New upstream version 1.11.3 upstream/1.11.3

6 files changed, 0 insertions, 1520 deletions

diff --git a/src/settings/plugins/ifnet/tests/net b/src/settings/plugins/ifnet/tests/net
deleted file mode 100644
index a5ac9ca2..00000000
--- a/src/settings/plugins/ifnet/tests/net
+++ /dev/null
@@ -1,158 +0,0 @@
-# This blank configuration will automatically use DHCP for any net.*
-# scripts in /etc/init.d.  To create a more complete configuration,
-# please review /etc/conf.d/net.example and save your configuration
-# in /etc/conf.d/net (this file :]!).
-
-modules="!wpa_supplicant"
-
-config_eth0=(
-"202.117.16.121    netmask    255.255.255.0 brd 202.117.16.255"
-"192.168.4.121/24"
-"dhcp6"
-)
-routes_eth0=( "default via     202.117.16.1" 
-		"192.168.4.0/24 via 192.168.4.1")
-dns_servers_eth0="202.117.0.20    202.117.0.21"
-dns_search_eth0="p12.edu.cn p13.edu.cn"
-
-config_eth1=(
-	"dhcp"
-)
-enable_ipv6_eth1="true"
-routes_eth1=( "default via 202.117.16.1" )
-dns_servers_eth1="202.117.0.20 202.117.0.21"
-config_eth2=(
-"202.117.16.1211    netmask    255.255.255.0 brd 202.117.16.255"
-"192.168.4.121/24"
-"4321:0:1:2:3:4:567:89ab/64"
-)
-routes_eth2=("default via  4321:0:1:2:3:4:567:89ab")
-enable_ipv6_eth2="true"
-config_eth3=("nufjlsjlll")
-managed_eth4="false"
-routes_eth4=("default via 4321:0:1:2:3:4:567:89ab")
-config_eth5=("dhcp")
-
-config_eth7=( "dhcp" )
-auto_eth7="true"
-
-# missing config_eth8
-auto_eth8="true"
-
-#new openrc style
-config_eth9="202.117.16.10/24 202.117.17.10/24"
-routes_eth9="default via 202.117.16.1
-10.0.0.0/8 via 192.168.0.1
-"
-config_eth10="202.117.16.2 netmask 255.255.255.0"
-routes_eth10="10.0.0.0/8 via 192.168.0.1"
-
-config_myxjtu2=("202.117.16.121/24 brd 202.117.16.255")
-routes_myxjtu2=("default via 202.117.16.1")
-dns_servers_myxjtu2="202.117.0.20 202.117.0.21"
-#key_myxjtu2="[1] s:xjtud key [1] enc restricted"
-#key_eth6="[1] aaaa-4444-3d [2] s:xjtudlc key [1] enc open"
-
-
-username_ppp0='user'
-password_ppp0='password'
-
-config_qiaomuf=("dhcp")
-
-config_1xtest=("dhcp")
-
-config_0xab3ace=("dhcp")
-
-modules=( "iproute2" )
-	config_kvm0=( "null" )
-	config_kvm1=( "null" )
-
-	tuntap_kvm0="tap"
-	tuntap_kvm1="tap"
-	tunctl_kvm0="-u user"
-	tunctl_kvm1="-u user"
-
-bridge_br0="eth0 kvm0 kvm1"
-config_br0=( "192.168.1.10/24" )
-	brctl_br0=( "setfd 0")
-	dhcp_eth1="nosendhost nontp -I"
-
-predown() {
-	# The default in the script is to test for NFS root and disallow
-	# downing interfaces in that case.  Note that if you specify a
-	# predown() function you will override that logic.  Here it is, in
-	# case you still want it...
-	if is_net_fs /; then
-		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-		return 1
-	fi
-
-	# Remember to return 0 on success
-	return 0
-}
-
-postup() {
-	# This function could be used, for example, to register with a
-	# dynamic DNS service.  Another possibility would be to
-	# send/receive mail once the interface is brought up.
-
-	# Here is an example that allows the use of iproute rules
-	# which have been configured using the rules_eth0 variable.
-	#rules_eth0=" \
-	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
-	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
-	#"
-	eval set -- \$rules_${IFVAR}
-	if [ $# != 0 ]; then
-		einfo "Adding IP policy routing rules"
-		eindent
-		# Ensure that the kernel supports policy routing
-		if ! ip rule list | grep -q "^"; then
-			eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-			eerror "in your kernel to use ip rules"
-		else
-			for x; do
-				ebegin "${x}"
-				ip rule add ${x}
-				eend $?
-			done
-		fi
-		eoutdent
-		# Flush the cache
-		ip route flush cache dev "${IFACE}"
-	fi
-
-}
-
-postdown() {
-	# Enable Wake-On-LAN for every interface except for lo
-	# Probably a good idea to set ifdown="no" in /etc/conf.d/net
-	# as well ;)
-	[ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
-
-	Automatically erase any ip rules created in the example postup above
-	if interface_exists "${IFACE}"; then
-		# Remove any rules for this interface
-		local rule
-		ip rule list | grep " iif ${IFACE}[ ]*" | {
-			while read rule; do
-				rule="${rule#*:}"	
-				ip rule del ${rule}
-			done
-		}
-		# Flush the route cache
-		ip route flush cache dev "${IFACE}"
-	fi
-
-	# Return 0 always
-	return 0
-}
-
-failup() {
-       # This function is mostly here for completeness... I haven't
-       # thought of anything nifty to do with it yet ;-)
-}
-
-faildown() 
-{}
-
diff --git a/src/settings/plugins/ifnet/tests/net.all b/src/settings/plugins/ifnet/tests/net.all
deleted file mode 100644
index 285a4cdf..00000000
--- a/src/settings/plugins/ifnet/tests/net.all
+++ /dev/null
@@ -1,864 +0,0 @@
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatability with existing ones.
-# 
-# Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-# Prefer ifconfig over iproute2
-modules=( "ifconfig" )
-
-# You can also specify other modules for an interface
-# In this case we prefer udhcpc over dhcpcd
-modules_eth0=( "udhcpc" )
-
-# You can also specify which modules not to use - for example you may be
-# using a supplicant or linux-wlan-ng to control wireless configuration but
-# you still want to configure network settings per ESSID associated with.
-modules=( "!iwconfig" "!wpa_supplicant" )
-# IMPORTANT: If you need the above, please disable modules in that order
-
-
-##############################################################################
-# INTERFACE HANDLERS
-# 
-# We provide two interface handlers presently: ifconfig and iproute2.
-# You need one of these to do any kind of network configuration.
-# For ifconfig support, emerge sys-apps/net-tools
-# For iproute2 support, emerge sys-apps/iproute2
-
-# If you don't specify an interface then we prefer iproute2 if it's installed
-# To prefer ifconfig over iproute2
-modules=( "ifconfig" )
-
-# For a static configuration, use something like this
-# (They all do exactly the same thing btw)
-config_eth0=( "192.168.0.2/24" )
-config_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-
-# We can also specify a broadcast
-config_eth0=( "192.168.0.2/24 brd 192.168.0.255" )
-config_eth0=( "192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" )
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-#       (eth0:1, eth0:2, etc)
-#       iproute2 does not do this as there is no need to
-config_eth0=(
-	"192.168.0.2/24"
-	"192.168.0.3/24"
-	"192.168.0.4/24"
-)
-# Or you can use sequence expressions
-config_eth0=( "192.168.0.{2..4}/24" )
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-config_eth0=(
-	"192.168.0.2/24"
-	"4321:0:1:2:3:4:567:89ab/64"
-	"4321:0:1:2:3:4:567:89ac/64"
-)
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-config_eth0=( "noop" "192.168.0.2/24" )
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-config_eth0=( "null" )
-
-# Here's how to do routing if you need it
-routes_eth0=(
-	"default via 192.168.0.1"		# IPv4 default route
-	"10.0.0.0/8 via 192.168.0.1"		# IPv4 subnet route
-	"::/0"					# IPv6 unicast
-)
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-fallback_eth0=( "192.168.0.2 netmask 255.255.255.0" )
-fallback_route_eth0=( "default via 192.168.0.1" )
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-
-# Some users may need to alter the MTU - here's how
-mtu_eth0="1500"
-
-# Each module described below can set a default base metric, lower is
-# preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
-metric_eth0="100"
-# or on a global basis
-metric="100"
-# The only downside of the global setting is that you have to ensure that
-# there are no conflicting routes yourself. For users with large routing
-# tables you may have to set a global metric as the due to a simple read of
-# the routing table taking over a minute at a time.
-
-##############################################################################
-# OPTIONAL MODULES
-
-# INTERFACE RENAMING
-# There is no consistent device renaming scheme for Linux.
-# The preferred way of naming devices is via the kernel module directly or
-# by using udev (http://www.reactivated.net/udevrules.php)
-
-# If you are unable to write udev rules, then we do provide a way of renaming
-# the interface based on it's MAC address, but it is not optimal.
-# Here is how to rename an interface whose MAC address is 00:11:22:33:44:55
-# to foo1
-rename_001122334455="foo1"
-
-# You can also do this based on current device name - although this is not
-# recommended. Here we rename eth1 to foo2.
-rename_eth1="foo2"
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by iwconfig or wpa_supplicant
-
-# iwconfig
-# emerge net-wireless/wireless-tools
-# Wireless options are held in /etc/conf.d/wireless - but could be here too
-# Consult the sample file /etc/conf.d/wireless.example for instructions
-# iwconfig is the default
-
-# wpa_supplicant
-# emerge net-wireless/wpa-supplicant
-# Wireless options are held in /etc/wpa_supplicant.conf
-# Consult the sample file /etc/wpa_supplicant.conf.example for instructions
-# To choose wpa_supplicant over iwconfig
-modules=( "wpa_supplicant" )
-# To configure wpa_supplicant
-wpa_supplicant_eth0="-Dwext" # For generic wireless
-wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
-# Consult wpa_supplicant for more drivers
-# By default don't wait for wpa_suppliant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# GENERIC WIRELESS OPTIONS
-# PLEASE READ THE INSTRUCTIONS IN /etc/conf.d/wireless.example FOR
-# HOW TO USE THIS ESSID VARIABLE
-# You can also override any settings found here per ESSID - which is very
-# handy if you use different networks a lot
-config_ESSID=( "dhcp" )
-dhcpcd_ESSID="-t 5"
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
- set dhcp_ESSID="nodns"
-dns_servers_ESSID=( "192.168.0.1" "192.168.0.2" )
-dns_domain_ESSID="some.domain"
-dns_search_ESSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search are mutually exclusive.
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same ESSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-mac_config_001122334455=( "dhcp" )
-mac_dhcpcd_001122334455="-t 10"
-mac_dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
-
-# When an interface has been associated with an Access Point, a global
-# variable called ESSID is set to the Access Point's ESSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed any of the above packages, you need to disable them
-modules=( "!iwconfig" "!wpa_supplicant" )
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient, dhcpcd, pump or udhcpc.
-#
-# dhclient: emerge net-misc/dhcp
-# dhcpcd:   emerge net-misc/dhcpcd
-# pump:     emerge net-misc/pump
-# udhcpc:   emerge net-misc/udhcp
-
-# If you have more than one DHCP client installed, you need to specify which
-# one to use - otherwise we default to dhcpcd if available.
-modules=( "dhclient" ) # to select dhclient over dhcpcd
-#
-# Notes:
-# - All clients send the current hostname to the DHCP server by default
-# - dhcpcd does not daemonize when the lease time is infinite
-# - udhcp-0.9.3-r3 and earlier do not support getting NTP servers 
-# - pump does not support getting NIS servers
-# - DHCP tends to erase any existing device information - so add
-#   static addresses after dhcp if you need them
-# - dhclient and udhcpc can set other resolv.conf options such as "option"
-#   and "sortlist"- see the System module for more details
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-config_eth0=( "dhcp" )
-
-# For passing custom options to dhcpcd use something like the following.  This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-dhcpcd_eth0="-t 10"
-
-# dhclient, udhcpc and pump don't have many runtime options
-# You can pass options to them in a similar manner to dhcpcd though
-dhclient_eth0="..."
-udhcpc_eth0="..."
-pump_eth0="..."
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release it's lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-#-----------------------------------------------------------------------------
-# For APIPA support, emerge net-misc/iputils or net-analyzer/arping
-
-# APIPA is a module that tries to find a free address in the range
-# 169.254.0.0-169.254.255.255 by arping a random address in that range on the
-# interface. If no reply is found then we assign that address to the interface
-
-# This is only useful for LANs where there is no DHCP server and you don't
-# connect directly to the internet.
-config_eth0=( "dhcp" )
-fallback_eth0=( "apipa" )
-
-#-----------------------------------------------------------------------------
-# ARPING Gateway configuration 
-# and
-# Automatic Private IP Addressing (APIPA)
-# For arpingnet / apipa support, emerge net-misc/iputils or net-analyzer/arping
-#
-# This is a module that tries to find a gateway IP. If it exists then we use
-# that gateways configuration for our own. For the configuration variables
-# simply ensure that each octet is zero padded and the dots are removed.
-# Below is an example.
-#
-gateways_eth0="192.168.0.1 10.0.0.1"
-config_192168000001=( "192.168.0.2/24" )
-routes_192168000001=( "default via 192.168.0.1" )
-dns_servers_192168000001=( "192.168.0.1" )
-config_010000000001=( "10.0.0.254/8" )
-routes_010000000001=( "default via 10.0.0.1" )
-dns_servers_010000000001=( "10.0.0.1" )
-
-# We can also specify a specific MAC address for each gateway if different
-# networks have the same gateway.
-gateways_eth0="192.168.0.1,00:11:22:AA:BB:CC 10.0.0.1,33:44:55:DD:EE:FF"
-config_192168000001_001122AABBCC=( "192.168.0.2/24" )
-routes_192168000001_001122AABBCC=( "default via 192.168.0.1" )
-dns_servers_192168000001_001122AABBCC=( "192.168.0.1" )
-config_010000000001_334455DDEEFF=( "10.0.0.254/8" )
-routes_010000000001_334455DDEEFF=( "default via 10.0.0.1" )
-dns_servers_010000000001_334455DDEEFF=( "10.0.0.1" )
-
-# If we don't find any gateways (or there are none configured) then we try and
-# use APIPA to find a free address in the range 169.254.0.0-169.254.255.255
-# by arping a random address in that range on the interface. If no reply is
-# found then we assign that address to the interface.
-
-# This is only useful for LANs where there is no DHCP server.
-config_eth0=( "arping" )
-
-# or if no DHCP server can be found
-config_eth0=( "dhcp" )
-fallback_eth0=( "arping" )
-
-# NOTE: We default to sleeping for 1 second the first time we attempt an
-# arping to give the interface time to settle on the LAN. This appears to
-# be a good default for most instances, but if not you can alter it here.
-arping_sleep=5
-arping_sleep_lan=7
-
-# NOTE: We default to waiting 3 seconds to get an arping response. You can
-# change the default wait like so.
-arping_wait=3
-arping_wait_lan=2
-
-#-----------------------------------------------------------------------------
-# VLAN (802.1q support)
-# For VLAN support, emerge net-misc/vconfig
-
-# Specify the VLAN numbers for the interface like so
-# Please ensure your VLAN IDs are NOT zero-padded
-vlans_eth0="1 2"
-
-# You may not want to assign an IP to the physical interface, but we still
-# need it up.
-config_eth0=( "null" )
-
-# You can also configure the VLAN - see for vconfig man page for more details
-vconfig_eth0=( "set_name_type VLAN_PLUS_VID_NO_PAD" )
-vconfig_vlan1=( "set_flag 1" "set_egress_map 2 6" )
-config_vlan1=( "172.16.3.1 netmask 255.255.254.0" )
-config_vlan2=( "172.16.2.1 netmask 255.255.254.0" )
-
-# NOTE: Vlans can be configured with a . in their interface names
-# When configuring vlans with this name type, you need to replace . with a _
-config_eth0.1=( "dhcp" ) - does not work
-config_eth0_1=( "dhcp" ) - does work
-
-# NOTE: Vlans are controlled by their physical interface and not per vlan
-# This means you do not need to create init scripts in /etc/init.d for each
-# vlan, you must need to create one for the physical interface.
-# If you wish to control the configuration of each vlan through a separate
-# script, or wish to rename the vlan interface to something that vconfig
-# cannot then you need to do this.
-vlan_start_eth0="no"
-
-# If you do the above then you may want to depend on eth0 like so
- RC_NEED_vlan1="net.eth0"
-# NOTE: depend functions only work in /etc/conf.d/net
-# and not in profile configs such as /etc/conf.d/net.foo
-
-#-----------------------------------------------------------------------------
-# Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
-
-# To bond interfaces together
-slaves_bond0="eth0 eth1 eth2"
-config_bond0=( "null" ) # You may not want to assign an IP to the bond
-
-# If any of the slaves require extra configuration - for example wireless or
-# ppp devices - we need to depend function on the bonded interfaces
-RC_NEED_bond0="net.eth0 net.eth1"
-
-
-#-----------------------------------------------------------------------------
-# Classical IP over ATM 
-# For CLIP support emerge net-dialup/linux-atm
-
-# Ensure that you have /etc/atmsigd.conf setup correctly
-# Now setup each clip interface like so
-clip_atm0=( "peer_ip [if.]vpi.vci [opts]" ... )
-#  where "peer_ip" is the IP address of a PVC peer (in case of an ATM connection
-#  with your ISP, your only peer is usually the ISP gateway closest to you),
-#  "if" is the number of the ATM interface which will carry the PVC, "vpi.vci"
-#  is the ATM VC address, and "opts" may optionally specify VC parameters like
-#  qos, pcr, and the like (see "atmarp -s" for further reference). Please also
-#  note quoting: it is meant to distinguish the VCs you want to create. You may,
-#  in example, create an atm0 interface to more peers, like this:
-clip_atm0=( "1.1.1.254 0.8.35" "1.1.1.253 1.8.35" )
-
-#  By default, the PVC will use the LLC/SNAP encapsulation. If you rather need a
-#  null encapsulation (aka "VC mode"), please add the keyword "null" to opts.
-
-
-#-----------------------------------------------------------------------------
-# PPP
-# For PPP support, emerge net-dialup/ppp
-# PPP is used for most dialup connections, including ADSL.
-# The older ADSL module is documented below, but you are encouraged to try
-# this module first.
-#
-# You need to create the PPP net script yourself. Make it like so
-#ln -s net.lo /etc/init.d/net.ppp0
-#
-# We have to instruct ppp0 to actually use ppp
-config_ppp0=( "ppp" )
-#
-# Each PPP interface requires an interface to use as a "Link"
-link_ppp0="/dev/ttyS0" 		# Most PPP links will use a serial port
-link_ppp0="eth0"       		# PPPoE requires an ethernet interface
-link_ppp0="[itf.]vpi.vci"		# PPPoA requires the ATM VC's address
-link_ppp0="/dev/null"			# ISDN links should have this
-link_ppp0="pty 'your_link_command'"	# PPP links over ssh, rsh, etc
-#
-# Here you should specify what pppd plugins you want to use
-# Available plugins are: pppoe, pppoa, capi, dhcpc, minconn, radius,
-#			 radattr, radrealms and winbind 
-plugins_ppp0=(
-	"pppoe"				# Required plugin for PPPoE
-	"pppoa vc-encaps"		# Required plugin for PPPoA with an option
-	"capi"				# Required plugin for ISDN
-)
-#
-# PPP requires at least a username. You can optionally set a password here too
-# If you don't, then it will use the password specified in /etc/ppp/*-secrets
-# against the specified username
-username_ppp0='user'
-password_ppp0='password'
-# NOTE: You can set a blank password like so
-password_ppp0=
-#
-# The PPP daemon has many options you can specify - although there are many
-# and may seem daunting, it is recommended that you read the pppd man page
-# before enabling any of them
-pppd_ppp0=(
-	"maxfail 0"	# WARNING: It's not recommended you use this
-			# if you don't specify maxfail then we assume 0
-	"updetach" 	# If not set, "/etc/init.d/net.ppp0 start" will return
-			# immediately,  without waiting the link to come up
-			# for the first time.
-			# Do not use it for dial-on-demand links!
-	"debug" 	# Enables syslog debugging
-	"noauth"	# Do not require the peer to authenticate itself
-	"defaultroute"	# Make this PPP interface the default route
-	"usepeerdns"	# Use the DNS settings provided by PPP
-
-# On demand options
-	"demand"		# Enable dial on demand
-	"idle 30"		# Link goes down after 30 seconds of inactivity
-	"10.112.112.112:10.112.112.113"	# Phony IP addresses
-	"ipcp-accept-remote"	# Accept the peers idea of remote address
-	"ipcp-accept-local"	# Accept the peers idea of local address
-	"holdoff 3" 	# Wait 3 seconds after link dies before re-starting
-
-# Dead peer detection
-	"lcp-echo-interval 15"	# Send a LCP echo every 15 seconds
-	"lcp-echo-failure 3"	# Make peer dead after 3 consective
-				# echo-requests
-	
-# Compression options - use these to completely disable compression
-#	noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
-
-# Dial-up settings
-	"lock"				# Lock serial port
-	"115200"			# Set the serial port baud rate
-	"modem crtscts"			# Enable hardware flow control
-	"192.168.0.1:192.168.0.2"	# Local and remote IP addresses
-)
-#
-# Dial-up PPP users need to specify at least one telephone number
-phone_number_ppp0=( "12345689" ) # Maximum 2 phone numbers are supported
-# They will also need a chat script - here's a good one
-chat_ppp0=(
-#	'ABORT' 'BUSY'
-#	'ABORT' 'ERROR'
-#	'ABORT' 'NO ANSWER'
-#	'ABORT' 'NO CARRIER'
-#	'ABORT' 'NO DIALTONE'
-#	'ABORT' 'Invalid Login'
-#	'ABORT' 'Login incorrect'
-#	'TIMEOUT' '5'
-#	'' 'ATZ'
-#	'OK' 'AT' # Put your modem initialization string here
-#	'OK' 'ATDT\T'
-#	'TIMEOUT' '60'
-#	'CONNECT' ''
-#	'TIMEOUT' '5'
-#	'~--' ''
-)
-
-# If the link require extra configuration - for example wireless or
-# RFC 268 bridge - we need to depend on the bridge so they get
-# configured correctly.
-RC_NEED_ppp0="net.nas0"
-
-#WARNING: if MTU of the PPP interface is less than 1500 and you use this
-#machine as a router, you should add the following rule to your firewall
-#
-#iptables -I FORWARD 1 -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-
-#-----------------------------------------------------------------------------
-# ADSL
-# For ADSL support, emerge net-dialup/rp-pppoe
-# WARNING: This ADSL module is being deprecated in favour of the PPP module
-# above.
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ADSL
-config_eth0=( "adsl" )
-
-# You probably won't need to edit /etc/ppp/pppoe.conf if you set this
-adsl_user_eth0="my-adsl-username"
-
-#-----------------------------------------------------------------------------
-# ISDN
-# For ISDN support, emerge net-dialup/isdn4k-utils
-# You should make the following settings and also put your
-# username/password information in /etc/ppp/pap-secrets
-
-# Configure the interface to use ISDN
-config_ippp0=( "dhcp" )
-# It's important to specify dhcp if you need it!
-config_ippp0=( "192.168.0.1/24" )
-# Otherwise, you can use a static IP
-
-# NOTE: The interface name must be either ippp or isdn followed by a number
-
-# You may need this option to set the default route
-ipppd_eth0="defaultroute"
-
-#-----------------------------------------------------------------------------
-# MAC changer
-# To set a specific MAC address
-mac_eth0="00:11:22:33:44:55"
-
-# For changing MAC addresses using the below, emerge net-analyzer/macchanger
-# - to randomize the last 3 bytes only
-mac_eth0="random-ending"
-# - to randomize between the same physical type of connection (e.g. fibre,
-# copper, wireless) , all vendors
-mac_eth0="random-samekind"
-# - to randomize between any physical type of connection (e.g. fibre, copper,
-# wireless) , all vendors
-mac_eth0="random-anykind"
-# - full randomization - WARNING: some MAC addresses generated by this may NOT
-# act as expected
-mac_eth0="random-full"
-# custom - passes all parameters directly to net-analyzer/macchanger
-mac_eth0="some custom set of parameters"
-
-# You can also set other options based on the MAC address of your network card
-# Handy if you use different docking stations with laptops
-config_001122334455=( "dhcp" )
-
-#-----------------------------------------------------------------------------
-# TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
-#
-# You must specify if we're a tun or tap device. Then you can give it any
-# name you like - such as vpn
-tuntap_vpn="tun"
-config_vpn=( "192.168.0.1/24")
-
-# Or stick wit the generic names - like tap0
-tuntap_tap0="tap"
-config_tap0=( "192.168.0.1/24")
-
-# For passing custom options to tunctl use something like the following.  This
-# example sets the owner to adm
-tunctl_tun1="-u adm"
-# When using openvpn, there are no options
-
-#-----------------------------------------------------------------------------
-# Bridging (802.1d)
-# For bridging support emerge net-misc/bridge-utils
-
-# To add ports to bridge br0
-bridge_br0="eth0 eth1"
-# or dynamically add them when the interface comes up
-bridge_add_eth0="br0"
-bridge_add_eth1="br0"
-
-# You need to configure the ports to null values so dhcp does not get started 
-config_eth0=( "null" )
-config_eth1=( "null" )
-
-# Finally give the bridge an address - dhcp or a static IP
-config_br0=( "dhcp" ) # may not work when adding ports dynamically
-config_br0=( "192.168.0.1/24" )
-
-# If any of the ports require extra configuration - for example wireless or
-# ppp devices - we need to depend on them like so.
-RC_NEED_br0="net.eth0 net.eth1"
-
-# Below is an example of configuring the bridge
-# Consult "man brctl" for more details
-brctl_br0=( "setfd 0" "sethello 0" "stp off" )
-
-#-----------------------------------------------------------------------------
-# RFC 2684 Bridge Support 
-# For RFC 2684 bridge support emerge net-misc/br2684ctl
-
-# Interface names have to be of the form nas0, nas1, nas2, etc.
-# You have to specify a VPI and VCI for the interface like so
-br2684ctl_nas0="-a 0.38" # UK VPI and VCI
-
-# You may want to configure the encapsulation method as well by adding the -e
-# option to the command above (may need to be before the -a command)
-# -e 0 # LLC (default)
-# -e 1 # VC mux
-
-# Then you can configure the interface as normal
-config_nas0=( "192.168.0.1/24" )
-
-#-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
-# emerge sys-apps/iproute2
-#
-# For GRE tunnels
-iptunnel_vpn0="mode gre remote 207.170.82.1 key 0xffffffff ttl 255"
-
-# For IPIP tunnels
-iptunnel_vpn0="mode ipip remote 207.170.82.2 ttl 255"
-
-# To configure the interface
-config_vpn0=( "192.168.0.2 pointopoint 192.168.1.2" )	# ifconfig style
-config_vpn0=( "192.168.0.2 peer 192.168.1.1" )		# iproute2 style
-
-# 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
-# have a non-private address configured on an interface.
- link_6to4="eth0"		# Interface to base it's addresses on
- config_6to4=( "ip6to4" )
-# You may want to depend on eth0 like so
-RC_NEED_6to4="net.eth0"
-# To ensure that eth0 is configured before 6to4. Of course, the tunnel could be
-# any name and this also works for any configured interface.
-# NOTE: If you're not using iproute2 then your 6to4 tunnel has to be called
-# sit0 - otherwise use a different name like 6to4 in the example above.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on ESSID. See wireless.example for more details
-
-# To use dns settings such as these, dns_servers_eth0 must be set!
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-dns_domain_eth0="your.domain"
-dns_servers_eth0="192.168.0.2 192.168.0.3"
-dns_search_eth0="this.domain that.domain"
-dns_options_eth0=( "timeout 1" "rotate" )
-dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-nis_domain_eth0="domain"
-nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-#
-# netplug is a package that detects this and requires no extra configuration
-# on your part.
-# emerge sys-apps/netplug
-# or
-# emerge sys-apps/ifplugd
-# and you're done :)
-
-# By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
-# then you can specify a timeout here.
-plug_timeout="10"
-# A value of 0 means wait forever.
-
-# If you don't want to use netplug on a specific interface but you have it
-# installed, you can disable it for that interface via the modules statement
-modules_eth0=( "!netplug" )
-# You can do the same for ifplugd
-#
-# You can disable them both with the generic plug
-modules_eth0=( "!plug" )
-
-# To use specific ifplugd options, fex specifying wireless mode
-ifplugd_eth0="--api-mode=wlan"
-# man ifplugd for more options
-
-##############################################################################
-# ADVANCED CONFIGURATION
-# 
-# Four functions can be defined which will be called surrounding the
-# start/stop operations.  The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue.  If preup returns a non-zero value, then
-# interface configuration will be aborted.  If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-
-#preup() {
-#	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
-#	# package to be installed.
-#	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
-#		ewarn "No link on ${IFACE}, aborting configuration"
-#		return 1
-#	fi 
-#
-#	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the ethtool
-#	# package to be installed.
-#	if ethtool "${IFACE}" | grep -q 'Link detected: no'; then
-#		ewarn "No link on ${IFACE}, aborting configuration"
-#		return 1
-#	fi
-#
-#
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#predown() {
-#	# The default in the script is to test for NFS root and disallow
-#	# downing interfaces in that case.  Note that if you specify a
-#	# predown() function you will override that logic.  Here it is, in
-#	# case you still want it...
-#	if is_net_fs /; then
-#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-#		return 1
-#	fi
-#
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#postup() {
-#	# This function could be used, for example, to register with a
-#	# dynamic DNS service.  Another possibility would be to
-#	# send/receive mail once the interface is brought up.
-
-#	# Here is an example that allows the use of iproute rules
-#	# which have been configured using the rules_eth0 variable.
-#	#rules_eth0=(
-#	#	"from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100"
-#	#	"from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100"
-#	#)
-#	local x="rules_${IFVAR}[@]"
-#	local -a rules=( "${!x}" )
-#	if [[ -n ${rules} ]] ; then
-#		einfo "Adding IP policy routing rules"
-#		eindent
-#		# Ensure that the kernel supports policy routing
-#		if ! ip rule list | grep -q "^" ; then
-#			eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
-#			eerror "in your kernel to use ip rules"
-#		else
-#			for x in "${rules[@]}" ; do
-#				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
-#				eend $?
-#			done
-#		fi
-#		eoutdent
-#		# Flush the cache
-#		ip route flush cache dev "${IFACE}"
-#	fi
-
-#}
-
-#postdown() {
-#	# Enable Wake-On-LAN for every interface except for lo
-#	# Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
-#	# as well ;)
-#	[[ ${IFACE} != "lo" ]] && ethtool -s "${IFACE}" wol g
-
-#	Automatically erase any ip rules created in the example postup above
-#	if interface_exists "${IFACE}" ; then
-#		# Remove any rules for this interface
-#		local rule
-#		ip rule list | grep " iif ${IFACE}[ ]*" | {
-#			while read rule ; do
-#				rule="${rule#*:}"	
-#				ip rule del ${rule}
-#			done
-#		}
-#		# Flush the route cache
-#		ip route flush cache dev "${IFACE}"
-#	fi
-
-#	# Return 0 always
-#	return 0
-#}
-
-#failup() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}
-
-##############################################################################
-# FORCING MODULES
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-#
-# Loading modules is a slow affair - we have to check each one for the following
-# 1) Code sanity
-# 2) Has the required package been emerged?
-# 3) Has it modified anything?
-# 4) Have all the dependant modules been loaded?
-
-# Then we have to strip out the conflicting modules based on user preference
-# and default configuration and sort them into the correct order.
-# Finally we check the end result for dependencies.
-
-# This, of course, takes valuable CPU time so we provide module forcing as a
-# means to speed things up. We still do *some* checking but not much.
-
-# It is essential that you force modules in the correct order and supply all
-# the modules you need. You must always supply an interface module - we
-# supply ifconfig or iproute2.
-
-# The Big Fat Warning :- If you use module forcing do not complain to us or
-# file bugs about it not working!
-
-# Now that we've warned you twice, here's how to do it
-modules_force=( "ifconfig" )
-modules_force=( "iproute2" "dhcpcd" )
-
-# We can also apply this to a specific interface
-modules_force_eth1=( "iproute2" )
-
-# The below will not work
-modules_force=( "dhcpcd" )
-# No interface (ifconfig/iproute2)
-modules_force=( "ifconfig" "essidnet" "iwconfig" )
-# Although it will not crash, essidnet will not work as it has to come after
-# iwconfig
-modules_force=( "iproute2" "ifconfig" )
-# The interface will be setup twice which will cause problems
diff --git a/src/settings/plugins/ifnet/tests/nm-system-settings.conf b/src/settings/plugins/ifnet/tests/nm-system-settings.conf
deleted file mode 100644
index 39bc87b8..00000000
--- a/src/settings/plugins/ifnet/tests/nm-system-settings.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-[main]
-plugins=ifnet,keyfile
-
-[ifnet]
-managed=false
diff --git a/src/settings/plugins/ifnet/tests/test-ifnet.c b/src/settings/plugins/ifnet/tests/test-ifnet.c
deleted file mode 100644
index 68f2b928..00000000
--- a/src/settings/plugins/ifnet/tests/test-ifnet.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
-/* NetworkManager system settings service (ifnet)
- *
- * Mu Qiao <qiaomuf@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Copyright (C) 1999-2010 Gentoo Foundation, Inc.
- */
-
-#include "nm-default.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "nm-utils.h"
-
-#include "platform/nm-linux-platform.h"
-#include "dhcp/nm-dhcp-manager.h"
-
-#include "settings/plugins/ifnet/nms-ifnet-net-parser.h"
-#include "settings/plugins/ifnet/nms-ifnet-net-utils.h"
-#include "settings/plugins/ifnet/nms-ifnet-wpa-parser.h"
-#include "settings/plugins/ifnet/nms-ifnet-connection-parser.h"
-
-#include "nm-test-utils-core.h"
-
-/* Fake config handling; the values it returns don't matter, so this
- * is easier than forcing it to read our own config file, etc.
- */
-NMDhcpManager *
-nm_dhcp_manager_get (void)
-{
-	return NULL;
-}
-
-const char *
-nm_dhcp_manager_get_config (NMDhcpManager *dhcp_manager)
-{
-	return "dhclient";
-}
-
-static void
-test_getdata (void)
-{
-	g_assert (ifnet_get_data ("eth1", "config") &&
-	          strcmp (ifnet_get_data ("eth1", "config"), "( \"dhcp\" )") == 0);
-	g_assert (ifnet_get_data ("ppp0", "username") &&
-	          strcmp (ifnet_get_data ("ppp0", "username"), "user") == 0);
-	g_assert (ifnet_get_data ("ppp0", "password") &&
-	          strcmp (ifnet_get_data ("ppp0", "password"), "password") == 0);
-	g_assert (ifnet_get_global_data ("modules") &&
-	          strcmp ("!wpa_supplicant", ifnet_get_global_data ("modules")) == 0);
-}
-
-static void
-test_is_static (void)
-{
-	g_assert (!is_static_ip4 ("eth1"));
-	g_assert (is_static_ip4 ("eth0"));
-	g_assert (!is_static_ip6 ("eth0"));
-}
-
-static void
-test_has_default_route (void)
-{
-	g_assert (has_default_ip4_route ("eth0"));
-	g_assert (has_default_ip6_route ("eth4"));
-	g_assert (!has_default_ip4_route ("eth5") &&
-	          !has_default_ip6_route ("eth5"));
-}
-
-static void
-test_has_ip6_address (void)
-{
-	g_assert (has_ip6_address ("eth2"));
-	g_assert (!has_ip6_address ("eth0"));
-}
-
-static void
-test_is_ip4_address (void)
-{
-	gchar *address1 = "192.168.4.232/24";
-	gchar *address2 = "192.168.100.{1..254}/24";
-	gchar *address3 = "192.168.4.2555/24";
-
-	g_assert (is_ip4_address (address1));
-	g_assert (is_ip4_address (address2));
-	g_assert (!is_ip4_address (address3));
-}
-
-static void
-test_is_ip6_address (void)
-{
-	gchar *address1 = "4321:0:1:2:3:4:567:89ac/24";
-
-	g_assert (is_ip6_address (address1));
-}
-
-static void
-check_ip_block (ip_block * iblock, gchar * ip, guint32 prefix, gchar * gateway)
-{
-	g_assert_cmpstr (ip, ==, iblock->ip);
-	g_assert (prefix == iblock->prefix);
-	g_assert_cmpstr (gateway, ==, iblock->next_hop);
-}
-
-static void
-test_convert_ipv4_config_block (void)
-{
-	ip_block *iblock = convert_ip4_config_block ("eth0");
-	ip_block *tmp = iblock;
-
-	g_assert (iblock != NULL);
-	check_ip_block (iblock, "202.117.16.121", 24, "202.117.16.1");
-	iblock = iblock->next;
-	destroy_ip_block (tmp);
-	g_assert (iblock != NULL);
-	check_ip_block (iblock, "192.168.4.121", 24, "202.117.16.1");
-	destroy_ip_block (iblock);
-
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*Can't handle IPv4 address*202.117.16.1211*");
-	iblock = convert_ip4_config_block ("eth2");
-	g_test_assert_expected_messages ();
-	g_assert (iblock != NULL && iblock->next == NULL);
-	check_ip_block (iblock, "192.168.4.121", 24, NULL);
-	destroy_ip_block (iblock);
-
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*missing netmask or prefix*");
-	iblock = convert_ip4_config_block ("eth3");
-	g_assert (iblock == NULL);
-}
-
-static void
-test_convert_ipv4_routes_block (void)
-{
-	ip_block *iblock = convert_ip4_routes_block ("eth0");
-	ip_block *tmp = iblock;
-
-	g_assert (iblock != NULL);
-	check_ip_block (iblock, "192.168.4.0", 24, "192.168.4.1");
-	iblock = iblock->next;
-	destroy_ip_block (tmp);
-	g_assert (iblock == NULL);
-
-	iblock = convert_ip4_routes_block ("eth9");
-	tmp = iblock;
-
-	g_assert (iblock != NULL);
-	check_ip_block (iblock, "10.0.0.0", 8, "192.168.0.1");
-	iblock = iblock->next;
-	destroy_ip_block (tmp);
-	g_assert (iblock == NULL);
-}
-
-static void
-test_wpa_parser (void)
-{
-	const char *value;
-
-	g_assert (exist_ssid ("example"));
-
-	g_assert (exist_ssid ("static-wep-test"));
-	value = wpa_get_value ("static-wep-test", "key_mgmt");
-	g_assert_cmpstr (value, ==, "NONE");
-	value = wpa_get_value ("static-wep-test", "wep_key0");
-	g_assert_cmpstr (value, ==, "\"abcde\"");
-
-	g_assert (exist_ssid ("leap-example"));
-
-	value = wpa_get_value ("test-with-hash-in-psk", "psk");
-	g_assert_cmpstr (value, ==, "\"xjtudlc3731###asdfasdfasdf\"");
-}
-
-static void
-test_strip_string (void)
-{
-	gchar *str = "( \"default via     202.117.16.1\" )";
-	gchar *result = g_strdup (str);
-	gchar *result_b = result;
-
-	result = strip_string (result, '(');
-	result = strip_string (result, ')');
-	result = strip_string (result, '"');
-	g_assert_cmpstr (result, ==, "default via     202.117.16.1");
-	g_free (result_b);
-}
-
-static void
-test_is_unmanaged (void)
-{
-	g_assert (is_managed ("eth0"));
-	g_assert (!is_managed ("eth4"));
-}
-
-static void
-test_new_connection (void)
-{
-	GError *error = NULL;
-	NMConnection *connection;
-
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*Can't handle IPv4 address*202.117.16.1211*");
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*Can't handle IPv6 address*202.117.16.1211*");
-	connection = ifnet_update_connection_from_config_block ("eth2", NULL, &error);
-	g_test_assert_expected_messages ();
-	g_assert (connection != NULL);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("qiaomuf", NULL, &error);
-	g_assert (connection != NULL);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("myxjtu2", NULL, &error);
-	g_assert (connection != NULL);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("eth9", NULL, &error);
-	g_assert (connection != NULL);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("eth10", NULL, &error);
-	g_assert (connection != NULL);
-	g_object_unref (connection);
-}
-
-static void
-kill_backup (char **path)
-{
-	if (*path) {
-		unlink (*path);
-		g_free (*path);
-		*path = NULL;
-	}
-}
-
-#define NET_GEN_NAME "net.generate"
-#define SUP_GEN_NAME "wpa_supplicant.conf.generate"
-
-static void
-test_update_connection (void)
-{
-	GError *error = NULL;
-	NMConnection *connection;
-	gboolean success;
-	char *backup = NULL;
-	char *basepath = TEST_IFNET_DIR;
-
-	connection = ifnet_update_connection_from_config_block ("eth0", basepath, &error);
-	g_assert (connection != NULL);
-
-	success = ifnet_update_parsers_by_connection (connection, "eth0",
-	                                              NET_GEN_NAME,
-	                                              SUP_GEN_NAME,
-	                                              NULL,
-	                                              &backup,
-	                                              &error);
-	kill_backup (&backup);
-	g_assert (success);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("0xab3ace", basepath, &error);
-	g_assert (connection != NULL);
-
-	success = ifnet_update_parsers_by_connection (connection, "0xab3ace",
-	                                              NET_GEN_NAME,
-	                                              SUP_GEN_NAME,
-	                                              NULL,
-	                                              &backup,
-	                                              &error);
-	kill_backup (&backup);
-	g_assert (success);
-	g_object_unref (connection);
-
-	unlink (NET_GEN_NAME);
-	unlink (SUP_GEN_NAME);
-}
-
-static void
-test_add_connection (void)
-{
-	NMConnection *connection;
-	char *backup = NULL;
-	const char *basepath = TEST_IFNET_DIR;
-
-	connection = ifnet_update_connection_from_config_block ("eth0", basepath, NULL);
-	g_assert (ifnet_add_new_connection (connection, NET_GEN_NAME, SUP_GEN_NAME, NULL, &backup, NULL));
-	kill_backup (&backup);
-	g_object_unref (connection);
-
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*Can't handle ipv4 address: brd, missing netmask or prefix*");
-	g_test_expect_message ("NetworkManager", G_LOG_LEVEL_MESSAGE,
-	                       "*Can't handle ipv4 address: 202.117.16.255, missing netmask or prefix*");
-	connection = ifnet_update_connection_from_config_block ("myxjtu2", basepath, NULL);
-	g_test_assert_expected_messages ();
-	g_assert (ifnet_add_new_connection (connection, NET_GEN_NAME, SUP_GEN_NAME, NULL, &backup, NULL));
-	kill_backup (&backup);
-	g_object_unref (connection);
-
-	unlink (NET_GEN_NAME);
-	unlink (SUP_GEN_NAME);
-}
-
-static void
-test_delete_connection (void)
-{
-	GError *error = NULL;
-	NMConnection *connection;
-	char *backup = NULL;
-
-	connection = ifnet_update_connection_from_config_block ("eth7", NULL, &error);
-	g_assert (connection != NULL);
-	g_assert (ifnet_delete_connection_in_parsers ("eth7", NET_GEN_NAME, SUP_GEN_NAME, &backup));
-	kill_backup (&backup);
-	g_object_unref (connection);
-
-	connection = ifnet_update_connection_from_config_block ("qiaomuf", NULL, &error);
-	g_assert (connection != NULL);
-	g_assert (ifnet_delete_connection_in_parsers ("qiaomuf", NET_GEN_NAME, SUP_GEN_NAME, &backup));
-	kill_backup (&backup);
-	g_object_unref (connection);
-
-	unlink (NET_GEN_NAME);
-	unlink (SUP_GEN_NAME);
-}
-
-static void
-test_missing_config (void)
-{
-	gs_free_error GError *error = NULL;
-	NMConnection *connection;
-
-	connection = ifnet_update_connection_from_config_block ("eth8", NULL, &error);
-	g_assert_error (error, NM_SETTINGS_ERROR, NM_SETTINGS_ERROR_INVALID_CONNECTION);
-	g_assert (connection == NULL && error != NULL);
-}
-
-NMTST_DEFINE ();
-
-#define TPATH "/settings/plugins/ifnet/"
-
-int
-main (int argc, char **argv)
-{
-	int ret;
-
-	nm_linux_platform_setup ();
-
-	nmtst_init_assert_logging (&argc, &argv, "WARN", "DEFAULT");
-
-	ifnet_init (TEST_IFNET_DIR "/net");
-	wpa_parser_init (TEST_IFNET_DIR "/wpa_supplicant.conf");
-
-	g_test_add_func (TPATH "strip-string", test_strip_string);
-	g_test_add_func (TPATH "is-static", test_is_static);
-	g_test_add_func (TPATH "has-ip6-address", test_has_ip6_address);
-	g_test_add_func (TPATH "has-default-route", test_has_default_route);
-	g_test_add_func (TPATH "get-data", test_getdata);
-	g_test_add_func (TPATH "is-ip4-address", test_is_ip4_address);
-	g_test_add_func (TPATH "is-ip6-address", test_is_ip6_address);
-	g_test_add_func (TPATH "convert-ip4-config", test_convert_ipv4_config_block);
-	g_test_add_func (TPATH "convert-ip4-routes", test_convert_ipv4_routes_block);
-	g_test_add_func (TPATH "is-unmanaged", test_is_unmanaged);
-	g_test_add_func (TPATH "wpa-parser", test_wpa_parser);
-	g_test_add_func (TPATH "new-connection", test_new_connection);
-	g_test_add_func (TPATH "update-connection", test_update_connection);
-	g_test_add_func (TPATH "add-connection", test_add_connection);
-	g_test_add_func (TPATH "delete-connection", test_delete_connection);
-	g_test_add_func (TPATH "missing-config", test_missing_config);
-
-	ret = g_test_run ();
-
-	ifnet_destroy ();
-	wpa_parser_destroy ();
-
-	return ret;
-}
diff --git a/src/settings/plugins/ifnet/tests/test_ca_cert.pem b/src/settings/plugins/ifnet/tests/test_ca_cert.pem
deleted file mode 100644
index ef1be20d..00000000
--- a/src/settings/plugins/ifnet/tests/test_ca_cert.pem
+++ /dev/null
@@ -1,27 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIEjzCCA3egAwIBAgIJAOvnZPt59yIZMA0GCSqGSIb3DQEBBQUAMIGLMQswCQYD
-VQQGEwJVUzESMBAGA1UECBMJQmVya3NoaXJlMRAwDgYDVQQHEwdOZXdidXJ5MRcw
-FQYDVQQKEw5NeSBDb21wYW55IEx0ZDEQMA4GA1UECxMHVGVzdGluZzENMAsGA1UE
-AxMEdGVzdDEcMBoGCSqGSIb3DQEJARYNdGVzdEB0ZXN0LmNvbTAeFw0wOTAzMTAx
-NTEyMTRaFw0xOTAzMDgxNTEyMTRaMIGLMQswCQYDVQQGEwJVUzESMBAGA1UECBMJ
-QmVya3NoaXJlMRAwDgYDVQQHEwdOZXdidXJ5MRcwFQYDVQQKEw5NeSBDb21wYW55
-IEx0ZDEQMA4GA1UECxMHVGVzdGluZzENMAsGA1UEAxMEdGVzdDEcMBoGCSqGSIb3
-DQEJARYNdGVzdEB0ZXN0LmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoC
-ggEBAKot9j+/+CX1/gZLgJHIXCRgCItKLGnf7qGbgqB9T2ACBqR0jllKWwDKrcWU
-xjXNIc+GF9Wnv+lX6G0Okn4Zt3/uRNobL+2b/yOF7M3Td3/9W873zdkQQX930YZc
-Rr8uxdRPP5bxiCgtcw632y21sSEbG9mjccAUnV/0jdvfmMNj0i8gN6E0fMBiJ9S3
-FkxX/KFvt9JWE9CtoyL7ki7UIDq+6vj7Gd5N0B3dOa1y+rRHZzKlJPcSXQSEYUS4
-HmKDwiKSVahft8c4tDn7KPi0vex91hlgZVd3usL2E/Vq7o5D9FAZ5kZY0AdFXwdm
-J4lO4Mj7ac7GE4vNERNcXVIX59sCAwEAAaOB8zCB8DAdBgNVHQ4EFgQUuDU3Mr7P
-T3n1e3Sy8hBauoDFahAwgcAGA1UdIwSBuDCBtYAUuDU3Mr7PT3n1e3Sy8hBauoDF
-ahChgZGkgY4wgYsxCzAJBgNVBAYTAlVTMRIwEAYDVQQIEwlCZXJrc2hpcmUxEDAO
-BgNVBAcTB05ld2J1cnkxFzAVBgNVBAoTDk15IENvbXBhbnkgTHRkMRAwDgYDVQQL
-EwdUZXN0aW5nMQ0wCwYDVQQDEwR0ZXN0MRwwGgYJKoZIhvcNAQkBFg10ZXN0QHRl
-c3QuY29tggkA6+dk+3n3IhkwDAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAAOC
-AQEAVRG4aALIvCXCiKfe7K+iJxjBVRDFPEf7JWA9LGgbFOn6pNvbxonrR+0BETdc
-JV1ET4ct2xsE7QNFIkp9GKRC+6J32zCo8qtLCD5+v436r8TUG2/t2JRMkb9I2XVT
-p7RJoot6M0Ltf8KNQUPYh756xmKZ4USfQUwc58MOSDGY8VWEXJOYij9Pf0e0c52t
-qiCEjXH7uXiS8Pgq9TYm7AkWSOrglYhSa83x0f8mtT8Q15nBESIHZ6o8FAS2bBgn
-B0BkrKRjtBUkuJG3vTox+bYINh2Gxi1JZHWSV1tN5z3hd4VFcKqanW5OgQwToBqp
-3nniskIjbH0xjgZf/nVMyLnjxg==
------END CERTIFICATE-----
diff --git a/src/settings/plugins/ifnet/tests/wpa_supplicant.conf b/src/settings/plugins/ifnet/tests/wpa_supplicant.conf
deleted file mode 100644
index 917d495d..00000000
--- a/src/settings/plugins/ifnet/tests/wpa_supplicant.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
-	ssid="example"
-	proto=WPA
-	key_mgmt=WPA-PSK
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-	priority=2
-}
-
-# LEAP with dynamic WEP keys
-network={
-	ssid="leap-example"
-	key_mgmt=IEEE8021X
-	eap=LEAP
-	identity="user"
-	password="foobar"
-}
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="static-wep-test"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-}
-
-# Wildcard match for SSID (plaintext APs only). This example select any
-# open AP regardless of its SSID.
-network={
-	key_mgmt=NONE
-}
-
-network={
-  ssid="myxjtu2"
-  scan_ssid=1
-  key_mgmt=WPA-PSK
-  psk="xjtudlc3731"
-  disabled=0
-  key_mgmt=NONE
-  wep_key0="12345"
-  wep_key1=1234567890
-  wep_key2="zxcvb"
-  wep_tx_keyidx=1
-  auth_alg=OPEN
-  mode=1
-}
-
-network={
-	ssid=ab3ace
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="test_ca_cert.pem"
-	phase2="auth=CHAP"
-	priority=20
-}
-
-network={
-  ssid="test-with-hash-in-psk"
-  key_mgmt=WPA-PSK
-  psk="xjtudlc3731###asdfasdfasdf"
-}
-