New upstream version 1.47.91 upstream/1.47.91

2 files changed, 29 insertions, 3 deletions

diff --git a/src/libnmc-setting/nm-meta-setting-desc.c b/src/libnmc-setting/nm-meta-setting-desc.c
index da00c30b..b58fb5ce 100644
--- a/src/libnmc-setting/nm-meta-setting-desc.c
+++ b/src/libnmc-setting/nm-meta-setting-desc.c
@@ -6620,8 +6620,18 @@ static const NMMetaPropertyInfo *const property_infos_IP6_CONFIG[] = {
     PROPERTY_INFO_WITH_DESC (NM_SETTING_IP6_CONFIG_IP6_PRIVACY,
         .property_type =                &_pt_gobject_enum,
         .property_typ_data = DEFINE_PROPERTY_TYP_DATA_SUBTYPE (gobject_enum,
+            .value_infos =              ENUM_VALUE_INFOS(
+                {
+                    .value = NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN,
+                    .nick = "default",
+                },
+            ),
             .value_infos_get =          ENUM_VALUE_INFOS (
                 {
+                    .value = NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN,
+                    .nick = "default",
+                },
+                {
                     .value = NM_SETTING_IP6_CONFIG_PRIVACY_PREFER_PUBLIC_ADDR,
                     .nick = "enabled, prefer public IP",
                 },
@@ -6634,9 +6644,25 @@ static const NMMetaPropertyInfo *const property_infos_IP6_CONFIG[] = {
     ),
     PROPERTY_INFO_WITH_DESC (NM_SETTING_IP6_CONFIG_TEMP_VALID_LIFETIME,
         .property_type =                &_pt_gobject_int,
+        .property_typ_data = DEFINE_PROPERTY_TYP_DATA_SUBTYPE(gobject_int,
+            .value_infos =              INT_VALUE_INFOS(
+                {
+                    .value.i64 = 0,
+                    .nick = "default"
+                },
+            ),
+        ),
     ),
     PROPERTY_INFO_WITH_DESC (NM_SETTING_IP6_CONFIG_TEMP_PREFERRED_LIFETIME,
         .property_type =                &_pt_gobject_int,
+        .property_typ_data = DEFINE_PROPERTY_TYP_DATA_SUBTYPE(gobject_int,
+            .value_infos =              INT_VALUE_INFOS(
+                {
+                    .value.i64 = 0,
+                    .nick = "default"
+                },
+            ),
+        ),
     ),
     PROPERTY_INFO_WITH_DESC (NM_SETTING_IP6_CONFIG_ADDR_GEN_MODE,
         .property_type =                &_pt_gobject_enum,
diff --git a/src/libnmc-setting/settings-docs.h.in b/src/libnmc-setting/settings-docs.h.in
index fc5299fc..f83cfd43 100644
--- a/src/libnmc-setting/settings-docs.h.in
+++ b/src/libnmc-setting/settings-docs.h.in
@@ -216,7 +216,7 @@
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_GATEWAY N_("The gateway associated with this configuration. This is only meaningful if \"addresses\" is also set. Setting the gateway causes NetworkManager to configure a standard default route with the gateway as next hop. This is ignored if \"never-default\" is set. An alternative is to configure the default route explicitly with a manual route and /0 as prefix length. Note that the gateway usually conflicts with routing that NetworkManager configures for WireGuard interfaces, so usually it should not be set in that case. See \"ip4-auto-default-route\".")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IGNORE_AUTO_DNS N_("When \"method\" is set to \"auto\" and this property to TRUE, automatically configured name servers and search domains are ignored and only name servers and search domains specified in the \"dns\" and \"dns-search\" properties, if any, are used.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IGNORE_AUTO_ROUTES N_("When \"method\" is set to \"auto\" and this property to TRUE, automatically configured routes are ignored and only routes specified in the \"routes\" property, if any, are used.")
-#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IP6_PRIVACY N_("Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). If set to \"-1\" (unknown) for a connection, the value is taken from the global \"ipv6.ip6-privacy\" setting. If the global setting is unspecified or also set to \"-1\", the value is set from the original value of \"/proc/sys/net/ipv6/conf/<iface>/use_tempaddr\" from before NetworkManager started. Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the \"addr-gen-mode\" property's \"stable-privacy\" setting as another way of avoiding host tracking with IPv6 addresses.")
+#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_IP6_PRIVACY N_("Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941.  If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64.  This enhances privacy, but could cause problems in some applications, on the other hand.  The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to \"-1\" (default) means fallback to global configuration \"ipv6.ip6-privacy\". If it's also unspecified or set to \"-1\", fallback to read \"/proc/sys/net/ipv6/conf/default/use_tempaddr\". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the \"addr-gen-mode\" property's \"stable-privacy\" setting as another way of avoiding host tracking with IPv6 addresses.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_MAY_FAIL N_("If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out.  Note that at least one IP configuration must succeed or overall network configuration will still fail.  For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_METHOD N_("The IPv6 connection method.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_MTU N_("Maximum transmission unit size, in bytes. If zero (the default), the MTU is set automatically from router advertisements or is left equal to the link-layer MTU. If greater than the link-layer MTU, or greater than zero but less than the minimum IPv6 MTU of 1280, this value has no effect.")
@@ -228,8 +228,8 @@
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ROUTE_TABLE N_("Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ROUTES N_("Array of IP routes.")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_ROUTING_RULES N_("A comma separated list of routing rules for policy routing.")
-#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_TEMP_PREFERRED_LIFETIME N_("The preferred lifetime of autogenerated temporary addresses, in seconds. If set to \"0\" (unknown) for a connection, the value is taken from the global \"ipv6.temp-preferred-lifetime\" setting. If the global setting is unspecified or also set to \"0\", the value is set from the original value of \"/proc/sys/net/ipv6/conf/<iface>/temp_prefered_lft\" from before NetworkManager started.")
-#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_TEMP_VALID_LIFETIME N_("The valid lifetime of autogenerated temporary addresses, in seconds. If set to \"0\" (unknown) for a connection, the value is taken from the global \"ipv6.temp-valid-lifetime\" setting. If the global setting is unspecified or also set to \"0\", the value is set from the original value of \"/proc/sys/net/ipv6/conf/<iface>/temp_valid_lft\" from before NetworkManager started.")
+#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_TEMP_PREFERRED_LIFETIME N_("The preferred lifetime of autogenerated temporary addresses, in seconds. Having a per-connection setting set to \"0\" (default) means fallback to global configuration \"ipv6.temp-preferred-lifetime\" setting\". If it's also unspecified or set to \"0\", fallback to read \"/proc/sys/net/ipv6/conf/default/temp_prefered_lft\".")
+#define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_TEMP_VALID_LIFETIME N_("The valid lifetime of autogenerated temporary addresses, in seconds. Having a per-connection setting set to \"0\" (default) means fallback to global configuration \"ipv6.temp-valid-lifetime\" setting\". If it's also unspecified or set to \"0\", fallback to read \"/proc/sys/net/ipv6/conf/default/temp_valid_lft\".")
 #define DESCRIBE_DOC_NM_SETTING_IP6_CONFIG_TOKEN N_("Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. When set, the token is used as IPv6 interface identifier instead of the hardware address. This only applies to addresses from stateless autoconfiguration, not to IPv6 link local addresses.")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_ENCAPSULATION_LIMIT N_("How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. To disable this option, add 0x1 (ip6-ign-encap-limit) to ip-tunnel flags.")
 #define DESCRIBE_DOC_NM_SETTING_IP_TUNNEL_FLAGS N_("Tunnel flags. Currently, the following values are supported: 0x1 (ip6-ign-encap-limit), 0x2 (ip6-use-orig-tclass), 0x4 (ip6-use-orig-flowlabel), 0x8 (ip6-mip6-dev), 0x10 (ip6-rcv-dscp-copy) and 0x20 (ip6-use-orig-fwmark). They are valid only for IPv6 tunnels.")