New upstream version 1.37.92 upstream/1.37.92

1 files changed, 106 insertions, 0 deletions

diff --git a/src/linux-headers/nl80211-vnd-intel.h b/src/linux-headers/nl80211-vnd-intel.h
new file mode 100644
index 00000000..4ed7d0b2
--- /dev/null
+++ b/src/linux-headers/nl80211-vnd-intel.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __VENDOR_CMD_INTEL_H__
+#define __VENDOR_CMD_INTEL_H__
+
+#define INTEL_OUI	0x001735
+
+/**
+ * enum iwl_mvm_vendor_cmd - supported vendor commands
+ * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
+ * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
+ *	This is useful when the CSME firmware owns the device and the kernel
+ *	wants to use it. In case the CSME firmware has no connection active the
+ *	kernel will manage on its own to get ownership of the device.
+ *	When the CSME firmware has an active connection, the user space
+ *	involvement is required. The kernel will assert the RFKILL signal with
+ *	the "device not owned" reason so that nobody can touch the device. Then
+ *	the user space can run the following flow to be able to get connected
+ *	to the very same AP the CSME firmware is currently connected to:
+ *
+ *	1) The user space (NetworkManager) boots and sees that the device is
+ *	    in RFKILL because the host doesn't own the device
+ *	2) The user space asks the kernel what AP the CSME firmware is
+ *	   connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO)
+ *	3) The user space checks if it has a profile that matches the reply
+ *	   from the CSME firmware
+ *	4) The user space installs a network to the wpa_supplicant with a
+ *	   specific BSSID and a specific frequency
+ *	5) The user space prevents any type of full scan
+ *	6) The user space asks iwlmei to request ownership on the device (with
+ *	   this command)
+ *	7) iwlmei requests ownership from the CSME firmware
+ *	8) The CSME firmware grants ownership
+ *	9) iwlmei tells iwlwifi to lift the RFKILL
+ *	10) RFKILL OFF is reported to user space
+ *	11) The host boots the device, loads the firwmare, and connects to a
+ *	    specific BSSID without scanning including IP as fast as it can
+ *	12) The host reports to the CSME firmware that there is a connection
+ *	13) The TCP connection is preserved and the host has connectivity
+ *
+ * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
+ *	It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
+ *	&IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
+ */
+
+enum iwl_mvm_vendor_cmd {
+	IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO			= 0x2d,
+	IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP			= 0x30,
+	IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT		= 0x32,
+};
+
+enum iwl_vendor_auth_akm_mode {
+	IWL_VENDOR_AUTH_OPEN,
+	IWL_VENDOR_AUTH_RSNA = 0x6,
+	IWL_VENDOR_AUTH_RSNA_PSK,
+	IWL_VENDOR_AUTH_SAE = 0x9,
+	IWL_VENDOR_AUTH_MAX,
+};
+
+/**
+ * enum iwl_mvm_vendor_attr - attributes used in vendor commands
+ * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
+ * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
+ * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
+ * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
+ *	mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
+ * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
+ *	roaming is forbidden or not. Value 1 means roaming is forbidden,
+ *	0 mean roaming is allowed.
+ * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
+ *	as specified in &enum iwl_vendor_auth_akm_mode.
+ * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
+ * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
+ *	0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
+ *	collocated AP. Relevant for 6GHz AP info.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
+ *	Relevant for 6GHz AP info.
+ *
+ * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
+ * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
+
+ */
+enum iwl_mvm_vendor_attr {
+	__IWL_MVM_VENDOR_ATTR_INVALID				= 0x00,
+	IWL_MVM_VENDOR_ATTR_VIF_ADDR				= 0x02,
+	IWL_MVM_VENDOR_ATTR_ADDR				= 0x0a,
+	IWL_MVM_VENDOR_ATTR_SSID				= 0x3d,
+	IWL_MVM_VENDOR_ATTR_STA_CIPHER				= 0x51,
+	IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN			= 0x64,
+	IWL_MVM_VENDOR_ATTR_AUTH_MODE				= 0x65,
+	IWL_MVM_VENDOR_ATTR_CHANNEL_NUM				= 0x66,
+	IWL_MVM_VENDOR_ATTR_BAND				= 0x69,
+	IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL			= 0x70,
+	IWL_MVM_VENDOR_ATTR_COLLOC_ADDR				= 0x71,
+
+	NUM_IWL_MVM_VENDOR_ATTR,
+	MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
+};
+
+#endif /* __VENDOR_CMD_INTEL_H__ */