From b22a7b55d0bc5a7999dccaeacdde745f5ace9d66 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Thu, 23 Feb 2023 17:11:22 +0100 Subject: New upstream version 1.42.2 --- docs/api/html/nm-settings-nmcli.html | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) (limited to 'docs/api/html/nm-settings-nmcli.html') diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html index 2c7ef708..1a4f4495 100644 --- a/docs/api/html/nm-settings-nmcli.html +++ b/docs/api/html/nm-settings-nmcli.html @@ -2086,7 +2086,10 @@

dhcp-iaid

-

A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.

+

A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The string can be a 32-bit number (either decimal, hexadecimal or or as colon separated hexadecimal numbers). Alternatively it can be set to the special values "mac", "perm-mac", "ifname" or "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname".

+

For DHCPv4, the IAID is only used with "ipv4.dhcp-client-id" values "duid" and "ipv6-duid" to generate the client-id.

+

For DHCPv6, note that at the moment this property is only supported by the "internal" DHCPv6 plugin. The "dhclient" DHCPv6 plugin always derives the IAID from the MAC address.

+

The actually used DHCPv6 IAID for a currently activated interface is exposed in the lease information of the device.

Format: string

@@ -2238,6 +2241,14 @@ +

replace-local-rule

+ +

Connections will default to keep the autogenerated priority 0 local rule unless this setting is set to TRUE.

+

+ Format: NMTernary (int32)

+ + +

required-timeout

The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds.

@@ -2426,7 +2437,10 @@ Example: priority 5 from 192.167.4.0/24 table 45

dhcp-iaid

-

A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The property is a 32-bit decimal value or a special value among "mac", "perm-mac", "ifname" and "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname". Note that at the moment this property is ignored for IPv6 by dhclient, which always derives the IAID from the MAC address.

+

A string containing the "Identity Association Identifier" (IAID) used by the DHCP client. The string can be a 32-bit number (either decimal, hexadecimal or or as colon separated hexadecimal numbers). Alternatively it can be set to the special values "mac", "perm-mac", "ifname" or "stable". When set to "mac" (or "perm-mac"), the last 4 bytes of the current (or permanent) MAC address are used as IAID. When set to "ifname", the IAID is computed by hashing the interface name. The special value "stable" can be used to generate an IAID based on the stable-id (see connection.stable-id), a per-host key and the interface name. When the property is unset, the value from global configuration is used; if no global default is set then the IAID is assumed to be "ifname".

+

For DHCPv4, the IAID is only used with "ipv4.dhcp-client-id" values "duid" and "ipv6-duid" to generate the client-id.

+

For DHCPv6, note that at the moment this property is only supported by the "internal" DHCPv6 plugin. The "dhclient" DHCPv6 plugin always derives the IAID from the MAC address.

+

The actually used DHCPv6 IAID for a currently activated interface is exposed in the lease information of the device.

Format: string

@@ -2579,6 +2593,14 @@ Example: priority 5 from 192.167.4.0/24 table 45 +

replace-local-rule

+ +

Connections will default to keep the autogenerated priority 0 local rule unless this setting is set to TRUE.

+

+ Format: NMTernary (int32)

+ + +

required-timeout

The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds.

-- cgit 1.3.0-6-gf8a5