From dd428301eb6f02542015121d7b08d9997f137e50 Mon Sep 17 00:00:00 2001 From: Sebastien Bacher Date: Tue, 12 Mar 2019 15:13:33 +0100 Subject: New upstream version 1.15.91 --- docs/api/html/nm-settings.html | 128 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 120 insertions(+), 8 deletions(-) (limited to 'docs/api/html/nm-settings.html') diff --git a/docs/api/html/nm-settings.html b/docs/api/html/nm-settings.html index 4b7a4346..57ffab77 100644 --- a/docs/api/html/nm-settings.html +++ b/docs/api/html/nm-settings.html @@ -241,7 +241,7 @@ stable-id string   -This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds the the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. +This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection. @@ -3098,7 +3098,49 @@
-

wimax setting

+

wifi-p2p setting

+

Wi-Fi P2P Settings.

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+peerstring The P2P device that should be connected to. Currently this is the only way to create or join a group.
+wfd-iesbyte array The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.
+wps-methoduint320Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.
+
+
+
+

wimax setting

WiMax Settings.

@@ -3133,7 +3175,7 @@
-

802-3-ethernet setting

+

802-3-ethernet setting

Wired Ethernet Settings.

@@ -3259,7 +3301,77 @@
-

802-11-wireless setting

+

wireguard setting

+

WireGuard Ethernet Settings.

+
++++++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Key NameValue TypeDefault ValueValue Description
+fwmarkuint320The use of fwmark is optional and is by default off. Setting it to 0 disables it. Otherwise it is a 32-bit fwmark for outgoing packets.
+listen-portuint320The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up.
+mtuuint320If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation.
+peer-routesbooleanTRUEWhether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively.
+peersarray of 'a{sv}' Array of dictionaries for the WireGuard peers.
+private-keystring The 256 bit private-key in base64 encoding.
+private-key-flagsNMSettingSecretFlags (uint32) Flags indicating how to handle the "private-key" property. (see the section called “Secret flag types:” for flag values)
+
+
+
+

802-11-wireless setting

Wi-Fi Settings.

@@ -3413,7 +3525,7 @@
-

802-11-wireless-security setting

+

802-11-wireless-security setting

Wi-Fi Security Settings.

@@ -3455,7 +3567,7 @@ key-mgmt - + - +
string  Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), "sae" (SAE) or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security.
@@ -3504,7 +3616,7 @@ psk string  Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network.Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication.
@@ -3574,7 +3686,7 @@
-

wpan setting

+

wpan setting

IEEE 802.15.4 (WPAN) MAC Settings.

-- cgit 1.3.0-6-gf8a5