diff options
Diffstat (limited to 'src/libnmc-setting/settings-docs.h.in')
| -rw-r--r-- | src/libnmc-setting/settings-docs.h.in | 36 |
1 files changed, 23 insertions, 13 deletions
diff --git a/src/libnmc-setting/settings-docs.h.in b/src/libnmc-setting/settings-docs.h.in index 208cad86..b7f1dc24 100644 --- a/src/libnmc-setting/settings-docs.h.in +++ b/src/libnmc-setting/settings-docs.h.in @@ -24,7 +24,7 @@ #define DESCRIBE_DOC_NM_SETTING_CONNECTION_STABLE_ID N_("This represents the identity of the connection used for various purposes. It allows to configure multiple profiles to share the identity. Also, the stable-id can contain placeholders that are substituted dynamically and deterministically depending on the context. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. It is also used as DHCP client identifier with ipv4.dhcp-client-id=stable and to derive the DHCP DUID with ipv6.dhcp-duid=stable-[llt,ll,uuid]. Note that depending on the context where it is used, other parameters are also seeded into the generation algorithm. For example, a per-host key is commonly also included, so that different systems end up generating different IDs. Or with ipv6.addr-gen-mode=stable-privacy, also the device's name is included, so that different interfaces yield different addresses. The per-host key is the identity of your machine and stored in /var/lib/NetworkManager/secret_key. See NetworkManager(8) manual about the secret-key and the host identity. The '$' character is treated special to perform dynamic substitutions at runtime. Currently, supported are \"${CONNECTION}\", \"${DEVICE}\", \"${MAC}\", \"${BOOT}\", \"${RANDOM}\". These effectively create unique IDs per-connection, per-device, per-boot, or every time. Note that \"${DEVICE}\" corresponds to the interface name of the device and \"${MAC}\" is the permanent MAC address of the device. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as \"$$\". For example, set it to \"${CONNECTION}-${BOOT}-${DEVICE}\" to create a unique id for this connection that changes with every reboot and differs depending on the interface where the profile activates. If the value is unset, a global connection default is consulted. If the value is still unset, the default is similar to \"${CONNECTION}\" and uses a unique, fixed ID for the connection.") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_TIMESTAMP N_("The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved).") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_TYPE N_("Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, \"802-3-ethernet\" or \"802-11-wireless\" or \"bluetooth\", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, \"vpn\" or \"bridge\", etc).") -#define DESCRIBE_DOC_NM_SETTING_CONNECTION_UUID N_("A universally unique identifier for the connection, for example generated with libuuid. It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network. For example, it should not be changed when the \"id\" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or \"type\" property changes. The UUID must be in the format \"2815492f-7e56-435e-b2e9-246bd7cdc664\" (ie, contains only hexadecimal characters and \"-\").") +#define DESCRIBE_DOC_NM_SETTING_CONNECTION_UUID N_("The connection.uuid is the real identifier of a profile. It cannot change and it must be unique. It is therefore often best to refer to a profile by UUID, for example with `nmcli connection up uuid $UUID`. The UUID cannot be changed, except in offline mode. In that case, the special values \"new\", \"generate\" and \"\" are allowed to generate a new random UUID.") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_WAIT_ACTIVATION_DELAY N_("Time in milliseconds to wait for connection to be considered activated. The wait will start after the pre-up dispatcher event. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_WAIT_DEVICE_TIMEOUT N_("Timeout in milliseconds to wait for device at startup. During boot, devices may take a while to be detected by the driver. This property will cause to delay NetworkManager-wait-online.service and nm-online to give the device a chance to appear. This works by waiting for the given timeout until a compatible device for the profile is available and managed. The value 0 means no wait time. The default value is -1, which currently has the same meaning as no wait time.") #define DESCRIBE_DOC_NM_SETTING_CONNECTION_ZONE N_("The trust level of a the connection. Free form case-insensitive string (for example \"Home\", \"Work\", \"Public\"). NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately.") @@ -49,7 +49,7 @@ #define DESCRIBE_DOC_NM_SETTING_802_1X_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PASSWORD_RAW N_("Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the \"password\" property and the \"password-raw\" property are specified, \"password\" is preferred.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PASSWORD_RAW_FLAGS N_("Flags indicating how to handle the \"password-raw\" property.") -#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_AUTH_FLAGS N_("Specifies authentication flags to use in \"phase 1\" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details.") +#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_AUTH_FLAGS N_("Specifies authentication flags to use in \"phase 1\" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. TLS time checks can be also disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x and tls_disable_time_checks settings. See the wpa_supplicant documentation for more details.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_FAST_PROVISIONING N_("Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the \"eap\" property. Recognized values are \"0\" (disabled), \"1\" (allow unauthenticated provisioning), \"2\" (allow authenticated provisioning), and \"3\" (allow both authenticated and unauthenticated provisioning). See the wpa_supplicant documentation for more details.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_PEAPLABEL N_("Forces use of the new PEAP label during key derivation. Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1. Set to \"1\" to force use of the new PEAP label. See the wpa_supplicant documentation for more details.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE1_PEAPVER N_("Forces which PEAP version is used when PEAP is set as the EAP method in the \"eap\" property. When unset, the version reported by the server will be used. Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version. To do so, this property may be set to \"0\" or \"1\" to force that specific PEAP version.") @@ -68,13 +68,13 @@ #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_PRIVATE_KEY N_("Contains the \"phase 2\" inner private key when the \"phase2-auth\" or \"phase2-autheap\" property is set to \"tls\". Key data is specified using a \"scheme\"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string \"file://\" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the \"phase2-private-key-password\" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string \"file://\" and ending with a terminating NUL byte, and as with the blob scheme the \"phase2-private-key-password\" property must be set to the password used to decode the PKCS#12 private key and certificate.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_PRIVATE_KEY_PASSWORD N_("The password used to decrypt the \"phase 2\" private key specified in the \"phase2-private-key\" property when the private key either uses the path scheme, or is a PKCS#12 format key.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_PRIVATE_KEY_PASSWORD_FLAGS N_("Flags indicating how to handle the \"phase2-private-key-password\" property.") -#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_SUBJECT_MATCH N_("Substring to be matched against the subject of the certificate presented by the authentication server during the inner \"phase 2\" authentication. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match.") +#define DESCRIBE_DOC_NM_SETTING_802_1X_PHASE2_SUBJECT_MATCH N_("Substring to be matched against the subject of the certificate presented by the authentication server during the inner \"phase 2\" authentication. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and should not be used.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PIN N_("PIN used for EAP authentication methods.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PIN_FLAGS N_("Flags indicating how to handle the \"pin\" property.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PRIVATE_KEY N_("Contains the private key when the \"eap\" property is set to \"tls\". Key data is specified using a \"scheme\"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string \"file://\" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the \"private-key-password\" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string \"file://\" and ending with a terminating NUL byte, and as with the blob scheme the \"private-key-password\" property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: \"private-key\" is not a \"secret\" property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users. Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PRIVATE_KEY_PASSWORD N_("The password used to decrypt the private key specified in the \"private-key\" property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key.") #define DESCRIBE_DOC_NM_SETTING_802_1X_PRIVATE_KEY_PASSWORD_FLAGS N_("Flags indicating how to handle the \"private-key-password\" property.") -#define DESCRIBE_DOC_NM_SETTING_802_1X_SUBJECT_MATCH N_("Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match.") +#define DESCRIBE_DOC_NM_SETTING_802_1X_SUBJECT_MATCH N_("Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and should not be used.") #define DESCRIBE_DOC_NM_SETTING_802_1X_SYSTEM_CA_CERTS N_("When TRUE, overrides the \"ca-path\" and \"phase2-ca-path\" properties using the system CA directory specified at configure time with the --system-ca-path switch. The certificates in this directory are added to the verification chain in addition to any certificates specified by the \"ca-cert\" and \"phase2-ca-cert\" properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides \"ca-cert\" and \"phase2-ca-cert\" properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant).") #define DESCRIBE_DOC_NM_SETTING_ADSL_ENCAPSULATION N_("Encapsulation of ADSL connection. Can be \"vcmux\" or \"llc\".") #define DESCRIBE_DOC_NM_SETTING_ADSL_PASSWORD N_("Password used to authenticate with the ADSL service.") @@ -91,7 +91,7 @@ #define DESCRIBE_DOC_NM_SETTING_BRIDGE_GROUP_ADDRESS N_("If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00.") #define DESCRIBE_DOC_NM_SETTING_BRIDGE_GROUP_FORWARD_MASK N_("A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP.") #define DESCRIBE_DOC_NM_SETTING_BRIDGE_HELLO_TIME N_("The Spanning Tree Protocol (STP) hello time, in seconds.") -#define DESCRIBE_DOC_NM_SETTING_BRIDGE_MAC_ADDRESS N_("If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the \"ethernet.cloned-mac-address\" is referred instead to generate the initial MAC address. Note that setting \"ethernet.cloned-mac-address\" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1") +#define DESCRIBE_DOC_NM_SETTING_BRIDGE_MAC_ADDRESS N_("If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the \"ethernet.cloned-mac-address\" is referred instead to generate the initial MAC address. Note that setting \"ethernet.cloned-mac-address\" anyway overwrites the MAC address of the bridge later while activating the bridge.") #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MAX_AGE N_("The Spanning Tree Protocol (STP) maximum message age, in seconds.") #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MULTICAST_HASH_MAX N_("Set maximum size of multicast hash table (value must be a power of 2).") #define DESCRIBE_DOC_NM_SETTING_BRIDGE_MULTICAST_LAST_MEMBER_COUNT N_("Set the number of queries the bridge will send before stopping forwarding a multicast group after a \"leave\" message has been received.") @@ -143,7 +143,7 @@ #define DESCRIBE_DOC_NM_SETTING_GSM_HOME_ONLY N_("When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made.") #define DESCRIBE_DOC_NM_SETTING_GSM_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.") #define DESCRIBE_DOC_NM_SETTING_GSM_NETWORK_ID N_("The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration. If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible.") -#define DESCRIBE_DOC_NM_SETTING_GSM_NUMBER N_("Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1") +#define DESCRIBE_DOC_NM_SETTING_GSM_NUMBER N_("Legacy setting that used to help establishing PPP data sessions for GSM-based modems.") #define DESCRIBE_DOC_NM_SETTING_GSM_PASSWORD N_("The password used to authenticate with the network, if required. Many providers do not require a password, or accept any password. But if a password is required, it is specified here.") #define DESCRIBE_DOC_NM_SETTING_GSM_PASSWORD_FLAGS N_("Flags indicating how to handle the \"password\" property.") #define DESCRIBE_DOC_NM_SETTING_GSM_PIN N_("If the SIM is locked with a PIN it must be unlocked before any other operations are requested. Specify the PIN here to allow operation of the device.") @@ -157,6 +157,7 @@ #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_PARENT N_("The interface name of the parent device of this device. Normally NULL, but if the \"p_key\" property is set, then you must specify the base device by setting either this property or \"mac-address\".") #define DESCRIBE_DOC_NM_SETTING_INFINIBAND_TRANSPORT_MODE N_("The IP-over-InfiniBand transport mode. Either \"datagram\" or \"connected\".") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_ADDRESSES N_("A list of IPv4 addresses and their prefix length. Multiple addresses can be separated by comma. For example \"192.168.1.5/24, 10.1.0.5/24\". The addresses are listed in decreasing priority, meaning the first address will be the primary address.") +#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_AUTO_ROUTE_EXT_GW N_("VPN connections will default to add the route automatically unless this setting is set to FALSE. For other connection types, adding such an automatic route is currently not supported and setting this to TRUE has no effect.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DAD_TIMEOUT N_("Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network. If an address conflict is detected, the activation will fail. A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero). A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_CLIENT_ID N_("A string sent to the DHCP server to identify the local machine which the DHCP server may use to customize the DHCP lease and options. When the property is a hex string ('aa:bb:cc') it is interpreted as a binary client ID, in which case the first byte is assumed to be the 'type' field as per RFC 2132 section 9.14 and the remaining bytes may be an hardware address (e.g. '01:xx:xx:xx:xx:xx:xx' where 1 is the Ethernet ARP type and the rest is a MAC address). If the property is not a hex string it is considered as a non-hardware-address client ID and the 'type' field is set to 0. The special values \"mac\" and \"perm-mac\" are supported, which use the current or permanent MAC address of the device to generate a client identifier with type ethernet (01). Currently, these options only work for ethernet type of links. The special value \"ipv6-duid\" uses the DUID from \"ipv6.dhcp-duid\" property as an RFC4361-compliant client identifier. As IAID it uses \"ipv4.dhcp-iaid\" and falls back to \"ipv6.dhcp-iaid\" if unset. The special value \"duid\" generates a RFC4361-compliant client identifier based on \"ipv4.dhcp-iaid\" and uses a DUID generated by hashing /etc/machine-id. The special value \"stable\" is supported to generate a type 0 client identifier based on the stable-id (see connection.stable-id) and a per-host key. If you set the stable-id, you may want to include the \"${DEVICE}\" or \"${MAC}\" specifier to get a per-device key. If unset, a globally configured default is used. If still unset, the default depends on the DHCP plugin.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_FQDN N_("If the \"dhcp-send-hostname\" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and \"dhcp-hostname\" are mutually exclusive and cannot be set at the same time.") @@ -167,7 +168,7 @@ #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_SEND_HOSTNAME N_("If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer. If the \"dhcp-hostname\" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_TIMEOUT N_("A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DHCP_VENDOR_CLASS_IDENTIFIER N_("The Vendor Class Identifier DHCP option (60). Special characters in the data string may be escaped using C-style escapes, nevertheless this property cannot contain nul bytes. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the DHCP option is not sent to the server.") -#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS N_("Array of IP addresses of DNS servers.") +#define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS N_("Array of IP addresses of DNS servers. For DoT (DNS over TLS), the SNI server name can be specified by appending \"#example.com\" to the IP address of the DNS server. This currently only has effect when using systemd-resolved.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_OPTIONS N_("Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are \"attempts\", \"debug\", \"edns0\", \"inet6\", \"ip6-bytestring\", \"ip6-dotint\", \"ndots\", \"no-check-names\", \"no-ip6-dotint\", \"no-reload\", \"no-tld-query\", \"rotate\", \"single-request\", \"single-request-reopen\", \"timeout\", \"trust-ad\", \"use-vc\". The \"trust-ad\" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have \"trust-ad\" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then \"edns0\" and \"trust-ad\" are automatically added.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting. A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the \"rotate\" option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins. If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured.") #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_DNS_SEARCH N_("List of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting. When set on a profile that also enabled DHCP, the DNS search list received automatically (option 119 for DHCPv4 and option 24 for DHCPv6) gets merged with the manual list. This can be prevented by setting \"ignore-auto-dns\". Note that if no DNS searches are configured, the fallback will be derived from the domain from DHCP (option 15).") @@ -185,6 +186,7 @@ #define DESCRIBE_DOC_NM_SETTING_IP4_CONFIG_ROUTING_RULES N_("A comma separated list of routing rules for policy routing.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE N_("Configure method for creating the address for use with RFC4862 IPv6 Stateless Address Autoconfiguration. The permitted values are: NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_EUI64 (0), NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_STABLE_PRIVACY (1). NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_DEFAULT_OR_EUI64 (2) or NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE_DEFAULT (3). If the property is set to EUI64, the addresses will be generated using the interface tokens derived from hardware address. This makes the host part of the address to stay constant, making it possible to track host's presence when it changes networks. The address changes when the interface hardware is replaced. The value of stable-privacy enables use of cryptographically secure hash of a secret host-specific key along with the connection's stable-id and the network address as specified by RFC7217. This makes it impossible to use the address track host's presence, and makes the address stable when the network interface hardware is replaced. The special values \"default\" and \"default-or-eui64\" will fallback to the global connection default in as documented in NetworkManager.conf(5) manual. If the global default is not specified, the fallback value is \"stable-privacy\" or \"eui64\", respectively. For libnm, the property defaults to \"default\" since 1.40. Previously it defaulted to \"stable-privacy\". On D-Bus, the absence of an addr-gen-mode setting equals \"default\". For keyfile plugin, the absence of the setting on disk means \"default-or-eui64\" so that the property doesn't change on upgrade from older versions. Note that this setting is distinct from the Privacy Extensions as configured by \"ip6-privacy\" property and it does not affect the temporary addresses configured with this option.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ADDRESSES N_("A list of IPv6 addresses and their prefix length. Multiple addresses can be separated by comma. For example \"2001:db8:85a3::8a2e:370:7334/64, 2001:db8:85a3::5/64\". The addresses are listed in decreasing priority, meaning the first address will be the primary address. This can make a difference with IPv6 source address selection (RFC 6724, section 5).") +#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_AUTO_ROUTE_EXT_GW N_("VPN connections will default to add the route automatically unless this setting is set to FALSE. For other connection types, adding such an automatic route is currently not supported and setting this to TRUE has no effect.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DAD_TIMEOUT N_("Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network. If an address conflict is detected, the activation will fail. A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero). A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_DUID N_("A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value \"lease\" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and \"dhclient\" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values \"llt\" and \"ll\" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values \"stable-llt\", \"stable-ll\" and \"stable-uuid\" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the \"${DEVICE}\" or \"${MAC}\" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of \"stable-ll\" and \"stable-llt\" will be a generated address derived from the stable id. The DUID-LLT time value in the \"stable-llt\" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in \"llt\"). When the property is unset, the global value provided for \"ipv6.dhcp-duid\" is used. If no global value is provided, the default \"lease\" value is assumed.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_HOSTNAME N_("If the \"dhcp-send-hostname\" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and \"dhcp-fqdn\" are mutually exclusive and cannot be set at the same time.") @@ -193,7 +195,7 @@ #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_REJECT_SERVERS N_("Array of servers from which DHCP offers must be rejected. This property is useful to avoid getting a lease from misconfigured or rogue servers. For DHCPv4, each element must be an IPv4 address, optionally followed by a slash and a prefix length (e.g. \"192.168.122.0/24\"). This property is currently not implemented for DHCPv6.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_SEND_HOSTNAME N_("If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer. If the \"dhcp-hostname\" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DHCP_TIMEOUT N_("A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity.") -#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS N_("Array of IP addresses of DNS servers.") +#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS N_("Array of IP addresses of DNS servers. For DoT (DNS over TLS), the SNI server name can be specified by appending \"#example.com\" to the IP address of the DNS server. This currently only has effect when using systemd-resolved.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_OPTIONS N_("Array of DNS options as described in man 5 resolv.conf. NULL means that the options are unset and left at the default. In this case NetworkManager will use default options. This is distinct from an empty list of properties. The currently supported options are \"attempts\", \"debug\", \"edns0\", \"inet6\", \"ip6-bytestring\", \"ip6-dotint\", \"ndots\", \"no-check-names\", \"no-ip6-dotint\", \"no-reload\", \"no-tld-query\", \"rotate\", \"single-request\", \"single-request-reopen\", \"timeout\", \"trust-ad\", \"use-vc\". The \"trust-ad\" setting is only honored if the profile contributes name servers to resolv.conf, and if all contributing profiles have \"trust-ad\" enabled. When using a caching DNS plugin (dnsmasq or systemd-resolved in NetworkManager.conf) then \"edns0\" and \"trust-ad\" are automatically added.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_PRIORITY N_("DNS servers priority. The relative priority for DNS servers specified by this setting. A lower numerical value is better (higher priority). Negative values have the special effect of excluding other configurations with a greater numerical priority value; so in presence of at least one negative priority, only DNS servers from connections with the lowest priority value will be used. To avoid all DNS leaks, set the priority of the profile that should be used to the most negative value of all active connections profiles. Zero selects a globally configured default value. If the latter is missing or zero too, it defaults to 50 for VPNs (including WireGuard) and 100 for other connections. Note that the priority is to order DNS settings for multiple active connections. It does not disambiguate multiple DNS servers within the same connection profile. When multiple devices have configurations with the same priority, VPNs will be considered first, then devices with the best (lowest metric) default route and then all other devices. When using dns=default, servers with higher priority will be on top of resolv.conf. To prioritize a given server over another one within the same connection, just specify them in the desired order. Note that commonly the resolver tries name servers in /etc/resolv.conf in the order listed, proceeding with the next server in the list on failure. See for example the \"rotate\" option of the dns-options setting. If there are any negative DNS priorities, then only name servers from the devices with that lowest priority will be considered. When using a DNS resolver that supports Conditional Forwarding or Split DNS (with dns=dnsmasq or dns=systemd-resolved settings), each connection is used to query domains in its search list. The search domains determine which name servers to ask, and the DNS priority is used to prioritize name servers based on the domain. Queries for domains not present in any search list are routed through connections having the '~.' special wildcard domain, which is added automatically to connections with the default route (or can be added manually). When multiple connections specify the same domain, the one with the best priority (lowest numerical value) wins. If a sub domain is configured on another interface it will be accepted regardless the priority, unless parent domain on the other interface has a negative priority, which causes the sub domain to be shadowed. With Split DNS one can avoid undesired DNS leaks by properly configuring DNS priorities and the search domains, so that only name servers of the desired interface are configured.") #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_DNS_SEARCH N_("List of DNS search domains. Domains starting with a tilde ('~') are considered 'routing' domains and are used only to decide the interface over which a query must be forwarded; they are not used to complete unqualified host names. When using a DNS plugin that supports Conditional Forwarding or Split DNS, then the search domains specify which name servers to query. This makes the behavior different from running with plain /etc/resolv.conf. For more information see also the dns-priority setting. When set on a profile that also enabled DHCP, the DNS search list received automatically (option 119 for DHCPv4 and option 24 for DHCPv6) gets merged with the manual list. This can be prevented by setting \"ignore-auto-dns\". Note that if no DNS searches are configured, the fallback will be derived from the domain from DHCP (option 15).") @@ -215,6 +217,7 @@ #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_ENCAPSULATION_LIMIT N_("How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels.") #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_FLAGS N_("Tunnel flags. Currently, the following values are supported: NM_IP_TUNNEL_FLAG_IP6_IGN_ENCAP_LIMIT (0x1), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_TCLASS (0x2), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FLOWLABEL (0x4), NM_IP_TUNNEL_FLAG_IP6_MIP6_DEV (0x8), NM_IP_TUNNEL_FLAG_IP6_RCV_DSCP_COPY (0x10), NM_IP_TUNNEL_FLAG_IP6_USE_ORIG_FWMARK (0x20). They are valid only for IPv6 tunnels.") #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_FLOW_LABEL N_("The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels.") +#define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_FWMARK N_("The fwmark value to assign to tunnel packets. This property can be set to a non zero value only on VTI and VTI6 tunnels.") #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_INPUT_KEY N_("The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used.") #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_LOCAL N_("The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address.") #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_MODE N_("The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2).") @@ -252,6 +255,9 @@ #define DESCRIBE_DOC_NM_SETTING_OVS_BRIDGE_STP_ENABLE N_("Enable or disable STP.") #define DESCRIBE_DOC_NM_SETTING_OVS_DPDK_DEVARGS N_("Open vSwitch DPDK device arguments.") #define DESCRIBE_DOC_NM_SETTING_OVS_DPDK_N_RXQ N_("Open vSwitch DPDK number of rx queues. Defaults to zero which means to leave the parameter in OVS unspecified and effectively configures one queue.") +#define DESCRIBE_DOC_NM_SETTING_OVS_DPDK_N_RXQ_DESC N_("The rx queue size (number of rx descriptors) for DPDK ports. Must be zero or a power of 2 between 1 and 4096, and supported by the hardware. Defaults to zero which means to leave the parameter in OVS unspecified and effectively configures 2048 descriptors.") +#define DESCRIBE_DOC_NM_SETTING_OVS_DPDK_N_TXQ_DESC N_("The tx queue size (number of tx descriptors) for DPDK ports. Must be zero or a power of 2 between 1 and 4096, and supported by the hardware. Defaults to zero which means to leave the parameter in OVS unspecified and effectively configures 2048 descriptors.") +#define DESCRIBE_DOC_NM_SETTING_OVS_INTERFACE_OFPORT_REQUEST N_("Open vSwitch openflow port number. Defaults to zero which means that port number will not be specified and it will be chosen randomly by ovs. OpenFlow ports are the network interfaces for passing packets between OpenFlow processing and the rest of the network. OpenFlow switches connect logically to each other via their OpenFlow ports.") #define DESCRIBE_DOC_NM_SETTING_OVS_INTERFACE_TYPE N_("The interface type. Either \"internal\", \"system\", \"patch\", \"dpdk\", or empty.") #define DESCRIBE_DOC_NM_SETTING_OVS_PATCH_PEER N_("Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer.") #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_BOND_DOWNDELAY N_("The time port must be inactive in order to be considered down.") @@ -259,7 +265,8 @@ #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_BOND_UPDELAY N_("The time port must be active before it starts forwarding traffic.") #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_LACP N_("LACP mode. One of \"active\", \"off\", or \"passive\".") #define DESCRIBE_DOC_NM_SETTING_OVS_PORT_TAG N_("The VLAN tag in the range 0-4095.") -#define DESCRIBE_DOC_NM_SETTING_OVS_PORT_VLAN_MODE N_("The VLAN mode. One of \"access\", \"native-tagged\", \"native-untagged\", \"trunk\" or unset.") +#define DESCRIBE_DOC_NM_SETTING_OVS_PORT_TRUNKS N_("A list of VLAN ranges that this port trunks. The property is valid only for ports with mode \"trunk\", \"native-tagged\", or \"native-untagged port\". If it is empty, the port trunks all VLANs.") +#define DESCRIBE_DOC_NM_SETTING_OVS_PORT_VLAN_MODE N_("The VLAN mode. One of \"access\", \"native-tagged\", \"native-untagged\", \"trunk\", \"dot1q-tunnel\" or unset.") #define DESCRIBE_DOC_NM_SETTING_PPP_BAUD N_("If non-zero, instruct pppd to set the serial port to the specified baudrate. This value should normally be left as 0 to automatically choose the speed.") #define DESCRIBE_DOC_NM_SETTING_PPP_CRTSCTS N_("If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals. This value should normally be set to FALSE.") #define DESCRIBE_DOC_NM_SETTING_PPP_LCP_ECHO_FAILURE N_("If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer. The \"lcp-echo-interval\" property must also be set to a non-zero value if this property is used.") @@ -332,6 +339,7 @@ #define DESCRIBE_DOC_NM_SETTING_VLAN_ID N_("The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095.") #define DESCRIBE_DOC_NM_SETTING_VLAN_INGRESS_PRIORITY_MAP N_("For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities. The mapping is given in the format \"from:to\" where both \"from\" and \"to\" are unsigned integers, ie \"7:3\".") #define DESCRIBE_DOC_NM_SETTING_VLAN_PARENT N_("If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created. If this property is not specified, the connection must contain an \"802-3-ethernet\" setting with a \"mac-address\" property.") +#define DESCRIBE_DOC_NM_SETTING_VLAN_PROTOCOL N_("Specifies the VLAN protocol to use for encapsulation. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'.") #define DESCRIBE_DOC_NM_SETTING_VPN_DATA N_("Dictionary of key/value pairs of VPN plugin specific data. Both keys and values must be strings.") #define DESCRIBE_DOC_NM_SETTING_VPN_PERSISTENT N_("If the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected.") #define DESCRIBE_DOC_NM_SETTING_VPN_SECRETS N_("Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys. Both keys and values must be strings.") @@ -358,8 +366,8 @@ #define DESCRIBE_DOC_NM_SETTING_WIFI_P2P_PEER N_("The P2P device that should be connected to. Currently, this is the only way to create or join a group.") #define DESCRIBE_DOC_NM_SETTING_WIFI_P2P_WFD_IES N_("The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client.") #define DESCRIBE_DOC_NM_SETTING_WIFI_P2P_WPS_METHOD N_("Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use.") -#define DESCRIBE_DOC_NM_SETTING_WIMAX_MAC_ADDRESS N_("If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1") -#define DESCRIBE_DOC_NM_SETTING_WIMAX_NETWORK_NAME N_("Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1") +#define DESCRIBE_DOC_NM_SETTING_WIMAX_MAC_ADDRESS N_("If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing).") +#define DESCRIBE_DOC_NM_SETTING_WIMAX_NETWORK_NAME N_("Network Service Provider (NSP) name of the WiMAX network this connection should use.") #define DESCRIBE_DOC_NM_SETTING_WIRED_ACCEPT_ALL_MAC_ADDRESSES N_("When TRUE, setup the interface to accept packets for all MAC addresses. This is enabling the kernel interface flag IFF_PROMISC. When FALSE, the interface will only accept the packets with the interface destination mac address or broadcast.") #define DESCRIBE_DOC_NM_SETTING_WIRED_AUTO_NEGOTIATE N_("When TRUE, enforce auto-negotiation of speed and duplex mode. If \"speed\" and \"duplex\" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, \"speed\" and \"duplex\" properties should be both set or link configuration will be skipped.") #define DESCRIBE_DOC_NM_SETTING_WIRED_CLONED_MAC_ADDRESS N_("If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values \"preserve\", \"permanent\", \"random\" and \"stable\" are supported. \"preserve\" means not to touch the MAC address on activation. \"permanent\" means to use the permanent hardware address if the device has one (otherwise this is treated as \"preserve\"). \"random\" creates a random MAC address on each connect. \"stable\" creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to \"preserve\" (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as \"assigned-mac-address\" or the deprecated \"cloned-mac-address\".") @@ -392,7 +400,7 @@ #define DESCRIBE_DOC_NM_SETTING_WIRELESS_HIDDEN N_("If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID. However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air.") #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MAC_ADDRESS N_("If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).") #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MAC_ADDRESS_BLACKLIST N_("A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply. Each MAC address should be given in the standard hex-digits-and-colons notation (eg \"00:11:22:33:44:55\").") -#define DESCRIBE_DOC_NM_SETTING_WIRELESS_MAC_ADDRESS_RANDOMIZATION N_("One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization), NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1") +#define DESCRIBE_DOC_NM_SETTING_WIRELESS_MAC_ADDRESS_RANDOMIZATION N_("One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization), NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address).") #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MODE N_("Wi-Fi network mode; one of \"infrastructure\", \"mesh\", \"adhoc\" or \"ap\". If blank, infrastructure is assumed.") #define DESCRIBE_DOC_NM_SETTING_WIRELESS_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.") #define DESCRIBE_DOC_NM_SETTING_WIRELESS_POWERSAVE N_("One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved.") @@ -431,5 +439,7 @@ #define DESCRIBE_DOC_NM_SETTING_HOSTNAME_FROM_DNS_LOOKUP N_("Whether the system hostname can be determined from reverse DNS lookup of addresses on this device. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_TRUE (1).") #define DESCRIBE_DOC_NM_SETTING_HOSTNAME_ONLY_FROM_DEFAULT N_("If set to NM_TERNARY_TRUE (1), NetworkManager attempts to get the hostname via DHCPv4/DHCPv6 or reverse DNS lookup on this device only when the device has the default route for the given address family (IPv4/IPv6). If set to NM_TERNARY_FALSE (0), the hostname can be set from this device even if it doesn't have the default route. When set to NM_TERNARY_DEFAULT (-1), the value from global configuration is used. If the property doesn't have a value in the global configuration, NetworkManager assumes the value to be NM_TERNARY_FALSE (0).") #define DESCRIBE_DOC_NM_SETTING_HOSTNAME_PRIORITY N_("The relative priority of this connection to determine the system hostname. A lower numerical value is better (higher priority). A connection with higher priority is considered before connections with lower priority. If the value is zero, it can be overridden by a global value from NetworkManager configuration. If the property doesn't have a value in the global configuration, the value is assumed to be 100. Negative values have the special effect of excluding other connections with a greater numerical priority value; so in presence of at least one negative priority, only connections with the lowest priority value will be used to determine the hostname.") -#define DESCRIBE_DOC_NM_SETTING_OVS_EXTERNAL_IDS_DATA N_("A dictionary of key/value pairs with exernal-ids for OVS.") +#define DESCRIBE_DOC_NM_SETTING_LOOPBACK_MTU N_("If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames.") +#define DESCRIBE_DOC_NM_SETTING_OVS_EXTERNAL_IDS_DATA N_("A dictionary of key/value pairs with external-ids for OVS.") +#define DESCRIBE_DOC_NM_SETTING_OVS_OTHER_CONFIG_DATA N_("A dictionary of key/value pairs with other_config settings for OVS. See also \"other_config\" in the \"ovs-vswitchd.conf.db\" manual for the keys that OVS supports.") #define DESCRIBE_DOC_NM_SETTING_VETH_PEER N_("This property specifies the peer interface name of the veth. This property is mandatory.") |