From 80ec1decc49c72efec2a8b87c06245c92c0ab807 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Thu, 11 Feb 2021 18:11:46 +0100 Subject: New upstream version 1.29.90 --- docs/api/html/NetworkManager.conf.html | 77 +- docs/api/html/NetworkManager.devhelp2 | 5 + docs/api/html/ch01.html | 9 + docs/api/html/index.html | 14 +- docs/api/html/ix01.html | 1570 ++++++++++---------- docs/api/html/manpages.html | 3 + docs/api/html/nm-cloud-setup.html | 269 ++++ docs/api/html/nm-dbus-types.html | 33 +- docs/api/html/nm-initrd-generator.html | 12 +- docs/api/html/nm-openvswitch.html | 26 +- docs/api/html/nm-settings-dbus.html | 113 +- docs/api/html/nm-settings-ifcfg-rh.html | 143 +- docs/api/html/nm-settings-nmcli.html | 108 +- docs/api/html/nm-vpn-dbus-types.html | 24 +- docs/api/html/nmcli.html | 48 +- docs/api/html/ref-settings.html | 9 + docs/api/html/secrets-flags.html | 4 +- docs/api/html/settings-6lowpan.html | 2 +- docs/api/html/settings-802-11-olpc-mesh.html | 2 +- .../html/settings-802-11-wireless-security.html | 4 +- docs/api/html/settings-802-11-wireless.html | 2 +- docs/api/html/settings-802-1x.html | 6 +- docs/api/html/settings-802-3-ethernet.html | 2 +- docs/api/html/settings-adsl.html | 2 +- docs/api/html/settings-bluetooth.html | 2 +- docs/api/html/settings-bond.html | 2 +- docs/api/html/settings-bridge-port.html | 2 +- docs/api/html/settings-bridge.html | 2 +- docs/api/html/settings-cdma.html | 2 +- docs/api/html/settings-connection.html | 2 +- docs/api/html/settings-dcb.html | 2 +- docs/api/html/settings-dummy.html | 2 +- docs/api/html/settings-ethtool.html | 2 +- docs/api/html/settings-generic.html | 2 +- docs/api/html/settings-gsm.html | 2 +- docs/api/html/settings-hostname.html | 89 ++ docs/api/html/settings-infiniband.html | 2 +- docs/api/html/settings-ip-tunnel.html | 2 +- docs/api/html/settings-ipv4.html | 6 +- docs/api/html/settings-ipv6.html | 4 +- docs/api/html/settings-macsec.html | 2 +- docs/api/html/settings-macvlan.html | 2 +- docs/api/html/settings-match.html | 2 +- docs/api/html/settings-ovs-bridge.html | 2 +- docs/api/html/settings-ovs-dpdk.html | 2 +- docs/api/html/settings-ovs-external-ids.html | 69 + docs/api/html/settings-ovs-interface.html | 2 +- docs/api/html/settings-ovs-patch.html | 2 +- docs/api/html/settings-ovs-port.html | 2 +- docs/api/html/settings-ppp.html | 2 +- docs/api/html/settings-pppoe.html | 2 +- docs/api/html/settings-proxy.html | 2 +- docs/api/html/settings-serial.html | 2 +- docs/api/html/settings-sriov.html | 2 +- docs/api/html/settings-tc.html | 2 +- docs/api/html/settings-team-port.html | 2 +- docs/api/html/settings-team.html | 2 +- docs/api/html/settings-tun.html | 2 +- docs/api/html/settings-user.html | 2 +- docs/api/html/settings-veth.html | 69 + docs/api/html/settings-vlan.html | 2 +- docs/api/html/settings-vpn.html | 2 +- docs/api/html/settings-vrf.html | 2 +- docs/api/html/settings-vxlan.html | 2 +- docs/api/html/settings-wifi-p2p.html | 2 +- docs/api/html/settings-wimax.html | 2 +- docs/api/html/settings-wireguard.html | 2 +- docs/api/html/settings-wpan.html | 6 +- 68 files changed, 1860 insertions(+), 946 deletions(-) create mode 100644 docs/api/html/nm-cloud-setup.html create mode 100644 docs/api/html/settings-hostname.html create mode 100644 docs/api/html/settings-ovs-external-ids.html create mode 100644 docs/api/html/settings-veth.html (limited to 'docs/api/html') diff --git a/docs/api/html/NetworkManager.conf.html b/docs/api/html/NetworkManager.conf.html index 6c8f1f8e..05250d17 100644 --- a/docs/api/html/NetworkManager.conf.html +++ b/docs/api/html/NetworkManager.conf.html @@ -268,18 +268,24 @@ no-auto-default=* this option. An hostname empty or equal to 'localhost', 'localhost6', 'localhost.localdomain' or 'localhost6.localdomain' is considered invalid.

-

default: NetworkManager will update the hostname - with the one provided via DHCP on the main connection (the one with a default - route). If not present, the hostname will be updated to the last one set - outside NetworkManager. If it is not valid, NetworkManager will try to recover - the hostname from the reverse lookup of the IP address of the main connection. - If this fails too, the hostname will be set to 'localhost.localdomain'. +

default: NetworkManager will update the + hostname with the one provided via DHCP or reverse DNS lookup of the + IP address on the connection with the default route or on any + connection with the property hostname.only-from-default set to + 'false'. Connections are considered in order of + increasing value of the hostname.priority + property. In case multiple connections have the same priority, + connections activated earlier are considered first. If no hostname can + be determined in such way, the hostname will be updated to the last + one set outside NetworkManager or to 'localhost.localdomain'.

-

dhcp: NetworkManager will update the transient hostname - only with information coming from DHCP. No fallback nor reverse lookup will be - performed, but when the dhcp connection providing the hostname is deactivated, - the hostname is reset to the last hostname set outside NetworkManager or - 'localhost' if none valid is there. +

dhcp: this is similar to + 'default', with the difference that after trying to + get the DHCP hostname, reverse DNS lookup is not done. Note that + selecting this option is equivalent to setting the property + 'hostname.from-dns-lookup' to + 'false' globally for all connections in + NetworkManager.conf.

none: NetworkManager will not manage the transient hostname and will never set it. @@ -616,6 +622,18 @@ unmanaged-devices=mac:00:22:68:1c:59:b1;mac:00:1E:65:30:D1:C4;interface-name:eth connection section

Specify default values for connections.

+

+ Such default values are only consulted if the corresponding per-connection property + explicitly allows for that. That means, all these properties correspond to + a property of the connection profile (for example connection.mud-url). + Only if the per-profile property is set to a special value that indicates to use the + default, the default value from NetworkManager.conf is consulted. It depends on the + property, which is the special value that indicates fallback to the default, but it + usually is something like empty, unset values or special numeric values like 0 or -1. + That means the effectively used value can first always be configured for each profile, + and these default values only matter if the per-profile values explicitly indicates + to use the default from NetworkManager.conf. +

Example:

@@ -626,13 +644,13 @@ ipv6.ip6-privacy=0

-

Supported Properties

+

Supported Properties

Not all properties can be overwritten, only the following properties are supported to have their default values configured (see nm-settings(5) for details). - A default value is only consulted if the corresponding per-connection value - explicitly allows for that. +

+

@@ -700,6 +718,22 @@ ipv6.ip6-privacy=0 +

hostname.from-dhcp

+ + + +

hostname.from-dns-lookup

+ + + +

hostname.only-from-default

+ + + +

hostname.priority

+ + +

infiniband.mtu

If configured explicitly to 0, the MTU is not reconfigured during device activation unless it is required due to IPv6 constraints. If left unspecified, a DHCP/IPv6 SLAAC provided value is used or the MTU is left unspecified on activation.

@@ -1053,6 +1087,21 @@ managed=1

+

wifi.iwd.autoconnect

+

+ If wifi.backend is iwd, setting this to + false forces IWD's autoconnect mechanism to be disabled for + this device and connections will only be initiated by NetworkManager whether + commaned by a client or automatically. Leaving it true (default) + stops NetworkManager from automatically initiating connections and allows + IWD to use its network ranking and scanning logic to decide the best networks + to autoconnect to next. Connections' autoconnect-priority, + autoconnect-retries settings will be ignored. Other settings + like permissions or multi-connect may interfere + with IWD connection attempts. +

+ +

sriov-num-vfs

Specify the number of virtual functions (VF) to enable diff --git a/docs/api/html/NetworkManager.devhelp2 b/docs/api/html/NetworkManager.devhelp2 index c2c30fb7..6c7e5d6c 100644 --- a/docs/api/html/NetworkManager.devhelp2 +++ b/docs/api/html/NetworkManager.devhelp2 @@ -13,6 +13,7 @@ + @@ -65,6 +66,9 @@ + + + @@ -649,6 +653,7 @@ + diff --git a/docs/api/html/ch01.html b/docs/api/html/ch01.html index 28fa8420..0715709a 100644 --- a/docs/api/html/ch01.html +++ b/docs/api/html/ch01.html @@ -167,6 +167,15 @@

wpan — IEEE 802.15.4 (WPAN) MAC Settings
+
+hostname — Hostname settings +
+
+ovs-external-ids — OVS External IDs Settings +
+
+veth — Veth Settings +
@@ -3983,7 +3998,7 @@

-

upon rollback, delete any new connection added after the checkpoint (Since: 1.6)

+

upon rollback, delete any new connection added after the checkpoint. Since: 1.6.

  @@ -3998,7 +4013,7 @@

-

upon rollback, disconnect any new device appeared after the checkpoint (Since: 1.6)

+

upon rollback, disconnect any new device appeared after the checkpoint. Since: 1.6.

  @@ -4013,7 +4028,7 @@

-

by default, creating a checkpoint fails if there are already existing checkoints that reference the same devices. With this flag, creation of such checkpoints is allowed, however, if an older checkpoint that references overlapping devices gets rolled back, it will automatically destroy this checkpoint during rollback. This allows to create several overlapping checkpoints in parallel, and rollback to them at will. With the special case that rolling back to an older checkpoint will invalidate all overlapping younger checkpoints. This opts-in that the checkpoint can be automatically destroyed by the rollback of an older checkpoint. (Since: 1.12)

+

by default, creating a checkpoint fails if there are already existing checkoints that reference the same devices. With this flag, creation of such checkpoints is allowed, however, if an older checkpoint that references overlapping devices gets rolled back, it will automatically destroy this checkpoint during rollback. This allows to create several overlapping checkpoints in parallel, and rollback to them at will. With the special case that rolling back to an older checkpoint will invalidate all overlapping younger checkpoints. This opts-in that the checkpoint can be automatically destroyed by the rollback of an older checkpoint. Since: 1.12.

  @@ -4188,7 +4203,7 @@

-

the profile was generated to represent an external configuration of a networking device. Since: 1.26

+

the profile was generated to represent an external configuration of a networking device. Since: 1.26.

  @@ -4328,7 +4343,7 @@

-

the lifetime of the activation is bound to the visibility of the connection profile, which in turn depends on "connection.permissions" and whether a session for the user exists. Since: 1.16

+

the lifetime of the activation is bound to the visibility of the connection profile, which in turn depends on "connection.permissions" and whether a session for the user exists. Since: 1.16.

  @@ -4343,7 +4358,7 @@

-

the active connection was generated to represent an external configuration of a networking device. Since: 1.26

+

the active connection was generated to represent an external configuration of a networking device. Since: 1.26.

  diff --git a/docs/api/html/nm-initrd-generator.html b/docs/api/html/nm-initrd-generator.html index 0eba7378..515ba4d0 100644 --- a/docs/api/html/nm-initrd-generator.html +++ b/docs/api/html/nm-initrd-generator.html @@ -7,7 +7,7 @@ - + @@ -17,7 +17,7 @@ Home Up Prev -Next +Next
@@ -68,6 +68,13 @@

The sysfs mount point.

+

+ -r | --run-config-dir + path +

+

Output directory for config files.

+ +

-s | --stdout

@@ -89,6 +96,7 @@ rd.peerdns rd.bootif rd.net.timeout.dhcp +rd.net.timeout.carrier BOOTIF

Please consult the dracut.cmdline(7) diff --git a/docs/api/html/nm-openvswitch.html b/docs/api/html/nm-openvswitch.html index a4f35d46..39878e90 100644 --- a/docs/api/html/nm-openvswitch.html +++ b/docs/api/html/nm-openvswitch.html @@ -6,7 +6,7 @@ - + @@ -16,7 +16,7 @@ Home Up -Prev +Prev Next

@@ -29,7 +29,7 @@
-

Overview

+

Overview

NetworkManager includes basic Open vSwitch support, good enough to be capable of setting up simple Open vSwitch configurations. It is not extensive and does not expose all functionality of Open vSwitch provides. @@ -64,7 +64,7 @@

-

Bridges

+

Bridges

Bridges are represented by connections of ovs-bridge type. Due to the limitations of OVSDB, "empty" Bridges (with no Ports) can't exist. @@ -74,7 +74,7 @@


-

Ports

+

Ports

Ports are represented by connections of ovs-port type. Due to the limitations of OVSDB, "empty" Ports (with no Interfaces) can't @@ -84,7 +84,7 @@


-

Interfaces

+

Interfaces

Interfaces are represented by a connections enslaved to a Port. The system interfaces (that have a corresponding Linux link) have a respective connection.type @@ -94,9 +94,9 @@

-

Examples

+

Examples

-

Example 18. Creating a Bridge with a single internal Interface

+

Example 18. Creating a Bridge with a single internal Interface

$ nmcli conn add type ovs-bridge conn.interface bridge0
 Connection 'ovs-bridge-bridge0' (d10fc64d-1d48-4394-a1b8-e1aea72f27d5) successfully added.
@@ -113,7 +113,7 @@ Connection 'ovs-interface-iface0' (3640d2a1-a2fd-4718-92f1-cffadb5b6cdc) success
 

-

Example 19. Adding a Linux interface to a Bridge

+

Example 19. Adding a Linux interface to a Bridge

$ nmcli conn add type ovs-port conn.interface port1 master bridge0
 Connection 'ovs-port-port1' (67d041eb-8e7b-4458-afee-a1d07c9c4552) successfully added.
@@ -124,7 +124,7 @@ Connection 'ovs-slave-eth0' (d459c45c-cf78-4c1c-b4b7-505e71379624) successfully
 

-

Example 20. Creating a VLAN

+

Example 20. Creating a VLAN

$ nmcli conn add type ovs-port conn.interface port2 master bridge0 ovs-port.tag 120
 Connection 'ovs-port-port2' (3994c093-4ef7-4549-a4fd-627b831c3cb8) successfully added.
@@ -135,7 +135,7 @@ Connection 'ovs-slave-eth1' (099be06e-71ad-484d-8d5a-fcadc5f207f5) successfully
 

-

Example 21. Creating a Bond

+

Example 21. Creating a Bond

$ nmcli conn add type ovs-port conn.interface bond0 master bridge0
 Connection 'ovs-port-bond0' (d154ebf9-e999-4e1b-a084-a3de53d25d8a) successfully added.
@@ -153,7 +153,7 @@ Connection 'ovs-slave-eth3' (8dedeecb-ed12-482b-b77a-24a4fb835136) successfully
 
-

Bugs

+

Bugs

  • Not all Open vSwitch capabilities are supported.

  • Open vSwitch devices don't expose many useful properties on D-Bus.

  • @@ -161,7 +161,7 @@ Connection 'ovs-slave-eth3' (8dedeecb-ed12-482b-b77a-24a4fb835136) successfully

    Probably many more.

-

See Also

+

See Also

RFC 7047: The Open vSwitch Database Management Protocol, ovs-vsctl(8), diff --git a/docs/api/html/nm-settings-dbus.html b/docs/api/html/nm-settings-dbus.html index 57fb4bcc..85f77f2f 100644 --- a/docs/api/html/nm-settings-dbus.html +++ b/docs/api/html/nm-settings-dbus.html @@ -512,14 +512,14 @@ phase2-auth string   -Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. +Specifies the allowed "phase 2" inner authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. For TTLS this property selects one of the supported non-EAP inner methods: "pap", "chap", "mschap", "mschapv2" while "phase2-autheap" selects an EAP inner method. For PEAP this selects an inner EAP method, one of: "gtc", "otp", "md5" and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. Both "phase2-auth" and "phase2-autheap" cannot be specified. phase2-autheap string   -Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. +Specifies the allowed "phase 2" inner EAP-based authentication method when TTLS is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. @@ -1531,7 +1531,7 @@ dhcp-client-id string   -A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin. +A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "ipv6-duid" uses the DUID from "ipv6.dhcp-duid" property as an RFC4361-compliant client identifier. As IAID it uses "ipv4.dhcp-iaid" and falls back to "ipv6.dhcp-iaid" if unset. The special value "duid" generates a RFC4361-compliant client identifier based on "ipv4.dhcp-iaid" and uses a DUID generated by hashing /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin. @@ -1601,7 +1601,7 @@ dns-options array of string   -Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. +Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added. @@ -1797,7 +1797,7 @@ dns-options array of string   -Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. +Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added. @@ -3901,7 +3901,7 @@ key-mgmt string   -Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security. +Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption), "wpa-eap" (WPA-Enterprise) or "wpa-eap-suite-b-192" (WPA3-Enterprise Suite B). This property must be set for any Wi-Fi connection that uses security. @@ -4076,6 +4076,107 @@


+

hostname setting

+

Hostname settings.

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+from-dhcpNMTernary (int32) Whether the system hostname can be determined from DHCP on this connection. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).
+from-dns-lookupNMTernary (int32) Whether the system hostname can be determined from reverse DNS lookup of addresses on this device. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).
+only-from-defaultNMTernary (int32) If set to NM_TERNARY_TRUE (1), NetworkManager attempts to get the hostname via DHCPv4/DHCPv6 or reverse DNS lookup on this device only when the device has the default route for the given address family (IPv4/IPv6). If set to NM_TERNARY_FALSE (0), the hostname can be set from this device even if it doesn't have the default route. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_FALSE (0).
+priorityint320The relative priority of this connection to determine the system hostname. A lower numerical value is better (higher priority). A connection with higher priority is considered before connections with lower priority. If the value is zero, it can be overridden by a global value from NetworkManager configuration. If the property doesn't have a value in the global configuration, the value is assumed to be 100. Negative values have the special effect of excluding other connections with a greater numerical priority value; so in presence of at least one negative priority, only connections with the lowest priority value will be used to determine the hostname.
+
+
+
+

ovs-external-ids setting

+

OVS External IDs Settings.

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+datadict of string to string{}A dictionary of key/value pairs with exernal-ids for OVS.
+
+
+
+

veth setting

+

Veth Settings.

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+peerstring This property specifies the peer interface name of the veth. This property is mandatory.
+
+
+

Secret flag types:

Each password or secret property in a setting has an associated flags property diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 6e0974c2..8b57a583 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -422,7 +422,7 @@ Allowed values: space-separated list of authentication flags nam IEEE_8021X_INNER_AUTH_METHODS(+)   -Inner non-EAP authentication methods. IEEE_8021X_INNER_AUTH_METHODS can contain values both for 'phase2-auth' and 'phase2-autheap' properties. +Inner non-EAP authentication methods for TTLS or the inner EAP authentication method for PEAP. IEEE_8021X_INNER_AUTH_METHODS can contain values both for 'phase2-auth' and 'phase2-autheap' properties. Example: IEEE_8021X_INNER_AUTH_METHODS=PAP @@ -1281,7 +1281,62 @@ Example: DCB_PG_UP2TC=01623701


-

Table 19. infiniband setting

+

Table 19. hostname setting

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
priorityHOSTNAME_PRIORITY(+) +missing variable means global value or 100hostname priority + +Example: HOSTNAME_PRIORITY=50
from-dhcpHOSTNAME_FROM_DHCP(+) +missing variable means global default or 1whether the system hostname can be determined from DHCP + +Example: HOSTNAME_FROM_DHCP=0,1
from-dhcpHOSTNAME_FROM_DNS_LOOKUP(+) +missing variable means global default or 1whether the system hostname can be determined from reverse DNS lookup + +Example: HOSTNAME_FROM_DNS_LOOKUP=0,1
only-best-deviceHOSTNAME_ONLY_FROM_DEFAULT(+) +missing variable means global default or 1whether the hostname can be determined only from devices with the default route + +Example: HOSTNAME_ONLY_FROM_DEFAULT=0,1
+
+
+

Table 20. infiniband setting

@@ -1336,7 +1391,7 @@ Example: PHYSDEV=ib0

-

Table 20. ipv4 setting

+

Table 21. ipv4 setting

@@ -1375,7 +1430,7 @@ Example: DNS1=1.2.3.4 DNS2=10.0.0.254 DNS3=8.8.8.8 - +
addressesIPADDR, PREFIX, IPADDR1, PREFIX1, ...IPADDR, PREFIX (NETMASK), IPADDR1, PREFIX1 (NETMASK1), ...   List of static IP addresses. @@ -1513,7 +1568,7 @@ Example: DHCP_VENDOR_CLASS_IDENTIFIER=foo

-

Table 21. ipv6 setting

+

Table 22. ipv6 setting

@@ -1696,7 +1751,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 22. match setting

+

Table 23. match setting

@@ -1721,7 +1776,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 23. ovs-bridge setting

+

Table 24. ovs-bridge setting

@@ -1739,7 +1794,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 24. ovs-dpdk setting

+

Table 25. ovs-dpdk setting

@@ -1757,7 +1812,25 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 25. ovs-interface setting

+

Table 26. ovs-external-ids setting

+
++++++ + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
+
+
+

Table 27. ovs-interface setting

@@ -1775,7 +1848,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 26. ovs-patch setting

+

Table 28. ovs-patch setting

@@ -1793,7 +1866,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 27. ovs-port setting

+

Table 29. ovs-port setting

@@ -1811,7 +1884,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 28. proxy setting

+

Table 30. proxy setting

@@ -1864,7 +1937,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac

-

Table 29. sriov setting

+

Table 31. sriov setting

@@ -1909,7 +1982,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1

-

Table 30. tc setting

+

Table 32. tc setting

@@ -1944,7 +2017,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 31. team-port setting

+

Table 33. team-port setting

@@ -1967,7 +2040,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 32. team setting

+

Table 34. team setting

@@ -1990,7 +2063,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 33. user setting

+

Table 35. user setting

@@ -2015,7 +2088,25 @@ Example: NM_USER_FOO__BAR=something

-

Table 34. vlan setting

+

Table 36. veth setting

+
++++++ + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
+
+
+

Table 37. vlan setting

@@ -2078,7 +2169,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 35. vrf setting

+

Table 38. vrf setting

@@ -2096,7 +2187,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 36. wifi-p2p setting

+

Table 39. wifi-p2p setting

@@ -2114,7 +2205,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 37. 802-3-ethernet setting

+

Table 40. 802-3-ethernet setting

@@ -2215,7 +2306,7 @@ Allowed values: "qeth", "lcs" or "ctc"

-

Table 38. wireguard setting

+

Table 41. wireguard setting

@@ -2233,7 +2324,7 @@ Allowed values: "qeth", "lcs" or "ctc"

-

Table 39. 802-11-wireless-security setting

+

Table 42. 802-11-wireless-security setting

@@ -2255,7 +2346,7 @@ Allowed values: "qeth", "lcs" or "ctc" +Allowed values: IEEE8021X, WPA-PSK, WPA-EAP, WPA-EAP-SUITE-B-192 @@ -2415,7 +2506,7 @@ Allowed values: default, disable, optional, required
  Key management menthod. -Allowed values: IEEE8021X, WPA-PSK, WPA-EAP
wep-tx-keyidx

-

Table 40. 802-11-wireless setting

+

Table 43. 802-11-wireless setting

@@ -2572,7 +2663,7 @@ Allowed values: "yes", "no"

-

Table 41. wpan setting

+

Table 44. wpan setting

diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html index a38304aa..e59968ad 100644 --- a/docs/api/html/nm-settings-nmcli.html +++ b/docs/api/html/nm-settings-nmcli.html @@ -541,7 +541,7 @@ @@ -549,7 +549,7 @@ @@ -1511,6 +1511,10 @@ + + + + @@ -1531,6 +1535,14 @@ + + + + + + + + @@ -1563,6 +1575,10 @@ + + + + @@ -1611,6 +1627,10 @@ + + + + @@ -1659,6 +1679,10 @@ + + + + @@ -1935,7 +1959,7 @@ @@ -2015,7 +2039,7 @@ @@ -2207,7 +2231,7 @@ @@ -4431,7 +4455,7 @@ @@ -4641,6 +4665,78 @@
+

hostname setting

+

Hostname settings.

+

+ Properties: +

+

phase2-auth

-

Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.

+

Specifies the allowed "phase 2" inner authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. For TTLS this property selects one of the supported non-EAP inner methods: "pap", "chap", "mschap", "mschapv2" while "phase2-autheap" selects an EAP inner method. For PEAP this selects an inner EAP method, one of: "gtc", "otp", "md5" and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. Both "phase2-auth" and "phase2-autheap" cannot be specified.

Format: string

phase2-autheap

-

Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.

+

Specifies the allowed "phase 2" inner EAP-based authentication method when TTLS is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.

Format: string

feature-macsec-hw-offload

feature-ntuple

feature-rx-gro-list

feature-rx-udp-gro-forwarding

feature-rx-udp_tunnel-port-offload

feature-tls-hw-rx-offload

feature-tls-hw-tx-offload

feature-tx-gso-list

feature-tx-gso-partial

feature-tx-tunnel-remcsum-segmentation

feature-tx-udp-segmentation

dhcp-client-id

-

A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.

+

A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "ipv6-duid" uses the DUID from "ipv6.dhcp-duid" property as an RFC4361-compliant client identifier. As IAID it uses "ipv4.dhcp-iaid" and falls back to "ipv6.dhcp-iaid" if unset. The special value "duid" generates a RFC4361-compliant client identifier based on "ipv4.dhcp-iaid" and uses a DUID generated by hashing /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.

Format: string

dns-options

-

Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.

+

Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.

Format: array of string

dns-options

-

Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.

+

Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.

Format: array of string

key-mgmt

-

Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.

+

Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption), "wpa-eap" (WPA-Enterprise) or "wpa-eap-suite-b-192" (WPA3-Enterprise Suite B). This property must be set for any Wi-Fi connection that uses security.

Format: string

++++ + + + + + + + + + + + + + + + + + + +

from-dhcp

+

Whether the system hostname can be determined from DHCP on this connection. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).

+

+ Format: NMTernary (int32)

+

from-dns-lookup

+

Whether the system hostname can be determined from reverse DNS lookup of addresses on this device. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).

+

+ Format: NMTernary (int32)

+

only-from-default

+

If set to NM_TERNARY_TRUE (1), NetworkManager attempts to get the hostname via DHCPv4/DHCPv6 or reverse DNS lookup on this device only when the device has the default route for the given address family (IPv4/IPv6). If set to NM_TERNARY_FALSE (0), the hostname can be set from this device even if it doesn't have the default route. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_FALSE (0).

+

+ Format: NMTernary (int32)

+

priority

+

The relative priority of this connection to determine the system hostname. A lower numerical value is better (higher priority). A connection with higher priority is considered before connections with lower priority. If the value is zero, it can be overridden by a global value from NetworkManager configuration. If the property doesn't have a value in the global configuration, the value is assumed to be 100. Negative values have the special effect of excluding other connections with a greater numerical priority value; so in presence of at least one negative priority, only connections with the lowest priority value will be used to determine the hostname.

+

+ Format: int32

+
+
+
+
+

veth setting

+

Veth Settings.

+

+ Properties: +

+
++++ + + + + +

peer

+

+ Alias: peer

+

This property specifies the peer interface name of the veth. This property is mandatory.

+

+ Format: string

+
+
+
+

Secret flag types:

Each password or secret property in a setting has an associated flags property diff --git a/docs/api/html/nm-vpn-dbus-types.html b/docs/api/html/nm-vpn-dbus-types.html index 8c69cbeb..31c1d323 100644 --- a/docs/api/html/nm-vpn-dbus-types.html +++ b/docs/api/html/nm-vpn-dbus-types.html @@ -311,7 +311,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN

+

= 0

@@ -326,7 +326,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_NONE

+

= 1

@@ -341,7 +341,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED

+

= 2

@@ -356,7 +356,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED

+

= 3

@@ -371,7 +371,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED

+

= 4

@@ -386,7 +386,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID

+

= 5

@@ -401,7 +401,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT

+

= 6

@@ -416,7 +416,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT

+

= 7

@@ -431,7 +431,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED

+

= 8

@@ -446,7 +446,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS

+

= 9

@@ -461,7 +461,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED

+

= 10

@@ -476,7 +476,7 @@

-

= NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED

+

= 11

diff --git a/docs/api/html/nmcli.html b/docs/api/html/nmcli.html index 2f79c151..bcb6657b 100644 --- a/docs/api/html/nmcli.html +++ b/docs/api/html/nmcli.html @@ -653,29 +653,43 @@ connection.type property (or use the type alias) to one of known NetworkManager connection types:

    -
  • ethernet

  • -
  • wifi

  • -
  • wimax

  • -
  • pppoe

  • -
  • gsm

  • -
  • cdma

  • -
  • infiniband

  • +
  • 6lowpan

  • +
  • 802-11-olpc-mesh (alias olpc-mesh)

  • +
  • 802-11-wireless (alias wifi)

  • +
  • 802-3-ethernet (alias ethernet)

  • +
  • adsl

  • bluetooth

  • -
  • vlan

  • bond

  • -
  • bond-slave

  • -
  • team

  • -
  • team-slave

  • +
  • bond-slave (deprecated for ethernet with master)

  • bridge

  • -
  • bridge-slave

  • -
  • vpn

  • -
  • olpc-mesh

  • -
  • adsl

  • -
  • tun

  • +
  • bridge-slave (deprecated for ethernet with master)

  • +
  • cdma

  • +
  • dummy

  • +
  • generic

  • +
  • gsm

  • +
  • infiniband

  • ip-tunnel

  • +
  • macsec

  • macvlan

  • +
  • olpc-mesh

  • +
  • ovs-bridge

  • +
  • ovs-dpdk

  • +
  • ovs-interface

  • +
  • ovs-patch

  • +
  • ovs-port

  • +
  • pppoe

  • +
  • team

  • +
  • team-slave (deprecated for ethernet with master)

  • +
  • tun

  • +
  • veth

  • +
  • vlan

  • +
  • vpn

  • +
  • vrf

  • vxlan

  • -
  • dummy

  • +
  • wifi-p2p

  • +
  • wimax

  • +
  • wireguard

  • +
  • wpan

The most typical uses are described in the Examples section.

Aside from the properties and values two special options are accepted:

diff --git a/docs/api/html/ref-settings.html b/docs/api/html/ref-settings.html index 466ba754..feefbecc 100644 --- a/docs/api/html/ref-settings.html +++ b/docs/api/html/ref-settings.html @@ -171,6 +171,15 @@
wpan — IEEE 802.15.4 (WPAN) MAC Settings
+
+hostname — Hostname settings +
+
+ovs-external-ids — OVS External IDs Settings +
+
+veth — Veth Settings +
Secret flag types
diff --git a/docs/api/html/secrets-flags.html b/docs/api/html/secrets-flags.html index 8e422d3d..66c07cef 100644 --- a/docs/api/html/secrets-flags.html +++ b/docs/api/html/secrets-flags.html @@ -6,7 +6,7 @@ - + @@ -16,7 +16,7 @@ Home Up -Prev +Prev Next
diff --git a/docs/api/html/settings-6lowpan.html b/docs/api/html/settings-6lowpan.html index ff03902b..29f8401e 100644 --- a/docs/api/html/settings-6lowpan.html +++ b/docs/api/html/settings-6lowpan.html @@ -38,7 +38,7 @@ Properties
-

Table 43. 

+

Table 46. 

diff --git a/docs/api/html/settings-802-11-olpc-mesh.html b/docs/api/html/settings-802-11-olpc-mesh.html index e98fd8d6..a9d98183 100644 --- a/docs/api/html/settings-802-11-olpc-mesh.html +++ b/docs/api/html/settings-802-11-olpc-mesh.html @@ -38,7 +38,7 @@ Properties
-

Table 63. 

+

Table 66. 

diff --git a/docs/api/html/settings-802-11-wireless-security.html b/docs/api/html/settings-802-11-wireless-security.html index 25539dec..48cddf46 100644 --- a/docs/api/html/settings-802-11-wireless-security.html +++ b/docs/api/html/settings-802-11-wireless-security.html @@ -38,7 +38,7 @@ Properties
-

Table 88. 

+

Table 91. 

@@ -75,7 +75,7 @@ - + diff --git a/docs/api/html/settings-802-11-wireless.html b/docs/api/html/settings-802-11-wireless.html index 2a011465..b7184301 100644 --- a/docs/api/html/settings-802-11-wireless.html +++ b/docs/api/html/settings-802-11-wireless.html @@ -38,7 +38,7 @@ Properties
-

Table 87. 

+

Table 90. 

key-mgmt
string
Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption), "wpa-eap" (WPA-Enterprise) or "wpa-eap-suite-b-192" (WPA3-Enterprise Suite B). This property must be set for any Wi-Fi connection that uses security.
leap-password
diff --git a/docs/api/html/settings-802-1x.html b/docs/api/html/settings-802-1x.html index 449bcda6..146bd354 100644 --- a/docs/api/html/settings-802-1x.html +++ b/docs/api/html/settings-802-1x.html @@ -38,7 +38,7 @@ Properties
-

Table 44. 

+

Table 47. 

@@ -207,13 +207,13 @@ - + - + diff --git a/docs/api/html/settings-802-3-ethernet.html b/docs/api/html/settings-802-3-ethernet.html index b5a1ec53..fb828bf0 100644 --- a/docs/api/html/settings-802-3-ethernet.html +++ b/docs/api/html/settings-802-3-ethernet.html @@ -38,7 +38,7 @@ Properties
-

Table 85. 

+

Table 88. 

phase2-auth
string
Specifies the allowed "phase 2" inner non-EAP authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized non-EAP "phase 2" methods are "pap", "chap", "mschap", "mschapv2", "gtc", "otp", "md5", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.Specifies the allowed "phase 2" inner authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. For TTLS this property selects one of the supported non-EAP inner methods: "pap", "chap", "mschap", "mschapv2" while "phase2-autheap" selects an EAP inner method. For PEAP this selects an inner EAP method, one of: "gtc", "otp", "md5" and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details. Both "phase2-auth" and "phase2-autheap" cannot be specified.
phase2-autheap
string
Specifies the allowed "phase 2" inner EAP-based authentication method when an EAP method that uses an inner TLS tunnel is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.Specifies the allowed "phase 2" inner EAP-based authentication method when TTLS is specified in the "eap" property. Recognized EAP-based "phase 2" methods are "md5", "mschapv2", "otp", "gtc", and "tls". Each "phase 2" inner method requires specific parameters for successful authentication; see the wpa_supplicant documentation for more details.
phase2-ca-cert
diff --git a/docs/api/html/settings-adsl.html b/docs/api/html/settings-adsl.html index 68d997e7..a861bf93 100644 --- a/docs/api/html/settings-adsl.html +++ b/docs/api/html/settings-adsl.html @@ -38,7 +38,7 @@ Properties
-

Table 45. 

+

Table 48. 

diff --git a/docs/api/html/settings-bluetooth.html b/docs/api/html/settings-bluetooth.html index 47983d3e..02dc2e13 100644 --- a/docs/api/html/settings-bluetooth.html +++ b/docs/api/html/settings-bluetooth.html @@ -38,7 +38,7 @@ Properties
-

Table 46. 

+

Table 49. 

diff --git a/docs/api/html/settings-bond.html b/docs/api/html/settings-bond.html index 70f978be..6c5bc7d9 100644 --- a/docs/api/html/settings-bond.html +++ b/docs/api/html/settings-bond.html @@ -38,7 +38,7 @@ Properties
-

Table 47. 

+

Table 50. 

diff --git a/docs/api/html/settings-bridge-port.html b/docs/api/html/settings-bridge-port.html index 8dbb3a16..7842fdb4 100644 --- a/docs/api/html/settings-bridge-port.html +++ b/docs/api/html/settings-bridge-port.html @@ -38,7 +38,7 @@ Properties
-

Table 49. 

+

Table 52. 

diff --git a/docs/api/html/settings-bridge.html b/docs/api/html/settings-bridge.html index d782efbc..92e1decb 100644 --- a/docs/api/html/settings-bridge.html +++ b/docs/api/html/settings-bridge.html @@ -38,7 +38,7 @@ Properties
-

Table 48. 

+

Table 51. 

diff --git a/docs/api/html/settings-cdma.html b/docs/api/html/settings-cdma.html index 8725e380..2c664483 100644 --- a/docs/api/html/settings-cdma.html +++ b/docs/api/html/settings-cdma.html @@ -38,7 +38,7 @@ Properties
-

Table 50. 

+

Table 53. 

diff --git a/docs/api/html/settings-connection.html b/docs/api/html/settings-connection.html index 40cb5ad8..3c57ca0a 100644 --- a/docs/api/html/settings-connection.html +++ b/docs/api/html/settings-connection.html @@ -38,7 +38,7 @@ Properties
-

Table 42. 

+

Table 45. 

diff --git a/docs/api/html/settings-dcb.html b/docs/api/html/settings-dcb.html index d650967d..b7319d6f 100644 --- a/docs/api/html/settings-dcb.html +++ b/docs/api/html/settings-dcb.html @@ -38,7 +38,7 @@ Properties
-

Table 51. 

+

Table 54. 

diff --git a/docs/api/html/settings-dummy.html b/docs/api/html/settings-dummy.html index 427baa64..403c68b4 100644 --- a/docs/api/html/settings-dummy.html +++ b/docs/api/html/settings-dummy.html @@ -38,7 +38,7 @@ Properties
-

Table 52. 

+

Table 55. 

diff --git a/docs/api/html/settings-ethtool.html b/docs/api/html/settings-ethtool.html index 31ec4dd4..0a6033b9 100644 --- a/docs/api/html/settings-ethtool.html +++ b/docs/api/html/settings-ethtool.html @@ -38,7 +38,7 @@ Properties
-

Table 53. 

+

Table 56. 

diff --git a/docs/api/html/settings-generic.html b/docs/api/html/settings-generic.html index 47e14585..ad8cd088 100644 --- a/docs/api/html/settings-generic.html +++ b/docs/api/html/settings-generic.html @@ -38,7 +38,7 @@ Properties
-

Table 54. 

+

Table 57. 

diff --git a/docs/api/html/settings-gsm.html b/docs/api/html/settings-gsm.html index b95beacf..8e97b6e0 100644 --- a/docs/api/html/settings-gsm.html +++ b/docs/api/html/settings-gsm.html @@ -38,7 +38,7 @@ Properties
-

Table 55. 

+

Table 58. 

diff --git a/docs/api/html/settings-hostname.html b/docs/api/html/settings-hostname.html new file mode 100644 index 00000000..0a4eddcd --- /dev/null +++ b/docs/api/html/settings-hostname.html @@ -0,0 +1,89 @@ + + + + +hostname: NetworkManager Reference Manual + + + + + + + + + +
+ + + + + + +
+
+
+ + +
+

hostname

+

hostname — Hostname settings

+
+
+

+ Properties +

+
+

Table 93. 

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
from-dhcp
NMTernary (int32)
Whether the system hostname can be determined from DHCP on this connection. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).
from-dns-lookup
NMTernary (int32)
Whether the system hostname can be determined from reverse DNS lookup of addresses on this device. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).
only-from-default
NMTernary (int32)
If set to NM_TERNARY_TRUE (1), NetworkManager attempts to get the hostname via DHCPv4/DHCPv6 or reverse DNS lookup on this device only when the device has the default route for the given address family (IPv4/IPv6). If set to NM_TERNARY_FALSE (0), the hostname can be set from this device even if it doesn't have the default route. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_FALSE (0).
priority
int32
0
The relative priority of this connection to determine the system hostname. A lower numerical value is better (higher priority). A connection with higher priority is considered before connections with lower priority. If the value is zero, it can be overridden by a global value from NetworkManager configuration. If the property doesn't have a value in the global configuration, the value is assumed to be 100. Negative values have the special effect of excluding other connections with a greater numerical priority value; so in presence of at least one negative priority, only connections with the lowest priority value will be used to determine the hostname.
+
+


+
+
+ + + \ No newline at end of file diff --git a/docs/api/html/settings-infiniband.html b/docs/api/html/settings-infiniband.html index 56a7c2a6..39a50043 100644 --- a/docs/api/html/settings-infiniband.html +++ b/docs/api/html/settings-infiniband.html @@ -38,7 +38,7 @@ Properties
-

Table 56. 

+

Table 59. 

diff --git a/docs/api/html/settings-ip-tunnel.html b/docs/api/html/settings-ip-tunnel.html index dfbc5640..e0922205 100644 --- a/docs/api/html/settings-ip-tunnel.html +++ b/docs/api/html/settings-ip-tunnel.html @@ -38,7 +38,7 @@ Properties
-

Table 59. 

+

Table 62. 

diff --git a/docs/api/html/settings-ipv4.html b/docs/api/html/settings-ipv4.html index 72cd55cd..63ef91f4 100644 --- a/docs/api/html/settings-ipv4.html +++ b/docs/api/html/settings-ipv4.html @@ -38,7 +38,7 @@ Properties
-

Table 57. 

+

Table 60. 

@@ -75,7 +75,7 @@ - + @@ -135,7 +135,7 @@ - + diff --git a/docs/api/html/settings-ipv6.html b/docs/api/html/settings-ipv6.html index eab52cee..3c11795e 100644 --- a/docs/api/html/settings-ipv6.html +++ b/docs/api/html/settings-ipv6.html @@ -38,7 +38,7 @@ Properties
-

Table 58. 

+

Table 61. 

dhcp-client-id
string
A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "ipv6-duid" uses the DUID from "ipv6.dhcp-duid" property as an RFC4361-compliant client identifier. As IAID it uses "ipv4.dhcp-iaid" and falls back to "ipv6.dhcp-iaid" if unset. The special value "duid" generates a RFC4361-compliant client identifier based on "ipv4.dhcp-iaid" and uses a DUID generated by hashing /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.
dhcp-fqdn
dns-options
array of string
Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.
dns-priority
@@ -129,7 +129,7 @@ - + diff --git a/docs/api/html/settings-macsec.html b/docs/api/html/settings-macsec.html index 0f3db8c9..3baaf035 100644 --- a/docs/api/html/settings-macsec.html +++ b/docs/api/html/settings-macsec.html @@ -38,7 +38,7 @@ Properties
-

Table 60. 

+

Table 63. 

dns-options
array of string
Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled.Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are "attempts", "debug", "edns0", "inet6", "ip6-bytestring", "ip6-dotint", "ndots", "no-check-names", "no-ip6-dotint", "no-reload", "no-tld-query", "rotate", "single-request", "single-request-reopen", "timeout", "trust-ad", "use-vc". The "trust-ad" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have "trust-ad" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then "edns0" and "trust-ad" are automatically added.
dns-priority
diff --git a/docs/api/html/settings-macvlan.html b/docs/api/html/settings-macvlan.html index 639b0feb..cf6f9f8c 100644 --- a/docs/api/html/settings-macvlan.html +++ b/docs/api/html/settings-macvlan.html @@ -38,7 +38,7 @@ Properties
-

Table 61. 

+

Table 64. 

diff --git a/docs/api/html/settings-match.html b/docs/api/html/settings-match.html index 34f62df0..3c79f2a0 100644 --- a/docs/api/html/settings-match.html +++ b/docs/api/html/settings-match.html @@ -38,7 +38,7 @@ Properties
-

Table 62. 

+

Table 65. 

diff --git a/docs/api/html/settings-ovs-bridge.html b/docs/api/html/settings-ovs-bridge.html index 570d022b..a30bc7e5 100644 --- a/docs/api/html/settings-ovs-bridge.html +++ b/docs/api/html/settings-ovs-bridge.html @@ -38,7 +38,7 @@ Properties
-

Table 64. 

+

Table 67. 

diff --git a/docs/api/html/settings-ovs-dpdk.html b/docs/api/html/settings-ovs-dpdk.html index a0a36838..00c58825 100644 --- a/docs/api/html/settings-ovs-dpdk.html +++ b/docs/api/html/settings-ovs-dpdk.html @@ -38,7 +38,7 @@ Properties
-

Table 65. 

+

Table 68. 

diff --git a/docs/api/html/settings-ovs-external-ids.html b/docs/api/html/settings-ovs-external-ids.html new file mode 100644 index 00000000..feaafcb9 --- /dev/null +++ b/docs/api/html/settings-ovs-external-ids.html @@ -0,0 +1,69 @@ + + + + +ovs-external-ids: NetworkManager Reference Manual + + + + + + + + + +
+ + + + + + +
+
+
+ + +
+

ovs-external-ids

+

ovs-external-ids — OVS External IDs Settings

+
+
+

+ Properties +

+
+

Table 94. 

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
data
dict of string to string
{}
A dictionary of key/value pairs with exernal-ids for OVS.
+
+


+
+
+ + + \ No newline at end of file diff --git a/docs/api/html/settings-ovs-interface.html b/docs/api/html/settings-ovs-interface.html index 7e1975a7..8c842abb 100644 --- a/docs/api/html/settings-ovs-interface.html +++ b/docs/api/html/settings-ovs-interface.html @@ -38,7 +38,7 @@ Properties
-

Table 66. 

+

Table 69. 

diff --git a/docs/api/html/settings-ovs-patch.html b/docs/api/html/settings-ovs-patch.html index 9d292786..3dddfa99 100644 --- a/docs/api/html/settings-ovs-patch.html +++ b/docs/api/html/settings-ovs-patch.html @@ -38,7 +38,7 @@ Properties
-

Table 67. 

+

Table 70. 

diff --git a/docs/api/html/settings-ovs-port.html b/docs/api/html/settings-ovs-port.html index f1d40c33..7eac441d 100644 --- a/docs/api/html/settings-ovs-port.html +++ b/docs/api/html/settings-ovs-port.html @@ -38,7 +38,7 @@ Properties
-

Table 68. 

+

Table 71. 

diff --git a/docs/api/html/settings-ppp.html b/docs/api/html/settings-ppp.html index 05477617..30b845b7 100644 --- a/docs/api/html/settings-ppp.html +++ b/docs/api/html/settings-ppp.html @@ -38,7 +38,7 @@ Properties
-

Table 69. 

+

Table 72. 

diff --git a/docs/api/html/settings-pppoe.html b/docs/api/html/settings-pppoe.html index d51def48..f8ba5309 100644 --- a/docs/api/html/settings-pppoe.html +++ b/docs/api/html/settings-pppoe.html @@ -38,7 +38,7 @@ Properties
-

Table 70. 

+

Table 73. 

diff --git a/docs/api/html/settings-proxy.html b/docs/api/html/settings-proxy.html index ddb89624..cb591d13 100644 --- a/docs/api/html/settings-proxy.html +++ b/docs/api/html/settings-proxy.html @@ -38,7 +38,7 @@ Properties
-

Table 71. 

+

Table 74. 

diff --git a/docs/api/html/settings-serial.html b/docs/api/html/settings-serial.html index 5348aaa6..50f3877e 100644 --- a/docs/api/html/settings-serial.html +++ b/docs/api/html/settings-serial.html @@ -38,7 +38,7 @@ Properties
-

Table 72. 

+

Table 75. 

diff --git a/docs/api/html/settings-sriov.html b/docs/api/html/settings-sriov.html index b046a8fd..34dc54b9 100644 --- a/docs/api/html/settings-sriov.html +++ b/docs/api/html/settings-sriov.html @@ -38,7 +38,7 @@ Properties
-

Table 73. 

+

Table 76. 

diff --git a/docs/api/html/settings-tc.html b/docs/api/html/settings-tc.html index 9232fff8..e57f62aa 100644 --- a/docs/api/html/settings-tc.html +++ b/docs/api/html/settings-tc.html @@ -38,7 +38,7 @@ Properties
-

Table 74. 

+

Table 77. 

diff --git a/docs/api/html/settings-team-port.html b/docs/api/html/settings-team-port.html index a9d492b5..0bc10236 100644 --- a/docs/api/html/settings-team-port.html +++ b/docs/api/html/settings-team-port.html @@ -38,7 +38,7 @@ Properties
-

Table 76. 

+

Table 79. 

diff --git a/docs/api/html/settings-team.html b/docs/api/html/settings-team.html index 762844b9..3b9e94ba 100644 --- a/docs/api/html/settings-team.html +++ b/docs/api/html/settings-team.html @@ -38,7 +38,7 @@ Properties
-

Table 75. 

+

Table 78. 

diff --git a/docs/api/html/settings-tun.html b/docs/api/html/settings-tun.html index 38d11ec2..1b4cfd67 100644 --- a/docs/api/html/settings-tun.html +++ b/docs/api/html/settings-tun.html @@ -38,7 +38,7 @@ Properties
-

Table 77. 

+

Table 80. 

diff --git a/docs/api/html/settings-user.html b/docs/api/html/settings-user.html index 6926b0ad..39d7be24 100644 --- a/docs/api/html/settings-user.html +++ b/docs/api/html/settings-user.html @@ -38,7 +38,7 @@ Properties
-

Table 78. 

+

Table 81. 

diff --git a/docs/api/html/settings-veth.html b/docs/api/html/settings-veth.html new file mode 100644 index 00000000..f0f7c5ac --- /dev/null +++ b/docs/api/html/settings-veth.html @@ -0,0 +1,69 @@ + + + + +veth: NetworkManager Reference Manual + + + + + + + + + +
+ + + + + + +
+
+
+ + +
+

veth

+

veth — Veth Settings

+
+
+

+ Properties +

+
+

Table 95. 

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
peer
string
This property specifies the peer interface name of the veth. This property is mandatory.
+
+


+
+
+ + + \ No newline at end of file diff --git a/docs/api/html/settings-vlan.html b/docs/api/html/settings-vlan.html index a017f607..82296a47 100644 --- a/docs/api/html/settings-vlan.html +++ b/docs/api/html/settings-vlan.html @@ -38,7 +38,7 @@ Properties
-

Table 79. 

+

Table 82. 

diff --git a/docs/api/html/settings-vpn.html b/docs/api/html/settings-vpn.html index ba447d12..bad0a84e 100644 --- a/docs/api/html/settings-vpn.html +++ b/docs/api/html/settings-vpn.html @@ -38,7 +38,7 @@ Properties
-

Table 80. 

+

Table 83. 

diff --git a/docs/api/html/settings-vrf.html b/docs/api/html/settings-vrf.html index 89bfbe10..f909e887 100644 --- a/docs/api/html/settings-vrf.html +++ b/docs/api/html/settings-vrf.html @@ -38,7 +38,7 @@ Properties
-

Table 81. 

+

Table 84. 

diff --git a/docs/api/html/settings-vxlan.html b/docs/api/html/settings-vxlan.html index 80615cce..91956202 100644 --- a/docs/api/html/settings-vxlan.html +++ b/docs/api/html/settings-vxlan.html @@ -38,7 +38,7 @@ Properties
-

Table 82. 

+

Table 85. 

diff --git a/docs/api/html/settings-wifi-p2p.html b/docs/api/html/settings-wifi-p2p.html index bbb21c11..e1a0578e 100644 --- a/docs/api/html/settings-wifi-p2p.html +++ b/docs/api/html/settings-wifi-p2p.html @@ -38,7 +38,7 @@ Properties
-

Table 83. 

+

Table 86. 

diff --git a/docs/api/html/settings-wimax.html b/docs/api/html/settings-wimax.html index f9edd5db..993ca964 100644 --- a/docs/api/html/settings-wimax.html +++ b/docs/api/html/settings-wimax.html @@ -38,7 +38,7 @@ Properties
-

Table 84. 

+

Table 87. 

diff --git a/docs/api/html/settings-wireguard.html b/docs/api/html/settings-wireguard.html index f0f198c0..01f20f6a 100644 --- a/docs/api/html/settings-wireguard.html +++ b/docs/api/html/settings-wireguard.html @@ -38,7 +38,7 @@ Properties
-

Table 86. 

+

Table 89. 

diff --git a/docs/api/html/settings-wpan.html b/docs/api/html/settings-wpan.html index a0d4b47f..6475e04f 100644 --- a/docs/api/html/settings-wpan.html +++ b/docs/api/html/settings-wpan.html @@ -7,7 +7,7 @@ - + @@ -22,7 +22,7 @@ - +
Home Up PrevNextNext
@@ -38,7 +38,7 @@ Properties
-

Table 89. 

+

Table 92. 

-- cgit 1.3.0-6-gf8a5