From 964ae8cc391520440cf5aa13e2b9cc34850ea6c2 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Tue, 26 Feb 2019 19:01:41 +0100 Subject: New upstream version 1.14.6 --- docs/api/html/nm-settings.html | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'docs/api/html/nm-settings.html') diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html index 2f317601..9293e903 100644 --- a/docs/api/html/nm-settings.html +++ b/docs/api/html/nm-settings.html @@ -8,7 +8,7 @@ - + @@ -241,7 +241,7 @@ stable-id string   -This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. +This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. @@ -1356,7 +1356,7 @@ dhcp-client-id string   -A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If unset, a globally configured default is used. If still unset, the client-id from the last lease is reused. +A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values "mac" and "perm-mac" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value "duid" generates a RFC4361-compliant client identifier based on a hash of the interface name as IAID and /etc/machine-id. The special value "stable" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the "${DEVICE}" or "${MAC}" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin. @@ -1538,7 +1538,7 @@ dhcp-duid string   -A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed. +A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the "${DEVICE}" or "${MAC}" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed. @@ -2491,14 +2491,14 @@ total-vfs uint32 0 -The total number of virtual functions to create. +The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface also when it is zero. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection. vfs array of vardict [] -Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". The "vlans" attribute is represented as a semicolor-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad. +Array of virtual function descriptors. Each VF descriptor is a dictionary mapping attribute names to GVariant values. The 'index' entry is mandatory for each VF. When represented as string a VF is in the form: "INDEX [ATTR=VALUE[ ATTR=VALUE]...]". for example: "2 mac=00:11:22:33:44:55 spoof-check=true". Multiple VFs can be specified using a comma as separator. Currently the following attributes are supported: mac, spoof-check, trust, min-tx-rate, max-tx-rate, vlans. The "vlans" attribute is represented as a semicolon-separated list of VLAN descriptors, where each descriptor has the form "ID[.PRIORITY[.PROTO]]". PROTO can be either 'q' for 802.1Q (the default) or 'ad' for 802.1ad. @@ -3652,6 +3652,6 @@
-
Generated by GTK-Doc V1.29.1
+
Generated by GTK-Doc V1.29 \ No newline at end of file -- cgit 1.3.0-6-gf8a5 From 9a6dcbf895f9da01768e64b73cec88c16157d91e Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Tue, 26 Mar 2019 23:25:23 +0100 Subject: New upstream version 1.16.0 --- docs/api/html/nm-settings.html | 156 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 141 insertions(+), 15 deletions(-) (limited to 'docs/api/html/nm-settings.html') diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html index 9293e903..57ffab77 100644 --- a/docs/api/html/nm-settings.html +++ b/docs/api/html/nm-settings.html @@ -241,7 +241,7 @@ stable-id string   -This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. +This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. @@ -1202,7 +1202,7 @@ number string   -Number to dial when establishing a PPP data session with the GSM-based mobile broadband network. Many modems do not require PPP for connections to the mobile network and thus this property should be left blank, which allows NetworkManager to select the appropriate settings automatically. +Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1 @@ -1405,7 +1405,7 @@ dns-priority int32 0 -DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored. +DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored. @@ -1580,7 +1580,7 @@ dns-priority int32 0 -DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects the default value, which is 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored. +DNS servers priority. The relative priority for DNS servers specified by this setting. A lower value is better (higher priority). Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. When multiple devices have configurations with the same priority, the one with an active default route will be preferred. Negative values have the special effect of excluding other configurations with a greater priority value; so in presence of at least a negative priority, only DNS servers from connections with the lowest priority value will be used. When using a DNS resolver that supports split-DNS as dns=dnsmasq or dns=systemd-resolved, each connection is used to query domains in its search list. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the highest priority (lowest numerical value) wins. If a connection specifies a domain which is subdomain of another domain with a negative DNS priority value, the subdomain is ignored. @@ -2575,7 +2575,7 @@ link-watchers array of vardict [] -Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details. +Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details. @@ -2722,7 +2722,7 @@ link-watchers array of vardict [] -Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-incative', 'send-always'. See teamd.conf man for more details. +Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details. @@ -3098,7 +3098,49 @@
-

wimax setting

+

wifi-p2p setting

+

Wi-Fi P2P Settings.

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+peerstring The P2P device that should be connected to. Currently this is the only way to create or join a group.
+wfd-iesbyte array The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.
+wps-methoduint320Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.
+
+
+
+

wimax setting

WiMax Settings.

@@ -3133,7 +3175,7 @@
-

802-3-ethernet setting

+

802-3-ethernet setting

Wired Ethernet Settings.

@@ -3154,7 +3196,7 @@ assigned-mac-address - +
string  The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explict hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
@@ -3259,7 +3301,77 @@
-

802-11-wireless setting

+

wireguard setting

+

WireGuard Ethernet Settings.

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+fwmarkuint320The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.
+listen-portuint320The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.
+peer-routesbooleanTRUEWhether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively.
+peersarray of 'a{sv}' Array of dictionaries for the WireGuard peers.
+private-keystring The 256 bit private-key in base64 encoding.
+private-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key" property. (see the section called “Secret flag types:” for flag values)
+
+
+
+

802-11-wireless setting

Wi-Fi Settings.

@@ -3280,7 +3392,7 @@ assigned-mac-address - +
string  The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explict hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".The new field for the cloned MAC address. It can be either a hardware address in ASCII representation, or one of the special values "preserve", "permanent", "random" or "stable". This field replaces the deprecated "cloned-mac-address" on D-Bus, which can only contain explicit hardware addresses. Note that this property only exists in D-Bus API. libnm and nmcli continue to call this property "cloned-mac-address".
@@ -3413,7 +3525,7 @@
-

802-11-wireless-security setting

+

802-11-wireless-security setting

Wi-Fi Security Settings.

@@ -3455,7 +3567,7 @@ key-mgmt - + - + + + + + + +
string  Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.
@@ -3504,7 +3616,7 @@ psk string  Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network.Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
@@ -3574,7 +3686,7 @@
-

wpan setting

+

wpan setting

IEEE 802.15.4 (WPAN) MAC Settings.

@@ -3592,6 +3704,13 @@ + + + + + + @@ -3599,6 +3718,13 @@ + + + + + + -- cgit 1.3.0-6-gf8a5 From 85563b7fc7ec2cd21e38debb9b28db342e2e8e7c Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Sun, 21 Apr 2019 21:09:51 +0200 Subject: New upstream version 1.18.0 --- docs/api/html/nm-settings.html | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'docs/api/html/nm-settings.html') diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html index 57ffab77..6ee39655 100644 --- a/docs/api/html/nm-settings.html +++ b/docs/api/html/nm-settings.html @@ -857,6 +857,27 @@ + + + + + + + + + + + + + + + + + +
+channelint32-1IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
mac-address string  
+pageint32-1IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to".
pan-id uint32 65535TRUE Controls whether Spanning Tree Protocol (STP) is enabled for this bridge.
+vlan-default-pviduint321The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames.
+vlan-filteringbooleanFALSEControl whether VLAN filtering is enabled on the bridge.
+vlansarray of vardict[]Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
@@ -899,6 +920,13 @@ 		32 The Spanning Tree Protocol (STP) priority of this bridge port.
+vlansarray of vardict[]Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.
-- cgit 1.3.0-6-gf8a5