From 88625ab09bf9c6d8f0d5042fcde398a5abfd1da6 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Fri, 17 May 2024 11:38:51 +0200 Subject: New upstream version 1.47.91 --- docs/api/html/nm-settings-nmcli.html | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'docs/api/html/nm-settings-nmcli.html') diff --git a/docs/api/html/nm-settings-nmcli.html b/docs/api/html/nm-settings-nmcli.html index d91c80e3..435a4a69 100644 --- a/docs/api/html/nm-settings-nmcli.html +++ b/docs/api/html/nm-settings-nmcli.html @@ -8,7 +8,7 @@ - + @@ -3415,12 +3415,12 @@ Example: priority 5 from 192.167.4.0/24 table 45

ipv6.ip6-privacy

Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941. If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64. This enhances privacy, but could cause problems in some applications, on the other hand. The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses).

If set to "-1" (unknown) for a connection, the value is taken from the global "ipv6.ip6-privacy" setting. If the global setting is unspecified or also set to "-1", the value is set from the original value of "/proc/sys/net/ipv6/conf/<iface>/use_tempaddr" from before NetworkManager started.

Having a per-connection setting set to "-1" (default) means fallback to global configuration "ipv6.ip6-privacy". If it's also unspecified or set to "-1", fallback to read "/proc/sys/net/ipv6/conf/default/use_tempaddr".

Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the "addr-gen-mode" property's "stable-privacy" setting as another way of avoiding host tracking with IPv6 addresses.

Format: choice (NMSettingIP6ConfigPrivacy)

- Valid values: unknown (-1), disabled (0), prefer-public-addr (1), prefer-temp-addr (2)

+ Valid values: unknown/default (-1), disabled (0), prefer-public-addr (1), prefer-temp-addr (2)

@@ -3610,22 +3610,26 @@ Example: priority 5 from 1:2:3::5/128 table 45

ipv6.temp-preferred-lifetime

The preferred lifetime of autogenerated temporary addresses, in seconds.

If set to "0" (unknown) for a connection, the value is taken from the global "ipv6.temp-preferred-lifetime" setting. If the global setting is unspecified or also set to "0", the value is set from the original value of "/proc/sys/net/ipv6/conf/<iface>/temp_prefered_lft" from before NetworkManager started.

Having a per-connection setting set to "0" (default) means fallback to global configuration "ipv6.temp-preferred-lifetime" setting". If it's also unspecified or set to "0", fallback to read "/proc/sys/net/ipv6/conf/default/temp_prefered_lft".

Format: integer

Valid values: 0 - 2147483647

+ Special values: default (0)

ipv6.temp-valid-lifetime

The valid lifetime of autogenerated temporary addresses, in seconds.

If set to "0" (unknown) for a connection, the value is taken from the global "ipv6.temp-valid-lifetime" setting. If the global setting is unspecified or also set to "0", the value is set from the original value of "/proc/sys/net/ipv6/conf/<iface>/temp_valid_lft" from before NetworkManager started.

Having a per-connection setting set to "0" (default) means fallback to global configuration "ipv6.temp-valid-lifetime" setting". If it's also unspecified or set to "0", fallback to read "/proc/sys/net/ipv6/conf/default/temp_valid_lft".

Format: integer

Valid values: 0 - 2147483647

+ Special values: default (0)

@@ -7101,6 +7105,6 @@ Linux traffic control subsystem +

Generated by GTK-Doc V1.34.0 \ No newline at end of file -- cgit 1.3.0-6-gf8a5