diff options
| author | Michael Biebl <biebl@debian.org> | 2021-10-01 23:05:04 +0200 |
|---|---|---|
| committer | Michael Biebl <biebl@debian.org> | 2021-10-01 23:05:04 +0200 |
| commit | e74c568b07b50b97873fb4ee1d776dedefbd54d6 (patch) | |
| tree | 3469f17ea9af91f7ff169b890633bda68b0cf76e /src/libnm-core-public/nm-dbus-interface.h | |
| parent | bfe522304da217296e2a61040f58e35ec5d6f3f2 (diff) | |
New upstream version 1.32.12 upstream/1.32.12
Diffstat (limited to 'src/libnm-core-public/nm-dbus-interface.h')
| -rw-r--r-- | src/libnm-core-public/nm-dbus-interface.h | 1290 |
1 files changed, 1290 insertions, 0 deletions
diff --git a/src/libnm-core-public/nm-dbus-interface.h b/src/libnm-core-public/nm-dbus-interface.h new file mode 100644 index 00000000..626b2006 --- /dev/null +++ b/src/libnm-core-public/nm-dbus-interface.h @@ -0,0 +1,1290 @@ +/* SPDX-License-Identifier: LGPL-2.1-or-later */ +/* + * Copyright (C) 2004 - 2018 Red Hat, Inc. + */ + +/* Definitions related to NetworkManager's D-Bus interfaces. + * + * Note that although this header is installed as part of libnm, it is also + * used by some external code that does not link to libnm. + */ + +#ifndef __NM_DBUS_INTERFACE_H__ +#define __NM_DBUS_INTERFACE_H__ + +/* This header must not include glib or libnm. */ + +#ifndef NM_VERSION_H + #define NM_AVAILABLE_IN_1_2 + #define NM_AVAILABLE_IN_1_8 +#endif + +/* + * dbus services details + */ +#define NM_DBUS_SERVICE "org.freedesktop.NetworkManager" + +#define NM_DBUS_INTERFACE "org.freedesktop.NetworkManager" +#define NM_DBUS_INTERFACE_ACCESS_POINT NM_DBUS_INTERFACE ".AccessPoint" +#define NM_DBUS_INTERFACE_ACTIVE_CONNECTION NM_DBUS_INTERFACE ".Connection.Active" +#define NM_DBUS_INTERFACE_CHECKPOINT NM_DBUS_INTERFACE ".Checkpoint" +#define NM_DBUS_INTERFACE_DEVICE NM_DBUS_INTERFACE ".Device" +#define NM_DBUS_INTERFACE_DEVICE_6LOWPAN NM_DBUS_INTERFACE_DEVICE ".Lowpan" +#define NM_DBUS_INTERFACE_DEVICE_ADSL NM_DBUS_INTERFACE_DEVICE ".Adsl" +#define NM_DBUS_INTERFACE_DEVICE_BLUETOOTH NM_DBUS_INTERFACE_DEVICE ".Bluetooth" +#define NM_DBUS_INTERFACE_DEVICE_BOND NM_DBUS_INTERFACE_DEVICE ".Bond" +#define NM_DBUS_INTERFACE_DEVICE_BRIDGE NM_DBUS_INTERFACE_DEVICE ".Bridge" +#define NM_DBUS_INTERFACE_DEVICE_DUMMY NM_DBUS_INTERFACE_DEVICE ".Dummy" +#define NM_DBUS_INTERFACE_DEVICE_GENERIC NM_DBUS_INTERFACE_DEVICE ".Generic" +#define NM_DBUS_INTERFACE_DEVICE_GRE NM_DBUS_INTERFACE_DEVICE ".Gre" +#define NM_DBUS_INTERFACE_DEVICE_INFINIBAND NM_DBUS_INTERFACE_DEVICE ".Infiniband" +#define NM_DBUS_INTERFACE_DEVICE_IP_TUNNEL NM_DBUS_INTERFACE_DEVICE ".IPTunnel" +#define NM_DBUS_INTERFACE_DEVICE_MACSEC NM_DBUS_INTERFACE_DEVICE ".Macsec" +#define NM_DBUS_INTERFACE_DEVICE_MACVLAN NM_DBUS_INTERFACE_DEVICE ".Macvlan" +#define NM_DBUS_INTERFACE_DEVICE_MODEM NM_DBUS_INTERFACE_DEVICE ".Modem" +#define NM_DBUS_INTERFACE_DEVICE_OLPC_MESH NM_DBUS_INTERFACE_DEVICE ".OlpcMesh" +#define NM_DBUS_INTERFACE_DEVICE_OVS_BRIDGE NM_DBUS_INTERFACE_DEVICE ".OvsBridge" +#define NM_DBUS_INTERFACE_DEVICE_OVS_INTERFACE NM_DBUS_INTERFACE_DEVICE ".OvsInterface" +#define NM_DBUS_INTERFACE_DEVICE_OVS_PORT NM_DBUS_INTERFACE_DEVICE ".OvsPort" +#define NM_DBUS_INTERFACE_DEVICE_PPP NM_DBUS_INTERFACE_DEVICE ".Ppp" +#define NM_DBUS_INTERFACE_DEVICE_STATISTICS NM_DBUS_INTERFACE_DEVICE ".Statistics" +#define NM_DBUS_INTERFACE_DEVICE_TEAM NM_DBUS_INTERFACE_DEVICE ".Team" +#define NM_DBUS_INTERFACE_DEVICE_TUN NM_DBUS_INTERFACE_DEVICE ".Tun" +#define NM_DBUS_INTERFACE_DEVICE_VETH NM_DBUS_INTERFACE_DEVICE ".Veth" +#define NM_DBUS_INTERFACE_DEVICE_VLAN NM_DBUS_INTERFACE_DEVICE ".Vlan" +#define NM_DBUS_INTERFACE_DEVICE_VRF NM_DBUS_INTERFACE_DEVICE ".Vrf" +#define NM_DBUS_INTERFACE_DEVICE_VXLAN NM_DBUS_INTERFACE_DEVICE ".Vxlan" +#define NM_DBUS_INTERFACE_DEVICE_WIFI_P2P NM_DBUS_INTERFACE_DEVICE ".WifiP2P" +#define NM_DBUS_INTERFACE_DEVICE_WIMAX NM_DBUS_INTERFACE_DEVICE ".WiMax" +#define NM_DBUS_INTERFACE_DEVICE_WIRED NM_DBUS_INTERFACE_DEVICE ".Wired" +#define NM_DBUS_INTERFACE_DEVICE_WIREGUARD NM_DBUS_INTERFACE_DEVICE ".WireGuard" +#define NM_DBUS_INTERFACE_DEVICE_WIRELESS NM_DBUS_INTERFACE_DEVICE ".Wireless" +#define NM_DBUS_INTERFACE_DEVICE_WPAN NM_DBUS_INTERFACE_DEVICE ".Wpan" +#define NM_DBUS_INTERFACE_DHCP4_CONFIG NM_DBUS_INTERFACE ".DHCP4Config" +#define NM_DBUS_INTERFACE_DHCP6_CONFIG NM_DBUS_INTERFACE ".DHCP6Config" +#define NM_DBUS_INTERFACE_IP4_CONFIG NM_DBUS_INTERFACE ".IP4Config" +#define NM_DBUS_INTERFACE_IP6_CONFIG NM_DBUS_INTERFACE ".IP6Config" +#define NM_DBUS_INTERFACE_WIFI_P2P_PEER NM_DBUS_INTERFACE ".WifiP2PPeer" +#define NM_DBUS_INTERFACE_WIMAX_NSP NM_DBUS_INTERFACE ".WiMax.Nsp" + +#define NM_DBUS_PATH "/org/freedesktop/NetworkManager" +#define NM_DBUS_PATH_ACCESS_POINT NM_DBUS_PATH "/AccessPoint" +#define NM_DBUS_PATH_WIFI_P2P_PEER NM_DBUS_PATH "/WifiP2PPeer" +#define NM_DBUS_PATH_WIMAX_NSP NM_DBUS_PATH "/Nsp" + +#define NM_DBUS_INTERFACE_SETTINGS "org.freedesktop.NetworkManager.Settings" +#define NM_DBUS_PATH_SETTINGS "/org/freedesktop/NetworkManager/Settings" + +#define NM_DBUS_INTERFACE_SETTINGS_CONNECTION "org.freedesktop.NetworkManager.Settings.Connection" +#define NM_DBUS_PATH_SETTINGS_CONNECTION "/org/freedesktop/NetworkManager/Settings/Connection" +#define NM_DBUS_INTERFACE_SETTINGS_CONNECTION_SECRETS \ + "org.freedesktop.NetworkManager.Settings.Connection.Secrets" + +#define NM_DBUS_INTERFACE_AGENT_MANAGER NM_DBUS_INTERFACE ".AgentManager" +#define NM_DBUS_PATH_AGENT_MANAGER "/org/freedesktop/NetworkManager/AgentManager" + +#define NM_DBUS_INTERFACE_SECRET_AGENT NM_DBUS_INTERFACE ".SecretAgent" +#define NM_DBUS_PATH_SECRET_AGENT "/org/freedesktop/NetworkManager/SecretAgent" + +#define NM_DBUS_INTERFACE_DNS_MANAGER "org.freedesktop.NetworkManager.DnsManager" +#define NM_DBUS_PATH_DNS_MANAGER "/org/freedesktop/NetworkManager/DnsManager" + +/** + * NMCapability: + * @NM_CAPABILITY_TEAM: Teams can be managed. This means the team device plugin + * is loaded. + * @NM_CAPABILITY_OVS: OpenVSwitch can be managed. This means the OVS device plugin + * is loaded. Since: 1.24. + * + * #NMCapability names the numbers in the Capabilities property. + * Capabilities are positive numbers. They are part of stable API + * and a certain capability number is guaranteed not to change. + * + * The range 0x7000 - 0x7FFF of capabilities is guaranteed not to be + * used by upstream NetworkManager. It could thus be used for downstream + * extensions. + */ +typedef enum { + NM_CAPABILITY_TEAM = 1, + NM_CAPABILITY_OVS = 2, +} NMCapability; + +/** + * NMState: + * @NM_STATE_UNKNOWN: Networking state is unknown. This indicates a daemon error + * that makes it unable to reasonably assess the state. In such event the + * applications are expected to assume Internet connectivity might be present + * and not disable controls that require network access. + * The graphical shells may hide the network accessibility indicator altogether + * since no meaningful status indication can be provided. + * @NM_STATE_ASLEEP: Networking is not enabled, the system is being suspended or + * resumed from suspend. + * @NM_STATE_DISCONNECTED: There is no active network connection. + * The graphical shell should indicate no network connectivity and the + * applications should not attempt to access the network. + * @NM_STATE_DISCONNECTING: Network connections are being cleaned up. + * The applications should tear down their network sessions. + * @NM_STATE_CONNECTING: A network connection is being started + * The graphical shell should indicate the network is being connected while + * the applications should still make no attempts to connect the network. + * @NM_STATE_CONNECTED_LOCAL: There is only local IPv4 and/or IPv6 connectivity, + * but no default route to access the Internet. The graphical shell should + * indicate no network connectivity. + * @NM_STATE_CONNECTED_SITE: There is only site-wide IPv4 and/or IPv6 connectivity. + * This means a default route is available, but the Internet connectivity check + * (see "Connectivity" property) did not succeed. The graphical shell should + * indicate limited network connectivity. + * @NM_STATE_CONNECTED_GLOBAL: There is global IPv4 and/or IPv6 Internet connectivity + * This means the Internet connectivity check succeeded, the graphical shell should + * indicate full network connectivity. + * + * #NMState values indicate the current overall networking state. + **/ +typedef enum { + NM_STATE_UNKNOWN = 0, + NM_STATE_ASLEEP = 10, + NM_STATE_DISCONNECTED = 20, + NM_STATE_DISCONNECTING = 30, + NM_STATE_CONNECTING = 40, + NM_STATE_CONNECTED_LOCAL = 50, + NM_STATE_CONNECTED_SITE = 60, + NM_STATE_CONNECTED_GLOBAL = 70, +} NMState; + +/** + * NMConnectivityState: + * @NM_CONNECTIVITY_UNKNOWN: Network connectivity is unknown. This means the + * connectivity checks are disabled (e.g. on server installations) or has + * not run yet. The graphical shell should assume the Internet connection + * might be available and not present a captive portal window. + * @NM_CONNECTIVITY_NONE: The host is not connected to any network. There's + * no active connection that contains a default route to the internet and + * thus it makes no sense to even attempt a connectivity check. The graphical + * shell should use this state to indicate the network connection is unavailable. + * @NM_CONNECTIVITY_PORTAL: The Internet connection is hijacked by a captive + * portal gateway. The graphical shell may open a sandboxed web browser window + * (because the captive portals typically attempt a man-in-the-middle attacks + * against the https connections) for the purpose of authenticating to a gateway + * and retrigger the connectivity check with CheckConnectivity() when the + * browser window is dismissed. + * @NM_CONNECTIVITY_LIMITED: The host is connected to a network, does not appear + * to be able to reach the full Internet, but a captive portal has not been + * detected. + * @NM_CONNECTIVITY_FULL: The host is connected to a network, and + * appears to be able to reach the full Internet. + */ +typedef enum { + NM_CONNECTIVITY_UNKNOWN = 0, + NM_CONNECTIVITY_NONE = 1, + NM_CONNECTIVITY_PORTAL = 2, + NM_CONNECTIVITY_LIMITED = 3, + NM_CONNECTIVITY_FULL = 4, +} NMConnectivityState; + +/** + * NMDeviceType: + * @NM_DEVICE_TYPE_UNKNOWN: unknown device + * @NM_DEVICE_TYPE_GENERIC: generic support for unrecognized device types + * @NM_DEVICE_TYPE_ETHERNET: a wired ethernet device + * @NM_DEVICE_TYPE_WIFI: an 802.11 Wi-Fi device + * @NM_DEVICE_TYPE_UNUSED1: not used + * @NM_DEVICE_TYPE_UNUSED2: not used + * @NM_DEVICE_TYPE_BT: a Bluetooth device supporting PAN or DUN access protocols + * @NM_DEVICE_TYPE_OLPC_MESH: an OLPC XO mesh networking device + * @NM_DEVICE_TYPE_WIMAX: an 802.16e Mobile WiMAX broadband device + * @NM_DEVICE_TYPE_MODEM: a modem supporting analog telephone, CDMA/EVDO, + * GSM/UMTS, or LTE network access protocols + * @NM_DEVICE_TYPE_INFINIBAND: an IP-over-InfiniBand device + * @NM_DEVICE_TYPE_BOND: a bond master interface + * @NM_DEVICE_TYPE_VLAN: an 802.1Q VLAN interface + * @NM_DEVICE_TYPE_ADSL: ADSL modem + * @NM_DEVICE_TYPE_BRIDGE: a bridge master interface + * @NM_DEVICE_TYPE_TEAM: a team master interface + * @NM_DEVICE_TYPE_TUN: a TUN or TAP interface + * @NM_DEVICE_TYPE_IP_TUNNEL: a IP tunnel interface + * @NM_DEVICE_TYPE_MACVLAN: a MACVLAN interface + * @NM_DEVICE_TYPE_VXLAN: a VXLAN interface + * @NM_DEVICE_TYPE_VETH: a VETH interface + * @NM_DEVICE_TYPE_MACSEC: a MACsec interface + * @NM_DEVICE_TYPE_DUMMY: a dummy interface + * @NM_DEVICE_TYPE_PPP: a PPP interface + * @NM_DEVICE_TYPE_OVS_INTERFACE: a Open vSwitch interface + * @NM_DEVICE_TYPE_OVS_PORT: a Open vSwitch port + * @NM_DEVICE_TYPE_OVS_BRIDGE: a Open vSwitch bridge + * @NM_DEVICE_TYPE_WPAN: a IEEE 802.15.4 (WPAN) MAC Layer Device + * @NM_DEVICE_TYPE_6LOWPAN: 6LoWPAN interface + * @NM_DEVICE_TYPE_WIREGUARD: a WireGuard interface + * @NM_DEVICE_TYPE_WIFI_P2P: an 802.11 Wi-Fi P2P device. Since: 1.16. + * @NM_DEVICE_TYPE_VRF: A VRF (Virtual Routing and Forwarding) interface. Since: 1.24. + * + * #NMDeviceType values indicate the type of hardware represented by a + * device object. + **/ +typedef enum { + NM_DEVICE_TYPE_UNKNOWN = 0, + NM_DEVICE_TYPE_ETHERNET = 1, + NM_DEVICE_TYPE_WIFI = 2, + NM_DEVICE_TYPE_UNUSED1 = 3, + NM_DEVICE_TYPE_UNUSED2 = 4, + NM_DEVICE_TYPE_BT = 5, /* Bluetooth */ + NM_DEVICE_TYPE_OLPC_MESH = 6, + NM_DEVICE_TYPE_WIMAX = 7, + NM_DEVICE_TYPE_MODEM = 8, + NM_DEVICE_TYPE_INFINIBAND = 9, + NM_DEVICE_TYPE_BOND = 10, + NM_DEVICE_TYPE_VLAN = 11, + NM_DEVICE_TYPE_ADSL = 12, + NM_DEVICE_TYPE_BRIDGE = 13, + NM_DEVICE_TYPE_GENERIC = 14, + NM_DEVICE_TYPE_TEAM = 15, + NM_DEVICE_TYPE_TUN = 16, + NM_DEVICE_TYPE_IP_TUNNEL = 17, + NM_DEVICE_TYPE_MACVLAN = 18, + NM_DEVICE_TYPE_VXLAN = 19, + NM_DEVICE_TYPE_VETH = 20, + NM_DEVICE_TYPE_MACSEC = 21, + NM_DEVICE_TYPE_DUMMY = 22, + NM_DEVICE_TYPE_PPP = 23, + NM_DEVICE_TYPE_OVS_INTERFACE = 24, + NM_DEVICE_TYPE_OVS_PORT = 25, + NM_DEVICE_TYPE_OVS_BRIDGE = 26, + NM_DEVICE_TYPE_WPAN = 27, + NM_DEVICE_TYPE_6LOWPAN = 28, + NM_DEVICE_TYPE_WIREGUARD = 29, + NM_DEVICE_TYPE_WIFI_P2P = 30, + NM_DEVICE_TYPE_VRF = 31, +} NMDeviceType; + +/** + * NMDeviceCapabilities: + * @NM_DEVICE_CAP_NONE: device has no special capabilities + * @NM_DEVICE_CAP_NM_SUPPORTED: NetworkManager supports this device + * @NM_DEVICE_CAP_CARRIER_DETECT: this device can indicate carrier status + * @NM_DEVICE_CAP_IS_SOFTWARE: this device is a software device + * @NM_DEVICE_CAP_SRIOV: this device supports single-root I/O virtualization + * + * General device capability flags. + **/ +typedef enum { /*< flags >*/ + NM_DEVICE_CAP_NONE = 0x00000000, + NM_DEVICE_CAP_NM_SUPPORTED = 0x00000001, + NM_DEVICE_CAP_CARRIER_DETECT = 0x00000002, + NM_DEVICE_CAP_IS_SOFTWARE = 0x00000004, + NM_DEVICE_CAP_SRIOV = 0x00000008, +} NMDeviceCapabilities; + +/** + * NMDeviceWifiCapabilities: + * @NM_WIFI_DEVICE_CAP_NONE: device has no encryption/authentication capabilities + * @NM_WIFI_DEVICE_CAP_CIPHER_WEP40: device supports 40/64-bit WEP encryption + * @NM_WIFI_DEVICE_CAP_CIPHER_WEP104: device supports 104/128-bit WEP encryption + * @NM_WIFI_DEVICE_CAP_CIPHER_TKIP: device supports TKIP encryption + * @NM_WIFI_DEVICE_CAP_CIPHER_CCMP: device supports AES/CCMP encryption + * @NM_WIFI_DEVICE_CAP_WPA: device supports WPA1 authentication + * @NM_WIFI_DEVICE_CAP_RSN: device supports WPA2/RSN authentication + * @NM_WIFI_DEVICE_CAP_AP: device supports Access Point mode + * @NM_WIFI_DEVICE_CAP_ADHOC: device supports Ad-Hoc mode + * @NM_WIFI_DEVICE_CAP_FREQ_VALID: device reports frequency capabilities + * @NM_WIFI_DEVICE_CAP_FREQ_2GHZ: device supports 2.4GHz frequencies + * @NM_WIFI_DEVICE_CAP_FREQ_5GHZ: device supports 5GHz frequencies + * @NM_WIFI_DEVICE_CAP_MESH: device supports acting as a mesh point. Since: 1.20. + * @NM_WIFI_DEVICE_CAP_IBSS_RSN: device supports WPA2/RSN in an IBSS network. Since: 1.22. + * + * 802.11 specific device encryption and authentication capabilities. + **/ +typedef enum { /*< flags >*/ + NM_WIFI_DEVICE_CAP_NONE = 0x00000000, + NM_WIFI_DEVICE_CAP_CIPHER_WEP40 = 0x00000001, + NM_WIFI_DEVICE_CAP_CIPHER_WEP104 = 0x00000002, + NM_WIFI_DEVICE_CAP_CIPHER_TKIP = 0x00000004, + NM_WIFI_DEVICE_CAP_CIPHER_CCMP = 0x00000008, + NM_WIFI_DEVICE_CAP_WPA = 0x00000010, + NM_WIFI_DEVICE_CAP_RSN = 0x00000020, + NM_WIFI_DEVICE_CAP_AP = 0x00000040, + NM_WIFI_DEVICE_CAP_ADHOC = 0x00000080, + NM_WIFI_DEVICE_CAP_FREQ_VALID = 0x00000100, + NM_WIFI_DEVICE_CAP_FREQ_2GHZ = 0x00000200, + NM_WIFI_DEVICE_CAP_FREQ_5GHZ = 0x00000400, + NM_WIFI_DEVICE_CAP_MESH = 0x00001000, + NM_WIFI_DEVICE_CAP_IBSS_RSN = 0x00002000, +} NMDeviceWifiCapabilities; + +/** + * NM80211ApFlags: + * @NM_802_11_AP_FLAGS_NONE: access point has no special capabilities + * @NM_802_11_AP_FLAGS_PRIVACY: access point requires authentication and + * encryption (usually means WEP) + * @NM_802_11_AP_FLAGS_WPS: access point supports some WPS method + * @NM_802_11_AP_FLAGS_WPS_PBC: access point supports push-button WPS + * @NM_802_11_AP_FLAGS_WPS_PIN: access point supports PIN-based WPS + * + * 802.11 access point flags. + **/ +typedef enum { /*< underscore_name=nm_802_11_ap_flags, flags >*/ + NM_802_11_AP_FLAGS_NONE = 0x00000000, + NM_802_11_AP_FLAGS_PRIVACY = 0x00000001, + NM_802_11_AP_FLAGS_WPS = 0x00000002, + NM_802_11_AP_FLAGS_WPS_PBC = 0x00000004, + NM_802_11_AP_FLAGS_WPS_PIN = 0x00000008, +} NM80211ApFlags; + +/** + * NM80211ApSecurityFlags: + * @NM_802_11_AP_SEC_NONE: the access point has no special security requirements + * @NM_802_11_AP_SEC_PAIR_WEP40: 40/64-bit WEP is supported for + * pairwise/unicast encryption + * @NM_802_11_AP_SEC_PAIR_WEP104: 104/128-bit WEP is supported for + * pairwise/unicast encryption + * @NM_802_11_AP_SEC_PAIR_TKIP: TKIP is supported for pairwise/unicast encryption + * @NM_802_11_AP_SEC_PAIR_CCMP: AES/CCMP is supported for pairwise/unicast encryption + * @NM_802_11_AP_SEC_GROUP_WEP40: 40/64-bit WEP is supported for group/broadcast + * encryption + * @NM_802_11_AP_SEC_GROUP_WEP104: 104/128-bit WEP is supported for + * group/broadcast encryption + * @NM_802_11_AP_SEC_GROUP_TKIP: TKIP is supported for group/broadcast encryption + * @NM_802_11_AP_SEC_GROUP_CCMP: AES/CCMP is supported for group/broadcast + * encryption + * @NM_802_11_AP_SEC_KEY_MGMT_PSK: WPA/RSN Pre-Shared Key encryption is + * supported + * @NM_802_11_AP_SEC_KEY_MGMT_802_1X: 802.1x authentication and key management + * is supported + * @NM_802_11_AP_SEC_KEY_MGMT_SAE: WPA/RSN Simultaneous Authentication of Equals is + * supported + * @NM_802_11_AP_SEC_KEY_MGMT_OWE: WPA/RSN Opportunistic Wireless Encryption is + * supported + * @NM_802_11_AP_SEC_KEY_MGMT_OWE_TM: WPA/RSN Opportunistic Wireless Encryption + * transition mode is supported. Since: 1.26. + * @NM_802_11_AP_SEC_KEY_MGMT_EAP_SUITE_B_192: WPA3 Enterprise Suite-B 192 bit mode + * is supported. Since: 1.30. + * + * 802.11 access point security and authentication flags. These flags describe + * the current security requirements of an access point as determined from the + * access point's beacon. + **/ +typedef enum { /*< underscore_name=nm_802_11_ap_security_flags, flags >*/ + NM_802_11_AP_SEC_NONE = 0x00000000, + NM_802_11_AP_SEC_PAIR_WEP40 = 0x00000001, + NM_802_11_AP_SEC_PAIR_WEP104 = 0x00000002, + NM_802_11_AP_SEC_PAIR_TKIP = 0x00000004, + NM_802_11_AP_SEC_PAIR_CCMP = 0x00000008, + NM_802_11_AP_SEC_GROUP_WEP40 = 0x00000010, + NM_802_11_AP_SEC_GROUP_WEP104 = 0x00000020, + NM_802_11_AP_SEC_GROUP_TKIP = 0x00000040, + NM_802_11_AP_SEC_GROUP_CCMP = 0x00000080, + NM_802_11_AP_SEC_KEY_MGMT_PSK = 0x00000100, + NM_802_11_AP_SEC_KEY_MGMT_802_1X = 0x00000200, + NM_802_11_AP_SEC_KEY_MGMT_SAE = 0x00000400, + NM_802_11_AP_SEC_KEY_MGMT_OWE = 0x00000800, + NM_802_11_AP_SEC_KEY_MGMT_OWE_TM = 0x00001000, + NM_802_11_AP_SEC_KEY_MGMT_EAP_SUITE_B_192 = 0x00002000, +} NM80211ApSecurityFlags; + +/** + * NM80211Mode: + * @NM_802_11_MODE_UNKNOWN: the device or access point mode is unknown + * @NM_802_11_MODE_ADHOC: for both devices and access point objects, indicates + * the object is part of an Ad-Hoc 802.11 network without a central + * coordinating access point. + * @NM_802_11_MODE_INFRA: the device or access point is in infrastructure mode. + * For devices, this indicates the device is an 802.11 client/station. For + * access point objects, this indicates the object is an access point that + * provides connectivity to clients. + * @NM_802_11_MODE_AP: the device is an access point/hotspot. Not valid for + * access point objects; used only for hotspot mode on the local machine. + * @NM_802_11_MODE_MESH: the device is a 802.11s mesh point. Since: 1.20. + * + * Indicates the 802.11 mode an access point or device is currently in. + **/ +typedef enum { /*< underscore_name=nm_802_11_mode >*/ + NM_802_11_MODE_UNKNOWN = 0, + NM_802_11_MODE_ADHOC = 1, + NM_802_11_MODE_INFRA = 2, + NM_802_11_MODE_AP = 3, + NM_802_11_MODE_MESH = 4, +} NM80211Mode; + +/** + * NMBluetoothCapabilities: + * @NM_BT_CAPABILITY_NONE: device has no usable capabilities + * @NM_BT_CAPABILITY_DUN: device provides Dial-Up Networking capability + * @NM_BT_CAPABILITY_NAP: device provides Network Access Point capability + * + * #NMBluetoothCapabilities values indicate the usable capabilities of a + * Bluetooth device. + **/ +typedef enum { /*< flags >*/ + NM_BT_CAPABILITY_NONE = 0x00000000, + NM_BT_CAPABILITY_DUN = 0x00000001, + NM_BT_CAPABILITY_NAP = 0x00000002, +} NMBluetoothCapabilities; + +/** + * NMDeviceModemCapabilities: + * @NM_DEVICE_MODEM_CAPABILITY_NONE: modem has no usable capabilities + * @NM_DEVICE_MODEM_CAPABILITY_POTS: modem uses the analog wired telephone + * network and is not a wireless/cellular device + * @NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO: modem supports at least one of CDMA + * 1xRTT, EVDO revision 0, EVDO revision A, or EVDO revision B + * @NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS: modem supports at least one of GSM, + * GPRS, EDGE, UMTS, HSDPA, HSUPA, or HSPA+ packet switched data capability + * @NM_DEVICE_MODEM_CAPABILITY_LTE: modem has LTE data capability + * + * #NMDeviceModemCapabilities values indicate the generic radio access + * technology families a modem device supports. For more information on the + * specific access technologies the device supports use the ModemManager D-Bus + * API. + **/ +typedef enum { /*< flags >*/ + NM_DEVICE_MODEM_CAPABILITY_NONE = 0x00000000, + NM_DEVICE_MODEM_CAPABILITY_POTS = 0x00000001, + NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO = 0x00000002, + NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS = 0x00000004, + NM_DEVICE_MODEM_CAPABILITY_LTE = 0x00000008, +} NMDeviceModemCapabilities; + +/** + * NMWimaxNspNetworkType: + * @NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN: unknown network type + * @NM_WIMAX_NSP_NETWORK_TYPE_HOME: home network + * @NM_WIMAX_NSP_NETWORK_TYPE_PARTNER: partner network + * @NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER: roaming partner network + * + * WiMAX network type. + */ +typedef enum { + NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN = 0, + NM_WIMAX_NSP_NETWORK_TYPE_HOME = 1, + NM_WIMAX_NSP_NETWORK_TYPE_PARTNER = 2, + NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER = 3, +} NMWimaxNspNetworkType; + +/** + * NMDeviceState: + * @NM_DEVICE_STATE_UNKNOWN: the device's state is unknown + * @NM_DEVICE_STATE_UNMANAGED: the device is recognized, but not managed by + * NetworkManager + * @NM_DEVICE_STATE_UNAVAILABLE: the device is managed by NetworkManager, but + * is not available for use. Reasons may include the wireless switched off, + * missing firmware, no ethernet carrier, missing supplicant or modem manager, + * etc. + * @NM_DEVICE_STATE_DISCONNECTED: the device can be activated, but is currently + * idle and not connected to a network. + * @NM_DEVICE_STATE_PREPARE: the device is preparing the connection to the + * network. This may include operations like changing the MAC address, + * setting physical link properties, and anything else required to connect + * to the requested network. + * @NM_DEVICE_STATE_CONFIG: the device is connecting to the requested network. + * This may include operations like associating with the Wi-Fi AP, dialing + * the modem, connecting to the remote Bluetooth device, etc. + * @NM_DEVICE_STATE_NEED_AUTH: the device requires more information to continue + * connecting to the requested network. This includes secrets like WiFi + * passphrases, login passwords, PIN codes, etc. + * @NM_DEVICE_STATE_IP_CONFIG: the device is requesting IPv4 and/or IPv6 + * addresses and routing information from the network. + * @NM_DEVICE_STATE_IP_CHECK: the device is checking whether further action is + * required for the requested network connection. This may include checking + * whether only local network access is available, whether a captive portal + * is blocking access to the Internet, etc. + * @NM_DEVICE_STATE_SECONDARIES: the device is waiting for a secondary + * connection (like a VPN) which must activated before the device can be + * activated + * @NM_DEVICE_STATE_ACTIVATED: the device has a network connection, either local + * or global. + * @NM_DEVICE_STATE_DEACTIVATING: a disconnection from the current network + * connection was requested, and the device is cleaning up resources used for + * that connection. The network connection may still be valid. + * @NM_DEVICE_STATE_FAILED: the device failed to connect to the requested + * network and is cleaning up the connection request + **/ +typedef enum { + NM_DEVICE_STATE_UNKNOWN = 0, + NM_DEVICE_STATE_UNMANAGED = 10, + NM_DEVICE_STATE_UNAVAILABLE = 20, + NM_DEVICE_STATE_DISCONNECTED = 30, + NM_DEVICE_STATE_PREPARE = 40, + NM_DEVICE_STATE_CONFIG = 50, + NM_DEVICE_STATE_NEED_AUTH = 60, + NM_DEVICE_STATE_IP_CONFIG = 70, + NM_DEVICE_STATE_IP_CHECK = 80, + NM_DEVICE_STATE_SECONDARIES = 90, + NM_DEVICE_STATE_ACTIVATED = 100, + NM_DEVICE_STATE_DEACTIVATING = 110, + NM_DEVICE_STATE_FAILED = 120, +} NMDeviceState; + +/** + * NMDeviceStateReason: + * @NM_DEVICE_STATE_REASON_NONE: No reason given + * @NM_DEVICE_STATE_REASON_UNKNOWN: Unknown error + * @NM_DEVICE_STATE_REASON_NOW_MANAGED: Device is now managed + * @NM_DEVICE_STATE_REASON_NOW_UNMANAGED: Device is now unmanaged + * @NM_DEVICE_STATE_REASON_CONFIG_FAILED: The device could not be readied for configuration + * @NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE: IP configuration could not be reserved (no available address, timeout, etc) + * @NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED: The IP config is no longer valid + * @NM_DEVICE_STATE_REASON_NO_SECRETS: Secrets were required, but not provided + * @NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT: 802.1x supplicant disconnected + * @NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED: 802.1x supplicant configuration failed + * @NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED: 802.1x supplicant failed + * @NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT: 802.1x supplicant took too long to authenticate + * @NM_DEVICE_STATE_REASON_PPP_START_FAILED: PPP service failed to start + * @NM_DEVICE_STATE_REASON_PPP_DISCONNECT: PPP service disconnected + * @NM_DEVICE_STATE_REASON_PPP_FAILED: PPP failed + * @NM_DEVICE_STATE_REASON_DHCP_START_FAILED: DHCP client failed to start + * @NM_DEVICE_STATE_REASON_DHCP_ERROR: DHCP client error + * @NM_DEVICE_STATE_REASON_DHCP_FAILED: DHCP client failed + * @NM_DEVICE_STATE_REASON_SHARED_START_FAILED: Shared connection service failed to start + * @NM_DEVICE_STATE_REASON_SHARED_FAILED: Shared connection service failed + * @NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED: AutoIP service failed to start + * @NM_DEVICE_STATE_REASON_AUTOIP_ERROR: AutoIP service error + * @NM_DEVICE_STATE_REASON_AUTOIP_FAILED: AutoIP service failed + * @NM_DEVICE_STATE_REASON_MODEM_BUSY: The line is busy + * @NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE: No dial tone + * @NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER: No carrier could be established + * @NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT: The dialing request timed out + * @NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED: The dialing attempt failed + * @NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED: Modem initialization failed + * @NM_DEVICE_STATE_REASON_GSM_APN_FAILED: Failed to select the specified APN + * @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING: Not searching for networks + * @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED: Network registration denied + * @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT: Network registration timed out + * @NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED: Failed to register with the requested network + * @NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED: PIN check failed + * @NM_DEVICE_STATE_REASON_FIRMWARE_MISSING: Necessary firmware for the device may be missing + * @NM_DEVICE_STATE_REASON_REMOVED: The device was removed + * @NM_DEVICE_STATE_REASON_SLEEPING: NetworkManager went to sleep + * @NM_DEVICE_STATE_REASON_CONNECTION_REMOVED: The device's active connection disappeared + * @NM_DEVICE_STATE_REASON_USER_REQUESTED: Device disconnected by user or client + * @NM_DEVICE_STATE_REASON_CARRIER: Carrier/link changed + * @NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED: The device's existing connection was assumed + * @NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE: The supplicant is now available + * @NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND: The modem could not be found + * @NM_DEVICE_STATE_REASON_BT_FAILED: The Bluetooth connection failed or timed out + * @NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED: GSM Modem's SIM Card not inserted + * @NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED: GSM Modem's SIM Pin required + * @NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED: GSM Modem's SIM Puk required + * @NM_DEVICE_STATE_REASON_GSM_SIM_WRONG: GSM Modem's SIM wrong + * @NM_DEVICE_STATE_REASON_INFINIBAND_MODE: InfiniBand device does not support connected mode + * @NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED: A dependency of the connection failed + * @NM_DEVICE_STATE_REASON_BR2684_FAILED: Problem with the RFC 2684 Ethernet over ADSL bridge + * @NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE: ModemManager not running + * @NM_DEVICE_STATE_REASON_SSID_NOT_FOUND: The Wi-Fi network could not be found + * @NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED: A secondary connection of the base connection failed + * @NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED: DCB or FCoE setup failed + * @NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED: teamd control failed + * @NM_DEVICE_STATE_REASON_MODEM_FAILED: Modem failed or no longer available + * @NM_DEVICE_STATE_REASON_MODEM_AVAILABLE: Modem now ready and available + * @NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT: SIM PIN was incorrect + * @NM_DEVICE_STATE_REASON_NEW_ACTIVATION: New connection activation was enqueued + * @NM_DEVICE_STATE_REASON_PARENT_CHANGED: the device's parent changed + * @NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED: the device parent's management changed + * @NM_DEVICE_STATE_REASON_OVSDB_FAILED: problem communicating with Open vSwitch database + * @NM_DEVICE_STATE_REASON_IP_ADDRESS_DUPLICATE: a duplicate IP address was detected + * @NM_DEVICE_STATE_REASON_IP_METHOD_UNSUPPORTED: The selected IP method is not supported + * @NM_DEVICE_STATE_REASON_SRIOV_CONFIGURATION_FAILED: configuration of SR-IOV parameters failed + * @NM_DEVICE_STATE_REASON_PEER_NOT_FOUND: The Wi-Fi P2P peer could not be found + * + * Device state change reason codes + */ +typedef enum { + NM_DEVICE_STATE_REASON_NONE = 0, + NM_DEVICE_STATE_REASON_UNKNOWN = 1, + NM_DEVICE_STATE_REASON_NOW_MANAGED = 2, + NM_DEVICE_STATE_REASON_NOW_UNMANAGED = 3, + NM_DEVICE_STATE_REASON_CONFIG_FAILED = 4, + NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE = 5, + NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED = 6, + NM_DEVICE_STATE_REASON_NO_SECRETS = 7, + NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT = 8, + NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED = 9, + NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED = 10, + NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT = 11, + NM_DEVICE_STATE_REASON_PPP_START_FAILED = 12, + NM_DEVICE_STATE_REASON_PPP_DISCONNECT = 13, + NM_DEVICE_STATE_REASON_PPP_FAILED = 14, + NM_DEVICE_STATE_REASON_DHCP_START_FAILED = 15, + NM_DEVICE_STATE_REASON_DHCP_ERROR = 16, + NM_DEVICE_STATE_REASON_DHCP_FAILED = 17, + NM_DEVICE_STATE_REASON_SHARED_START_FAILED = 18, + NM_DEVICE_STATE_REASON_SHARED_FAILED = 19, + NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED = 20, + NM_DEVICE_STATE_REASON_AUTOIP_ERROR = 21, + NM_DEVICE_STATE_REASON_AUTOIP_FAILED = 22, + NM_DEVICE_STATE_REASON_MODEM_BUSY = 23, + NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE = 24, + NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER = 25, + NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT = 26, + NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED = 27, + NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED = 28, + NM_DEVICE_STATE_REASON_GSM_APN_FAILED = 29, + NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING = 30, + NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED = 31, + NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT = 32, + NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED = 33, + NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED = 34, + NM_DEVICE_STATE_REASON_FIRMWARE_MISSING = 35, + NM_DEVICE_STATE_REASON_REMOVED = 36, + NM_DEVICE_STATE_REASON_SLEEPING = 37, + NM_DEVICE_STATE_REASON_CONNECTION_REMOVED = 38, + NM_DEVICE_STATE_REASON_USER_REQUESTED = 39, + NM_DEVICE_STATE_REASON_CARRIER = 40, + NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED = 41, + NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE = 42, + NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND = 43, + NM_DEVICE_STATE_REASON_BT_FAILED = 44, + NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED = 45, + NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED = 46, + NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED = 47, + NM_DEVICE_STATE_REASON_GSM_SIM_WRONG = 48, + NM_DEVICE_STATE_REASON_INFINIBAND_MODE = 49, + NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED = 50, + NM_DEVICE_STATE_REASON_BR2684_FAILED = 51, + NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE = 52, + NM_DEVICE_STATE_REASON_SSID_NOT_FOUND = 53, + NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED = 54, + NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED = 55, + NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED = 56, + NM_DEVICE_STATE_REASON_MODEM_FAILED = 57, + NM_DEVICE_STATE_REASON_MODEM_AVAILABLE = 58, + NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT = 59, + NM_DEVICE_STATE_REASON_NEW_ACTIVATION = 60, + NM_DEVICE_STATE_REASON_PARENT_CHANGED = 61, + NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED = 62, + NM_DEVICE_STATE_REASON_OVSDB_FAILED = 63, + NM_DEVICE_STATE_REASON_IP_ADDRESS_DUPLICATE = 64, + NM_DEVICE_STATE_REASON_IP_METHOD_UNSUPPORTED = 65, + NM_DEVICE_STATE_REASON_SRIOV_CONFIGURATION_FAILED = 66, + NM_DEVICE_STATE_REASON_PEER_NOT_FOUND = 67, +} NMDeviceStateReason; + +/** + * NMMetered: + * @NM_METERED_UNKNOWN: The metered status is unknown + * @NM_METERED_YES: Metered, the value was explicitly configured + * @NM_METERED_NO: Not metered, the value was explicitly configured + * @NM_METERED_GUESS_YES: Metered, the value was guessed + * @NM_METERED_GUESS_NO: Not metered, the value was guessed + * + * The NMMetered enum has two different purposes: one is to configure + * "connection.metered" setting of a connection profile in #NMSettingConnection, and + * the other is to express the actual metered state of the #NMDevice at a given moment. + * + * For the connection profile only #NM_METERED_UNKNOWN, #NM_METERED_NO + * and #NM_METERED_YES are allowed. + * + * The device's metered state at runtime is determined by the profile + * which is currently active. If the profile explicitly specifies #NM_METERED_NO + * or #NM_METERED_YES, then the device's metered state is as such. + * If the connection profile leaves it undecided at #NM_METERED_UNKNOWN (the default), + * then NetworkManager tries to guess the metered state, for example based on the + * device type or on DHCP options (like Android devices exposing a "ANDROID_METERED" + * DHCP vendor option). This then leads to either #NM_METERED_GUESS_NO or #NM_METERED_GUESS_YES. + * + * Most applications probably should treat the runtime state #NM_METERED_GUESS_YES + * like #NM_METERED_YES, and all other states as not metered. + * + * Note that the per-device metered states are then combined to a global metered + * state. This is basically the metered state of the device with the best default + * route. However, that generalization of a global metered state may not be correct + * if the default routes for IPv4 and IPv6 are on different devices, or if policy + * routing is configured. In general, the global metered state tries to express whether + * the traffic is likely metered, but since that depends on the traffic itself, + * there is not one answer in all cases. Hence, an application may want to consider + * the per-device's metered states. + * + * Since: 1.2 + **/ +NM_AVAILABLE_IN_1_2 +typedef enum { + NM_METERED_UNKNOWN = 0, + NM_METERED_YES = 1, + NM_METERED_NO = 2, + NM_METERED_GUESS_YES = 3, + NM_METERED_GUESS_NO = 4, +} NMMetered; + +/** + * NMConnectionMultiConnect: + * @NM_CONNECTION_MULTI_CONNECT_DEFAULT: indicates that the per-connection + * setting is unspecified. In this case, it will fallback to the default + * value, which is %NM_CONNECTION_MULTI_CONNECT_SINGLE. + * @NM_CONNECTION_MULTI_CONNECT_SINGLE: the connection profile can only + * be active once at each moment. Activating a profile that is already active, + * will first deactivate it. + * @NM_CONNECTION_MULTI_CONNECT_MANUAL_MULTIPLE: the profile can + * be manually activated multiple times on different devices. However, + * regarding autoconnect, the profile will autoconnect only if it is + * currently not connected otherwise. + * @NM_CONNECTION_MULTI_CONNECT_MULTIPLE: the profile can autoactivate + * and be manually activated multiple times together. + * + * Since: 1.14 + */ +typedef enum { + NM_CONNECTION_MULTI_CONNECT_DEFAULT = 0, + NM_CONNECTION_MULTI_CONNECT_SINGLE = 1, + NM_CONNECTION_MULTI_CONNECT_MANUAL_MULTIPLE = 2, + NM_CONNECTION_MULTI_CONNECT_MULTIPLE = 3, +} NMConnectionMultiConnect; + +/** + * NMActiveConnectionState: + * @NM_ACTIVE_CONNECTION_STATE_UNKNOWN: the state of the connection is unknown + * @NM_ACTIVE_CONNECTION_STATE_ACTIVATING: a network connection is being prepared + * @NM_ACTIVE_CONNECTION_STATE_ACTIVATED: there is a connection to the network + * @NM_ACTIVE_CONNECTION_STATE_DEACTIVATING: the network connection is being + * torn down and cleaned up + * @NM_ACTIVE_CONNECTION_STATE_DEACTIVATED: the network connection is disconnected + * and will be removed + * + * #NMActiveConnectionState values indicate the state of a connection to a + * specific network while it is starting, connected, or disconnecting from that + * network. + **/ +typedef enum { + NM_ACTIVE_CONNECTION_STATE_UNKNOWN = 0, + NM_ACTIVE_CONNECTION_STATE_ACTIVATING = 1, + NM_ACTIVE_CONNECTION_STATE_ACTIVATED = 2, + NM_ACTIVE_CONNECTION_STATE_DEACTIVATING = 3, + NM_ACTIVE_CONNECTION_STATE_DEACTIVATED = 4, +} NMActiveConnectionState; + +/** + * NMActiveConnectionStateReason: + * @NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN: The reason for the active connection + * state change is unknown. + * @NM_ACTIVE_CONNECTION_STATE_REASON_NONE: No reason was given for the active + * connection state change. + * @NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED: The active connection changed + * state because the user disconnected it. + * @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED: The active connection + * changed state because the device it was using was disconnected. + * @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED: The service providing the + * VPN connection was stopped. + * @NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID: The IP config of the active + * connection was invalid. + * @NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT: The connection attempt to + * the VPN service timed out. + * @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT: A timeout occurred + * while starting the service providing the VPN connection. + * @NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED: Starting the service + * providing the VPN connection failed. + * @NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS: Necessary secrets for the + * connection were not provided. + * @NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED: Authentication to the + * server failed. + * @NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED: The connection was + * deleted from settings. + * @NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED: Master connection of this + * connection failed to activate. + * @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED: Could not create the + * software device link. + * @NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED: The device this connection + * depended on disappeared. + * + * Active connection state reasons. + * + * Since: 1.8 + */ +NM_AVAILABLE_IN_1_8 +typedef enum { + NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN = 0, + NM_ACTIVE_CONNECTION_STATE_REASON_NONE = 1, + NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED = 2, + NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED = 3, + NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED = 4, + NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID = 5, + NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT = 6, + NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT = 7, + NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED = 8, + NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS = 9, + NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED = 10, + NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED = 11, + NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED = 12, + NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED = 13, + NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED = 14, +} NMActiveConnectionStateReason; + +/** + * NMSecretAgentGetSecretsFlags: + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE: no special behavior; by default no + * user interaction is allowed and requests for secrets are fulfilled from + * persistent storage, or if no secrets are available an error is returned. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION: allows the request to + * interact with the user, possibly prompting via UI for secrets if any are + * required, or if none are found in persistent storage. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW: explicitly prompt for new + * secrets from the user. This flag signals that NetworkManager thinks any + * existing secrets are invalid or wrong. This flag implies that interaction + * is allowed. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED: set if the request was + * initiated by user-requested action via the D-Bus interface, as opposed to + * automatically initiated by NetworkManager in response to (for example) scan + * results or carrier changes. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE: indicates that WPS enrollment + * is active with PBC method. The agent may suggest that the user pushes a button + * on the router instead of supplying a PSK. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM: Internal flag, not part of + * the D-Bus API. + * @NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS: Internal flag, not part of + * the D-Bus API. + * + * #NMSecretAgentGetSecretsFlags values modify the behavior of a GetSecrets request. + */ +typedef enum { /*< flags >*/ + NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE = 0x0, + NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION = 0x1, + NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW = 0x2, + NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED = 0x4, + NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE = 0x8, + + /* Internal to NM; not part of the D-Bus API */ + NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM = 0x80000000, + NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS = 0x40000000, +} NMSecretAgentGetSecretsFlags; + +/** + * NMSecretAgentCapabilities: + * @NM_SECRET_AGENT_CAPABILITY_NONE: the agent supports no special capabilities + * @NM_SECRET_AGENT_CAPABILITY_VPN_HINTS: the agent supports passing hints to + * VPN plugin authentication dialogs. + * @NM_SECRET_AGENT_CAPABILITY_LAST: bounds checking value; should not be used. + * + * #NMSecretAgentCapabilities indicate various capabilities of the agent. + */ +typedef enum /*< flags >*/ { + NM_SECRET_AGENT_CAPABILITY_NONE = 0x0, + NM_SECRET_AGENT_CAPABILITY_VPN_HINTS = 0x1, + + /* boundary value */ + NM_SECRET_AGENT_CAPABILITY_LAST = NM_SECRET_AGENT_CAPABILITY_VPN_HINTS, +} NMSecretAgentCapabilities; + +#ifndef NM_VERSION_H + #undef NM_AVAILABLE_IN_1_2 + #undef NM_AVAILABLE_IN_1_8 +#endif + +#define NM_LLDP_ATTR_RAW "raw" +#define NM_LLDP_ATTR_DESTINATION "destination" +#define NM_LLDP_ATTR_CHASSIS_ID_TYPE "chassis-id-type" +#define NM_LLDP_ATTR_CHASSIS_ID "chassis-id" +#define NM_LLDP_ATTR_PORT_ID_TYPE "port-id-type" +#define NM_LLDP_ATTR_PORT_ID "port-id" +#define NM_LLDP_ATTR_PORT_DESCRIPTION "port-description" +#define NM_LLDP_ATTR_SYSTEM_NAME "system-name" +#define NM_LLDP_ATTR_SYSTEM_DESCRIPTION "system-description" +#define NM_LLDP_ATTR_SYSTEM_CAPABILITIES "system-capabilities" +#define NM_LLDP_ATTR_MANAGEMENT_ADDRESSES "management-addresses" + +#define NM_LLDP_ATTR_IEEE_802_1_PVID "ieee-802-1-pvid" +#define NM_LLDP_ATTR_IEEE_802_1_VLANS "ieee-802-1-vlans" +#define NM_LLDP_ATTR_IEEE_802_1_PPVIDS "ieee-802-1-ppvids" + +#define NM_LLDP_ATTR_IEEE_802_3_MAC_PHY_CONF "ieee-802-3-mac-phy-conf" +#define NM_LLDP_ATTR_IEEE_802_3_POWER_VIA_MDI "ieee-802-3-power-via-mdi" +#define NM_LLDP_ATTR_IEEE_802_3_MAX_FRAME_SIZE "ieee-802-3-max-frame-size" + +#define NM_LLDP_ATTR_MUD_URL "mud-url" + +/* These are deprecated in favor of NM_LLDP_ATTR_IEEE_802_1_VLANS, + * which can report multiple VLANs */ +#define NM_LLDP_ATTR_IEEE_802_1_VID "ieee-802-1-vid" +#define NM_LLDP_ATTR_IEEE_802_1_VLAN_NAME "ieee-802-1-vlan-name" + +/* These are deprecated in favor of NM_LLDP_ATTR_IEEE_802_1_PPVIDS, + * which can report multiple PPVIDs */ +#define NM_LLDP_ATTR_IEEE_802_1_PPVID "ieee-802-1-ppvid" +#define NM_LLDP_ATTR_IEEE_802_1_PPVID_FLAGS "ieee-802-1-ppvid-flags" + +#define NM_LLDP_DEST_NEAREST_BRIDGE "nearest-bridge" +#define NM_LLDP_DEST_NEAREST_NON_TPMR_BRIDGE "nearest-non-tpmr-bridge" +#define NM_LLDP_DEST_NEAREST_CUSTOMER_BRIDGE "nearest-customer-bridge" + +/** + * NMIPTunnelMode: + * @NM_IP_TUNNEL_MODE_UNKNOWN: Unknown/unset tunnel mode + * @NM_IP_TUNNEL_MODE_IPIP: IP in IP tunnel + * @NM_IP_TUNNEL_MODE_GRE: GRE tunnel + * @NM_IP_TUNNEL_MODE_SIT: SIT tunnel + * @NM_IP_TUNNEL_MODE_ISATAP: ISATAP tunnel + * @NM_IP_TUNNEL_MODE_VTI: VTI tunnel + * @NM_IP_TUNNEL_MODE_IP6IP6: IPv6 in IPv6 tunnel + * @NM_IP_TUNNEL_MODE_IPIP6: IPv4 in IPv6 tunnel + * @NM_IP_TUNNEL_MODE_IP6GRE: IPv6 GRE tunnel + * @NM_IP_TUNNEL_MODE_VTI6: IPv6 VTI tunnel + * @NM_IP_TUNNEL_MODE_GRETAP: GRETAP tunnel + * @NM_IP_TUNNEL_MODE_IP6GRETAP: IPv6 GRETAP tunnel + * + * The tunneling mode. + * + * Since: 1.2 + */ +typedef enum { + NM_IP_TUNNEL_MODE_UNKNOWN = 0, + NM_IP_TUNNEL_MODE_IPIP = 1, + NM_IP_TUNNEL_MODE_GRE = 2, + NM_IP_TUNNEL_MODE_SIT = 3, + NM_IP_TUNNEL_MODE_ISATAP = 4, + NM_IP_TUNNEL_MODE_VTI = 5, + NM_IP_TUNNEL_MODE_IP6IP6 = 6, + NM_IP_TUNNEL_MODE_IPIP6 = 7, + NM_IP_TUNNEL_MODE_IP6GRE = 8, + NM_IP_TUNNEL_MODE_VTI6 = 9, + NM_IP_TUNNEL_MODE_GRETAP = 10, + NM_IP_TUNNEL_MODE_IP6GRETAP = 11, +} NMIPTunnelMode; + +/** + * NMCheckpointCreateFlags: + * @NM_CHECKPOINT_CREATE_FLAG_NONE: no flags + * @NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL: when creating + * a new checkpoint, destroy all existing ones. + * @NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS: upon rollback, + * delete any new connection added after the checkpoint. Since: 1.6. + * @NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES: upon rollback, + * disconnect any new device appeared after the checkpoint. Since: 1.6. + * @NM_CHECKPOINT_CREATE_FLAG_ALLOW_OVERLAPPING: by default, creating + * a checkpoint fails if there are already existing checkoints that + * reference the same devices. With this flag, creation of such + * checkpoints is allowed, however, if an older checkpoint + * that references overlapping devices gets rolled back, it will + * automatically destroy this checkpoint during rollback. This + * allows to create several overlapping checkpoints in parallel, + * and rollback to them at will. With the special case that + * rolling back to an older checkpoint will invalidate all + * overlapping younger checkpoints. This opts-in that the + * checkpoint can be automatically destroyed by the rollback + * of an older checkpoint. Since: 1.12. + * + * The flags for CheckpointCreate call + * + * Since: 1.4 (gi flags generated since 1.12) + */ +typedef enum { /*< flags >*/ + NM_CHECKPOINT_CREATE_FLAG_NONE = 0, + NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL = 0x01, + NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS = 0x02, + NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES = 0x04, + NM_CHECKPOINT_CREATE_FLAG_ALLOW_OVERLAPPING = 0x08, +} NMCheckpointCreateFlags; + +/** + * NMRollbackResult: + * @NM_ROLLBACK_RESULT_OK: the rollback succeeded. + * @NM_ROLLBACK_RESULT_ERR_NO_DEVICE: the device no longer exists. + * @NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED: the device is now unmanaged. + * @NM_ROLLBACK_RESULT_ERR_FAILED: other errors during rollback. + * + * The result of a checkpoint Rollback() operation for a specific device. + * + * Since: 1.4 + **/ +typedef enum { /*< skip >*/ + NM_ROLLBACK_RESULT_OK = 0, + NM_ROLLBACK_RESULT_ERR_NO_DEVICE = 1, + NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED = 2, + NM_ROLLBACK_RESULT_ERR_FAILED = 3, +} NMRollbackResult; + +/** + * NMSettingsConnectionFlags: + * @NM_SETTINGS_CONNECTION_FLAG_NONE: an alias for numeric zero, no flags set. + * @NM_SETTINGS_CONNECTION_FLAG_UNSAVED: the connection is not saved to disk. + * That either means, that the connection is in-memory only and currently + * is not backed by a file. Or, that the connection is backed by a file, + * but has modifications in-memory that were not persisted to disk. + * @NM_SETTINGS_CONNECTION_FLAG_NM_GENERATED: A connection is "nm-generated" if + * it was generated by NetworkManger. If the connection gets modified or saved + * by the user, the flag gets cleared. A nm-generated is also unsaved + * and has no backing file as it is in-memory only. + * @NM_SETTINGS_CONNECTION_FLAG_VOLATILE: The connection will be deleted + * when it disconnects. That is for in-memory connections (unsaved), which are + * currently active but deleted on disconnect. Volatile connections are + * always unsaved, but they are also no backing file on disk and are entirely + * in-memory only. + * @NM_SETTINGS_CONNECTION_FLAG_EXTERNAL: the profile was generated to represent + * an external configuration of a networking device. Since: 1.26. + * + * Flags describing the current activation state. + * + * Since: 1.12 + **/ +typedef enum { /*< flags >*/ + NM_SETTINGS_CONNECTION_FLAG_NONE = 0, + NM_SETTINGS_CONNECTION_FLAG_UNSAVED = 0x01, + NM_SETTINGS_CONNECTION_FLAG_NM_GENERATED = 0x02, + NM_SETTINGS_CONNECTION_FLAG_VOLATILE = 0x04, + NM_SETTINGS_CONNECTION_FLAG_EXTERNAL = 0x08, +} NMSettingsConnectionFlags; + +/** + * NMActivationStateFlags: + * @NM_ACTIVATION_STATE_FLAG_NONE: an alias for numeric zero, no flags set. + * @NM_ACTIVATION_STATE_FLAG_IS_MASTER: the device is a master. + * @NM_ACTIVATION_STATE_FLAG_IS_SLAVE: the device is a slave. + * @NM_ACTIVATION_STATE_FLAG_LAYER2_READY: layer2 is activated and ready. + * @NM_ACTIVATION_STATE_FLAG_IP4_READY: IPv4 setting is completed. + * @NM_ACTIVATION_STATE_FLAG_IP6_READY: IPv6 setting is completed. + * @NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES: The master has any slave devices attached. + * This only makes sense if the device is a master. + * @NM_ACTIVATION_STATE_FLAG_LIFETIME_BOUND_TO_PROFILE_VISIBILITY: the lifetime + * of the activation is bound to the visibility of the connection profile, + * which in turn depends on "connection.permissions" and whether a session + * for the user exists. Since: 1.16. + * @NM_ACTIVATION_STATE_FLAG_EXTERNAL: the active connection was generated to + * represent an external configuration of a networking device. Since: 1.26. + * + * Flags describing the current activation state. + * + * Since: 1.10 + **/ +typedef enum { /*< flags >*/ + NM_ACTIVATION_STATE_FLAG_NONE = 0, + + NM_ACTIVATION_STATE_FLAG_IS_MASTER = 0x1, + NM_ACTIVATION_STATE_FLAG_IS_SLAVE = 0x2, + NM_ACTIVATION_STATE_FLAG_LAYER2_READY = 0x4, + NM_ACTIVATION_STATE_FLAG_IP4_READY = 0x8, + NM_ACTIVATION_STATE_FLAG_IP6_READY = 0x10, + NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES = 0x20, + NM_ACTIVATION_STATE_FLAG_LIFETIME_BOUND_TO_PROFILE_VISIBILITY = 0x40, + NM_ACTIVATION_STATE_FLAG_EXTERNAL = 0x80, +} NMActivationStateFlags; + +/** + * NMSettingsAddConnection2Flags: + * @NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE: an alias for numeric zero, no flags set. + * @NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK: to persist the connection to disk. + * @NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY: to make the connection in-memory only. + * @NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT: usually, when the connection + * has autoconnect enabled and gets added, it becomes eligible to autoconnect + * right away. Setting this flag, disables autoconnect until the connection + * is manually activated. + * + * Numeric flags for the "flags" argument of AddConnection2() D-Bus API. + * + * Since: 1.20 + */ +typedef enum { /*< flags >*/ + NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE = 0, + NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK = 0x1, + NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY = 0x2, + NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT = 0x20, +} NMSettingsAddConnection2Flags; + +/** + * NMSettingsUpdate2Flags: + * @NM_SETTINGS_UPDATE2_FLAG_NONE: an alias for numeric zero, no flags set. + * @NM_SETTINGS_UPDATE2_FLAG_TO_DISK: to persist the connection to disk. + * @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY: makes the profile in-memory. + * Note that such profiles are stored in keyfile format under /run. + * If the file is already in-memory, the file in /run is updated in-place. + * Otherwise, the previous storage for the profile is left unchanged + * on disk, and the in-memory copy shadows it. + * Note that the original filename of the previous persistent storage (if any) + * is remembered. That means, when later persisting the profile again to disk, + * the file on disk will be overwritten again. + * Likewise, when finally deleting the profile, both the storage from /run + * and persistent storage are deleted (or if the persistent storage does not + * allow deletion, and nmmeta file is written to mark the UUID as deleted). + * @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED: this is almost the same + * as %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, with one difference: when later deleting + * the profile, the original profile will not be deleted. Instead a nmmeta + * file is written to /run to indicate that the profile is gone. + * Note that if such a nmmeta tombstone file exists and hides a file in persistent + * storage, then when re-adding the profile with the same UUID, then the original + * storage is taken over again. + * @NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY: this is like %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, + * but if the connection has a corresponding file on persistent storage, the file + * will be deleted right away. If the profile is later again persisted to disk, + * a new, unused filename will be chosen. + * @NM_SETTINGS_UPDATE2_FLAG_VOLATILE: This can be specified with either + * %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY, %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED + * or %NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY. + * After making the connection in-memory only, the connection is marked + * as volatile. That means, if the connection is currently not active + * it will be deleted right away. Otherwise, it is marked to for deletion + * once the connection deactivates. A volatile connection cannot autoactivate + * again (because it's about to be deleted), but a manual activation will + * clear the volatile flag. + * @NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT: usually, when the connection + * has autoconnect enabled and is modified, it becomes eligible to autoconnect + * right away. Setting this flag, disables autoconnect until the connection + * is manually activated. + * @NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY: when a profile gets modified that is + * currently active, then these changes don't take effect for the active + * device unless the profile gets reactivated or the configuration reapplied. + * There are two exceptions: by default "connection.zone" and "connection.metered" + * properties take effect immediately. Specify this flag to prevent these + * properties to take effect, so that the change is restricted to modify + * the profile. Since: 1.20. + * + * Since: 1.12 + */ +typedef enum { /*< flags >*/ + NM_SETTINGS_UPDATE2_FLAG_NONE = 0, + NM_SETTINGS_UPDATE2_FLAG_TO_DISK = 0x1, + NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY = 0x2, + NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED = 0x4, + NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY = 0x8, + NM_SETTINGS_UPDATE2_FLAG_VOLATILE = 0x10, + NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT = 0x20, + NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY = 0x40, +} NMSettingsUpdate2Flags; + +/** + * NMTernary: + * @NM_TERNARY_DEFAULT: use the globally-configured default value. + * @NM_TERNARY_FALSE: the option is disabled. + * @NM_TERNARY_TRUE: the option is enabled. + * + * An boolean value that can be overridden by a default. + * + * Since: 1.14 + **/ +typedef enum { + NM_TERNARY_DEFAULT = -1, + NM_TERNARY_FALSE = 0, + NM_TERNARY_TRUE = 1, +} NMTernary; + +/** + * NMManagerReloadFlags: + * @NM_MANAGER_RELOAD_FLAG_NONE: an alias for numeric zero, no flags set. This + * reloads everything that is supported and is identical to a SIGHUP. + * @NM_MANAGER_RELOAD_FLAG_CONF: reload the NetworkManager.conf configuration + * from disk. Note that this does not include connections, which can be + * reloaded via Setting's ReloadConnections(). + * @NM_MANAGER_RELOAD_FLAG_DNS_RC: update DNS configuration, which usually + * involves writing /etc/resolv.conf anew. + * @NM_MANAGER_RELOAD_FLAG_DNS_FULL: means to restart the DNS plugin. This + * is for example useful when using dnsmasq plugin, which uses additional + * configuration in /etc/NetworkManager/dnsmasq.d. If you edit those files, + * you can restart the DNS plugin. This action shortly interrupts name + * resolution. + * @NM_MANAGER_RELOAD_FLAG_ALL: all flags. + * + * Flags for the manager Reload() call. + * + * Since: 1.22 + */ +typedef enum { /*< flags >*/ + NM_MANAGER_RELOAD_FLAG_NONE = 0, /*< skip >*/ + NM_MANAGER_RELOAD_FLAG_CONF = 0x1, + NM_MANAGER_RELOAD_FLAG_DNS_RC = 0x2, + NM_MANAGER_RELOAD_FLAG_DNS_FULL = 0x4, + NM_MANAGER_RELOAD_FLAG_ALL = 0x7, /*< skip >*/ +} NMManagerReloadFlags; + +/** + * NMDeviceInterfaceFlags: + * @NM_DEVICE_INTERFACE_FLAG_NONE: an alias for numeric zero, no flags set. + * @NM_DEVICE_INTERFACE_FLAG_UP: the interface is enabled from the + * administrative point of view. Corresponds to kernel IFF_UP. + * @NM_DEVICE_INTERFACE_FLAG_LOWER_UP: the physical link is up. Corresponds + * to kernel IFF_LOWER_UP. + * @NM_DEVICE_INTERFACE_FLAG_PROMISC: receive all packets. Corresponds to + * kernel IFF_PROMISC. Since: 1.32. + * @NM_DEVICE_INTERFACE_FLAG_CARRIER: the interface has carrier. In most + * cases this is equal to the value of @NM_DEVICE_INTERFACE_FLAG_LOWER_UP. + * However some devices have a non-standard carrier detection mechanism. + * @NM_DEVICE_INTERFACE_FLAG_LLDP_CLIENT_ENABLED: the flag to indicate device + * LLDP status. Since: 1.32. + * + * Flags for a network interface. + * + * Since: 1.22 + */ +typedef enum { /*< flags >*/ + /* kernel flags */ + NM_DEVICE_INTERFACE_FLAG_NONE = 0, /*< skip >*/ + NM_DEVICE_INTERFACE_FLAG_UP = 0x1, + NM_DEVICE_INTERFACE_FLAG_LOWER_UP = 0x2, + NM_DEVICE_INTERFACE_FLAG_PROMISC = 0x4, + /* NM-specific flags */ + NM_DEVICE_INTERFACE_FLAG_CARRIER = 0x10000, + NM_DEVICE_INTERFACE_FLAG_LLDP_CLIENT_ENABLED = 0x20000, +} NMDeviceInterfaceFlags; + +/** + * NMClientPermission: + * @NM_CLIENT_PERMISSION_NONE: unknown or no permission + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_NETWORK: controls whether networking + * can be globally enabled or disabled + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIFI: controls whether Wi-Fi can be + * globally enabled or disabled + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WWAN: controls whether WWAN (3G) can be + * globally enabled or disabled + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIMAX: controls whether WiMAX can be + * globally enabled or disabled + * @NM_CLIENT_PERMISSION_SLEEP_WAKE: controls whether the client can ask + * NetworkManager to sleep and wake + * @NM_CLIENT_PERMISSION_NETWORK_CONTROL: controls whether networking connections + * can be started, stopped, and changed + * @NM_CLIENT_PERMISSION_WIFI_SHARE_PROTECTED: controls whether a password + * protected Wi-Fi hotspot can be created + * @NM_CLIENT_PERMISSION_WIFI_SHARE_OPEN: controls whether an open Wi-Fi hotspot + * can be created + * @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_SYSTEM: controls whether connections + * that are available to all users can be modified + * @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_OWN: controls whether connections + * owned by the current user can be modified + * @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_HOSTNAME: controls whether the + * persistent hostname can be changed + * @NM_CLIENT_PERMISSION_SETTINGS_MODIFY_GLOBAL_DNS: modify persistent global + * DNS configuration + * @NM_CLIENT_PERMISSION_RELOAD: controls access to Reload. + * @NM_CLIENT_PERMISSION_CHECKPOINT_ROLLBACK: permission to create checkpoints. + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_STATISTICS: controls whether device + * statistics can be globally enabled or disabled + * @NM_CLIENT_PERMISSION_ENABLE_DISABLE_CONNECTIVITY_CHECK: controls whether + * connectivity check can be enabled or disabled + * @NM_CLIENT_PERMISSION_WIFI_SCAN: controls whether wifi scans can be performed + * @NM_CLIENT_PERMISSION_LAST: a reserved boundary value + * + * #NMClientPermission values indicate various permissions that NetworkManager + * clients can obtain to perform certain tasks on behalf of the current user. + **/ +typedef enum { + NM_CLIENT_PERMISSION_NONE = 0, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_NETWORK = 1, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIFI = 2, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_WWAN = 3, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIMAX = 4, + NM_CLIENT_PERMISSION_SLEEP_WAKE = 5, + NM_CLIENT_PERMISSION_NETWORK_CONTROL = 6, + NM_CLIENT_PERMISSION_WIFI_SHARE_PROTECTED = 7, + NM_CLIENT_PERMISSION_WIFI_SHARE_OPEN = 8, + NM_CLIENT_PERMISSION_SETTINGS_MODIFY_SYSTEM = 9, + NM_CLIENT_PERMISSION_SETTINGS_MODIFY_OWN = 10, + NM_CLIENT_PERMISSION_SETTINGS_MODIFY_HOSTNAME = 11, + NM_CLIENT_PERMISSION_SETTINGS_MODIFY_GLOBAL_DNS = 12, + NM_CLIENT_PERMISSION_RELOAD = 13, + NM_CLIENT_PERMISSION_CHECKPOINT_ROLLBACK = 14, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_STATISTICS = 15, + NM_CLIENT_PERMISSION_ENABLE_DISABLE_CONNECTIVITY_CHECK = 16, + NM_CLIENT_PERMISSION_WIFI_SCAN = 17, + + NM_CLIENT_PERMISSION_LAST = 17, +} NMClientPermission; + +/** + * NMClientPermissionResult: + * @NM_CLIENT_PERMISSION_RESULT_UNKNOWN: unknown or no authorization + * @NM_CLIENT_PERMISSION_RESULT_YES: the permission is available + * @NM_CLIENT_PERMISSION_RESULT_AUTH: authorization is necessary before the + * permission is available + * @NM_CLIENT_PERMISSION_RESULT_NO: permission to perform the operation is + * denied by system policy + * + * #NMClientPermissionResult values indicate what authorizations and permissions + * the user requires to obtain a given #NMClientPermission + **/ +typedef enum { + NM_CLIENT_PERMISSION_RESULT_UNKNOWN = 0, + NM_CLIENT_PERMISSION_RESULT_YES, + NM_CLIENT_PERMISSION_RESULT_AUTH, + NM_CLIENT_PERMISSION_RESULT_NO +} NMClientPermissionResult; + +#endif /* __NM_DBUS_INTERFACE_H__ */ |