From bfe522304da217296e2a61040f58e35ec5d6f3f2 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Mon, 16 Aug 2021 09:51:46 +0200 Subject: New upstream version 1.30.6 --- docs/api/html/nm-settings-ifcfg-rh.html | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'docs/api/html/nm-settings-ifcfg-rh.html') diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 8b57a583..73ef3c45 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -8,7 +8,7 @@ - + @@ -1999,17 +1999,19 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1 qdiscs -QDISC1(+), QDISC2(+), ... +QDISC1(+), QDISC2(+), ..., TC_COMMIT(+) +   -Queueing disciplines +Queueing disciplines to set on the interface. When no QDISC1, QDISC2, ..., FILTER1, FILTER2, ... keys are present, NetworkManager doesn't touch qdiscs and filters present on the interface, unless TC_COMMIT is set to 'yes'. Example: QDISC1=ingress, QDISC2="root handle 1234: fq_codel" qdiscs -FILTER1(+), FILTER2(+), ... +FILTER1(+), FILTER2(+), ..., TC_COMMIT(+) +   -Traffic filters +Traffic filters to set on the interface. When no QDISC1, QDISC2, ..., FILTER1, FILTER2, ... keys are present, NetworkManager doesn't touch qdiscs and filters present on the interface, unless TC_COMMIT is set to 'yes'. Example: FILTER1="parent ffff: matchall action simple sdata Input", ... @@ -2722,6 +2724,6 @@ Allowed values: "yes", "no"
-
Generated by GTK-Doc V1.33.1
+
Generated by GTK-Doc V1.33.0 \ No newline at end of file -- cgit 1.3.0-6-gf8a5 From e74c568b07b50b97873fb4ee1d776dedefbd54d6 Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Fri, 1 Oct 2021 23:05:04 +0200 Subject: New upstream version 1.32.12 --- docs/api/html/nm-settings-ifcfg-rh.html | 117 ++++++++++++++++++++------------ 1 file changed, 74 insertions(+), 43 deletions(-) (limited to 'docs/api/html/nm-settings-ifcfg-rh.html') diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 73ef3c45..0315a5eb 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -209,10 +209,10 @@ DEVICETYPE=TeamPort

-

Semantic change of variables

+

Semantic change of variables and differences

- NetworkManager had to slightly change the semantic for a few variables. + NetworkManager changes the semantics for a few variables and there are other behavioral differences.

  • PEERDNS - @@ -234,6 +234,11 @@ DEVICETYPE=TeamPort

  • HWADDR - initscripts compare the currently set hardware address of a device, while NetworkManager considers the permanent one.

    • +

  • NOZEROCONF - + initscripts add an on-link route to 169.254.0.0/16 for ethernet profiles that don't + explicitly opt-out by setting NOZEROCONF variable. NetworkManager does + not do that. Instead a static, manual route with scope=253 (link) should be added to get + that behavior.

@@ -251,7 +256,7 @@ DEVICETYPE=TeamPort are NetworkManager specific extensions not understood by traditional initscripts.

-

Table 11. 6lowpan setting

+

Table 11. 6lowpan setting

@@ -269,7 +274,7 @@ DEVICETYPE=TeamPort

-

Table 12. 802-1x setting

+

Table 12. 802-1x setting

@@ -597,7 +602,7 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12

-

Table 13. bond setting

+

Table 13. bond setting

@@ -622,7 +627,7 @@ Example: BONDING_OPTS="miimon=100 mode=broadcast"

-

Table 14. bridge-port setting

+

Table 14. bridge-port setting

@@ -671,7 +676,7 @@ Example: BRIDGE_PORT_VLANS="1 pvid untagged,20,300-400 untagged"

-

Table 15. bridge setting

+

Table 15. bridge setting

@@ -910,7 +915,7 @@ Example: BRIDGING_OPTS="multicast_startup_query_interval=4000"
-

Table 16. connection setting

+

Table 16. connection setting

@@ -1128,7 +1133,7 @@ Allowed values: a valid URL that points to recommended policy fo

-

Table 17. dcb setting

+

Table 17. dcb setting

@@ -1263,7 +1268,7 @@ Example: DCB_PG_UP2TC=01623701 used explicitly to enable DCB so that the rest of the DCB_* variables can apply.

-

Table 18. ethtool setting

+

Table 18. ethtool setting

@@ -1281,7 +1286,7 @@ Example: DCB_PG_UP2TC=01623701

-

Table 19. hostname setting

+

Table 19. hostname setting

@@ -1336,7 +1341,7 @@ Example: HOSTNAME_ONLY_FROM_DEFAULT=0,1

-

Table 20. infiniband setting

+

Table 20. infiniband setting

@@ -1391,7 +1396,7 @@ Example: PHYSDEV=ib0

-

Table 21. ipv4 setting

+

Table 21. ipv4 setting

@@ -1568,7 +1573,7 @@ Example: DHCP_VENDOR_CLASS_IDENTIFIER=foo

-

Table 22. ipv6 setting

+

Table 22. ipv6 setting

@@ -1654,12 +1659,18 @@ Example: IPV6_DEFAULTGW=abbe::1 Example: IPV6_DHCP_TIMEOUT=10 + + + + + + - + @@ -1751,7 +1762,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU
dhcp-hostname-flagsDHCPV6_HOSTNAME_FLAGS flags for the DHCP hostname property + +Example: DHCPV6_HOSTNAME_FLAGS=5
never-default IPV6_DEFROUTE(+), (and IPV6_DEFAULTGW, IPV6_DEFAULTDEV in /etc/sysconfig/network) IPV6_DEFROUTE=yes (when no variable specified)IPV6_DEFROUTE=no tells NetworkManager that this connection should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite meaning as 'never-default' property. - -Example: DHCPV6_HOSTNAME_FLAGS=5 */ IPV6_DEFROUTE=no tells NetworkManager that this connection should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite meaning as 'never-default' property.
may-fail

-

Table 23. match setting

+

Table 23. match setting

@@ -1776,7 +1787,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 24. ovs-bridge setting

+

Table 24. ovs-bridge setting

@@ -1794,7 +1805,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 25. ovs-dpdk setting

+

Table 25. ovs-dpdk setting

@@ -1812,7 +1823,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 26. ovs-external-ids setting

+

Table 26. ovs-external-ids setting

@@ -1830,7 +1841,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 27. ovs-interface setting

+

Table 27. ovs-interface setting

@@ -1848,7 +1859,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 28. ovs-patch setting

+

Table 28. ovs-patch setting

@@ -1866,7 +1877,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 29. ovs-port setting

+

Table 29. ovs-port setting

@@ -1884,7 +1895,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 30. proxy setting

+

Table 30. proxy setting

@@ -1937,7 +1948,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac

-

Table 31. sriov setting

+

Table 31. sriov setting

@@ -1982,7 +1993,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1

-

Table 32. tc setting

+

Table 32. tc setting

@@ -2019,7 +2030,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 33. team-port setting

+

Table 33. team-port setting

@@ -2042,7 +2053,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 34. team setting

+

Table 34. team setting

@@ -2065,7 +2076,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 35. user setting

+

Table 35. user setting

@@ -2090,7 +2101,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 36. veth setting

+

Table 36. veth setting

@@ -2108,7 +2119,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 37. vlan setting

+

Table 37. vlan setting

@@ -2131,9 +2142,9 @@ Example: NM_USER_FOO__BAR=something - + - + @@ -2171,7 +2182,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12
idVLAN_ID or DEVICEVLAN_ID, DEVICE.  VLAN identifier.VLAN identifier. If VLAN_ID is not set, it is attempted to be detected from the suffix of DEVICE=. Note that older versions of NetworkManager had a bug where they would prefer the detected ID from the DEVICE over VLAN_ID.
flags

-

Table 38. vrf setting

+

Table 38. vrf setting

@@ -2189,7 +2200,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 39. wifi-p2p setting

+

Table 39. wifi-p2p setting

@@ -2207,7 +2218,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 40. 802-3-ethernet setting

+

Table 40. 802-3-ethernet setting

@@ -2304,11 +2315,31 @@ Allowed values: "qeth", "lcs" or "ctc" + + + + + + + + + + + + + + + + + +
  S390 device options. All options go to OPTIONS, except for "portname" and "ctcprot" that have their own variables.
wake-on-lanETHTOOL_OPTS, ETHTOOL_WAKE_ON_LAN Wake on Lan mode for ethernet. The setting "ignore" is expressed with "ETHTOOL_WAKE_ON_LAN=ignore". Otherwise, the "ETHTOOL_OPTS" variable is set with the value "wol" and several of the characters "p|u|m|b|a|g|s|f|d" as explained in the ethtool manual page.
wake-on-lan-passwordETHTOOL_OPTS Password for secure-on based Wake-on-Lan. It is added as "sopass" parameter in the ETHTOOL_OPTS variable. + +Example: ETHTOOL_OPTS="wol gs sopass 00:11:22:33:44:55"
accept-all-mac-addressesACCEPT_ALL_MAC_ADDRESSES Enforce the interface to accept all the packets.

-

Table 41. wireguard setting

+

Table 41. wireguard setting

@@ -2326,7 +2357,7 @@ Allowed values: "qeth", "lcs" or "ctc"

-

Table 42. 802-11-wireless-security setting

+

Table 42. 802-11-wireless-security setting

@@ -2346,9 +2377,9 @@ Allowed values: "qeth", "lcs" or "ctc" - +Allowed values: none, ieee8021x, owe, wpa-psk, sae, wpa-eap, wpa-eap-suite-b-192 @@ -2508,7 +2539,7 @@ Allowed values: default, disable, optional, required
KEY_MGMT(+)  Key management menthod. +Key management method. -Allowed values: IEEE8021X, WPA-PSK, WPA-EAP, WPA-EAP-SUITE-B-192
wep-tx-keyidx

-

Table 43. 802-11-wireless setting

+

Table 43. 802-11-wireless setting

@@ -2665,7 +2696,7 @@ Allowed values: "yes", "no"

-

Table 44. wpan setting

+

Table 44. wpan setting

-- cgit 1.3.0-6-gf8a5 From 88c227d90a6b7b388c5c85d72802a0ca8f05ed5c Mon Sep 17 00:00:00 2001 From: Michael Biebl Date: Thu, 13 Jan 2022 22:30:39 +0100 Subject: New upstream version 1.34.0 --- docs/api/html/nm-settings-ifcfg-rh.html | 98 ++++++++++++++++++++++----------- 1 file changed, 66 insertions(+), 32 deletions(-) (limited to 'docs/api/html/nm-settings-ifcfg-rh.html') diff --git a/docs/api/html/nm-settings-ifcfg-rh.html b/docs/api/html/nm-settings-ifcfg-rh.html index 0315a5eb..b4400d0d 100644 --- a/docs/api/html/nm-settings-ifcfg-rh.html +++ b/docs/api/html/nm-settings-ifcfg-rh.html @@ -602,7 +602,32 @@ Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12

-

Table 13. bond setting

+

Table 13. bond-port setting

+
++++++ + + + + + + + + + + + + +
PropertyIfcfg-rh VariableDefaultDescription
queue-idBONDING_OPTS: queue-id=0Queue ID. + +Allowed values: 0 - 65535
+
+
+

Table 14. bond setting

@@ -627,7 +652,7 @@ Example: BONDING_OPTS="miimon=100 mode=broadcast"

-

Table 14. bridge-port setting

+

Table 15. bridge-port setting

@@ -676,7 +701,7 @@ Example: BRIDGE_PORT_VLANS="1 pvid untagged,20,300-400 untagged"

-

Table 15. bridge setting

+

Table 16. bridge setting

@@ -915,7 +940,7 @@ Example: BRIDGING_OPTS="multicast_startup_query_interval=4000"
-

Table 16. connection setting

+

Table 17. connection setting

@@ -1109,6 +1134,15 @@ Example: LLMNR=yes Allowed values: yes,no,resolve + + + + + + @@ -1133,7 +1167,7 @@ Allowed values: a valid URL that points to recommended policy fo
dns-over-tlsDNS_OVER_TLS(+) +missing variable means global defaultWhether or not DNSOverTls is enabled for the connection + +Allowed values: yes,no,opportunistic
wait-device-timeout DEVTIMEOUT(+)

-

Table 17. dcb setting

+

Table 18. dcb setting

@@ -1268,7 +1302,7 @@ Example: DCB_PG_UP2TC=01623701 used explicitly to enable DCB so that the rest of the DCB_* variables can apply.

-

Table 18. ethtool setting

+

Table 19. ethtool setting

@@ -1286,7 +1320,7 @@ Example: DCB_PG_UP2TC=01623701

-

Table 19. hostname setting

+

Table 20. hostname setting

@@ -1341,7 +1375,7 @@ Example: HOSTNAME_ONLY_FROM_DEFAULT=0,1

-

Table 20. infiniband setting

+

Table 21. infiniband setting

@@ -1396,7 +1430,7 @@ Example: PHYSDEV=ib0

-

Table 21. ipv4 setting

+

Table 22. ipv4 setting

@@ -1573,7 +1607,7 @@ Example: DHCP_VENDOR_CLASS_IDENTIFIER=foo

-

Table 22. ipv6 setting

+

Table 23. ipv6 setting

@@ -1762,7 +1796,7 @@ Example: DHCPV6_DUID=LL; DHCPV6_DUID=0301deadbeef0001; DHCPV6_DU

-

Table 23. match setting

+

Table 24. match setting

@@ -1787,7 +1821,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 24. ovs-bridge setting

+

Table 25. ovs-bridge setting

@@ -1805,7 +1839,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 25. ovs-dpdk setting

+

Table 26. ovs-dpdk setting

@@ -1823,7 +1857,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 26. ovs-external-ids setting

+

Table 27. ovs-external-ids setting

@@ -1841,7 +1875,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 27. ovs-interface setting

+

Table 28. ovs-interface setting

@@ -1859,7 +1893,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 28. ovs-patch setting

+

Table 29. ovs-patch setting

@@ -1877,7 +1911,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 29. ovs-port setting

+

Table 30. ovs-port setting

@@ -1895,7 +1929,7 @@ Example: MATCH_PATH="pci-0000:01:00.0 pci-0000:0c:00.0"

-

Table 30. proxy setting

+

Table 31. proxy setting

@@ -1948,7 +1982,7 @@ Example: PAC_SCRIPT=/home/joe/proxy.pac

-

Table 31. sriov setting

+

Table 32. sriov setting

@@ -1993,7 +2027,7 @@ Example: SRIOV_AUTOPROBE_DRIVERS=0,1

-

Table 32. tc setting

+

Table 33. tc setting

@@ -2030,7 +2064,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 33. team-port setting

+

Table 34. team-port setting

@@ -2053,7 +2087,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 34. team setting

+

Table 35. team setting

@@ -2076,7 +2110,7 @@ Example: FILTER1="parent ffff: matchall action simple sdata Inpu

-

Table 35. user setting

+

Table 36. user setting

@@ -2101,7 +2135,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 36. veth setting

+

Table 37. veth setting

@@ -2119,7 +2153,7 @@ Example: NM_USER_FOO__BAR=something

-

Table 37. vlan setting

+

Table 38. vlan setting

@@ -2182,7 +2216,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 38. vrf setting

+

Table 39. vrf setting

@@ -2200,7 +2234,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 39. wifi-p2p setting

+

Table 40. wifi-p2p setting

@@ -2218,7 +2252,7 @@ Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

-

Table 40. 802-3-ethernet setting

+

Table 41. 802-3-ethernet setting

@@ -2339,7 +2373,7 @@ Example: ETHTOOL_OPTS="wol gs sopass 00:11:22:33:44:55"

-

Table 41. wireguard setting

+

Table 42. wireguard setting

@@ -2357,7 +2391,7 @@ Example: ETHTOOL_OPTS="wol gs sopass 00:11:22:33:44:55"

-

Table 42. 802-11-wireless-security setting

+

Table 43. 802-11-wireless-security setting

@@ -2539,7 +2573,7 @@ Allowed values: default, disable, optional, required

-

Table 43. 802-11-wireless setting

+

Table 44. 802-11-wireless setting

@@ -2696,7 +2730,7 @@ Allowed values: "yes", "no"

-

Table 44. wpan setting

+

Table 45. wpan setting

-- cgit 1.3.0-6-gf8a5