From a4256940da049f91bbbea5e53e469a59ea9c10f7 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Fri, 25 Oct 2013 21:20:58 +0200 Subject: Imported Upstream version 0.9.8.8 --- docs/api/html/ref-settings.html | 84 +++++++++++++++++++++++------------------ 1 file changed, 48 insertions(+), 36 deletions(-) (limited to 'docs/api/html/ref-settings.html') diff --git a/docs/api/html/ref-settings.html b/docs/api/html/ref-settings.html index a70f8150..28b89a23 100644 --- a/docs/api/html/ref-settings.html +++ b/docs/api/html/ref-settings.html @@ -3,12 +3,12 @@ Network Configuration Setting Specification - + - + @@ -20,10 +20,10 @@ Next
-

-Network Configuration Setting Specification

-
-
Configuration Settings
+

+Network Configuration Setting Specification

+
+
Configuration Settings
Secret flag types

@@ -35,11 +35,11 @@

-Configuration Settings

+Configuration Settings

-

Table 1. 802-1x setting

+

Table 1. 802-1x setting

@@ -178,7 +178,7 @@ - + @@ -190,7 +190,7 @@ - + @@ -235,6 +235,18 @@ + + + + + + + + + + + + @@ -246,7 +258,7 @@


-

Table 2. adsl setting

+

Table 2. adsl setting

password
 
string
 
Password used for EAP authentication methods.UTF-8 encoded password used for EAP authentication methods.
 

 

 
password-flags
password-raw

 
byte array

 
[]
Password used for EAP authentication methods as a byte arrayPassword used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used.  If both 'password' and 'password-raw' are given, 'password' is preferred.
 

 

 
password-raw-flags
Flags indicating how to handle the 802.1x phase2 private key password. (see the section called “Secret flag types” for flag values)
 

 
pin
string
PIN used for EAP authentication methods.
pin-flags
uint32
0
Flags indicating how to handle the 802.1x PIN. (see the section called “Secret flag types” for flag values)

 
system-ca-certs

 
boolean

 
FALSE

 
@@ -315,7 +327,7 @@
 


 

-
Table 3. bluetooth setting

+
Table 3. bluetooth setting

 

 
 

 
@@ -354,7 +366,7 @@
 


 

-
Table 4. bond setting

+
Table 4. bond setting

 

 
 

 
@@ -393,7 +405,7 @@
 


 

-
Table 5. bridge setting

+
Table 5. bridge setting

 

 
 

 
@@ -462,7 +474,7 @@
 


 

-
Table 6. bridge-port setting

+
Table 6. bridge-port setting

 

 
 

 
@@ -507,7 +519,7 @@
 


 

-
Table 7. cdma setting

+
Table 7. cdma setting

 

 
 

 
@@ -558,7 +570,7 @@
 


 

-
Table 8. connection setting

+
Table 8. connection setting

 

 
 

 
@@ -651,7 +663,7 @@
 


 

-
Table 9. gsm setting

+
Table 9. gsm setting

 

 
 

 
@@ -744,7 +756,7 @@
 


 

-
Table 10. infiniband setting

+
Table 10. infiniband setting

 

 
 

 
@@ -789,7 +801,7 @@
 


 

-
Table 11. ipv4 setting

+
Table 11. ipv4 setting

 

 
 

 
@@ -888,7 +900,7 @@
 


 

-
Table 12. ipv6 setting

+
Table 12. ipv6 setting

 

 
 

 
@@ -913,7 +925,7 @@
 
-
+
@@ -981,7 +993,7 @@
 


 

-
Table 13. 802-11-olpc-mesh setting

+
Table 13. 802-11-olpc-mesh setting

 

 
 

method

 
string

 
IPv6 configuration method.  If 'auto' is specified then the appropriate automatic method (PPP, router advertisement, etc) is used for the device and most other properties can be left unset.  To force the use of DHCP only, specify 'dhcp'; this method is only valid for ethernet-based hardware.  If 'link-local' is specified, then an IPv6 link-local address will be assigned to the interface.  If 'manual' is specified, static IP addressing is used and at least one IP address must be given in  the 'addresses' property.  If 'ignored' is specified, IPv6 configuration is not done. This property must be set.  NOTE: the 'shared' methodis not yet supported.IPv6 configuration method.  If 'auto' is specified then the appropriate automatic method (PPP, router advertisement, etc) is used for the device and most other properties can be left unset.  To force the use of DHCP only, specify 'dhcp'; this method is only valid for ethernet-based hardware.  If 'link-local' is specified, then an IPv6 link-local address will be assigned to the interface.  If 'manual' is specified, static IP addressing is used and at least one IP address must be given in  the 'addresses' property.  If 'ignore' is specified, IPv6 configuration is not done. This property must be set.  NOTE: the 'shared' methodis not yet supported.
 

 

 
dhcp-hostname

 
@@ -1026,7 +1038,7 @@
 


 

-
Table 14. ppp setting

+
Table 14. ppp setting

 

 
 

 
@@ -1161,7 +1173,7 @@
 


 

-
Table 15. pppoe setting

+
Table 15. pppoe setting

 

 
 

 
@@ -1212,7 +1224,7 @@
 


 

-
Table 16. serial setting

+
Table 16. serial setting

 

 
 

 
@@ -1269,7 +1281,7 @@
 


 

-
Table 17. vlan setting

+
Table 17. vlan setting

 

 
 

 
@@ -1332,7 +1344,7 @@
 


 

-
Table 18. vpn setting

+
Table 18. vpn setting

 

 
 

 
@@ -1383,7 +1395,7 @@
 


 

-
Table 19. wimax setting

+
Table 19. wimax setting

 

 
 

 
@@ -1422,7 +1434,7 @@
 


 

-
Table 20. 802-3-ethernet setting

+
Table 20. 802-3-ethernet setting

 

 
 

 
@@ -1515,7 +1527,7 @@
 


 

-
Table 21. 802-11-wireless setting

+
Table 21. 802-11-wireless setting

 

 
 

 
@@ -1594,7 +1606,7 @@
 
-
+
@@ -1626,7 +1638,7 @@
 


 

-
Table 22. 802-11-wireless-security setting

+
Table 22. 802-11-wireless-security setting

 

 
 

mac-address-blacklist

 
array of string

 
[]
If specified, this connection will never apply to the WiFi device whose permanent MAC address matches an address in the list.  Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55).A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply.  Each MAC address should be given in the standard hex-digits-and-colons notation (eg '00:11:22:33:44:55').
 

 

 
mtu

 
@@ -1675,13 +1687,13 @@
 
-
+
-
+
@@ -1758,6 +1770,6 @@
 

 

-          Generated by GTK-Doc V1.18

+          Generated by GTK-Doc V1.19
\ No newline at end of file
-- 
cgit 1.3.0-6-gf8a5



 
 

pairwise

 
array of string

 
[]
If specified, will only connect to WPA networks that provide the specified pairwise encryption capabilities.  Each element may be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty.  Each list element may be one of 'wep40', 'wep104', 'tkip' or 'ccmp'.
 

 

 
group

 
array of string

 
[]
If specified, will only connect to WPA networks that provide the specified group/multicast encryption capabilities.  Each element may be one of 'wep40', 'wep104', 'tkip', or 'ccmp'.A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list.  For maximum compatibility leave this property empty.  Each list element may be one  of 'wep40', 'wep104', 'tkip', or 'ccmp'.
 

 

 
leap-username