From e152ec7bf4ba252ff9d3eb13eabd417b931dac9a Mon Sep 17 00:00:00 2001 From: Iain Lane Date: Mon, 24 Sep 2018 09:29:55 +0100 Subject: Import Upstream version 1.12.2 --- docs/api/html/settings-802-3-ethernet.html | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/api/html/settings-802-3-ethernet.html') diff --git a/docs/api/html/settings-802-3-ethernet.html b/docs/api/html/settings-802-3-ethernet.html index 65f22f24..75382df3 100644 --- a/docs/api/html/settings-802-3-ethernet.html +++ b/docs/api/html/settings-802-3-ethernet.html @@ -8,7 +8,7 @@ - + @@ -63,7 +63,7 @@

auto-negotiate

boolean

FALSE

-If TRUE, enforce auto-negotiation of port speed and duplex mode. If FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped. +When TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped.

cloned-mac-address

@@ -75,7 +75,7 @@

duplex

string

-Can be specified only when "auto-negotiate" is "off". In that case, statically configures the device to use that specified duplex mode, either "half" or "full". Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it. +When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it.

generate-mac-address-mask

@@ -135,7 +135,7 @@

speed

uint32

-Can be set to a value greater than zero only when "auto-negotiate" is "off". In that case, statically configures the device to use that specified speed. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it. +When a value grater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it.

wake-on-lan

@@ -156,6 +156,6 @@ +

Generated by GTK-Doc V1.28 \ No newline at end of file -- cgit 1.3.0-6-gf8a5