New upstream version 1.32.12 upstream/1.32.12

1 files changed, 36 insertions, 6 deletions

diff --git a/man/nm-settings-dbus.5 b/man/nm-settings-dbus.5
index 9212b57f..744929b3 100644
--- a/man/nm-settings-dbus.5
+++ b/man/nm-settings-dbus.5
@@ -2,12 +2,12 @@
 .\"     Title: nm-settings-dbus
 .\"    Author: 
 .\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
-.\"      Date: 07/16/2021
+.\"      Date: 09/22/2021
 .\"    Manual: Configuration
-.\"    Source: NetworkManager 1.30.6
+.\"    Source: NetworkManager 1.32.12
 .\"  Language: English
 .\"
-.TH "NM\-SETTINGS\-DBUS" "5" "" "NetworkManager 1\&.30\&.6" "Configuration"
+.TH "NM\-SETTINGS\-DBUS" "5" "" "NetworkManager 1\&.32\&.12" "Configuration"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -1922,6 +1922,7 @@ l l l l
 l l l l
 l l l l
 l l l l
+l l l l
 l l l l.
 T{
 address\-data
@@ -2122,6 +2123,15 @@ T}:T{
 If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager\&.
 T}
 T{
+required\-timeout
+T}:T{
+int32
+T}:T{
+\-1
+T}:T{
+The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds\&. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail\&. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e\&.g\&. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active\&. Note that if "may\-fail" is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout\&. A zero value means that no required timeout is present, \-1 means the default value (either configuration ipvx\&.required\-timeout override or zero)\&.
+T}
+T{
 route\-data
 T}:T{
 array of vardict
@@ -2202,6 +2212,7 @@ l l l l
 l l l l
 l l l l
 l l l l
+l l l l
 l l l l.
 T{
 addr\-gen\-mode
@@ -2411,6 +2422,15 @@ T}:T{
 A timeout for waiting Router Advertisements in seconds\&. If zero (the default), a globally configured default is used\&. If still unspecified, the timeout depends on the sysctl settings of the device\&. Set to 2147483647 (MAXINT32) for infinity\&.
 T}
 T{
+required\-timeout
+T}:T{
+int32
+T}:T{
+\-1
+T}:T{
+The minimum time interval in milliseconds for which dynamic IP configuration should be tried before the connection succeeds\&. This property is useful for example if both IPv4 and IPv6 are enabled and are allowed to fail\&. Normally the connection succeeds as soon as one of the two address families completes; by setting a required timeout for e\&.g\&. IPv4, one can ensure that even if IP6 succeeds earlier than IPv4, NetworkManager waits some time for IPv4 before the connection becomes active\&. Note that if "may\-fail" is FALSE for the same address family, this property has no effect as NetworkManager needs to wait for the full DHCP timeout\&. A zero value means that no required timeout is present, \-1 means the default value (either configuration ipvx\&.required\-timeout override or zero)\&.
+T}
+T{
 route\-data
 T}:T{
 array of vardict
@@ -2816,7 +2836,7 @@ array of string
 T}:T{
 \ \&
 T}:T{
-A list of kernel command line arguments to match\&. This may be used to check whether a specific kernel command line option is set (or if prefixed with the exclamation mark unset)\&. The argument must either be a single word, or an assignment (i\&.e\&. two words, separated "=")\&. In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment\&. In the latter case, the exact assignment is looked for with right and left hand side matching\&. See NMSettingMatch:interface\-name for how special characters \*(Aq|\*(Aq, \*(Aq&\*(Aq, \*(Aq!\*(Aq and \*(Aq\e\e\*(Aq are used for optional and mandatory matches and inverting the pattern\&.
+A list of kernel command line arguments to match\&. This may be used to check whether a specific kernel command line option is set (or unset, if prefixed with the exclamation mark)\&. The argument must either be a single word, or an assignment (i\&.e\&. two words, joined by "=")\&. In the former case the kernel command line is searched for the word appearing as is, or as left hand side of an assignment\&. In the latter case, the exact assignment is looked for with right and left hand side matching\&. Wildcard patterns are not supported\&. See NMSettingMatch:interface\-name for how special characters \*(Aq|\*(Aq, \*(Aq&\*(Aq, \*(Aq!\*(Aq and \*(Aq\e\e\*(Aq are used for optional and mandatory matches and inverting the match\&.
 T}
 T{
 path
@@ -2864,7 +2884,7 @@ byte array
 T}:T{
 \ \&
 T}:T{
-Anycast DHCP MAC address used when requesting an IP address via DHCP\&. The specific anycast address used determines which DHCP server class answers the request\&.
+Anycast DHCP MAC address used when requesting an IP address via DHCP\&. The specific anycast address used determines which DHCP server class answers the request\&. This is currently only implemented by dhclient DHCP plugin\&.
 T}
 T{
 ssid
@@ -4445,8 +4465,18 @@ l l l l
 l l l l
 l l l l
 l l l l
+l l l l
 l l l l.
 T{
+accept\-all\-mac\-addresses
+T}:T{
+NMTernary (int32)
+T}:T{
+\ \&
+T}:T{
+When TRUE, setup the interface to accept packets for all MAC addresses\&. This is enabling the kernel interface flag IFF_PROMISC\&. When FALSE, the interface will only accept the packets with the interface destination mac address or broadcast\&.
+T}
+T{
 assigned\-mac\-address
 T}:T{
 string
@@ -4979,7 +5009,7 @@ string
 T}:T{
 \ \&
 T}:T{
-Key management used for the connection\&.  One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa\-psk" (infrastructure WPA\-PSK), "sae" (SAE), "owe" (Opportunistic Wireless Encryption), "wpa\-eap" (WPA\-Enterprise) or "wpa\-eap\-suite\-b\-192" (WPA3\-Enterprise Suite B)\&. This property must be set for any Wi\-Fi connection that uses security\&.
+Key management used for the connection\&. One of "none" (WEP or no password protection), "ieee8021x" (Dynamic WEP), "owe" (Opportunistic Wireless Encryption), "wpa\-psk" (WPA2 + WPA3 personal), "sae" (WPA3 personal only), "wpa\-eap" (WPA2 + WPA3 enterprise) or "wpa\-eap\-suite\-b\-192" (WPA3 enterprise only)\&. This property must be set for any Wi\-Fi connection that uses security\&.
 T}
 T{
 leap\-password