From 2e5fa45ddfbb5cffa1e78221f1cea706e2f298af Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Wed, 31 Jul 2019 10:51:42 +0200 Subject: New upstream version 1.19.90 --- docs/api/html/NetworkManager.conf.html | 55 +- docs/api/html/NetworkManager.devhelp2 | 34 +- docs/api/html/ch01.html | 5 +- ...rg.freedesktop.NetworkManager.Device.Modem.html | 39 + ...us-org.freedesktop.NetworkManager.Settings.html | 71 +- .../html/gdbus-org.freedesktop.NetworkManager.html | 10 + docs/api/html/index.html | 7 +- docs/api/html/ix01.html | 1484 ++++++++++---------- docs/api/html/nm-dbus-types.html | 137 +- docs/api/html/nm-openvswitch.html | 4 +- docs/api/html/nm-settings-ifcfg-rh.html | 65 +- docs/api/html/nm-settings.html | 212 +-- docs/api/html/nmcli.html | 4 +- docs/api/html/ref-settings.html | 5 +- docs/api/html/settings-6lowpan.html | 2 +- docs/api/html/settings-802-11-olpc-mesh.html | 2 +- .../html/settings-802-11-wireless-security.html | 10 +- docs/api/html/settings-802-11-wireless.html | 10 +- docs/api/html/settings-802-1x.html | 8 +- docs/api/html/settings-802-3-ethernet.html | 8 +- docs/api/html/settings-adsl.html | 2 +- docs/api/html/settings-bluetooth.html | 2 +- docs/api/html/settings-bond.html | 2 +- docs/api/html/settings-bridge-port.html | 4 +- docs/api/html/settings-bridge.html | 4 +- docs/api/html/settings-cdma.html | 2 +- docs/api/html/settings-connection.html | 12 +- docs/api/html/settings-dcb.html | 14 +- docs/api/html/settings-dummy.html | 2 +- docs/api/html/settings-ethtool.html | 2 +- docs/api/html/settings-generic.html | 2 +- docs/api/html/settings-gsm.html | 2 +- docs/api/html/settings-infiniband.html | 2 +- docs/api/html/settings-ip-tunnel.html | 2 +- docs/api/html/settings-ipv4.html | 16 +- docs/api/html/settings-ipv6.html | 16 +- docs/api/html/settings-macsec.html | 2 +- docs/api/html/settings-macvlan.html | 2 +- docs/api/html/settings-match.html | 4 +- docs/api/html/settings-ovs-bridge.html | 12 +- docs/api/html/settings-ovs-dpdk.html | 69 + docs/api/html/settings-ovs-interface.html | 10 +- docs/api/html/settings-ovs-patch.html | 4 +- docs/api/html/settings-ovs-port.html | 4 +- docs/api/html/settings-ppp.html | 4 +- docs/api/html/settings-pppoe.html | 4 +- docs/api/html/settings-proxy.html | 4 +- docs/api/html/settings-serial.html | 4 +- docs/api/html/settings-sriov.html | 6 +- docs/api/html/settings-tc.html | 8 +- docs/api/html/settings-team-port.html | 10 +- docs/api/html/settings-team.html | 22 +- docs/api/html/settings-tun.html | 4 +- docs/api/html/settings-user.html | 4 +- docs/api/html/settings-vlan.html | 8 +- docs/api/html/settings-vpn.html | 4 +- docs/api/html/settings-vxlan.html | 4 +- docs/api/html/settings-wifi-p2p.html | 4 +- docs/api/html/settings-wimax.html | 4 +- docs/api/html/settings-wireguard.html | 20 +- docs/api/html/settings-wpan.html | 4 +- 61 files changed, 1453 insertions(+), 1030 deletions(-) create mode 100644 docs/api/html/settings-ovs-dpdk.html (limited to 'docs/api/html') diff --git a/docs/api/html/NetworkManager.conf.html b/docs/api/html/NetworkManager.conf.html index 0069f1e4..e669367e 100644 --- a/docs/api/html/NetworkManager.conf.html +++ b/docs/api/html/NetworkManager.conf.html @@ -146,33 +146,7 @@ plugins-=remove-me

monitor-connection-files

- -

Whether the configured settings plugin(s) - should set up file monitors and immediately pick up changes - made to connection files while NetworkManager is running. This - is disabled by default; NetworkManager will only read - the connection files at startup, and when explicitly requested - via the ReloadConnections D-Bus call. If this key is set to - 'true', then NetworkManager will reload - connection files any time they changed. - Automatic reloading is not advised because there are race conditions - involved and it depends on the way how the editor updates the file. - In some situations, NetworkManager might first delete and add the - connection anew, instead of updating the existing one. Also, NetworkManager - might pick up incomplete settings while the user is still editing the files. -

-

- Note that neither this setting nor restarting the NetworkManager daemon - is the advised way to reload connection profiles from disk. Instead, after - modifying the files reload them with nmcli connection reload - or nmcli connection load "$FILENAME". Even better, - instead of modifying files directly, use NetworkManager tools like - nmcli, nmtui or the GUI. -

-

- This setting is deprecated and will have no effect in the future. -

- +

This setting is deprecated and has no effect.

auth-polkit

@@ -323,8 +297,8 @@ no-auto-default=* /etc/resolv.conf to reflect the nameservers provided by currently active connections.

dnsmasq: NetworkManager will run - dnsmasq as a local caching nameserver, using a "split DNS" - configuration if you are connected to a VPN, and then update + dnsmasq as a local caching nameserver, using "Conditional Forwarding" + if you are connected to a VPN, and then update resolv.conf to point to the local nameserver. It is possible to pass custom options to the dnsmasq instance by adding them to files in the @@ -338,8 +312,8 @@ no-auto-default=*

systemd-resolved: NetworkManager will push the DNS configuration to systemd-resolved

unbound: NetworkManager will talk - to unbound and dnssec-triggerd, providing a "split DNS" - configuration with DNSSEC support. /etc/resolv.conf + to unbound and dnssec-triggerd, using "Conditional Forwarding" + with DNSSEC support. /etc/resolv.conf will be managed by dnssec-trigger daemon.

none: NetworkManager will not modify resolv.conf. This implies @@ -1354,21 +1328,10 @@ enable=nm-version-min:1.3,nm-version-min:1.2.6,nm-version-min:1.0.16

ibft, no-ibft

- -

- This plugin allows to read iBFT configuration (iSCSI Boot Firmware Table). - The configuration is read using /sbin/iscsiadm. Users are - expected to configure iBFT connections via the firmware interfaces. - If ibft support is available, it is automatically enabled after - ifcfg-rh. This can be disabled by no-ibft. - You can also explicitly specify ibft to load the - plugin without ifcfg-rh or to change the plugin order. -

-

- Note that ibft plugin uses /sbin/iscsiadm and thus requires - CAP_SYS_ADMIN capability. -

- +

+ These plugins are deprecated and their selection has no effect. + This is now handled by nm-initrd-generator. +

ifcfg-suse, ifnet

diff --git a/docs/api/html/NetworkManager.devhelp2 b/docs/api/html/NetworkManager.devhelp2 index 840a72f4..94d5b2db 100644 --- a/docs/api/html/NetworkManager.devhelp2 +++ b/docs/api/html/NetworkManager.devhelp2 @@ -39,6 +39,7 @@ + @@ -205,6 +206,7 @@ + @@ -216,6 +218,7 @@ + @@ -335,6 +338,9 @@ + + + @@ -518,6 +524,7 @@ + @@ -607,6 +614,7 @@ + @@ -628,6 +636,7 @@ + @@ -792,16 +801,21 @@ - - - - - - - - - - + + + + + + + + + + + + + + + diff --git a/docs/api/html/ch01.html b/docs/api/html/ch01.html index 5c9cfa82..06286263 100644 --- a/docs/api/html/ch01.html +++ b/docs/api/html/ch01.html @@ -93,6 +93,9 @@ ovs-bridge — OvsBridge Link Settings
+ovs-dpdk — OvsDpdk Link Settings +
+
ovs-interface — Open vSwitch Interface Settings
@@ -150,7 +153,7 @@ 802-3-ethernet — Wired Ethernet Settings
-wireguard — WireGuard Ethernet Settings +wireguard — WireGuard Settings
802-11-wireless — Wi-Fi Settings diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Modem.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Modem.html index fc1273e1..7081873b 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Modem.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Device.Modem.html @@ -44,6 +44,9 @@ 
 ModemCapabilities    readable   u
 CurrentCapabilities  readable   u
+DeviceId             readable   s
+OperatorCode         readable   s
+Apn                  readable   s
@@ -98,6 +101,42 @@ CurrentCapabilities readable u

Returns: NMDeviceModemCapabilities

+
+
+

The "DeviceId" property

+
+DeviceId  readable   s
+
+

An identifier used by the modem backend (ModemManager) that aims to + uniquely identify the a device. Can be used to match a connection to a + particular device. +

+

Since: 1.20 +

+
+
+
+

The "OperatorCode" property

+
+OperatorCode  readable   s
+
+

The MCC and MNC (concatenated) of the network the modem is connected to. + Blank if disconnected or not a 3GPP modem. +

+

Since: 1.20 +

+
+
+
+

The "Apn" property

+
+Apn  readable   s
+
+

The access point name the modem is connected to. Blank if disconnected. +

+

Since: 1.20 +

+
diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html index c40fc600..a815251f 100644 --- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html +++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.Settings.html @@ -43,6 +43,11 @@ OUT o path); AddConnectionUnsaved (IN a{sa{sv}} connection, OUT o path); +AddConnection2 (IN a{sa{sv}} settings, + IN u flags, + IN a{sv} args, + OUT o path, + OUT a{sv} result); LoadConnections (IN as filenames, OUT b status, OUT as failures); @@ -158,9 +163,7 @@ AddConnectionUnsaved (IN a{sa{sv}} connection, does not start the network connection unless (1) device is idle and able to connect to the network described by the new connection, and (2) the connection is allowed to be started automatically. Use the 'Save' method - on the connection to save these changes to disk. Note that unsaved changes - will be lost if the connection is reloaded from disk (either automatically - on file change or due to an explicit ReloadConnections call). + on the connection to save these changes to disk.

@@ -181,6 +184,68 @@ AddConnectionUnsaved (IN a{sa{sv}} connection,
+

The AddConnection2() method

+
+AddConnection2 (IN  a{sa{sv}} settings,
+                IN  u         flags,
+                IN  a{sv}     args,
+                OUT o         path,
+                OUT a{sv}     result);
+
+

"0x1" (to-disk), + "0x2" (in-memory), + "0x20" (block-autoconnect). + Unknown flags cause the call to fail. + args: optional arguments dictionary, for extensibility. Currently no + arguments are accepted. Specifying unknown keys causes the call + to fail. + path: Object path of the new connection that was just added. + result: output argument, currently no additional results are returned. +

+

Add a new connection profile. +

+

Either the flags 0x1 (to-disk) or 0x2 (in-memory) must be specified. + The effect is whether to behave like AddConnection or AddConnectionUnsaved. + If 0x20 (block-autoconnect) is specified, autoconnect for the new profile + is blocked from the beginnin. Otherwise, the profile might automatically + connect if a suitable device is around. +

+

AddConnection2 is a extensible alternative to AddConnection, and AddConnectionUnsaved. + The new variant can do everything that the older variants could, and more. +

+

Since: 1.20 +

+
++++ + + + + + + + + + + + + + + + + + + + + + + +

IN a{sa{sv}} settings:

New connection settings, properties, and (optionally) secrets.

IN u flags:

optional flags argument. Currently the following flags are supported:

IN a{sv} args:

OUT o path:

OUT a{sv} result:

+
+
+

The LoadConnections() method

 LoadConnections (IN  as filenames,
diff --git a/docs/api/html/gdbus-org.freedesktop.NetworkManager.html b/docs/api/html/gdbus-org.freedesktop.NetworkManager.html
index c28fafe6..663b3114 100644
--- a/docs/api/html/gdbus-org.freedesktop.NetworkManager.html
+++ b/docs/api/html/gdbus-org.freedesktop.NetworkManager.html
@@ -113,6 +113,7 @@
 Connectivity                readable   u
 ConnectivityCheckAvailable  readable   b
 ConnectivityCheckEnabled    readwrite  b
+ConnectivityCheckUri        readable   s
 GlobalDnsConfiguration      readwrite  a{sv}
@@ -1011,6 +1012,15 @@ ConnectivityCheckEnabled readwrite b
+

The "ConnectivityCheckUri" property

+
+ConnectivityCheckUri  readable   s
+
+

The URI that NetworkManager will hit to check if there is internet connectivity. +

+
+
+

The "GlobalDnsConfiguration" property

 GlobalDnsConfiguration  readwrite  a{sv}
diff --git a/docs/api/html/index.html b/docs/api/html/index.html
index 61de5bbe..1511a823 100644
--- a/docs/api/html/index.html
+++ b/docs/api/html/index.html
@@ -16,7 +16,7 @@
 

 

 

-      for NetworkManager 1.18.0
+      for NetworkManager 1.19.90
 
       The latest version of this documentation can be found on-line at
       https://developer.gnome.org/NetworkManager/stable/.
@@ -178,6 +178,9 @@
 ovs-bridge — OvsBridge Link Settings
+ovs-dpdk — OvsDpdk Link Settings +
+
ovs-interface — Open vSwitch Interface Settings
@@ -235,7 +238,7 @@ 802-3-ethernet — Wired Ethernet Settings
-wireguard — WireGuard Ethernet Settings +wireguard — WireGuard Settings
802-11-wireless — Wi-Fi Settings diff --git a/docs/api/html/ix01.html b/docs/api/html/ix01.html index 72020dc9..787793b7 100644 --- a/docs/api/html/ix01.html +++ b/docs/api/html/ix01.html @@ -26,1579 +26,1601 @@

Symbols

-
org.freedesktop.NetworkManager.AccessPoint, org.freedesktop.NetworkManager.AccessPoint +
org.freedesktop.NetworkManager.AccessPoint, org.freedesktop.NetworkManager.AccessPoint
-
org.freedesktop.NetworkManager.AccessPoint::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.AccessPoint::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.AccessPoint:Flags, The "Flags" property +
org.freedesktop.NetworkManager.AccessPoint:Flags, The "Flags" property
-
org.freedesktop.NetworkManager.AccessPoint:Frequency, The "Frequency" property +
org.freedesktop.NetworkManager.AccessPoint:Frequency, The "Frequency" property
-
org.freedesktop.NetworkManager.AccessPoint:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.AccessPoint:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.AccessPoint:LastSeen, The "LastSeen" property +
org.freedesktop.NetworkManager.AccessPoint:LastSeen, The "LastSeen" property
-
org.freedesktop.NetworkManager.AccessPoint:MaxBitrate, The "MaxBitrate" property +
org.freedesktop.NetworkManager.AccessPoint:MaxBitrate, The "MaxBitrate" property
-
org.freedesktop.NetworkManager.AccessPoint:Mode, The "Mode" property +
org.freedesktop.NetworkManager.AccessPoint:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.AccessPoint:RsnFlags, The "RsnFlags" property +
org.freedesktop.NetworkManager.AccessPoint:RsnFlags, The "RsnFlags" property
-
org.freedesktop.NetworkManager.AccessPoint:Ssid, The "Ssid" property +
org.freedesktop.NetworkManager.AccessPoint:Ssid, The "Ssid" property
-
org.freedesktop.NetworkManager.AccessPoint:Strength, The "Strength" property +
org.freedesktop.NetworkManager.AccessPoint:Strength, The "Strength" property
-
org.freedesktop.NetworkManager.AccessPoint:WpaFlags, The "WpaFlags" property +
org.freedesktop.NetworkManager.AccessPoint:WpaFlags, The "WpaFlags" property
-
org.freedesktop.NetworkManager.AgentManager, org.freedesktop.NetworkManager.AgentManager +
org.freedesktop.NetworkManager.AgentManager, org.freedesktop.NetworkManager.AgentManager
-
org.freedesktop.NetworkManager.AgentManager.Register(), The Register() method +
org.freedesktop.NetworkManager.AgentManager.Register(), The Register() method
-
org.freedesktop.NetworkManager.AgentManager.RegisterWithCapabilities(), The RegisterWithCapabilities() method +
org.freedesktop.NetworkManager.AgentManager.RegisterWithCapabilities(), The RegisterWithCapabilities() method
-
org.freedesktop.NetworkManager.AgentManager.Unregister(), The Unregister() method +
org.freedesktop.NetworkManager.AgentManager.Unregister(), The Unregister() method
-
org.freedesktop.NetworkManager.Device, org.freedesktop.NetworkManager.Device +
org.freedesktop.NetworkManager.Device, org.freedesktop.NetworkManager.Device
-
org.freedesktop.NetworkManager.Device.Adsl, org.freedesktop.NetworkManager.Device.Adsl +
org.freedesktop.NetworkManager.Device.Adsl, org.freedesktop.NetworkManager.Device.Adsl
-
org.freedesktop.NetworkManager.Device.Adsl::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Adsl::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Adsl:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Adsl:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Bluetooth, org.freedesktop.NetworkManager.Device.Bluetooth +
org.freedesktop.NetworkManager.Device.Bluetooth, org.freedesktop.NetworkManager.Device.Bluetooth
-
org.freedesktop.NetworkManager.Device.Bluetooth::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Bluetooth::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Bluetooth:BtCapabilities, The "BtCapabilities" property +
org.freedesktop.NetworkManager.Device.Bluetooth:BtCapabilities, The "BtCapabilities" property
-
org.freedesktop.NetworkManager.Device.Bluetooth:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Bluetooth:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Bluetooth:Name, The "Name" property +
org.freedesktop.NetworkManager.Device.Bluetooth:Name, The "Name" property
-
org.freedesktop.NetworkManager.Device.Bond, org.freedesktop.NetworkManager.Device.Bond +
org.freedesktop.NetworkManager.Device.Bond, org.freedesktop.NetworkManager.Device.Bond
-
org.freedesktop.NetworkManager.Device.Bond::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Bond::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Bond:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Bond:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Bond:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Bond:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Bond:Slaves, The "Slaves" property +
org.freedesktop.NetworkManager.Device.Bond:Slaves, The "Slaves" property
-
org.freedesktop.NetworkManager.Device.Bridge, org.freedesktop.NetworkManager.Device.Bridge +
org.freedesktop.NetworkManager.Device.Bridge, org.freedesktop.NetworkManager.Device.Bridge
-
org.freedesktop.NetworkManager.Device.Bridge::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Bridge::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Bridge:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Bridge:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Bridge:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Bridge:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Bridge:Slaves, The "Slaves" property +
org.freedesktop.NetworkManager.Device.Bridge:Slaves, The "Slaves" property
-
org.freedesktop.NetworkManager.Device.Delete(), The Delete() method +
org.freedesktop.NetworkManager.Device.Delete(), The Delete() method
-
org.freedesktop.NetworkManager.Device.Disconnect(), The Disconnect() method +
org.freedesktop.NetworkManager.Device.Disconnect(), The Disconnect() method
-
org.freedesktop.NetworkManager.Device.Dummy, org.freedesktop.NetworkManager.Device.Dummy +
org.freedesktop.NetworkManager.Device.Dummy, org.freedesktop.NetworkManager.Device.Dummy
-
org.freedesktop.NetworkManager.Device.Dummy::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Dummy::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Dummy:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Dummy:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Generic, org.freedesktop.NetworkManager.Device.Generic +
org.freedesktop.NetworkManager.Device.Generic, org.freedesktop.NetworkManager.Device.Generic
-
org.freedesktop.NetworkManager.Device.Generic::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Generic::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Generic:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Generic:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Generic:TypeDescription, The "TypeDescription" property +
org.freedesktop.NetworkManager.Device.Generic:TypeDescription, The "TypeDescription" property
-
org.freedesktop.NetworkManager.Device.GetAppliedConnection(), The GetAppliedConnection() method +
org.freedesktop.NetworkManager.Device.GetAppliedConnection(), The GetAppliedConnection() method
-
org.freedesktop.NetworkManager.Device.Infiniband, org.freedesktop.NetworkManager.Device.Infiniband +
org.freedesktop.NetworkManager.Device.Infiniband, org.freedesktop.NetworkManager.Device.Infiniband
-
org.freedesktop.NetworkManager.Device.Infiniband::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Infiniband::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Infiniband:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Infiniband:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Infiniband:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Infiniband:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.IPTunnel, org.freedesktop.NetworkManager.Device.IPTunnel +
org.freedesktop.NetworkManager.Device.IPTunnel, org.freedesktop.NetworkManager.Device.IPTunnel
-
org.freedesktop.NetworkManager.Device.IPTunnel::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.IPTunnel::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.IPTunnel:EncapsulationLimit, The "EncapsulationLimit" property +
org.freedesktop.NetworkManager.Device.IPTunnel:EncapsulationLimit, The "EncapsulationLimit" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Flags, The "Flags" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Flags, The "Flags" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:FlowLabel, The "FlowLabel" property +
org.freedesktop.NetworkManager.Device.IPTunnel:FlowLabel, The "FlowLabel" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:InputKey, The "InputKey" property +
org.freedesktop.NetworkManager.Device.IPTunnel:InputKey, The "InputKey" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Local, The "Local" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Local, The "Local" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Mode, The "Mode" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:OutputKey, The "OutputKey" property +
org.freedesktop.NetworkManager.Device.IPTunnel:OutputKey, The "OutputKey" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:PathMtuDiscovery, The "PathMtuDiscovery" property +
org.freedesktop.NetworkManager.Device.IPTunnel:PathMtuDiscovery, The "PathMtuDiscovery" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Remote, The "Remote" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Remote, The "Remote" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Tos, The "Tos" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Tos, The "Tos" property
-
org.freedesktop.NetworkManager.Device.IPTunnel:Ttl, The "Ttl" property +
org.freedesktop.NetworkManager.Device.IPTunnel:Ttl, The "Ttl" property
-
org.freedesktop.NetworkManager.Device.Lowpan, org.freedesktop.NetworkManager.Device.Lowpan +
org.freedesktop.NetworkManager.Device.Lowpan, org.freedesktop.NetworkManager.Device.Lowpan
-
org.freedesktop.NetworkManager.Device.Lowpan:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Lowpan:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Lowpan:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.Lowpan:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.Macsec, org.freedesktop.NetworkManager.Device.Macsec +
org.freedesktop.NetworkManager.Device.Macsec, org.freedesktop.NetworkManager.Device.Macsec
-
org.freedesktop.NetworkManager.Device.Macsec::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Macsec::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Macsec:CipherSuite, The "CipherSuite" property +
org.freedesktop.NetworkManager.Device.Macsec:CipherSuite, The "CipherSuite" property
-
org.freedesktop.NetworkManager.Device.Macsec:EncodingSa, The "EncodingSa" property +
org.freedesktop.NetworkManager.Device.Macsec:EncodingSa, The "EncodingSa" property
-
org.freedesktop.NetworkManager.Device.Macsec:Encrypt, The "Encrypt" property +
org.freedesktop.NetworkManager.Device.Macsec:Encrypt, The "Encrypt" property
-
org.freedesktop.NetworkManager.Device.Macsec:Es, The "Es" property +
org.freedesktop.NetworkManager.Device.Macsec:Es, The "Es" property
-
org.freedesktop.NetworkManager.Device.Macsec:IcvLength, The "IcvLength" property +
org.freedesktop.NetworkManager.Device.Macsec:IcvLength, The "IcvLength" property
-
org.freedesktop.NetworkManager.Device.Macsec:IncludeSci, The "IncludeSci" property +
org.freedesktop.NetworkManager.Device.Macsec:IncludeSci, The "IncludeSci" property
-
org.freedesktop.NetworkManager.Device.Macsec:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.Macsec:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.Macsec:Protect, The "Protect" property +
org.freedesktop.NetworkManager.Device.Macsec:Protect, The "Protect" property
-
org.freedesktop.NetworkManager.Device.Macsec:ReplayProtect, The "ReplayProtect" property +
org.freedesktop.NetworkManager.Device.Macsec:ReplayProtect, The "ReplayProtect" property
-
org.freedesktop.NetworkManager.Device.Macsec:Scb, The "Scb" property +
org.freedesktop.NetworkManager.Device.Macsec:Scb, The "Scb" property
-
org.freedesktop.NetworkManager.Device.Macsec:Sci, The "Sci" property +
org.freedesktop.NetworkManager.Device.Macsec:Sci, The "Sci" property
-
org.freedesktop.NetworkManager.Device.Macsec:Validation, The "Validation" property +
org.freedesktop.NetworkManager.Device.Macsec:Validation, The "Validation" property
-
org.freedesktop.NetworkManager.Device.Macsec:Window, The "Window" property +
org.freedesktop.NetworkManager.Device.Macsec:Window, The "Window" property
-
org.freedesktop.NetworkManager.Device.Macvlan, org.freedesktop.NetworkManager.Device.Macvlan +
org.freedesktop.NetworkManager.Device.Macvlan, org.freedesktop.NetworkManager.Device.Macvlan
-
org.freedesktop.NetworkManager.Device.Macvlan::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Macvlan::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Macvlan:Mode, The "Mode" property +
org.freedesktop.NetworkManager.Device.Macvlan:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.Device.Macvlan:NoPromisc, The "NoPromisc" property +
org.freedesktop.NetworkManager.Device.Macvlan:NoPromisc, The "NoPromisc" property
-
org.freedesktop.NetworkManager.Device.Macvlan:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.Macvlan:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.Macvlan:Tap, The "Tap" property +
org.freedesktop.NetworkManager.Device.Macvlan:Tap, The "Tap" property
-
org.freedesktop.NetworkManager.Device.Modem, org.freedesktop.NetworkManager.Device.Modem +
org.freedesktop.NetworkManager.Device.Modem, org.freedesktop.NetworkManager.Device.Modem
-
org.freedesktop.NetworkManager.Device.Modem::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Modem::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Modem:CurrentCapabilities, The "CurrentCapabilities" property +
org.freedesktop.NetworkManager.Device.Modem:Apn, The "Apn" property
-
org.freedesktop.NetworkManager.Device.Modem:ModemCapabilities, The "ModemCapabilities" property +
org.freedesktop.NetworkManager.Device.Modem:CurrentCapabilities, The "CurrentCapabilities" property
-
org.freedesktop.NetworkManager.Device.OlpcMesh, org.freedesktop.NetworkManager.Device.OlpcMesh +
org.freedesktop.NetworkManager.Device.Modem:DeviceId, The "DeviceId" property
-
org.freedesktop.NetworkManager.Device.OlpcMesh::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Modem:ModemCapabilities, The "ModemCapabilities" property
-
org.freedesktop.NetworkManager.Device.OlpcMesh:ActiveChannel, The "ActiveChannel" property +
org.freedesktop.NetworkManager.Device.Modem:OperatorCode, The "OperatorCode" property
-
org.freedesktop.NetworkManager.Device.OlpcMesh:Companion, The "Companion" property +
org.freedesktop.NetworkManager.Device.OlpcMesh, org.freedesktop.NetworkManager.Device.OlpcMesh
-
org.freedesktop.NetworkManager.Device.OlpcMesh:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.OlpcMesh::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.OvsBridge, org.freedesktop.NetworkManager.Device.OvsBridge +
org.freedesktop.NetworkManager.Device.OlpcMesh:ActiveChannel, The "ActiveChannel" property
-
org.freedesktop.NetworkManager.Device.OvsBridge::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.OlpcMesh:Companion, The "Companion" property
-
org.freedesktop.NetworkManager.Device.OvsBridge:Slaves, The "Slaves" property +
org.freedesktop.NetworkManager.Device.OlpcMesh:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.OvsInterface, org.freedesktop.NetworkManager.Device.OvsInterface +
org.freedesktop.NetworkManager.Device.OvsBridge, org.freedesktop.NetworkManager.Device.OvsBridge
-
org.freedesktop.NetworkManager.Device.OvsInterface::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.OvsBridge::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.OvsPort, org.freedesktop.NetworkManager.Device.OvsPort +
org.freedesktop.NetworkManager.Device.OvsBridge:Slaves, The "Slaves" property
-
org.freedesktop.NetworkManager.Device.OvsPort::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.OvsInterface, org.freedesktop.NetworkManager.Device.OvsInterface
-
org.freedesktop.NetworkManager.Device.OvsPort:Slaves, The "Slaves" property +
org.freedesktop.NetworkManager.Device.OvsInterface::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Ppp, org.freedesktop.NetworkManager.Device.Ppp +
org.freedesktop.NetworkManager.Device.OvsPort, org.freedesktop.NetworkManager.Device.OvsPort
-
org.freedesktop.NetworkManager.Device.Ppp::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.OvsPort::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Reapply(), The Reapply() method +
org.freedesktop.NetworkManager.Device.OvsPort:Slaves, The "Slaves" property
-
org.freedesktop.NetworkManager.Device.Statistics, org.freedesktop.NetworkManager.Device.Statistics +
org.freedesktop.NetworkManager.Device.Ppp, org.freedesktop.NetworkManager.Device.Ppp
-
org.freedesktop.NetworkManager.Device.Statistics::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Ppp::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Statistics:RefreshRateMs, The "RefreshRateMs" property +
org.freedesktop.NetworkManager.Device.Reapply(), The Reapply() method
-
org.freedesktop.NetworkManager.Device.Statistics:RxBytes, The "RxBytes" property +
org.freedesktop.NetworkManager.Device.Statistics, org.freedesktop.NetworkManager.Device.Statistics
-
org.freedesktop.NetworkManager.Device.Statistics:TxBytes, The "TxBytes" property +
org.freedesktop.NetworkManager.Device.Statistics::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Team, org.freedesktop.NetworkManager.Device.Team +
org.freedesktop.NetworkManager.Device.Statistics:RefreshRateMs, The "RefreshRateMs" property
-
org.freedesktop.NetworkManager.Device.Team::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Statistics:RxBytes, The "RxBytes" property
-
org.freedesktop.NetworkManager.Device.Team:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Statistics:TxBytes, The "TxBytes" property
-
org.freedesktop.NetworkManager.Device.Team:Config, The "Config" property +
org.freedesktop.NetworkManager.Device.Team, org.freedesktop.NetworkManager.Device.Team
-
org.freedesktop.NetworkManager.Device.Team:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Team::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Team:Slaves, The "Slaves" property +
org.freedesktop.NetworkManager.Device.Team:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Tun, org.freedesktop.NetworkManager.Device.Tun +
org.freedesktop.NetworkManager.Device.Team:Config, The "Config" property
-
org.freedesktop.NetworkManager.Device.Tun::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Team:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Tun:Group, The "Group" property +
org.freedesktop.NetworkManager.Device.Team:Slaves, The "Slaves" property
-
org.freedesktop.NetworkManager.Device.Tun:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Tun, org.freedesktop.NetworkManager.Device.Tun
-
org.freedesktop.NetworkManager.Device.Tun:Mode, The "Mode" property +
org.freedesktop.NetworkManager.Device.Tun::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Tun:MultiQueue, The "MultiQueue" property +
org.freedesktop.NetworkManager.Device.Tun:Group, The "Group" property
-
org.freedesktop.NetworkManager.Device.Tun:NoPi, The "NoPi" property +
org.freedesktop.NetworkManager.Device.Tun:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Tun:Owner, The "Owner" property +
org.freedesktop.NetworkManager.Device.Tun:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.Device.Tun:VnetHdr, The "VnetHdr" property +
org.freedesktop.NetworkManager.Device.Tun:MultiQueue, The "MultiQueue" property
-
org.freedesktop.NetworkManager.Device.Veth, org.freedesktop.NetworkManager.Device.Veth +
org.freedesktop.NetworkManager.Device.Tun:NoPi, The "NoPi" property
-
org.freedesktop.NetworkManager.Device.Veth::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Tun:Owner, The "Owner" property
-
org.freedesktop.NetworkManager.Device.Veth:Peer, The "Peer" property +
org.freedesktop.NetworkManager.Device.Tun:VnetHdr, The "VnetHdr" property
-
org.freedesktop.NetworkManager.Device.Vlan, org.freedesktop.NetworkManager.Device.Vlan +
org.freedesktop.NetworkManager.Device.Veth, org.freedesktop.NetworkManager.Device.Veth
-
org.freedesktop.NetworkManager.Device.Vlan::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Veth::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Vlan:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Veth:Peer, The "Peer" property
-
org.freedesktop.NetworkManager.Device.Vlan:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Vlan, org.freedesktop.NetworkManager.Device.Vlan
-
org.freedesktop.NetworkManager.Device.Vlan:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.Vlan::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Vlan:VlanId, The "VlanId" property +
org.freedesktop.NetworkManager.Device.Vlan:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Vxlan, org.freedesktop.NetworkManager.Device.Vxlan +
org.freedesktop.NetworkManager.Device.Vlan:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Vxlan::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Vlan:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Ageing, The "Ageing" property +
org.freedesktop.NetworkManager.Device.Vlan:VlanId, The "VlanId" property
-
org.freedesktop.NetworkManager.Device.Vxlan:DstPort, The "DstPort" property +
org.freedesktop.NetworkManager.Device.Vxlan, org.freedesktop.NetworkManager.Device.Vxlan
-
org.freedesktop.NetworkManager.Device.Vxlan:Group, The "Group" property +
org.freedesktop.NetworkManager.Device.Vxlan::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Vxlan:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Vxlan:Ageing, The "Ageing" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Id, The "Id" property +
org.freedesktop.NetworkManager.Device.Vxlan:DstPort, The "DstPort" property
-
org.freedesktop.NetworkManager.Device.Vxlan:L2miss, The "L2miss" property +
org.freedesktop.NetworkManager.Device.Vxlan:Group, The "Group" property
-
org.freedesktop.NetworkManager.Device.Vxlan:L3miss, The "L3miss" property +
org.freedesktop.NetworkManager.Device.Vxlan:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Learning, The "Learning" property +
org.freedesktop.NetworkManager.Device.Vxlan:Id, The "Id" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Limit, The "Limit" property +
org.freedesktop.NetworkManager.Device.Vxlan:L2miss, The "L2miss" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Local, The "Local" property +
org.freedesktop.NetworkManager.Device.Vxlan:L3miss, The "L3miss" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Parent, The "Parent" property +
org.freedesktop.NetworkManager.Device.Vxlan:Learning, The "Learning" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Proxy, The "Proxy" property +
org.freedesktop.NetworkManager.Device.Vxlan:Limit, The "Limit" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Rsc, The "Rsc" property +
org.freedesktop.NetworkManager.Device.Vxlan:Local, The "Local" property
-
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMax, The "SrcPortMax" property +
org.freedesktop.NetworkManager.Device.Vxlan:Parent, The "Parent" property
-
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMin, The "SrcPortMin" property +
org.freedesktop.NetworkManager.Device.Vxlan:Proxy, The "Proxy" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Tos, The "Tos" property +
org.freedesktop.NetworkManager.Device.Vxlan:Rsc, The "Rsc" property
-
org.freedesktop.NetworkManager.Device.Vxlan:Ttl, The "Ttl" property +
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMax, The "SrcPortMax" property
-
org.freedesktop.NetworkManager.Device.WireGuard, org.freedesktop.NetworkManager.Device.WireGuard +
org.freedesktop.NetworkManager.Device.Vxlan:SrcPortMin, The "SrcPortMin" property
-
org.freedesktop.NetworkManager.Device.WireGuard:FwMark, The "FwMark" property +
org.freedesktop.NetworkManager.Device.Vxlan:Tos, The "Tos" property
-
org.freedesktop.NetworkManager.Device.WireGuard:ListenPort, The "ListenPort" property +
org.freedesktop.NetworkManager.Device.Vxlan:Ttl, The "Ttl" property
-
org.freedesktop.NetworkManager.Device.WireGuard:PublicKey, The "PublicKey" property +
org.freedesktop.NetworkManager.Device.WireGuard, org.freedesktop.NetworkManager.Device.WireGuard
-
org.freedesktop.NetworkManager.Device.Wpan, org.freedesktop.NetworkManager.Device.Wpan +
org.freedesktop.NetworkManager.Device.WireGuard:FwMark, The "FwMark" property
-
org.freedesktop.NetworkManager.Device.Wpan:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.WireGuard:ListenPort, The "ListenPort" property
-
org.freedesktop.NetworkManager.Device::StateChanged, The "StateChanged" signal +
org.freedesktop.NetworkManager.Device.WireGuard:PublicKey, The "PublicKey" property
-
org.freedesktop.NetworkManager.Device:ActiveConnection, The "ActiveConnection" property +
org.freedesktop.NetworkManager.Device.Wpan, org.freedesktop.NetworkManager.Device.Wpan
-
org.freedesktop.NetworkManager.Device:Autoconnect, The "Autoconnect" property +
org.freedesktop.NetworkManager.Device.Wpan:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device:AvailableConnections, The "AvailableConnections" property +
org.freedesktop.NetworkManager.Device::StateChanged, The "StateChanged" signal
-
org.freedesktop.NetworkManager.Device:Capabilities, The "Capabilities" property +
org.freedesktop.NetworkManager.Device:ActiveConnection, The "ActiveConnection" property
-
org.freedesktop.NetworkManager.Device:DeviceType, The "DeviceType" property +
org.freedesktop.NetworkManager.Device:Autoconnect, The "Autoconnect" property
-
org.freedesktop.NetworkManager.Device:Dhcp4Config, The "Dhcp4Config" property +
org.freedesktop.NetworkManager.Device:AvailableConnections, The "AvailableConnections" property
-
org.freedesktop.NetworkManager.Device:Dhcp6Config, The "Dhcp6Config" property +
org.freedesktop.NetworkManager.Device:Capabilities, The "Capabilities" property
-
org.freedesktop.NetworkManager.Device:Driver, The "Driver" property +
org.freedesktop.NetworkManager.Device:DeviceType, The "DeviceType" property
-
org.freedesktop.NetworkManager.Device:DriverVersion, The "DriverVersion" property +
org.freedesktop.NetworkManager.Device:Dhcp4Config, The "Dhcp4Config" property
-
org.freedesktop.NetworkManager.Device:FirmwareMissing, The "FirmwareMissing" property +
org.freedesktop.NetworkManager.Device:Dhcp6Config, The "Dhcp6Config" property
-
org.freedesktop.NetworkManager.Device:FirmwareVersion, The "FirmwareVersion" property +
org.freedesktop.NetworkManager.Device:Driver, The "Driver" property
-
org.freedesktop.NetworkManager.Device:Interface, The "Interface" property +
org.freedesktop.NetworkManager.Device:DriverVersion, The "DriverVersion" property
-
org.freedesktop.NetworkManager.Device:Ip4Address, The "Ip4Address" property +
org.freedesktop.NetworkManager.Device:FirmwareMissing, The "FirmwareMissing" property
-
org.freedesktop.NetworkManager.Device:Ip4Config, The "Ip4Config" property +
org.freedesktop.NetworkManager.Device:FirmwareVersion, The "FirmwareVersion" property
-
org.freedesktop.NetworkManager.Device:Ip4Connectivity, The "Ip4Connectivity" property +
org.freedesktop.NetworkManager.Device:Interface, The "Interface" property
-
org.freedesktop.NetworkManager.Device:Ip6Config, The "Ip6Config" property +
org.freedesktop.NetworkManager.Device:Ip4Address, The "Ip4Address" property
-
org.freedesktop.NetworkManager.Device:Ip6Connectivity, The "Ip6Connectivity" property +
org.freedesktop.NetworkManager.Device:Ip4Config, The "Ip4Config" property
-
org.freedesktop.NetworkManager.Device:IpInterface, The "IpInterface" property +
org.freedesktop.NetworkManager.Device:Ip4Connectivity, The "Ip4Connectivity" property
-
org.freedesktop.NetworkManager.Device:LldpNeighbors, The "LldpNeighbors" property +
org.freedesktop.NetworkManager.Device:Ip6Config, The "Ip6Config" property
-
org.freedesktop.NetworkManager.Device:Managed, The "Managed" property +
org.freedesktop.NetworkManager.Device:Ip6Connectivity, The "Ip6Connectivity" property
-
org.freedesktop.NetworkManager.Device:Metered, The "Metered" property +
org.freedesktop.NetworkManager.Device:IpInterface, The "IpInterface" property
-
org.freedesktop.NetworkManager.Device:Mtu, The "Mtu" property +
org.freedesktop.NetworkManager.Device:LldpNeighbors, The "LldpNeighbors" property
-
org.freedesktop.NetworkManager.Device:NmPluginMissing, The "NmPluginMissing" property +
org.freedesktop.NetworkManager.Device:Managed, The "Managed" property
-
org.freedesktop.NetworkManager.Device:PhysicalPortId, The "PhysicalPortId" property +
org.freedesktop.NetworkManager.Device:Metered, The "Metered" property
-
org.freedesktop.NetworkManager.Device:Real, The "Real" property +
org.freedesktop.NetworkManager.Device:Mtu, The "Mtu" property
-
org.freedesktop.NetworkManager.Device:State, The "State" property +
org.freedesktop.NetworkManager.Device:NmPluginMissing, The "NmPluginMissing" property
-
org.freedesktop.NetworkManager.Device:StateReason, The "StateReason" property +
org.freedesktop.NetworkManager.Device:PhysicalPortId, The "PhysicalPortId" property
-
org.freedesktop.NetworkManager.Device:Udi, The "Udi" property +
org.freedesktop.NetworkManager.Device:Real, The "Real" property
-
org.freedesktop.NetworkManager.DnsManager, org.freedesktop.NetworkManager.DnsManager +
org.freedesktop.NetworkManager.Device:State, The "State" property
-
org.freedesktop.NetworkManager.DnsManager:Configuration, The "Configuration" property +
org.freedesktop.NetworkManager.Device:StateReason, The "StateReason" property
-
org.freedesktop.NetworkManager.DnsManager:Mode, The "Mode" property +
org.freedesktop.NetworkManager.Device:Udi, The "Udi" property
-
org.freedesktop.NetworkManager.DnsManager:RcManager, The "RcManager" property +
org.freedesktop.NetworkManager.DnsManager, org.freedesktop.NetworkManager.DnsManager
-
org.freedesktop.NetworkManager.IP4Config, org.freedesktop.NetworkManager.IP4Config +
org.freedesktop.NetworkManager.DnsManager:Configuration, The "Configuration" property
-
org.freedesktop.NetworkManager.IP4Config::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.DnsManager:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.IP4Config:AddressData, The "AddressData" property +
org.freedesktop.NetworkManager.DnsManager:RcManager, The "RcManager" property
-
org.freedesktop.NetworkManager.IP4Config:Addresses, The "Addresses" property +
org.freedesktop.NetworkManager.IP4Config, org.freedesktop.NetworkManager.IP4Config
-
org.freedesktop.NetworkManager.IP4Config:DnsOptions, The "DnsOptions" property +
org.freedesktop.NetworkManager.IP4Config::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.IP4Config:DnsPriority, The "DnsPriority" property +
org.freedesktop.NetworkManager.IP4Config:AddressData, The "AddressData" property
-
org.freedesktop.NetworkManager.IP4Config:Domains, The "Domains" property +
org.freedesktop.NetworkManager.IP4Config:Addresses, The "Addresses" property
-
org.freedesktop.NetworkManager.IP4Config:Gateway, The "Gateway" property +
org.freedesktop.NetworkManager.IP4Config:DnsOptions, The "DnsOptions" property
-
org.freedesktop.NetworkManager.IP4Config:NameserverData, The "NameserverData" property +
org.freedesktop.NetworkManager.IP4Config:DnsPriority, The "DnsPriority" property
-
org.freedesktop.NetworkManager.IP4Config:Nameservers, The "Nameservers" property +
org.freedesktop.NetworkManager.IP4Config:Domains, The "Domains" property
-
org.freedesktop.NetworkManager.IP4Config:RouteData, The "RouteData" property +
org.freedesktop.NetworkManager.IP4Config:Gateway, The "Gateway" property
-
org.freedesktop.NetworkManager.IP4Config:Routes, The "Routes" property +
org.freedesktop.NetworkManager.IP4Config:NameserverData, The "NameserverData" property
-
org.freedesktop.NetworkManager.IP4Config:Searches, The "Searches" property +
org.freedesktop.NetworkManager.IP4Config:Nameservers, The "Nameservers" property
-
org.freedesktop.NetworkManager.IP4Config:WinsServerData, The "WinsServerData" property +
org.freedesktop.NetworkManager.IP4Config:RouteData, The "RouteData" property
-
org.freedesktop.NetworkManager.IP4Config:WinsServers, The "WinsServers" property +
org.freedesktop.NetworkManager.IP4Config:Routes, The "Routes" property
-
org.freedesktop.NetworkManager.IP6Config, org.freedesktop.NetworkManager.IP6Config +
org.freedesktop.NetworkManager.IP4Config:Searches, The "Searches" property
-
org.freedesktop.NetworkManager.IP6Config::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.IP4Config:WinsServerData, The "WinsServerData" property
-
org.freedesktop.NetworkManager.IP6Config:AddressData, The "AddressData" property +
org.freedesktop.NetworkManager.IP4Config:WinsServers, The "WinsServers" property
-
org.freedesktop.NetworkManager.IP6Config:Addresses, The "Addresses" property +
org.freedesktop.NetworkManager.IP6Config, org.freedesktop.NetworkManager.IP6Config
-
org.freedesktop.NetworkManager.IP6Config:DnsOptions, The "DnsOptions" property +
org.freedesktop.NetworkManager.IP6Config::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.IP6Config:DnsPriority, The "DnsPriority" property +
org.freedesktop.NetworkManager.IP6Config:AddressData, The "AddressData" property
-
org.freedesktop.NetworkManager.IP6Config:Domains, The "Domains" property +
org.freedesktop.NetworkManager.IP6Config:Addresses, The "Addresses" property
-
org.freedesktop.NetworkManager.IP6Config:Gateway, The "Gateway" property +
org.freedesktop.NetworkManager.IP6Config:DnsOptions, The "DnsOptions" property
-
org.freedesktop.NetworkManager.IP6Config:Nameservers, The "Nameservers" property +
org.freedesktop.NetworkManager.IP6Config:DnsPriority, The "DnsPriority" property
-
org.freedesktop.NetworkManager.IP6Config:RouteData, The "RouteData" property +
org.freedesktop.NetworkManager.IP6Config:Domains, The "Domains" property
-
org.freedesktop.NetworkManager.IP6Config:Routes, The "Routes" property +
org.freedesktop.NetworkManager.IP6Config:Gateway, The "Gateway" property
-
org.freedesktop.NetworkManager.IP6Config:Searches, The "Searches" property +
org.freedesktop.NetworkManager.IP6Config:Nameservers, The "Nameservers" property
-
org.freedesktop.NetworkManager.SecretAgent, org.freedesktop.NetworkManager.SecretAgent +
org.freedesktop.NetworkManager.IP6Config:RouteData, The "RouteData" property
-
org.freedesktop.NetworkManager.SecretAgent.CancelGetSecrets(), The CancelGetSecrets() method +
org.freedesktop.NetworkManager.IP6Config:Routes, The "Routes" property
-
org.freedesktop.NetworkManager.SecretAgent.DeleteSecrets(), The DeleteSecrets() method +
org.freedesktop.NetworkManager.IP6Config:Searches, The "Searches" property
-
org.freedesktop.NetworkManager.SecretAgent.GetSecrets(), The GetSecrets() method +
org.freedesktop.NetworkManager.SecretAgent, org.freedesktop.NetworkManager.SecretAgent
-
org.freedesktop.NetworkManager.SecretAgent.SaveSecrets(), The SaveSecrets() method +
org.freedesktop.NetworkManager.SecretAgent.CancelGetSecrets(), The CancelGetSecrets() method
-
org.freedesktop.NetworkManager.Settings, org.freedesktop.NetworkManager.Settings +
org.freedesktop.NetworkManager.SecretAgent.DeleteSecrets(), The DeleteSecrets() method
-
org.freedesktop.NetworkManager.Settings.AddConnection(), The AddConnection() method +
org.freedesktop.NetworkManager.SecretAgent.GetSecrets(), The GetSecrets() method
-
org.freedesktop.NetworkManager.Settings.AddConnectionUnsaved(), The AddConnectionUnsaved() method +
org.freedesktop.NetworkManager.SecretAgent.SaveSecrets(), The SaveSecrets() method
-
org.freedesktop.NetworkManager.Settings.Connection, org.freedesktop.NetworkManager.Settings.Connection +
org.freedesktop.NetworkManager.Settings, org.freedesktop.NetworkManager.Settings
-
org.freedesktop.NetworkManager.Settings.Connection.ClearSecrets(), The ClearSecrets() method +
org.freedesktop.NetworkManager.Settings.AddConnection(), The AddConnection() method
-
org.freedesktop.NetworkManager.Settings.Connection.Delete(), The Delete() method +
org.freedesktop.NetworkManager.Settings.AddConnection2(), The AddConnection2() method
-
org.freedesktop.NetworkManager.Settings.Connection.GetSecrets(), The GetSecrets() method +
org.freedesktop.NetworkManager.Settings.AddConnectionUnsaved(), The AddConnectionUnsaved() method
-
org.freedesktop.NetworkManager.Settings.Connection.GetSettings(), The GetSettings() method +
org.freedesktop.NetworkManager.Settings.Connection, org.freedesktop.NetworkManager.Settings.Connection
-
org.freedesktop.NetworkManager.Settings.Connection.Save(), The Save() method +
org.freedesktop.NetworkManager.Settings.Connection.ClearSecrets(), The ClearSecrets() method
-
org.freedesktop.NetworkManager.Settings.Connection.Update(), The Update() method +
org.freedesktop.NetworkManager.Settings.Connection.Delete(), The Delete() method
-
org.freedesktop.NetworkManager.Settings.Connection.Update2(), The Update2() method +
org.freedesktop.NetworkManager.Settings.Connection.GetSecrets(), The GetSecrets() method
-
org.freedesktop.NetworkManager.Settings.Connection.UpdateUnsaved(), The UpdateUnsaved() method +
org.freedesktop.NetworkManager.Settings.Connection.GetSettings(), The GetSettings() method
-
org.freedesktop.NetworkManager.Settings.Connection::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Settings.Connection.Save(), The Save() method
-
org.freedesktop.NetworkManager.Settings.Connection::Removed, The "Removed" signal +
org.freedesktop.NetworkManager.Settings.Connection.Update(), The Update() method
-
org.freedesktop.NetworkManager.Settings.Connection::Updated, The "Updated" signal +
org.freedesktop.NetworkManager.Settings.Connection.Update2(), The Update2() method
-
org.freedesktop.NetworkManager.Settings.Connection:Filename, The "Filename" property +
org.freedesktop.NetworkManager.Settings.Connection.UpdateUnsaved(), The UpdateUnsaved() method
-
org.freedesktop.NetworkManager.Settings.Connection:Flags, The "Flags" property +
org.freedesktop.NetworkManager.Settings.Connection::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Settings.Connection:Unsaved, The "Unsaved" property +
org.freedesktop.NetworkManager.Settings.Connection::Removed, The "Removed" signal
-
org.freedesktop.NetworkManager.Settings.GetConnectionByUuid(), The GetConnectionByUuid() method +
org.freedesktop.NetworkManager.Settings.Connection::Updated, The "Updated" signal
-
org.freedesktop.NetworkManager.Settings.ListConnections(), The ListConnections() method +
org.freedesktop.NetworkManager.Settings.Connection:Filename, The "Filename" property
-
org.freedesktop.NetworkManager.Settings.LoadConnections(), The LoadConnections() method +
org.freedesktop.NetworkManager.Settings.Connection:Flags, The "Flags" property
-
org.freedesktop.NetworkManager.Settings.ReloadConnections(), The ReloadConnections() method +
org.freedesktop.NetworkManager.Settings.Connection:Unsaved, The "Unsaved" property
-
org.freedesktop.NetworkManager.Settings.SaveHostname(), The SaveHostname() method +
org.freedesktop.NetworkManager.Settings.GetConnectionByUuid(), The GetConnectionByUuid() method
-
org.freedesktop.NetworkManager.Settings::ConnectionRemoved, The "ConnectionRemoved" signal +
org.freedesktop.NetworkManager.Settings.ListConnections(), The ListConnections() method
-
org.freedesktop.NetworkManager.Settings::NewConnection, The "NewConnection" signal +
org.freedesktop.NetworkManager.Settings.LoadConnections(), The LoadConnections() method
-
org.freedesktop.NetworkManager.Settings::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Settings.ReloadConnections(), The ReloadConnections() method
-
org.freedesktop.NetworkManager.Settings:CanModify, The "CanModify" property +
org.freedesktop.NetworkManager.Settings.SaveHostname(), The SaveHostname() method
-
org.freedesktop.NetworkManager.Settings:Connections, The "Connections" property +
org.freedesktop.NetworkManager.Settings::ConnectionRemoved, The "ConnectionRemoved" signal
-
org.freedesktop.NetworkManager.Settings:Hostname, The "Hostname" property +
org.freedesktop.NetworkManager.Settings::NewConnection, The "NewConnection" signal +
+
org.freedesktop.NetworkManager.Settings::PropertiesChanged, The "PropertiesChanged" signal +
+
org.freedesktop.NetworkManager.Settings:CanModify, The "CanModify" property +
+
org.freedesktop.NetworkManager.Settings:Connections, The "Connections" property +
+
org.freedesktop.NetworkManager.Settings:Hostname, The "Hostname" property

A

-
org.freedesktop.NetworkManager.Connection.Active, org.freedesktop.NetworkManager.Connection.Active +
org.freedesktop.NetworkManager.Connection.Active, org.freedesktop.NetworkManager.Connection.Active
-
org.freedesktop.NetworkManager.Connection.Active::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Connection.Active::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Connection.Active::StateChanged, The "StateChanged" signal +
org.freedesktop.NetworkManager.Connection.Active::StateChanged, The "StateChanged" signal
-
org.freedesktop.NetworkManager.Connection.Active:Connection, The "Connection" property +
org.freedesktop.NetworkManager.Connection.Active:Connection, The "Connection" property
-
org.freedesktop.NetworkManager.Connection.Active:Default, The "Default" property +
org.freedesktop.NetworkManager.Connection.Active:Default, The "Default" property
-
org.freedesktop.NetworkManager.Connection.Active:Default6, The "Default6" property +
org.freedesktop.NetworkManager.Connection.Active:Default6, The "Default6" property
-
org.freedesktop.NetworkManager.Connection.Active:Devices, The "Devices" property +
org.freedesktop.NetworkManager.Connection.Active:Devices, The "Devices" property
-
org.freedesktop.NetworkManager.Connection.Active:Dhcp4Config, The "Dhcp4Config" property +
org.freedesktop.NetworkManager.Connection.Active:Dhcp4Config, The "Dhcp4Config" property
-
org.freedesktop.NetworkManager.Connection.Active:Dhcp6Config, The "Dhcp6Config" property +
org.freedesktop.NetworkManager.Connection.Active:Dhcp6Config, The "Dhcp6Config" property
-
org.freedesktop.NetworkManager.Connection.Active:Id, The "Id" property +
org.freedesktop.NetworkManager.Connection.Active:Id, The "Id" property
-
org.freedesktop.NetworkManager.Connection.Active:Ip4Config, The "Ip4Config" property +
org.freedesktop.NetworkManager.Connection.Active:Ip4Config, The "Ip4Config" property
-
org.freedesktop.NetworkManager.Connection.Active:Ip6Config, The "Ip6Config" property +
org.freedesktop.NetworkManager.Connection.Active:Ip6Config, The "Ip6Config" property
-
org.freedesktop.NetworkManager.Connection.Active:Master, The "Master" property +
org.freedesktop.NetworkManager.Connection.Active:Master, The "Master" property
-
org.freedesktop.NetworkManager.Connection.Active:SpecificObject, The "SpecificObject" property +
org.freedesktop.NetworkManager.Connection.Active:SpecificObject, The "SpecificObject" property
-
org.freedesktop.NetworkManager.Connection.Active:State, The "State" property +
org.freedesktop.NetworkManager.Connection.Active:State, The "State" property
-
org.freedesktop.NetworkManager.Connection.Active:StateFlags, The "StateFlags" property +
org.freedesktop.NetworkManager.Connection.Active:StateFlags, The "StateFlags" property
-
org.freedesktop.NetworkManager.Connection.Active:Type, The "Type" property +
org.freedesktop.NetworkManager.Connection.Active:Type, The "Type" property
-
org.freedesktop.NetworkManager.Connection.Active:Uuid, The "Uuid" property +
org.freedesktop.NetworkManager.Connection.Active:Uuid, The "Uuid" property
-
org.freedesktop.NetworkManager.Connection.Active:Vpn, The "Vpn" property +
org.freedesktop.NetworkManager.Connection.Active:Vpn, The "Vpn" property
-
addr-gen-mode, ipv6 +
addr-gen-mode, ipv6
-
address-data, ipv4, ipv6 +
address-data, ipv4, ipv6
-
addresses, ipv4, ipv6 +
addresses, ipv4, ipv6
-
ageing, vxlan +
ageing, vxlan
-
ageing-time, bridge +
ageing-time, bridge
-
altsubject-matches, 802-1x +
altsubject-matches, 802-1x
-
anonymous-identity, 802-1x +
anonymous-identity, 802-1x
-
apn, gsm +
apn, gsm
-
app-fcoe-flags, dcb +
app-fcoe-flags, dcb
-
app-fcoe-mode, dcb +
app-fcoe-mode, dcb
-
app-fcoe-priority, dcb +
app-fcoe-priority, dcb
-
app-fip-flags, dcb +
app-fip-flags, dcb
-
app-fip-priority, dcb +
app-fip-priority, dcb
-
app-iscsi-flags, dcb +
app-iscsi-flags, dcb
-
app-iscsi-priority, dcb +
app-iscsi-priority, dcb
-
assigned-mac-address, 802-3-ethernet, 802-11-wireless +
assigned-mac-address, 802-3-ethernet, 802-11-wireless
-
auth-alg, 802-11-wireless-security +
auth-alg, 802-11-wireless-security
-
auth-retries, connection +
auth-retries, connection
-
auth-timeout, 802-1x +
auth-timeout, 802-1x
-
auto-negotiate, 802-3-ethernet +
auto-negotiate, 802-3-ethernet
-
autoconnect, connection +
autoconnect, connection
-
autoconnect-priority, connection +
autoconnect-priority, connection
-
autoconnect-retries, connection +
autoconnect-retries, connection
-
autoconnect-slaves, connection +
autoconnect-slaves, connection
-
autoprobe-drivers, sriov +
autoprobe-drivers, sriov

B

-
band, 802-11-wireless +
band, 802-11-wireless
-
baud, ppp, serial +
baud, ppp, serial
-
bdaddr, bluetooth +
bdaddr, bluetooth
-
bits, serial +
bits, serial
-
bond-downdelay, ovs-port +
bond-downdelay, ovs-port
-
bond-mode, ovs-port +
bond-mode, ovs-port
-
bond-updelay, ovs-port +
bond-updelay, ovs-port
-
browser-only, proxy +
browser-only, proxy
-
bssid, 802-11-wireless +
bssid, 802-11-wireless

C

-
ca-cert, 802-1x +
ca-cert, 802-1x
-
ca-cert-password, 802-1x +
ca-cert-password, 802-1x
-
ca-cert-password-flags, 802-1x +
ca-cert-password-flags, 802-1x
-
ca-path, 802-1x +
ca-path, 802-1x
-
channel, 802-11-olpc-mesh, 802-11-wireless, wpan +
channel, 802-11-olpc-mesh, 802-11-wireless, wpan
-
org.freedesktop.NetworkManager.Checkpoint, org.freedesktop.NetworkManager.Checkpoint +
org.freedesktop.NetworkManager.Checkpoint, org.freedesktop.NetworkManager.Checkpoint
-
org.freedesktop.NetworkManager.Checkpoint::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Checkpoint::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Checkpoint:Created, The "Created" property +
org.freedesktop.NetworkManager.Checkpoint:Created, The "Created" property
-
org.freedesktop.NetworkManager.Checkpoint:Devices, The "Devices" property +
org.freedesktop.NetworkManager.Checkpoint:Devices, The "Devices" property
-
org.freedesktop.NetworkManager.Checkpoint:RollbackTimeout, The "RollbackTimeout" property +
org.freedesktop.NetworkManager.Checkpoint:RollbackTimeout, The "RollbackTimeout" property
-
client-cert, 802-1x +
client-cert, 802-1x
-
client-cert-password, 802-1x +
client-cert-password, 802-1x
-
client-cert-password-flags, 802-1x +
client-cert-password-flags, 802-1x
-
cloned-mac-address, 802-3-ethernet, 802-11-wireless +
cloned-mac-address, 802-3-ethernet, 802-11-wireless
-
config, team, team-port +
config, team, team-port
-
crtscts, ppp +
crtscts, ppp

D

-
dad-timeout, ipv4, ipv6 +
dad-timeout, ipv4, ipv6 +
+
data, user, vpn +
+
datapath-type, ovs-bridge
-
data, user, vpn +
destination-port, vxlan
-
destination-port, vxlan +
devargs, ovs-dpdk
-
device-id, gsm +
device-id, gsm
-
org.freedesktop.NetworkManager.Device.Wired, org.freedesktop.NetworkManager.Device.Wired +
org.freedesktop.NetworkManager.Device.Wired, org.freedesktop.NetworkManager.Device.Wired
-
org.freedesktop.NetworkManager.Device.Wired::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Wired::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Wired:Carrier, The "Carrier" property +
org.freedesktop.NetworkManager.Device.Wired:Carrier, The "Carrier" property
-
org.freedesktop.NetworkManager.Device.Wired:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Wired:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Wired:PermHwAddress, The "PermHwAddress" property +
org.freedesktop.NetworkManager.Device.Wired:PermHwAddress, The "PermHwAddress" property
-
org.freedesktop.NetworkManager.Device.Wired:S390Subchannels, The "S390Subchannels" property +
org.freedesktop.NetworkManager.Device.Wired:S390Subchannels, The "S390Subchannels" property
-
org.freedesktop.NetworkManager.Device.Wired:Speed, The "Speed" property +
org.freedesktop.NetworkManager.Device.Wired:Speed, The "Speed" property
-
org.freedesktop.NetworkManager.Device.Wireless, org.freedesktop.NetworkManager.Device.Wireless +
org.freedesktop.NetworkManager.Device.Wireless, org.freedesktop.NetworkManager.Device.Wireless
-
org.freedesktop.NetworkManager.Device.Wireless.GetAccessPoints(), The GetAccessPoints() method +
org.freedesktop.NetworkManager.Device.Wireless.GetAccessPoints(), The GetAccessPoints() method
-
org.freedesktop.NetworkManager.Device.Wireless.GetAllAccessPoints(), The GetAllAccessPoints() method +
org.freedesktop.NetworkManager.Device.Wireless.GetAllAccessPoints(), The GetAllAccessPoints() method
-
org.freedesktop.NetworkManager.Device.Wireless.RequestScan(), The RequestScan() method +
org.freedesktop.NetworkManager.Device.Wireless.RequestScan(), The RequestScan() method
-
org.freedesktop.NetworkManager.Device.Wireless::AccessPointAdded, The "AccessPointAdded" signal +
org.freedesktop.NetworkManager.Device.Wireless::AccessPointAdded, The "AccessPointAdded" signal
-
org.freedesktop.NetworkManager.Device.Wireless::AccessPointRemoved, The "AccessPointRemoved" signal +
org.freedesktop.NetworkManager.Device.Wireless::AccessPointRemoved, The "AccessPointRemoved" signal
-
org.freedesktop.NetworkManager.Device.Wireless::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.Device.Wireless::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.Device.Wireless:AccessPoints, The "AccessPoints" property +
org.freedesktop.NetworkManager.Device.Wireless:AccessPoints, The "AccessPoints" property
-
org.freedesktop.NetworkManager.Device.Wireless:ActiveAccessPoint, The "ActiveAccessPoint" property +
org.freedesktop.NetworkManager.Device.Wireless:ActiveAccessPoint, The "ActiveAccessPoint" property
-
org.freedesktop.NetworkManager.Device.Wireless:Bitrate, The "Bitrate" property +
org.freedesktop.NetworkManager.Device.Wireless:Bitrate, The "Bitrate" property
-
org.freedesktop.NetworkManager.Device.Wireless:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.Wireless:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.Wireless:LastScan, The "LastScan" property +
org.freedesktop.NetworkManager.Device.Wireless:LastScan, The "LastScan" property
-
org.freedesktop.NetworkManager.Device.Wireless:Mode, The "Mode" property +
org.freedesktop.NetworkManager.Device.Wireless:Mode, The "Mode" property
-
org.freedesktop.NetworkManager.Device.Wireless:PermHwAddress, The "PermHwAddress" property +
org.freedesktop.NetworkManager.Device.Wireless:PermHwAddress, The "PermHwAddress" property
-
org.freedesktop.NetworkManager.Device.Wireless:WirelessCapabilities, The "WirelessCapabilities" property +
org.freedesktop.NetworkManager.Device.Wireless:WirelessCapabilities, The "WirelessCapabilities" property
-
org.freedesktop.NetworkManager.Device.WifiP2P, org.freedesktop.NetworkManager.Device.WifiP2P +
org.freedesktop.NetworkManager.Device.WifiP2P, org.freedesktop.NetworkManager.Device.WifiP2P
-
org.freedesktop.NetworkManager.Device.WifiP2P.StartFind(), The StartFind() method +
org.freedesktop.NetworkManager.Device.WifiP2P.StartFind(), The StartFind() method
-
org.freedesktop.NetworkManager.Device.WifiP2P.StopFind(), The StopFind() method +
org.freedesktop.NetworkManager.Device.WifiP2P.StopFind(), The StopFind() method
-
org.freedesktop.NetworkManager.Device.WifiP2P::PeerAdded, The "PeerAdded" signal +
org.freedesktop.NetworkManager.Device.WifiP2P::PeerAdded, The "PeerAdded" signal
-
org.freedesktop.NetworkManager.Device.WifiP2P::PeerRemoved, The "PeerRemoved" signal +
org.freedesktop.NetworkManager.Device.WifiP2P::PeerRemoved, The "PeerRemoved" signal
-
org.freedesktop.NetworkManager.Device.WifiP2P:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.Device.WifiP2P:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.Device.WifiP2P:Peers, The "Peers" property +
org.freedesktop.NetworkManager.Device.WifiP2P:Peers, The "Peers" property
-
dhcp-anycast-address, 802-11-olpc-mesh +
dhcp-anycast-address, 802-11-olpc-mesh
-
dhcp-client-id, ipv4 +
dhcp-client-id, ipv4
-
dhcp-duid, ipv6 +
dhcp-duid, ipv6
-
dhcp-fqdn, ipv4 +
dhcp-fqdn, ipv4
-
dhcp-hostname, ipv4, ipv6 +
dhcp-hostname, ipv4, ipv6
-
dhcp-send-hostname, ipv4, ipv6 +
dhcp-send-hostname, ipv4, ipv6
-
dhcp-timeout, ipv4, ipv6 +
dhcp-timeout, ipv4, ipv6
-
org.freedesktop.NetworkManager.DHCP4Config, org.freedesktop.NetworkManager.DHCP4Config +
org.freedesktop.NetworkManager.DHCP4Config, org.freedesktop.NetworkManager.DHCP4Config
-
org.freedesktop.NetworkManager.DHCP4Config::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.DHCP4Config::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.DHCP4Config:Options, The "Options" property +
org.freedesktop.NetworkManager.DHCP4Config:Options, The "Options" property
-
org.freedesktop.NetworkManager.DHCP6Config, org.freedesktop.NetworkManager.DHCP6Config +
org.freedesktop.NetworkManager.DHCP6Config, org.freedesktop.NetworkManager.DHCP6Config
-
org.freedesktop.NetworkManager.DHCP6Config::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.DHCP6Config::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.DHCP6Config:Options, The "Options" property +
org.freedesktop.NetworkManager.DHCP6Config:Options, The "Options" property
-
dns, ipv4, ipv6 +
dns, ipv4, ipv6
-
dns-options, ipv4, ipv6 +
dns-options, ipv4, ipv6
-
dns-priority, ipv4, ipv6 +
dns-priority, ipv4, ipv6
-
dns-search, ipv4, ipv6 +
dns-search, ipv4, ipv6
-
domain-suffix-match, 802-1x +
domain-suffix-match, 802-1x
-
duplex, 802-3-ethernet +
duplex, 802-3-ethernet

E

-
eap, 802-1x +
eap, 802-1x
-
egress-priority-map, vlan +
egress-priority-map, vlan
-
encapsulation, adsl +
encapsulation, adsl
-
encapsulation-limit, ip-tunnel +
encapsulation-limit, ip-tunnel
-
encrypt, macsec +
encrypt, macsec

F

-
fail-mode, ovs-bridge +
fail-mode, ovs-bridge
-
fils, 802-11-wireless-security +
fils, 802-11-wireless-security
-
flags, ip-tunnel, vlan +
flags, ip-tunnel, vlan
-
flow-label, ip-tunnel +
flow-label, ip-tunnel
-
forward-delay, bridge +
forward-delay, bridge
-
fwmark, wireguard +
fwmark, wireguard

G

-
gateway, ipv4, ipv6 +
gateway, ipv4, ipv6
-
gateway-ping-timeout, connection +
gateway-ping-timeout, connection
-
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless +
generate-mac-address-mask, 802-3-ethernet, 802-11-wireless
-
group, tun, 802-11-wireless-security +
group, tun, 802-11-wireless-security
-
group-forward-mask, bridge +
group-forward-mask, bridge

H

-
hairpin-mode, bridge-port +
hairpin-mode, bridge-port
-
hello-time, bridge +
hello-time, bridge
-
hidden, 802-11-wireless +
hidden, 802-11-wireless
-
home-only, gsm +
home-only, gsm

I

-
id, connection, vlan, vxlan +
id, connection, vlan, vxlan
-
identity, 802-1x +
identity, 802-1x
-
ignore-auto-dns, ipv4, ipv6 +
ignore-auto-dns, ipv4, ipv6
-
ignore-auto-routes, ipv4, ipv6 +
ignore-auto-routes, ipv4, ipv6
-
ingress-priority-map, vlan +
ingress-priority-map, vlan
-
input-key, ip-tunnel +
input-key, ip-tunnel
-
interface-name, connection, bond, bridge, match, team, vlan +
interface-name, connection, bond, bridge, match, team, vlan
-
ip6-privacy, ipv6 +
ip4-auto-default-route, wireguard +
+
ip6-auto-default-route, wireguard +
+
ip6-privacy, ipv6

K

-
key-mgmt, 802-11-wireless-security +
key-mgmt, 802-11-wireless-security

L

-
l2-miss, vxlan +
l2-miss, vxlan
-
l3-miss, vxlan +
l3-miss, vxlan
-
lacp, ovs-port +
lacp, ovs-port
-
lacp-key, team-port +
lacp-key, team-port
-
lacp-prio, team-port +
lacp-prio, team-port
-
lcp-echo-failure, ppp +
lcp-echo-failure, ppp
-
lcp-echo-interval, ppp +
lcp-echo-interval, ppp
-
leap-password, 802-11-wireless-security +
leap-password, 802-11-wireless-security
-
leap-password-flags, 802-11-wireless-security +
leap-password-flags, 802-11-wireless-security
-
leap-username, 802-11-wireless-security +
leap-username, 802-11-wireless-security
-
learning, vxlan +
learning, vxlan
-
limit, vxlan +
limit, vxlan
-
link-watchers, team, team-port +
link-watchers, team, team-port
-
listen-port, wireguard +
listen-port, wireguard
-
lldp, connection +
lldp, connection
-
llmnr, connection +
llmnr, connection
-
local, ip-tunnel, vxlan +
local, ip-tunnel, vxlan

M

-
mac-address, bridge, infiniband, wimax, 802-3-ethernet, 802-11-wireless, wpan +
mac-address, bridge, infiniband, wimax, 802-3-ethernet, 802-11-wireless, wpan +
+
mac-address-blacklist, 802-3-ethernet, 802-11-wireless
-
mac-address-blacklist, 802-3-ethernet, 802-11-wireless +
mac-address-randomization, 802-11-wireless
-
mac-address-randomization, 802-11-wireless +
org.freedesktop.NetworkManager, org.freedesktop.NetworkManager
-
org.freedesktop.NetworkManager, org.freedesktop.NetworkManager +
org.freedesktop.NetworkManager.ActivateConnection(), The ActivateConnection() method
-
org.freedesktop.NetworkManager.ActivateConnection(), The ActivateConnection() method +
org.freedesktop.NetworkManager.AddAndActivateConnection(), The AddAndActivateConnection() method
-
org.freedesktop.NetworkManager.AddAndActivateConnection(), The AddAndActivateConnection() method +
org.freedesktop.NetworkManager.AddAndActivateConnection2(), The AddAndActivateConnection2() method
-
org.freedesktop.NetworkManager.AddAndActivateConnection2(), The AddAndActivateConnection2() method +
org.freedesktop.NetworkManager.CheckConnectivity(), The CheckConnectivity() method
-
org.freedesktop.NetworkManager.CheckConnectivity(), The CheckConnectivity() method +
org.freedesktop.NetworkManager.CheckpointAdjustRollbackTimeout(), The CheckpointAdjustRollbackTimeout() method
-
org.freedesktop.NetworkManager.CheckpointAdjustRollbackTimeout(), The CheckpointAdjustRollbackTimeout() method +
org.freedesktop.NetworkManager.CheckpointCreate(), The CheckpointCreate() method
-
org.freedesktop.NetworkManager.CheckpointCreate(), The CheckpointCreate() method +
org.freedesktop.NetworkManager.CheckpointDestroy(), The CheckpointDestroy() method
-
org.freedesktop.NetworkManager.CheckpointDestroy(), The CheckpointDestroy() method +
org.freedesktop.NetworkManager.CheckpointRollback(), The CheckpointRollback() method
-
org.freedesktop.NetworkManager.CheckpointRollback(), The CheckpointRollback() method +
org.freedesktop.NetworkManager.DeactivateConnection(), The DeactivateConnection() method
-
org.freedesktop.NetworkManager.DeactivateConnection(), The DeactivateConnection() method +
org.freedesktop.NetworkManager.Enable(), The Enable() method
-
org.freedesktop.NetworkManager.Enable(), The Enable() method +
org.freedesktop.NetworkManager.GetAllDevices(), The GetAllDevices() method
-
org.freedesktop.NetworkManager.GetAllDevices(), The GetAllDevices() method +
org.freedesktop.NetworkManager.GetDeviceByIpIface(), The GetDeviceByIpIface() method
-
org.freedesktop.NetworkManager.GetDeviceByIpIface(), The GetDeviceByIpIface() method +
org.freedesktop.NetworkManager.GetDevices(), The GetDevices() method
-
org.freedesktop.NetworkManager.GetDevices(), The GetDevices() method +
org.freedesktop.NetworkManager.GetLogging(), The GetLogging() method
-
org.freedesktop.NetworkManager.GetLogging(), The GetLogging() method +
org.freedesktop.NetworkManager.GetPermissions(), The GetPermissions() method
-
org.freedesktop.NetworkManager.GetPermissions(), The GetPermissions() method +
org.freedesktop.NetworkManager.Reload(), The Reload() method
-
org.freedesktop.NetworkManager.Reload(), The Reload() method +
org.freedesktop.NetworkManager.SetLogging(), The SetLogging() method
-
org.freedesktop.NetworkManager.SetLogging(), The SetLogging() method +
org.freedesktop.NetworkManager.Sleep(), The Sleep() method
-
org.freedesktop.NetworkManager.Sleep(), The Sleep() method +
org.freedesktop.NetworkManager.state(), The state() method
-
org.freedesktop.NetworkManager.state(), The state() method +
org.freedesktop.NetworkManager::CheckPermissions, The "CheckPermissions" signal
-
org.freedesktop.NetworkManager::CheckPermissions, The "CheckPermissions" signal +
org.freedesktop.NetworkManager::DeviceAdded, The "DeviceAdded" signal
-
org.freedesktop.NetworkManager::DeviceAdded, The "DeviceAdded" signal +
org.freedesktop.NetworkManager::DeviceRemoved, The "DeviceRemoved" signal
-
org.freedesktop.NetworkManager::DeviceRemoved, The "DeviceRemoved" signal +
org.freedesktop.NetworkManager::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager::StateChanged, The "StateChanged" signal
-
org.freedesktop.NetworkManager::StateChanged, The "StateChanged" signal +
org.freedesktop.NetworkManager:ActivatingConnection, The "ActivatingConnection" property
-
org.freedesktop.NetworkManager:ActivatingConnection, The "ActivatingConnection" property +
org.freedesktop.NetworkManager:ActiveConnections, The "ActiveConnections" property
-
org.freedesktop.NetworkManager:ActiveConnections, The "ActiveConnections" property +
org.freedesktop.NetworkManager:AllDevices, The "AllDevices" property
-
org.freedesktop.NetworkManager:AllDevices, The "AllDevices" property +
org.freedesktop.NetworkManager:Capabilities, The "Capabilities" property
-
org.freedesktop.NetworkManager:Capabilities, The "Capabilities" property +
org.freedesktop.NetworkManager:Checkpoints, The "Checkpoints" property
-
org.freedesktop.NetworkManager:Checkpoints, The "Checkpoints" property +
org.freedesktop.NetworkManager:Connectivity, The "Connectivity" property
-
org.freedesktop.NetworkManager:Connectivity, The "Connectivity" property +
org.freedesktop.NetworkManager:ConnectivityCheckAvailable, The "ConnectivityCheckAvailable" property
-
org.freedesktop.NetworkManager:ConnectivityCheckAvailable, The "ConnectivityCheckAvailable" property +
org.freedesktop.NetworkManager:ConnectivityCheckEnabled, The "ConnectivityCheckEnabled" property
-
org.freedesktop.NetworkManager:ConnectivityCheckEnabled, The "ConnectivityCheckEnabled" property +
org.freedesktop.NetworkManager:ConnectivityCheckUri, The "ConnectivityCheckUri" property
-
org.freedesktop.NetworkManager:Devices, The "Devices" property +
org.freedesktop.NetworkManager:Devices, The "Devices" property
-
org.freedesktop.NetworkManager:GlobalDnsConfiguration, The "GlobalDnsConfiguration" property +
org.freedesktop.NetworkManager:GlobalDnsConfiguration, The "GlobalDnsConfiguration" property
-
org.freedesktop.NetworkManager:Metered, The "Metered" property +
org.freedesktop.NetworkManager:Metered, The "Metered" property
-
org.freedesktop.NetworkManager:NetworkingEnabled, The "NetworkingEnabled" property +
org.freedesktop.NetworkManager:NetworkingEnabled, The "NetworkingEnabled" property
-
org.freedesktop.NetworkManager:PrimaryConnection, The "PrimaryConnection" property +
org.freedesktop.NetworkManager:PrimaryConnection, The "PrimaryConnection" property
-
org.freedesktop.NetworkManager:PrimaryConnectionType, The "PrimaryConnectionType" property +
org.freedesktop.NetworkManager:PrimaryConnectionType, The "PrimaryConnectionType" property
-
org.freedesktop.NetworkManager:Startup, The "Startup" property +
org.freedesktop.NetworkManager:Startup, The "Startup" property
-
org.freedesktop.NetworkManager:State, The "State" property +
org.freedesktop.NetworkManager:State, The "State" property
-
org.freedesktop.NetworkManager:Version, The "Version" property +
org.freedesktop.NetworkManager:Version, The "Version" property
-
org.freedesktop.NetworkManager:WimaxEnabled, The "WimaxEnabled" property +
org.freedesktop.NetworkManager:WimaxEnabled, The "WimaxEnabled" property
-
org.freedesktop.NetworkManager:WimaxHardwareEnabled, The "WimaxHardwareEnabled" property +
org.freedesktop.NetworkManager:WimaxHardwareEnabled, The "WimaxHardwareEnabled" property
-
org.freedesktop.NetworkManager:WirelessEnabled, The "WirelessEnabled" property +
org.freedesktop.NetworkManager:WirelessEnabled, The "WirelessEnabled" property
-
org.freedesktop.NetworkManager:WirelessHardwareEnabled, The "WirelessHardwareEnabled" property +
org.freedesktop.NetworkManager:WirelessHardwareEnabled, The "WirelessHardwareEnabled" property
-
org.freedesktop.NetworkManager:WwanEnabled, The "WwanEnabled" property +
org.freedesktop.NetworkManager:WwanEnabled, The "WwanEnabled" property
-
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property +
org.freedesktop.NetworkManager:WwanHardwareEnabled, The "WwanHardwareEnabled" property
-
master, connection +
master, connection
-
max-age, bridge +
max-age, bridge
-
may-fail, ipv4, ipv6 +
may-fail, ipv4, ipv6
-
mcast-rejoin-count, team +
mcast-rejoin-count, team
-
mcast-rejoin-interval, team +
mcast-rejoin-interval, team
-
mcast-snooping-enable, ovs-bridge +
mcast-snooping-enable, ovs-bridge
-
mdns, connection +
mdns, connection
-
metered, connection +
metered, connection
-
method, ipv4, ipv6, proxy +
method, ipv4, ipv6, proxy
-
mka-cak, macsec +
mka-cak, macsec
-
mka-cak-flags, macsec +
mka-cak-flags, macsec
-
mka-ckn, macsec +
mka-ckn, macsec
-
mode, ip-tunnel, macsec, macvlan, tun, 802-11-wireless +
mode, ip-tunnel, macsec, macvlan, tun, 802-11-wireless
-
mppe-stateful, ppp +
mppe-stateful, ppp
-
mru, ppp +
mru, ppp
-
mtu, cdma, gsm, infiniband, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless +
mtu, cdma, gsm, infiniband, ip-tunnel, ppp, 802-3-ethernet, wireguard, 802-11-wireless
-
multi-connect, connection +
multi-connect, connection
-
multi-queue, tun +
multi-queue, tun
-
multicast-snooping, bridge +
multicast-snooping, bridge

N

-
network-id, gsm +
network-id, gsm
-
network-name, wimax +
network-name, wimax
-
never-default, ipv4, ipv6 +
never-default, ipv4, ipv6
-
NM80211ApFlags, enum NM80211ApFlags +
NM80211ApFlags, enum NM80211ApFlags
-
NM80211ApSecurityFlags, enum NM80211ApSecurityFlags +
NM80211ApSecurityFlags, enum NM80211ApSecurityFlags
-
NM80211Mode, enum NM80211Mode +
NM80211Mode, enum NM80211Mode
-
NMActivationStateFlags, enum NMActivationStateFlags +
NMActivationStateFlags, enum NMActivationStateFlags
-
NMActiveConnectionState, enum NMActiveConnectionState +
NMActiveConnectionState, enum NMActiveConnectionState
-
NMActiveConnectionStateReason, enum NMActiveConnectionStateReason +
NMActiveConnectionStateReason, enum NMActiveConnectionStateReason
-
NMBluetoothCapabilities, enum NMBluetoothCapabilities +
NMBluetoothCapabilities, enum NMBluetoothCapabilities
-
NMCapability, enum NMCapability +
NMCapability, enum NMCapability
-
NMCheckpointCreateFlags, enum NMCheckpointCreateFlags +
NMCheckpointCreateFlags, enum NMCheckpointCreateFlags
-
NMConnectionMultiConnect, enum NMConnectionMultiConnect +
NMConnectionMultiConnect, enum NMConnectionMultiConnect
-
NMConnectivityState, enum NMConnectivityState +
NMConnectivityState, enum NMConnectivityState
-
NMDeviceCapabilities, enum NMDeviceCapabilities +
NMDeviceCapabilities, enum NMDeviceCapabilities
-
NMDeviceModemCapabilities, enum NMDeviceModemCapabilities +
NMDeviceModemCapabilities, enum NMDeviceModemCapabilities
-
NMDeviceState, enum NMDeviceState +
NMDeviceState, enum NMDeviceState
-
NMDeviceStateReason, enum NMDeviceStateReason +
NMDeviceStateReason, enum NMDeviceStateReason
-
NMDeviceType, enum NMDeviceType +
NMDeviceType, enum NMDeviceType
-
NMDeviceWifiCapabilities, enum NMDeviceWifiCapabilities +
NMDeviceWifiCapabilities, enum NMDeviceWifiCapabilities
-
NMIPTunnelMode, enum NMIPTunnelMode +
NMIPTunnelMode, enum NMIPTunnelMode
-
NMMetered, enum NMMetered +
NMMetered, enum NMMetered
-
NMRollbackResult, enum NMRollbackResult +
NMRollbackResult, enum NMRollbackResult
-
NMSecretAgentCapabilities, enum NMSecretAgentCapabilities +
NMSecretAgentCapabilities, enum NMSecretAgentCapabilities
-
NMSecretAgentGetSecretsFlags, enum NMSecretAgentGetSecretsFlags +
NMSecretAgentGetSecretsFlags, enum NMSecretAgentGetSecretsFlags
-
NMSettingsConnectionFlags, enum NMSettingsConnectionFlags +
NMSettingsAddConnection2Flags, enum NMSettingsAddConnection2Flags
-
NMSettingsUpdate2Flags, enum NMSettingsUpdate2Flags +
NMSettingsConnectionFlags, enum NMSettingsConnectionFlags
-
NMState, enum NMState +
NMSettingsUpdate2Flags, enum NMSettingsUpdate2Flags
-
NMTernary, enum NMTernary +
NMState, enum NMState
-
NMVpnConnectionState, enum NMVpnConnectionState +
NMTernary, enum NMTernary
-
NMVpnConnectionStateReason, enum NMVpnConnectionStateReason +
NMVpnConnectionState, enum NMVpnConnectionState
-
NMVpnPluginFailure, enum NMVpnPluginFailure +
NMVpnConnectionStateReason, enum NMVpnConnectionStateReason
-
NMVpnServiceState, enum NMVpnServiceState +
NMVpnPluginFailure, enum NMVpnPluginFailure
-
NMWimaxNspNetworkType, enum NMWimaxNspNetworkType +
NMVpnServiceState, enum NMVpnServiceState
-
no-vj-comp, ppp +
NMWimaxNspNetworkType, enum NMWimaxNspNetworkType
-
noauth, ppp +
no-vj-comp, ppp
-
nobsdcomp, ppp +
noauth, ppp
-
nodeflate, ppp +
nobsdcomp, ppp
-
notify-peers-count, team +
nodeflate, ppp
-
notify-peers-interval, team +
notify-peers-count, team
-
number, cdma, gsm +
notify-peers-interval, team +
+
number, cdma, gsm

O

-
options, bond +
options, bond
-
output-key, ip-tunnel +
output-key, ip-tunnel
-
owner, tun +
owner, tun

P

-
p-key, infiniband +
p-key, infiniband
-
pac-file, 802-1x +
pac-file, 802-1x
-
pac-script, proxy +
pac-script, proxy
-
pac-url, proxy +
pac-url, proxy
-
page, wpan +
page, wpan
-
pairwise, 802-11-wireless-security +
pairwise, 802-11-wireless-security
-
pan-id, wpan +
pan-id, wpan
-
parent, 6lowpan, infiniband, ip-tunnel, macsec, macvlan, pppoe, vlan, vxlan +
parent, 6lowpan, infiniband, ip-tunnel, macsec, macvlan, pppoe, vlan, vxlan
-
parity, serial +
parity, serial
-
password, 802-1x, adsl, cdma, gsm, pppoe +
password, 802-1x, adsl, cdma, gsm, pppoe
-
password-flags, 802-1x, adsl, cdma, gsm, pppoe +
password-flags, 802-1x, adsl, cdma, gsm, pppoe
-
password-raw, 802-1x +
password-raw, 802-1x
-
password-raw-flags, 802-1x +
password-raw-flags, 802-1x
-
path-cost, bridge-port +
path-cost, bridge-port
-
path-mtu-discovery, ip-tunnel +
path-mtu-discovery, ip-tunnel
-
peer, ovs-patch, wifi-p2p +
peer, ovs-patch, wifi-p2p
-
peer-routes, wireguard +
peer-routes, wireguard
-
peers, wireguard +
peers, wireguard
-
permissions, connection +
permissions, connection
-
persistent, vpn +
persistent, vpn
-
phase1-auth-flags, 802-1x +
phase1-auth-flags, 802-1x
-
phase1-fast-provisioning, 802-1x +
phase1-fast-provisioning, 802-1x
-
phase1-peaplabel, 802-1x +
phase1-peaplabel, 802-1x
-
phase1-peapver, 802-1x +
phase1-peapver, 802-1x
-
phase2-altsubject-matches, 802-1x +
phase2-altsubject-matches, 802-1x
-
phase2-auth, 802-1x +
phase2-auth, 802-1x
-
phase2-autheap, 802-1x +
phase2-autheap, 802-1x
-
phase2-ca-cert, 802-1x +
phase2-ca-cert, 802-1x
-
phase2-ca-cert-password, 802-1x +
phase2-ca-cert-password, 802-1x
-
phase2-ca-cert-password-flags, 802-1x +
phase2-ca-cert-password-flags, 802-1x
-
phase2-ca-path, 802-1x +
phase2-ca-path, 802-1x
-
phase2-client-cert, 802-1x +
phase2-client-cert, 802-1x
-
phase2-client-cert-password, 802-1x +
phase2-client-cert-password, 802-1x
-
phase2-client-cert-password-flags, 802-1x +
phase2-client-cert-password-flags, 802-1x
-
phase2-domain-suffix-match, 802-1x +
phase2-domain-suffix-match, 802-1x
-
phase2-private-key, 802-1x +
phase2-private-key, 802-1x
-
phase2-private-key-password, 802-1x +
phase2-private-key-password, 802-1x
-
phase2-private-key-password-flags, 802-1x +
phase2-private-key-password-flags, 802-1x
-
phase2-subject-match, 802-1x +
phase2-subject-match, 802-1x
-
pi, tun +
pi, tun
-
pin, 802-1x, gsm +
pin, 802-1x, gsm
-
pin-flags, 802-1x, gsm +
pin-flags, 802-1x, gsm
-
pmf, 802-11-wireless-security +
pmf, 802-11-wireless-security
-
port, macsec, 802-3-ethernet +
port, macsec, 802-3-ethernet
-
powersave, 802-11-wireless +
powersave, 802-11-wireless
-
org.freedesktop.NetworkManager.PPP, org.freedesktop.NetworkManager.PPP +
org.freedesktop.NetworkManager.PPP, org.freedesktop.NetworkManager.PPP
-
org.freedesktop.NetworkManager.PPP.NeedSecrets(), The NeedSecrets() method +
org.freedesktop.NetworkManager.PPP.NeedSecrets(), The NeedSecrets() method
-
org.freedesktop.NetworkManager.PPP.SetIfindex(), The SetIfindex() method +
org.freedesktop.NetworkManager.PPP.SetIfindex(), The SetIfindex() method
-
org.freedesktop.NetworkManager.PPP.SetIp4Config(), The SetIp4Config() method +
org.freedesktop.NetworkManager.PPP.SetIp4Config(), The SetIp4Config() method
-
org.freedesktop.NetworkManager.PPP.SetIp6Config(), The SetIp6Config() method +
org.freedesktop.NetworkManager.PPP.SetIp6Config(), The SetIp6Config() method
-
org.freedesktop.NetworkManager.PPP.SetState(), The SetState() method +
org.freedesktop.NetworkManager.PPP.SetState(), The SetState() method
-
prio, team-port +
prio, team-port
-
priority, bridge, bridge-port +
priority, bridge, bridge-port
-
priority-bandwidth, dcb +
priority-bandwidth, dcb
-
priority-flow-control, dcb +
priority-flow-control, dcb
-
priority-flow-control-flags, dcb +
priority-flow-control-flags, dcb
-
priority-group-bandwidth, dcb +
priority-group-bandwidth, dcb
-
priority-group-flags, dcb +
priority-group-flags, dcb
-
priority-group-id, dcb +
priority-group-id, dcb
-
priority-strict-bandwidth, dcb +
priority-strict-bandwidth, dcb
-
priority-traffic-class, dcb +
priority-traffic-class, dcb
-
private-key, 802-1x, wireguard +
private-key, 802-1x, wireguard
-
private-key-flags, wireguard +
private-key-flags, wireguard
-
private-key-password, 802-1x +
private-key-password, 802-1x
-
private-key-password-flags, 802-1x +
private-key-password-flags, 802-1x
-
promiscuous, macvlan +
promiscuous, macvlan
-
proto, 802-11-wireless-security +
proto, 802-11-wireless-security
-
protocol, adsl +
protocol, adsl
-
proxy, vxlan +
proxy, vxlan
-
psk, 802-11-wireless-security +
psk, 802-11-wireless-security
-
psk-flags, 802-11-wireless-security +
psk-flags, 802-11-wireless-security

Q

-
qdiscs, tc +
qdiscs, tc
-
queue-id, team-port +
queue-id, team-port

R

-
rate, 802-11-wireless +
rate, 802-11-wireless
-
read-only, connection +
read-only, connection
-
refuse-chap, ppp +
refuse-chap, ppp
-
refuse-eap, ppp +
refuse-eap, ppp
-
refuse-mschap, ppp +
refuse-mschap, ppp
-
refuse-mschapv2, ppp +
refuse-mschapv2, ppp
-
refuse-pap, ppp +
refuse-pap, ppp
-
remote, ip-tunnel, vxlan +
remote, ip-tunnel, vxlan
-
require-mppe, ppp +
require-mppe, ppp
-
require-mppe-128, ppp +
require-mppe-128, ppp
-
route-data, ipv4, ipv6 +
route-data, ipv4, ipv6
-
route-metric, ipv4, ipv6 +
route-metric, ipv4, ipv6
-
route-table, ipv4, ipv6 +
route-table, ipv4, ipv6
-
routes, ipv4, ipv6 +
routes, ipv4, ipv6
-
rsc, vxlan +
rsc, vxlan
-
rstp-enable, ovs-bridge +
rstp-enable, ovs-bridge
-
runner, team +
runner, team
-
runner-active, team +
runner-active, team
-
runner-agg-select-policy, team +
runner-agg-select-policy, team
-
runner-fast-rate, team +
runner-fast-rate, team
-
runner-hwaddr-policy, team +
runner-hwaddr-policy, team
-
runner-min-ports, team +
runner-min-ports, team
-
runner-sys-prio, team +
runner-sys-prio, team
-
runner-tx-balancer, team +
runner-tx-balancer, team
-
runner-tx-balancer-interval, team +
runner-tx-balancer-interval, team
-
runner-tx-hash, team +
runner-tx-hash, team

S

-
s390-nettype, 802-3-ethernet +
s390-nettype, 802-3-ethernet
-
s390-options, 802-3-ethernet +
s390-options, 802-3-ethernet
-
s390-subchannels, 802-3-ethernet +
s390-subchannels, 802-3-ethernet
-
secondaries, connection +
secondaries, connection
-
secrets, vpn +
secrets, vpn
-
security, 802-11-wireless +
security, 802-11-wireless
-
seen-bssids, 802-11-wireless +
seen-bssids, 802-11-wireless
-
send-delay, serial +
send-delay, serial
-
send-sci, macsec +
send-sci, macsec
-
service, pppoe +
service, pppoe
-
service-type, vpn +
service-type, vpn
-
short-address, wpan +
short-address, wpan
-
sim-id, gsm +
sim-id, gsm
-
sim-operator-id, gsm +
sim-operator-id, gsm
-
slave-type, connection +
slave-type, connection
-
source-port-max, vxlan +
source-port-max, vxlan
-
source-port-min, vxlan +
source-port-min, vxlan
-
speed, 802-3-ethernet +
speed, 802-3-ethernet
-
ssid, 802-11-olpc-mesh, 802-11-wireless +
ssid, 802-11-olpc-mesh, 802-11-wireless
-
stable-id, connection +
stable-id, connection
-
sticky, team-port +
sticky, team-port
-
stopbits, serial +
stopbits, serial
-
stp, bridge +
stp, bridge
-
stp-enable, ovs-bridge +
stp-enable, ovs-bridge
-
subject-match, 802-1x +
subject-match, 802-1x
-
system-ca-certs, 802-1x +
system-ca-certs, 802-1x

T

-
tag, ovs-port +
tag, ovs-port
-
tap, macvlan +
tap, macvlan
-
tfilters, tc +
tfilters, tc
-
timeout, vpn +
timeout, vpn
-
timestamp, connection +
timestamp, connection
-
token, ipv6 +
token, ipv6
-
tos, ip-tunnel, vxlan +
tos, ip-tunnel, vxlan
-
total-vfs, sriov +
total-vfs, sriov
-
transport-mode, infiniband +
transport-mode, infiniband
-
ttl, ip-tunnel, vxlan +
ttl, ip-tunnel, vxlan
-
tx-power, 802-11-wireless +
tx-power, 802-11-wireless
-
type, connection, bluetooth, ovs-interface +
type, connection, bluetooth, ovs-interface

U

-
user-name, vpn +
user-name, vpn
-
username, adsl, cdma, gsm, pppoe +
username, adsl, cdma, gsm, pppoe
-
uuid, connection +
uuid, connection

V

-
validation, macsec +
validation, macsec
-
vci, adsl +
vci, adsl
-
vfs, sriov +
vfs, sriov
-
vlan-default-pvid, bridge +
vlan-default-pvid, bridge
-
vlan-filtering, bridge +
vlan-filtering, bridge
-
vlan-mode, ovs-port +
vlan-mode, ovs-port
-
vlans, bridge, bridge-port +
vlans, bridge, bridge-port
-
vnet-hdr, tun +
vnet-hdr, tun
-
vpi, adsl +
vpi, adsl
-
org.freedesktop.NetworkManager.VPN.Connection, org.freedesktop.NetworkManager.VPN.Connection +
org.freedesktop.NetworkManager.VPN.Connection, org.freedesktop.NetworkManager.VPN.Connection
-
org.freedesktop.NetworkManager.VPN.Connection::PropertiesChanged, The "PropertiesChanged" signal +
org.freedesktop.NetworkManager.VPN.Connection::PropertiesChanged, The "PropertiesChanged" signal
-
org.freedesktop.NetworkManager.VPN.Connection::VpnStateChanged, The "VpnStateChanged" signal +
org.freedesktop.NetworkManager.VPN.Connection::VpnStateChanged, The "VpnStateChanged" signal
-
org.freedesktop.NetworkManager.VPN.Connection:Banner, The "Banner" property +
org.freedesktop.NetworkManager.VPN.Connection:Banner, The "Banner" property
-
org.freedesktop.NetworkManager.VPN.Connection:VpnState, The "VpnState" property +
org.freedesktop.NetworkManager.VPN.Connection:VpnState, The "VpnState" property
-
org.freedesktop.NetworkManager.VPN.Plugin, org.freedesktop.NetworkManager.VPN.Plugin +
org.freedesktop.NetworkManager.VPN.Plugin, org.freedesktop.NetworkManager.VPN.Plugin
-
org.freedesktop.NetworkManager.VPN.Plugin.Connect(), The Connect() method +
org.freedesktop.NetworkManager.VPN.Plugin.Connect(), The Connect() method
-
org.freedesktop.NetworkManager.VPN.Plugin.ConnectInteractive(), The ConnectInteractive() method +
org.freedesktop.NetworkManager.VPN.Plugin.ConnectInteractive(), The ConnectInteractive() method
-
org.freedesktop.NetworkManager.VPN.Plugin.Disconnect(), The Disconnect() method +
org.freedesktop.NetworkManager.VPN.Plugin.Disconnect(), The Disconnect() method
-
org.freedesktop.NetworkManager.VPN.Plugin.NeedSecrets(), The NeedSecrets() method +
org.freedesktop.NetworkManager.VPN.Plugin.NeedSecrets(), The NeedSecrets() method
-
org.freedesktop.NetworkManager.VPN.Plugin.NewSecrets(), The NewSecrets() method +
org.freedesktop.NetworkManager.VPN.Plugin.NewSecrets(), The NewSecrets() method
-
org.freedesktop.NetworkManager.VPN.Plugin.SetConfig(), The SetConfig() method +
org.freedesktop.NetworkManager.VPN.Plugin.SetConfig(), The SetConfig() method
-
org.freedesktop.NetworkManager.VPN.Plugin.SetFailure(), The SetFailure() method +
org.freedesktop.NetworkManager.VPN.Plugin.SetFailure(), The SetFailure() method
-
org.freedesktop.NetworkManager.VPN.Plugin.SetIp4Config(), The SetIp4Config() method +
org.freedesktop.NetworkManager.VPN.Plugin.SetIp4Config(), The SetIp4Config() method
-
org.freedesktop.NetworkManager.VPN.Plugin.SetIp6Config(), The SetIp6Config() method +
org.freedesktop.NetworkManager.VPN.Plugin.SetIp6Config(), The SetIp6Config() method
-
org.freedesktop.NetworkManager.VPN.Plugin::Config, The "Config" signal +
org.freedesktop.NetworkManager.VPN.Plugin::Config, The "Config" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::Failure, The "Failure" signal +
org.freedesktop.NetworkManager.VPN.Plugin::Failure, The "Failure" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::Ip4Config, The "Ip4Config" signal +
org.freedesktop.NetworkManager.VPN.Plugin::Ip4Config, The "Ip4Config" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::Ip6Config, The "Ip6Config" signal +
org.freedesktop.NetworkManager.VPN.Plugin::Ip6Config, The "Ip6Config" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::LoginBanner, The "LoginBanner" signal +
org.freedesktop.NetworkManager.VPN.Plugin::LoginBanner, The "LoginBanner" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::SecretsRequired, The "SecretsRequired" signal +
org.freedesktop.NetworkManager.VPN.Plugin::SecretsRequired, The "SecretsRequired" signal
-
org.freedesktop.NetworkManager.VPN.Plugin::StateChanged, The "StateChanged" signal +
org.freedesktop.NetworkManager.VPN.Plugin::StateChanged, The "StateChanged" signal
-
org.freedesktop.NetworkManager.VPN.Plugin:State, The "State" property +
org.freedesktop.NetworkManager.VPN.Plugin:State, The "State" property

W

-
wake-on-lan, 802-3-ethernet +
wait-device-timeout, connection +
+
wake-on-lan, 802-3-ethernet
-
wake-on-lan-password, 802-3-ethernet +
wake-on-lan-password, 802-3-ethernet
-
wake-on-wlan, 802-11-wireless +
wake-on-wlan, 802-11-wireless
-
wep-key-flags, 802-11-wireless-security +
wep-key-flags, 802-11-wireless-security
-
wep-key-type, 802-11-wireless-security +
wep-key-type, 802-11-wireless-security
-
wep-key0, 802-11-wireless-security +
wep-key0, 802-11-wireless-security
-
wep-key1, 802-11-wireless-security +
wep-key1, 802-11-wireless-security
-
wep-key2, 802-11-wireless-security +
wep-key2, 802-11-wireless-security
-
wep-key3, 802-11-wireless-security +
wep-key3, 802-11-wireless-security
-
wep-tx-keyidx, 802-11-wireless-security +
wep-tx-keyidx, 802-11-wireless-security
-
wfd-ies, wifi-p2p +
wfd-ies, wifi-p2p
-
org.freedesktop.NetworkManager.WifiP2PPeer, org.freedesktop.NetworkManager.WifiP2PPeer +
org.freedesktop.NetworkManager.WifiP2PPeer, org.freedesktop.NetworkManager.WifiP2PPeer
-
org.freedesktop.NetworkManager.WifiP2PPeer:Flags, The "Flags" property +
org.freedesktop.NetworkManager.WifiP2PPeer:Flags, The "Flags" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:HwAddress, The "HwAddress" property +
org.freedesktop.NetworkManager.WifiP2PPeer:HwAddress, The "HwAddress" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:LastSeen, The "LastSeen" property +
org.freedesktop.NetworkManager.WifiP2PPeer:LastSeen, The "LastSeen" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:Manufacturer, The "Manufacturer" property +
org.freedesktop.NetworkManager.WifiP2PPeer:Manufacturer, The "Manufacturer" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:Model, The "Model" property +
org.freedesktop.NetworkManager.WifiP2PPeer:Model, The "Model" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:ModelNumber, The "ModelNumber" property +
org.freedesktop.NetworkManager.WifiP2PPeer:ModelNumber, The "ModelNumber" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:Serial, The "Serial" property +
org.freedesktop.NetworkManager.WifiP2PPeer:Serial, The "Serial" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:Strength, The "Strength" property +
org.freedesktop.NetworkManager.WifiP2PPeer:Strength, The "Strength" property
-
org.freedesktop.NetworkManager.WifiP2PPeer:WfdIEs, The "WfdIEs" property +
org.freedesktop.NetworkManager.WifiP2PPeer:WfdIEs, The "WfdIEs" property
-
wps-method, wifi-p2p, 802-11-wireless-security +
wps-method, wifi-p2p, 802-11-wireless-security

Z

-
zone, connection +
zone, connection
diff --git a/docs/api/html/nm-dbus-types.html b/docs/api/html/nm-dbus-types.html index 56e69b2c..5c054bfb 100644 --- a/docs/api/html/nm-dbus-types.html +++ b/docs/api/html/nm-dbus-types.html @@ -1065,6 +1065,21 @@   + + +

NM_WIFI_DEVICE_CAP_MESH

+

+ + +

= 0x00001000

+

+ + +

device supports acting as a mesh point

+

+ +  + @@ -1437,6 +1452,21 @@   + + +

NM_802_11_MODE_MESH

+

+ + +

= 4

+

+ + +

the device is a 802.11s mesh point.

+

+ +  + @@ -4212,11 +4242,91 @@
+

enum NMSettingsAddConnection2Flags

+

Numeric flags for the "flags" argument of AddConnection2() D-Bus API.

+

Since: 1.20

+

+
+

Values

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + +
+

NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE

+

+		 +

= 0

+

+		 +

an alias for numeric zero, no flags set.

+

+		 
+

NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK

+

+		 +

= 0x1

+

+		 +

to persist the connection to disk.

+

+		 
+

NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY

+

+		 +

= 0x2

+

+		 +

to make the connection in-memory only.

+

+		 
+

NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT

+

+		 +

= 0x20

+

+		 +

usually, when the connection has autoconnect enabled and gets added, it becomes eligible to autoconnect right away. Setting this flag, disables autoconnect until the connection is manually activated.

+

+		 
+
+
+
+

enum NMSettingsUpdate2Flags

Since: 1.12

-

Values

+

Values

@@ -4265,7 +4375,7 @@

@@ -4280,7 +4390,7 @@

@@ -4295,7 +4405,7 @@

@@ -4310,7 +4420,7 @@

@@ -4330,6 +4440,21 @@ + + + + + +
-

to make the connection in-memory only. If the connection was previously persistent, the corresponding file on disk is not deleted but merely the connection is decoupled from the file on disk. If you later delete an in-memory connection, the connection on disk will be deleted as well.

+

makes the profile in-memory. Note that such profiles are stored in keyfile format under /run. If the file is already in-memory, the file in /run is updated in-place. Otherwise, the previous storage for the profile is left unchanged on disk, and the in-memory copy shadows it. Note that the original filename of the previous persistent storage (if any) is remembered. That means, when later persisting the profile again to disk, the file on disk will be overwritten again. Likewise, when finally deleting the profile, both the storage from /run and persistent storage are deleted (or if the persistent storage does not allow deletion, and nmmeta file is written to mark the UUID as deleted).

   -

this is like @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, but if the connection has a corresponding file on disk, the association between the connection and the file is forgotten but the file is not modified. The difference to %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY is if you later save the connection again to disk, a new file name will be chosen without overwriting the remaining file on disk. Also, if you delete the connection later, the file on disk will not be deleted.

+

this is almost the same as @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, with one difference: when later deleting the profile, the original profile will not be deleted. Instead a nmmeta file is written to /run to indicate that the profile is gone. Note that if such a nmmeta tombstone file exists and hides a file in persistant storage, then when re-adding the profile with the same UUID, then the original storage is taken over again.

   -

this is like @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, but if the connection has a corresponding file on disk, the file on disk will be deleted.

+

this is like @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, but if the connection has a corresponding file on persistent storage, the file will be deleted right away. If the profile is later again persisted to disk, a new, unused filename will be chosen.

   -

This can be specified with either %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED or %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY. After making the connection in-memory only, the connection is marked as volatile. That means, if the connection is currently not active it will be deleted right away. Otherwise, it is marked to for deletion once the connection deactivates. A volatile connection cannot autoactivate again (because it's about to be deleted), but a manual activation will clear the volatile flag.

+

This can be specified with either %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED or %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY. After making the connection in-memory only, the connection is marked as volatile. That means, if the connection is currently not active it will be deleted right away. Otherwise, it is marked to for deletion once the connection deactivates. A volatile connection cannot autoactivate again (because it's about to be deleted), but a manual activation will clear the volatile flag.

    
+

NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY

+

+		 +

= 0x40

+

+		 +

when a profile gets modified that is currently active, then these changes don't take effect for the active device unless the profile gets reactivated or the configuration reapplied. There are two exceptions: by default "connection.zone" and "connection.metered" properties take effect immediately. Specify this flag to prevent these properties to take effect, so that the change is restricted to modify the profile. Since: 1.20.

+

+		 
@@ -4341,7 +4466,7 @@

Since: 1.14

-

Values

+

Values

diff --git a/docs/api/html/nm-openvswitch.html b/docs/api/html/nm-openvswitch.html index abd868ad..c334e8e0 100644 --- a/docs/api/html/nm-openvswitch.html +++ b/docs/api/html/nm-openvswitch.html @@ -102,8 +102,8 @@ Connection 'ovs-bridge-bridge0' (d10fc64d-1d48-4394-a1b8-e1aea72f27d5) successfully added. $ nmcli conn add type ovs-port conn.interface port0 master bridge0 Connection 'ovs-port-port0' (5ae22bae-bba4-4815-9ade-7e635633e1f0) successfully added. -$ nmcli conn add type ovs-interface conn.interface iface0 master port0 \ - ipv4.method manual ipv4.address 192.0.2.1/24 +$ nmcli conn add type ovs-interface slave-type ovs-port conn.interface iface0 \ + master port0 ipv4.method manual ipv4.address 192.0.2.1/24 Connection 'ovs-interface-iface0' (3640d2a1-a2fd-4718-92f1-cffadb5b6cdc) successfully added.

As said above, you need to create a Port even for a single interface. diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 5452c021..8646aa22 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -937,6 +937,17 @@ Example: LLMNR=yes Allowed values: yes,no,resolve +

+ + + + +
wait-device-timeoutDEVTIMEOUT(+) + for initscripts compatibility, this variable must be a whole integer. If necessary, NetworkManager stores also a fractional component for the milliseconds. + +Example: DEVTIMEOUT=5 + +Allowed values: timeout in seconds.
@@ -1334,9 +1345,9 @@ Example: DHCP_FQDN=foo.bar.com method -IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C +IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C, IPV6_DISABLED IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no -Method used for IPv6 protocol configuration. ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes +Method used for IPv6 protocol configuration. ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes; disabled ~ IPV6_DISABLED=yes dns @@ -1516,7 +1527,25 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 51. ovs-interface setting

+

Table 51. ovs-dpdk setting

+
++++++ + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
+
+
+

Table 52. ovs-interface setting

@@ -1534,7 +1563,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 52. ovs-patch setting

+

Table 53. ovs-patch setting

@@ -1552,7 +1581,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 53. ovs-port setting

+

Table 54. ovs-port setting

@@ -1570,7 +1599,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 54. proxy setting

+

Table 55. proxy setting

@@ -1623,7 +1652,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac

-

Table 55. sriov setting

+

Table 56. sriov setting

@@ -1668,7 +1697,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1

-

Table 56. tc setting

+

Table 57. tc setting

@@ -1703,7 +1732,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 57. team-port setting

+

Table 58. team-port setting

@@ -1726,7 +1755,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 58. team setting

+

Table 59. team setting

@@ -1749,7 +1778,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 59. user setting

+

Table 60. user setting

@@ -1774,7 +1803,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 60. vlan setting

+

Table 61. vlan setting

@@ -1837,7 +1866,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 61. wifi-p2p setting

+

Table 62. wifi-p2p setting

@@ -1855,7 +1884,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 62. 802-3-ethernet setting

+

Table 63. 802-3-ethernet setting

@@ -1956,7 +1985,7 @@ Allowed values: "qeth", "lcs" or "ctc"

-

Table 63. wireguard setting

+

Table 64. wireguard setting

@@ -1974,7 +2003,7 @@ Allowed values: "qeth", "lcs" or "ctc"

-

Table 64. 802-11-wireless-security setting

+

Table 65. 802-11-wireless-security setting

@@ -2156,7 +2185,7 @@ Allowed values: default, disable, optional, required

-

Table 65. 802-11-wireless setting

+

Table 66. 802-11-wireless setting

@@ -2304,7 +2333,7 @@ Allowed values: default, never, always

-

Table 66. wpan setting

+

Table 67. wpan setting

diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html index 6ee39655..09d0c176 100644 --- a/docs/api/html/nm-settings.html +++ b/docs/api/html/nm-settings.html @@ -212,7 +212,7 @@ - + @@ -226,7 +226,7 @@ - + @@ -266,6 +266,13 @@ + + + + + + @@ -322,7 +329,7 @@ - + @@ -399,7 +406,7 @@ - + @@ -476,7 +483,7 @@ - + @@ -875,7 +882,7 @@ - + @@ -924,7 +931,7 @@ - + @@ -1057,14 +1064,14 @@ - + - + @@ -1078,7 +1085,7 @@ - + @@ -1092,21 +1099,21 @@ - + - + - + @@ -1369,7 +1376,7 @@ - + @@ -1418,14 +1425,14 @@ - + - + @@ -1433,13 +1440,13 @@ dns-priority - + - + @@ -1475,7 +1482,7 @@ method - + - + @@ -1551,7 +1558,7 @@ - + @@ -1593,14 +1600,14 @@ - + - + @@ -1608,13 +1615,13 @@ dns-priority - + - + @@ -1657,7 +1664,7 @@ method - + - + @@ -1970,7 +1977,7 @@ - +
permissions array of string[]  An array of strings defining what access a given user has to this connection. If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list. When this is not empty, the connection can be active only when one of the specified users is logged into an active session. Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed. Any other values are ignored and reserved for future use. [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use. All of [type], [id], and [reserved] must be valid UTF-8.
secondaries array of string[]  List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.
+wait-device-timeoutint32-1Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.
zone string   altsubject-matches array of string[]  List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
eap array of string[]  The allowed EAP method to be used when authenticating to the network with 802.1x. Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast". Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
phase2-altsubject-matches array of string[]  List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
vlans array of vardict[]  Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
vlans array of vardict[]  Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
priority-bandwidth array of uint32[0, 0, 0, 0, 0, 0, 0, 0]  An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use. The sum of all percentages for priorities which belong to the same group must total 100 percents.
priority-flow-control array of uint32[False, False, False, False, False, False, False, False]  An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.
priority-group-bandwidth array of uint32[0, 0, 0, 0, 0, 0, 0, 0]  An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group. Allowed values are 0 - 100, and the sum of all values must total 100 percents.
priority-group-id array of uint32[0, 0, 0, 0, 0, 0, 0, 0]  An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID. Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
priority-strict-bandwidth array of uint32[False, False, False, False, False, False, False, False]  An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.
priority-traffic-class array of uint32[0, 0, 0, 0, 0, 0, 0, 0]  An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.
addresses array of array of uint32[]  Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'. Array of IPv4 address structures. Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet.
dns array of uint32[]  Array of IP addresses of DNS servers (as network-byte-order integers)
dns-options array of string[]  Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.
int32 0DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
dns-search array of string[]  Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
string  IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration. The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration. The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
@@ -1509,7 +1516,7 @@ routes array of array of uint32[]  Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'. Array of IPv4 route structures. Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)
addresses array of legacy IPv6 address struct (a(ayuay))[]  Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'. Array of IPv6 address structures. Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet.
dns array of byte array[]  Array of IP addresses of DNS servers (in network byte order)
dns-options array of string[]  Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.
int32 0DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
dns-search array of string[]  Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
string  IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration. The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration. The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
@@ -1691,7 +1698,7 @@ routes array of legacy IPv6 route struct (a(ayuayu))[]  Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'. Array of IPv6 route structures. Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device.
interface-name array of string[]  A list of interface names to match. Each element is a shell wildcard pattern. When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
@@ -2037,6 +2044,13 @@ +datapath-type +string +  +The data path type. One of "system", "netdev" or empty. + + + fail-mode string   @@ -2068,7 +2082,33 @@
-

ovs-interface setting

+

ovs-dpdk setting

+

OvsDpdk Link Settings.

+
++++++ + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+devargsstring Open vSwitch DPDK device arguments.
+
+
+
+

ovs-interface setting

Open vSwitch Interface Settings.

@@ -2088,13 +2128,13 @@ type - +
string  The interface type. Either "internal", or empty.The interface type. Either "internal", "system", "patch", "dpdk", or empty.
-

ovs-patch setting

+

ovs-patch setting

OvsPatch Link Settings.

@@ -2120,7 +2160,7 @@
-

ovs-port setting

+

ovs-port setting

OvsPort Link Settings.

@@ -2183,7 +2223,7 @@
-

ppp setting

+

ppp setting

Point-to-Point Protocol Settings.

@@ -2330,7 +2370,7 @@
-

pppoe setting

+

pppoe setting

PPP-over-Ethernet Settings.

@@ -2386,7 +2426,7 @@
-

proxy setting

+

proxy setting

WWW Proxy Settings.

@@ -2435,7 +2475,7 @@
-

serial setting

+

serial setting

Serial Link Settings.

@@ -2491,7 +2531,7 @@
-

sriov setting

+

sriov setting

SR-IOV settings..

@@ -2525,7 +2565,7 @@ - + @@ -2533,7 +2573,7 @@
-

tc setting

+

tc setting

Linux Traffic Control Settings..

vfs array of vardict[]  Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.
@@ -2553,14 +2593,14 @@ - + - + @@ -2568,7 +2608,7 @@
-

team setting

+

team setting

Teaming Settings.

qdiscs array of vardict[]  Array of TC queueing disciplines.
tfilters array of vardict[]  Array of TC traffic filters.
@@ -2602,49 +2642,49 @@ - + - + - + - + - + - - + + - + @@ -2700,7 +2740,7 @@ - + @@ -2708,7 +2748,7 @@
-

team-port setting

+

team-port setting

Team Port Settings.

link-watchers array of vardict[]  Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
mcast-rejoin-count int320-1 Corresponds to the teamd mcast_rejoin.count.
mcast-rejoin-interval int320-1 Corresponds to the teamd mcast_rejoin.interval.
notify-peers-count int320-1 Corresponds to the teamd notify_peers.count.
notify-peers-interval int320-1 Corresponds to the teamd notify_peers.interval.
runner string"roundrobin"Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random". When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value). Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random".
runner-active booleanFALSETRUE Corresponds to the teamd runner.active.
runner-tx-hash array of string[]  Corresponds to the teamd runner.tx_hash.
@@ -2735,21 +2775,21 @@ - + - + - + @@ -2778,7 +2818,7 @@
-

tun setting

+

tun setting

Tunnel Settings.

lacp-key int320-1 Corresponds to the teamd ports.PORTIFNAME.lacp_key.
lacp-prio int32255-1 Corresponds to the teamd ports.PORTIFNAME.lacp_prio.
link-watchers array of vardict[]  Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
@@ -2841,7 +2881,7 @@
-

user setting

+

user setting

General User Profile Settings.

@@ -2867,7 +2907,7 @@
-

vlan setting

+

vlan setting

VLAN Settings.

@@ -2887,7 +2927,7 @@ - + @@ -2908,7 +2948,7 @@ - + @@ -2930,7 +2970,7 @@
-

vpn setting

+

vpn setting

VPN Settings.

egress-priority-map array of string[]  For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities. The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
ingress-priority-map array of string[]  For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities. The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
@@ -2993,7 +3033,7 @@
-

vxlan setting

+

vxlan setting

VXLAN Settings.

@@ -3126,7 +3166,7 @@
-

wifi-p2p setting

+

wifi-p2p setting

Wi-Fi P2P Settings.

@@ -3168,7 +3208,7 @@
-

wimax setting

+

wimax setting

WiMax Settings.

@@ -3203,7 +3243,7 @@
-

802-3-ethernet setting

+

802-3-ethernet setting

Wired Ethernet Settings.

@@ -3265,7 +3305,7 @@ - + @@ -3300,7 +3340,7 @@ - + @@ -3329,8 +3369,8 @@
-

wireguard setting

-

WireGuard Ethernet Settings.

+

wireguard setting

+

WireGuard Settings.

mac-address-blacklist array of string[]  If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list. Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
s390-subchannels array of string[]  Identifies specific subchannels that this network device uses for communication with z/VM or s390 host. Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels. The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
@@ -3350,7 +3390,21 @@ fwmark - + + + + + + + + + + + + + - +
uint32 0The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that "ip4-auto-default-route" or "ip6-auto-default-route" enabled, implies to automatically choose a fwmark.
+ip4-auto-default-routeNMTernary (int32) Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, a unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips.
+ip6-auto-default-routeNMTernary (int32) Like ip4-auto-default-route, but for the IPv6 default route.
@@ -3399,7 +3453,7 @@
-

802-11-wireless setting

+

802-11-wireless setting

Wi-Fi Settings.

@@ -3475,7 +3529,7 @@ - + @@ -3490,7 +3544,7 @@ mode - + - + @@ -3553,7 +3607,7 @@
-

802-11-wireless-security setting

+

802-11-wireless-security setting

Wi-Fi Security Settings.

mac-address-blacklist array of string[]  A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply. Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55").
string  Wi-Fi network mode; one of "infrastructure", "adhoc" or "ap". If blank, infrastructure is assumed.Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap". If blank, infrastructure is assumed.
@@ -3524,7 +3578,7 @@ seen-bssids array of string[]  A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network. NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.
@@ -3587,7 +3641,7 @@ - + @@ -3622,7 +3676,7 @@ - + @@ -3636,7 +3690,7 @@ - + @@ -3714,7 +3768,7 @@
-

wpan setting

+

wpan setting

IEEE 802.15.4 (WPAN) MAC Settings.

group array of string[]  A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
pairwise array of string[]  A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp".
proto array of string[]  List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed.
diff --git a/docs/api/html/nmcli.html b/docs/api/html/nmcli.html index bcef8464..10d6f435 100644 --- a/docs/api/html/nmcli.html +++ b/docs/api/html/nmcli.html @@ -2531,8 +2531,8 @@ It's equivalent to the +bond.options 'option=value'

Bugs

-

There are probably some bugs. If you find a bug, please report it to - https://bugzilla.gnome.org/ — product NetworkManager.

+

There are probably some bugs. If you find a bug, please report it to your distribution + or upstream at https://gitlab.freedesktop.org/NetworkManager/NetworkManager.

See Also

diff --git a/docs/api/html/ref-settings.html b/docs/api/html/ref-settings.html index 022eeb31..53c502c7 100644 --- a/docs/api/html/ref-settings.html +++ b/docs/api/html/ref-settings.html @@ -97,6 +97,9 @@ ovs-bridge — OvsBridge Link Settings
+ovs-dpdk — OvsDpdk Link Settings +
+
ovs-interface — Open vSwitch Interface Settings
@@ -154,7 +157,7 @@ 802-3-ethernet — Wired Ethernet Settings
-wireguard — WireGuard Ethernet Settings +wireguard — WireGuard Settings
802-11-wireless — Wi-Fi Settings diff --git a/docs/api/html/settings-6lowpan.html b/docs/api/html/settings-6lowpan.html index 6b94ca8e..26605469 100644 --- a/docs/api/html/settings-6lowpan.html +++ b/docs/api/html/settings-6lowpan.html @@ -38,7 +38,7 @@ Properties
-

Table 68. 

+

Table 69. 

diff --git a/docs/api/html/settings-802-11-olpc-mesh.html b/docs/api/html/settings-802-11-olpc-mesh.html index 012bee43..3195165b 100644 --- a/docs/api/html/settings-802-11-olpc-mesh.html +++ b/docs/api/html/settings-802-11-olpc-mesh.html @@ -38,7 +38,7 @@ Properties
-

Table 88. 

+

Table 89. 

diff --git a/docs/api/html/settings-802-11-wireless-security.html b/docs/api/html/settings-802-11-wireless-security.html index aed0210e..bdbd4109 100644 --- a/docs/api/html/settings-802-11-wireless-security.html +++ b/docs/api/html/settings-802-11-wireless-security.html @@ -34,11 +34,11 @@
-

+

Properties

-

Table 111. 

+

Table 113. 

@@ -68,7 +68,7 @@ - + @@ -98,7 +98,7 @@ - + @@ -110,7 +110,7 @@ - + diff --git a/docs/api/html/settings-802-11-wireless.html b/docs/api/html/settings-802-11-wireless.html index 80e7e340..0b6f092d 100644 --- a/docs/api/html/settings-802-11-wireless.html +++ b/docs/api/html/settings-802-11-wireless.html @@ -34,11 +34,11 @@ 
group
 
array of string
[]

 A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one of "wep40", "wep104", "tkip", or "ccmp".
 

 

 
pairwise

 
array of string
[]

 A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of "tkip" or "ccmp".
 

 

 
proto

 
array of string
[]

 List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN).  If not specified, both WPA and RSN connections are allowed.
 

 

 

 

-

+

             Properties
         

 

-
Table 110. 

+
Table 112. 

 
@@ -104,7 +104,7 @@
 
-
+
@@ -117,7 +117,7 @@
 
-
+
@@ -146,7 +146,7 @@
 
-
+
diff --git a/docs/api/html/settings-802-1x.html b/docs/api/html/settings-802-1x.html
index 63b845ec..5c65daf2 100644
--- a/docs/api/html/settings-802-1x.html
+++ b/docs/api/html/settings-802-1x.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 69. 

+
Table 70. 

 

 
 


 
mac-address-blacklist

 
array of string
[]

 A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55").
 

 
mode

 
string

 
Wi-Fi network mode; one of "infrastructure", "adhoc" or "ap".  If blank, infrastructure is assumed.Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap".  If blank, infrastructure is assumed.
 

 

 
mtu

 
seen-bssids

 
array of string
[]

 A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network.  NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved.
 

 

 
@@ -56,7 +56,7 @@
 
-
+
@@ -122,7 +122,7 @@
 
-
+
@@ -188,7 +188,7 @@
 
-
+
diff --git a/docs/api/html/settings-802-3-ethernet.html b/docs/api/html/settings-802-3-ethernet.html
index 425bd124..85a53fea 100644
--- a/docs/api/html/settings-802-3-ethernet.html
+++ b/docs/api/html/settings-802-3-ethernet.html
@@ -34,11 +34,11 @@
 

 
 


 
altsubject-matches

 
array of string
[]

 List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed.
 

 

 
eap

 
array of string
[]

 The allowed EAP method to be used when authenticating to the network with 802.1x.  Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast".  Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations.
 

 

 
phase2-altsubject-matches

 
array of string
[]

 List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed.
 

 

 

 

-

+

             Properties
         

 

-
Table 108. 

+
Table 110. 

 
@@ -92,7 +92,7 @@
 
-
+
@@ -122,7 +122,7 @@
 
-
+
diff --git a/docs/api/html/settings-adsl.html b/docs/api/html/settings-adsl.html
index e019f1fc..86812bd4 100644
--- a/docs/api/html/settings-adsl.html
+++ b/docs/api/html/settings-adsl.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 70. 

+
Table 71. 

 

 
 


 
mac-address-blacklist

 
array of string
[]

 If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).
 

 

 
s390-subchannels

 
array of string
[]

 Identifies specific subchannels that this network device uses for communication with z/VM or s390 host.  Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels.  The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character.
 

 

 
diff --git a/docs/api/html/settings-bluetooth.html b/docs/api/html/settings-bluetooth.html
index a7bfd081..bb9c2026 100644
--- a/docs/api/html/settings-bluetooth.html
+++ b/docs/api/html/settings-bluetooth.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 71. 

+
Table 72. 

 

 
 

 
diff --git a/docs/api/html/settings-bond.html b/docs/api/html/settings-bond.html
index 5695ed42..d4363200 100644
--- a/docs/api/html/settings-bond.html
+++ b/docs/api/html/settings-bond.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 72. 

+
Table 73. 

 

 
 

 
diff --git a/docs/api/html/settings-bridge-port.html b/docs/api/html/settings-bridge-port.html
index 4f4eaa45..5c4c3da1 100644
--- a/docs/api/html/settings-bridge-port.html
+++ b/docs/api/html/settings-bridge-port.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 74. 

+
Table 75. 

 

 
 

 
@@ -74,7 +74,7 @@
 
-
+
diff --git a/docs/api/html/settings-bridge.html b/docs/api/html/settings-bridge.html
index f137d4e9..555125a4 100644
--- a/docs/api/html/settings-bridge.html
+++ b/docs/api/html/settings-bridge.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 73. 

+
Table 74. 

 

 
 


 
vlans

 
array of vardict
[]

 Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
 

 
 
@@ -128,7 +128,7 @@
 
-
+
diff --git a/docs/api/html/settings-cdma.html b/docs/api/html/settings-cdma.html
index a9dffd77..4f85e32c 100644
--- a/docs/api/html/settings-cdma.html
+++ b/docs/api/html/settings-cdma.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 75. 

+
Table 76. 

 

 
 


 
vlans

 
array of vardict
[]

 Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured  by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
 

 
 
diff --git a/docs/api/html/settings-connection.html b/docs/api/html/settings-connection.html
index fb44cf7e..2963eeac 100644
--- a/docs/api/html/settings-connection.html
+++ b/docs/api/html/settings-connection.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 67. 

+
Table 68. 

 

 
 

 
@@ -140,7 +140,7 @@
 
-
+
@@ -152,7 +152,7 @@
 
-
+
@@ -186,6 +186,12 @@
 
+
+
+
+
+
+
diff --git a/docs/api/html/settings-dcb.html b/docs/api/html/settings-dcb.html
index 0f102334..f47bca79 100644
--- a/docs/api/html/settings-dcb.html
+++ b/docs/api/html/settings-dcb.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 76. 

+
Table 77. 

 

 
 


 
permissions

 
array of string
[]

 An array of strings defining what access a given user has to this connection.  If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list.  When this is not empty, the connection can be active only when one of the specified users is logged into an active session.  Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed.  Any other values are ignored and reserved for future use.  [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use.  All of [type], [id], and [reserved] must be valid UTF-8.
 

 

 
secondaries

 
array of string
[]

 List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported.
 

 
A universally unique identifier for the connection, for example generated with libuuid.  It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network.  For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-").
 

 
wait-device-timeout
int32
-1
Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. Note that this property only works together with NMSettingConnection:interface-name to identify the device that will be waited for. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.

 
zone

 
string

 

 
@@ -98,13 +98,13 @@
 
-
+
-
+
@@ -116,7 +116,7 @@
 
-
+
@@ -128,19 +128,19 @@
 
-
+
-
+
-
+
diff --git a/docs/api/html/settings-dummy.html b/docs/api/html/settings-dummy.html
index 7db75778..fe5f60ca 100644
--- a/docs/api/html/settings-dummy.html
+++ b/docs/api/html/settings-dummy.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 77. 

+
Table 78. 

 

 
 


 
priority-bandwidth

 
array of uint32
[0, 0, 0, 0, 0, 0, 0, 0]

 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use.  The sum of all percentages for priorities which belong to the same group must total 100 percents.
 

 

 
priority-flow-control

 
array of uint32
[False, False, False, False, False, False, False, False]

 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause.
 

 

 
priority-group-bandwidth

 
array of uint32
[0, 0, 0, 0, 0, 0, 0, 0]

 An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group.  Allowed values are 0 - 100, and the sum of all values must total 100 percents.
 

 

 
priority-group-id

 
array of uint32
[0, 0, 0, 0, 0, 0, 0, 0]

 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID.  Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group.
 

 

 
priority-strict-bandwidth

 
array of uint32
[False, False, False, False, False, False, False, False]

 An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group.
 

 

 
priority-traffic-class

 
array of uint32
[0, 0, 0, 0, 0, 0, 0, 0]

 An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped.
 

 
 
diff --git a/docs/api/html/settings-ethtool.html b/docs/api/html/settings-ethtool.html
index b3982665..0cc3a875 100644
--- a/docs/api/html/settings-ethtool.html
+++ b/docs/api/html/settings-ethtool.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 78. 

+
Table 79. 

 

 
 

 
diff --git a/docs/api/html/settings-generic.html b/docs/api/html/settings-generic.html
index 4d91d6cc..b6b24691 100644
--- a/docs/api/html/settings-generic.html
+++ b/docs/api/html/settings-generic.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 79. 

+
Table 80. 

 

 
 

 
diff --git a/docs/api/html/settings-gsm.html b/docs/api/html/settings-gsm.html
index 46be0d96..2c4787c5 100644
--- a/docs/api/html/settings-gsm.html
+++ b/docs/api/html/settings-gsm.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 80. 

+
Table 81. 

 

 
 

 
diff --git a/docs/api/html/settings-infiniband.html b/docs/api/html/settings-infiniband.html
index 3bce1836..71765f71 100644
--- a/docs/api/html/settings-infiniband.html
+++ b/docs/api/html/settings-infiniband.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 81. 

+
Table 82. 

 

 
 

 
diff --git a/docs/api/html/settings-ip-tunnel.html b/docs/api/html/settings-ip-tunnel.html
index 20f93bd9..9002d6c3 100644
--- a/docs/api/html/settings-ip-tunnel.html
+++ b/docs/api/html/settings-ip-tunnel.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 84. 

+
Table 85. 

 

 
 

 
diff --git a/docs/api/html/settings-ipv4.html b/docs/api/html/settings-ipv4.html
index 5f98dd5e..cc51c04f 100644
--- a/docs/api/html/settings-ipv4.html
+++ b/docs/api/html/settings-ipv4.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 82. 

+
Table 83. 

 

 
 

 
@@ -62,7 +62,7 @@
 
-
+
@@ -104,25 +104,25 @@
 
-
+
-
+
-
+
-
+
@@ -153,7 +153,7 @@
 
-
+
@@ -182,7 +182,7 @@
 
-
+
diff --git a/docs/api/html/settings-ipv6.html b/docs/api/html/settings-ipv6.html
index 76758030..5ccff62c 100644
--- a/docs/api/html/settings-ipv6.html
+++ b/docs/api/html/settings-ipv6.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 83. 

+
Table 84. 

 

 
 


 
addresses

 
array of array of uint32
[]

 Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv4 address structures.  Each IPv4 address structure is composed of 3 32-bit values; the first being the IPv4 address (network byte order), the second the prefix (1 - 32), and last the IPv4 gateway (network byte order). The gateway may be left as 0 if no gateway exists for that subnet.
 

 

 
dns

 
array of uint32
[]

 Array of IP addresses of DNS servers (as network-byte-order integers)
 

 

 
dns-options

 
array of string
[]

 Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.
 

 

 
dns-priority

 
int32

 
0
DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
 

 

 
dns-search

 
array of string
[]

 Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
 

 
method

 
string

 
IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
 

 

 
never-default

 
routes

 
array of array of uint32
[]

 Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv4 route structures.  Each IPv4 route structure is composed of 4 32-bit values; the first being the destination IPv4 network or address (network byte order), the second the destination network or address prefix (1 - 32), the third being the next-hop (network byte order) if any, and the fourth being the route metric. If the metric is 0, NM will choose an appropriate default metric for the device. (There is no way to explicitly specify an actual metric of 0 with this property.)
 

 
 
@@ -68,7 +68,7 @@
 
-
+
@@ -104,25 +104,25 @@
 
-
+
-
+
-
+
-
+
@@ -159,7 +159,7 @@
 
-
+
@@ -188,7 +188,7 @@
 
-
+
diff --git a/docs/api/html/settings-macsec.html b/docs/api/html/settings-macsec.html
index 6ffb812f..96c6940e 100644
--- a/docs/api/html/settings-macsec.html
+++ b/docs/api/html/settings-macsec.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 85. 

+
Table 86. 

 

 
 


 
addresses

 
array of legacy IPv6 address struct (a(ayuay))
[]

 Deprecated in favor of the 'address-data' and 'gateway' properties, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'address-data' and 'gateway'.  Array of IPv6 address structures.  Each IPv6 address structure is composed of an IPv6 address, a prefix length (1 - 128), and an IPv6 gateway address. The gateway may be zeroed out if no gateway exists for that subnet.
 

 

 
dns

 
array of byte array
[]

 Array of IP addresses of DNS servers (in network byte order)
 

 

 
dns-options

 
array of string
[]

 Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties.
 

 

 
dns-priority

 
int32

 
0
DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.DNS servers priority. The relative priority for DNS servers specified by this setting.  A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections.  It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf.  To prioritize a given server over another one within the same connection, just specify them in the desired order.  When multiple devices have configurations with the same priority, the one with an active default route will be preferred.  Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports Conditional Forwarding as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list.  Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually).  When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins.  If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored.
 

 

 
dns-search

 
array of string
[]

 Array of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names.
 

 
method

 
string

 
IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration.  The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared.
 

 

 
never-default

 
routes

 
array of legacy IPv6 route struct (a(ayuayu))
[]

 Deprecated in favor of the 'route-data' property, but this can be used for backward-compatibility with older daemons. Note that if you send this property the daemon will ignore 'route-data'.  Array of IPv6 route structures.  Each IPv6 route structure is composed of an IPv6 address, a prefix length (1 - 128), an IPv6 next hop address (which may be zeroed out if there is no next hop), and a metric. If the metric is 0, NM will choose an appropriate default metric for the device.
 

 

 
diff --git a/docs/api/html/settings-macvlan.html b/docs/api/html/settings-macvlan.html
index acd81695..0e313299 100644
--- a/docs/api/html/settings-macvlan.html
+++ b/docs/api/html/settings-macvlan.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 86. 

+
Table 87. 

 

 
 

 
diff --git a/docs/api/html/settings-match.html b/docs/api/html/settings-match.html
index a7e6b153..31d4c9a2 100644
--- a/docs/api/html/settings-match.html
+++ b/docs/api/html/settings-match.html
@@ -38,7 +38,7 @@
             Properties
         

-
Table 87. 

+
Table 88. 

 

 
 

 
@@ -55,7 +55,7 @@
 
-
+

 
 


 
interface-name

 
array of string
[]

 A list of interface names to match. Each element is a shell wildcard pattern.  When an element is prefixed with exclamation mark (!) the condition is inverted. A candidate interface name is considered matching when both these conditions are satisfied: (a) any of the elements not prefixed with '!' matches or there aren't such elements; (b) none of the elements prefixed with '!' match.
 

 

diff --git a/docs/api/html/settings-ovs-bridge.html b/docs/api/html/settings-ovs-bridge.html
index 2424e29f..4b29061f 100644
--- a/docs/api/html/settings-ovs-bridge.html
+++ b/docs/api/html/settings-ovs-bridge.html
@@ -7,7 +7,7 @@
 
 
 
-
+
 
 
 
@@ -22,7 +22,7 @@
 
Home
 Up
 PrevNextNext
 

 

 

@@ -38,7 +38,7 @@
             Properties
         
 

-
Table 89. 

+
Table 90. 

 
@@ -54,6 +54,12 @@
 
+
+
+
+
+
+
diff --git a/docs/api/html/settings-ovs-dpdk.html b/docs/api/html/settings-ovs-dpdk.html
new file mode 100644
index 00000000..255016d2
--- /dev/null
+++ b/docs/api/html/settings-ovs-dpdk.html
@@ -0,0 +1,69 @@
+
+
+
+
+ovs-dpdk: NetworkManager Reference Manual
+
+
+
+
+
+
+
+
+
+

 
 

 
 
datapath-type
string
The data path type. One of "system", "netdev" or empty.

 
fail-mode

 
string

 

+
+
+
+
+
+
+

+

+

+
+
+

+
ovs-dpdk

+
ovs-dpdk — OvsDpdk Link Settings

+

+

+

+            Properties
+        

+

+
Table 91. 

+

++++++
+
+
+
+
+
+
+
+
+
+
+
+
+






Key NameValue TypeDefault ValueValue Description
devargs
string
Open vSwitch DPDK device arguments.

+

+


+

+

+

+
Generated by GTK-Doc V1.29

+
+
\ No newline at end of file
diff --git a/docs/api/html/settings-ovs-interface.html b/docs/api/html/settings-ovs-interface.html
index d373f6d8..f55590a3 100644
--- a/docs/api/html/settings-ovs-interface.html
+++ b/docs/api/html/settings-ovs-interface.html
@@ -6,7 +6,7 @@
 
 
 
-
+
 
 
 
@@ -21,7 +21,7 @@
 
 Home
 Up
-Prev
+Prev
 Next
 
 

@@ -34,11 +34,11 @@
 
 

 

-

+

             Properties
         

 

-
Table 90. 

+
Table 92. 

 
@@ -56,7 +56,7 @@
 
-
+

 
 

type

 
string

 
The interface type. Either "internal", or empty.The interface type. Either "internal", "system", "patch", "dpdk", or empty.
 

 

 

diff --git a/docs/api/html/settings-ovs-patch.html b/docs/api/html/settings-ovs-patch.html
index e3750cba..882788bd 100644
--- a/docs/api/html/settings-ovs-patch.html
+++ b/docs/api/html/settings-ovs-patch.html
@@ -34,11 +34,11 @@
 
 

 

-

+

             Properties
         

 

-
Table 91. 

+
Table 93. 

 
diff --git a/docs/api/html/settings-ovs-port.html b/docs/api/html/settings-ovs-port.html
index f4acdf36..a05ca7cb 100644
--- a/docs/api/html/settings-ovs-port.html
+++ b/docs/api/html/settings-ovs-port.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 92. 

+
Table 94. 

 
diff --git a/docs/api/html/settings-ppp.html b/docs/api/html/settings-ppp.html
index fc303a85..a70e3d31 100644
--- a/docs/api/html/settings-ppp.html
+++ b/docs/api/html/settings-ppp.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 93. 

+
Table 95. 

 
diff --git a/docs/api/html/settings-pppoe.html b/docs/api/html/settings-pppoe.html
index 8b1ce2ac..b9326d68 100644
--- a/docs/api/html/settings-pppoe.html
+++ b/docs/api/html/settings-pppoe.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 94. 

+
Table 96. 

 
diff --git a/docs/api/html/settings-proxy.html b/docs/api/html/settings-proxy.html
index 0b4da901..da571e32 100644
--- a/docs/api/html/settings-proxy.html
+++ b/docs/api/html/settings-proxy.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 95. 

+
Table 97. 

 
diff --git a/docs/api/html/settings-serial.html b/docs/api/html/settings-serial.html
index a634b3c7..c9cd34b1 100644
--- a/docs/api/html/settings-serial.html
+++ b/docs/api/html/settings-serial.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 96. 

+
Table 98. 

 
diff --git a/docs/api/html/settings-sriov.html b/docs/api/html/settings-sriov.html
index 8c422e7e..56ee6e55 100644
--- a/docs/api/html/settings-sriov.html
+++ b/docs/api/html/settings-sriov.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 97. 

+
Table 99. 

 
@@ -68,7 +68,7 @@
 
-
+
diff --git a/docs/api/html/settings-tc.html b/docs/api/html/settings-tc.html
index 0668fef4..505c7c8c 100644
--- a/docs/api/html/settings-tc.html
+++ b/docs/api/html/settings-tc.html
@@ -34,11 +34,11 @@
 

 
 


 
vfs

 
array of vardict
[]

 Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad.
 

 

 

 

-

+

             Properties
         

 

-
Table 98. 

+
Table 100. 

 
@@ -56,13 +56,13 @@
 
-
+
-
+
diff --git a/docs/api/html/settings-team-port.html b/docs/api/html/settings-team-port.html
index c972a583..a38313a7 100644
--- a/docs/api/html/settings-team-port.html
+++ b/docs/api/html/settings-team-port.html
@@ -34,11 +34,11 @@
 

 
 


 
qdiscs

 
array of vardict
[]

 Array of TC queueing disciplines.
 

 

 
tfilters

 
array of vardict
[]

 Array of TC traffic filters.
 

 

 

 

-

+

             Properties
         

 

-
Table 100. 

+
Table 102. 

 
@@ -62,19 +62,19 @@
 
-
+
-
+
-
+
diff --git a/docs/api/html/settings-team.html b/docs/api/html/settings-team.html
index b3a38e24..5965e831 100644
--- a/docs/api/html/settings-team.html
+++ b/docs/api/html/settings-team.html
@@ -34,11 +34,11 @@
 

 
 


 
lacp-key

 
int32
0
-1

 Corresponds to the teamd ports.PORTIFNAME.lacp_key.
 

 

 
lacp-prio

 
int32
255
-1

 Corresponds to the teamd ports.PORTIFNAME.lacp_prio.
 

 

 
link-watchers

 
array of vardict
[]

 Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
 

 

 

 

-

+

             Properties
         

 

-
Table 99. 

+
Table 101. 

 
@@ -68,43 +68,43 @@
 
-
+
-
+
-
+
-
+
-
+
-
-
+
+
-
+
@@ -152,7 +152,7 @@
 
-
+
diff --git a/docs/api/html/settings-tun.html b/docs/api/html/settings-tun.html
index 86d12d8b..9ffd48e3 100644
--- a/docs/api/html/settings-tun.html
+++ b/docs/api/html/settings-tun.html
@@ -34,11 +34,11 @@
 

 
 


 
link-watchers

 
array of vardict
[]

 Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are:   ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details.
 

 

 
mcast-rejoin-count

 
int32
0
-1

 Corresponds to the teamd mcast_rejoin.count.
 

 

 
mcast-rejoin-interval

 
int32
0
-1

 Corresponds to the teamd mcast_rejoin.interval.
 

 

 
notify-peers-count

 
int32
0
-1

 Corresponds to the teamd notify_peers.count.
 

 

 
notify-peers-interval

 
int32
0
-1

 Corresponds to the teamd notify_peers.interval.
 

 

 
runner

 
string
"roundrobin"
Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random". When setting the runner, all the properties specific to the runner will be reset to the default value; all the properties specific to other runners will be set to an empty value (or if not possible to a default value).
Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random".
 

 

 
runner-active

 
boolean
FALSE
TRUE

 Corresponds to the teamd runner.active.
 

 

 
runner-tx-hash

 
array of string
[]

 Corresponds to the teamd runner.tx_hash.
 

 

 

 

-

+

             Properties
         

 

-
Table 101. 

+
Table 103. 

 
diff --git a/docs/api/html/settings-user.html b/docs/api/html/settings-user.html
index 6a511b08..e1f48e0d 100644
--- a/docs/api/html/settings-user.html
+++ b/docs/api/html/settings-user.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 102. 

+
Table 104. 

 
diff --git a/docs/api/html/settings-vlan.html b/docs/api/html/settings-vlan.html
index 61c4b630..24036f54 100644
--- a/docs/api/html/settings-vlan.html
+++ b/docs/api/html/settings-vlan.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 103. 

+
Table 105. 

 
@@ -56,7 +56,7 @@
 
-
+
@@ -74,7 +74,7 @@
 
-
+
diff --git a/docs/api/html/settings-vpn.html b/docs/api/html/settings-vpn.html
index f94e1c15..847a551f 100644
--- a/docs/api/html/settings-vpn.html
+++ b/docs/api/html/settings-vpn.html
@@ -34,11 +34,11 @@
 

 
 


 
egress-priority-map

 
array of string
[]

 For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
 

 

 
ingress-priority-map

 
array of string
[]

 For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities.  The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3".
 

 

 

 

-

+

             Properties
         

 

-
Table 104. 

+
Table 106. 

 
diff --git a/docs/api/html/settings-vxlan.html b/docs/api/html/settings-vxlan.html
index 2891c893..75469fbb 100644
--- a/docs/api/html/settings-vxlan.html
+++ b/docs/api/html/settings-vxlan.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 105. 

+
Table 107. 

 
diff --git a/docs/api/html/settings-wifi-p2p.html b/docs/api/html/settings-wifi-p2p.html
index ad66d6b6..ccc36c10 100644
--- a/docs/api/html/settings-wifi-p2p.html
+++ b/docs/api/html/settings-wifi-p2p.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 106. 

+
Table 108. 

 
diff --git a/docs/api/html/settings-wimax.html b/docs/api/html/settings-wimax.html
index bcbab4e4..3dd4c49b 100644
--- a/docs/api/html/settings-wimax.html
+++ b/docs/api/html/settings-wimax.html
@@ -34,11 +34,11 @@
 

 
 


 

 

-

+

             Properties
         

 

-
Table 107. 

+
Table 109. 

 
diff --git a/docs/api/html/settings-wireguard.html b/docs/api/html/settings-wireguard.html
index 99261f39..1c546cb2 100644
--- a/docs/api/html/settings-wireguard.html
+++ b/docs/api/html/settings-wireguard.html
@@ -29,16 +29,16 @@
 

 
 


 
 
wireguard

-
wireguard — WireGuard Ethernet Settings

+
wireguard — WireGuard Settings

 		
 
 

 

-

+

             Properties
         

 

-
Table 109. 

+
Table 111. 

 
@@ -57,7 +57,19 @@
 
-
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/docs/api/html/settings-wpan.html b/docs/api/html/settings-wpan.html
index 41339fd1..68fa98b0 100644
--- a/docs/api/html/settings-wpan.html
+++ b/docs/api/html/settings-wpan.html
@@ -34,11 +34,11 @@
 

 
 

fwmark

 
uint32

 
0
The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets. Note that "ip4-auto-default-route" or "ip6-auto-default-route" enabled, implies to automatically choose a fwmark.
ip4-auto-default-route
NMTernary (int32)
Whether to enable special handling of the IPv4 default route. If enabled, the IPv4 default route will be placed to a dedicated routing-table and two policy routing rules will be added. The fwmark number is also used as routing-table for the default-route, and if fwmark is zero, a unused fwmark/table is chosen automatically. This corresponds to what wg-quick does with Table=auto. Leaving this at the default will enable this option automatically if ipv4.never-default is not set and there are any peers that use a default-route as allowed-ips.
ip6-auto-default-route
NMTernary (int32)
Like ip4-auto-default-route, but for the IPv6 default route.
 

 

 
listen-port

 

 

-

+

             Properties
         

 

-
Table 112. 

+
Table 114. 

 
-- 
cgit 1.3.0-6-gf8a5