From 9f806e97a24bba61417ae312fcc0da40914266fb Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Wed, 4 May 2011 21:35:41 +0200 Subject: Imported Upstream version 0.8.999 --- docs/api/html/spec.html | 1390 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1390 insertions(+) create mode 100644 docs/api/html/spec.html (limited to 'docs/api/html/spec.html') diff --git a/docs/api/html/spec.html b/docs/api/html/spec.html new file mode 100644 index 00000000..5bb127d4 --- /dev/null +++ b/docs/api/html/spec.html @@ -0,0 +1,1390 @@ + +NetworkManager D-Bus Interface Specification version 0.9

NetworkManager D-Bus Interface Specification

Version 0.9

Copyright (C) 2008 - 2011 Red Hat, Inc.
Copyright (C) 2008 - 2009 Novell, Inc.
+

This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version.

+ +

This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details.

+ +

You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

+

Interfaces

+

org.freedesktop.NetworkManager

Methods:

GetDevices ( + + ) → + ao

+ Get the list of network devices. +

Returns

devices - + ao
+ List of object paths of network devices known to the system. +

GetDeviceByIpIface ( + s: iface + ) → + o

+ Return the object path of the network device referenced by its IP + interface name. Note that some devices (usually modems) only have an + IP interface name when they are connected. +

Parameters

iface - + s
+ Interface name of the device to find. +

Returns

device - + o
+ Object path of the network device. +

ActivateConnection ( + o: connection, o: device, o: specific_object + ) → + o

+ Activate a connection using the supplied device. +

Parameters

connection - + o
+ The connection to activate the devices with. +
device - + o
+ The object path of device to be activated for physical connections. This parameter is ignored for VPN connections, because the specific_object (if provided) specifies the device to use. +
specific_object - + o
+ The path of a connection-type-specific object this activation should use. + This parameter is currently ignored for wired and mobile broadband connections, + and the value of "/" should be used (ie, no specific object). For WiFi + connections, pass the object path of a specific AP from the card's scan + list, or "/" to pick and AP automatically. For VPN connections, pass + the object path of an ActiveConnection object that should serve as the + "base" connection (to which the VPN connections lifetime will be tied), + or pass "/" and NM will automatically use the current default device. +

Returns

active_connection - + o
+ The path of the active connection object representing this active connection. +

Possible errors

org.freedesktop.NetworkManager.Error.UnknownConnection
+ Connection was not provided by the settings service. + (generic description)
org.freedesktop.NetworkManager.Error.UnknownDevice
+ Unknown device. + (generic description)
org.freedesktop.NetworkManager.Error.ConnectionActivating
Another connection is already activating or the same connection is already active. FIXME: check if the error name is correct. FIXME: split into 2 errors?
org.freedesktop.NetworkManager.Error.ConnectionInvalid
The connection is invalid for this device.

AddAndActivateConnection ( + a{sa{sv}}: connection, o: device, o: specific_object + ) → + o, o

+ Adds a new connection using the given details (if any) as a template + (automatically filling in missing settings with the capabilities of the + given device and specific object), then activate the new connection. + Cannot be used for VPN connections at this time. +

Parameters

connection - + a{sa{sv}}
+ Connection settings and properties; if incomplete missing settings will + be automatically completed using the given device and specific object. +
device - + o
+ The object path of device to be activated using the given connection. +
specific_object - + o
+ The path of a connection-type-specific object this activation should use. + This parameter is currently ignored for wired and mobile broadband connections, + and the value of "/" should be used (ie, no specific object). For WiFi + connections, pass the object path of a specific AP from the card's scan + list, which will be used to complete the details of the newly added + connection. +

Returns

path - + o
+ Object path of the new connection that was just added. +
active_connection - + o
+ The path of the active connection object representing this active connection. +

Possible errors

org.freedesktop.NetworkManager.Error.UnknownConnection
+ Connection was not provided by the settings service. + (generic description)
org.freedesktop.NetworkManager.Error.UnknownDevice
+ Unknown device. + (generic description)
org.freedesktop.NetworkManager.Error.ConnectionInvalid
The connection is invalid for this device.

DeactivateConnection ( + o: active_connection + ) → + nothing

+ Deactivate an active connection. +

Parameters

active_connection - + o
+ The currently active connection to deactivate. +

Sleep ( + b: sleep + ) → + nothing

+ Control the NetworkManager daemon's sleep state. When asleep, all + interfaces that it manages are deactivated. When awake, devices are + available to be activated. This command should not be called directly + by users or clients; it is intended for system suspend/resume tracking. +

Parameters

sleep - + b
+ Indicates whether the NetworkManager daemon should sleep or wake. +

Enable ( + b: enable + ) → + nothing

+ Control whether overall networking is enabled or disabled. When + disabled, all interfaces that NM manages are deactivated. When enabled, + all managed interfaces are re-enabled and available to be activated. + This command should be used by clients that provide to users the ability + to enable/disable all networking. +

Parameters

enable - + b
+ If FALSE, indicates that all networking should be disabled. If TRUE, + indicates that NetworkManager should begin managing network devices. +

GetPermissions ( + + ) → + a{ss}

+ Returns the permissions a caller has for various authenticated operations + that NetworkManager provides, like Enable/Disable networking, changing + WiFi, WWAN, and WiMAX state, etc. +

Returns

permissions - + a{ss}
+ Dictionary of available permissions and results. Each permission + is represented by a name (ie "org.freedesktop.NetworkManager.Foobar") + and each result is one of the following values: "yes" (the permission + is available), "auth" (the permission is available after a successful + authentication), or "no" (the permission is denied). Clients may use + these values in the UI to indicate the ability to perform certain + operations. +

SetLogging ( + s: level, s: domains + ) → + nothing

+ Set logging verbosity and which operations are logged. +

Parameters

level - + s
+ One of [ERR, WARN, INFO, DEBUG]. +
domains - + s
+ A combination of logging domains separated by commas (','), or "NONE" + to disable logging. Each domain enables logging for operations + related to that domain. Available domains are: [NONE, HW, RFKILL, + ETHER, WIFI, BT, MB, DHCP4, DHCP6, PPP, WIFI_SCAN, IP4, IP6, AUTOIP4, + DNS, VPN, SHARING, SUPPLICANT, USER_SET, SYS_SET, SUSPEND, CORE, + DEVICE, OLPC] +

state ( + + ) → + u

+ The overall networking state as determined by the NetworkManager daemon, + based on the state of network devices under it's management. +

Returns

state - + u + (NM_STATE) +

Signals:

CheckPermissions ( + + )

+ Emitted when system authorization details change, indicating that + clients may wish to recheck permissions with GetPermissions. +

StateChanged ( + u: state + )

+ NetworkManager's state changed. +

Parameters

state - + u + (NM_STATE) +
+ The new state of NetworkManager. +

PropertiesChanged ( + a{sv}: properties + )

+ NetworkManager's properties changed. +

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ The changed properties. +

DeviceAdded ( + o: device_path + )

+ A device was added to the system +

Parameters

device_path - + o
+ The object path of the newly added device. +

DeviceRemoved ( + o: device_path + )

+ A device was removed from the system, and is no longer available. +

Parameters

device_path - + o
+ The object path of the device that was just removed. +

Properties:

NetworkingEnabled - + b - + (read)
+ Indicates if overall networking is currently enabled or not. See the + Enable() method. +
WirelessEnabled - + b - + (readwrite)
+ Indicates if wireless is currently enabled or not. +
WirelessHardwareEnabled - + b - + (read)
+ Indicates if the wireless hardware is currently enabled, i.e. the state of the RF kill switch. +
WwanEnabled - + b - + (readwrite)
+ Indicates if mobile broadband devices are currently enabled or not. +
WwanHardwareEnabled - + b - + (read)
+ Indicates if the mobile broadband hardware is currently enabled, i.e. the state of the RF kill switch. +
WimaxEnabled - + b - + (readwrite)
+ Indicates if WiMAX devices are currently enabled or not. +
WimaxHardwareEnabled - + b - + (read)
+ Indicates if the WiMAX hardware is currently enabled, i.e. the state of the RF kill switch. +
ActiveConnections - + ao - + (read)
+ List of active connection object paths. +
Version - + s - + (read)
+ NetworkManager version. +
State - + u - + (read) + (NM_STATE) +
+ The overall state of the NetworkManager daemon. +

Enumerated types:

NM_STATE

+ Describes the overall state of the daemon. +
NM_STATE_UNKNOWN = 0
+ Networking state is unknown. +
NM_STATE_ASLEEP = 10
+ Networking is inactive and all devices are disabled. +
NM_STATE_DISCONNECTED = 20
+ There is no active network connection. +
NM_STATE_DISCONNECTING = 30
+ Network connections are being cleaned up. +
NM_STATE_CONNECTING = 40
+ A network device is connecting to a network and there is no other + available network connection. +
NM_STATE_CONNECTED_LOCAL = 50
+ A network device is connected, but there is only link-local connectivity. +
NM_STATE_CONNECTED_SITE = 60
+ A network device is connected, but there is only site-local connectivity. +
NM_STATE_CONNECTED_GLOBAL = 70
+ A network device is connected, with global network connectivity. +
+ +

org.freedesktop.NetworkManager.AccessPoint

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

Flags - + u - + (read) + (NM_802_11_AP_FLAGS) +
Flags describing the capabilities of the access point.
WpaFlags - + u - + (read) + (NM_802_11_AP_SEC) +
Flags describing the access point's capabilities according to WPA (Wifi Protected Access).
RsnFlags - + u - + (read) + (NM_802_11_AP_SEC) +
Flags describing the access point's capabilities according to the RSN (Robust Secure Network) protocol.
Ssid - + ay - + (read)
The Service Set Identifier identifying the access point.
Frequency - + u - + (read)
The radio channel frequency in use by the access point, in MHz.
HwAddress - + s - + (read)
The hardware address (BSSID) of the access point.
Mode - + u - + (read) + (NM_802_11_MODE) +
Describes the operating mode of the access point.
MaxBitrate - + u - + (read)
The maximum bitrate this access point is capable of, in kilobits/second (Kb/s).
Strength - + y - + (read)
The current signal quality of the access point, in percent.

Sets of flags:

NM_802_11_AP_FLAGS

+ Flags describing the general capabilities of the access point. +
NM_802_11_AP_FLAGS_NONE = 0x0
Null capability - says nothing about the access point.
NM_802_11_AP_FLAGS_PRIVACY = 0x1
Access point supports privacy measures.

NM_802_11_AP_SEC

+ Flags describing the security capabilities of the access point. +
NM_802_11_AP_SEC_NONE = 0x0
Null flag.
NM_802_11_AP_SEC_PAIR_WEP40 = 0x1
Access point supports pairwise 40-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_WEP104 = 0x2
Access point supports pairwise 104-bit WEP encryption.
NM_802_11_AP_SEC_PAIR_TKIP = 0x4
Access point supports pairwise TKIP encryption.
NM_802_11_AP_SEC_PAIR_CCMP = 0x8
Access point supports pairwise CCMP encryption.
NM_802_11_AP_SEC_GROUP_WEP40 = 0x10
Access point supports a group 40-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_WEP104 = 0x20
Access point supports a group 104-bit WEP cipher.
NM_802_11_AP_SEC_GROUP_TKIP = 0x40
Access point supports a group TKIP cipher.
NM_802_11_AP_SEC_GROUP_CCMP = 0x80
Access point supports a group CCMP cipher.
NM_802_11_AP_SEC_KEY_MGMT_PSK = 0x100
Access point supports PSK key management.
NM_802_11_AP_SEC_KEY_MGMT_802_1X = 0x200
Access point supports 802.1x key management.
+ +

org.freedesktop.NetworkManager.Device

Methods:

Disconnect ( + + ) → + nothing

+ Disconnects a device and prevents the device from automatically activating further connections without user intervention. +

Signals:

StateChanged ( + u: new_state, u: old_state, u: reason + )

Parameters

new_state - + u + (NM_DEVICE_STATE) +
+ The new state of the device. +
old_state - + u + (NM_DEVICE_STATE) +
+ The previous state of the device. +
reason - + u + (NM_DEVICE_STATE_REASON) +
+ A reason for the state transition. +

Properties:

Udi - + s - + (read)
+ Operating-system specific transient device hardware identifier. This + is an opaque string representing the underlying hardware for the device, + and shouldn't be used to keep track of individual devices. For some + device types (Bluetooth, Modems) it is an identifier used by the + hardware service (ie bluez or ModemManager) to refer to that device, + and client programs use it get additional information from those + services which NM does not provide. The Udi is not guaranteed to be + consistent across reboots or hotplugs of the hardware. If you're looking + for a way to uniquely track each device in your application, use the + object path. If you're looking for a way to track a specific piece of + hardware across reboot or hotplug, use a MAC address or USB serial + number. +
Interface - + s - + (read)
+ The name of the device's control (and often data) interface. +
IpInterface - + s - + (read)
+ The name of the device's data interface when available. This property + may not refer to the actual data interface until the device has + successfully established a data connection, indicated by the device's + State becoming ACTIVATED. +
Driver - + s - + (read)
+ The driver handling the device. +
Capabilities - + u - + (read) + (NM_DEVICE_CAP) +
+ Flags describing the capabilities of the device. +
Ip4Address - + i - + (read)
+ The IPv4 address bound to the device. FIXME: what about devices with >1 IP address? +
State - + u - + (read) + (NM_DEVICE_STATE) +
+ The current state of the device. +
Ip4Config - + o - + (read)
+ Object path of the Ip4Config object describing the configuration of the device. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state. +
Dhcp4Config - + o - + (read)
+ Object path of the Dhcp4Config object describing the DHCP options returned by the DHCP server. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state. +
Ip6Config - + o - + (read)
+ Object path of the Ip6Config object describing the configuration of the device. Only valid when the device is in the NM_DEVICE_STATE_ACTIVATED state. +
Dhcp6Config - + o - + (read)
+ Object path of the Dhcp6Config object describing the DHCP options + returned by the DHCP server. Only valid when the device is in the + NM_DEVICE_STATE_ACTIVATED state. +
Managed - + b - + (read)
+ Whether or not this device is managed by NetworkManager. +
FirmwareMissing - + b - + (read)
+ If TRUE, indicates the device is likely missing firmware necessary for + its operation. +
DeviceType - + u - + (read) + (NM_DEVICE_TYPE) +
+ The general type of the network device; ie Ethernet, WiFi, etc. +

Enumerated types:

NM_DEVICE_STATE

NM_DEVICE_STATE_UNKNOWN = 0
+ The device is in an unknown state. +
NM_DEVICE_STATE_UNMANAGED = 10
+ The device is recognized but not managed by NetworkManager. +
NM_DEVICE_STATE_UNAVAILABLE = 20
+ The device cannot be used (carrier off, rfkill, etc). +
NM_DEVICE_STATE_DISCONNECTED = 30
+ The device is not connected. +
NM_DEVICE_STATE_PREPARE = 40
+ The device is preparing to connect. +
NM_DEVICE_STATE_CONFIG = 50
+ The device is being configured. +
NM_DEVICE_STATE_NEED_AUTH = 60
+ The device is awaiting secrets necessary to continue connection. +
NM_DEVICE_STATE_IP_CONFIG = 70
+ The IP settings of the device are being requested and configured. +
NM_DEVICE_STATE_IP_CHECK = 80
+ The device's IP connectivity ability is being determined. +
NM_DEVICE_STATE_SECONDARIES = 90
+ The device is waiting for secondary connections to be activated. +
NM_DEVICE_STATE_ACTIVATED = 100
+ The device is active. +
NM_DEVICE_STATE_DEACTIVATING = 110
+ The device's network connection is being torn down. +
NM_DEVICE_STATE_FAILED = 120
+ The device is in a failure state following an attempt to activate it. +

NM_DEVICE_TYPE

NM_DEVICE_TYPE_UNKNOWN = 0
+ The device type is unknown. +
NM_DEVICE_TYPE_ETHERNET = 1
+ The device is wired Ethernet device. +
NM_DEVICE_TYPE_WIFI = 2
+ The device is an 802.11 WiFi device. +
NM_DEVICE_TYPE_UNUSED1 = 3
Unused
NM_DEVICE_TYPE_UNUSED2 = 4
Unused
NM_DEVICE_TYPE_BT = 5
+ The device is Bluetooth device that provides PAN or DUN capabilities. +
NM_DEVICE_TYPE_OLPC_MESH = 6
+ The device is an OLPC mesh networking device. +
NM_DEVICE_TYPE_WIMAX = 7
+ The device is an 802.16e Mobile WiMAX device. +
NM_DEVICE_TYPE_MODEM = 8
+ The device is a modem supporting one or more of analog telephone, + CDMA/EVDO, GSM/UMTS/HSPA, or LTE standards to access a cellular or + wireline data network. +

NM_DEVICE_STATE_REASON

NM_DEVICE_STATE_REASON_UNKNOWN = 0
+ The reason for the device state change is unknown. +
NM_DEVICE_STATE_REASON_NONE = 1
+ The state change is normal. +
NM_DEVICE_STATE_REASON_NOW_MANAGED = 2
+ The device is now managed. +
NM_DEVICE_STATE_REASON_NOW_UNMANAGED = 3
+ The device is no longer managed. +
NM_DEVICE_STATE_REASON_CONFIG_FAILED = 4
+ The device could not be readied for configuration. +
NM_DEVICE_STATE_REASON_CONFIG_UNAVAILABLE = 5
+ IP configuration could not be reserved (no available address, timeout, etc). +
NM_DEVICE_STATE_REASON_CONFIG_EXPIRED = 6
+ The IP configuration is no longer valid. +
NM_DEVICE_STATE_REASON_NO_SECRETS = 7
+ Secrets were required, but not provided. +
NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT = 8
+ The 802.1X supplicant disconnected from the access point or authentication server. +
NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED = 9
+ Configuration of the 802.1X supplicant failed. +
NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED = 10
+ The 802.1X supplicant quit or failed unexpectedly. +
NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT = 11
+ The 802.1X supplicant took too long to authenticate. +
NM_DEVICE_STATE_REASON_PPP_START_FAILED = 12
+ The PPP service failed to start within the allowed time. +
NM_DEVICE_STATE_REASON_PPP_DISCONNECT = 13
+ The PPP service disconnected unexpectedly. +
NM_DEVICE_STATE_REASON_PPP_FAILED = 14
+ The PPP service quit or failed unexpectedly. +
NM_DEVICE_STATE_REASON_DHCP_START_FAILED = 15
+ The DHCP service failed to start within the allowed time. +
NM_DEVICE_STATE_REASON_DHCP_ERROR = 16
+ The DHCP service reported an unexpected error. +
NM_DEVICE_STATE_REASON_DHCP_FAILED = 17
+ The DHCP service quit or failed unexpectedly. +
NM_DEVICE_STATE_REASON_SHARED_START_FAILED = 18
+ The shared connection service failed to start. +
NM_DEVICE_STATE_REASON_SHARED_FAILED = 19
+ The shared connection service quit or failed unexpectedly. +
NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED = 20
+ The AutoIP service failed to start. +
NM_DEVICE_STATE_REASON_AUTOIP_ERROR = 21
+ The AutoIP service reported an unexpected error. +
NM_DEVICE_STATE_REASON_AUTOIP_FAILED = 22
+ The AutoIP service quit or failed unexpectedly. +
NM_DEVICE_STATE_REASON_MODEM_BUSY = 23
+ Dialing failed because the line was busy. +
NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE = 24
+ Dialing failed because there was no dial tone. +
NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER = 25
+ Dialing failed because there was carrier. +
NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT = 26
+ Dialing timed out. +
NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED = 27
+ Dialing failed. +
NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED = 28
+ Modem initialization failed. +
NM_DEVICE_STATE_REASON_GSM_APN_FAILED = 29
+ Failed to select the specified GSM APN. +
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING = 30
+ Not searching for networks. +
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED = 31
+ Network registration was denied. +
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT = 32
+ Network registration timed out. +
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED = 33
+ Failed to register with the requested GSM network. +
NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED = 34
+ PIN check failed. +
NM_DEVICE_STATE_REASON_FIRMWARE_MISSING = 35
+ Necessary firmware for the device may be missing. +
NM_DEVICE_STATE_REASON_REMOVED = 36
+ The device was removed. +
NM_DEVICE_STATE_REASON_SLEEPING = 37
+ NetworkManager went to sleep. +
NM_DEVICE_STATE_REASON_CONNECTION_REMOVED = 38
+ The device's active connection was removed or disappeared. +
NM_DEVICE_STATE_REASON_USER_REQUESTED = 39
+ A user or client requested the disconnection. +
NM_DEVICE_STATE_REASON_CARRIER = 40
+ The device's carrier/link changed. +
NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED = 41
+ The device's existing connection was assumed. +
NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE = 42
+ The 802.1x supplicant is now available. +
NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND = 43
+ The modem could not be found. +
NM_DEVICE_STATE_REASON_BT_FAILED = 44
+ The Bluetooth connection timed out or failed. +

Sets of flags:

NM_DEVICE_CAP

NM_DEVICE_CAP_NONE = 0x0
Null capability.
NM_DEVICE_CAP_NM_SUPPORTED = 0x1
The device is supported by NetworkManager.
NM_DEVICE_CAP_CARRIER_DETECT = 0x2
The device supports carrier detection.
+ +

org.freedesktop.NetworkManager.Device.Wired

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

HwAddress - + s - + (read)
+ Active hardware address of the device. +
PermHwAddress - + s - + (read)
+ Permanent hardware address of the device. +
Speed - + u - + (read)
+ Design speed of the device, in megabits/second (Mb/s). +
Carrier - + b - + (read)
+ Indicates whether the physical carrier is found (e.g. whether a cable is plugged in or not). +
+ +

org.freedesktop.NetworkManager.Device.Wireless

Methods:

GetAccessPoints ( + + ) → + ao

+ Get the list of access points visible to this device. +

Returns

access_points - + ao
+ List of access point object paths +

Signals:

PropertiesChanged ( + a{sv}: properties + )

+ Emitted when the wireless device's properties changed. +

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary containing the FIXME: check changed parameters. +

AccessPointAdded ( + o: access_point + )

+ Emitted when a new access point is found by the device. +

Parameters

access_point - + o
+ The object path of the newly found access point. +

AccessPointRemoved ( + o: access_point + )

+ Emitted when an access point disappears from view of the device. +

Parameters

access_point - + o
+ The object path of the access point that has disappeared. +

Properties:

HwAddress - + s - + (read)
+ The active hardware address of the device. +
PermHwAddress - + s - + (read)
+ The permanent hardware address of the device. +
Mode - + u - + (read) + (NM_802_11_MODE) +
+ The operating mode of the wireless device. +
Bitrate - + u - + (read)
+ The bit rate currently used by the wireless device, in kilobits/second (Kb/s). +
ActiveAccessPoint - + o - + (read)
+ Object path of the access point currently used by the wireless device. +
WirelessCapabilities - + u - + (read) + (NM_802_11_DEVICE_CAP) +
+ The capabilities of the wireless device. +

Sets of flags:

NM_802_11_DEVICE_CAP

+ Flags describing the capabilities of a wireless device. +
NM_802_11_DEVICE_CAP_NONE = 0x0
Null capability - syntactic sugar for no capabilities supported. Do not AND this with other capabilities!
NM_802_11_DEVICE_CAP_CIPHER_WEP40 = 0x1
The device supports the 40-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_WEP104 = 0x2
The device supports the 104-bit WEP cipher.
NM_802_11_DEVICE_CAP_CIPHER_TKIP = 0x4
The device supports the TKIP cipher.
NM_802_11_DEVICE_CAP_CIPHER_CCMP = 0x8
The device supports the CCMP cipher.
NM_802_11_DEVICE_CAP_WPA = 0x10
The device supports the WPA encryption/authentication protocol.
NM_802_11_DEVICE_CAP_RSN = 0x20
The device supports the RSN encryption/authentication protocol.
+ +

org.freedesktop.NetworkManager.Device.Modem

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

ModemCapabilities - + u - + (read) + (NM_DEVICE_MODEM_CAPABILITIES) +
+ The generic family of access technologies the modem supports. Not all + capabilities are available at the same time however; some modems require + a firmware reload or other reinitialization to switch between eg CDMA/EVDO + and GSM/UMTS. +
CurrentCapabilities - + u - + (read) + (NM_DEVICE_MODEM_CAPABILITIES) +
+ The generic family of access technologies the modem currently supports + without a firmware reload or reinitialization. +

Sets of flags:

NM_DEVICE_MODEM_CAPABILITIES

+ Flags describing one or more of the general access technology families + that a modem device supports. +
NM_DEVICE_MODEM_CAPABILITY_NONE = 0x0
Modem has no capabilties.
NM_DEVICE_MODEM_CAPABILITY_POTS = 0x1
+ Modem supports the analog wired telephone network (ie 56k dialup) and + does not have wireless/cellular capabilities. +
NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO = 0x2
+ Modem supports at least one of CDMA 1xRTT, EVDO revision 0, EVDO + revision A, or EVDO revision B. +
NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS = 0x4
+ Modem supports at least one of GSM, GPRS, EDGE, UMTS, HSDPA, HSUPA, or + HSPA+ packet switched data capability. +
NM_DEVICE_MODEM_CAPABILITY_LTE = 0x8
+ Modem has at LTE data capability. +
+ +

org.freedesktop.NetworkManager.Device.Bluetooth

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

HwAddress - + s - + (read)
+ Bluetooth hardware address of the device. +
Name - + s - + (read)
+ Bluetooth name of the device. +
BtCapabilities - + u - + (read) + (NM_BT_CAPABILITIES) +
+ Bluetooth capabilities of the device (either DUN or NAP). +

Sets of flags:

NM_BT_CAPABILITIES

+ Flags describing the capabilities of a Bluetooth device. +
NM_BT_CAPABILITY_NONE = 0x0
The device has no recognized capabilities.
NM_BT_CAPABILITY_DUN = 0x1
The device supports Bluetooth Dial-Up Networking.
NM_BT_CAPABILITY_PAN = 0x2
The device supports Bluetooth Personal Area Networking.
+ +

org.freedesktop.NetworkManager.Device.OlpcMesh

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

+ Emitted when the wireless device's properties changed. +

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary containing the FIXME: check changed parameters. +

Properties:

HwAddress - + s - + (read)
+ The hardware address of the device. +
Companion - + o - + (read)
+ The object path of the companion device. +
ActiveChannel - + u - + (read)
+ The currently active channel. +
+ +

org.freedesktop.NetworkManager.Device.WiMax

Methods:

GetNspList ( + + ) → + ao

+ Get the list of NSPs visible to this device. +

Returns

nsps - + ao
+ List of NSP object paths +

Signals:

PropertiesChanged ( + a{sv}: properties + )

+ Emitted when the WiMax device's properties changed. +

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values. +

NspAdded ( + o: nsp + )

+ Emitted when a new NSP is found by the device. +

Parameters

nsp - + o
+ The object path of the newly found NSP. +

NspRemoved ( + o: nsp + )

+ Emitted when an NSP disappears from view of the device. +

Parameters

nsp - + o
+ The object path of the NSP that has disappeared. +

Properties:

HwAddress - + s - + (read)
+ Hardware address of the device. +
CenterFrequency - + u - + (read)
+ Center frequency (in KHz) of the radio channel the device is using to + communicate with the network when connected. Has no meaning when the + device is not connected. +
Rssi - + i - + (read)
+ RSSI of the current radio link in dBm. This value indicates how strong + the raw received RF signal from the base station is, but does not + indicate the overall quality of the radio link. Has no meaning when the + device is not connected. +
Cinr - + i - + (read)
+ CINR (Carrier to Interference + Noise Ratio) of the current radio link + in dB. CINR is a more accurate measure of radio link quality. Has no + meaning when the device is not connected. +
TxPower - + i - + (read)
+ Average power of the last burst transmitted by the device, in units of + 0.5 dBm. i.e. a TxPower of -11 represents an actual device TX power of + -5.5 dBm. Has no meaning when the device is not connected. +
Bsid - + s - + (read)
+ The ID of the serving base station as received from the network. Has + no meaning when the device is not connected. +
ActiveNsp - + o - + (read)
+ Object path of the NSP currently used by the WiMax device. +
+ +

org.freedesktop.NetworkManager.WiMax.Nsp

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values. +

Properties:

Name - + s - + (read)
The name of the NSP.
SignalQuality - + u - + (read)
The current signal quality of the NSP, in percent.
NetworkType - + u - + (read) + (NM_WIMAX_NSP_NETWORK_TYPE) +
The network type of the NSP.

Sets of flags:

NM_WIMAX_NSP_NETWORK_TYPE

+ Network type of the NSP. +
NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN = 0x0
Unknown network.
NM_WIMAX_NSP_NETWORK_TYPE_HOME = 0x1
Home network.
NM_WIMAX_NSP_NETWORK_TYPE_PARTNER = 0x2
Partner network.
NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER = 0x3
Roaming partner network.
+ +

org.freedesktop.NetworkManager.IP4Config

Interface has no methods.

Interface has no signals.

Properties:

Addresses - + aau - + (read)
Array of tuples of IPv4 address/prefix/gateway. All 3 + elements of each tuple are in network byte order. Essentially: + [(addr, prefix, gateway), (addr, prefix, gateway), ...] +
Nameservers - + au - + (read)
The nameservers in use.
WinsServers - + au - + (read)
The Windows Internet Name Service servers associated with the connection. Each address is in network byte order.
Domains - + as - + (read)
A list of domains this address belongs to.
Routes - + aau - + (read)
Tuples of IPv4 route/prefix/next-hop/metric. All 4 elements + of each tuple are in network byte order. 'route' and 'next hop' are IPv4 + addresses, while prefix and metric are simple unsigned integers. Essentially: + [(route, prefix, next-hop, metric), (route, prefix, next-hop, metric), ...] +
+ +

org.freedesktop.NetworkManager.IP6Config

Interface has no methods.

Interface has no signals.

Properties:

Addresses - + a(ayuay) - + (read)
Tuples of IPv6 address/prefix/gateway.
Nameservers - + aay - + (read)
The nameservers in use.
Domains - + as - + (read)
A list of domains this address belongs to.
Routes - + a(ayuayu) - + (read)
Tuples of IPv6 route/prefix/next-hop/metric.
+ +

org.freedesktop.NetworkManager.DHCP4Config

+ Options and configuration returned by the IPv4 DHCP server. +

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

Options - + a{sv} - + (read)
Configuration options returned by a DHCP server, if any.
+ +

org.freedesktop.NetworkManager.DHCP6Config

+ Options and configuration returned by the IPv6 DHCP server. +

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

Options - + a{sv} - + (read)
Configuration options returned by a DHCP server, if any.
+ +

org.freedesktop.NetworkManager.Settings

+ The Settings interface allows clients to view and administrate the connections stored and used by NetworkManager. +

Methods:

ListConnections ( + + ) → + ao

+ List the connections stored by this Settings object. +

Returns

connections - + ao
+ List of connections. +

GetConnectionByUuid ( + s: uuid + ) → + o

+ Retrieve the object path of a connection, given that connection's UUID. +

Parameters

uuid - + s
+ The UUID to find the connection object path for. +

Returns

connection - + o
+ The connection's object path. +

AddConnection ( + a{sa{sv}}: connection + ) → + o

+ Add new connection. +

Parameters

connection - + a{sa{sv}}
+ Connection settings and properties. +

Returns

path - + o
+ Object path of the new connection that was just added. +

SaveHostname ( + s: hostname + ) → + nothing

+ Save the hostname to persistent configuration. +

Parameters

hostname - + s
+ The hostname to save to persistent configuration. If blank, the persistent hostname is cleared. +

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

NewConnection ( + o: connection + )

+ Emitted when a new connection has been added. +

Parameters

connection - + o
+ Object path of the new connection. +

Properties:

Hostname - + s - + (read)
+ The machine hostname stored in persistent configuration. +
CanModify - + b - + (read)
+ If true, adding and modifying connections is supported. +
+ + +

org.freedesktop.NetworkManager.Settings.Connection

+ Represents a single network connection configuration. +

Methods:

Update ( + a{sa{sv}}: properties + ) → + nothing

+ Update the connection with new settings and properties, replacing + all previous settings and properties. Secrets may be part of the + update request, and will be either stored in persistent storage or + given to a Secret Agent for storage, depending on the request. +

Parameters

properties - + a{sa{sv}}
+ New connection settings, properties, and (optionally) secrets. +

Delete ( + + ) → + nothing

+ Delete the connection. +

GetSettings ( + + ) → + a{sa{sv}}

+ Get the settings maps describing this network configuration. + This will never include any secrets required for connection + to the network, as those are often protected. Secrets must + be requested separately using the GetSecrets() call. +

Returns

settings - + a{sa{sv}} + (String_String_Variant_Map_Map) +
+ The nested settings maps describing this object. +

GetSecrets ( + s: setting_name + ) → + a{sa{sv}}

+ Get the secrets belonging to this network configuration. Only + secrets from persistent storage or a Secret Agent running in + the requestor's session will be returned. The user will never + be prompted for secrets as a result of this request. +

Parameters

setting_name - + s
+ Name of the setting to return secrets for. If empty, all + all secrets will be returned. +

Returns

secrets - + a{sa{sv}} + (String_String_Variant_Map_Map) +
+ Nested settings maps containing secrets. +

Signals:

Updated ( + + )

+ Emitted when any settings or permissions change. When handling + this signal, clients should re-read the connection using the + GetSettings method to get the changes and to ensure the client + still has permission to access the connection. +

Removed ( + + )

+ Emitted when this connection is no longer available. This + happens when the connection is deleted or if it is no longer + accessable by any of the system's logged-in users. After + receipt of this signal, the object no longer exists. +

Interface has no properties.

+ + +

org.freedesktop.NetworkManager.Connection.Active

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

Properties:

Connection - + o - + (read)
The path of the connection.
SpecificObject - + o - + (read)
A specific object associated with the active connection.
Uuid - + s - + (read)
+ The UUID of the connection, provided as a convenience so that clients + do not have to retrieve all connection details. +
Devices - + ao - + (read)
Array of object paths representing devices which are part of this active connection.
State - + u - + (read) + (NM_ACTIVE_CONNECTION_STATE) +
The state of this active connection.
Default - + b - + (read)
Whether this active connection is the default IPv4 connection, i.e. whether it currently owns the default IPv4 route.
Default6 - + b - + (read)
Whether this active connection is the default IPv6 connection, i.e. whether it currently owns the default IPv6 route.
Vpn - + b - + (read)
Whether this active connection is also a VPN connection.

Enumerated types:

NM_ACTIVE_CONNECTION_STATE

NM_ACTIVE_CONNECTION_STATE_UNKNOWN = 0
+ The active connection is in an unknown state. +
NM_ACTIVE_CONNECTION_STATE_ACTIVATING = 1
+ The connection is activating. +
NM_ACTIVE_CONNECTION_STATE_ACTIVATED = 2
+ The connection is activated. +
NM_ACTIVE_CONNECTION_STATE_DEACTIVATING = 3
+ The connection is being torn down and cleaned up. +
+ +

org.freedesktop.NetworkManager.AgentManager

Methods:

Register ( + s: identifier + ) → + nothing

+ Called by secret Agents to register their ability to provide and save + network secrets. +

Parameters

identifier - + s
+ Identifies this agent; only one agent in each user session may use the + same identifier. Identifier formatting follows the same rules as + D-Bus bus names with the exception that the ':' character is not + allowed. The valid set of characters is "[A-Z][a-z][0-9]_-." and the + identifier is limited in length to 255 characters with a minimum + of 3 characters. An example valid identifier is 'org.gnome.nm-applet' + (without quotes). +

Unregister ( + + ) → + nothing

+ Called by secret Agents to notify NetworkManager that they will no + longer handle requests for network secrets. Agents are automatically + unregistered when they disconnect from D-Bus. +

Interface has no signals.

Interface has no properties.

+ +

org.freedesktop.NetworkManager.VPN.Connection

+ Represents an active connection to a Virtual Private Network. +

Interface has no methods.

Signals:

PropertiesChanged ( + a{sv}: properties + )

Parameters

properties - + a{sv} + (String_Variant_Map) +
+ A dictionary mapping property names to variant boxed values +

VpnStateChanged ( + u: state, u: reason + )

+ Emitted when the state of the VPN connection has changed. +

Parameters

state - + u + (NM_VPN_CONNECTION_STATE) +
+ The new state of the VPN connection. +
reason - + u + (NM_VPN_CONNECTION_STATE_REASON) +
+ Reason code describing the change to the new state. +

Properties:

VpnState - + u - + (read) + (NM_VPN_CONNECTION_STATE) +
The VPN-specific state of the connection.
Banner - + s - + (read)
The banner string of the VPN connection.

Enumerated types:

NM_VPN_CONNECTION_STATE

NM_VPN_CONNECTION_STATE_UNKNOWN = 0
+ The state of the VPN connection is unknown. +
NM_VPN_CONNECTION_STATE_PREPARE = 1
+ The VPN connection is preparing to connect. +
NM_VPN_CONNECTION_STATE_NEED_AUTH = 2
+ The VPN connection needs authorization credentials. +
NM_VPN_CONNECTION_STATE_CONNECT = 3
+ The VPN connection is being established. FIXME: Should be CONNECTING or CONNECTED. +
NM_VPN_CONNECTION_STATE_IP_CONFIG_GET = 4
+ The VPN connection is getting an IP address. FIXME: Should be an -ING +
NM_VPN_CONNECTION_STATE_ACTIVATED = 5
+ The VPN connection is active. +
NM_VPN_CONNECTION_STATE_FAILED = 6
+ The VPN connection failed. +
NM_VPN_CONNECTION_STATE_DISCONNECTED = 7
+ The VPN connection is disconnected. +

NM_VPN_CONNECTION_STATE_REASON

NM_VPN_CONNECTION_STATE_REASON_UNKNOWN = 0
+ The reason for the VPN connection state change is unknown. +
NM_VPN_CONNECTION_STATE_REASON_NONE = 1
+ No reason was given for the VPN connection state change. +
NM_VPN_CONNECTION_STATE_REASON_USER_DISCONNECTED = 2
+ The VPN connection changed state because the user disconnected it. +
NM_VPN_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED = 3
+ The VPN connection changed state because the device it was using was disconnected. +
NM_VPN_CONNECTION_STATE_REASON_SERVICE_STOPPED = 4
+ The service providing the VPN connection was stopped. +
NM_VPN_CONNECTION_STATE_REASON_IP_CONFIG_INVALID = 5
+ The IP config of the VPN connection was invalid. +
NM_VPN_CONNECTION_STATE_REASON_CONNECT_TIMEOUT = 6
+ The connection attempt to the VPN service timed out. +
NM_VPN_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT = 7
+ A timeout occurred while starting the service providing the VPN connection. +
NM_VPN_CONNECTION_STATE_REASON_SERVICE_START_FAILED = 8
+ Starting the service starting the service providing the VPN connection failed. +
NM_VPN_CONNECTION_STATE_REASON_NO_SECRETS = 9
+ Necessary secrets for the VPN connection were not provided. +
NM_VPN_CONNECTION_STATE_REASON_LOGIN_FAILED = 10
+ Authentication to the VPN server failed. +
NM_VPN_CONNECTION_STATE_REASON_CONNECTION_REMOVED = 11
+ The connection was deleted from settings. +
+ +

org.freedesktop.NetworkManager.VPN.Plugin

+ This interface is provided by plugins providing VPN services to the NetworkManager daemon. +

Methods:

Connect ( + a{sa{sv}}: connection + ) → + nothing

+ Tells the plugin to connect. +

Parameters

connection - + a{sa{sv}} + (String_String_Variant_Map_Map) +
+ Describes the connection to be established. +

Possible errors

org.freedesktop.NetworkManager.VPN.Error.StartingInProgress
The request could not be processed because the VPN connection is already being started.(generic description)
org.freedesktop.NetworkManager.VPN.Error.AlreadyStarted
The request could not be processed because a VPN connection was already active.(generic description)
org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress
The request could not be processed because the VPN connection is already being stopped.(generic description)
org.freedesktop.NetworkManager.VPN.Error.BadArguments
Invalid arguments were passed with the request. FIXME: too general.(generic description)
org.freedesktop.NetworkManager.VPN.Error.LaunchFailed
A binary providing the service failed to launch.(generic description)

NeedSecrets ( + a{sa{sv}}: settings + ) → + s

+ Asks the plugin whether the provided connection will require secrets to connect successfully. +

Parameters

settings - + a{sa{sv}} + (String_String_Variant_Map_Map) +
+ Describes the connection that may need secrets. +

Returns

setting_name - + s
+ The setting name within the provided connection that requires secrets, if any. +

Possible errors

org.freedesktop.NetworkManager.VPN.Error.ConnectionInvalid
The request could not be processed because the VPN connection settings were invalid.(generic description)

Disconnect ( + + ) → + nothing

+ Disconnect the plugin. +

Possible errors

org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress
The request could not be processed because the VPN connection is already being stopped.(generic description)
org.freedesktop.NetworkManager.VPN.Error.AlreadyStopped
The request could not be processed because the VPN connection was already stopped.(generic description)

SetIp4Config ( + a{sv}: config + ) → + nothing

+ Set IPv4 details on the connection. +

Parameters

config - + a{sv} + (String_Variant_Map) +
+ Ip4Config details for the conneciton. +

SetFailure ( + s: reason + ) → + nothing

+ Indicate a failure to the plugin. +

Parameters

reason - + s
+ The reason for the failure. +

Signals:

StateChanged ( + u: state + )

+ Emitted when the plugin state changes. +

Parameters

state - + u + (NM_VPN_CONNECTION_STATE) +
+ The new state of the plugin. +

Ip4Config ( + a{sv}: ip4config + )

+ The plugin obtained an IPv4 configuration. +

Parameters

ip4config - + a{sv} + (String_Variant_Map) +
+ The IPv4 configuration. +

LoginBanner ( + s: banner + )

+ Emitted when the plugin receives a login banner from the VPN service. +

Parameters

banner - + s
+ The login banner string. +

Failure ( + u: reason + )

+ Emitted when a failure in the VPN plugin occurs. +

Parameters

reason - + u + (NM_VPN_PLUGIN_FAILURE) +
+ Reason code for the failure. +

Properties:

State - + u - + (read) + (NM_VPN_CONNECTION_STATE) +
+ The state of the plugin. +

Enumerated types:

NM_VPN_PLUGIN_FAILURE

NM_VPN_PLUGIN_FAILURE_LOGIN_FAILED = 0
+ Login failed. +
NM_VPN_PLUGIN_FAILURE_CONNECT_FAILED = 1
+ Connect failed. +
NM_VPN_PLUGIN_FAILURE_BAD_IP_CONFIG = 2
+ Invalid IP configuration returned from the VPN plugin. +
+

Generic types:

Enumerated types:

NM_802_11_MODE

NM_802_11_MODE_UNKNOWN = 0
Mode is unknown.
NM_802_11_MODE_ADHOC = 1
Uncoordinated network without central infrastructure.
NM_802_11_MODE_INFRA = 2
Coordinated network with one or more central controllers.

Mapping types:

String_Variant_Map - a{ + s: Key → v: Value + } +

A mapping from strings to variants representing extra + key-value pairs.

Members

Key - + s
(undocumented)
Value - + v
(undocumented)

String_String_Map - a{ + s: Key → s: Value + } +

A mapping from strings to strings representing extra + key-value pairs.

Members

Key - + s
(undocumented)
Value - + s
(undocumented)

String_String_Variant_Map_Map - a{ + s: Key → a{sv}: Value + } +

A mapping from strings to a map of string to variant.

Members

Key - + s
(undocumented)
Value - + a{sv} + (String_Variant_Map) +
(undocumented)

Errors:

+ + +

org.freedesktop.NetworkManager.Error.UnknownConnection

+ Connection was not provided by the settings service. + + +

org.freedesktop.NetworkManager.Error.UnknownDevice

+ Unknown device. + + +

org.freedesktop.NetworkManager.Error.PermissionDenied

+ User does not have the permission to activate this connection. + + +

Errors:

+

org.freedesktop.NetworkManager.VPN.Error.General

This is a drab, nondescript error. +

org.freedesktop.NetworkManager.VPN.Error.StartingInProgress

The request could not be processed because the VPN connection is already being started. +

org.freedesktop.NetworkManager.VPN.Error.AlreadyStarted

The request could not be processed because a VPN connection was already active. +

org.freedesktop.NetworkManager.VPN.Error.StoppingInProgress

The request could not be processed because the VPN connection is already being stopped. +

org.freedesktop.NetworkManager.VPN.Error.AlreadyStopped

The request could not be processed because the VPN connection was already stopped. +

org.freedesktop.NetworkManager.VPN.Error.WrongState

The request could not be processed because the VPN connection is in the wrong state for this type of request. FIXME: too general? +

org.freedesktop.NetworkManager.VPN.Error.BadArguments

Invalid arguments were passed with the request. FIXME: too general. +

org.freedesktop.NetworkManager.VPN.Error.LaunchFailed

A binary providing the service failed to launch. +

org.freedesktop.NetworkManager.VPN.Error.ConnectionInvalid

The request could not be processed because the VPN connection settings were invalid. +

Index

Index of interfaces

Index of types

-- cgit 1.3.0-6-gf8a5