diff options
Diffstat (limited to 'libnm/nm-ifcfg-rh-docs.xml')
| -rw-r--r-- | libnm/nm-ifcfg-rh-docs.xml | 21 |
1 files changed, 19 insertions, 2 deletions
diff --git a/libnm/nm-ifcfg-rh-docs.xml b/libnm/nm-ifcfg-rh-docs.xml index 2cea2cb2..56c3c7b9 100644 --- a/libnm/nm-ifcfg-rh-docs.xml +++ b/libnm/nm-ifcfg-rh-docs.xml @@ -62,6 +62,7 @@ MACADDR for bridges is an NM extension."/> <property name="hello-time" variable="BRIDGING_OPTS: hello_time=" format="" values="1 - 10" default="2" example="" description="STP hello time."/> <property name="max-age" variable="BRIDGING_OPTS: max_age=" format="" values="6 - 40" default="20" example="" description="STP maximum message age."/> <property name="ageing-time" variable="BRIDGING_OPTS: ageing_time=" format="" values="0 - 1000000" default="300" example="" description="Ethernet MAC ageing time."/> +<property name="multicast-snooping" variable="BRIDGING_OPTS: multicast_snooping=" format="" values="0 or 1" default="1" example="" description="IGMP snooping support."/> </setting> <setting name="cdma"> </setting> @@ -93,6 +94,7 @@ together with this connection."/> <property name="gateway-ping-timeout" variable="GATEWAY_PING_TIMEOUT(+)" format="" values="" default="0" example="GATEWAY_PING_TIMEOUT=5" description="If greater than zero, the IP connectivity will be checked by pinging the gateway and waiting for the specified timeout (in seconds)."/> <property name="metered" variable="CONNECTION_METERED" format="" values="yes,no,unknown" default="" example="CONNECTION_METERED=yes" description="Whether the device is metered"/> +<property name="lldp" variable="LLDP" format="" values="boolean value or 'rx'" default="missing variable means global default" example="LLDP=no" description="whether LLDP is enabled for the connection"/> </setting> <setting name="dcb"> <property name="app-fcoe-flags" variable="DCB_APP_FCOE_ENABLE, DCB_APP_FCOE_ADVERTISE, DCB_APP_FCOE_WILLING" format="" values="" default="no" example="DCB_APP_FCOE_ENABLE=yes DCB_APP_FCOE_ADVERTISE=yes" description="FCOE flags."/> @@ -132,6 +134,8 @@ When PKEY_ID is specified, PHYSDEV and DEVICE also must be specified."/> </setting> <setting name=""> </setting> +<setting name="ip-tunnel"> +</setting> <setting name="ipv4"> <property name="method" variable="BOOTPROTO" format="string" values="none, dhcp (bootp), static, ibft, autoip, shared" default="none" example="" description="Method used for IPv4 protocol configuration."/> <property name="dns" variable="DNS1, DNS2, ..." format="string" values="" default="" example="DNS1=1.2.3.4 DNS2=10.0.0.254 DNS3=8.8.8.8" description="List of DNS servers. Even if NetworkManager supports many DNS @@ -144,7 +148,8 @@ but in route-* file instead."/> <property name="ignore-auto-routes" variable="PEERROUTES(+)" format="" values="" default="yes" example="" description="PEERROUTES has the opposite meaning as 'ignore-auto-routes' property."/> <property name="ignore-auto-dns" variable="PEERDNS" format="" values="" default="yes" example="" description="PEERDNS has the opposite meaning as 'ignore-auto-dns' property."/> <property name="dhcp-send-hostname" variable="DHCP_SEND_HOSTNAME(+)" format="" values="" default="yes" example="" description="Whether DHCP_HOSTNAME should be sent to the DHCP server."/> -<property name="dhcp-hostname" variable="DHCP_HOSTNAME" format="" values="" default="" example="" description="Hostname to send to the DHCP server."/> +<property name="dhcp-hostname" variable="DHCP_HOSTNAME" format="" values="" default="" example="" description="Hostname to send to the DHCP server. When both DHCP_HOSTNAME and +DHCP_FQDN are specified only the latter is used."/> <property name="never-default" variable="DEFROUTE (GATEWAYDEV in /etc/sysconfig/network)" format="" values="" default="yes" example="" description="DEFROUTE=no tells NetworkManager that this connection should not be assigned the default route. DEFROUTE has the opposite meaning as 'never-default' property."/> @@ -152,6 +157,9 @@ meaning as 'never-default' property."/> <property name="route-metric" variable="IPV4_ROUTE_METRIC(+)" format="" values="" default="-1" example="" description="IPV4_ROUTE_METRIC is the default IPv4 metric for routes on this connection. If set to -1, a default metric based on the device type is used."/> <property name="dhcp-client-id" variable="DHCP_CLIENT_ID(+)" format="" values="" default="" example="DHCP_CLIENT_ID=ax-srv-1" description="A string sent to the DHCP server to identify the local machine."/> +<property name="dhcp-timeout" variable="DHCP_TIMEOUT(+)" format="" values="" default="" example="DHCP_TIMEOUT=10" description="A timeout after which the DHCP transaction fails in case of no response."/> +<property name="dhcp-fqdn" variable="DHCP_FQDN" format="" values="" default="" example="DHCP_FQDN=foo.bar.com" description="FQDN to send to the DHCP server. When both DHCP_HOSTNAME and +DHCP_FQDN are specified only the latter is used."/> </setting> <setting name="ipv6"> <property name="method" variable="IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C" format="" values="" default="IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no" example="" description="Method used for IPv6 protocol configuration. @@ -175,6 +183,9 @@ meaning as 'never-default' property."/> If set to -1, a default metric based on the device type is used."/> <property name="ip6-privacy" variable="IPV6_PRIVACY, IPV6_PRIVACY_PREFER_PUBLIC_IP(+)" format="" values="IPV6_PRIVACY: no, yes (rfc3041 or rfc4941); IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no" default="no" example="IPV6_PRIVACY=rfc3041 IPV6_PRIVACY_PREFER_PUBLIC_IP=yes" description="Configure IPv6 Privacy Extensions for SLAAC (RFC4941)."/> +<property name="addr-gen-mode" variable="IPV6_ADDR_GEN_MODE" format="" values="IPV6_ADDR_GEN_MODE: eui64, stable-privacy" default="eui64" example="IPV6_ADDR_GEN_MODE=stable-privacy" description="Configure IPv6 Stable Privacy addressing for SLAAC (RFC7217)."/> +</setting> +<setting name="macvlan"> </setting> <setting name="802-11-olpc-mesh"> </setting> @@ -190,10 +201,12 @@ IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no" default="no" example="IPV6_PRIVACY=rfc30 <setting name="team"> <property name="config" variable="TEAM_CONFIG" format="" values="" default="" example="" description="Team configuration in JSON. See man teamd.conf for details."/> </setting> +<setting name="tun"> +</setting> <setting name="vlan"> <property name="parent" variable="DEVICE or PHYSDEV" format="" values="" default="" example="" description="Parent interface of the VLAN."/> <property name="id" variable="VLAN_ID or DEVICE" format="" values="" default="" example="" description="VLAN identifier."/> -<property name="flags" variable="VLAN_FLAGS, REORDER_HDR" format="" values=""GVRP", "LOOSE_BINDING" for VLAN_FLAGS; 0 or 1 for REORDER_HDR" default="" example="" description="VLAN flags."/> +<property name="flags" variable="REORDER_HDR, GVRP, MVRP, VLAN_FLAGS" format="" values=""yes or "no" for REORDER_HDR, GVRP and MVRP; "LOOSE_BINDING" for VLAN_FLAGS" default="" example="" description="VLAN flags."/> <property name="ingress-priority-map" variable="VLAN_INGRESS_PRIORITY_MAP" format="" values="" default="" example="VLAN_INGRESS_PRIORITY_MAP=4:2,3:5" description="Ingress priority mapping."/> <property name="egress-priority-map" variable="VLAN_EGRESS_PRIORITY_MAP" format="" values="" default="" example="VLAN_EGRESS_PRIORITY_MAP=5:4,4:1,3:7" description="Egress priority mapping."/> <property name="interface-name" variable="PHYSDEV and VLAN_ID, or DEVICE" format="" values="" default="" example="PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12" description="VLAN interface name. @@ -202,6 +215,8 @@ but VLAN id from DEVICE takes precedence over VLAN_ID."/> </setting> <setting name="vpn"> </setting> +<setting name="vxlan"> +</setting> <setting name="wimax"> </setting> <setting name="802-3-ethernet"> @@ -265,6 +280,8 @@ is listed."/> <property name="seen-bssids" variable="(none)" format="" values="" default="" example="" description="This property is not handled by ifcfg-rh plugin."/> <property name="mtu" variable="MTU" format="" values="" default="" example="" description="MTU of the wireless interface."/> <property name="hidden" variable="SSID_HIDDEN(+)" format="" values="" default="" example="" description="Whether the network hides the SSID."/> +<property name="powersave" variable="POWERSAVE(+)" format="" values="" default="no" example="POWERSAVE=yes" description="Enables or disables Wi-Fi power saving."/> +<property name="mac-address-randomization" variable="MAC_ADDRESS_RANDOMIZATION(+)" format="" values="0 (default), (1) never, (2) always" default="1" example="MAC_ADDRESS_RANDOMIZATION=2" description="Enables or disables Wi-Fi MAC address randomization."/> <property name="security" variable="(none)" format="" values="" default="" example="" description="This property is deprecated and not handled by ifcfg-rh-plugin."/> </setting> </nm-ifcfg-rh-docs> \ No newline at end of file |