connection setting

General Connection Profile Settings.

@@ -122,7 +122,7 @@ autoconnect - + - +

boolean

TRUE

Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. Autoconnect happens when the circumstances are suitable. That means for example that the device is currently managed and not active. Autoconnect thus never replaces or competes with an already active profile. Note that autoconnect is not implemented for VPN profiles. See "secondaries" as an alternative to automatically connect VPN profiles. If multiple profiles are ready to autoconnect on the same device, the one with the better "connection.autoconnect-priority" is chosen. If the priorities are equal, then the most recently connected profile is activated. If the profiles were not connected earlier or their "connection.timestamp" is identical, the choice is undefined. Depending on "connection.multi-connect", a profile can (auto)connect only once at a time or multiple times.

@@ -255,7 +255,7 @@ stable-id

string

This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret-key. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.

This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret_key. See NetworkManager(8) manual about the secret-key and the host identity. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are "${CONNECTION}", "${DEVICE}", "${MAC}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that "${DEVICE}" corresponds to the interface name of the device and "${MAC}" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}-${BOOT}-${DEVICE}" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to "${CONNECTION}" and uses a unique, fixed ID for the connection.

@@ -297,7 +297,7 @@

6lowpan setting

6LoWPAN Settings.

@@ -323,7 +323,7 @@

802-1x setting

IEEE 802.1x Authentication Settings.

@@ -673,7 +673,7 @@

adsl setting

ADSL Settings.

@@ -743,7 +743,7 @@

bluetooth setting

Bluetooth Settings.

@@ -778,7 +778,7 @@

bond setting

Bonding Settings.

@@ -813,7 +813,7 @@

bridge setting

Bridging Settings.

@@ -1030,7 +1030,7 @@

bridge-port setting

Bridge Port Settings.

@@ -1079,7 +1079,7 @@

cdma setting

CDMA-based Mobile Broadband Settings.

@@ -1135,7 +1135,7 @@

dcb setting

Data Center Bridging Settings.

@@ -1261,7 +1261,7 @@

dummy setting

Dummy Link Settings.

@@ -1281,7 +1281,7 @@

ethtool setting

Ethtool Ethernet Settings.

@@ -1301,7 +1301,7 @@

generic setting

Generic Link Settings.

@@ -1321,7 +1321,7 @@

gsm setting

GSM-based Mobile Broadband Settings.

@@ -1440,7 +1440,7 @@

infiniband setting

Infiniband Settings.

@@ -1496,7 +1496,7 @@

ipv4 setting

IPv4 Settings.

@@ -1706,7 +1706,7 @@

ipv6 setting

IPv6 Settings.

@@ -1930,7 +1930,7 @@

ip-tunnel setting

IP Tunneling Settings.

@@ -2042,7 +2042,7 @@

macsec setting

MACSec Settings.

@@ -2126,7 +2126,7 @@

macvlan setting

MAC VLAN Settings.

@@ -2175,7 +2175,7 @@

match setting

Match settings.

@@ -2224,7 +2224,7 @@

802-11-olpc-mesh setting

OLPC Wireless Mesh Settings.

@@ -2266,7 +2266,7 @@

ovs-bridge setting

OvsBridge Link Settings.

@@ -2322,7 +2322,7 @@

ovs-dpdk setting

OvsDpdk Link Settings.

@@ -2357,7 +2357,7 @@

ovs-interface setting

Open vSwitch Interface Settings.

@@ -2383,7 +2383,7 @@

ovs-patch setting

OvsPatch Link Settings.

@@ -2409,7 +2409,7 @@

ovs-port setting

OvsPort Link Settings.

@@ -2472,7 +2472,7 @@

ppp setting

Point-to-Point Protocol Settings.

@@ -2619,7 +2619,7 @@

pppoe setting

PPP-over-Ethernet Settings.

@@ -2675,7 +2675,7 @@

proxy setting

WWW Proxy Settings.

@@ -2710,7 +2710,7 @@ pac-script - +

string

PAC script for the connection.

PAC script for the connection. This is an UTF-8 encoded javascript code that defines a FindProxyForURL() function.

@@ -2724,7 +2724,7 @@

serial setting

Serial Link Settings.

@@ -2780,7 +2780,7 @@

sriov setting

SR-IOV settings.

@@ -2822,7 +2822,7 @@

tc setting

Linux Traffic Control Settings.

@@ -2857,7 +2857,7 @@

team setting

Teaming Settings.

@@ -2997,7 +2997,7 @@

team-port setting

Team Port Settings.

@@ -3067,7 +3067,7 @@

tun setting

Tunnel Settings.

@@ -3130,7 +3130,7 @@

user setting

General User Profile Settings.

@@ -3156,7 +3156,7 @@

vlan setting

VLAN Settings.

@@ -3219,7 +3219,7 @@

vpn setting

VPN Settings.

@@ -3282,7 +3282,7 @@

vrf setting

VRF settings.

@@ -3308,7 +3308,7 @@

vxlan setting

VXLAN Settings.

@@ -3441,7 +3441,7 @@

wifi-p2p setting

Wi-Fi P2P Settings.

@@ -3483,7 +3483,7 @@

wimax setting

WiMax Settings.

@@ -3518,7 +3518,7 @@

802-3-ethernet setting

Wired Ethernet Settings.

@@ -3651,7 +3651,7 @@

wireguard setting

WireGuard Settings.

@@ -3735,7 +3735,7 @@

802-11-wireless setting

Wi-Fi Settings.

@@ -3896,7 +3896,7 @@

802-11-wireless-security setting

Wi-Fi Security Settings.

@@ -4057,7 +4057,7 @@

wpan setting

IEEE 802.15.4 (WPAN) MAC Settings.

@@ -4113,7 +4113,7 @@

bond-port setting

Bond Port Settings.

@@ -4139,7 +4139,7 @@

hostname setting

Hostname settings.

@@ -4188,7 +4188,7 @@

ovs-external-ids setting

OVS External IDs Settings.

@@ -4214,7 +4214,7 @@

veth setting

Veth Settings.

@@ -4278,6 +4278,6 @@ +

Generated by GTK-Doc V1.33.1 \ No newline at end of file -- cgit 1.3.0-6-gf8a5