settings-802-11-olpc-mesh.html index 2056a462..1dd33145 100644 --- a/docs/api/html/settings-802-11-olpc-mesh.html +++ b/docs/api/html/settings-802-11-olpc-mesh.html @@ -38,7 +38,7 @@ Properties
-

Table 66. 

+

Table 67. 

diff --git a/docs/api/html/settings-802-11-wireless-security.html b/docs/api/html/settings-802-11-wireless-security.html index 61fc285d..033d365e 100644 --- a/docs/api/html/settings-802-11-wireless-security.html +++ b/docs/api/html/settings-802-11-wireless-security.html @@ -38,7 +38,7 @@ Properties
-

Table 91. 

+

Table 92. 

diff --git a/docs/api/html/settings-802-11-wireless.html b/docs/api/html/settings-802-11-wireless.html index 71cafdf5..ecdbfab9 100644 --- a/docs/api/html/settings-802-11-wireless.html +++ b/docs/api/html/settings-802-11-wireless.html @@ -38,7 +38,7 @@ Properties
-

Table 90. 

+

Table 91. 

diff --git a/docs/api/html/settings-802-1x.html b/docs/api/html/settings-802-1x.html index 9747c482..a1f6f6cf 100644 --- a/docs/api/html/settings-802-1x.html +++ b/docs/api/html/settings-802-1x.html @@ -38,7 +38,7 @@ Properties
-

Table 47. 

+

Table 48. 

diff --git a/docs/api/html/settings-802-3-ethernet.html b/docs/api/html/settings-802-3-ethernet.html index 28eeeb1b..3b38ba11 100644 --- a/docs/api/html/settings-802-3-ethernet.html +++ b/docs/api/html/settings-802-3-ethernet.html @@ -38,7 +38,7 @@ Properties
-

Table 88. 

+

Table 89. 

@@ -123,7 +123,7 @@ - + diff --git a/docs/api/html/settings-adsl.html b/docs/api/html/settings-adsl.html index 1eb087dc..baa6ce9c 100644 --- a/docs/api/html/settings-adsl.html +++ b/docs/api/html/settings-adsl.html @@ -38,7 +38,7 @@ Properties
-

Table 48. 

+

Table 49. 

s390-options
 
dict of string to string
 
{}
Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]).Dictionary of key/value pairs of s390-specific device options. Both keys and values must be strings. Allowed keys include "portno", "layer2", "portname", "protocol", among others. Key names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). Currently, NetworkManager itself does nothing with this information. However, s390utils ships a udev rule which parses this information and applies it to the interface. 
s390-subchannels
diff --git a/docs/api/html/settings-bluetooth.html b/docs/api/html/settings-bluetooth.html index e7ceaf7f..76216b18 100644 --- a/docs/api/html/settings-bluetooth.html +++ b/docs/api/html/settings-bluetooth.html @@ -38,7 +38,7 @@ Properties
-

Table 49. 

+

Table 50. 

diff --git a/docs/api/html/settings-bond-port.html b/docs/api/html/settings-bond-port.html new file mode 100644 index 00000000..4516d8c5 --- /dev/null +++ b/docs/api/html/settings-bond-port.html @@ -0,0 +1,69 @@ + + + + +bond-port: NetworkManager Reference Manual + + + + + + + + + +
+ + + + + + +
+
+
+ + +
+

bond-port

+

bond-port — Bond Port Settings

+
+
+

+ Properties +

+
+

Table 94. 

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
queue-id
uint32
0
The queue ID of this bond port. The maximum value of queue ID is the number of TX queues currently active in device.
+
+


+
+
+
+
Generated by GTK-Doc V1.33.0
+ + \ No newline at end of file diff --git a/docs/api/html/settings-bond.html b/docs/api/html/settings-bond.html index 268ae38e..77da2c93 100644 --- a/docs/api/html/settings-bond.html +++ b/docs/api/html/settings-bond.html @@ -38,7 +38,7 @@ Properties
-

Table 50. 

+

Table 51. 

diff --git a/docs/api/html/settings-bridge-port.html b/docs/api/html/settings-bridge-port.html index 6eb7d93a..5c2aa4f7 100644 --- a/docs/api/html/settings-bridge-port.html +++ b/docs/api/html/settings-bridge-port.html @@ -38,7 +38,7 @@ Properties
-

Table 52. 

+

Table 53. 

diff --git a/docs/api/html/settings-bridge.html b/docs/api/html/settings-bridge.html index 5cee3c11..b19b3f0f 100644 --- a/docs/api/html/settings-bridge.html +++ b/docs/api/html/settings-bridge.html @@ -38,7 +38,7 @@ Properties
-

Table 51. 

+

Table 52. 

diff --git a/docs/api/html/settings-cdma.html b/docs/api/html/settings-cdma.html index a32fa537..fb29acc4 100644 --- a/docs/api/html/settings-cdma.html +++ b/docs/api/html/settings-cdma.html @@ -38,7 +38,7 @@ Properties
-

Table 53. 

+

Table 54. 

diff --git a/docs/api/html/settings-connection.html b/docs/api/html/settings-connection.html index 79025e4a..0756d597 100644 --- a/docs/api/html/settings-connection.html +++ b/docs/api/html/settings-connection.html @@ -38,7 +38,7 @@ Properties
-

Table 45. 

+

Table 46. 

@@ -63,13 +63,13 @@ - + - + @@ -84,6 +84,12 @@ + + + + + + diff --git a/docs/api/html/settings-dcb.html b/docs/api/html/settings-dcb.html index d3274cf1..784cff03 100644 --- a/docs/api/html/settings-dcb.html +++ b/docs/api/html/settings-dcb.html @@ -38,7 +38,7 @@ Properties
-

Table 54. 

+

Table 55. 

autoconnect
 
boolean
 
TRUE
Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles.Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles. 
autoconnect-priority
 
int32
 
0
The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority.The autoconnect priority in range -999 to 999. If the connection is set to autoconnect, connections with higher priority will be preferred. The higher number means higher priority. Defaults to 0. Note that this property only matters if there are more than one candidate profile to select for autoconnect. In case of equal priority, the profile used most recently is chosen. 
autoconnect-retries
Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0. 
dns-over-tls
int32
-1
Whether DNSOverTls (dns-over-tls) is enabled for the connection. DNSOverTls is a technology which uses TLS to encrypt dns traffic. The permitted values are: "yes" (2) use DNSOverTls and disabled fallback, "opportunistic" (1) use DNSOverTls but allow fallback to unencrypted resolution, "no" (0) don't ever use DNSOverTls. If unspecified "default" depends on the plugin used. Systemd-resolved uses global setting. This feature requires a plugin which supports DNSOverTls. Otherwise, the setting has no effect. One such plugin is dns-systemd-resolved.
gateway-ping-timeout
 
uint32
 
0
@@ -62,8 +62,8 @@ - - + + diff --git a/docs/api/html/settings-dummy.html b/docs/api/html/settings-dummy.html index 6bc0ab4d..d5c7d25c 100644 --- a/docs/api/html/settings-dummy.html +++ b/docs/api/html/settings-dummy.html @@ -38,7 +38,7 @@ Properties
-

Table 55. 

+

Table 56. 

app-fcoe-mode
 
string
"fabric"
The FCoE controller mode; either "fabric" (default) or "vn2vn".
The FCoE controller mode; either "fabric" or "vn2vn". Since 1.34, NULL is the default and means "fabric". Before 1.34, NULL was rejected as invalid and the default was "fabric".
 

 

 
app-fcoe-priority

 
diff --git a/docs/api/html/settings-ethtool.html b/docs/api/html/settings-ethtool.html
index adf9071e..011f8cb5 100644
--- a/docs/api/html/settings-ethtool.html
+++ b/docs/api/html/settings-ethtool.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 56. 

+
Table 57. 

 

 
 

 
diff --git a/docs/api/html/settings-generic.html b/docs/api/html/settings-generic.html
index cdc71b1c..2e03accd 100644
--- a/docs/api/html/settings-generic.html
+++ b/docs/api/html/settings-generic.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 57. 

+
Table 58. 

 

 
 

 
diff --git a/docs/api/html/settings-gsm.html b/docs/api/html/settings-gsm.html
index a48daf44..a0c4cca8 100644
--- a/docs/api/html/settings-gsm.html
+++ b/docs/api/html/settings-gsm.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 58. 

+
Table 59. 

 

 
 

 
diff --git a/docs/api/html/settings-hostname.html b/docs/api/html/settings-hostname.html
index 0caf2ce7..f93dd8f9 100644
--- a/docs/api/html/settings-hostname.html
+++ b/docs/api/html/settings-hostname.html
@@ -6,7 +6,7 @@
 
-
+
@@ -21,7 +21,7 @@
 
-
+

 
 

 
 
 
 
 
 
Home
 UpPrevPrev
 Next
 

 

@@ -34,11 +34,11 @@
 

 

 

-

+

             Properties
         

 

-
Table 93. 

+
Table 95. 

 
diff --git a/docs/api/html/settings-infiniband.html b/docs/api/html/settings-infiniband.html
index 702d1bf4..b14cc1c7 100644
--- a/docs/api/html/settings-infiniband.html
+++ b/docs/api/html/settings-infiniband.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 59. 

+
Table 60. 

 

 
 

 
diff --git a/docs/api/html/settings-ip-tunnel.html b/docs/api/html/settings-ip-tunnel.html
index 929ffa40..4a154d49 100644
--- a/docs/api/html/settings-ip-tunnel.html
+++ b/docs/api/html/settings-ip-tunnel.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 62. 

+
Table 63. 

 

 
 

 
diff --git a/docs/api/html/settings-ipv4.html b/docs/api/html/settings-ipv4.html
index 4f91166b..20cd3236 100644
--- a/docs/api/html/settings-ipv4.html
+++ b/docs/api/html/settings-ipv4.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 60. 

+
Table 61. 

 

 
 

 
diff --git a/docs/api/html/settings-ipv6.html b/docs/api/html/settings-ipv6.html
index 62a1be5a..af20a399 100644
--- a/docs/api/html/settings-ipv6.html
+++ b/docs/api/html/settings-ipv6.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 61. 

+
Table 62. 

 

 
 

 
diff --git a/docs/api/html/settings-macsec.html b/docs/api/html/settings-macsec.html
index ecc6f69f..de743ee4 100644
--- a/docs/api/html/settings-macsec.html
+++ b/docs/api/html/settings-macsec.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 63. 

+
Table 64. 

 

 
 

 
diff --git a/docs/api/html/settings-macvlan.html b/docs/api/html/settings-macvlan.html
index 3cf2fc00..b09ca148 100644
--- a/docs/api/html/settings-macvlan.html
+++ b/docs/api/html/settings-macvlan.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 64. 

+
Table 65. 

 

 
 

 
diff --git a/docs/api/html/settings-match.html b/docs/api/html/settings-match.html
index 2a326ed8..172d0694 100644
--- a/docs/api/html/settings-match.html
+++ b/docs/api/html/settings-match.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 65. 

+
Table 66. 

 

 
 

 
diff --git a/docs/api/html/settings-ovs-bridge.html b/docs/api/html/settings-ovs-bridge.html
index 29239f40..011e49bc 100644
--- a/docs/api/html/settings-ovs-bridge.html
+++ b/docs/api/html/settings-ovs-bridge.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 67. 

+
Table 68. 

 

 
 

 
diff --git a/docs/api/html/settings-ovs-dpdk.html b/docs/api/html/settings-ovs-dpdk.html
index a40d5fd0..cd91106d 100644
--- a/docs/api/html/settings-ovs-dpdk.html
+++ b/docs/api/html/settings-ovs-dpdk.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 68. 

+
Table 69. 

 

 
 

 
diff --git a/docs/api/html/settings-ovs-external-ids.html b/docs/api/html/settings-ovs-external-ids.html
index 0ec0c4e8..1a196728 100644
--- a/docs/api/html/settings-ovs-external-ids.html
+++ b/docs/api/html/settings-ovs-external-ids.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 94. 

+
Table 96. 

 
diff --git a/docs/api/html/settings-ovs-interface.html b/docs/api/html/settings-ovs-interface.html
index 71aff775..931527db 100644
--- a/docs/api/html/settings-ovs-interface.html
+++ b/docs/api/html/settings-ovs-interface.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 69. 

+
Table 70. 

 

 
 

 
diff --git a/docs/api/html/settings-ovs-patch.html b/docs/api/html/settings-ovs-patch.html
index 9fb817bb..c916043d 100644
--- a/docs/api/html/settings-ovs-patch.html
+++ b/docs/api/html/settings-ovs-patch.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 70. 

+
Table 71. 

 

 
 

 
diff --git a/docs/api/html/settings-ovs-port.html b/docs/api/html/settings-ovs-port.html
index 56f45834..2aa91ff7 100644
--- a/docs/api/html/settings-ovs-port.html
+++ b/docs/api/html/settings-ovs-port.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 71. 

+
Table 72. 

 

 
 

 
diff --git a/docs/api/html/settings-ppp.html b/docs/api/html/settings-ppp.html
index faff1d83..493cf752 100644
--- a/docs/api/html/settings-ppp.html
+++ b/docs/api/html/settings-ppp.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 72. 

+
Table 73. 

 

 
 

 
diff --git a/docs/api/html/settings-pppoe.html b/docs/api/html/settings-pppoe.html
index 339e0aa9..277dde3d 100644
--- a/docs/api/html/settings-pppoe.html
+++ b/docs/api/html/settings-pppoe.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 73. 

+
Table 74. 

 

 
 

 
diff --git a/docs/api/html/settings-proxy.html b/docs/api/html/settings-proxy.html
index 3cfe06f4..8c1104d3 100644
--- a/docs/api/html/settings-proxy.html
+++ b/docs/api/html/settings-proxy.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 74. 

+
Table 75. 

 

 
 

 
diff --git a/docs/api/html/settings-serial.html b/docs/api/html/settings-serial.html
index 5caaa483..ff473d40 100644
--- a/docs/api/html/settings-serial.html
+++ b/docs/api/html/settings-serial.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 75. 

+
Table 76. 

 

 
 

 
diff --git a/docs/api/html/settings-sriov.html b/docs/api/html/settings-sriov.html
index 0317c775..9f7fded6 100644
--- a/docs/api/html/settings-sriov.html
+++ b/docs/api/html/settings-sriov.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 76. 

+
Table 77. 

 

 
 

 
diff --git a/docs/api/html/settings-tc.html b/docs/api/html/settings-tc.html
index 68379633..ebcf0f23 100644
--- a/docs/api/html/settings-tc.html
+++ b/docs/api/html/settings-tc.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 77. 

+
Table 78. 

 

 
 

 
diff --git a/docs/api/html/settings-team-port.html b/docs/api/html/settings-team-port.html
index e493d426..7fe18f0a 100644
--- a/docs/api/html/settings-team-port.html
+++ b/docs/api/html/settings-team-port.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 79. 

+
Table 80. 

 

 
 

 
diff --git a/docs/api/html/settings-team.html b/docs/api/html/settings-team.html
index c4ae06b0..99cd91ee 100644
--- a/docs/api/html/settings-team.html
+++ b/docs/api/html/settings-team.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 78. 

+
Table 79. 

 

 
 

 
diff --git a/docs/api/html/settings-tun.html b/docs/api/html/settings-tun.html
index 20af9291..46e23d62 100644
--- a/docs/api/html/settings-tun.html
+++ b/docs/api/html/settings-tun.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 80. 

+
Table 81. 

 

 
 

 
diff --git a/docs/api/html/settings-user.html b/docs/api/html/settings-user.html
index a00fac44..33e64f03 100644
--- a/docs/api/html/settings-user.html
+++ b/docs/api/html/settings-user.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 81. 

+
Table 82. 

 

 
 

 
diff --git a/docs/api/html/settings-veth.html b/docs/api/html/settings-veth.html
index 761b4f72..d53121c9 100644
--- a/docs/api/html/settings-veth.html
+++ b/docs/api/html/settings-veth.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 95. 

+
Table 97. 

 
diff --git a/docs/api/html/settings-vlan.html b/docs/api/html/settings-vlan.html
index 33787e8a..be1e1d1f 100644
--- a/docs/api/html/settings-vlan.html
+++ b/docs/api/html/settings-vlan.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 82. 

+
Table 83. 

 

 
 

 
diff --git a/docs/api/html/settings-vpn.html b/docs/api/html/settings-vpn.html
index db059516..afd1ac72 100644
--- a/docs/api/html/settings-vpn.html
+++ b/docs/api/html/settings-vpn.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 83. 

+
Table 84. 

 

 
 

 
diff --git a/docs/api/html/settings-vrf.html b/docs/api/html/settings-vrf.html
index 839bf8c9..6c49c512 100644
--- a/docs/api/html/settings-vrf.html
+++ b/docs/api/html/settings-vrf.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 84. 

+
Table 85. 

 

 
 

 
diff --git a/docs/api/html/settings-vxlan.html b/docs/api/html/settings-vxlan.html
index 6da8eb52..a0ec0963 100644
--- a/docs/api/html/settings-vxlan.html
+++ b/docs/api/html/settings-vxlan.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 85. 

+
Table 86. 

 

 
 

 
diff --git a/docs/api/html/settings-wifi-p2p.html b/docs/api/html/settings-wifi-p2p.html
index dc9c2592..9fe0a90b 100644
--- a/docs/api/html/settings-wifi-p2p.html
+++ b/docs/api/html/settings-wifi-p2p.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 86. 

+
Table 87. 

 

 
 

 
diff --git a/docs/api/html/settings-wimax.html b/docs/api/html/settings-wimax.html
index ee0f1112..d733d7fd 100644
--- a/docs/api/html/settings-wimax.html
+++ b/docs/api/html/settings-wimax.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 87. 

+
Table 88. 

 

 
 

 
diff --git a/docs/api/html/settings-wireguard.html b/docs/api/html/settings-wireguard.html
index e632ffdf..01157792 100644
--- a/docs/api/html/settings-wireguard.html
+++ b/docs/api/html/settings-wireguard.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 89. 

+
Table 90. 

 

 
 

 
diff --git a/docs/api/html/settings-wpan.html b/docs/api/html/settings-wpan.html
index 6fdbaa22..b0e3b24b 100644
--- a/docs/api/html/settings-wpan.html
+++ b/docs/api/html/settings-wpan.html
@@ -7,7 +7,7 @@
 
-
+
@@ -22,7 +22,7 @@
 
-
+

 
 

 
 
 
 
 
Home
 Up
 PrevNextNext
 

 

 

@@ -38,7 +38,7 @@
             Properties
         
 

-
Table 92. 

+
Table 93. 

 
diff --git a/docs/api/html/style.css b/docs/api/html/style.css
index c2b3cf7b..c163abaa 100644
--- a/docs/api/html/style.css
+++ b/docs/api/html/style.css
@@ -456,9 +456,9 @@ acronym,abbr
 }
 
 pre { line-height: 125%; }
-td.linenos pre { color: #000000; background-color: #f0f0f0; padding-left: 5px; padding-right: 5px; }
-span.linenos { color: #000000; background-color: #f0f0f0; padding-left: 5px; padding-right: 5px; }
-td.linenos pre.special { color: #000000; background-color: #ffffc0; padding-left: 5px; padding-right: 5px; }
+td.linenos .normal { color: inherit; background-color: transparent; padding-left: 5px; padding-right: 5px; }
+span.linenos { color: inherit; background-color: transparent; padding-left: 5px; padding-right: 5px; }
+td.linenos .special { color: #000000; background-color: #ffffc0; padding-left: 5px; padding-right: 5px; }
 span.linenos.special { color: #000000; background-color: #ffffc0; padding-left: 5px; padding-right: 5px; }
 .hll { background-color: #ffffcc }
 .c { color: #408080; font-style: italic } /* Comment */
-- 
cgit 1.3.0-6-gf8a5