diff options
Diffstat (limited to 'man/nmcli.1.in')
| -rw-r--r-- | man/nmcli.1.in | 1282 |
1 files changed, 0 insertions, 1282 deletions
diff --git a/man/nmcli.1.in b/man/nmcli.1.in deleted file mode 100644 index 3c76348f..00000000 --- a/man/nmcli.1.in +++ /dev/null @@ -1,1282 +0,0 @@ -.\" nmcli (1) manual page -.\" -.\" This is free documentation; you can redistribute it and/or -.\" modify it under the terms of the GNU General Public License as -.\" published by the Free Software Foundation; either version 2 of -.\" the License, or (at your option) any later version. -.\" -.\" The GNU General Public License's references to "object code" -.\" and "executables" are to be interpreted as the output of any -.\" document formatting or typesetting system, including -.\" intermediate and printed output. -.\" -.\" This manual is distributed in the hope that it will be useful, -.\" but WITHOUT ANY WARRANTY; without even the implied warranty of -.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -.\" GNU General Public License for more details. -.\" -.\" You should have received a copy of the GNU General Public Licence along -.\" with this manual; if not, write to the Free Software Foundation, Inc., -.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -.\" -.\" Copyright 2010 - 2015 Red Hat, Inc. -.\" -.TH NMCLI "1" "2016-03-09" "NetworkManager 1.2" - -.SH NAME -nmcli \- command\(hyline tool for controlling NetworkManager -.SH SYNOPSIS -.ad l -.B nmcli -.RI " [ " OPTIONS " ] " OBJECT " { " COMMAND " | " -.BR help " } " -.sp - -.IR OBJECT " := { " -.BR general " | " networking " | " radio " | " connection " | " device " | " agent " | " monitor -.RI " }" -.sp - -.IR OPTIONS " := { " -.br -\fB\-t\fR[\fIerse\fR] -.br -\fB\-p\fR[\fIretty\fR] -.br -\fB\-m\fR[\fImode\fR] tabular | multiline -.br -\fB\-c\fR[\fIcolors\fR] auto | yes | no -.br -\fB\-f\fR[\fIields\fR] <field1,field2,...> | all | common -.br -\fB\-e\fR[\fIscape\fR] yes | no -.br -\fB\-n\fR[\fIocheck\fR] -.br -\fB\-a\fR[\fIsk\fR] -.br -\fB\-s\fR[\fIhow-secrets\fR] -.br -\fB\-w\fR[\fIait\fR] <seconds> -.br -\fB\-v\fR[\fIersion\fR] -.br -\fB\-h\fR[\fIelp\fR] -.br -.RI "}" - -.SH DESCRIPTION -.B nmcli -is a command\(hyline tool for controlling NetworkManager and reporting network -status. It can be utilized as a replacement for \fInm\(hyapplet\fP or other -graphical clients. \fInmcli\fP is used to create, display, edit, delete, activate, -and deactivate network connections, as well as control and display network device -status. -.P -Typical uses include: -.IP \(em 4 -Scripts: utilize NetworkManager via \fInmcli\fP instead of managing network -connections manually. \fInmcli\fP supports a terse output format which is better -suited for script processing. Note that NetworkManager can also execute scripts, -called "dispatcher scripts", in response to network events. See -\fBNetworkManager\fP for details about these dispatcher scripts. -.IP \(em 4 -Servers, headless machines, and terminals: \fInmcli\fP can be used to control -NetworkManager without a GUI, including creating, editing, starting and stopping -network connections and viewing network status. -.SS \fIOPTIONS\fP -.TP -.B \-t, \-\-terse -Output is terse. This mode is designed and suitable for computer (script) -processing. -.TP -.B \-p, \-\-pretty -Output is pretty. This causes \fInmcli\fP to produce easily readable outputs -for humans, i.e. values are aligned, headers are printed, etc. -.TP -.B \-m, \-\-mode tabular | multiline -Switch between \fItabular\fP and \fImultiline\fP output. -If omitted, default is \fItabular\fP for most commands. For the commands -producing more structured information, that cannot be displayed on a single -line, default is \fImultiline\fP. Currently, they are: -.br -.nf - 'nmcli connection show <ID>' - 'nmcli device show' -.fi -\fItabular\fP \(en Output is a table where each line describes a single entry. -Columns define particular properties of the entry. -.br -\fImultiline\fP \(en Each entry comprises multiple lines, each property on its own -line. The values are prefixed with the property name. -.TP -.B \-c, \-\-colors auto|yes|no -This option controls color output (using terminal escape sequences). \fIyes\fP -enables colors, \fIno\fP disables them, \fIauto\fP only produces colors when -standard output is directed to a terminal. The default value is \fIauto\fP. -.TP -.B \-f, \-\-fields <field1,field2,...> | all | common -This option is used to specify what fields (column names) should be printed. -Valid field names differ for specific commands. List available fields by -providing an invalid value to the \fI\-\-fields\fP option. -.br -\fIall\fP is used to print all valid field values of the command. -\fIcommon\fP is used to print common field values of the command. -If omitted, default is \fIcommon\fP. -The option is mandatory when \fI\-\-terse\fP is used. In this case, generic -values \fIall\fP and \fIcommon\fP cannot be used. (This is to maintain -compatibility when new fields are added in the future). -.TP -.B \-e, \-\-escape yes | no -Whether to escape ':' and '\\' characters in terse tabular mode. The escape -character is '\\'. -If omitted, default is \fIyes\fP. -.TP -.B \-n, \-\-nocheck -This option can be used to force \fInmcli\fP to skip checking \fInmcli\fP and -\fINetworkManager\fP version compatibility. Use it with care, because using -incompatible versions may produce incorrect results. -.TP -.B \-a, \-\-ask -When using this option \fInmcli\fP will stop and ask for any missing required -arguments, so do not use this option for non-interactive purposes like scripts. -This option controls, for example, whether you will be prompted for a password -if it is required for connecting to a network. -.TP -.B \-s, \-\-show-secrets -When using this option \fInmcli\fP will display passwords and secrets that might -be present in an output of an operation. This option also influences echoing -passwords typed by user as an input. -.TP -.B \-w, \-\-wait <seconds> -This option sets a timeout period for which \fInmcli\fP will wait for \fINetworkManager\fP -to finish operations. It is especially useful for commands that may take a longer time to -complete, e.g. connection activation. -Specifying a value of \fB0\fP instructs \fInmcli\fP not to wait but to exit immediately -with a status of success. The default value depends on the executed command. -.TP -.B \-v, \-\-version -Show \fInmcli\fP version. -.TP -.B \-h, \-\-help -Print help information. -.SS \fIOBJECT\fP -.TP -.B general \- general \fINetworkManager\fP status and operations -.br -Use this object to show NetworkManager status and permissions. You can also get -and change system hostname, as well as NetworkManager logging level and domains. -.TP -.SS \fICOMMAND\fP := { status | hostname | permissions | logging } -.sp -.RS -.TP -.B status -.br -Show overall status of NetworkManager. This is the default action, when no additional -command is provided for \fIgeneral\fP object. -.TP -.B hostname [<hostname>] -.br -Get and change system hostname. With no arguments, this prints currently configured hostname. -When you pass a hostname, it will be handed over to NetworkManager to be set as a new system -hostname. -.br -Note that the term \fBsystem\fP hostname may also be referred to as \fBpersistent\fP or -\fBstatic\fP by other programs or tools. The hostname is stored in /etc/hostname -file in most distributions. For example, systemd-hostnamed service uses the term -\fBstatic\fP hostname and it only reads the /etc/hostname file when it starts. -.TP -.B permissions -.br -Show the permissions a caller has for various authenticated operations that -NetworkManager provides, like enable and disable networking, changing Wi\(hyFi -and WWAN state, modifying connections, etc. -.TP -.B logging [level <log level>] [domains <log domains>] -.br -Get and change \fINetworkManager\fP logging level and domains. Without any argument -current logging level and domains are shown. In order to change logging state, provide -\fIlevel\fP and, or, \fIdomain\fP parameters. See \fBNetworkManager.conf\fP for available -level and domain values. -.RE - -.TP -.B networking \- get or set general networking state of NetworkManager -.br -Use this object to show NetworkManager networking status, or to enable and disable -networking. Disabling networking removes the configuration from all devices and -changes them to the 'unmanaged' state. -.TP -.SS \fICOMMAND\fP := { [ on | off | connectivity ] } -.sp -.RS -.TP -.B [ on | off ] -.br -Get networking\(hyenabled status or enable and disable networking by NetworkManager. -All interfaces managed by NetworkManager are deactivated when networking has -been disabled. -.TP -.B connectivity [check] -.br -Get network connectivity state. -The optional \fIcheck\fP argument tells NetworkManager to re-check the connectivity, -else the most recent known connectivity state is displayed without re-checking. -.br -Possible states are: -.RS -.PP -.IP \fInone\fP 9 -\(en the host is not connected to any network -.IP \fIportal\fP 9 -\(en the host is behind a captive portal and cannot reach the full Internet -.IP \fIlimited\fP 9 -\(en the host is connected to a network, but it has no access to the Internet -.IP \fIfull\fP 9 -\(en the host is connected to a network and has full access to the Internet -.IP \fIunknown\fP 9 -\(en the connectivity status cannot be found out -.RE -.RE - -.TP -.B radio \- get or set radio switch states -.br -Use this object to show radio switches status, or enable and disable -the switches. -.TP -.SS \fICOMMAND\fP := { all | wifi | wwan } -.sp -.RS -.TP -.B wifi [ on | off ] -.br -Show or set status of Wi\(hyFi in NetworkManager. If no arguments are supplied, -Wi\(hyFi status is printed; \fIon\fP enables Wi\(hyFi; \fIoff\fP disables Wi\(hyFi. -.TP -.B wwan [ on | off ] -.br -Show or set status of WWAN (mobile broadband) in NetworkManager. If no arguments -are supplied, mobile broadband status is printed; \fIon\fP enables mobile broadband, -\fIoff\fP disables it. -.TP -.B all [ on | off ] -.br -Show or set all previously mentioned radio switches at the same time. -.RE - -.TP -.B monitor \- monitor NetworkManager -.br -Use this object to observe NetworkManager activity. Watches for changes -in connectivity state, devices or connection profiles. -.br -See also \fImonitor\fP command of \fIconnection\fP or \fIdevice\fP object -to watch for changes in certain objects or object classes. -.RE - -.TP -.B connection \- start, stop, and manage network connections -.sp -NetworkManager stores all network configuration as \fIconnections\fP, which are -collections of data (Layer2 details, IP addressing, etc.) that describe -how to create or connect to a network. A connection is \fIactive\fP when -a device uses that connection's configuration to create or connect to a network. -There may be multiple connections that apply to a device, but only one of them -can be active on that device at any given time. The additional connections can -be used to allow quick switching between different networks and configurations. -.sp -Consider a machine which is usually connected to a DHCP-enabled network, but -sometimes connected to a testing network which uses static IP addressing. Instead -of manually reconfiguring eth0 each time the network is changed, the settings can -be saved as two connections which both apply to eth0, one for DHCP (called -"default") and one with the static addressing details (called "testing"). When -connected to the DHCP-enabled network the user would run "nmcli con up default" -, and when connected to the static network the user would run "nmcli con up testing". -.TP -.SS \fICOMMAND\fP := { show | up | down | add | edit | modify | delete | monitor | reload | load } -.sp -.RS -.TP -.B show [--active] -.br -List in-memory and on-disk connection profiles, some of which may also be -active if a device is using that connection profile. Without a parameter, all -profiles are listed. When --active option is specified, only the active profiles -are shown. -.TP -.B show [--active] [--order <order spec>] [ id | uuid | path | apath ] <ID> ... -.br -Show details for specified connections. By default, both static configuration -and active connection data are displayed. When --active option is specified, -only the active profiles are taken into account. Use global --show-secrets option -to display secrets associated with the profile. -.sp -Ordering: -.br -The --order option can be used to get custom ordering of connections. The -connections can be ordered by active status, name, type or D-Bus path. If -connections are equal according to a sort order category, an additional -category can be specified. -The default sorting order is equivalent to "--order active:name:path". -.sp -<order spec> := category:category:... -.br -category := [+-]active | [+-]name | [+-]type | [+-]path -.br -\fI+\fP or no prefix means sorting in ascending order (alphabetically or in numbers). -.br -\fI-\fP means reverse (descending) order. -.br -The category names can be abbreviated (e.g. --order -a:na) -.sp -\fIid\fP, \fIuuid\fP, \fIpath\fP and \fIapath\fP keywords can be used if -\fI<ID>\fP is ambiguous. -.RS -.PP -Optional <ID>-specifying keywords are: -.IP \fIid\fP 13 -\(en the <ID> denotes a connection name -.IP \fIuuid\fP 13 -\(en the <ID> denotes a connection UUID -.IP \fIpath\fP 13 -\(en the <ID> denotes a D-Bus static connection path -in the format of /org/freedesktop/NetworkManager/Settings/<num> or just <num> -.IP \fIapath\fP 13 -\(en the <ID> denotes a D-Bus active connection path -in the format of /org/freedesktop/NetworkManager/ActiveConnection/<num> or just <num> -.PP -It is possible to filter the output using the global \fI--fields\fP option. Use the following -values: -.RE -.RS -.PP -.IP \fIprofile\fP 13 -\(en only shows static profile configuration -.IP \fIactive\fP 13 -\(en only shows active connection data (when the profile is active) -.PP -You can also specify particular fields. For static configuration, use setting and property names -as described in \fInm-settings\fP(5) manual page. For active data use GENERAL, IP4, DHCP4, IP6, -DHCP6, VPN. -.PP -When no command is given to the \fIconnection\fP object, the default action -is 'nmcli connection show'. -.RE -.TP -.B up [ id | uuid | path ] <ID> [ifname <ifname>] [ap <BSSID>] [passwd-file <file with passwords>] -.RE -.RS -.B up ifname <ifname> [ap <BSSID>] [passwd-file <file with passwords>] -.RS -.br -Activate a connection. The connection is identified by its name, UUID or D-Bus -path. If <ID> is ambiguous, a keyword \fIid\fP, \fIuuid\fP or \fIpath\fP can be -used. When requiring a particular device to activate the connection on, the -\fIifname\fP option with interface name should be given. If the <ID> is not -given an \fIifname\fP is required, and NetworkManager will activate the best -available connection for the given \fIifname\fP. In case of a VPN connection, -the \fIifname\fP option specifies the device of the base connection. The -\fIap\fP option specify what particular AP should be used in case of a Wi\(hyFi -connection. -.br -If '--wait' option is not specified, the default timeout will be 90 seconds. -.br -See \fBconnection show\fP above for the description of the <ID>-specifying keywords. -.RS -.PP -Available options are: -.IP \fIifname\fP 13 -\(en interface that will be used for activation -.IP \fIap\fP 13 -\(en BSSID of the AP which the command should connect to (for Wi\(hyFi connections) -.IP \fIpasswd-file\fP 13 -\(en some networks may require credentials during activation. You can give these -credentials using this option. -Each line of the file should contain one password in the form of -.br -\fBsetting_name.property_name:the password\fP -.br -For example, for WPA Wi-Fi with PSK, the line would be -.br -\fI802-11-wireless-security.psk:secret12345\fP -.br -For 802.1X password, the line would be -.br -\fI802-1x.password:my 1X password\fP -.br -nmcli also accepts "wifi-sec" and "wifi" strings instead of "802-11-wireless-security". -When NetworkManager requires a password and it is not given, nmcli will ask for it -when run with --ask. If --ask was not passed, NetworkManager can ask another secret -agent that may be running (typically a GUI secret agent, such as nm-applet or -gnome-shell). -.RE -.RE -.TP -.B down [ id | uuid | path | apath ] <ID> ... -.br -Deactivate a connection from a device without preventing the device from -further auto-activation. Multiple connections can be passed to the command. -.sp -Be aware that this command deactivates the specified active connection, but the device -on which the connection was active, is still ready to connect and will perform -auto-activation by looking for a suitable connection that has the 'autoconnect' -flag set. This includes the just deactivated connection. So if the connection is set -to auto-connect, it will be automatically started on the disconnected device again. -.br -In most cases you may want to use \fIdevice disconnect\fP command instead. -.sp -The connection is identified by its name, UUID or D-Bus path. -If <ID> is ambiguous, a keyword \fIid\fP, \fIuuid\fP, \fIpath\fP or -\fIapath\fP can be used. -.br -See \fBconnection show\fP above for the description of the <ID>-specifying keywords. -.br -If '--wait' option is not specified, the default timeout will be 10 seconds. -.TP -.B add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS IP_OPTIONS [-- [+|-]<setting>.<property> <value> ...] -.br -Add a connection for NetworkManager. Arguments differ according to connection types, see below. -.RS -.TP -.B COMMON_OPTIONS: -.IP "\fItype <type>\fP" 42 -\(en connection type; see below \fBTYPE_SPECIFIC_OPTIONS\fP for allowed values; (mandatory) -Note that types \fIbond-slave\fP, \fIteam-slave\fP and \fIbridge-slave\fP create \fIethernet\fP -connection profiles. Their use is discouraged in favor of using a specific type with \fImaster\fP -option. -.IP "\fIifname <ifname> | \(dq\&*\(dq\&\fP" 42 -\(en interface to bind the connection to. The connection will only be applicable to this -interface name. A special value of "\fB*\fP" can be used for interface-independent connections. -The \fIifname\fP argument is mandatory for all connection types except bond, team, bridge and vlan. -Note: use quotes around \fB*\fP to suppress shell expansion. -.IP "\fI[con-name <connection name>]\fP" 42 -\(en connection name (when not provided a default name is generated: <type>[-<ifname>][-<num>]) -.IP "\fI[autoconnect yes|no]\fP" 42 -\(en whether the connection profile can be automatically activated (default: yes) -.IP "\fI[save yes|no]\fP" 42 -\(en whether the connection should be persistent, i.e. NetworkManager should store it on disk (default: yes) -.IP "\fI[master <master (ifname, or connection UUID or name)>]\fP" 42 -\(en master interface name, or connection UUID or ID of master connection profile. -The value can be prefixed with \fBifname/\fP, \fBuuid/\fP or \fBid/\fP to disambiguate it. -.IP "\fI[slave-type <master connection type>]\fP" 42 -\(en type of master connection. Only required when it can not be inferred (i.e. the master connection does -not exist yet). -.RE -.RS -.TP -.B TYPE_SPECIFIC_OPTIONS: -.TP -.B ethernet: -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the device this connection is locked to -.IP "\fI[cloned-mac <cloned MAC address>]\fP" 42 -\(en cloned MAC -.IP "\fI[mtu <MTU>]\fP" 42 -\(en MTU -.RE -.RS -.TP -.B wifi: -.IP "\fIssid <SSID>\fP" 42 -\(en SSID -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the device this connection is locked to -.IP "\fI[cloned-mac <cloned MAC address>]\fP" 42 -\(en cloned MAC -.IP "\fI[mode infrastructure|ap|adhoc]\fP" 42 -\(en Wi-Fi network mode. If blank, \fIinfrastructure\fP is assumed. -.IP "\fI[mtu <MTU>]\fP" 42 -\(en MTU -.RE -.RS -.TP -.B wimax: -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the device this connection is locked to -.IP "\fI[nsp <NSP>]\fP" 42 -\(en Network Service Provider name -.RE -.RS -.TP -.B pppoe: -.IP "\fIusername <PPPoE username>\fP" 42 -\(en PPPoE username -.IP "\fI[password <PPPoE password>]\fP" 42 -\(en Password for the PPPoE username -.IP "\fI[service <PPPoE service name>]\fP" 42 -\(en PPPoE service name (if required by concentrator) -.IP "\fI[mtu <MTU>]\fP" 42 -\(en MTU -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the device this connection is locked to -.RE -.RS -.TP -.B gsm: -.IP "\fIapn <APN>\fP" 42 -\(en APN - GSM Access Point Name -.IP "\fI[user <username>]\fP" 42 -\(en user name -.IP "\fI[password <password>]\fP" 42 -\(en password -.RE -.RS -.TP -.B cdma: -.IP "\fI[user <username>]\fP" 42 -\(en user name -.IP "\fI[password <password>]\fP" 42 -\(en password -.RE -.RS -.TP -.B infiniband: -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the device this connection is locked to (InfiniBand MAC is 20 bytes) -.IP "\fI[mtu <MTU>]\fP" 42 -\(en MTU -.IP "\fI[transport-mode datagram | connected]\fP" 42 -\(en InfiniBand transport mode -.IP "\fI[parent <interface name>]\fP" 42 -\(en the interface name of the parent device (if any) -.IP "\fI[p-key <IPoIB P_Key>]\fP" 42 -\(en the InfiniBand P_Key (16-bit unsigned integer) -.RE -.RS -.TP -.B bluetooth: -.IP "\fI[addr <bluetooth address>]\fP" 42 -\(en Bluetooth device address (MAC) -.IP "\fI[bt-type panu|dun-gsm|dun-cdma]\fP" 42 -\(en Bluetooth connection type -.RE -.RS -.TP -.B vlan: -.IP "\fIdev <parent device (connection UUID, ifname, or MAC)>\fP" 42 -\(en parent device this VLAN is on -.IP "\fIid <VLAN ID>\fP" 42 -\(en VLAN ID in range <0-4095> -.IP "\fI[flags <VLAN flags>]\fP" 42 -\(en flags -.IP "\fI[ingress <ingress priority mapping>]\fP" 42 -\(en VLAN ingress priority mapping -.IP "\fI[egress <egress priority mapping>]\fP" 42 -\(en VLAN egress priority mapping -.IP "\fI[mtu <MTU>]\fP" 42 -\(en MTU -.RE -.RS -.TP -.B bond: -.IP "\fI[mode balance-rr (0) | active-backup (1) | balance-xor (2) | broadcast (3) |\fP" -.IP "\fI 802.3ad (4) | balance-tlb (5) | balance-alb (6)]\fP" 42 -\(en bonding mode (default: balance-rr) -.IP "\fI[primary <ifname>]\fP" 42 -\(en primary interface name (for "active-backup" mode) -.IP "\fI[miimon <num>]\fP" 42 -\(en miimon (default: 100) -.IP "\fI[downdelay <num>]\fP" 42 -\(en downdelay (default: 0) -.IP "\fI[updelay <num>]\fP" 42 -\(en updelay (default: 0) -.IP "\fI[arp-interval <num>]\fP" 42 -\(en ARP interval (default: 0) -.IP "\fI[arp-ip-target <num>]\fP" 42 -\(en ARP IP target -.RE -.RS -.TP -.B bond-slave: -.IP "\fImaster <master (ifname, or connection UUID or name)>\fP" 42 -\(en master bond interface name, or connection UUID or ID of bond master connection profile. -The value can be prefixed with \fBifname/\fP, \fBuuid/\fP or \fBid/\fP to disambiguate it. -.RE -.RS -.TP -.B team: -.IP "\fI[config <file>|<raw JSON data>]\fP" 42 -\(en JSON configuration for team -.RE -.RS -.TP -.B team-slave: -.IP "\fImaster <master (ifname, or connection UUID or name)>\fP" 42 -\(en master team interface name, or connection UUID or ID of team master connection profile. -The value can be prefixed with \fBifname/\fP, \fBuuid/\fP or \fBid/\fP to disambiguate it. -.RE -.RS -.TP -.IP "\fI[config <file>|<raw JSON data>]\fP" 42 -\(en JSON configuration for team -.RE -.RS -.TP -.B bridge: -.IP "\fI[stp yes|no]\fP" 42 -\(en controls whether Spanning Tree Protocol (STP) is enabled for this bridge (default: yes) -.IP "\fI[priority <num>]\fP" 42 -\(en sets STP priority (default: 128) -.IP "\fI[forward-delay <2-30>]\fP" 42 -\(en STP forwarding delay, in seconds (default: 15) -.IP "\fI[hello-time <1-10>]\fP" 42 -\(en STP hello time, in seconds (default: 2) -.IP "\fI[max-age <6-42>]\fP" 42 -\(en STP maximum message age, in seconds (default: 20) -.IP "\fI[ageing-time <0-1000000>]\fP" 42 -\(en the Ethernet MAC address aging time, in seconds (default: 300) -.IP "\fI[multicast-snooping yes|no]\fP" 42 -\(en controls whether IGMP snooping is enabled (default: yes) -.IP "\fI[mac <MAC address>]\fP" 42 -\(en MAC address of the bridge (note: this requires a recent kernel feature, -originally introduced in 3.15 upstream kernel) -.RE -.RS -.TP -.B bridge-slave: -.IP "\fImaster <master (ifname, or connection UUID or name)>\fP" 42 -\(en master bridge interface name, or connection UUID or ID of bridge master connection profile. -The value can be prefixed with \fBifname/\fP, \fBuuid/\fP or \fBid/\fP to disambiguate it. -.RE -.RS -.TP -.IP "\fI[priority <0-63>]\fP" 42 -\(en STP priority of this slave (default: 32) -.IP "\fI[path-cost <1-65535>]\fP" 42 -\(en STP port cost for destinations via this slave (default: 100) -.IP "\fI[hairpin yes|no]\fP" 42 -\(en 'hairpin mode' for the slave, which allows frames -to be sent back out through the slave the frame was received on (default: yes) -.RE -.RS -.TP -.B vpn: -.IP "\fIvpn-type vpnc|openvpn|pptp|openconnect|openswan|libreswan|strongswan|ssh|l2tp|iodine|fortisslvpn|...\fP" 42 -\(en VPN type -.IP "\fI[user <username>]\fP" 42 -\(en VPN username -.RE -.RS -.TP -.B olpc-mesh: -.IP "\fIssid <SSID>\fP" 42 -\(en SSID -.IP "\fI[channel <1-13>]\fP" 42 -\(en channel to use for the network -.IP "\fI[dhcp-anycast <MAC address>]\fP" 42 -\(en anycast DHCP MAC address used when requesting an IP address via DHCP -.RE -.RS -.TP -.B adsl: -.IP "\fIusername <username>\fP" 42 -\(en ADSL user name -.IP "\fIprotocol pppoa|pppoe|ipoatm\fP" 42 -\(en ADSL protocol -.IP "\fI[password <password>]\fP" 42 -\(en ADSL password -.IP "\fI[encapsulation vcmux|llc]\fP" 42 -\(en ADSL encapsulation -.RE -.RS -.TP -.B tun: -.IP "\fImode tun|tap\fP" 42 -\(en Mode for the device -.IP "\fI[owner <UID>]\fP" 42 -\(en UID of the owner -.IP "\fI[group <GID>]\fP" 42 -\(en GID of the group -.IP "\fI[pi yes|no>]\fP" 42 -\(en include packet information (~IFF_NO_PI flag) -.IP "\fI[vnet-hdr yes|no>]\fP" 42 -\(en send and receive large (i.e. GSO) packets and packets with partial checksums (IFF_VNET_HDR flag) -.IP "\fI[multi-queue yes|no>]\fP" 42 -\(en multi-queue support for tun/tap device (IFF_MULTI_QUEUE flag) -.RE -.RS -.TP -.B ip-tunnel: -.IP "\fImode ipip|gre|sit|isatap|vti|ip6ip6|ipip6|ip6gre|vti6\fP" 42 -\(en tunnel mode -.IP "\fIremote <remote endpoint IP>\fP" 42 -\(en IPv4 or IPv6 address of the remote tunnel endpoint -.IP "\fI[local <local endpoint IP>]\fP" 42 -\(en IPv4 or IPv6 address of the local tunnel endpoint -.IP "\fI[dev <parent device (ifname or connection UUID)>]\fP" 42 -\(en device to use for tunnel endpoint communication -.RE -.RS -.TP -.B macvlan: -.IP "\fIdev <parent device (connection UUID, ifname, or MAC)>\fP" 42 -\(en parent device this MACVLAN is on -.IP "\fImode vepa|bridge|private|passthru|source\fP" 42 -\(en MACVLAN mode, which specifies the communication mechanism between multiple MACVLANs on the same lower device -.IP "\fI[tap yes|no]\fP" 42 -\(en controls the device type. If set to 'yes' a MACVTAP will be created (default: no) -.RE -.RS -.TP -.B vxlan: -.IP "\fIid <VXLAN ID>\fP" 42 -\(en VXLAN Network Identifer to use -.IP "\fIremote <IP>\fP" 42 -\(en unicast destination IP address or multicast IP address to join -.IP "\fI[dev <parent device (ifname or connection UUID)>]\fP" 42 -\(en device to use for tunnel endpoint communication -.IP "\fI[local <IP>]\fP" 42 -\(en source IP address -.IP "\fI[source-port-min <0-65535>]\fP" 42 -\(en minimum UDP source port to communicate to the remote VXLAN tunnel endpoint -.IP "\fI[source-port-max <0-65535>]\fP" 42 -\(en maximum UDP source port to communicate to the remote VXLAN tunnel endpoint -.IP "\fI[destination-port <0-65535>]\fP" 42 -\(en UDP destination port to communicate to the remote VXLAN tunnel endpoint -.RE -.RS -.TP -.B IP_OPTIONS: -.IP "\fI[ip4 <IPv4 address>] [gw4 <IPv4 gateway>]\fP" 42 -\(en IPv4 addresses -.IP "\fI[ip6 <IPv6 address>] [gw6 <IPv6 gateway>]\fP" 42 -\(en IPv6 addresses -.RE -.RS -If a \fI--\fP argument is encountered, the rest of command line is interpreted -as property list in the same format as \fIconnection modify\fP command accepts. -This makes it possible to adjust the connection properties before it's added. -.RE -.TP -.B edit [id | uuid | path ] <ID> - edit an existing connection -.RE -.RS -.B edit [type <new connection type>] [con-name <new connection name>] - add a new connection -.RS -Edit an existing connection or add a new one, using an interactive editor. -.br -The existing connection is identified by its name, UUID or D-Bus path. -If <ID> is ambiguous, a keyword \fIid\fP, \fIuuid\fP, or \fIpath\fP can be used. -See \fBconnection show\fP above for the description of the <ID>-specifying keywords. -Not providing an <ID> means that a new connection will be added. -.sp -The interactive editor will guide you through the connection editing and -allow you to change connection parameters according to your needs by means of -a simple menu-driven interface. The editor indicates what settings and -properties can be modified and provides in-line help. -.sp -.PP -Available options: -.IP \fItype\fP 13 -\(en type of the new connection; valid types are the same as for \fIconnection add\fP command -.IP \fIcon-name\fP 13 -\(en name for the new connection. It can be changed later in the editor. -.RE -.RS -.sp -See also \fInm-settings\fP(5) for all NetworkManager settings and property names, and their -descriptions; and \fInmcli-examples\fP(5) for sample editor sessions. -.RE -.TP -.B modify [--temporary] [ id | uuid | path ] <ID> [+|-]<setting>.<property> <value> -.B [+|-]<setting>.<property> <value> ... -.br -Modify one or more properties in the connection profile. -.br -The connection is identified by its name, UUID or D-Bus path. If <ID> is -ambiguous, a keyword \fIid\fP, \fIuuid\fP or \fIpath\fP can be used. See -\fInm-settings\fP(5) for setting and property names, their descriptions and -default values. This command supports abbreviations for \fIsetting name\fP and -\fIproperty name\fP provided they are unique. Empty \fIvalue\fP ("") removes -the property value (sets the property to the default value). The provided -value overwrites the existing property value. -.br -If you want to append an item to the existing value, use \fI+\fP prefix for the -property name. If you want to remove just one item from container-type -property, use \fI-\fP prefix for the property name and specify a value or an -zero-based index of the item to remove (or option name for properties with -named options) as \fIvalue\fP. Of course, \fI+|-\fP only have a real effect for -multi-value (container) properties like ipv4.dns, ipv4.addresses, bond.options, -etc. -.br -The changes to the connection profile will be saved persistently by -NetworkManager, unless \fI--temporary\fP option is provided, in which case the -changes won't persist over NetworkManager restart. -.TP -.B clone [--temporary] [ id | uuid | path ] <ID> <new name> -.br -Clone a connection. The connection to be cloned is identified by its -name, UUID or D-Bus path. If <ID> is ambiguous, a keyword \fIid\fP, -\fIuuid\fP or \fIpath\fP can be used. See \fBconnection show\fP above for -the description of the <ID>-specifying keywords. \fI<new name>\fP is the name -of the new cloned connection. The new connection will be the exact copy except -the connection.id (\fI<new name>\fP) and connection.uuid (generated) -properties. -.br -The new connection profile will be saved as persistent unless \fI--temporary\fP -option is specified, in which case the new profile won't exist after NetworkManager -restart. -.TP -.B delete [ id | uuid | path ] <ID> ... -.br -Delete a configured connection. The connection to be deleted is identified by -its name, UUID or D-Bus path. If <ID> is ambiguous, a keyword \fIid\fP, -\fIuuid\fP or \fIpath\fP can be used. -.br -See \fBconnection show\fP above for the description of the <ID>-specifying keywords. -.br -If '--wait' option is not specified, the default timeout will be 10 seconds. -.TP -.B monitor [ id | uuid | path ] <ID> ... -.br -Monitor connection profile activity. This command prints a line whenever the -specified connection changes. The connection to be monitored is identified by -its name, UUID or D-Bus path. If <ID> is ambiguous, a keyword \fIid\fP, -\fIuuid\fP or \fIpath\fP can be used. -.br -See \fBconnection show\fP above for the description of the <ID>-specifying keywords. -.br -Monitors all connection profiles in case none is specified. The command terminates -when all monitored connections disappear. If you want to monitor connection creation -consider using the global monitor with \fInmcli monitor\fP command. -.TP -.B reload -.br -Reload all connection files from disk. \fINetworkManager\fP does not monitor -changes to connection files by default. So you need to use this command in order -to tell \fINetworkManager\fP to re-read the connection profiles from disk when -a change was made to them. However, the auto-loading feature can be enabled and -then \fINetworkManager\fP will reload connection files any time they change -(monitor-connection-files=true in \fINetworkManager.conf\fP(5)). -.TP -.B load <filename> [<filename>...] -.br -Load/reload one or more connection files from disk. Use this after manually -editing a connection file to ensure that \fBNetworkManager\fP is aware -of its latest state. -.TP -.B import [--temporary] type <type> file <file to import> -.br -Import an external/foreign configuration as a NetworkManager connection profile. -The type of the input file is specified by \fItype\fP option. -.br -Only VPN configurations are supported at the moment. The configuration -is imported by NetworkManager VPN plugins. \fItype\fP values are the same as for -\fIvpn-type\fP option in \fBnmcli connection add\fP. VPN configurations are -imported by VPN plugins. Therefore the proper VPN plugin has to be installed -so that nmcli could import the data. -.br -The imported connection profile will be saved as persistent unless \fI--temporary\fP -option is specified, in which case the new profile won't exist after NetworkManager -restart. -.TP -.B export [ id | uuid | path ] <ID> [<output file>] -.br -Export a connection. -.br -Only VPN connections are supported at the moment. A proper VPN plugin has to be -installed so that nmcli could export a connection. If no \fI<output file>\fP is -provided, the VPN configuration data will be printed to standard output. -.RE - -.TP -.B device - show and manage network interfaces -.br -.TP -.SS \fICOMMAND\fP := { status | show | set | connect | reapply | disconnect | delete | monitor | wifi | lldp } -.sp -.RS -.TP -.B status -.br -Print status of devices. -.br -This is the default action if no command is specified to \fIdevice\fP object. -.TP -.B show [<ifname>] -.br -Show detailed information about devices. Without an argument, all devices are -examined. To get information for a specific device, the interface name has -to be provided. -.TP -.TP -.B set [ifname] <ifname> [autoconnect yes|no] [managed yes|no] -.br -Set device properties. -.TP -.B connect <ifname> -.br -Connect the device. NetworkManager will try to find a suitable connection that -will be activated. It will also consider connections that are not set to auto connect. -.br -If '--wait' option is not specified, the default timeout will be 90 seconds. -.TP -.B reapply <ifname> -.br -Attempt to update device with changes to the currently active connection -made since it was last applied. -.TP -.B disconnect <ifname> ... -.br -Disconnect a device and prevent the device from automatically activating further -connections without user/manual intervention. Note that disconnecting software -devices may mean that the devices will disappear. -.br -If '--wait' option is not specified, the default timeout will be 10 seconds. -.TP -.B delete <ifname> ... -.br -Delete a device. The command removes the interface from the system. Note that -this only works for software devices like bonds, bridges, teams, etc. -Hardware devices (like Ethernet) cannot be deleted by the command. -.br -If '--wait' option is not specified, the default timeout will be 10 seconds. -.TP -.B monitor [<ifname>] ... -.br -Monitor device activity. This command prints a line whenever the specified devices -change state. -.br -Monitors all devices in case no interface is specified. The monitor terminates when -all specified devices disappear. If you want to monitor device addition consider -using the global monitor with \fInmcli monitor\fP command. -.TP -.B wifi [list [ifname <ifname>] [bssid <BSSID>]] -.br -List available Wi\(hyFi access points. The \fIifname\fP and \fIbssid\fP options -can be used to list APs for a particular interface or with a specific BSSID, -respectively. -.TP -.B wifi connect <(B)SSID> [password <password>] [wep\-key\-type key|phrase] [ifname <ifname>] [bssid <BSSID>] [name <name>] -.B [private yes|no] [hidden yes|no] -.br -Connect to a Wi\(hyFi network specified by SSID or BSSID. The command creates a new -connection and then activates it on a device. This is a command\(hyline counterpart -of clicking an SSID in a GUI client. The command always creates a new connection -and thus it is mainly useful for connecting to new Wi\(hyFi networks. If a connection -for the network already exists, it is better to bring up (activate) the existing connection -as follows: \fInmcli con up id <name>\fP. Note that only open, WEP and WPA\(hyPSK networks -are supported at the moment. It is also supposed that IP configuration is obtained via -DHCP. -.br -If '--wait' option is not specified, the default timeout will be 90 seconds. -.RS -.PP -Available options are: -.IP \fIpassword\fP 13 -\(en password for secured networks (WEP or WPA) -.IP \fIwep\-key\-type\fP 13 -\(en type of WEP secret, either \fIkey\fP for ASCII/HEX key or \fIphrase\fP for passphrase -.IP \fIifname\fP 13 -\(en interface that will be used for activation -.IP \fIbssid\fP 13 -\(en if specified, the created connection will be restricted just for the BSSID -.IP \fIname\fP 13 -\(en if specified, the connection will use the name (else NM creates a name itself) -.IP \fIprivate\fP 13 -\(en if set to \fByes\fP, the connection will only be visible to the user who created it. -Otherwise the connection is system\(hywide, which is the default. -.IP \fIhidden\fP 13 -\(en set to \fByes\fP when connecting for the first time to an AP not broadcasting its SSID. -Otherwise the SSID would not be found and the connection attempt would fail. -.RE -.TP -.B wifi hotspot [ifname <ifname>] [con-name <name>] [ssid <SSID>] [band a|bg] [channel <channel>] [password <password>] -.br -Create a Wi-Fi hotspot. The command creates a hotspot connection profile according to -Wi-Fi device capabilities and activates it on the device. The hotspot is secured with WPA -if device/driver supports that, otherwise WEP is used. -Use \fIconnection down\fP or \fIdevice disconnect\fP to stop the hotspot. -.br -.RS -.PP -Parameters of the hotspot can be influenced by the optional parameters: -.IP \fIifname\fP 17 -\(en what Wi-Fi device is used -.IP \fIcon-name\fP 17 -\(en name of the created hotspot connection profile -.IP \fIssid\fP 17 -\(en SSID of the hotspot -.IP \fIband\fP 17 -\(en Wi-Fi band to use -.IP \fIchannel\fP 17 -\(en Wi-Fi channel to use -.IP \fIpassword\fP 17 -\(en password to use for the created hotspot. If not provided, -nmcli will generate a password. The password is either WPA -pre-shared key or WEP key. -.PP -Note that \fI--show-secrets\fP global option can be used to print the hotspot -password. It is useful especially when the password was generated. -.RE -.TP -.B wifi rescan [ifname <ifname>] [[ssid <SSID>] ...] -.br -Request that \fINetworkManager\fP immediately re-scan for available access points. -NetworkManager scans Wi\(hyFi networks periodically, but in some cases it can be -useful to start scanning manually (e.g. after resuming the computer). By using -\fIssid\fP, it is possible to scan for a specific SSID, which is useful for APs -with hidden SSIDs. You can provide multiple \fIssid\fP parameters in order to -scan more SSIDs. -.br -This command does not show the APs, use 'nmcli device wifi list' for that. -.TP -.B lldp [list [ifname <ifname>]] -.br -Display information about neighboring devices learned through the Link -Layer Discovery Protocol (LLDP). The \fIifname\fP option can be used to -list neighbors only for a given interface. The protocol must be -enabled in the connection settings. -.RE - -.TP -.B agent \- run nmcli as a NetworkManager secret agent, or polkit agent -.br -.TP -.SS \fICOMMAND\fP := { secret | polkit | all } -.sp -.RS -.TP -.B secret -.br -Register nmcli as a NetworkManager secret agent and listen for secret requests. -You do usually not need this command, because nmcli can handle secrets when -connecting to networks. However, you may find the command useful when you use -another tool for activating connections and you do not have a secret agent -available (like nm-applet). -.TP -.B polkit -.br -Register nmcli as a polkit agent for the user session and listen for -authorization requests. You do not usually need this command, because nmcli can -handle polkit actions related to NetworkManager operations (when run with ---ask). However, you may find the command useful when you want to run a simple -text based polkit agent and you do not have an agent of a desktop environment. -Note that running this command makes nmcli handle all polkit requests, not only -NetworkManager related ones, because only one polkit agent can run for the -session. -.TP -.B all -.br -Runs nmcli as both NetworkManager secret and a polkit agent. -.RE - -.SH ENVIRONMENT VARIABLES -\fInmcli\fP's behavior is affected by the following environment variables. -.IP "LC_ALL" 13 -If set to a non\(hyempty string value, it overrides the values of all the other -internationalization variables. -.IP "LC_MESSAGES" 13 -Determines the locale to be used for internationalized messages. -.IP "LANG" 13 -Provides a default value for the internationalization variables that are unset -or null. - -.RE -Internationalization notes: -.br -Be aware that \fInmcli\fP is localized and that is why the output depends on -your environment. This is important to realize especially when you parse the -output. -.br -Call \fInmcli\fP as \fBLC_ALL=C nmcli\fP to be sure the locale is -set to "C" while executing in a script. - -\fBLC_ALL\fP, \fBLC_MESSAGES\fP, \fBLANG\fP variables specify the LC_MESSAGES -locale category (in that order), which determines the language that \fInmcli\fP -uses for messages. The "C" locale is used if none of these variables are set, -and this locale uses English messages. - -.SH EXIT STATUS -\fInmcli\fP exits with status 0 if it succeeds, a value greater than 0 is -returned if an error occurs. -.IP "0" 4 -Success \(en indicates the operation succeeded -.IP "1" 4 -Unknown or unspecified error -.IP "2" 4 -Invalid user input, wrong \fInmcli\fP invocation -.IP "3" 4 -Timeout expired (see \fI\-\-wait\fP option) -.IP "4" 4 -Connection activation failed -.IP "5" 4 -Connection deactivation failed -.IP "6" 4 -Disconnecting device failed -.IP "7" 4 -Connection deletion failed -.IP "8" 4 -NetworkManager is not running -.IP "9" 4 -\fInmcli\fP and \fINetworkManager\fP versions mismatch -.IP "10" 4 -Connection, device, or access point does not exist. - -.SH EXAMPLES -.PP -This section presents various examples of nmcli usage. If you want even more, -please refer to \fInmcli-examples\fP(5) manual page. -.sp -.IP "\fB\f(CWnmcli \-t \-f RUNNING general\fP\fP" -.IP -tells you whether NetworkManager is running or not. - -.IP "\fB\f(CWnmcli \-t \-f STATE general\fP\fP" -.IP -shows the overall status of NetworkManager. - -.IP "\fB\f(CWnmcli radio wifi off\fP\fP" -.IP -switches Wi\(hyFi off. - -.IP "\fB\f(CWnmcli connection show\fP\fP" -.IP -lists all connections NetworkManager has. - -.IP "\fB\f(CWnmcli \-p \-m multiline \-f all con show\fP\fP" -.IP -shows all configured connections in multi-line mode. - -.IP "\fB\f(CWnmcli connection show --active\fP\fP" -.IP -lists all currently active connections. - -.IP "\fB\f(CWnmcli \-f name,autoconnect c s\fP\fP" -.IP -shows all connection profile names and their auto-connect property. - -.IP "\fB\f(CWnmcli \-p connection show \(dq\&My default em1\(dq\&\fP\fP" -.IP -shows details for "My default em1" connection profile. - -.IP "\fB\f(CWnmcli --show-secrets connection show \(dq\&My Home WiFi\(dq\&\fP\fP" -.IP -shows details for "My Home WiFi" connection profile with all passwords. -Without \fI--show-secrets\fP option, secrets would not be displayed. - -.IP "\fB\f(CWnmcli \-f active connection show \(dq\&My default em1\(dq\&\fP\fP" -.IP -shows details for "My default em1" active connection, like IP, DHCP -information, etc. - -.IP "\fB\f(CWnmcli -f profile con s \(dq\&My wired connection\(dq\&\fP\fP" -.IP -shows static configuration details of the connection profile with "My wired connection" name. - -.IP "\fB\f(CWnmcli \-p con up \(dq\&My wired connection\(dq\& ifname eth0\fP\fP" -.IP -activates the connection profile with name "My wired connection" on interface eth0. -The \-p option makes nmcli show progress of the activation. - -.IP "\fB\f(CWnmcli con up 6b028a27\-6dc9\-4411\-9886\-e9ad1dd43761 ap 00:3A:98:7C:42:D3\fP\fP" -.IP -connects the Wi\(hyFi connection with UUID 6b028a27\-6dc9\-4411\-9886\-e9ad1dd43761 to the AP -with BSSID 00:3A:98:7C:42:D3. - -.IP "\fB\f(CWnmcli device status\fP\fP" -.IP -shows the status for all devices. - -.IP "\fB\f(CWnmcli dev disconnect em2\fP\fP" -.IP -disconnects a connection on interface em2 and marks the device as unavailable for -auto\(hyconnecting. As a result, no connection will automatically be activated on the -device until the device's 'autoconnect' is set to TRUE or the user manually activates -a connection. - -.IP "\fB\f(CWnmcli \-f GENERAL,WIFI\-PROPERTIES dev show wlan0\fP\fP" -.IP -shows details for wlan0 interface; only GENERAL and WIFI\-PROPERTIES sections will be shown. - -.IP "\fB\f(CWnmcli \-f CONNECTIONS device show wlp3s0\fP\fP" -.IP -shows all available connection profiles for your Wi-Fi interface wlp3s0. - -.IP "\fB\f(CWnmcli dev wifi\fP\fP" -.IP -lists available Wi\(hyFi access points known to NetworkManager. - -.IP "\fB\f(CWnmcli dev wifi con \(dq\&Cafe Hotspot 1\(dq\& password caffeine name \(dq\&My cafe\(dq\&\fP\fP" -.IP -creates a new connection named "My cafe" and then connects it to "Cafe Hotspot 1" SSID -using password "caffeine". This is mainly useful when connecting to "Cafe Hotspot 1" for -the first time. Next time, it is better to use 'nmcli con up id "My cafe"' so that the -existing connection profile can be used and no additional is created. - -.IP "\fB\f(CWnmcli -s dev wifi hotspot con-name QuickHotspot\fP\fP" -.IP -creates a hotspot profile and connects it. Prints the hotspot password the user should use -to connect to the hotspot from other devices. - -.IP "\fB\f(CWnmcli connection add type ethernet autoconnect no ifname eth0\fP\fP" -.IP -non-interactively adds an Ethernet connection tied to eth0 interface with automatic IP configuration (DHCP), -and disables the connection's "autoconnect" flag. - -.IP "\fB\f(CWnmcli c a ifname Maxipes\(hyfik type vlan dev eth0 id 55\fP\fP" -.IP -non-interactively adds a VLAN connection with ID 55. The connection will use eth0 and the VLAN interface -will be named Maxipes\(hyfik. - -.IP "\fB\f(CWnmcli c a ifname eth0 type ethernet -- ipv4.method disabled ipv6.method link-local\fP\fP" -.IP -non-interactively adds a connection that will use eth0 Ethernet interface and only have an IPv6 link-local -address configured. - -.IP "\fB\f(CWnmcli connection edit ethernet\-em1\-2\fP\fP" -.IP -edits existing "ethernet\(hyem1\(hy2" connection in the interactive editor. - -.IP "\fB\f(CWnmcli connection edit type ethernet con-name \(dq\&yet another Ethernet connection\(dq\&\fP\fP" -.IP -adds a new Ethernet connection in the interactive editor. - -.IP "\fB\f(CWnmcli con mod ethernet\-2 connection.autoconnect no\fP\fP" -.IP -modifies 'autoconnect' property in the 'connection' setting of 'ethernet\(hy2' connection. - -.IP "\fB\f(CWnmcli con mod \(dq\&Home Wi\-Fi\(dq\& wifi.mtu 1350\fP\fP" -.IP -modifies 'mtu' property in the 'wifi' setting of 'Home Wi\(hyFi' connection. - -.IP "\fB\f(CWnmcli con mod em1-1 ipv4.method manual ipv4.addr \(dq\&192.168.1.23/24 192.168.1.1, 10.10.1.5/8, 10.0.0.11\(dq\&\fP\fP" -.IP -sets manual addressing and the addresses in em1-1 profile. - -.IP "\fB\f(CWnmcli con modify ABC +ipv4.dns 8.8.8.8\fP\fP" -.IP -appends a Google public DNS server to DNS servers in ABC profile. - -.IP "\fB\f(CWnmcli con modify ABC -ipv4.addresses \(dq\&192.168.100.25/24 192.168.1.1\(dq\&\fP\fP" -.IP -removes the specified IP address from (static) profile ABC. - -.IP "\fB\f(CWnmcli con import type openvpn file ~/Downloads/frootvpn.ovpn\fP\fP" -.IP -imports an OpenVPN configuration to NetworkManager. - -.IP "\fB\f(CWnmcli con export corp-vpnc /home/joe/corpvpn.conf\fP\fP" -.IP -exports NetworkManager VPN profile corp-vpnc as standard Cisco (vpnc) configuration. - -.SH NOTES -\fInmcli\fP accepts abbreviations, as long as they are a unique prefix in the set -of possible options. As new options get added, these abbreviations are not guaranteed -to stay unique. For scripting and long term compatibility it is therefore strongly -advised to spell out the full option names. - -.SH BUGS -There are probably some bugs. If you find a bug, please report it to -https://bugzilla.gnome.org/ \(em product \fINetworkManager\fP. - -.SH SEE ALSO -.BR nmcli\-examples (5), -.BR nm\-online (1), -.BR NetworkManager (8), -.BR NetworkManager.conf (5), -.BR nm\-settings (5), -.BR nm\-applet (1), -.BR nm\-connection\-editor (1). |